def test_loop_writing_2D(self):
# pass
station = Station()
MockPar = MockParabola(name='Loop_writing_test_2D')
station.add_component(MockPar)
loop = Loop(MockPar.x[-100:100:20]).loop(MockPar.y[-50:50:10]).each(
MockPar.skewed_parabola)
data1 = loop.run(name='MockLoop_hdf5_test', formatter=self.formatter)
data2 = DataSet(location=data1.location, formatter=self.formatter)
data2.read()
for key in data2.arrays.keys():
self.checkArraysEqual(data2.arrays[key], data1.arrays[key])
metadata_equal, err_msg = compare_dictionaries(data1.metadata,
data2.metadata,
'original_metadata',
'loaded_metadata')
self.assertTrue(metadata_equal, msg='\n' + err_msg)
self.formatter.close_file(data1)
self.formatter.close_file(data2)
def test_reading_into_existing_data_array(self):
data = DataSet1D(location=self.loc_provider, name='test_read_existing')
# closing before file is written should not raise error
self.formatter.write(data)
data2 = DataSet(location=data.location, formatter=self.formatter)
d_array = DataArray(
name='dummy',
array_id='x_set', # existing array id in data
label='bla',
unit='a.u.',
is_setpoint=False,
set_arrays=(),
preset_data=np.zeros(5))
data2.add_array(d_array)
# test if d_array refers to same as array x_set in dataset
self.assertTrue(d_array is data2.arrays['x_set'])
data2.read()
# test if reading did not overwrite dataarray
self.assertTrue(d_array is data2.arrays['x_set'])
# Testing if data was correctly updated into dataset
self.checkArraysEqual(data2.arrays['x_set'], data.arrays['x_set'])
self.checkArraysEqual(data2.arrays['y'], data.arrays['y'])
self.formatter.close_file(data)
self.formatter.close_file(data2)
def _slice_dataset(dataset: DataSet,
slice_objects: Sequence[slice],
output_parameter_name: Optional[str],
copy_metadata: bool,
verbose: int = 0):
""" Slice the measurement array of a dataset and adjust the setpoints arrays accordingly """
zarray = dataset.default_parameter_array()
if output_parameter_name is None:
output_parameter_name = zarray.name
set_arrays = zarray.set_arrays
yarray = set_arrays[0]
scan_dimension = dataset_dimension(dataset)
is_1d_dataset = scan_dimension == 1
is_2d_dataset = scan_dimension == 2
if verbose:
print(
f'slice_dataset: dimension {scan_dimension} slice_objects {slice_objects}'
)
if is_1d_dataset:
signal_window = zarray[tuple(slice_objects)]
dataset_window = qtt.data.makeDataSet1Dplain(
yarray.name,
yarray[slice_objects[0]],
yname=output_parameter_name,
y=signal_window,
xunit=yarray.unit,
yunit=zarray.unit)
elif is_2d_dataset:
xarray = set_arrays[1]
signal_window = zarray[tuple(slice_objects)]
dataset_window = qtt.data.makeDataSet2Dplain(
xarray.name,
xarray[0][slice_objects[1]],
yarray.name,
yarray[slice_objects[0]],
zname=output_parameter_name,
z=signal_window,
xunit=xarray.unit,
yunit=yarray.unit,
zunit=zarray.unit)
else:
raise NotImplementedError(
'slicing a multi-dimensional dataset of dimension {scan_dimension} is not supported'
)
if copy_metadata:
dataset_window.metadata = copy.deepcopy(dataset.metadata)
return dataset_window
def average_probability(data_set, location, NewIO, formatter, qubit_num=1):
for parameter in data_set.arrays:
if len(data_set.arrays[parameter].ndarray.shape
) == 2 and parameter.endswith('set'):
data_set_new = DataSet(location=location +
'_average_probability_data_' + parameter,
io=NewIO,
formatter=formatter)
for parameter in data_set.arrays:
if len(data_set.arrays[parameter].ndarray.shape) == 2:
data = deepcopy(data_set.arrays[parameter].ndarray)
data = np.average(data, axis=0)
is_setpoint = data_set.arrays[parameter].is_setpoint
name = data_set.arrays[parameter].name
array_id = data_set.arrays[parameter].array_id
data_set_new.add_array(
DataArray(preset_data=data,
name=name,
array_id=array_id,
is_setpoint=is_setpoint))
return data_set_new
def test_xarray_example_conversion(self):
times = pd.date_range("2000-01-01", "2000-1-31", name="time")
