def set_input(trace, inbufs):
inbufs = set(inbufs)
for i, te in trace:
uses_set = set(uses(te))
if uses_set & inbufs:
defs = defines(te)
assert len(defs) == 1
te.op = "IFLO_SET_INPUT"
te.args = [defs[0], 0]
def set_input(trace, inbufs):
inbufs = set(inbufs)
for i, te in trace:
uses_set = set(uses(te))
if uses_set & inbufs:
defs = defines(te)
assert len(defs) == 1
te.op = "IFLO_SET_INPUT"
te.args = [defs[0], 0]
def multislice(insns, worklist, output_track=False, debug=False):
wlist = worklist[:]
wlist.sort()
start, bufs = wlist.pop()
if wlist:
next_i, next_bufs = wlist.pop()
else:
next_i = -1
if start == -1: start = len(insns) - 1
if output_track: outbufs = set(bufs)
if not quiet:
widgets = ['Slicing: ', Percentage(), ' ', Bar(marker=RotatingMarker()), ' ', ETA()]
pbar = ProgressBar(widgets=widgets, maxval=start+1).start()
work = set(bufs)
if debug: print "Initial working set:", work
for i in range(start, -1, -1):
#print "Examining instruction",i,"(working set: %d)" % len(work)
if not quiet: pbar.update(start-i+1)
insn = insns[i]
if i == next_i:
work |= set(next_bufs)
if wlist:
next_i, next_bufs = wlist.pop()
defs_set = set(defines(insn))
uses_set = set(uses(insn))
if debug: print repr(insn)
if defs_set & work:
if debug: print "Overlap with working set: %s" % (defs_set & work)
work -= defs_set
work |= uses_set
if debug: print "Adding to slice: %s" % repr(insn)
if debug: print "Current WS:", work
# TODO: allow multiple outputs by separating outbufs into
# a dict of (label => memrange) pairs
if output_track and defs_set & outbufs:
if debug: print "Accounted for %d of %d output bytes" % (len(defs_set & outbufs), len(outbufs))
if debug: print "Instruction: %s" % repr(insn)
outbufs -= defs_set
insn.set_output_label("out")
insn.mark()
if debug: print "Working set at end:", work
def dynslice(insns, bufs, start=-1, output_track=False, debug=False):
"""Perform a dynamic data slice.
Perform a dynamic data slice of a trace with respect to a set of
buffers. This is basically the algorithm described in the
K-Tracer paper.
insns: a list of tuples: (index, TraceEntry)
bufs: a list of outputs to be tracked
start: an optional point in the trace at which to begin analysis.
By default, analysis begins at the last instruction in the
trace.
ouput_track: mark instructions that define data in the output set.
This calls TraceEntry.set_output_label().
debug: enable debugging information
Returns: a list of tuples: (index, TraceEntry)
"""
if start == -1: start = len(insns) - 1
if output_track: outbufs = set(bufs)
work = set(bufs)
slice = []
for i, insn in reversed(insns[:start + 1]):
defs_set = set(defines(insn))
uses_set = set(uses(insn))
if debug: print repr(insn)
if defs_set & work:
if debug: print "Overlap with working set: %s" % (defs_set & work)
work = (work - defs_set) | uses_set
if debug: print "Adding to slice: %s" % repr(insn)
# TODO: allow multiple outputs by separating outbufs into
# a dict of (label => memrange) pairs
if output_track and defs_set & outbufs:
outbufs -= defs_set
insn.set_output_label("out")
slice.insert(0, (i, insn))
if debug: print "Working set at end:", work
return slice
def dynslice(insns, bufs, start=-1, output_track=False, debug=False):
"""Perform a dynamic data slice.
Perform a dynamic data slice of a trace with respect to a set of
buffers. This is basically the algorithm described in the
K-Tracer paper.
insns: a list of tuples: (index, TraceEntry)
bufs: a list of outputs to be tracked
start: an optional point in the trace at which to begin analysis.
By default, analysis begins at the last instruction in the
trace.
ouput_track: mark instructions that define data in the output set.
