def session(request):
s = Session(add_all=False)
s, _ = _add_device(s)
yield s
# force session destruction
s._close()
def session(request):
"""Default session adding all attached devices."""
s = Session()
yield s
# force session destruction
s._close()
def test_read_initial_data():
"""Verify data values of HI-Z samples on initial attach.
See https://github.com/analogdevicesinc/m1k-fw/issues/9 for details.
"""
sys.stdout.write('\n')
prompt(
'unplug the device, ground the metal USB connector, and plug it back in'
)
# create our own session to avoid detach exceptions
session = Session(add_all=False)
session, device = _add_device(session)
samples = device.get_samples(100)
assert len(samples) == 100
# verify all samples are near 0
tests = []
for sample in samples:
for x in chain.from_iterable(sample):
tests.append(abs(round(x)) == 0)
# old firmware versions exhibit bad data, newer versions should fix the issue
if float(device.fwver) <= 2.10:
assert not all(tests)
else:
assert all(tests)
# request a bunch of extra samples to flush bad values
device.get_samples(10000)
# force session destruction
session._close()
def test_read_continuous_dataflow_raises():
"""Verify workflows that lead to data flow issues."""
# create a session that doesn't ignore data flow issues
session = Session(add_all=False, ignore_dataflow=False)
session.scan()
session.add(session.available_devices[0])
device = session.devices[0]
session.start(0)
time.sleep(.5)
with pytest.raises(SampleDrop):
device.read(1000)
# force session destruction
session._close()
def session(request):
s = Session(add_all=False)
if s.scan() == 0:
# no devices plugged in
raise ValueError
s.add(s.available_devices[0])
yield s
# force session destruction
s._close()
def __init__(self):
#start session
self.session = Session()
#define sample rate
self.sample_rate=100000
#define streaming sample size
self.sample_size=1
#get device
try:
self.device=self.session.devices[0]
except IndexError:
print("No Device Found")
sys.exit(1)
#initialize default mode to HI_Z
self.device.channels['A'].mode=Mode.HI_Z
self.device.channels['B'].mode=Mode.HI_Z
#streaming parameters
self._streaming=False
self._lock=threading.RLock()
#mode
self.mode_dict={'HI_Z': Mode.HI_Z,'SVMI': Mode.SVMI,'SIMV':Mode.SIMV}
self.port_dict={'PIO_0': 28,'PIO_1': 29,'PIO_2': 47,'PIO_3': 3}
self.read_samples=RRN.NewStructure("edu.rpi.robotics.m1k.read_samples")
#wave dict
self.wavedict = {
('A','sine'): self.device.channels['A'].sine,
('A','triangle'): self.device.channels['A'].triangle,
('A','sawtooth'): self.device.channels['A'].sawtooth,
('A','stairstep'): self.device.channels['A'].stairstep,
('A','square'): self.device.channels['A'].square,
('B','sine'): self.device.channels['B'].sine,
('B','triangle'): self.device.channels['B'].triangle,
('B','sawtooth'): self.device.channels['B'].sawtooth,
('B','stairstep'): self.device.channels['B'].stairstep,
('B','square'): self.device.channels['B'].square
}
# avoid crashing flag
self.need_streaming=False
samples_raw = dev.read(NUM_SAM_PTS, timeout=-1, skipsamples=True)
for x in samples_raw:
samples[0].append(x[0][0])
samples[1].append(x[1][0])
return (samples)
def data_gen(): # Must be iterator, therefor yield and While-loop
#print('data_gen() ausgeführt.')
while True:
samples = get_samples()
yield samples
try:
session = Session()
if session.devices:
print('ADALM1000 gefunden...')
dev = session.devices[0]
# Set both channels to high impedance mode.
chan_a = dev.channels['A']
chan_a.mode = Mode.HI_Z
chan_b = dev.channels['B']
chan_b.mode = Mode.SVMI
#chan_b.sine(0, 5, WAVEFORM_SAMPLES, -(WAVEFORM_SAMPLES / 4))
chan_b.square(0, 5, WAVEFORM_SAMPLES, -(WAVEFORM_SAMPLES / 4), 0.5)
# Start a continuous session.
session.start(0)
x = np.arange(0, num_dsp_pts, 1)
fig, ax = plt.subplots()
line_a, = ax.plot(x,
def refill_data(num_samples, v=None):
if v is None:
# fill channels with a static, random integer between 0 and 5
v = random.randint(0, 5)
return [v] * num_samples
# fill channels with a static, random float between -0.2 and 0.2
#return [random.uniform(-0.2,0.2)] * num_samples
if __name__ == '__main__':
# don't throw KeyboardInterrupt on Ctrl-C
signal(SIGINT, SIG_DFL)
session = Session()
if session.devices:
# Grab the first device from the session.
dev = session.devices[0]
# Ignore read buffer sample drops when printing to stdout.
dev.ignore_dataflow = sys.stdout.isatty()
# Set both channels to source voltage, measure current mode.
chan_a = dev.channels['A']
chan_b = dev.channels['B']
chan_a.mode = Mode.SVMI
chan_b.mode = Mode.SVMI
#chan_a.mode = Mode.SIMV
#chan_b.mode = Mode.SIMV
def session():
s = Session(add_all=False)
yield s
# force session destruction
s._close()
def set_channel_a_mode(received_mode, setpoint):
"""Set channel A mode."""