shape = (31, 3)
xarray_dataset = xr.Dataset(
{"tmin": (("time", "location"), np.random.rand(*shape)),
"tmax": (("time", "location"), np.random.rand(*shape)),
}, {"time": times, "location": ["IA", "IN", "IL"]},)
qd = DataSet.from_xarray(xarray_dataset)
xarray_dataset2 = qd.to_xarray()
self.assertEqual(qd.default_parameter_array().shape, xarray_dataset.tmin.shape)
self.assertEqual(list(xarray_dataset.coords.keys()), list(xarray_dataset2.coords.keys()))
self.assertEqual(list(xarray_dataset.data_vars.keys()), list(xarray_dataset2.data_vars.keys()))
self.assertEqual(xarray_dataset.tmin.shape, xarray_dataset2.tmin.shape)
def slice_dataset(dataset: DataSet, window: Sequence[float], axis: int = 0,
verbose: int = 0, copy_metadata: bool = False, output_parameter_name=None) -> DataSet:
""" Given a dataset and a window for the horizontal axis return the dataset with selected window
Args:
dataset: Dataset to be slice
window: Specification of the window to be selected
axis: Axis used for slicing
verbose: Verbosity level
copy_metadata: If True then copy the metadata of the input dataset
output_parameter_name: Name of the output array
Returns:
Dataset with sliced data
"""
zarray = dataset.default_parameter_array()
if output_parameter_name is None:
output_parameter_name = zarray.name
set_arrays = zarray.set_arrays
yarray = set_arrays[0]
scan_dimension = dataset_dimension(dataset)
is_1d_dataset = scan_dimension == 1
if is_1d_dataset:
if not axis == 0:
raise AssertionError('for a 1D dataset axis should be 0')
else:
xarray = set_arrays[1]
slice_objects = [slice(0, size) for jj, size in enumerate(zarray.shape)]
if axis == 0:
slice_array = yarray
start_idx = int(np.floor(np.interp(window[0], slice_array.ndarray, np.arange(slice_array.ndarray.size))))
end_idx = int(np.interp(window[1], slice_array.ndarray, np.arange(slice_array.ndarray.size)))
slice_objects[0] = slice(start_idx, end_idx)
else:
slice_array = xarray
start_idx = int(np.floor(np.interp(window[0], slice_array.ndarray[0], np.arange(slice_array.ndarray[0].size))))
end_idx = int(np.interp(window[1], slice_array.ndarray[0], np.arange(slice_array.ndarray[0].size)))
slice_objects[1] = slice(start_idx, end_idx)
return _slice_dataset(dataset, tuple(slice_objects), output_parameter_name, copy_metadata=copy_metadata, verbose=0)
def convert_to_probability(
data_set,
location,
NewIO,
formatter,
threshold,
qubit_num=1,
repetition=100,
):
for parameter in data_set.arrays:
if len(data_set.arrays[parameter].ndarray.shape
) == 2 and parameter.endswith('set'):
data_set_new = DataSet(location=location +
'_average_probability_' + parameter,
io=NewIO,
formatter=formatter)
# data_set = convert_to_01_state(data_set, threshold, qubit_num, repetition, name, unit, sweep_array)
qubit_data_array = []
set_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter].ndarray
dimension_1 = data_array.shape[0]
arrayid = data_set.arrays[parameter].array_id
if parameter.endswith(
'set'): ## or data_set.arrays[parameter].is_setpoint
set_array.append(
DataArray(preset_data=data_array,
name=parameter,
array_id=arrayid,
is_setpoint=True))
elif not parameter.endswith('set'):
dimension_2 = data_array.shape[1]
probability_data = np.ndarray(shape=(dimension_1, dimension_2))
for k in range(dimension_1):
for l in range(dimension_2):
probability_data[k][l] = np.average(data_array[k][l])
qubit_data_array.append(
DataArray(preset_data=probability_data,
name=parameter,
array_id=arrayid,
is_setpoint=False))
for array in set_array:
data_set_new.add_array(array)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
return data_set_new
def seperate_data(data_set,
location,
NewIO,
formatter,
qubit_num=1,
repetition=100,
sweep_arrays=None,
sweep_names=None):
#this function will seperate the raw data for each experiment (appended to the same seqeunce)
#into different data files. This will make plotting and data handling easier.
