示例#1
0
 def exec_AluReg(self, instr: AluReg, st):
     reg, new_reg = st.R[instr.reg], None
     if instr.op == AluRegOp.Swap:
         new_reg = BVConcat(BVExtract(reg, 0, 3), BVExtract(reg, 4, 7))
     if instr.op == AluRegOp.Lsr:
         new_reg = BVZExt(BVExtract(reg, 1, 7), 1)
     if new_reg is None:
         raise RuntimeError(
             f"TODO: implement AluReg instruction: {instr.op}")
     return st.update(R=st.R.update(instr.reg, new_reg))
示例#2
0
 def _arith(op, a, b, c):
     a9, b9, c9 = BVZExt(a, 1), BVZExt(b, 1), BVZExt(c, 8)
     op = {AluImmOp.Sub: AluOp.Sub}.get(op, op)
     res = {
         AluOp.Adc: lambda: BVAdd(BVAdd(a9, b9), c9),
         AluOp.Add: lambda: BVAdd(a9, b9),
         AluOp.Sbc: lambda: BVSub(BVSub(a9, b9), c9),
         AluOp.Sub: lambda: BVSub(a9, b9),
     }[op]()
     res8 = BVExtract(res, 0, 7)
     z = BVComp(res8, BitVecVal(0, 8))
     c = BVExtract(res, 8, 8)
     return res8, z, c
示例#3
0
文件: modules.py 项目: pllab/CoSA
 def Slice(in_, out, low, high):
     # INVAR: (extract low high in) = out
     high -= 1
     vars_ = [in_,out, low, high]
     comment = "Mux (in, out, low, high) = (%s, %s, %s, %s)"%(tuple([str(x) for x in vars_]))
     Logger.log(comment, 3)
     invar = EqualsOrIff(BVExtract(in_, low, high), out)
     ts = TS(comment)
     ts.vars, ts.invar = set([in_, out]), invar
     return ts
示例#4
0
 def place_instr(loc, instr, st) -> MachineState:
     # make sure PC fits into two registers
     assert loc & 0xffff == loc
     msb, lsb = BitVecVal(loc >> 8, 8), BitVecVal(loc & 0xff, 8)
     st = st.update(R=st.R.update(10, lsb).update(11, msb))
     instr_parts = [
         BVExtract(instr, *jj)
         for jj in ((jj * 8, jj * 8 + 7) for jj in range(4))
     ]
     if isinstance(loc, int):
         instr_locs = [loc + ii for ii in range(4)]
     else:
         assert False, "TODO: support symbolic address"
     mem = st.MEM
     for loc, val in zip(instr_locs, instr_parts):
         mem = mem.update(loc, val)
     return st.update(MEM=mem)
示例#5
0
 def extract(self):
     for l in self.all_bv_numbers():
         for s in xrange(0, self.width):
             for e in xrange(s, self.width):
                 self.check(BVExtract(l, start=s, end=e))
示例#6
0
文件: btor2.py 项目: yuex1994/CoSA
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        # list of tuples of var and cond_assign_list
        # cond_assign_list is tuples of (condition, value)
        # where everything is a pysmt FNode
        # for btor, the condition is always True
        ftrans = []

        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        prop_count = 0

        # clean string input, remove special characters from names
        for sc, rep in special_char_replacements.items():
            strinput = strinput.replace(sc, rep)

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0,1), BV(1,1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]), getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width)-1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDXOR:
                width = get_type(getnode(nids[1])).width
                nodemap[nid] = BV(0, width)
                zeros = BV(0, width)
                for yx_i in range(width):
                  tmp = BV(1 << yx_i, width)
                  tmp_2 = BVAnd(tmp, B2BV(getnode(nids[1])))
                  tmp_3 = BVZExt(B2BV(BVComp(tmp_2, zeros)), int(width - 1))
                  nodemap[nid] = BVAdd(tmp_3, nodemap[nid])
                nodemap[nid] = BVComp(BVAnd(BV(1, width), nodemap[nid]), BV(1, width))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width)-1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(bin_to_dec(nids[1]), width)

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                # unfortunately we need to create an extra symbol just to have the output name
                # we could be smarter about this, but then this parser can't be greedy
                original_symbol = getnode(nids[0])
                output_symbol = Symbol(nids[1], original_symbol.get_type())
                nodemap[nid] = EqualsOrIff(output_symbol, original_symbol)
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(output_symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]), getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2]))

            if ntype == XNOR:
                nodemap[nid] = BVNot(binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2])))

            if ntype == NAND:
                bvop = lambda x,y: BVNot(BVAnd(x, y))
                bop = lambda x,y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]), getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == NEG:
                nodemap[nid] = unary_op(BVNeg, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == SEXT:
                nodemap[nid] = BVSExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]), getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SGT:
                nodemap[nid] = BVSGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SGTE:
                nodemap[nid] = BVSGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLT:
                nodemap[nid] = BVSLT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLTE:
                nodemap[nid] = BVSLE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == NEQ:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]), int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), B2BV(getnode(nids[2])), B2BV(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = BV2B(getnode(nids[2]))
                else:
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = getnode(nids[2])

                nodemap[nid] = EqualsOrIff(lval, rval)

                ftrans.append(
                     (lval,
                     [(TRUE(), rval)])
                )

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]), getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])

                if ASSERTINFO in line:
                    filename_lineno = os.path.basename(nids[3])
                    assert_name = 'embedded_assertion_%s'%filename_lineno
                    description = "Embedded assertion at line {1} in {0}".format(*filename_lineno.split(COLON_REP))
                else:
                    assert_name = 'embedded_assertion_%i'%prop_count
                    description = 'Embedded assertion number %i'%prop_count
                    prop_count += 1

                # Following problem format (name, description, strformula)
                invar_props.append((assert_name, description, Not(BV2B(getnode(nid)))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\""%ntype)

            # get wirename if it exists
            if ntype not in {STATE, INPUT, OUTPUT, BAD}:
                # check for wirename, if it's an integer, then it's a node ref
                try:
                    a = int(nids[-1])
                except:
                    try:
                        wire = Symbol(str(nids[-1]), getnode(nids[0]))
                        invarlist.append(EqualsOrIff(wire, B2BV(nodemap[nid])))
                        ts.add_var(wire)
                    except:
                        pass

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\""%",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()

        invar = simplify(And(invarlist))

        # instead of trans, we're using the ftrans format -- see below
        ts.set_behavior(init, TRUE(), invar)

        # add ftrans
        for var, cond_assign_list in ftrans:
            ts.add_func_trans(var, cond_assign_list)

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
示例#7
0
def get_full_example_formulae(environment=None):
    """Return a list of Examples using the given environment."""

    if environment is None:
        environment = get_env()

    with environment:
        x = Symbol("x", BOOL)
        y = Symbol("y", BOOL)
        p = Symbol("p", INT)
        q = Symbol("q", INT)
        r = Symbol("r", REAL)
        s = Symbol("s", REAL)
        aii = Symbol("aii", ARRAY_INT_INT)
        ari = Symbol("ari", ArrayType(REAL, INT))
        arb = Symbol("arb", ArrayType(REAL, BV8))
        abb = Symbol("abb", ArrayType(BV8, BV8))
        nested_a = Symbol("a_arb_aii",
                          ArrayType(ArrayType(REAL, BV8), ARRAY_INT_INT))

        rf = Symbol("rf", FunctionType(REAL, [REAL, REAL]))
        rg = Symbol("rg", FunctionType(REAL, [REAL]))

        ih = Symbol("ih", FunctionType(INT, [REAL, INT]))
        ig = Symbol("ig", FunctionType(INT, [INT]))

        bf = Symbol("bf", FunctionType(BOOL, [BOOL]))
        bg = Symbol("bg", FunctionType(BOOL, [BOOL]))

        bv8 = Symbol("bv1", BV8)
        bv16 = Symbol("bv2", BV16)

        result = [
            # Formula, is_valid, is_sat, is_qf
            Example(hr="(x & y)",
                    expr=And(x, y),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),
            Example(hr="(x <-> y)",
                    expr=Iff(x, y),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),
            Example(hr="((x | y) & (! (x | y)))",
                    expr=And(Or(x, y), Not(Or(x, y))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BOOL),
            Example(hr="(x & (! y))",
                    expr=And(x, Not(y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),
            Example(hr="(False -> True)",
                    expr=Implies(FALSE(), TRUE()),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),

            #
            #  LIA
            #
            Example(hr="((q < p) & (x -> y))",
                    expr=And(GT(p, q), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_IDL),
            Example(hr="(((p + q) = 5) & (q < p))",
                    expr=And(Equals(Plus(p, q), Int(5)), GT(p, q)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            Example(hr="((q <= p) | (p <= q))",
                    expr=Or(GE(p, q), LE(p, q)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_IDL),
            Example(hr="(! (p < (q * 2)))",
                    expr=Not(LT(p, Times(q, Int(2)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            Example(hr="(p < (p - (5 - 2)))",
                    expr=GT(Minus(p, Minus(Int(5), Int(2))), p),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_IDL),
            Example(hr="((x ? 7 : ((p + -1) * 3)) = q)",
                    expr=Equals(
                        Ite(x, Int(7), Times(Plus(p, Int(-1)), Int(3))), q),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            Example(hr="(p < (q + 1))",
                    expr=LT(p, Plus(q, Int(1))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),

