def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoint = self.getParameterValue(self.START_POINT)
strategy = self.getParameterValue(self.STRATEGY)
travelCost = self.getParameterValue(self.TRAVEL_COST)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
tmp = startPoint.split(',')
startPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(iface.mapCanvas().mapSettings().destinationCrs(),
iface.mapCanvas().hasCrsTransformEnabled(),
tolerance)
progress.setInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint])
progress.setInfo(self.tr('Calculating service area...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree [i]).outVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
upperBoundary = []
lowerBoundary = []
for i in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[i]).inVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[i]).outVertex()).point())
progress.setInfo(self.tr('Writting results...'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
writer = self.getOutputFromName(
self.OUTPUT_POINTS).getVectorWriter(
fields,
QgsWkbTypes.MultiPoint,
layer.crs())
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
del writer
writer = self.getOutputFromName(
self.OUTPUT_POLYGON).getVectorWriter(
fields,
QgsWkbTypes.Polygon,
layer.crs())
geom = geomUpper.convexHull()
feat.setGeometry(geom)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
geom = geomLower.convexHull()
feat.setGeometry(geom)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
del writer
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoints = dataobjects.getObjectFromUri(
self.getParameterValue(self.START_POINTS))
strategy = self.getParameterValue(self.STRATEGY)
travelCost = self.getParameterValue(self.TRAVEL_COST)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
writerPoints = self.getOutputFromName(
self.OUTPUT_POINTS).getVectorWriter(
fields,
QgsWkbTypes.MultiPoint,
layer.crs())
writerPolygons = self.getOutputFromName(
self.OUTPUT_POLYGON).getVectorWriter(
fields,
QgsWkbTypes.Polygon,
layer.crs())
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(iface.mapCanvas().mapSettings().destinationCrs(),
iface.mapCanvas().hasCrsTransformEnabled(),
tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags() ^ QgsFeatureRequest.SubsetOfAttributes)
features = vector.features(startPoints, request)
points = []
for f in features:
points.append(f.geometry().asPoint())
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points)
feedback.pushInfo(self.tr('Calculating service areas...'))
graph = builder.graph()
vertices = []
upperBoundary = []
lowerBoundary = []
total = 100.0 / len(snappedPoints)
for i, p in enumerate(snappedPoints):
idxStart = graph.findVertex(snappedPoints[i])
origPoint = points[i].toString()
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
for j, v in enumerate(cost):
if v > travelCost and tree[j] != -1:
vertexId = graph.edge(tree[j]).outVertex()
if cost[vertexId] <= travelCost:
vertices.append(j)
for j in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[j]).inVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[j]).outVertex()).point())
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = origPoint
writerPoints.addFeature(feat)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = origPoint
writerPoints.addFeature(feat)
upperBoundary.append(startPoint)
lowerBoundary.append(startPoint)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
geom = geomUpper.convexHull()
feat.setGeometry(geom)
feat['type'] = 'upper'
feat['start'] = origPoint
writerPolygons.addFeature(feat)
geom = geomLower.convexHull()
feat.setGeometry(geom)
feat['type'] = 'lower'
feat['start'] = origPoint
writerPolygons.addFeature(feat)
vertices[:] = []
upperBoundary[:] = []
lowerBoundary[:] = []
feedback.setProgress(int(i * total))
del writerPoints
del writerPolygons
def generate_od_routes(
network_layer: QgsVectorLayer,
origin_layer: QgsVectorLayer,
poi_layer: QgsVectorLayer,
size_field: str,
class_field: str,
work_layer: QgsVectorLayer = None,
work_size_field: str = None,
school_layer: QgsVectorLayer = None,
school_size_field: str = None,
origin_weight_field: str = None,
socio_data=None,
health_data=None,
diversity_data=None,
join_on: str = None,
max_distance: int = 25000,
return_layer: bool = True,
return_raw: bool = False,
feedback: QgsProcessingFeedback = None,
) -> QgsVectorLayer:
"""
Shortest path algorithm based on Dijkstra's algorithm
:param network_layer: road network
:param points_layer: combined from to points
:param relations_data: tabular from to id data
:param origin_field: name of from field
:param destination_field: name of to field
:param max_distance: maximum distance/cost
:param crs: output layer crs
"""
if not network_layer.wkbType() & QgsWkbTypes.LineString:
raise Exception('Network layer must be of type LineString')
crs = network_layer.crs()
## prepare graph
director = QgsVectorLayerDirector(
source=network_layer,
directionFieldId=-1,
directDirectionValue='',
reverseDirectionValue='',
bothDirectionValue='',
defaultDirection=QgsVectorLayerDirector.DirectionBoth,
)
# First strategy is for actual shortest distance calculation
director.addStrategy(QgsNetworkDistanceStrategy()) # 0
# Second strategy is a hack to be able to recover the edge id
director.addStrategy(SaveFidStrategy()) # 1
builder = QgsGraphBuilder(crs)
## spatial index
poi_sidx = QgsSpatialIndex(poi_layer)
work_sidx = QgsSpatialIndex(work_layer)
school_sidx = QgsSpatialIndex(school_layer)
## prepare points
orig_n = len(origin_layer)
poi_n = len(poi_layer)
work_n = len(work_layer) if work_layer else 0
school_n = len(school_layer) if school_layer else 0
dest_n = poi_n + work_n + school_n
orig_points = [None] * orig_n
orig_sizes = np.zeros(orig_n, dtype=float)
if socio_data:
orig_socio = np.zeros(orig_n, dtype=float)
dest_points = [None] * dest_n
dest_sizes = [None] * dest_n
dest_fids = [None] * dest_n