if received_mode == Mode.SVMI:
CHAN_A.mode = Mode.SVMI
CHAN_A.write([setpoint], -1)
elif received_mode == Mode.SIMV:
CHAN_A.mode = Mode.SIMV
CHAN_A.write([setpoint], -1)
else:
CHAN_A.mode = Mode.HI_Z
if __name__ == "__main__":
SESSION = Session()
VALID_SETPOINT = 0.0
print 'Wait for device to be detected...'
while not SESSION.devices:
SESSION = Session()
print 'Device detected...'
if SESSION.devices:
# Grab the first device from the session.
DEV = SESSION.devices[0]
# Set both channels to source voltage, measure current mode.
CHAN_A = DEV.channels['A']
CHAN_B = DEV.channels['B']
CHAN_A.mode = Mode.HI_Z
def session(request):
s = Session()
yield s
# force session destruction
s._close()
FIRST_STAGE = False
SECOND_STAGE = True
THIRD_STAGE = False
FOURTH_STAGE = False
# Stop script execution until user press ENTER
BRAKE_SCRIPT = False
USB = LED(12)
if __name__ == '__main__':
USB.off()
sleep(2)
USB.on()
sleep(2)
global_.session = Session()
# print 'Wait for device to be detected...', \
# TEXT['orange'], inspect.stack()[0][1], TEXT['default']
print TEXT['turquoise'], inspect.stack()[0][1], TEXT['default']
while not global_.session.devices:
global_.session = Session()
sleep(1)
# print 'Device detected... Continue calibration...'
BOARD_NUMBER = len(global_.session.devices)
if VIEW_DEBUG_MESSAGES:
print 'Number of detected boards:', BOARD_NUMBER
if global_.session.devices:
while ORDER_INDEX <= BOARD_NUMBER:
7.6.2020, S Mack
"""
import time
from pysmu import Session
# assign digital pins
PIO_0 = 28
PIO_1 = 29
PIO_2 = 47
PIO_3 = 3
try:
session = Session(ignore_dataflow=True, queue_size=10000)
if session.devices:
dev = session.devices[0]
while True:
# get state of PIO0
state = dev.ctrl_transfer(0xc0, 0x91, PIO_3, 0, 0, 1, 100)
# funktioniert nicht...
#for ch in state:
# print(ch)
print(list(state))
time.sleep(1)
else:
print('no devices attached')
except KeyboardInterrupt:
print()
def session(request):
session = Session(add_all=False)
session.scan()
return session
#!/usr/bin/env python
#
# Simple script showing how custom functions can be executed during hotplug
# events, use Ctrl-C to exit.
from __future__ import print_function
from signal import signal, SIG_DFL, SIGINT
import time
from pysmu import Session
session = Session()
last_devices = session.available_devices
while True:
time.sleep(2)
session.scan()
available_devices = session.available_devices
for other_device in last_devices:
found = False
for device in available_devices:
if other_device.serial == device.serial:
found = True
break
if not found:
print("Device detached!")
#!/usr/bin/env python
#
# Simple script showing how to get a set number of samples from all devices
# connected to a system.
from __future__ import print_function
import sys
from pysmu import Session, Mode
if __name__ == '__main__':
session = Session()
if not session.devices:
sys.exit(1)
for idx, dev in enumerate(session.devices):
# Set all devices in the session to use source voltage, measure current
# mode for channel A with a constant value based on their index.
dev.channels['A'].mode = Mode.SVMI
dev.channels['A'].constant(idx % 6)
# Set all devices in the session to use source current, measure voltage
# mode for channel B with a constant value of 0.05.
dev.channels['B'].mode = Mode.SIMV
dev.channels['B'].constant(0.05)
# Run the session for at least 10 captured samples in noncontinuous mode.
for dev_idx, samples in enumerate(session.get_samples(1000)):
print('dev: {}'.format(dev_idx))
'Frequenz Start/Stopp: {}/{} Hz, Sin-Min: {} mA, Sin-Max: {} mA\n\n'.
format(START_FREQ, STOP_FREQ, AWGB_IVAL_MIN, AWGB_IVAL_MAX))
meas_file.write(
't [s]; f [Hz]; U_DC [V]; I_DC [mA]; U_AC [V]; I_AC [mA]; R_Diff [Ohm]; C [mAh] \n\n'
)
# 2. Thread starten
th.Thread(target=key_capture_thread,
args=(),
name='key_capture_thread',
daemon=True).start()
print('Zum Beenden Return drücken...')