            #
            # LRA
            #
            Example(hr="((s < r) & (x -> y))",
                    expr=And(GT(r, s), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),
            Example(hr="(((r + s) = 28/5) & (s < r))",
                    expr=And(Equals(Plus(r, s), Real(Fraction("5.6"))),
                             GT(r, s)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),
            Example(hr="((s <= r) | (r <= s))",
                    expr=Or(GE(r, s), LE(r, s)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),
            Example(hr="(! ((r * 2.0) < (s * 2.0)))",
                    expr=Not(LT(Div(r, Real((1, 2))), Times(s, Real(2)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),
            Example(hr="(! (r < (r - (5.0 - 2.0))))",
                    expr=Not(GT(Minus(r, Minus(Real(5), Real(2))), r)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),
            Example(hr="((x ? 7.0 : ((s + -1.0) * 3.0)) = r)",
                    expr=Equals(
                        Ite(x, Real(7), Times(Plus(s, Real(-1)), Real(3))), r),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),

            #
            # EUF
            #
            Example(hr="(bf(x) <-> bg(x))",
                    expr=Iff(Function(bf, (x, )), Function(bg, (x, ))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_UF),
            Example(hr="(rf(5.0, rg(r)) = 0.0)",
                    expr=Equals(Function(rf, (Real(5), Function(rg, (r, )))),
                                Real(0)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLRA),
            Example(hr="((rg(r) = (5.0 + 2.0)) <-> (rg(r) = 7.0))",
                    expr=Iff(Equals(Function(rg, [r]), Plus(Real(5), Real(2))),
                             Equals(Function(rg, [r]), Real(7))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLRA),
            Example(
                hr="((r = (s + 1.0)) & (rg(s) = 5.0) & (rg((r - 1.0)) = 7.0))",
                expr=And([
                    Equals(r, Plus(s, Real(1))),
                    Equals(Function(rg, [s]), Real(5)),
                    Equals(Function(rg, [Minus(r, Real(1))]), Real(7))
                ]),
                is_valid=False,
                is_sat=False,
                logic=pysmt.logics.QF_UFLRA),

            #
            # BV
            #
            Example(hr="((1_32 & 0_32) = 0_32)",
                    expr=Equals(BVAnd(BVOne(32), BVZero(32)), BVZero(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((! 2_3) = 5_3)",
                    expr=Equals(BVNot(BV("010")), BV("101")),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((7_3 xor 0_3) = 0_3)",
                    expr=Equals(BVXor(BV("111"), BV("000")), BV("000")),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv1::bv1) u< 0_16)",
                    expr=BVULT(BVConcat(bv8, bv8), BVZero(16)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(1_32[0:7] = 1_8)",
                    expr=Equals(BVExtract(BVOne(32), end=7), BVOne(8)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(0_8 u< (((bv1 + 1_8) * 5_8) u/ 5_8))",
                    expr=BVUGT(
                        BVUDiv(BVMul(BVAdd(bv8, BVOne(8)), BV(5, width=8)),
                               BV(5, width=8)), BVZero(8)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(0_16 u<= bv2)",
                    expr=BVUGE(bv16, BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(0_16 s<= bv2)",
                    expr=BVSGE(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(
                hr="((0_32 u< (5_32 u% 2_32)) & ((5_32 u% 2_32) u<= 1_32))",
                expr=And(
                    BVUGT(BVURem(BV(5, width=32), BV(2, width=32)),
                          BVZero(32)),
                    BVULE(BVURem(BV(5, width=32), BV(2, width=32)),
                          BVOne(32))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.QF_BV),
            Example(hr="((((1_32 + (- 1_32)) << 1_32) >> 1_32) = 1_32)",
                    expr=Equals(
                        BVLShr(BVLShl(BVAdd(BVOne(32), BVNeg(BVOne(32))), 1),
                               1), BVOne(32)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((1_32 - 1_32) = 0_32)",
                    expr=Equals(BVSub(BVOne(32), BVOne(32)), BVZero(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # Rotations
            Example(hr="(((1_32 ROL 1) ROR 1) = 1_32)",
                    expr=Equals(BVRor(BVRol(BVOne(32), 1), 1), BVOne(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # Extensions
            Example(hr="((0_5 ZEXT 11) = (0_1 SEXT 15))",
                    expr=Equals(BVZExt(BVZero(5), 11), BVSExt(BVZero(1), 15)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 - bv2) = 0_16)",
                    expr=Equals(BVSub(bv16, bv16), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 - bv2)[0:7] = bv1)",
                    expr=Equals(BVExtract(BVSub(bv16, bv16), 0, 7), bv8),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2[0:7] bvcomp bv1) = 1_1)",
                    expr=Equals(BVComp(BVExtract(bv16, 0, 7), bv8), BVOne(1)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 bvcomp bv2) = 0_1)",
                    expr=Equals(BVComp(bv16, bv16), BVZero(1)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(bv2 s< bv2)",
                    expr=BVSLT(bv16, bv16),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(bv2 s< 0_16)",
                    expr=BVSLT(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 s< 0_16) | (0_16 s<= bv2))",
                    expr=Or(BVSGT(BVZero(16), bv16), BVSGE(bv16, BVZero(16))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(bv2 u< bv2)",
                    expr=BVULT(bv16, bv16),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="(bv2 u< 0_16)",
                    expr=BVULT(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 | 0_16) = bv2)",
                    expr=Equals(BVOr(bv16, BVZero(16)), bv16),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 & 0_16) = 0_16)",
                    expr=Equals(BVAnd(bv16, BVZero(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((0_16 s< bv2) & ((bv2 s/ 65535_16) s< 0_16))",
                    expr=And(BVSLT(BVZero(16), bv16),
                             BVSLT(BVSDiv(bv16, SBV(-1, 16)), BVZero(16))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((0_16 s< bv2) & ((bv2 s% 1_16) s< 0_16))",
                    expr=And(BVSLT(BVZero(16), bv16),
                             BVSLT(BVSRem(bv16, BVOne(16)), BVZero(16))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 u% 1_16) = 0_16)",
                    expr=Equals(BVURem(bv16, BVOne(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 s% 1_16) = 0_16)",
                    expr=Equals(BVSRem(bv16, BVOne(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 s% (- 1_16)) = 0_16)",
                    expr=Equals(BVSRem(bv16, BVNeg(BVOne(16))), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((bv2 a>> 0_16) = bv2)",
                    expr=Equals(BVAShr(bv16, BVZero(16)), bv16),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            Example(hr="((0_16 s<= bv2) & ((bv2 a>> 1_16) = (bv2 >> 1_16)))",
                    expr=And(
                        BVSLE(BVZero(16), bv16),
                        Equals(BVAShr(bv16, BVOne(16)),
                               BVLShr(bv16, BVOne(16)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),
            #
            # Quantification
            #
            Example(hr="(forall y . (x -> y))",
                    expr=ForAll([y], Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.BOOL),
            Example(hr="(forall p, q . ((p + q) = 0))",
                    expr=ForAll([p, q], Equals(Plus(p, q), Int(0))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LIA),
            Example(
                hr="(forall r, s . (((0.0 < r) & (0.0 < s)) -> ((r - s) < r)))",
                expr=ForAll([r, s],
                            Implies(And(GT(r, Real(0)), GT(s, Real(0))),
                                    (LT(Minus(r, s), r)))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.LRA),
            Example(hr="(exists x, y . (x -> y))",
                    expr=Exists([x, y], Implies(x, y)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.BOOL),
            Example(hr="(exists p, q . ((p + q) = 0))",
                    expr=Exists([p, q], Equals(Plus(p, q), Int(0))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.LIA),
            Example(hr="(exists r . (forall s . (r < (r - s))))",
                    expr=Exists([r], ForAll([s], GT(Minus(r, s), r))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LRA),
            Example(hr="(forall r . (exists s . (r < (r - s))))",
                    expr=ForAll([r], Exists([s], GT(Minus(r, s), r))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.LRA),
            Example(hr="(x & (forall r . ((r + s) = 5.0)))",
                    expr=And(x, ForAll([r], Equals(Plus(r, s), Real(5)))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LRA),
            Example(hr="(exists x . ((x <-> (5.0 < s)) & (s < 3.0)))",
                    expr=Exists([x],
                                (And(Iff(x, GT(s, Real(5))), LT(s, Real(3))))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.LRA),