dest_cats = [None] * dest_n
orig_id_field = 'deso'
for i, feat in enumerate(origin_layer.getFeatures()):
orig_points[i] = feat.geometry().asPoint()
orig_sizes[i] = feat[size_field] * (
feat[origin_weight_field] if origin_weight_field else 1
)
if socio_data:
orig_socio[i] = socio_data[
feat[orig_id_field]
] # FIXME: check if all origins have data
if socio_data:
orig_socio = orig_socio / np.mean(orig_socio)
orig_sizes *= orig_socio
for i, feat in enumerate(poi_layer.getFeatures()):
dest_points[i] = feat.geometry().asPoint()
dest_fids[i] = feat.id()
dest_sizes[i] = 1 # TODO: dest size
dest_cats[i] = poi_class_map.get(feat[class_field])
if work_layer:
for i, feat in enumerate(work_layer.getFeatures(), start=poi_n):
dest_points[i] = feat.geometry().asPoint()
dest_fids[i] = feat.id()
dest_sizes[i] = feat[work_size_field] # TODO: dest size
dest_cats[i] = 'work'
if school_layer:
for i, feat in enumerate(school_layer.getFeatures(), start=(poi_n + work_n)):
dest_points[i] = feat.geometry().asPoint()
dest_fids[i] = feat.id()
dest_sizes[i] = feat[school_size_field] # TODO: dest size
dest_cats[i] = 'school'
# points = [origin.point for origin in origins_data] + [
# dest.point for dest in dests_data
# ]
if feedback is None:
feedback = QgsProcessingFeedback()
def progress(p):
if int(10 * p % 100) == 0:
print(f'{int(p):#3d}%')
feedback.progressChanged.connect(progress)
with timing('build network graph'):
tied_points = director.makeGraph(
builder, orig_points + dest_points, feedback=feedback
)
graph = builder.graph()
orig_tied_points = tied_points[:orig_n]
dest_tied_points = tied_points[orig_n:]
poi_tied_points = dest_tied_points[:poi_n]
work_tied_points = dest_tied_points[poi_n : poi_n + work_n]
school_tied_points = dest_tied_points[poi_n + work_n :]
dest_fid_to_tied_points = dict(zip(dest_fids, enumerate(dest_tied_points)))
poi_fid_to_tied_points = dict(zip(dest_fids[:poi_n], enumerate(poi_tied_points)))
work_fid_to_tied_points = dict(
zip(dest_fids[poi_n : poi_n + work_n], enumerate(work_tied_points, start=poi_n))
)
school_fid_to_tied_points = dict(
zip(
dest_fids[poi_n + work_n :],
enumerate(school_tied_points, start=poi_n + work_n),
)
)
orig_dests = [None] * orig_n
for i, point in enumerate(orig_points):
orig_dests[i] = (
[
poi_fid_to_tied_points[fid]
for fid in poi_sidx.nearestNeighbor(
point, neighbors=MAX_NEIGHBORS, maxDistance=max_distance
)
]
+ [
work_fid_to_tied_points[fid]
for fid in work_sidx.nearestNeighbor(
point, neighbors=MAX_NEIGHBORS, maxDistance=max_distance
)
]
+ [
school_fid_to_tied_points[fid]
for fid in school_sidx.nearestNeighbor(
point, neighbors=MAX_NEIGHBORS, maxDistance=max_distance
)
]
)
step = 100.0 / orig_n
time_dijkstra = 0.0
time_find = 0.0
time_route = 0.0
with timing('calculate connecting routes'):
routes = []
# for i, (origin_fid, dest_fids) in enumerate(od_data):
for i, (orig_point, dests) in enumerate(zip(orig_tied_points, orig_dests)):
origin_vertex_id = graph.findVertex(orig_point)
# Calculate the tree and cost using the distance strategy (#0)
ts = time()
(tree, cost) = QgsGraphAnalyzer.dijkstra(graph, origin_vertex_id, 0)
time_dijkstra += time() - ts
for j, dest_point in dests:
if feedback.isCanceled():
return
if dest_sizes[j] <= 0:
continue
category = dest_cats[j]
if category is None:
continue
ts = time()
dest_vertex_id = graph.findVertex(dest_point)
time_find += time() - ts
if tree[dest_vertex_id] != -1 and (
cost[dest_vertex_id] <= MAX_DISTANCE_M
or MAX_DISTANCE_M <= 0 # TODO: enable skipping max distance
):
route_distance = cost[dest_vertex_id]
# route_points = [graph.vertex(dest_vertex_id).point()]
cur_vertex_id = dest_vertex_id
route_fids = []
# Iterate the graph from dest to origin saving the edges
ts = time()
while cur_vertex_id != origin_vertex_id:
cur_edge = graph.edge(tree[cur_vertex_id])
# Here we recover the edge id through strategy #1
route_fids.append(cur_edge.cost(1))
cur_vertex_id = cur_edge.fromVertex()
# route_points.append(graph.vertex(cur_vertex_id).point())
time_route += time() - ts
# route_points.reverse()
# route_geom = QgsGeometry.fromPolylineXY(route_points))
# Hack to remove duplicate fids
route_fids = list(
dict.fromkeys(route_fids)
) # NOTE: requires python >= 3.7 for ordered dict FIXME: add python version check
route_fids.reverse()
# Calc
# TODO: Move to matrix and vectorize calculation using numpy
gravity_value = poi_gravity_values[category]
bike_params = mode_params_bike[category]
ebike_params = mode_params_ebike[category]
# NOTE: we include dest size in decay here
decay = dest_sizes[j] * math.exp(
gravity_value * route_distance / 1000.0
)
p_bike = sigmoid(*bike_params, route_distance)
p_ebike = sigmoid(*ebike_params, route_distance)
# TODO: use namedtuple or dataclass
routes.append(
Route(
i,
j,
category,
route_distance,
decay,
p_bike,
p_ebike,
route_fids,
)
)
feedback.setProgress(i * step)
print(f'dijkstra took: {time_dijkstra:#1.2f} sec')
print(f'find vertex took: {time_find:#1.2f} sec')
print(f'route took: {time_route:#1.2f} sec')
with timing('post process routes'):
alpha_bike = 0.8
alpha_ebke = 0.2
decay_sums = {cat: defaultdict(float) for cat in poi_categories}
bike_values = {cat: defaultdict(float) for cat in poi_categories}
ebike_values = {cat: defaultdict(float) for cat in poi_categories}
for route in routes:
# NOTE: dest size is included in decay
decay_sums[route.cat][route.i] += route.decay
for route in routes:
decay_sum = decay_sums[route.cat][route.i]
# TODO: add T_p and alpha_m
T_p = trip_generation[route.cat]
bike_value = (
T_p
* alpha_bike
* orig_sizes[route.i]
* route.p_bike
* route.decay
/ decay_sum
)
ebike_value = (
T_p
* alpha_ebke
* orig_sizes[route.i]
* route.p_ebike
* route.decay
/ decay_sum
)
for fid in route.net_fids:
bike_values[route.cat][fid] += float(bike_value)
ebike_values[route.cat][fid] += float(ebike_value)
# FIXME: Un-kludge this
with timing('create result features'):