start = 0
end = 0
seperated_data = []
for count, array in enumerate(sweep_arrays):
end = start + len(sweep_arrays[count]) - 1
seperated_data.append(
DataSet(location=location + '_' + sweep_names[count] + '_set',
io=NewIO,
formatter=formatter))
for parameter in data_set.arrays:
if parameter.endswith(
'set') and data_set.arrays[parameter].ndarray.ndim > 1:
name = sweep_names[count] + '_set'
else:
name = parameter
if data_set.arrays[parameter].ndarray.ndim > 1:
seperated_data[count].add_array(
DataArray(
preset_data=data_set.arrays[parameter][:, start:end],
name=name,
array_id=name,
is_setpoint=True))
else:
seperated_data[count].add_array(
DataArray(preset_data=data_set.arrays[parameter],
name=name,
array_id=name,
is_setpoint=True))
start = end + 1
return seperated_data
def analyse_RTS(dataset: DataSet, fig: int = 1) -> dict:
time = default_setpoint_array(dataset)
rtsdata = np.array(dataset.default_parameter_array())
num_bins = 40
counts, bins = np.histogram(rtsdata, bins=num_bins)
bincentres = np.array([(bins[i] + bins[i + 1]) / 2
for i in range(0,
len(bins) - 1)])
par_fit, result_dict = fit_double_gaussian(bincentres, counts)
split = result_dict['split']
plt.figure(fig)
plt.clf()
plt.subplot(1, 2, 1)
plt.plot(time[:10000], rtsdata[:10000], '.', label='signal')
plt.xlabel('Time')
plt.title('Selection of points')
plt.subplot(1, 2, 2)
_plot_rts_histogram(rtsdata, num_bins, par_fit, split, 'Histogram')
return {}
def analyse_polarization_line(dataset: DataSet,
fig: int = 1,
verbose=0) -> dict:
""" Analyse dataset with polarization line """
if verbose:
print('analyse_polarization_line: dataset: %s' % dataset.location)
signal = dataset.default_parameter_array()
delta = default_setpoint_array(dataset, signal.name)
lever_arm = 80
delta_uev = np.array(delta) * lever_arm
signal = qtt.algorithms.generic.smoothImage(signal)
kb = scipy.constants.physical_constants['Boltzmann constant in eV/K'][
0] * 1e6
kT = 75e-3 * kb # effective electron temperature in ueV
par_fit, initial_parameters, results = fit_pol_all(delta_uev, signal, kT)
plot_polarization_fit(delta_uev, signal, results, fig)
return {}
def test_multifile(self):
formatter = GNUPlotFormat()
location = self.locations[1]
data = DataSetCombined(location)
formatter.write(data, data.io, data.location)
filex, filexy = files_combined()
with open(location + '/x_set.dat') as f:
self.assertEqual(f.read(), filex)
with open(location + '/x_set_y_set.dat') as f:
self.assertEqual(f.read(), filexy)
data2 = DataSet(location=location)
formatter.read(data2)
for array_id in ('x_set', 'y1', 'y2', 'y_set', 'z1', 'z2'):
self.checkArraysEqual(data2.arrays[array_id],
data.arrays[array_id])
def resample_dataset(dataset: DataSet, sample_rate: Tuple[int], copy_metadata: bool = False,
output_parameter_name: Optional[str] = None) -> DataSet:
""" Given a dataset resample the measurement array
Args:
dataset: Dataset to be slice
sample_rate: Tuple with for each axis the sample rate. Must be a postive integer
copy_metadata: If True then copy the metadata of the input dataset
output_parameter_name: Name of the output array
Returns:
Dataset with sliced data
"""
zarray = dataset.default_parameter_array()
if output_parameter_name is None:
output_parameter_name = zarray.name
slice_objects = tuple(slice(0, size, sample_rate[jj]) for jj, size in enumerate(zarray.shape))
return _slice_dataset(dataset, slice_objects, output_parameter_name, copy_metadata=copy_metadata, verbose=0)
def test_xarray_conversions(self):
qd = DataSet1D(name="TestNewData_test_xarray_conversions")
xarray_data_set = qcodes_dataset_to_xarray_dataset(qd)
qd_transformed = xarray_dataset_to_qcodes_dataset(xarray_data_set)
m = qd.default_parameter_array()
mt = qd_transformed.default_parameter_array()
for key in ["name", "unit"]:
self.assertEqual(getattr(m, key), getattr(mt, key))
qd2 = DataSet2D(name="TestNewData_test_xarray_conversions")
xarray_data_set = qcodes_dataset_to_xarray_dataset(qd2)
qd2_transformed = xarray_dataset_to_qcodes_dataset(xarray_data_set)
m = qd2.default_parameter_array()