            #
            # UFLIRA
            #
            Example(hr="((p < ih(r, q)) & (x -> y))",
                    expr=And(GT(Function(ih, (r, q)), p), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLIRA),
            Example(
                hr=
                "(((p - 3) = q) -> ((p < ih(r, (q + 3))) | (ih(r, p) <= p)))",
                expr=Implies(
                    Equals(Minus(p, Int(3)), q),
                    Or(GT(Function(ih, (r, Plus(q, Int(3)))), p),
                       LE(Function(ih, (r, p)), p))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.QF_UFLIRA),
            Example(
                hr=
                "(((ToReal((p - 3)) = r) & (ToReal(q) = r)) -> ((p < ih(ToReal((p - 3)), (q + 3))) | (ih(r, p) <= p)))",
                expr=Implies(
                    And(Equals(ToReal(Minus(p, Int(3))), r),
                        Equals(ToReal(q), r)),
                    Or(
                        GT(
                            Function(
                                ih,
                                (ToReal(Minus(p, Int(3))), Plus(q, Int(3)))),
                            p), LE(Function(ih, (r, p)), p))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.QF_UFLIRA),
            Example(
                hr=
                "(! (((ToReal((p - 3)) = r) & (ToReal(q) = r)) -> ((p < ih(ToReal((p - 3)), (q + 3))) | (ih(r, p) <= p))))",
                expr=Not(
                    Implies(
                        And(Equals(ToReal(Minus(p, Int(3))), r),
                            Equals(ToReal(q), r)),
                        Or(
                            GT(
                                Function(ih, (ToReal(Minus(
                                    p, Int(3))), Plus(q, Int(3)))), p),
                            LE(Function(ih, (r, p)), p)))),
                is_valid=False,
                is_sat=False,
                logic=pysmt.logics.QF_UFLIRA),
            Example(
                hr=
                """("Did you know that any string works? #yolo" & "10" & "|#somesolverskeepthe||" & " ")""",
                expr=And(Symbol("Did you know that any string works? #yolo"),
                         Symbol("10"), Symbol("|#somesolverskeepthe||"),
                         Symbol(" ")),
                is_valid=False,
                is_sat=True,
                logic=pysmt.logics.QF_BOOL),

            #
            # Arrays
            #
            Example(hr="((q = 0) -> (aii[0 := 0] = aii[0 := q]))",
                    expr=Implies(
                        Equals(q, Int(0)),
                        Equals(Store(aii, Int(0), Int(0)),
                               Store(aii, Int(0), q))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_ALIA),
            Example(hr="(aii[0 := 0][0] = 0)",
                    expr=Equals(Select(Store(aii, Int(0), Int(0)), Int(0)),
                                Int(0)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_ALIA),
            Example(hr="((Array{Int, Int}(0)[1 := 1] = aii) & (aii[1] = 0))",
                    expr=And(Equals(Array(INT, Int(0), {Int(1): Int(1)}), aii),
                             Equals(Select(aii, Int(1)), Int(0))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.get_logic_by_name("QF_ALIA*")),
            Example(hr="((Array{Int, Int}(0)[1 := 3] = aii) & (aii[1] = 3))",
                    expr=And(Equals(Array(INT, Int(0), {Int(1): Int(3)}), aii),
                             Equals(Select(aii, Int(1)), Int(3))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.get_logic_by_name("QF_ALIA*")),
            Example(hr="((Array{Real, Int}(10) = ari) & (ari[6/5] = 0))",
                    expr=And(Equals(Array(REAL, Int(10)), ari),
                             Equals(Select(ari, Real((6, 5))), Int(0))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.get_logic_by_name("QF_AUFBVLIRA*")),
            Example(
                hr=
                "((Array{Real, Int}(0)[1.0 := 10][2.0 := 20][3.0 := 30][4.0 := 40] = ari) & (! ((ari[0.0] = 0) & (ari[1.0] = 10) & (ari[2.0] = 20) & (ari[3.0] = 30) & (ari[4.0] = 40))))",
                expr=And(
                    Equals(
                        Array(
                            REAL, Int(0), {
                                Real(1): Int(10),
                                Real(2): Int(20),
                                Real(3): Int(30),
                                Real(4): Int(40)
                            }), ari),
                    Not(
                        And(Equals(Select(ari, Real(0)), Int(0)),
                            Equals(Select(ari, Real(1)), Int(10)),
                            Equals(Select(ari, Real(2)), Int(20)),
                            Equals(Select(ari, Real(3)), Int(30)),
                            Equals(Select(ari, Real(4)), Int(40))))),
                is_valid=False,
                is_sat=False,
                logic=pysmt.logics.get_logic_by_name("QF_AUFBVLIRA*")),
            Example(
                hr=
                "((Array{Real, Int}(0)[1.0 := 10][2.0 := 20][3.0 := 30][4.0 := 40][5.0 := 50] = ari) & (! ((ari[0.0] = 0) & (ari[1.0] = 10) & (ari[2.0] = 20) & (ari[3.0] = 30) & (ari[4.0] = 40) & (ari[5.0] = 50))))",
                expr=And(
                    Equals(
                        Array(
                            REAL, Int(0), {
                                Real(1): Int(10),
                                Real(2): Int(20),
                                Real(3): Int(30),
                                Real(4): Int(40),
                                Real(5): Int(50)
                            }), ari),
                    Not(
                        And(Equals(Select(ari, Real(0)), Int(0)),
                            Equals(Select(ari, Real(1)), Int(10)),
                            Equals(Select(ari, Real(2)), Int(20)),
                            Equals(Select(ari, Real(3)), Int(30)),
                            Equals(Select(ari, Real(4)), Int(40)),
                            Equals(Select(ari, Real(5)), Int(50))))),
                is_valid=False,
                is_sat=False,
                logic=pysmt.logics.get_logic_by_name("QF_AUFBVLIRA*")),
            Example(
                hr=
                "((a_arb_aii = Array{Array{Real, BV{8}}, Array{Int, Int}}(Array{Int, Int}(7))) -> (a_arb_aii[arb][42] = 7))",
                expr=Implies(
                    Equals(nested_a,
                           Array(ArrayType(REAL, BV8), Array(INT, Int(7)))),
                    Equals(Select(Select(nested_a, arb), Int(42)), Int(7))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.get_logic_by_name("QF_AUFBVLIRA*")),
            Example(hr="(abb[bv1 := y_][bv1 := z_] = abb[bv1 := z_])",
                    expr=Equals(
                        Store(Store(abb, bv8, Symbol("y_", BV8)), bv8,
                              Symbol("z_", BV8)),
                        Store(abb, bv8, Symbol("z_", BV8))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_ABV),
            Example(hr="((r / s) = (r * s))",
                    expr=Equals(Div(r, s), Times(r, s)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NRA),
            Example(hr="(2.0 = (r * r))",
                    expr=Equals(Real(2), Times(r, r)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NRA),
            Example(hr="((p ^ 2) = 0)",
                    expr=Equals(Pow(p, Int(2)), Int(0)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NIA),
            Example(hr="((r ^ 2.0) = 0.0)",
                    expr=Equals(Pow(r, Real(2)), Real(0)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NRA),
            Example(hr="((r * r * r) = 25.0)",
                    expr=Equals(Times(r, r, r), Real(25)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NRA),
            Example(hr="((5.0 * r * 5.0) = 25.0)",
                    expr=Equals(Times(Real(5), r, Real(5)), Real(25)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),
            Example(hr="((p * p * p) = 25)",
                    expr=Equals(Times(p, p, p), Int(25)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_NIA),
            Example(hr="((5 * p * 5) = 25)",
                    expr=Equals(Times(Int(5), p, Int(5)), Int(25)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            Example(hr="(((1 - 1) * p * 1) = 0)",
                    expr=Equals(Times(Minus(Int(1), Int(1)), p, Int(1)),
                                Int(0)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),

            # Huge Fractions:
            Example(
                hr=
                "((r * 1606938044258990275541962092341162602522202993782792835301376/7) = -20480000000000000000000000.0)",
                expr=Equals(Times(r, Real(Fraction(2**200, 7))),
                            Real(-200**11)),
                is_valid=False,
                is_sat=True,
                logic=pysmt.logics.QF_LRA),
            Example(hr="(((r + 5.0 + s) * (s + 2.0 + r)) = 0.0)",
                    expr=Equals(
                        Times(Plus(r, Real(5), s), Plus(s, Real(2), r)),
                        Real(0)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_NRA),
            Example(
                hr=
                "(((p + 5 + q) * (p - (q - 5))) = ((p * p) + (10 * p) + 25 + (-1 * q * q)))",
                expr=Equals(
                    Times(Plus(p, Int(5), q), Minus(p, Minus(q, Int(5)))),
                    Plus(Times(p, p), Times(Int(10), p), Int(25),
                         Times(Int(-1), q, q))),
                is_valid=True,
                is_sat=True,
                logic=pysmt.logics.QF_NIA),
        ]
    return result
示例#8
0
文件: btor2.py 项目: pllab/CoSA
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        # list of tuples of var and cond_assign_list
        # cond_assign_list is tuples of (condition, value)
        # where everything is a pysmt FNode
        # for btor, the condition is always True
        ftrans = []

        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        prop_count = 0

        # clean string input, remove special characters from names
        for sc, rep in special_char_replacements.items():
            strinput = strinput.replace(sc, rep)

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0, 1), BV(1, 1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]),
                                             getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width) - 1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width) - 1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                try:
                    nodemap[nid] = BV(bin_to_dec(nids[1]), width)
                except ValueError:
                    if not all([i == 'x' or i == 'z' for i in nids[1]]):
                        raise RuntimeError(
                            "If not a valid number, only support "
                            "all don't cares or high-impedance but got {}".
                            format(nids[1]))
                    # create a fresh variable for this non-deterministic constant
                    nodemap[nid] = Symbol('const_' + nids[1], BVType(width))
                    ts.add_state_var(nodemap[nid])
                    Logger.warning(
                        "Creating a fresh symbol for unsupported X/Z constant %s"
                        % nids[1])