fields = get_fields()
segments = []
for feature in network_layer.getFeatures():
fid = feature.id()
segment = QgsFeature(fields)
segment.setGeometry(QgsGeometry(feature.geometry()))
segment['network_fid'] = fid
flow = 0.0
for cat in poi_categories:
bike_field = f'{cat}_bike_value'
ebike_field = f'{cat}_ebike_value'
flow_bike = segment[bike_field] = bike_values[cat].get(fid)
flow_ebke = segment[ebike_field] = ebike_values[cat].get(fid)
if flow_bike is not None:
flow += flow_bike
if flow_ebke is not None:
flow += flow_ebke
segment['flow'] = flow
segment['lts'] = feature['lts']
segment['vgu'] = feature['vgu']
segment['R'] = flow * feature['ratio']
segments.append(segment)
if not return_layer:
if return_raw:
return segments, bike_values, ebike_values
return segments
with timing('create result layer'):
output_layer = QgsVectorLayer(
f'LineString?crs={crs.toWkt()}', 'segments', 'memory'
)
with edit(output_layer):
for field in fields:
output_layer.addAttribute(field)
output_layer.addFeatures(segments, flags=QgsFeatureSink.FastInsert)
return output_layer
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(
self.invalidSourceError(parameters, self.INPUT))
startPoint = self.parameterAsPoint(parameters, self.START_POINT,
context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST,
context)
directionFieldName = self.parameterAsString(parameters,
self.DIRECTION_FIELD,
context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD,
context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD,
context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH,
context)
defaultDirection = self.parameterAsEnum(parameters,
self.DEFAULT_DIRECTION,
context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD,
context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED,
context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
include_bounds = True # default to true to maintain 3.0 API
if self.INCLUDE_BOUNDS in parameters:
include_bounds = self.parameterAsBool(parameters,
self.INCLUDE_BOUNDS, context)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network, directionField,
forwardValue, backwardValue,
bothValue, defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(), True, tolerance)
feedback.pushInfo(
QCoreApplication.translate('ServiceAreaFromPoint',
'Building graph…'))
snappedPoints = director.makeGraph(builder, [startPoint], feedback)
feedback.pushInfo(
QCoreApplication.translate('ServiceAreaFromPoint',
'Calculating service area…'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = set()
points = []
lines = []
for vertex, start_vertex_cost in enumerate(cost):
inbound_edge_index = tree[vertex]
if inbound_edge_index == -1 and vertex != idxStart:
# unreachable vertex
continue
if start_vertex_cost > travelCost:
# vertex is too expensive, discard
continue
vertices.add(vertex)
start_point = graph.vertex(vertex).point()
# find all edges coming from this vertex
for edge_id in graph.vertex(vertex).outgoingEdges():
edge = graph.edge(edge_id)
end_vertex_cost = start_vertex_cost + edge.cost(0)
end_point = graph.vertex(edge.toVertex()).point()
if end_vertex_cost <= travelCost:
# end vertex is cheap enough to include
vertices.add(edge.toVertex())
lines.append([start_point, end_point])
else:
# travelCost sits somewhere on this edge, interpolate position
interpolated_end_point = QgsGeometryUtils.interpolatePointOnLineByValue(
start_point.x(), start_point.y(), start_vertex_cost,
end_point.x(), end_point.y(), end_vertex_cost,
travelCost)
points.append(interpolated_end_point)
lines.append([start_point, interpolated_end_point])
for i in vertices:
points.append(graph.vertex(i).point())
feedback.pushInfo(
QCoreApplication.translate('ServiceAreaFromPoint',
'Writing results…'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
(point_sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT,
context, fields,
QgsWkbTypes.MultiPoint,
network.sourceCrs())
results = {}
if point_sink is not None:
results[self.OUTPUT] = dest_id
geomPoints = QgsGeometry.fromMultiPointXY(points)
feat.setGeometry(geomPoints)
feat['type'] = 'within'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
if include_bounds:
upperBoundary = []
lowerBoundary = []
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree[i]).fromVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
for i in vertices:
upperBoundary.append(
graph.vertex(graph.edge(tree[i]).toVertex()).point())
lowerBoundary.append(
graph.vertex(graph.edge(tree[i]).fromVertex()).point())
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
(line_sink,
line_dest_id) = self.parameterAsSink(parameters, self.OUTPUT_LINES,
context, fields,
QgsWkbTypes.MultiLineString,
network.sourceCrs())
if line_sink is not None:
results[self.OUTPUT_LINES] = line_dest_id
geom_lines = QgsGeometry.fromMultiPolylineXY(lines)
feat.setGeometry(geom_lines)
feat['type'] = 'lines'
feat['start'] = startPoint.toString()
line_sink.addFeature(feat, QgsFeatureSink.FastInsert)
return results
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoints = self.parameterAsSource(parameters, self.START_POINTS, context)
endPoint = self.parameterAsPoint(parameters, self.END_POINT, context)
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.LineString, network.sourceCrs())
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(context.project().crs(),
True,
tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags() ^ QgsFeatureRequest.SubsetOfAttributes)
request.setDestinationCrs(network.sourceCrs())
features = startPoints.getFeatures(request)
total = 100.0 / startPoints.featureCount() if startPoints.featureCount() else 0
points = [endPoint]
for current, f in enumerate(features):
if feedback.isCanceled():
break
points.append(f.geometry().asPoint())
feedback.setProgress(int(current * total))
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(self.tr('Calculating shortest paths...'))