mt = qd2_transformed.default_parameter_array()
for key in ["name", "unit"]:
self.assertEqual(getattr(m, key), getattr(mt, key))
xds = qd.to_xarray()
qds = DataSet.from_xarray(xds)
def average_multirow_dataset(dataset: DataSet,
number_of_repetitions: int,
new_values=None,
parameter_name: str = 'signal',
output_parameter_name: str = 'signal') -> DataSet:
""" Calculate the averaged signal from a 2D dataset with repeated rows
Args:
dataset: Dataset containing the data to be averaged
number_of_repetitions: Number of rows over which to average
new_values: Optional new values for the averaged axis
parameter_name: Name of data array to process
output_parameter_name: Name of output array
Returns:
Averaged dataset
"""
zarray = dataset.default_parameter_array(parameter_name)
set_arrays = zarray.set_arrays
xarray = set_arrays[1]
yarray = set_arrays[0]
if new_values is None:
number_of_blocks = int(zarray.shape[0] / number_of_repetitions)
new_values = np.linspace(yarray[0], yarray[-1], number_of_blocks)
data = zarray
ncolumns = data.shape[1]
averaged_signal = data.transpose().reshape(
-1, number_of_repetitions).mean(1).reshape(ncolumns, -1).transpose()
dataset_averaged = qtt.data.makeDataSet2Dplain(xarray.name,
xarray[0],
yarray.name,
new_values,
zname=output_parameter_name,
z=averaged_signal,
xunit=xarray.unit,
yunit=yarray.unit,
zunit=zarray.unit)
return dataset_averaged
def plot_dataset(dataset: DataSet,
parameter_names: Optional[list] = None,
fig: Optional[int] = 1) -> None:
""" Plot a dataset to matplotlib figure window
Args:
dataset: DataSet to be plotted
parameter_names: List of arrays to be plotted
fig: Specification if Matplotlib figure window
"""
if parameter_names is None:
parameter_names = [dataset.default_parameter_name()]
if parameter_names == 'all':
parameter_names = [
name for name in dataset.arrays.keys()
if not dataset.arrays[name].is_setpoint
]
default_array = dataset.default_parameter_array()
if fig:
plt.figure(fig)
plt.clf()
if len(default_array.shape) >= 2:
if len(parameter_names) > 1:
arrays = [
dataset.default_parameter_array(parameter_name)
for parameter_name in parameter_names
]
plot_handle = MatPlot(*arrays, num=fig)
else:
plot_handle = MatPlot(dataset.default_parameter_array(
parameter_names[0]),
num=fig)
else:
for idx, parameter_name in enumerate(parameter_names):
if idx == 0:
plot_handle = MatPlot(
dataset.default_parameter_array(parameter_name),
num=fig)
else:
plot_handle.add(
dataset.default_parameter_array(parameter_name, ))
def plot_dataset(dataset: DataSet, scanjob, save=True) -> None:
""" Plot a dataset to matplotlib figure window
Args:
dataset: DataSet to be plotted
scanjob: scanjob of the measurement
save: Select if you want to save the plots
"""
parameter_names = [
name for name in dataset.arrays.keys()
if not dataset.arrays[name].is_setpoint
]
default_array = dataset.default_parameter_array()
# Path for saving
base_loc = dataset.default_io.base_location
folder = '\\' + dataset.location + '\\'
label = str(scanjob.get('dataset_label'))
path = base_loc + folder + label
# 2D plots
if len(default_array.shape) >= 2:
for idx, parameter_name in enumerate(parameter_names):
plot_handle = MatPlot(dataset.arrays[parameter_name], num=idx)
plot_handle.rescale_axis()
if save == True:
plt.savefig(path + str(idx) + '.png')
# 1D plots
else:
for idx, parameter_name in enumerate(parameter_names):
plot_handle = MatPlot(dataset.arrays[parameter_name], num=idx)
plot_handle.rescale_axis()
if save == True:
plt.savefig(path + str(idx) + '.png')
def convert_to_01_state(data_set, threshold, qubit_num=1, repetition=100):
#data_set = convert_to_ordered_data(data_set, qubit_num, repetition, name, unit, sweep_array)
qubit_data_array = []
set_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter].ndarray
dimension_1 = data_array.shape[0]
array_id = data_set.arrays[parameter].array_id
if parameter.endswith(
'set'): ## or data_set.arrays[parameter].is_setpoint
set_array.append(
DataArray(preset_data=data_array,
name=parameter,
array_id=array_id,
is_setpoint=True))
elif not parameter.endswith('set'):