print()
session = Session(ignore_dataflow=True,
sample_rate=SAMP_RATE,
queue_size=NUM_SAMPLES)
if session.devices:
dev = session.devices[0]
DevID = dev.serial
print("Device ID:" + str(DevID))
FWRev = float(dev.fwver)
HWRev = str(dev.hwver)
print('Firmware Revision: {}, Hardware Revision: {}'.format(FWRev, HWRev))
print()
if FWRev < 2.17:
print("WARNUNG: Firmware version > 2.16 noetig!")
session.flush()
CHA = dev.channels['A'] # Open CHA
CHA.mode = Mode.HI_Z_SPLIT # Put CHA in Hi Z split mode
from signal import signal, SIG_DFL, SIGINT
import time
from pysmu import Session
def attached(dev):
"""Run when a device is plugged in."""
print('device attached: {}'.format(dev))
def detached(dev):
"""Run when a device is unplugged."""
print('device detached: {}'.format(dev))
if __name__ == '__main__':
# don't throw KeyboardInterrupt on Ctrl-C
signal(SIGINT, SIG_DFL)
session = Session()
# Register the functions above to get triggered during physical attach or
# detach events. Multiple functions can be registered for either trigger if
# required.
session.hotplug_attach(attached)
session.hotplug_detach(detached)
print('waiting for hotplug events...')
while True:
time.sleep(1)
#!/usr/bin/env python
#
# Simple script showing how to perform a non-continuous, multi-run session
# while changing cyclic buffer values.
from __future__ import print_function
import sys
from pysmu import Session, Mode
if __name__ == '__main__':
session = Session()
if not session.devices:
sys.exit(1)
for dev in session.devices:
dev.channels['A'].mode = Mode.SVMI
dev.channels['B'].mode = Mode.SIMV
for x in range(21):
# Write 1000 samples of incrementing voltage and current values to
# channel A and B, respectively, for every device in the session.
v = x * (5 / 20.0)
i = ((x * (4 / 20.0)) / 10.0) - 0.2
data = (([v] * 1000, [i] * 1000) for dev in session.devices)
session.write(data, cyclic=True)
for dev, samples in enumerate(session.get_samples(10)):
print('dev: {}: chan A voltage: {}, chan B current: {}'.format(
#!/usr/bin/env python
#
# Simple script showing how to write a sine/cosine wave to the attached devices and
# plot the resulting voltage output for both channels using matplotlib.
from __future__ import print_function
from collections import defaultdict
import sys
from pysmu import Session, Mode
import matplotlib.pyplot as plt
if __name__ == '__main__':
session = Session()
if not session.devices:
sys.exit(1)
waveform_samples = 500
for i, dev in enumerate(session.devices):
# Output a sine wave for channel A voltage.
dev.channels['A'].mode = Mode.SVMI
dev.channels['A'].sine(0, 5, waveform_samples, -(waveform_samples / 4))
# Output a cosine wave for channel B voltage.
dev.channels['B'].mode = Mode.SVMI
dev.channels['B'].sine(0, 5, waveform_samples, 0)
chan_a = defaultdict(list)
chan_b = defaultdict(list)
#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""
ADALM1000
Beide ADCs auslesen
https://analogdevicesinc.github.io/libsmu/classsmu_1_1Signal.html
6.6.2020, S Mack
"""
import time
from pysmu import Session, Mode
try:
session = Session()
if session.devices:
dev = session.devices[0]
# Set both channels to high impedance mode.
chan_a = dev.channels['A']
chan_b = dev.channels['B']
chan_a.mode = Mode.HI_Z
chan_b.mode = Mode.HI_Z
while True:
samples = dev.get_samples(1000)
for x in samples:
print("{: 6f} {: 6f} {: 6f} {: 6f}".format(x[0][0], x[0][1], x[1][0], x[1][1]))
time.sleep(1)
else:
print('no devices attached')
self.line_a.set_data(self.x_vals[:(self.n_d_pts - disp_start)],
vals_a[disp_start:])
self.line_b.set_data(self.x_vals[:(self.n_d_pts - disp_start)],
vals_b[disp_start:])
else:
self.line_a.set_ydata(vals_a) # plot new values
self.line_b.set_ydata(vals_b) # plot new values
def yield_samples(self): # Must be iterator and separate method
while True:
samples = self.get_samples()
yield samples
try:
session = Session()
if session.devices:
print('ADALM1000 gefunden...')
fig, ax = plt.subplots()
my_scope = Scope(ax,
session,
H_MAX,
V_RANGE,
n_s_pts=N_S_PTS,
red_rate=RED_RATE,
mode_a='Hi_Z',
mode_b='Hi_Z',
trig=TRIG)
ani = animation.FuncAnimation(fig,
func=my_scope.show_samples,
frames=my_scope.yield_samples,