graph = builder.graph()
idxEnd = graph.findVertex(snappedPoints[0])
route = []
nPoints = len(snappedPoints)
total = 100.0 / nPoints if nPoints else 1
for i in range(1, count + 1):
if feedback.isCanceled():
break
idxStart = graph.findVertex(snappedPoints[i])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
msg = self.tr('There is no route from start point ({}) to end point ({}).'.format(points[i].toString(), endPoint.toString()))
feedback.setProgressText(msg)
QgsMessageLog.logMessage(msg, self.tr('Processing'), QgsMessageLog.WARNING)
continue
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[i])
route.reverse()
geom = QgsGeometry.fromPolyline(route)
feat.setGeometry(geom)
feat['start'] = points[i].toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
sink.addFeature(feat, QgsFeatureSink.FastInsert)
route[:] = []
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoint = self.getParameterValue(self.START_POINT)
endPoint = self.getParameterValue(self.END_POINT)
strategy = self.getParameterValue(self.STRATEGY)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
writer = self.getOutputFromName(
self.OUTPUT_LAYER).getVectorWriter(
fields.toList(),
QgsWkbTypes.LineString,
layer.crs())
tmp = startPoint.split(',')
startPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
tmp = endPoint.split(',')
endPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(iface.mapCanvas().mapSettings().destinationCrs(),
iface.mapCanvas().hasCrsTransformEnabled(),
tolerance)
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint, endPoint])
feedback.pushInfo(self.tr('Calculating shortest path...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
idxEnd = graph.findVertex(snappedPoints[1])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
raise GeoAlgorithmExecutionException(
self.tr('There is no route from start point to end point.'))
route = []
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[0])
route.reverse()
self.setOutputValue(self.TRAVEL_COST, cost / multiplier)
feedback.pushInfo(self.tr('Writing results...'))
geom = QgsGeometry.fromPolyline(route)
feat = QgsFeature()
feat.setFields(fields)
feat['start'] = startPoint.toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
feat.setGeometry(geom)
writer.addFeature(feat)
del writer
def processAlgorithm(self, parameters, context, feedback):
layer = QgsProcessingUtils.mapLayerFromString(
self.getParameterValue(self.INPUT_VECTOR), context)
startPoint = self.getParameterValue(self.START_POINT)
endPoint = self.getParameterValue(self.END_POINT)
strategy = self.getParameterValue(self.STRATEGY)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields, QgsWkbTypes.LineString, layer.crs(), context)
tmp = startPoint.split(',')
startPoint = QgsPointXY(float(tmp[0]), float(tmp[1]))
tmp = endPoint.split(',')
endPoint = QgsPointXY(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer, directionField, forwardValue,
backwardValue, bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(
iface.mapCanvas().mapSettings().destinationCrs(), True, tolerance)
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint, endPoint])
feedback.pushInfo(self.tr('Calculating shortest path...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
idxEnd = graph.findVertex(snappedPoints[1])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
raise GeoAlgorithmExecutionException(
self.tr('There is no route from start point to end point.'))
route = []
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(
graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[0])
route.reverse()
self.setOutputValue(self.TRAVEL_COST, cost / multiplier)
feedback.pushInfo(self.tr('Writing results...'))
geom = QgsGeometry.fromPolyline(route)
feat = QgsFeature()
feat.setFields(fields)
feat['start'] = startPoint.toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
feat.setGeometry(geom)
writer.addFeature(feat)
del writer
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT))
startPoint = self.parameterAsPoint(parameters, self.START_POINT, context, network.sourceCrs())
endPoint = self.parameterAsPoint(parameters, self.END_POINT, context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.LineString, network.sourceCrs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
directionField = -1
if directionField:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Building graph…'))
snappedPoints = director.makeGraph(builder, [startPoint, endPoint], feedback)
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Calculating shortest path…'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
idxEnd = graph.findVertex(snappedPoints[1])
tree, costs = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
raise QgsProcessingException(
self.tr('There is no route from start point to end point.'))
route = [graph.vertex(idxEnd).point()]
cost = costs[idxEnd]
current = idxEnd
while current != idxStart:
current = graph.edge(tree[current]).fromVertex()
route.append(graph.vertex(current).point())
route.reverse()
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Writing results…'))
geom = QgsGeometry.fromPolylineXY(route)
feat = QgsFeature()
feat.setFields(fields)
feat['start'] = startPoint.toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
feat.setGeometry(geom)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
results = {}
results[self.TRAVEL_COST] = cost / multiplier
results[self.OUTPUT] = dest_id
return results
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoint = self.getParameterValue(self.START_POINT)
strategy = self.getParameterValue(self.STRATEGY)
travelCost = self.getParameterValue(self.TRAVEL_COST)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
tmp = startPoint.split(',')
startPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer, directionField, forwardValue,
backwardValue, bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(
iface.mapCanvas().mapSettings().destinationCrs(), True, tolerance)
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint])
feedback.pushInfo(self.tr('Calculating service area...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree[i]).outVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
upperBoundary = []
lowerBoundary = []
for i in vertices:
upperBoundary.append(
graph.vertex(graph.edge(tree[i]).inVertex()).point())
lowerBoundary.append(
graph.vertex(graph.edge(tree[i]).outVertex()).point())
feedback.pushInfo(self.tr('Writing results...'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
writer = self.getOutputFromName(self.OUTPUT_POINTS).getVectorWriter(