dimension_2 = data_array.shape[1]
data = np.ndarray(shape=(dimension_1, dimension_2, repetition))
for k in range(dimension_1):
for l in range(dimension_2):
for j in range(repetition):
data[k][l][j] = 1 if np.min(
data_array[k][l][j * seg_size:(j + 1) *
seg_size]) <= threshold else 0
qubit_data_array.append(
DataArray(preset_data=data,
name=parameter,
array_id=array_id,
is_setpoint=False))
data_set_new = DataSet(location=new_location + '_01_state',
io=NewIO,
formatter=formatter)
for array in set_array:
data_set_new.add_array(array)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
return data_set_new
def majority_vote(data_set,
threshold,
qubit_num=1,
repetition=100,
name='frequency',
unit='GHz',
sweep_array=None,
average=False):
data_set = convert_to_01_state(data_set, threshold, qubit_num, repetition,
name, unit, sweep_array)
set_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter].ndarray
dimension_1 = data_array.shape[0]
arrayid = data_set.arrays[parameter].array_id
if parameter.endswith(
'set'): ## or data_set.arrays[parameter].is_setpoint
set_array.append(
DataArray(preset_data=data_array,
name=parameter,
array_id=arrayid,
is_setpoint=True))
dimension_2 = len(sweep_array) if sweep_array is not None else 2
# dimension_1 = 5
vote_data = np.ndarray(shape=(dimension_1, dimension_2, repetition))
average_vote_data = np.ndarray(shape=(dimension_1, dimension_2))
name = 'vote'
arrayid = 'vote'
for k in range(dimension_1):
for l in range(dimension_2):
for repe in range(repetition):
voter = np.array([
data_set.digitizerqubit_1[k][l][repe],
data_set.digitizerqubit_2[k][l][repe],
data_set.digitizerqubit_3[k][l][repe],
])
vote_data[k][l][repe] = 1 if np.sum(voter) >= 2 else 0
if average:
average_vote_data[k][l] = np.average(vote_data[k][l])
print('average: ', average_vote_data[k][l])
data = vote_data if not average else average_vote_data
vote_data_array = DataArray(preset_data=data,
name=name,
array_id=arrayid,
is_setpoint=False)
data_set_new = DataSet(location=new_location,
io=NewIO,
formatter=formatter)
for array in set_array:
data_set_new.add_array(array)
data_set_new.add_array(vote_data_array)
return data_set_new
def convert_to_01_state(data_set,
threshold,
loop_num,
qubit_num,
name='frequency',
unit='GHz',
sweep_array=None):
data_set = convert_to_ordered_data(data_set, loop_num, qubit_num, name,
unit, sweep_array)
qubit_data_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter]
dimension_1 = data_array.shape[0]
arrayid = data_set.arrays[parameter].array_id
if parameter[
-3:] == 'set': ## or data_set.arrays[parameter].is_setpoint
if len(data_array.shape) == 1:
set_array1 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
elif len(data_array.shape
) == 2 and not parameter.startswith('index'):
set_array2 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
elif parameter[-3:] != 'set':
seg_num = int(data_set.arrays[parameter].shape[1] / seg_size)
data = np.ndarray(shape=(dimension_1, seg_num))
setpara = np.ndarray(shape=(dimension_1, seg_num))
for k in range(dimension_1):
for j in range(seg_num):
setpara[k][j] = j
for i in range(seg_size):
if data_array.ndarray[k][j * seg_size +
i] <= threshold:
data[k][j] = 1
break
if i == seg_size - 1:
data[k][j] = 0
set_array3 = DataArray(preset_data=setpara,
name=name,
array_id=name + '_set',
is_setpoint=True)
qubit_data_array.append(
DataArray(preset_data=data,
name=parameter,
array_id=arrayid,
is_setpoint=False))
data_set_new = DataSet(location=new_location,
io=NewIO,
formatter=formatter)
data_set_new.add_array(set_array1)
data_set_new.add_array(set_array2)
if loop_num > 1:
data_set_new.add_array(set_array3)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
return data_set_new
def convert_to_probability(data_set,
threshold,
loop_num,
qubit_num=1,
name='frequency',
unit='GHz',
sweep_array=None):
data_set = convert_to_01_state(data_set, threshold, loop_num, qubit_num,
name, unit, sweep_array)
qubit_data_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter]
dimension_1 = data_array.shape[0]
arrayid = data_set.arrays[parameter].array_id