This calls TraceEntry.set_output_label().
debug: enable debugging information
Returns: a list of tuples: (index, TraceEntry)
"""
if start == -1: start = len(insns) - 1
if output_track: outbufs = set(bufs)
work = set(bufs)
slice = []
for i, insn in reversed(insns[:start + 1]):
defs_set = set(defines(insn))
uses_set = set(uses(insn))
if debug: print repr(insn)
if defs_set & work:
if debug: print "Overlap with working set: %s" % (defs_set & work)
work = (work - defs_set) | uses_set
if debug: print "Adding to slice: %s" % repr(insn)
# TODO: allow multiple outputs by separating outbufs into
# a dict of (label => memrange) pairs
if output_track and defs_set & outbufs:
outbufs -= defs_set
insn.set_output_label("out")
slice.insert(0, (i, insn))
if debug: print "Working set at end:", work
return slice
def linked_vars(insns, sink, source, start=-1, end=0, debug=False):
if debug: print "Linking vars sink: %s source: %s between trace positions %d and %d" % (sink, source, end, start)
if start == -1: start = len(insns) - 1
work = set([sink])
for i,insn in reversed(insns[end:start+1]):
defs_set = set(defines(insn))
uses_set = set(uses(insn))
# For this one special case we DON'T want to track
# the derivation of the address of a buffer.
if is_memop(insn):
uses_set -= set(["A0"])
if defs_set & work:
work = (work - defs_set) | uses_set
if debug: print i,repr(insn)
if debug: print "Working set at end:", work
return source in work
def linked_vars(insns, sink, source, start=-1, end=0, debug=False):
if debug:
print "Linking vars sink: %s source: %s between trace positions %d and %d" % (
sink, source, end, start)
if start == -1: start = len(insns) - 1
work = set([sink])
for i, insn in reversed(insns[end:start + 1]):
defs_set = set(defines(insn))
uses_set = set(uses(insn))
# For this one special case we DON'T want to track
# the derivation of the address of a buffer.
if is_memop(insn):
uses_set -= set(["A0"])
if defs_set & work:
work = (work - defs_set) | uses_set
if debug: print i, repr(insn)
if debug: print "Working set at end:", work
return source in work
for i in xrange(len(trace) - 1, -1, -1):
idx, insn = trace[i]
if (insn.op == 'IFLO_OPS_MEM_LDL_T0_A0'
or insn.op == 'IFLO_OPS_MEM_LDL_T1_A0'):
memb_addr = insn.args[1]
memb_val = insn.args[2]
#print "Pointer dereference => Read 4 bytes at %#x = %#x" % (memb_addr,memb_val)
# Tiny version of dynamic slicing -- track A0 until it comes from somewhere else
j = i
work = set(['A0'])
slice = []
while True:
j -= 1
_, trcent = trace[j]
defs_set = set(defines(trcent))
uses_set = set(uses(trcent))
if defs_set & work:
work = (work - defs_set) | uses_set
slice.append((j, trcent))
if 'A0' not in work: break
valid = False
objbase = UInt(memb_addr)
for i, s in slice[:-1]:
if s.op == "IFLO_ADDL_A0_IM":
objbase -= UInt(s.args[0])
elif s.op == "IFLO_ADDL_A0_SEG":
pass
elif s.op == "IFLO_MOVL_A0_IM":
objbase -= UInt(s.args[0])
for i in xrange(len(trace)-1,-1,-1):
idx, insn = trace[i]
if (insn.op == 'IFLO_OPS_MEM_LDL_T0_A0' or insn.op == 'IFLO_OPS_MEM_LDL_T1_A0'):
memb_addr = insn.args[1]
memb_val = insn.args[2]
#print "Pointer dereference => Read 4 bytes at %#x = %#x" % (memb_addr,memb_val)
# Tiny version of dynamic slicing -- track A0 until it comes from somewhere else
j = i
work = set(['A0'])
slice = []
while True:
j -= 1
_ , trcent = trace[j]
defs_set = set(defines(trcent))
uses_set = set(uses(trcent))
if defs_set & work:
work = (work - defs_set) | uses_set
slice.append((j,trcent))
if 'A0' not in work: break
valid = False
objbase = UInt(memb_addr)
for i,s in slice[:-1]:
if s.op == "IFLO_ADDL_A0_IM":
objbase -= UInt(s.args[0])
elif s.op == "IFLO_ADDL_A0_SEG":
pass
elif s.op == "IFLO_MOVL_A0_IM":
objbase -= UInt(s.args[0])