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN % nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN % nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                # unfortunately we need to create an extra symbol just to have the output name
                # we could be smarter about this, but then this parser can't be greedy
                original_symbol = B2BV(getnode(nids[0]))
                output_symbol = Symbol(nids[1], original_symbol.get_type())
                nodemap[nid] = EqualsOrIff(output_symbol, original_symbol)
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(output_symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])),
                                        B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == XNOR:
                nodemap[nid] = BVNot(
                    binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2])))

            if ntype == NAND:
                bvop = lambda x, y: BVNot(BVAnd(x, y))
                bop = lambda x, y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == NEG:
                nodemap[nid] = unary_op(BVNeg, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == SEXT:
                nodemap[nid] = BVSExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]),
                                         getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SGT:
                nodemap[nid] = BVSGT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SGTE:
                nodemap[nid] = BVSGE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLT:
                nodemap[nid] = BVSLT(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLTE:
                nodemap[nid] = BVSLE(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(B2BV(getnode(nids[1])),
                                      B2BV(getnode(nids[2])))

            if ntype == NEQ:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]),
                                            getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])),
                                     B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]),
                                         int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(
                        getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])),
                                       B2BV(getnode(nids[2])),
                                       B2BV(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])),
                                       getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(
                        getnode(nids[2])) == BOOL):
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = B2BV(getnode(nids[2]))
                else:
                    lval = TS.get_prime(getnode(nids[1]))
                    rval = getnode(nids[2])

                nodemap[nid] = EqualsOrIff(lval, rval)

                ftrans.append((lval, [(TRUE(), rval)]))

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(
                        getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])),
                                               BV2B(getnode(nids[2])))
                elif get_type(getnode(nids[1])).is_array_type():
                    _type = get_type(getnode(nids[1]))
                    nodemap[nid] = EqualsOrIff(
                        getnode(nids[1]),
                        Array(_type.index_type, default=getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]),
                                               getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])

                if len(nids) > 1:
                    assert_name = nids[1]
                    description = "Embedded assertion: {}".format(assert_name)
                else:
                    assert_name = 'embedded_assertion_%i' % prop_count
                    description = 'Embedded assertion number %i' % prop_count
                    prop_count += 1

                # Following problem format (name, description, strformula)
                invar_props.append(
                    (assert_name, description, Not(BV2B(getnode(nid)))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\"" % ntype)

            # get wirename if it exists
            if ntype not in {STATE, INPUT, OUTPUT, BAD}:
                # disregard comments at the end of the line
                try:
                    symbol_idx = nids.index(';')
                    symbol_idx -= 1  # the symbol should be before the comment
                except:
                    # the symbol is just the end
                    symbol_idx = -1

                # check for wirename, if it's an integer, then it's a node ref
                try:
                    a = int(nids[symbol_idx])
                except:
                    try:
                        name = str(nids[symbol_idx])
                        # use the exact name, unless it has already been used
                        wire = Symbol(name, getnode(nids[0]))
                        if wire in ts.vars:
                            wire = FreshSymbol(getnode(nids[0]),
                                               template=name + "%d")
                        invarlist.append(EqualsOrIff(wire, B2BV(nodemap[nid])))
                        ts.add_var(wire)
                    except:
                        pass

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\"" % ",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()

        invar = simplify(And(invarlist))

        # instead of trans, we're using the ftrans format -- see below
        ts.set_behavior(init, TRUE(), invar)

        # add ftrans
        for var, cond_assign_list in ftrans:
            ts.add_func_trans(var, cond_assign_list)

        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
示例#9
0
def vlog_match_widths(left: FNode,
                      right: FNode,
                      extend=False) -> Tuple[FNode, FNode]:
    '''
    Match the bit-widths for assignment using the Verilog standard semantics.

    if extend:
       zero extend to largest width
    else:
       left_width == right_width: no change
       left_width > right_width: right side is zero extended or sign extended depending on signedness
       left_width < right_width: right side is truncated (MSBs removed)
    '''
    assert type(left) == FNode and get_type(
        left).is_bv_type(), "Expecting a bit-vector"
    assert type(right) == FNode and get_type(
        right).is_bv_type(), "Expecting a bit-vector"

    left_width, right_width = left.bv_width(), right.bv_width()

    if left_width == right_width:
        pass
    elif left_width > right_width:
        # TODO: Check signed-ness of right-side

        fun = None
        padding = 0

        # handle ops with overflow:
        if right.is_bv_add():
            fun = BVAdd
            padding = 1
        elif right.is_bv_mul():
            fun = BVMul
            padding = 1
        elif right.is_bv_lshl():
            fun = BVLShl
            padding = left_width - right_width

        assert padding >= 0, "Expecting a non-negative padding"

        # TODO: Handle signed values here as well
        # re-build the node
        if padding > 0:
            args = [BVZExt(a, padding) for a in right.args()]
            right = fun(*args)

        # re-evauluate left_width and right_width, in case they're updated
        left_width, right_width = left.bv_width(), right.bv_width()

        assert left_width >= right_width, "Unexpected bitwidth mismatch"

        if left_width > right_width:
            right = BVZExt(right, left_width - right_width)

    else:
        if extend:
            left = BVZExt(left, right_width - left_width)
        else:
            right = BVExtract(right, 0, left_width - 1)

    return simplify(left), simplify(right)
示例#10
0
def get_example_formulae(environment=None):
    if environment is None:
        environment = get_env()

    with environment:
        x = Symbol("x", BOOL)
        y = Symbol("y", BOOL)
        p = Symbol("p", INT)
        q = Symbol("q", INT)
        r = Symbol("r", REAL)
        s = Symbol("s", REAL)

        rf = Symbol("rf", FunctionType(REAL, [REAL, REAL]))
        rg = Symbol("rg", FunctionType(REAL, [REAL]))

        ih = Symbol("ih", FunctionType(INT, [REAL, INT]))
        ig = Symbol("ig", FunctionType(INT, [INT]))

        bv8 = Symbol("bv1", BV8)
        bv16 = Symbol("bv2", BV16)

        result = [
            # Formula, is_valid, is_sat, is_qf
            # x /\ y
            Example(expr=And(x, y),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),

            # x <-> y
            Example(expr=Iff(x, y),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),

            # (x \/ y )  /\ ! ( x \/ y )
            Example(expr=And(Or(x, y), Not(Or(x, y))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BOOL),

            # (x /\ !y)
            Example(expr=And(x, Not(y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),

            # False -> True
            Example(expr=Implies(FALSE(), TRUE()),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),

            #
            #  LIA
            #
            # (p > q) /\ x -> y
            Example(expr=And(GT(p, q), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_IDL),

            # (p + q) = 5 /\ (p > q)
            Example(expr=And(Equals(Plus(p, q), Int(5)), GT(p, q)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),

            # (p >= q) \/ ( p <= q)
            Example(expr=Or(GE(p, q), LE(p, q)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_IDL),

            # !( p < q * 2 )
            Example(expr=Not(LT(p, Times(q, Int(2)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),

            # p - (5 - 2) > p
            Example(expr=GT(Minus(p, Minus(Int(5), Int(2))), p),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_IDL),

            # x ? 7: (p + -1) * 3 = q
            Example(expr=Equals(
                Ite(x, Int(7), Times(Plus(p, Int(-1)), Int(3))), q),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            Example(expr=LT(p, Plus(q, Int(1))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LIA),
            #
            # LRA
            #
            # (r > s) /\ x -> y
            Example(expr=And(GT(r, s), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),

            # (r + s) = 5.6 /\ (r > s)
            Example(expr=And(Equals(Plus(r, s), Real(Fraction("5.6"))),
                             GT(r, s)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),

            # (r >= s) \/ ( r <= s)
            Example(expr=Or(GE(r, s), LE(r, s)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),

            # !( (r / (1/2)) < s * 2 )
            Example(expr=Not(LT(Div(r, Real((1, 2))), Times(s, Real(2)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),

            # ! ( r - (5 - 2) > r )
            Example(expr=Not(GT(Minus(r, Minus(Real(5), Real(2))), r)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_RDL),

            # x ? 7: (s + -1) * 3 = r
            Example(expr=Equals(
                Ite(x, Real(7), Times(Plus(s, Real(-1)), Real(3))), r),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_LRA),

            #
            # EUF
            #

            # rf(5, rg(2)) = 0
            Example(expr=Equals(Function(rf, (Real(5), Function(rg, (r, )))),
                                Real(0)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLRA),

            # (rg(r) = 5 + 2) <-> (rg(r) = 7)
            Example(expr=Iff(Equals(Function(rg, [r]), Plus(Real(5), Real(2))),
                             Equals(Function(rg, [r]), Real(7))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLRA),

            # (r = s + 1) & (rg(s) = 5) & (rg(r - 1) = 7)
            Example(expr=And([
                Equals(r, Plus(s, Real(1))),
                Equals(Function(rg, [s]), Real(5)),
                Equals(Function(rg, [Minus(r, Real(1))]), Real(7))
            ]),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_UFLRA),