if parameter[
-3:] == 'set': ## or data_set.arrays[parameter].is_setpoint
if len(data_array.shape) == 1:
set_array1 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
if len(data_array.shape
) == 2 and not parameter.startswith('index'):
set_array2 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
elif parameter[-3:] != 'set':
seg_num = int(data_set.arrays[parameter].shape[1])
data = np.ndarray(shape=(dimension_1, loop_num))
setpara = np.ndarray(shape=(dimension_1, loop_num))
for k in range(dimension_1):
# data_k = []
# setpara_k = []
state = np.ndarray(shape=(loop_num, int(seg_num / loop_num)))
for i in range(seg_num):
loop = i % loop_num
sweep = i // loop_num
state[loop][sweep] = data_array.ndarray[k][i]
for j in range(loop_num):
setpara[k][j] = j
probability = np.average(state[j])
data[k][j] = probability
if loop_num > 1 and sweep_array is not None:
setpara[k] = sweep_array
set_array3 = DataArray(preset_data=setpara,
name=name,
array_id=name + '_set',
is_setpoint=True)
# if loop_num == 1:
# data = data.T[0]
qubit_data_array.append(
DataArray(preset_data=data,
name=parameter,
array_id=arrayid,
is_setpoint=False))
data_set_new = DataSet(location=new_location,
io=NewIO,
formatter=formatter)
data_set_new.add_array(set_array1)
data_set_new.add_array(set_array2)
if loop_num > 1:
data_set_new.add_array(set_array3)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
return data_set_new
def convert_to_ordered_data(data_set,
qubit_num=1,
repetition=100,
name='frequency',
unit='GHz',
sweep_array=None):
qubit_data_array = []
set_array = []
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter].ndarray
dimension_1 = data_array.shape[0]
array_name = parameter
array_id = data_set.arrays[parameter].array_id
if parameter.endswith('set'):
if data_array.ndim == 2 and parameter.startswith('index'):
dimension_2 = int(data_array.shape[-1] / 2 / (repetition + 1) /
seg_size / qubit_num)
sweep_array = sweep_array if sweep_array is not None else np.linspace(
0, dimension_2 - 1, dimension_2)
data_array = np.array(
[sweep_array for k in range(dimension_1)])
array_name = name + '_set'
array_id = name + '_set'
if data_array.ndim != 3 or not parameter.startswith('index'):
set_array.append(
DataArray(preset_data=data_array,
name=array_name,
array_id=array_id,
is_setpoint=True))
elif not parameter.endswith('set') and data_array.ndim == 2:
data_num = int(data_array.shape[-1] / 2 / (repetition + 1) *
repetition)
qubit_data_num = int(data_num / qubit_num)
dimension_2 = int(data_array.shape[-1] / 2 / (repetition + 1) /
seg_size / qubit_num)
qubit_data = np.ndarray(shape=(qubit_num, dimension_1, dimension_2,
int(qubit_data_num / dimension_2)))
for k in range(dimension_1):
raw_data = data_array[k][::2]
raw_marker = data_array[k][1::2]
for seg in range(seg_size * qubit_num * dimension_2):
if raw_marker[seg] > 0.2: ## a better threshold ???
break
data = raw_data[seg:data_num + seg]
print('seg', seg)
data_reshape = data.reshape(int(data_num / seg_size), seg_size)
print('data_shape', data_reshape.shape)
for l in range(dimension_2):
for q in range(qubit_num):
qubit_data[q][k][l] = data_reshape[qubit_num * l +
q::dimension_2 *
qubit_num].reshape(
seg_size *
repetition, )
n = 2 if q == 0 else q
if q >= 2:
n = q + 1
qubit_data_array.append(
DataArray(preset_data=qubit_data[q],
name=parameter + 'qubit_%d' % (n),
array_id=array_id + 'qubit_%d' % (n),
is_setpoint=False))
elif not parameter.endswith('set') and data_array.ndim == 3:
data_num = int(data_array.shape[-1] / 2 / (repetition + 1) *
repetition)
qubit_data_num = int(data_num / qubit_num)
dimension_2 = data_array.shape[1]
print('qubit_num, dimension_1, dimension_2, int(qubit_data_num)',
qubit_num, dimension_1, dimension_2, int(qubit_data_num))
qubit_data = np.ndarray(shape=(qubit_num, dimension_1, dimension_2,
int(qubit_data_num)))
for k in range(dimension_1):
for l in range(dimension_2):
raw_data = data_array[k][l][::2]
raw_marker = data_array[k][l][1::2]
for seg in range(seg_size * qubit_num):
if raw_marker[seg] > 0.2: ## a better threshold ???
