def twist(val, geo):
for i in range(nTwist):
geo.rot_z['wing'].coef[i] = val[i]
def span(val, geo):
# Span
C = geo.extractCoef('wing')
s = geo.extractS('wing')
for i in range(len(C)-1):
C[-1, 2] = C[-1, 2] + val[0]
geo.restoreCoef(C, 'wing')
DVGeo.addGeoDVGlobal('twist', [0]*nTwist, twist, lower=-10, upper=10, scale=1.0)
DVGeo.addGeoDVGlobal('span', [0], span, lower=-10, upper=10, scale=1.0)
DVGeo.addGeoDVLocal('shape', lower=-0.5, upper=0.5, axis='y', scale=10.0)
mesh = MBMesh(options={'gridFile':'../inputFiles/mdo_tutorial_euler.cgns'})
CFDSolver.setMesh(mesh)
CFDSolver.setDVGeo(DVGeo)
#Aeroproblem must be set before we can call DVGeo.setDesignVars
CFDSolver.setAeroProblem(ap)
if not 'complex' in sys.argv:
# Solve system
CFDSolver(ap, writeSolution=False)
funcs = {}
CFDSolver.evalFunctions(ap, funcs)
# Solve sensitivities
funcsSens = {}
CFDSolver.evalFunctionsSens(ap, funcsSens)
# Write values and derivatives out:
if MPI.COMM_WORLD.rank == 0:
# Adjoint Parameters
'adjointL2Convergence': 1e-6,
'adjointMaxIter': 2000,
}
meshOptions = {
'gridFile': gridFile,
'warpType': 'algebraic',
}
# Create solver
CFDSolver = ADFLOW(options=aeroOptions, comm=comm)
# Set up mesh warping
mesh = MBMesh(options=meshOptions, comm=comm)
CFDSolver.setMesh(mesh)
CFDSolver.setDVGeo(DVGeo)
# ==============================================================================
# Set up structural analysis
# ==============================================================================
structOptions = {
'gravityVector': [0, -9.81, 0],
'projectVector': [0, 1, 0], # normal to planform
}
# Set up TACS on the struct proc
FEASolver = pytacs.pyTACS('wingbox.bdf', comm=comm, options=structOptions)
FEASolver.setDVGeo(DVGeo)
execfile('INPUT/setup_structure.py')
# Solution Parameters
'nSolutionSteps': 5, # only for nonLinear or steppedLinear
'ksp_its': 25,
'warp_tol': 1e-10, # overall tolerance for nonLinear/steppedLinear
'reduction_factor_for_reform': 0.5,
'useSolutionMonitor': False,
'useKSPMonitor': False,
# Physical parameters
'nu': 0.0,
'e_exp': 1.0,
'skew_exp': 0.0,
'useRotationCorrection': False,
}
mesh = MBMesh(options=optMesh)
options.update({
'gridfile': '../inputFiles/naca0012_rans-L2.cgns',
'writevolumesolution': False,
'vis4': .025,
'vis2': 0.5,
'restrictionrelaxation': .5,
'smoother': 'dadi',
'equationtype': 'RANS',
'equationmode': 'unsteady',
'timeIntegrationscheme': 'bdf',
'ntimestepsfine': nfineSteps,
'deltat': dt,
'nsubiterturb': 10,
'nsubiter': 5,
# Solution Parameters
'nSolutionSteps': 5, # only for nonLinear or steppedLinear
'ksp_its': 25,
'warp_tol': 1e-10, # overall tolerance for nonLinear/steppedLinear
'reduction_factor_for_reform': 0.5,
'useSolutionMonitor': False,
'useKSPMonitor': False,
# Physical parameters
'nu': 0.0,
'e_exp': 1.0,
'skew_exp': 0.0,
'useRotationCorrection': False,
}
# Create mesh object
mesh0 = MBMesh(options=meshOptions)
mesh_vec = []
for i in xrange(ntimeintervalsspectral):
mesh_vec.append(MBMesh(options=meshOptions))
# ======================================================================
# CFD INPUTS
# ======================================================================
MGCycle = '2w'
name = 'aero_struct'
aeroOptions = {
# Common Parameters
'gridFile': gridFile,
'outputDirectory': 'OUTPUT',
def test6():
# ****************************************************************************
printHeader('MDO tutorial RANS Geometric Variables')
# ****************************************************************************
aeroOptions = copy.deepcopy(defOpts)
# Now set the options that need to be overwritten for this example:
aeroOptions.update(
{'gridfile': '../inputFiles/mdo_tutorial_rans.cgns',
'mgcycle':'2w',
'equationtype':'RANS',
'smoother':'dadi',
'nsubiterturb':3,
'nsubiter':3,
'cfl':1.5,
'cflcoarse':1.25,
'ncyclescoarse':250,
'ncycles':750,
'monitorvariables':['resrho','resturb','cl','cd','cmz','yplus','totalr'],