            #
            # BV
            #

            # bv_one & bv_zero == bv_zero
            Example(expr=Equals(BVAnd(BVOne(32), BVZero(32)), BVZero(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # ~(010) == 101
            Example(expr=Equals(BVNot(BV("010")), BV("101")),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # "111" xor "000" == "000"
            Example(expr=Equals(BVXor(BV("111"), BV("000")), BV("000")),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # bv8 :: bv8 < bv_zero
            Example(expr=BVULT(BVConcat(bv8, bv8), BVZero(16)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # bv_one[:7] == bv_one
            Example(expr=Equals(BVExtract(BVOne(32), end=7), BVOne(8)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (((bv8 + bv_one) * bv(5)) / bv(5)) > bv(0)
            Example(expr=BVUGT(
                BVUDiv(BVMul(BVAdd(bv8, BVOne(8)), BV(5, width=8)),
                       BV(5, width=8)), BVZero(8)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 >=u bv(0)
            Example(expr=BVUGE(bv16, BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 >=s bv(0)
            Example(expr=BVSGE(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (BV(5) rem BV(2) > bv_zero) /\ (BV(5) rem BV(2) < bv_one)
            Example(expr=And(
                BVUGT(BVURem(BV(5, width=32), BV(2, width=32)), BVZero(32)),
                BVULE(BVURem(BV(5, width=32), BV(2, width=32)), BVOne(32))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # ((bv_one + (- bv_one)) << 1) >> 1 == bv_one
            Example(expr=Equals(
                BVLShr(BVLShl(BVAdd(BVOne(32), BVNeg(BVOne(32))), 1), 1),
                BVOne(32)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # bv_one - bv_one == bv_zero
            Example(expr=Equals(BVSub(BVOne(32), BVOne(32)), BVZero(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # Rotations
            Example(expr=Equals(BVRor(BVRol(BVOne(32), 1), 1), BVOne(32)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # Extensions
            Example(expr=Equals(BVZExt(BVZero(5), 11), BVSExt(BVZero(1), 15)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 - bv16 = 0_16
            Example(expr=Equals(BVSub(bv16, bv16), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (bv16 - bv16)[0:7] = bv8
            Example(expr=Equals(BVExtract(BVSub(bv16, bv16), 0, 7), bv8),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (bv16[0,7] comp bv8) = bv1
            Example(expr=Equals(BVComp(BVExtract(bv16, 0, 7), bv8), BVOne(1)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (bv16 comp bv16) = bv0
            Example(expr=Equals(BVComp(bv16, bv16), BVZero(1)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # (bv16 s< bv16)
            Example(expr=BVSLT(bv16, bv16),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # (bv16 s< 0_16)
            Example(expr=BVSLT(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (bv16 u< bv16)
            Example(expr=BVULT(bv16, bv16),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # (bv16 s< 0_16)
            Example(expr=BVULT(bv16, BVZero(16)),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # (bv16 | 0_16) = bv16
            Example(expr=Equals(BVOr(bv16, BVZero(16)), bv16),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # (bv16 & 0_16) = 0_16
            Example(expr=Equals(BVAnd(bv16, BVZero(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # 0_16 s< bv16 & ((bv16 s/ -1) s< 0)
            Example(expr=And(BVSLT(BVZero(16), bv16),
                             BVSLT(BVSDiv(bv16, SBV(-1, 16)), BVZero(16))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # 0_16 s< bv16 & ((bv16 s% -1) s< 0)
            Example(expr=And(BVSLT(BVZero(16), bv16),
                             BVSLT(BVSRem(bv16, BVOne(16)), BVZero(16))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_BV),

            # bv16 u% 1 = 0_16
            Example(expr=Equals(BVURem(bv16, BVOne(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 s% 1 = 0_16
            Example(expr=Equals(BVSRem(bv16, BVOne(16)), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 s% -1 = 0_16
            Example(expr=Equals(BVSRem(bv16, BVNeg(BVOne(16))), BVZero(16)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # bv16 a>> 0 = bv16
            Example(expr=Equals(BVAShr(bv16, BVZero(16)), bv16),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            # 0 s<= bv16 & bv16 a>> 1 = bv16 >> 1
            Example(expr=And(
                BVSLE(BVZero(16), bv16),
                Equals(BVAShr(bv16, BVOne(16)), BVLShr(bv16, BVOne(16)))),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BV),

            #
            # Quantification
            #

            # forall y . x -> y
            Example(expr=ForAll([y], Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.BOOL),

            # forall p,q . p + q = 0
            Example(expr=ForAll([p, q], Equals(Plus(p, q), Int(0))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LIA),

            # forall r,s . ((r > 0) & (s > 0)) -> (r - s < r)
            Example(expr=ForAll([r, s],
                                Implies(And(GT(r, Real(0)), GT(s, Real(0))),
                                        (LT(Minus(r, s), r)))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.LRA),

            # exists x,y . x -> y
            Example(expr=Exists([x, y], Implies(x, y)),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.BOOL),

            # exists p,q . p + q = 0
            Example(expr=Exists([p, q], Equals(Plus(p, q), Int(0))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.LIA),

            # exists r . forall s .  (r - s > r)
            Example(expr=Exists([r], ForAll([s], GT(Minus(r, s), r))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LRA),

            # forall r . exists s .  (r - s > r)
            Example(expr=ForAll([r], Exists([s], GT(Minus(r, s), r))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.LRA),

            # x /\ forall r. (r + s = 5)
            Example(expr=And(x, ForAll([r], Equals(Plus(r, s), Real(5)))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.LRA),

            #
            # UFLIRA
            #

            # ih(r,q) > p /\ (x -> y)
            Example(expr=And(GT(Function(ih, (r, q)), p), Implies(x, y)),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLIRA),

            # ( (p - 3) = q ) -> ( ih(r, q + 3) > p \/ ih(r, p) <= p )
            Example(expr=Implies(
                Equals(Minus(p, Int(3)), q),
                Or(GT(Function(ih, (r, Plus(q, Int(3)))), p),
                   LE(Function(ih, (r, p)), p))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLIRA),

            # ( (ToReal(p - 3) = r) /\ (ToReal(q) = r) ) ->
            #     ( ( ih(ToReal(p - 3), q + 3) > p ) \/ (ih(r, p) <= p) )
            Example(expr=Implies(
                And(Equals(ToReal(Minus(p, Int(3))), r), Equals(ToReal(q), r)),
                Or(
                    GT(
                        Function(ih,
                                 (ToReal(Minus(p, Int(3))), Plus(q, Int(3)))),
                        p), LE(Function(ih, (r, p)), p))),
                    is_valid=True,
                    is_sat=True,
                    logic=pysmt.logics.QF_UFLIRA),

            # ! ( (ToReal(p - 3) = r /\ ToReal(q) = r) ->
            #        ( ih(ToReal(p - 3), q + 3) > p  \/
            #          ih(r,p) <= p ) )
            Example(expr=Not(
                Implies(
                    And(Equals(ToReal(Minus(p, Int(3))), r),
                        Equals(ToReal(q), r)),
                    Or(
                        GT(
                            Function(
                                ih,
                                (ToReal(Minus(p, Int(3))), Plus(q, Int(3)))),
                            p), LE(Function(ih, (r, p)), p)))),
                    is_valid=False,
                    is_sat=False,
                    logic=pysmt.logics.QF_UFLIRA),

            # Test complex names
            Example(expr=And(
                Symbol("Did you know that any string works? #yolo"),
                Symbol("10"), Symbol("|#somesolverskeepthe||"), Symbol(" ")),
                    is_valid=False,
                    is_sat=True,
                    logic=pysmt.logics.QF_BOOL),
        ]
        return result
示例#11
0
文件: btor2.py 项目: leonardt/CoSA
    def parse_string(self, strinput):

        hts = HTS()
        ts = TS()

        nodemap = {}
        node_covered = set([])

        translist = []
        initlist = []
        invarlist = []

        invar_props = []
        ltl_props = []

        def getnode(nid):
            node_covered.add(nid)
            if int(nid) < 0:
                return Ite(BV2B(nodemap[str(-int(nid))]), BV(0,1), BV(1,1))
            return nodemap[nid]

        def binary_op(bvop, bop, left, right):
            if (get_type(left) == BOOL) and (get_type(right) == BOOL):
                return bop(left, right)
            return bvop(B2BV(left), B2BV(right))

        def unary_op(bvop, bop, left):
            if (get_type(left) == BOOL):
                return bop(left)
            return bvop(left)

        for line in strinput.split(NL):
            linetok = line.split()
            if len(linetok) == 0:
                continue
            if linetok[0] == COM:
                continue