fields, QgsWkbTypes.MultiPoint, layer.crs())
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
del writer
upperBoundary.append(startPoint)
lowerBoundary.append(startPoint)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
writer = self.getOutputFromName(self.OUTPUT_POLYGON).getVectorWriter(
fields, QgsWkbTypes.Polygon, layer.crs())
geom = geomUpper.convexHull()
feat.setGeometry(geom)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
geom = geomLower.convexHull()
feat.setGeometry(geom)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
writer.addFeature(feat)
del writer
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoint = self.parameterAsPoint(parameters, self.START_POINT,
context)
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST,
context)
directionFieldName = self.parameterAsString(parameters,
self.DIRECTION_FIELD,
context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD,
context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD,
context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH,
context)
defaultDirection = self.parameterAsEnum(parameters,
self.DEFAULT_DIRECTION,
context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD,
context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED,
context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network, directionField,
forwardValue, backwardValue,
bothValue, defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(context.project().crs(), True, tolerance)
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint], feedback)
feedback.pushInfo(self.tr('Calculating service area...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree[i]).outVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
upperBoundary = []
lowerBoundary = []
for i in vertices:
upperBoundary.append(
graph.vertex(graph.edge(tree[i]).inVertex()).point())
lowerBoundary.append(
graph.vertex(graph.edge(tree[i]).outVertex()).point())
feedback.pushInfo(self.tr('Writing results...'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
(sinkPoints, pointsId) = self.parameterAsSink(parameters,
self.OUTPUT_POINTS,
context, fields,
QgsWkbTypes.MultiPoint,
network.sourceCrs())
(sinkPolygon,
polygonId) = self.parameterAsSink(parameters, self.OUTPUT_POLYGON,
context, fields,
QgsWkbTypes.Polygon,
network.sourceCrs())
results = {}
if sinkPoints:
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
sinkPoints.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
sinkPoints.addFeature(feat, QgsFeatureSink.FastInsert)
upperBoundary.append(startPoint)
lowerBoundary.append(startPoint)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
results[self.OUTPUT_POINTS] = pointsId
if sinkPolygon:
geom = geomUpper.convexHull()
feat.setGeometry(geom)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
sinkPolygon.addFeature(feat, QgsFeatureSink.FastInsert)
geom = geomLower.convexHull()
feat.setGeometry(geom)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
sinkPolygon.addFeature(feat, QgsFeatureSink.FastInsert)
results[self.OUTPUT_POLYGON] = polygonId
return results
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoints = self.parameterAsSource(parameters, self.START_POINTS,
context)
endPoint = self.parameterAsPoint(parameters, self.END_POINT, context)
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters,
self.DIRECTION_FIELD,
context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD,
context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD,
context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH,
context)
defaultDirection = self.parameterAsEnum(parameters,
self.DEFAULT_DIRECTION,
context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD,
context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED,
context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT,
context, fields,
QgsWkbTypes.LineString,
network.sourceCrs())
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network, directionField,
forwardValue, backwardValue,
bothValue, defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(context.project().crs(), True, tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags()
^ QgsFeatureRequest.SubsetOfAttributes)
request.setDestinationCrs(network.sourceCrs())
features = startPoints.getFeatures(request)
total = 100.0 / startPoints.featureCount() if startPoints.featureCount(
) else 0
points = [endPoint]
for current, f in enumerate(features):
if feedback.isCanceled():
break
points.append(f.geometry().asPoint())
feedback.setProgress(int(current * total))
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(self.tr('Calculating shortest paths...'))
graph = builder.graph()
idxEnd = graph.findVertex(snappedPoints[0])
route = []
nPoints = len(snappedPoints)
total = 100.0 / nPoints if nPoints else 1
for i in range(1, count + 1):
if feedback.isCanceled():
break
idxStart = graph.findVertex(snappedPoints[i])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
msg = self.tr(
'There is no route from start point ({}) to end point ({}).'
.format(points[i].toString(), endPoint.toString()))
feedback.setProgressText(msg)
QgsMessageLog.logMessage(msg, self.tr('Processing'),
QgsMessageLog.WARNING)
continue
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(
graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[i])
route.reverse()
geom = QgsGeometry.fromPolyline(route)
feat.setGeometry(geom)
feat['start'] = points[i].toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
sink.addFeature(feat, QgsFeatureSink.FastInsert)
route[:] = []
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoints = dataobjects.getObjectFromUri(
self.getParameterValue(self.START_POINTS))
strategy = self.getParameterValue(self.STRATEGY)
travelCost = self.getParameterValue(self.TRAVEL_COST)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
writerPoints = self.getOutputFromName(
self.OUTPUT_POINTS).getVectorWriter(
fields,
QgsWkbTypes.MultiPoint,
layer.crs())
writerPolygons = self.getOutputFromName(
self.OUTPUT_POLYGON).getVectorWriter(
fields,
QgsWkbTypes.Polygon,
layer.crs())
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(iface.mapCanvas().mapSettings().destinationCrs(),
iface.mapCanvas().hasCrsTransformEnabled(),
tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags() ^ QgsFeatureRequest.SubsetOfAttributes)
features = vector.features(startPoints, request)
points = []
for f in features:
points.append(f.geometry().asPoint())
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points)
feedback.pushInfo(self.tr('Calculating service areas...'))