'usenksolver':True,
'l2convergence':1e-17,
'l2convergencecoarse':1e-2,
'nkswitchtol':1e-4,
'adjointl2convergence': 1e-16,
'nkls': 'non monotone',
'frozenturbulence':False,
'nkjacobianlag':2,
}
)
# Setup aeroproblem, cfdsolver
ap = AeroProblem(name='mdo_tutorial', alpha=1.8, mach=0.80,
altitude=10000.0, areaRef=45.5, chordRef=3.25, evalFuncs=['cl','cmz','drag'])
ap.addDV('alpha')
ap.addDV('mach')
CFDSolver = ADFLOW(options=aeroOptions)
if 'complex' in sys.argv:
DVGeo = DVGeometry('../inputFiles/mdo_tutorial_ffd.fmt', complex=True)
else:
DVGeo = DVGeometry('../inputFiles/mdo_tutorial_ffd.fmt', complex=False)
nTwist = 2
DVGeo.addRefAxis('wing', pyspline.Curve(x=numpy.linspace(5.0/4.0, 1.5/4.0+7.5, nTwist),
y=numpy.zeros(nTwist),
z=numpy.linspace(0,14, nTwist), k=2))
def twist(val, geo):
for i in xrange(nTwist):
geo.rot_z['wing'].coef[i] = val[i]
def span(val, geo):
# Span
C = geo.extractCoef('wing')
s = geo.extractS('wing')
for i in xrange(len(C)-1):
C[-1, 2] = C[-1, 2] + val[0]
geo.restoreCoef(C, 'wing')
DVGeo.addGeoDVGlobal('twist', [0]*nTwist, twist, lower=-10, upper=10, scale=1.0)
DVGeo.addGeoDVGlobal('span', [0], span, lower=-10, upper=10, scale=1.0)
DVGeo.addGeoDVLocal('shape', lower=-0.5, upper=0.5, axis='y', scale=10.0)
mesh = MBMesh(options={'gridFile':'../inputFiles/mdo_tutorial_rans.cgns'})
CFDSolver.setMesh(mesh)
CFDSolver.setDVGeo(DVGeo)
#Aeroproblem must be set before we can call DVGeo.setDesignVars
CFDSolver.setAeroProblem(ap)
if not 'complex' in sys.argv:
# Solve system
CFDSolver(ap, writeSolution=False)
funcs = {}
CFDSolver.evalFunctions(ap, funcs)
# Solve sensitivities
funcsSens = {}
CFDSolver.evalFunctionsSens(ap, funcsSens)
# Write values and derivatives out:
if MPI.COMM_WORLD.rank == 0:
for key in ['cl','cmz','drag']:
print 'funcs[%s]:'%key
reg_write(funcs['mdo_tutorial_%s'%key],1e-10,1e-10)
# Now write the derivatives in the same order the CS will do them:
print ('Twist[0] Derivatives:')
reg_write(funcsSens['mdo_tutorial_cl']['twist'][0][0], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_cmz']['twist'][0][0], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_drag']['twist'][0][0], 1e-10,1e-10)
print ('Span Derivatives:')
reg_write(funcsSens['mdo_tutorial_cl']['span'][0], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_cmz']['span'][0], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_drag']['span'][0], 1e-10,1e-10)
print ('shape[13] Derivatives:')
reg_write(funcsSens['mdo_tutorial_cl']['shape'][0][13], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_cmz']['shape'][0][13], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_drag']['shape'][0][13], 1e-10,1e-10)
print ('mach Derivatives:')
reg_write(funcsSens['mdo_tutorial_cl']['mach_mdo_tutorial'], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_cmz']['mach_mdo_tutorial'], 1e-10,1e-10)
reg_write(funcsSens['mdo_tutorial_drag']['mach_mdo_tutorial'], 1e-10,1e-10)
else:
# For the complex....we just do successive perturbation
for ii in range(4):
xRef = {'twist':[0.0, 0.0], 'span':[0.0], 'shape':numpy.zeros(72, dtype='D'), 'mach_mdo_tutorial':0.8}
if ii == 0:
xRef['twist'][0] += h*1j
elif ii == 1:
xRef['span'][0] += h*1j
elif ii == 2:
xRef['shape'][13] += h*1j
else:
xRef['mach_mdo_tutorial']+=h*1j
ap.setDesignVars(xRef)
CFDSolver.resetFlow(ap)
DVGeo.setDesignVars(xRef)
CFDSolver(ap, writeSolution=False)
funcs = {}
CFDSolver.evalFunctions(ap, funcs)
if MPI.COMM_WORLD.rank == 0:
if ii == 0:
for key in ['cl','cmz','drag']:
print 'funcs[%s]:'%key
reg_write(numpy.real(funcs['mdo_tutorial_%s'%key]),1e-10,1e-10)
if ii == 0:
print ('Twist[0] Derivatives:')
elif ii == 1:
print ('Span Derivatives:')
elif ii == 2:
print ('shape[13] Derivatives:')
elif ii == 3:
print ('mach Derivatives:')
for key in ['cl','cmz','drag']:
deriv = numpy.imag(funcs['mdo_tutorial_%s'%key])/h
reg_write(deriv,1e-10,1e-10)
del CFDSolver
del mesh