break
data = raw_data[
seg:data_num +
seg] ## here data consists both data from qubit1 and qubit2
for q in range(qubit_num):
data_reshape = data.reshape(int(data_num / seg_size),
seg_size)
qubit_data[q][k][l] = data_reshape[
q::qubit_num].reshape(seg_size * repetition, )
n = 2 if q == 0 else q
qubit_data_array.append(
DataArray(preset_data=qubit_data[q],
name=parameter + 'qubit_%d' % (n),
array_id=array_id + 'qubit_%d' % (n),
is_setpoint=False))
data_set_new = DataSet(location=new_location + '_ordered_raw_data',
io=NewIO,
formatter=formatter)
for array in set_array:
data_set_new.add_array(array)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
return data_set_new
def _parse_1d_dataset(dataset: DataSet) -> tuple:
y_data = np.array(dataset.default_parameter_array())
x_data = np.array(qtt.data.default_setpoint_array(dataset))
return x_data, y_data
]
arrays4 = [data1, data2, data3]
data_set_2 = new_data(
arrays=arrays3,
location=None,
loc_record={
'name': 'T1',
'label': 'Vread_sweep'
},
io=NewIO,
)
data_set_2.save_metadata()
test_location = '2017-08-18/20-40-19_T1_Vread_sweep'
data_set_3 = DataSet(
location=test_location,
io=NewIO,
)
data_set_3.read()
AWGpara_array = data_set_3.arrays['AWGpara_set'].ndarray
index0_array = data_set_3.arrays['index0_set'].ndarray
digitizer_array = data_set_3.arrays['digitizer_digitizer'].ndarray
#
#print('loop.data_set: %s' % LP.data_set)
#
#data = LP.run()
#
def test_from_server(self, gdm_mock):
mock_dm = MockDataManager()
gdm_mock.return_value = mock_dm
mock_dm.location = 'Mars'
mock_dm.live_data = MockLive()
# wrong location or False location - converts to local
data = DataSet(location='Jupiter',
data_manager=True,
mode=DataMode.PULL_FROM_SERVER)
self.assertEqual(data.mode, DataMode.LOCAL)
data = DataSet(location=False,
data_manager=True,
mode=DataMode.PULL_FROM_SERVER)
self.assertEqual(data.mode, DataMode.LOCAL)
# location matching server - stays in server mode
data = DataSet(location='Mars',
data_manager=True,
mode=DataMode.PULL_FROM_SERVER,
formatter=MockFormatter())
self.assertEqual(data.mode, DataMode.PULL_FROM_SERVER)
self.assertEqual(data.arrays, MockLive.arrays)
# cannot write except in LOCAL mode
with self.assertRaises(RuntimeError):
data.write()
# cannot finalize in PULL_FROM_SERVER mode
with self.assertRaises(RuntimeError):
data.finalize()
# now test when the server says it's not there anymore
mock_dm.location = 'Saturn'
data.sync()
self.assertEqual(data.mode, DataMode.LOCAL)
self.assertEqual(data.has_read_data, True)
# now it's LOCAL so we *can* write.
data.write()
self.assertEqual(data.has_written_data, True)
# location=False: write, read and sync are noops.
data.has_read_data = False
data.has_written_data = False
data.location = False
data.write()
data.read()
data.sync()
self.assertEqual(data.has_read_data, False)
self.assertEqual(data.has_written_data, False)
def dataset_dimension(dataset: DataSet) -> int:
""" Return dimension of DataSet """
return len(dataset.default_parameter_array().set_arrays)
def test_to_server(self, gdm_mock):
mock_dm = MockDataManager()
mock_dm.needs_restart = True
gdm_mock.return_value = mock_dm
data = DataSet(location='Venus',
data_manager=True,
mode=DataMode.PUSH_TO_SERVER)
self.assertEqual(mock_dm.needs_restart, False, data)
self.assertEqual(mock_dm.data_set, data)
self.assertEqual(data.data_manager, mock_dm)
self.assertEqual(data.mode, DataMode.PUSH_TO_SERVER)
# cannot write except in LOCAL mode
with self.assertRaises(RuntimeError):
data.write()
# now do what the DataServer does with this DataSet: init_on_server
# fails until there is an array
with self.assertRaises(RuntimeError):
data.init_on_server()
data.add_array(MockArray())
data.init_on_server()
self.assertEqual(data.noise.ready, True)
# we can only add a given array_id once
with self.assertRaises(ValueError):
data.add_array(MockArray())
def convert_to_ordered_data(data_set,
loop_num,
qubit_num,
name='frequency',
unit='GHz',
sweep_array=None):
# Dimension = '1D'
for parameter in data_set.arrays:
data_array = data_set.arrays[parameter]
dimension_1 = data_array.shape[0]
arrayid = data_set.arrays[parameter].array_id
if parameter.endswith('set'):
if data_array.ndarray.ndim == 1:
set_array1 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
elif data_array.ndarray.ndim == 2 and not parameter.startswith(
'index'):
set_array2 = DataArray(preset_data=data_array.ndarray,
name=parameter,
array_id=arrayid,
is_setpoint=True)
elif not parameter.endswith('set'):
data_num = int(data_set.arrays[parameter].shape[1] / 2 /
(repetition + 1) * repetition)
qubit_data_num = int(data_num / qubit_num)
data = np.ndarray(shape=(dimension_1, data_num))
marker = np.ndarray(shape=(dimension_1, data_num))
setpara = np.ndarray(shape=(dimension_1, qubit_data_num))
qubit_data = np.ndarray(shape=(qubit_num, dimension_1,
qubit_data_num))
qubit_data_array = []
for k in range(dimension_1):
raw_data = data_array[k][::2]
raw_marker = data_array[k][1::2]
for seg in range(seg_size * loop_num):
if raw_marker[seg] > 0.1: ## a better threshold ???