graph = builder.graph()
vertices = []
upperBoundary = []
lowerBoundary = []
total = 100.0 / len(snappedPoints)
for i, p in enumerate(snappedPoints):
idxStart = graph.findVertex(snappedPoints[i])
origPoint = points[i].toString()
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
for j, v in enumerate(cost):
if v > travelCost and tree[j] != -1:
vertexId = graph.edge(tree[j]).outVertex()
if cost[vertexId] <= travelCost:
vertices.append(j)
for j in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[j]).inVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[j]).outVertex()).point())
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = origPoint
writerPoints.addFeature(feat)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = origPoint
writerPoints.addFeature(feat)
upperBoundary.append(startPoint)
lowerBoundary.append(startPoint)
geomUpper = QgsGeometry.fromMultiPoint(upperBoundary)
geomLower = QgsGeometry.fromMultiPoint(lowerBoundary)
geom = geomUpper.convexHull()
feat.setGeometry(geom)
feat['type'] = 'upper'
feat['start'] = origPoint
writerPolygons.addFeature(feat)
geom = geomLower.convexHull()
feat.setGeometry(geom)
feat['type'] = 'lower'
feat['start'] = origPoint
writerPolygons.addFeature(feat)
vertices[:] = []
upperBoundary[:] = []
lowerBoundary[:] = []
feedback.setProgress(int(i * total))
del writerPoints
del writerPolygons
def calcShortestTree(self, startpoint_id, criterion):
tree = QgsGraphAnalyzer.shortestTree(self.network, startpoint_id,
criterion)
return tree
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoint = self.parameterAsPoint(parameters, self.START_POINT, context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, [startPoint], feedback)
feedback.pushInfo(self.tr('Calculating service area...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree[i]).fromVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
upperBoundary = []
lowerBoundary = []
for i in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[i]).toVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[i]).fromVertex()).point())
feedback.pushInfo(self.tr('Writing results...'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.MultiPoint, network.sourceCrs())
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
sink.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
sink.addFeature(feat, QgsFeatureSink.FastInsert)
upperBoundary.append(startPoint)
lowerBoundary.append(startPoint)
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
return {self.OUTPUT: dest_id}
def processAlgorithm(self, feedback):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoints = dataobjects.getObjectFromUri(
self.getParameterValue(self.START_POINTS))
endPoint = self.getParameterValue(self.END_POINT)
strategy = self.getParameterValue(self.STRATEGY)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
writer = self.getOutputFromName(self.OUTPUT_LAYER).getVectorWriter(
fields.toList(), QgsWkbTypes.LineString, layer.crs())
tmp = endPoint.split(',')
endPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer, directionField, forwardValue,
backwardValue, bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(
iface.mapCanvas().mapSettings().destinationCrs(), True, tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags()
^ QgsFeatureRequest.SubsetOfAttributes)
features = vector.features(startPoints, request)
count = len(features)
points = [endPoint]
for f in features:
points.append(f.geometry().asPoint())
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points)
feedback.pushInfo(self.tr('Calculating shortest paths...'))
graph = builder.graph()
idxEnd = graph.findVertex(snappedPoints[0])
route = []
total = 100.0 / count
for i in range(1, count + 1):
idxStart = graph.findVertex(snappedPoints[i])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
msg = self.tr(
'There is no route from start point ({}) to end point ({}).'
.format(points[i].toString(), endPoint.toString()))
feedback.setProgressText(msg)
ProcessingLog.addToLog(ProcessingLog.LOG_WARNING, msg)
continue
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(
graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[i])
route.reverse()
geom = QgsGeometry.fromPolyline(route)
feat.setGeometry(geom)
feat['start'] = points[i].toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
writer.addFeature(feat)
route[:] = []
feedback.setProgress(int(i * total))
del writer
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoints = self.parameterAsSource(parameters, self.START_POINTS, context)
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = startPoints.fields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setDestinationCrs(network.sourceCrs())
features = startPoints.getFeatures(request)
total = 100.0 / startPoints.featureCount() if startPoints.featureCount() else 0
points = []
source_attributes = {}
i = 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
for p in f.geometry().vertices():
points.append(QgsPointXY(p))
source_attributes[i] = f.attributes()
i += 1
feedback.setProgress(int(current * total))
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(self.tr('Calculating service areas...'))
graph = builder.graph()
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.MultiPoint, network.sourceCrs())
vertices = []
upperBoundary = []
lowerBoundary = []
total = 100.0 / len(snappedPoints) if snappedPoints else 1
for i, p in enumerate(snappedPoints):
if feedback.isCanceled():
break
idxStart = graph.findVertex(snappedPoints[i])
origPoint = points[i].toString()
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
for j, v in enumerate(cost):
if v > travelCost and tree[j] != -1:
vertexId = graph.edge(tree[j]).fromVertex()
if cost[vertexId] <= travelCost:
vertices.append(j)
for j in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[j]).toVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[j]).fromVertex()).point())
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
feat.setGeometry(geomUpper)
attrs = source_attributes[i]
attrs.extend(['upper', origPoint])
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
attrs[-2] = 'lower'
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
vertices[:] = []
upperBoundary[:] = []
lowerBoundary[:] = []
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(
self.invalidSourceError(parameters, self.INPUT))
startPoint = self.parameterAsPoint(parameters, self.START_POINT,
context, network.sourceCrs())
endPoints = self.parameterAsSource(parameters, self.END_POINTS,
context)
if endPoints is None:
raise QgsProcessingException(
self.invalidSourceError(parameters, self.END_POINTS))
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters,
self.DIRECTION_FIELD,
context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD,
context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD,
context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH,
context)
defaultDirection = self.parameterAsEnum(parameters,
self.DEFAULT_DIRECTION,
context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD,
context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED,
context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = endPoints.fields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT,
context, fields,
QgsWkbTypes.LineString,
network.sourceCrs())
if sink is None:
raise QgsProcessingException(
self.invalidSinkError(parameters, self.OUTPUT))
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network, directionField,
forwardValue, backwardValue,
bothValue, defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(), True, tolerance)
feedback.pushInfo(
QCoreApplication.translate('ShortestPathPointToLayer',
'Loading end points…'))
request = QgsFeatureRequest()
request.setDestinationCrs(network.sourceCrs(),
context.transformContext())
features = endPoints.getFeatures(request)
total = 100.0 / endPoints.featureCount() if endPoints.featureCount(
) else 0
points = [startPoint]
source_attributes = {}
i = 1
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
for p in f.geometry().vertices():
points.append(QgsPointXY(p))
source_attributes[i] = f.attributes()
i += 1
feedback.setProgress(int(current * total))
feedback.pushInfo(
QCoreApplication.translate('ShortestPathPointToLayer',
'Building graph…'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(
QCoreApplication.translate('ShortestPathPointToLayer',
'Calculating shortest paths…'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, costs = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
nPoints = len(snappedPoints)
total = 100.0 / nPoints if nPoints else 1
for i in range(1, nPoints):
if feedback.isCanceled():
break
idxEnd = graph.findVertex(snappedPoints[i])
if tree[idxEnd] == -1:
msg = self.tr(
'There is no route from start point ({}) to end point ({}).'