            (nid, ntype, *nids) = linetok

            if ntype == SORT:
                (stype, *attr) = nids
                if stype == BITVEC:
                    nodemap[nid] = BVType(int(attr[0]))
                    node_covered.add(nid)
                if stype == ARRAY:
                    nodemap[nid] = ArrayType(getnode(attr[0]), getnode(attr[1]))
                    node_covered.add(nid)

            if ntype == WRITE:
                nodemap[nid] = Store(*[getnode(n) for n in nids[1:4]])

            if ntype == READ:
                nodemap[nid] = Select(getnode(nids[1]), getnode(nids[2]))

            if ntype == ZERO:
                nodemap[nid] = BV(0, getnode(nids[0]).width)

            if ntype == ONE:
                nodemap[nid] = BV(1, getnode(nids[0]).width)

            if ntype == ONES:
                width = getnode(nids[0]).width
                nodemap[nid] = BV((2**width)-1, width)

            if ntype == REDOR:
                width = get_type(getnode(nids[1])).width
                zeros = BV(0, width)
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), zeros))

            if ntype == REDAND:
                width = get_type(getnode(nids[1])).width
                ones = BV((2**width)-1, width)
                nodemap[nid] = BVComp(getnode(nids[1]), ones)

            if ntype == CONSTD:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(int(nids[1]), width)

            if ntype == CONST:
                width = getnode(nids[0]).width
                nodemap[nid] = BV(bin_to_dec(nids[1]), width)

            if ntype == STATE:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_state_var(nodemap[nid])

            if ntype == INPUT:
                if len(nids) > 1:
                    nodemap[nid] = Symbol(nids[1], getnode(nids[0]))
                else:
                    nodemap[nid] = Symbol((SN%nid), getnode(nids[0]))
                ts.add_input_var(nodemap[nid])

            if ntype == OUTPUT:
                if len(nids) > 2:
                    symbol = Symbol(nids[2], getnode(nids[0]))
                else:
                    symbol = Symbol((SN%nid), getnode(nids[0]))

                nodemap[nid] = EqualsOrIff(symbol, B2BV(getnode(nids[1])))
                invarlist.append(nodemap[nid])
                node_covered.add(nid)
                ts.add_output_var(symbol)

            if ntype == AND:
                nodemap[nid] = binary_op(BVAnd, And, getnode(nids[1]), getnode(nids[2]))

            if ntype == CONCAT:
                nodemap[nid] = BVConcat(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == XOR:
                nodemap[nid] = binary_op(BVXor, Xor, getnode(nids[1]), getnode(nids[2]))

            if ntype == NAND:
                bvop = lambda x,y: BVNot(BVAnd(x, y))
                bop = lambda x,y: Not(And(x, y))
                nodemap[nid] = binary_op(bvop, bop, getnode(nids[1]), getnode(nids[2]))

            if ntype == IMPLIES:
                nodemap[nid] = BVOr(BVNot(getnode(nids[1])), getnode(nids[2]))

            if ntype == NOT:
                nodemap[nid] = unary_op(BVNot, Not, getnode(nids[1]))

            if ntype == UEXT:
                nodemap[nid] = BVZExt(B2BV(getnode(nids[1])), int(nids[2]))

            if ntype == OR:
                nodemap[nid] = binary_op(BVOr, Or, getnode(nids[1]), getnode(nids[2]))

            if ntype == ADD:
                nodemap[nid] = BVAdd(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SUB:
                nodemap[nid] = BVSub(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGT:
                nodemap[nid] = BVUGT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == UGTE:
                nodemap[nid] = BVUGE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULT:
                nodemap[nid] = BVULT(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == ULTE:
                nodemap[nid] = BVULE(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == EQ:
                nodemap[nid] = BVComp(getnode(nids[1]), getnode(nids[2]))

            if ntype == NE:
                nodemap[nid] = BVNot(BVComp(getnode(nids[1]), getnode(nids[2])))

            if ntype == MUL:
                nodemap[nid] = BVMul(B2BV(getnode(nids[1])), B2BV(getnode(nids[2])))

            if ntype == SLICE:
                nodemap[nid] = BVExtract(B2BV(getnode(nids[1])), int(nids[3]), int(nids[2]))

            if ntype == SLL:
                nodemap[nid] = BVLShl(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRA:
                nodemap[nid] = BVAShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == SRL:
                nodemap[nid] = BVLShr(getnode(nids[1]), getnode(nids[2]))

            if ntype == ITE:
                if (get_type(getnode(nids[2])) == BOOL) or (get_type(getnode(nids[3])) == BOOL):
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])), BV2B(getnode(nids[3])))
                else:
                    nodemap[nid] = Ite(BV2B(getnode(nids[1])), getnode(nids[2]), getnode(nids[3]))

            if ntype == NEXT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(TS.get_prime(getnode(nids[1]))), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(TS.get_prime(getnode(nids[1])), getnode(nids[2]))
                translist.append(getnode(nid))

            if ntype == INIT:
                if (get_type(getnode(nids[1])) == BOOL) or (get_type(getnode(nids[2])) == BOOL):
                    nodemap[nid] = EqualsOrIff(BV2B(getnode(nids[1])), BV2B(getnode(nids[2])))
                else:
                    nodemap[nid] = EqualsOrIff(getnode(nids[1]), getnode(nids[2]))
                initlist.append(getnode(nid))

            if ntype == CONSTRAINT:
                nodemap[nid] = BV2B(getnode(nids[0]))
                invarlist.append(getnode(nid))

            if ntype == BAD:
                nodemap[nid] = getnode(nids[0])
                invar_props.append(Not(BV2B(getnode(nid))))

            if nid not in nodemap:
                Logger.error("Unknown node type \"%s\""%ntype)

        if Logger.level(1):
            name = lambda x: str(nodemap[x]) if nodemap[x].is_symbol() else x
            uncovered = [name(x) for x in nodemap if x not in node_covered]
            uncovered.sort()
            if len(uncovered) > 0:
                Logger.warning("Unlinked nodes \"%s\""%",".join(uncovered))

        if not self.symbolic_init:
            init = simplify(And(initlist))
        else:
            init = TRUE()
        trans = simplify(And(translist))
        invar = simplify(And(invarlist))

        ts.set_behavior(init, trans, invar)
        hts.add_ts(ts)

        return (hts, invar_props, ltl_props)
示例#12
0
 def __get_reverse_encoding(self, bvin):
     ret = BVExtract(bvin, 0, 0)
     for i in range(bvin.symbol_type().width - 1):
         ret = BVConcat(ret, BVExtract(bvin, i + 1, i + 1))
     return ret
示例#13
0
    def parse_file(self, strfile, config, flags=None):
        self.config = config
        self.__reset_structures()

        Logger.msg("Reading CoreIR system... ", 1)
        top_module = self.context.load_from_file(strfile)

        if config.run_passes:
            self.run_passes()

        Modules.abstract_clock = self.config.abstract_clock
        Modules.symbolic_init = self.config.symbolic_init

        top_def = top_module.definition
        interface = list(top_module.type.items())
        modules = {}
        sym_map = {}

        not_defined_mods = []

        hts = HTS(top_module.name)
        invar_props = []
        ltl_props = []

        Logger.msg("Starting encoding... ", 1)

        count = 0

        def extract_value(x, modname, inst_intr, inst_conf, inst_mod):
            if x in inst_intr:
                return self.BVVar(modname + x, inst_intr[x].size)

            if x in inst_conf:
                xval = inst_conf[x].value
                if type(xval) == bool:
                    xval = 1 if xval else 0
                else:
                    if type(xval) != int:
                        try:
                            if xval.is_x():
                                xval = None
                            else:
                                xval = xval.as_uint()
                        except:
                            try:
                                xval = xval.val
                            except:
                                xval = xval.unsigned_value
                return xval

            if inst_mod.generated:
                inst_args = inst_mod.generator_args
                if x in inst_args:
                    return inst_args[x].value

            return None

        if Logger.level(1):
            timer = Logger.start_timer("IntConvertion", False)
            en_tprinting = False

        if Logger.level(2):
            ttimer = Logger.start_timer("Convertion", False)

        if self.config.deterministic:
            td_instances = top_def.instances
            top_def_instances = [(inst.selectpath, inst.config, inst.module)
                                 for inst in td_instances]
            top_def_instances.sort()
        else:
            top_def_instances = list(top_def.instances)

        totalinst = len(top_def_instances)

        for inst in top_def_instances:
            if Logger.level(1):
                count += 1
                if count % 300 == 0:
                    dtime = Logger.get_timer(timer, False)
                    if dtime > 2:
                        en_tprinting = True
                    if en_tprinting:
                        Logger.inline(
                            "%s" % status_bar(
                                (float(count) / float(totalinst))), 1)
                        timer = Logger.start_timer("IntConvertion", False)

                    if Logger.level(2):
                        Logger.get_timer(timer, False)

            ts = None

            if self.config.deterministic:
                (inst_name, inst_conf, inst_mod) = inst
            else:
                inst_name = inst.selectpath
                inst_conf = inst.config
                inst_mod = inst.module

            inst_type = inst_mod.name
            inst_intr = dict(inst_mod.type.items())
            modname = (SEP.join(inst_name)) + SEP

            values_dic = {}

            for x in self.attrnames:
                values_dic[x] = extract_value(x, modname, inst_intr, inst_conf,
                                              inst_mod)

            def args(ports_list):
                return [values_dic[x] for x in ports_list]

            sym = self.__mod_to_sym(inst_type, args)
            if sym is not None:
                sym_map[sym[0].symbol_name()] = (sym[0], sym[1])
                continue

            ts = self.__mod_to_impl(inst_type, args)

            if ts is not None:

                if flags is not None:
                    if CoreIRModelFlags.NO_INIT in flags:
                        ts.init = TRUE()

                    if CoreIRModelFlags.FC_LEMMAS in flags:
                        for v in ts.vars:
                            v_name = v.symbol_name()
                            if (CR in v_name) or (RCR in v_name):
                                cons_v_name = v_name[:len(
                                    CR)] if CR in v_name else v_name[:len(RCR)]
                                cons_v = Symbol(cons_v_name, v.symbol_type())
                                lemma = EqualsOrIff(
                                    cons_v,
                                    BV(values_dic[self.VALUE],
                                       cons_v.symbol_type().width))
                                hts.add_lemma(lemma)