break
data[k] = raw_data[seg:data_num + seg]
marker[k] = raw_marker[seg:data_num + seg]
if sweep_array is None:
setpara[k] = np.linspace(0, data_num - 1, qubit_data_num)
else:
sa = np.vstack(
[np.repeat(sweep_array, int(seg_size), axis=0)] *
repetition)
setpara[k] = sa.reshape(sa.size, )
if qubit_num > 1:
data_reshape = data[k].reshape(int(data_num / seg_size),
seg_size)
for q in range(qubit_num):
qubit_data[q][k] = np.append(
np.array([]), data_reshape[q::qubit_num])
elif qubit_num == 1:
qubit_data[0][k] = data[k]
set_array3 = DataArray(preset_data=setpara,
name=name,
array_id=name + '_set',
is_setpoint=True)
for q in range(qubit_num):
qubit_data_array.append(
DataArray(preset_data=qubit_data[q],
name=parameter + 'qubit_%d' % (q + 1),
array_id=arrayid + 'qubit_%d' % (q + 1),
is_setpoint=False))
data_set_new = DataSet(location=new_location,
io=NewIO,
formatter=formatter)
data_set_new.add_array(set_array1)
data_set_new.add_array(set_array2)
if loop_num != 1:
data_set_new.add_array(set_array3)
for q in range(qubit_num):
data_set_new.add_array(qubit_data_array[q])
# data_set_new.add_array(data_array4)
return data_set_new
def plot_dataset(dataset: DataSet, win: pyplot.PlotWindow = None):
"""
Plot the given dataset.
If a window is given, then the dataset will be appended into the window,
attempting to match the PlotItem to the correct dataset using the title.
If a matching plot is not found, a new plot will be inserted.
Args:
dataset [qcodes.DataSet]: The qcodes dataset to plot.
win Union[pyplot.PlotWindow, None]: The window to plot into, or none if
we should create a new window.
"""
if win is None:
win = pyplot.PlotWindow(title='ID: {}'.format(dataset.run_id))
appending = False
elif isinstance(win, pyplot.PlotWindow):
appending = True
else:
raise TypeError(
f"Unexpected type for win. Expected pyplot.PlotWindow, got {type(win)}."
)
# Plot each dependant dataset in the data
data = dataset.to_pandas_dataframe_dict()
for param in data:
param = dataset.paramspecs[param]
dep_params = [dataset.paramspecs[p] for p in param._depends_on]
if len(dep_params) == 1:
plot = None
if appending:
plot = find_plot_by_paramspec(win, dep_params[0], param)
plot.plot_title += f" (id: {dataset.run_id})"
if not plot.left_axis.checkParamspec(param):
raise ValueError(
f"Left axis label/units incompatible. "
f"Got: {param}, expecting: {plot.left_axis.label}, {plot.left_axis.units}."
)
if not plot.bot_axis.checkParamspec(dep_params[0]):
raise ValueError(
f"Bottom axis label/units incompatible. "
f"Got: {dep_params[0]}, expecting: {plot.bot_axis.label}, {plot.bot_axis.units}."
)
if plot is None:
plot = win.addPlot()
plot.plot_title = (
f"{dep_params[0].name} ({dep_params[0].label}) "
f"v.<br>{param.name} ({param.label}) "
f"(id: {dataset.run_id})")
c_data = data[param.name]
if c_data.isna().all(axis=None):
# No data in plot
continue
add_line_plot(plot, c_data, x=dep_params[0], y=param)
elif len(dep_params) == 2:
plot = None
if appending:
plot = find_plot_by_paramspec(win, dep_params[0],
dep_params[1])
plot.plot_title += f" (id: {dataset.run_id})"
if not plot.left_axis.checkParamspec(dep_params[1]):
raise ValueError(
f"Left axis label/units incompatible. "
f"Got: {dep_params[1]}, expecting: {plot.left_axis.label}, {plot.left_axis.units}."
)
if not plot.bot_axis.checkParamspec(dep_params[0]):
raise ValueError(
f"Bottom axis label/units incompatible. "
f"Got: {dep_params[0]}, expecting: {plot.bot_axis.label}, {plot.bot_axis.units}."
)
histogram = plot.items[0].histogram
if not histogram.axis.checkParamspec(param):
raise ValueError(
f"Color axis label/units incompatible. "
f"Got: {param}, expecting: {histogram.axis.label}, {histogram.axis.units}."
)
if plot is None:
plot = win.addPlot()
plot.plot_title = (
f"{dep_params[0].name} ({dep_params[0].label}) "
f"v.<br>{dep_params[1].name} ({dep_params[1].label}) "
f"(id: {dataset.run_id})")
c_data = data[param.name].unstack().droplevel(0, axis=1)
if c_data.isna().all(axis=None):
# No data in plot
continue
add_image_plot(plot,
c_data,
x=dep_params[0],
y=dep_params[1],
z=param)
else:
raise ValueError(
"Invalid number of dimensions in dataset. Can only plot 1D or 2D traces."
)
return win