.format(startPoint.toString(), points[i].toString()))
feedback.reportError(msg)
# add feature with no geometry
feat.clearGeometry()
attrs = source_attributes[i]
attrs.extend([NULL, points[i].toString()])
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
continue
route = [graph.vertex(idxEnd).point()]
cost = costs[idxEnd]
current = idxEnd
while current != idxStart:
current = graph.edge(tree[current]).fromVertex()
route.append(graph.vertex(current).point())
route.reverse()
geom = QgsGeometry.fromPolylineXY(route)
attrs = source_attributes[i]
attrs.extend([
startPoint.toString(), points[i].toString(), cost / multiplier
])
feat.setAttributes(attrs)
feat.setGeometry(geom)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT))
startPoints = self.parameterAsSource(parameters, self.START_POINTS, context)
if startPoints is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.START_POINTS))
endPoint = self.parameterAsPoint(parameters, self.END_POINT, context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = startPoints.fields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.LineString, network.sourceCrs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(QCoreApplication.translate('ShortestPathLayerToPoint', 'Loading start points…'))
request = QgsFeatureRequest()
request.setDestinationCrs(network.sourceCrs(), context.transformContext())
features = startPoints.getFeatures(request)
total = 100.0 / startPoints.featureCount() if startPoints.featureCount() else 0
points = [endPoint]
source_attributes = {}
i = 1
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
for p in f.geometry().vertices():
points.append(QgsPointXY(p))
source_attributes[i] = f.attributes()
i += 1
feedback.setProgress(int(current * total))
feedback.pushInfo(QCoreApplication.translate('ShortestPathLayerToPoint', 'Building graph…'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(QCoreApplication.translate('ShortestPathLayerToPoint', 'Calculating shortest paths…'))
graph = builder.graph()
idxEnd = graph.findVertex(snappedPoints[0])
nPoints = len(snappedPoints)
total = 100.0 / nPoints if nPoints else 1
for i in range(1, nPoints):
if feedback.isCanceled():
break
idxStart = graph.findVertex(snappedPoints[i])
tree, costs = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
msg = self.tr('There is no route from start point ({}) to end point ({}).'.format(points[i].toString(), endPoint.toString()))
feedback.reportError(msg)
# add feature with no geometry
feat.clearGeometry()
attrs = source_attributes[i]
attrs.append(points[i].toString())
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
continue
route = [graph.vertex(idxEnd).point()]
cost = costs[idxEnd]
current = idxEnd
while current != idxStart:
current = graph.edge(tree[current]).fromVertex()
route.append(graph.vertex(current).point())
route.reverse()
geom = QgsGeometry.fromPolylineXY(route)
feat.setGeometry(geom)
attrs = source_attributes[i]
attrs.extend([points[i].toString(), endPoint.toString(), cost / multiplier])
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
startPoints = self.parameterAsSource(parameters, self.START_POINTS,
context)
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST,
context)
directionFieldName = self.parameterAsString(parameters,
self.DIRECTION_FIELD,
context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD,
context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD,
context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH,
context)
defaultDirection = self.parameterAsEnum(parameters,
self.DEFAULT_DIRECTION,
context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD,
context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED,
context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = startPoints.fields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network, directionField,
forwardValue, backwardValue,
bothValue, defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(
distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField, defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(), True, tolerance)
feedback.pushInfo(self.tr('Loading start points...'))
request = QgsFeatureRequest()
request.setDestinationCrs(network.sourceCrs())
features = startPoints.getFeatures(request)
total = 100.0 / startPoints.featureCount() if startPoints.featureCount(
) else 0
points = []
source_attributes = {}
i = 0
for current, f in enumerate(features):
if feedback.isCanceled():
break
if not f.hasGeometry():
continue
for p in f.geometry().vertices():
points.append(QgsPointXY(p))
source_attributes[i] = f.attributes()
i += 1
feedback.setProgress(int(current * total))
feedback.pushInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points, feedback)
feedback.pushInfo(self.tr('Calculating service areas...'))
graph = builder.graph()
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT,
context, fields,
QgsWkbTypes.MultiPoint,
network.sourceCrs())
vertices = []
upperBoundary = []
lowerBoundary = []
total = 100.0 / len(snappedPoints) if snappedPoints else 1
for i, p in enumerate(snappedPoints):
if feedback.isCanceled():
break
idxStart = graph.findVertex(snappedPoints[i])
origPoint = points[i].toString()
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
for j, v in enumerate(cost):
if v > travelCost and tree[j] != -1:
vertexId = graph.edge(tree[j]).fromVertex()
if cost[vertexId] <= travelCost:
vertices.append(j)
for j in vertices:
upperBoundary.append(
graph.vertex(graph.edge(tree[j]).toVertex()).point())
lowerBoundary.append(
graph.vertex(graph.edge(tree[j]).fromVertex()).point())
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
feat.setGeometry(geomUpper)
attrs = source_attributes[i]
attrs.extend(['upper', origPoint])
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
attrs[-2] = 'lower'
feat.setAttributes(attrs)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
vertices[:] = []
upperBoundary[:] = []
lowerBoundary[:] = []
feedback.setProgress(int(i * total))
return {self.OUTPUT: dest_id}
def processAlgorithm(self, progress):
layer = dataobjects.getObjectFromUri(
self.getParameterValue(self.INPUT_VECTOR))
startPoint = self.getParameterValue(self.START_POINT)
endPoints = dataobjects.getObjectFromUri(
self.getParameterValue(self.END_POINTS))
strategy = self.getParameterValue(self.STRATEGY)
directionFieldName = self.getParameterValue(self.DIRECTION_FIELD)
forwardValue = self.getParameterValue(self.VALUE_FORWARD)
backwardValue = self.getParameterValue(self.VALUE_BACKWARD)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
bothValue = self.getParameterValue(self.VALUE_BOTH)
defaultDirection = self.getParameterValue(self.DEFAULT_DIRECTION)
speedFieldName = self.getParameterValue(self.SPEED_FIELD)
defaultSpeed = self.getParameterValue(self.DEFAULT_SPEED)
tolerance = self.getParameterValue(self.TOLERANCE)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
feat = QgsFeature()
feat.setFields(fields)
writer = self.getOutputFromName(
self.OUTPUT_LAYER).getVectorWriter(
fields.toList(),
QgsWkbTypes.LineString,
layer.crs())
tmp = startPoint.split(',')
startPoint = QgsPoint(float(tmp[0]), float(tmp[1]))
directionField = -1
if directionFieldName is not None:
directionField = layer.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName is not None:
speedField = layer.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(layer,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = iface.mapCanvas().mapSettings().destinationCrs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(iface.mapCanvas().mapSettings().destinationCrs(),
iface.mapCanvas().hasCrsTransformEnabled(),
tolerance)
progress.setInfo(self.tr('Loading end points...'))