                        for v in ts.state_vars:
                            lemma = EqualsOrIff(
                                v,
                                BV(values_dic[self.INIT],
                                   v.symbol_type().width))
                            hts.add_lemma(lemma)

                hts.add_ts(ts)
            else:
                if inst_type not in not_defined_mods:
                    intface = ", ".join([
                        "%s" % (v) for v in values_dic
                        if values_dic[v] is not None
                    ])
                    Logger.error(
                        "Module type \"%s\" with interface \"%s\" is not defined"
                        % (inst_type, intface))
                    not_defined_mods.append(inst_type)

        Logger.clear_inline(1)

        if self.config.deterministic:
            interface.sort()

        for var in interface:
            varname = SELF + SEP + var[0]
            bvvar = self.BVVar(varname, var[1].size)
            if (var[1].is_input()):
                hts.add_input_var(bvvar)
            else:
                hts.add_output_var(bvvar)

            # Adding clock behavior
            if (self.CLK in var[0].lower()) and (var[1].is_input()):
                self.clock_list.add(bvvar)
                if self.config.abstract_clock:
                    self.abstract_clock_list.add(
                        (bvvar, (BV(0, var[1].size), BV(1, var[1].size))))

        varmap = dict([(s.symbol_name(), s) for s in hts.vars])

        def split_paths(path):
            ret = []
            for el in path:
                ret += el.split(CSEP)

            return ret

        def dict_select(dic, el):
            return dic[el] if el in dic else None

        eq_conns = []
        eq_vars = set([])

        if self.config.deterministic:
            td_connections = top_def.connections
            top_def_connections = [
                ((conn.first.selectpath, conn.second.selectpath)
                 if conn.first.selectpath < conn.second.selectpath else
                 (conn.second.selectpath, conn.first.selectpath), conn)
                for conn in td_connections
            ]
            top_def_connections.sort()
        else:
            top_def_connections = list(top_def.connections)

        for conn in top_def_connections:

            if self.config.deterministic:
                first_selectpath = split_paths(conn[0][0])
                second_selectpath = split_paths(conn[0][1])
            else:
                first_selectpath = split_paths(conn.first.selectpath)
                second_selectpath = split_paths(conn.second.selectpath)

            first = SEP.join(first_selectpath)
            second = SEP.join(second_selectpath)

            firstvar = None
            secondvar = None

            if is_number(first_selectpath[-1]):
                firstname = SEP.join(first_selectpath[:-1])
            else:
                firstname = SEP.join(first_selectpath)

            if is_number(second_selectpath[-1]):
                secondname = SEP.join(second_selectpath[:-1])
            else:
                secondname = SEP.join(second_selectpath)

            first = (dict_select(varmap, self.remap_or2an(firstname)), None)
            second = (dict_select(varmap, self.remap_or2an(secondname)), None)

            firstvar = first[0]
            secondvar = second[0]

            if (firstvar is None) and (self.remap_or2an(firstname) in sym_map):
                firstvar = sym_map[self.remap_or2an(firstname)][1]

            if (secondvar is None) and (self.remap_or2an(secondname)
                                        in sym_map):
                secondvar = sym_map[self.remap_or2an(secondname)][1]

            if (firstvar is None) and (secondvar is not None):
                Logger.error("Symbol \"%s\" is not defined" % firstname)
                first = (Symbol(self.remap_or2an(firstname),
                                secondvar.symbol_type()), None)
            else:
                if firstvar.is_constant():
                    sel = int(first_selectpath[-1]) if (is_number(
                        first_selectpath[-1])) else None
                    first = (firstvar, sel)
                else:
                    if (is_number(first_selectpath[-1])) and (
                            firstvar.symbol_type() !=
                            BOOL) and (firstvar.symbol_type().width > 1):
                        sel = int(first_selectpath[-1])
                        first = (firstvar, sel)

            if (firstvar is not None) and (secondvar is None):
                Logger.error("Symbol \"%s\" is not defined" % secondname)
                second = (Symbol(self.remap_or2an(secondname),
                                 firstvar.symbol_type()), None)
            else:
                if secondvar.is_constant():
                    sel = int(second_selectpath[-1]) if (is_number(
                        second_selectpath[-1])) else None
                    second = (secondvar, sel)
                else:
                    if (is_number(second_selectpath[-1])) and (
                            secondvar.symbol_type() !=
                            BOOL) and (secondvar.symbol_type().width > 1):
                        sel = int(second_selectpath[-1])
                        second = (secondvar, sel)

            assert ((firstvar is not None) and (secondvar is not None))

            eq_conns.append((first, second))

            if firstvar.is_symbol():
                eq_vars.add(firstvar)
            if secondvar.is_symbol():
                eq_vars.add(secondvar)

        conns_len = len(eq_conns)

        if self.pack_connections:
            eq_conns = self.__pack_connections(eq_conns)

        if len(eq_conns) < conns_len:
            Logger.log("Packed %d connections" % (conns_len - len(eq_conns)),
                       1)

        eq_formula = TRUE()

        for eq_conn in eq_conns:

            (fst, snd) = eq_conn

            if fst[1] is None:
                first = fst[0]
            else:
                if len(fst) > 2:
                    first = BVExtract(fst[0], fst[1], fst[2])
                else:
                    first = BVExtract(fst[0], fst[1], fst[1])

            if snd[1] is None:
                second = snd[0]
            else:
                if len(snd) > 2:
                    second = BVExtract(snd[0], snd[1], snd[2])
                else:
                    second = BVExtract(snd[0], snd[1], snd[1])

            if (first.get_type() != BOOL) and (second.get_type() == BOOL):
                second = Ite(second, BV(1, 1), BV(0, 1))

            if (first.get_type() == BOOL) and (second.get_type() != BOOL):
                first = Ite(first, BV(1, 1), BV(0, 1))

            eq_formula = And(eq_formula, EqualsOrIff(first, second))

            Logger.log(str(EqualsOrIff(first, second)), 3)

        ts = TS("Connections")
        ts.invar = eq_formula
        ts.vars = eq_vars

        hts.add_ts(ts)

        if self.enc_map is not None:
            del (self.enc_map)

        if Logger.level(2):
            Logger.get_timer(ttimer)

        return (hts, invar_props, ltl_props)
示例#14
0
    def parse_file(self, file_path, config, flags=None):
        # coreir needs a string representing the path
        strfile = str(file_path)

        self.config = config
        self.__reset_structures()

        Logger.msg("Reading CoreIR system... ", 1)
        top_module = self.context.load_from_file(strfile)

        if config.run_coreir_passes:
            self.run_passes()

        Modules.abstract_clock = self.config.abstract_clock
        Modules.symbolic_init = self.config.symbolic_init

        top_def = top_module.definition
        interface = list(top_module.type.items())
        modules = {}
        sym_map = {}

        not_defined_mods = []

        hts = HTS(top_module.name)
        invar_props = []
        ltl_props = []

        Logger.msg("Starting encoding... ", 1)

        count = 0

        def extract_value(x, modname, inst_intr, inst_conf, inst_mod):
            if x in inst_intr:
                return self.BVVar(modname + x, inst_intr[x].size)

            if x in inst_conf:
                xval = inst_conf[x].value
                if type(xval) == bool:
                    xval = 1 if xval else 0
                else:
                    if type(xval) != int:
                        try:
                            xval = xval.as_uint()
                        except:
                            xval = None
                return xval

            if inst_mod.generated:
                inst_args = inst_mod.generator_args
                if x in inst_args:
                    return inst_args[x].value

            return None

        if Logger.level(1):
            timer = Logger.start_timer("IntConvertion", False)
            en_tprinting = False

        if Logger.level(2):
            ttimer = Logger.start_timer("Convertion", False)

        td_instances = top_def.instances
        top_def_instances = [(inst.selectpath, inst.config, inst.module)
                             for inst in td_instances]
        # sorting keeps the behavior deterministic
        top_def_instances.sort()

        totalinst = len(top_def_instances)

        for inst in top_def_instances:
            if Logger.level(1):
                count += 1
                if count % 300 == 0:
                    dtime = Logger.get_timer(timer, False)
                    if dtime > 2:
                        en_tprinting = True
                    if en_tprinting:
                        Logger.inline(
                            "%s" % status_bar(
                                (float(count) / float(totalinst))), 1)
                        timer = Logger.start_timer("IntConvertion", False)

                    if Logger.level(2):
                        Logger.get_timer(timer, False)

            ts = None

            (inst_name, inst_conf, inst_mod) = inst
            inst_type = inst_mod.name
            inst_intr = dict(inst_mod.type.items())
            modname = (SEP.join(inst_name)) + SEP

            values_dic = {}

            for x in self.attrnames:
                values_dic[x] = extract_value(x, modname, inst_intr, inst_conf,
                                              inst_mod)

            def args(ports_list):
                return [values_dic[x] for x in ports_list]

            sym = self.__mod_to_sym(inst_type, args)
            if sym is not None:
                sym_map[sym[0].symbol_name()] = (sym[0], sym[1])
                continue

            ts = self.__mod_to_impl(inst_type, args)

            if ts is not None:

                if flags is not None:
                    if CoreIRModelFlags.NO_INIT in flags:
                        ts.init = TRUE()

                    if CoreIRModelFlags.FC_LEMMAS in flags:
                        for v in ts.vars:
                            v_name = v.symbol_name()
                            if (CR in v_name) or (RCR in v_name):
                                cons_v_name = v_name[:len(
                                    CR)] if CR in v_name else v_name[:len(RCR)]
                                cons_v = Symbol(cons_v_name, v.symbol_type())
                                lemma = EqualsOrIff(
                                    cons_v,
                                    BV(values_dic[self.VALUE],
                                       cons_v.symbol_type().width))
                                hts.add_lemma(lemma)

                        for v in ts.state_vars:
                            lemma = EqualsOrIff(
                                v,
                                BV(values_dic[self.INIT],
                                   v.symbol_type().width))
                            hts.add_lemma(lemma)

                hts.add_ts(ts)
            else:
                if inst_type not in not_defined_mods:
                    intface = ", ".join([
                        "%s" % (v) for v in values_dic
                        if values_dic[v] is not None
                    ])
                    Logger.error(
                        "Module type \"%s\" with interface \"%s\" is not defined"
                        % (inst_type, intface))
                    not_defined_mods.append(inst_type)

        Logger.clear_inline(1)

        # sorting keeps the behavior deterministic
        interface.sort()

        for var in interface:
            varname = SELF + SEP + var[0]
            bvvar = self.BVVar(varname, var[1].size)
            if (var[1].is_input()):
                hts.add_input_var(bvvar)
            else:
                hts.add_output_var(bvvar)

            if var[1].kind == NAMED and var[1].name == COREIR_CLK:
                self.clock_list.add(bvvar)
                if self.config.abstract_clock:
                    self.abstract_clock_list.add(
                        (bvvar, (BV(0, var[1].size), BV(1, var[1].size))))
                else:
                    # add state variable that stores the previous clock value
                    # This is IMPORTANT for model checking soundness, but
                    #    it isn't obvious that this is necessary
                    #
                    # imagine we have an explicit clock encoding (not abstract_clock), e.g.
                    #   next(state_var) = (!clk & next(clk)) ? <state_update> : <old value>
                    # and if we're trying to prove something using k-induction, there's a "loop free"
                    #   constraint that the state and output variables don't repeat (reach the same
                    #   state twice) in the trace
                    #   but on a negedge clock, there can be scenarios where no state or outputs
                    #   can be updated and we'll get a trivial unsat which will be interpreted as
                    #   a converged proof -- uh oh
                    #
                    # adding this state element just ensures that the loop free constraint won't
                    #   be violated trivially
                    # e.g. on a neg-edge clock, this new state element will have changed

                    # make it hidden (won't be printed)
                    # HIDDEN_VAR is a prefix that printers check for
                    trailing_clock_var = self.BVVar(
                        "{}{}__prev".format(HIDDEN_VAR, varname), var[1].size)

                    ts = TS()
                    ts.add_state_var(trailing_clock_var)
                    # the initial state for this trailing variable is unconstrained
                    ts.set_behavior(
                        TRUE(),
                        EqualsOrIff(TS.get_prime(trailing_clock_var), bvvar),
                        TRUE())

                    hts.add_ts(ts)

        varmap = dict([(s.symbol_name(), s) for s in hts.vars])

        def split_paths(path):
            ret = []
            for el in path:
                ret += el.split(CSEP)

            return ret

        def dict_select(dic, el):
            return dic[el] if el in dic else None

        eq_conns = []
        eq_vars = set([])

        td_connections = top_def.connections
        top_def_connections = [
            ((conn.first.selectpath, conn.second.selectpath)
             if conn.first.selectpath < conn.second.selectpath else
             (conn.second.selectpath, conn.first.selectpath), conn)
            for conn in td_connections
        ]
        # sorting keeps the behavior deterministic
        top_def_connections.sort()

        for conn in top_def_connections:

            first_selectpath = split_paths(conn[0][0])
            second_selectpath = split_paths(conn[0][1])

            first = SEP.join(first_selectpath)
            second = SEP.join(second_selectpath)

            firstvar = None
            secondvar = None

            if is_number(first_selectpath[-1]):
                firstname = SEP.join(first_selectpath[:-1])
            else:
                firstname = SEP.join(first_selectpath)

            if is_number(second_selectpath[-1]):
                secondname = SEP.join(second_selectpath[:-1])
            else:
                secondname = SEP.join(second_selectpath)

            first = (dict_select(varmap, self.remap_or2an(firstname)), None)
            second = (dict_select(varmap, self.remap_or2an(secondname)), None)

            firstvar = first[0]
            secondvar = second[0]

            if (firstvar is None) and (self.remap_or2an(firstname) in sym_map):
                firstvar = sym_map[self.remap_or2an(firstname)][1]

            if (secondvar is None) and (self.remap_or2an(secondname)
                                        in sym_map):
                secondvar = sym_map[self.remap_or2an(secondname)][1]

            if (firstvar is None) and (secondvar is not None):
                Logger.error("Symbol \"%s\" is not defined" % firstname)
                first = (Symbol(self.remap_or2an(firstname),
                                secondvar.symbol_type()), None)
            else:
                if firstvar.is_constant():
                    sel = int(first_selectpath[-1]) if (is_number(
                        first_selectpath[-1])) else None
                    first = (firstvar, sel)
                else:
                    if (is_number(first_selectpath[-1])) and (
                            firstvar.symbol_type() !=
                            BOOL) and (firstvar.symbol_type().width > 1):
                        sel = int(first_selectpath[-1])
                        first = (firstvar, sel)

            if (firstvar is not None) and (secondvar is None):
                Logger.error("Symbol \"%s\" is not defined" % secondname)
                second = (Symbol(self.remap_or2an(secondname),
                                 firstvar.symbol_type()), None)
            else:
                if secondvar.is_constant():
                    sel = int(second_selectpath[-1]) if (is_number(
                        second_selectpath[-1])) else None
                    second = (secondvar, sel)
                else:
                    if (is_number(second_selectpath[-1])) and (
                            secondvar.symbol_type() !=
                            BOOL) and (secondvar.symbol_type().width > 1):
                        sel = int(second_selectpath[-1])
                        second = (secondvar, sel)

            assert ((firstvar is not None) and (secondvar is not None))

            eq_conns.append((first, second))

            if firstvar.is_symbol():
                eq_vars.add(firstvar)
            if secondvar.is_symbol():
                eq_vars.add(secondvar)

        conns_len = len(eq_conns)

        if self.pack_connections:
            eq_conns = self.__pack_connections(eq_conns)

        if len(eq_conns) < conns_len:
            Logger.log("Packed %d connections" % (conns_len - len(eq_conns)),
                       1)

        eq_formula = TRUE()

        for eq_conn in eq_conns:

            (fst, snd) = eq_conn

            if fst[1] is None:
                first = fst[0]
            else:
                if len(fst) > 2:
                    first = BVExtract(fst[0], fst[1], fst[2])
                else:
                    first = BVExtract(fst[0], fst[1], fst[1])

            if snd[1] is None:
                second = snd[0]
            else:
                if len(snd) > 2:
                    second = BVExtract(snd[0], snd[1], snd[2])
                else:
                    second = BVExtract(snd[0], snd[1], snd[1])

            if (first.get_type() != BOOL) and (second.get_type() == BOOL):
                second = Ite(second, BV(1, 1), BV(0, 1))

            if (first.get_type() == BOOL) and (second.get_type() != BOOL):
                first = Ite(first, BV(1, 1), BV(0, 1))

            eq_formula = And(eq_formula, EqualsOrIff(first, second))

            Logger.log(str(EqualsOrIff(first, second)), 3)

        ts = TS("Connections")
        ts.invar = eq_formula
        ts.vars = eq_vars

        hts.add_ts(ts)

        if self.enc_map is not None:
            del (self.enc_map)

        if Logger.level(2):
            Logger.get_timer(ttimer)

        # check that clocks were detected if there's any state
        if hts.state_vars:
            assert self.clock_list, "Expecting clocks if there are state variables"

        return (hts, invar_props, ltl_props)
示例#15
0
 def exec_Skip(self, instr: Skip, st):
     bit = BVExtract(st.R[instr.reg], instr.bit, instr.bit)
     taken = Equals(bit, BitVecVal(int(instr.bit_is_one), 1))
     return st, (taken, BVAdd(st.PC, BitVecVal(2, 16)))