request = QgsFeatureRequest()
request.setFlags(request.flags() ^ QgsFeatureRequest.SubsetOfAttributes)
features = vector.features(endPoints, request)
count = len(features)
points = [startPoint]
for f in features:
points.append(f.geometry().asPoint())
progress.setInfo(self.tr('Building graph...'))
snappedPoints = director.makeGraph(builder, points)
progress.setInfo(self.tr('Calculating shortest paths...'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
route = []
total = 100.0 / count
for i in range(1, count + 1):
idxEnd = graph.findVertex(snappedPoints[i])
if tree[idxEnd] == -1:
msg = self.tr('There is no route from start point ({}) to end point ({}).'.format(startPoint.toString(), points[i].toString()))
progress.setText(msg)
ProcessingLog.addToLog(ProcessingLog.LOG_WARNING, msg)
continue
cost = 0.0
current = idxEnd
while current != idxStart:
cost += graph.edge(tree[current]).cost(0)
route.append(graph.vertex(graph.edge(tree[current]).inVertex()).point())
current = graph.edge(tree[current]).outVertex()
route.append(snappedPoints[0])
route.reverse()
geom = QgsGeometry.fromPolyline(route)
feat.setGeometry(geom)
feat['start'] = startPoint.toString()
feat['end'] = points[i].toString()
feat['cost'] = cost / multiplier
writer.addFeature(feat)
route[:] = []
progress.setPercentage(int(i * total))
del writer
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT))
startPoint = self.parameterAsPoint(parameters, self.START_POINT, context, network.sourceCrs())
endPoint = self.parameterAsPoint(parameters, self.END_POINT, context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
fields = QgsFields()
fields.append(QgsField('start', QVariant.String, '', 254, 0))
fields.append(QgsField('end', QVariant.String, '', 254, 0))
fields.append(QgsField('cost', QVariant.Double, '', 20, 7))
(sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.LineString, network.sourceCrs())
if sink is None:
raise QgsProcessingException(self.invalidSinkError(parameters, self.OUTPUT))
directionField = -1
if directionField:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
multiplier = 3600
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Building graph…'))
snappedPoints = director.makeGraph(builder, [startPoint, endPoint], feedback)
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Calculating shortest path…'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
idxEnd = graph.findVertex(snappedPoints[1])
tree, costs = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
if tree[idxEnd] == -1:
raise QgsProcessingException(
self.tr('There is no route from start point to end point.'))
route = [graph.vertex(idxEnd).point()]
cost = costs[idxEnd]
current = idxEnd
while current != idxStart:
current = graph.edge(tree[current]).fromVertex()
route.append(graph.vertex(current).point())
route.reverse()
feedback.pushInfo(QCoreApplication.translate('ShortestPathPointToPoint', 'Writing results…'))
geom = QgsGeometry.fromPolylineXY(route)
feat = QgsFeature()
feat.setFields(fields)
feat['start'] = startPoint.toString()
feat['end'] = endPoint.toString()
feat['cost'] = cost / multiplier
feat.setGeometry(geom)
sink.addFeature(feat, QgsFeatureSink.FastInsert)
results = {}
results[self.TRAVEL_COST] = cost / multiplier
results[self.OUTPUT] = dest_id
return results
def processAlgorithm(self, parameters, context, feedback):
network = self.parameterAsSource(parameters, self.INPUT, context)
if network is None:
raise QgsProcessingException(self.invalidSourceError(parameters, self.INPUT))
startPoint = self.parameterAsPoint(parameters, self.START_POINT, context, network.sourceCrs())
strategy = self.parameterAsEnum(parameters, self.STRATEGY, context)
travelCost = self.parameterAsDouble(parameters, self.TRAVEL_COST, context)
directionFieldName = self.parameterAsString(parameters, self.DIRECTION_FIELD, context)
forwardValue = self.parameterAsString(parameters, self.VALUE_FORWARD, context)
backwardValue = self.parameterAsString(parameters, self.VALUE_BACKWARD, context)
bothValue = self.parameterAsString(parameters, self.VALUE_BOTH, context)
defaultDirection = self.parameterAsEnum(parameters, self.DEFAULT_DIRECTION, context)
speedFieldName = self.parameterAsString(parameters, self.SPEED_FIELD, context)
defaultSpeed = self.parameterAsDouble(parameters, self.DEFAULT_SPEED, context)
tolerance = self.parameterAsDouble(parameters, self.TOLERANCE, context)
include_bounds = True # default to true to maintain 3.0 API
if self.INCLUDE_BOUNDS in parameters:
include_bounds = self.parameterAsBool(parameters, self.INCLUDE_BOUNDS, context)
directionField = -1
if directionFieldName:
directionField = network.fields().lookupField(directionFieldName)
speedField = -1
if speedFieldName:
speedField = network.fields().lookupField(speedFieldName)
director = QgsVectorLayerDirector(network,
directionField,
forwardValue,
backwardValue,
bothValue,
defaultDirection)
distUnit = context.project().crs().mapUnits()
multiplier = QgsUnitTypes.fromUnitToUnitFactor(distUnit, QgsUnitTypes.DistanceMeters)
if strategy == 0:
strategy = QgsNetworkDistanceStrategy()
else:
strategy = QgsNetworkSpeedStrategy(speedField,
defaultSpeed,
multiplier * 1000.0 / 3600.0)
director.addStrategy(strategy)
builder = QgsGraphBuilder(network.sourceCrs(),
True,
tolerance)
feedback.pushInfo(QCoreApplication.translate('ServiceAreaFromPoint', 'Building graph…'))
snappedPoints = director.makeGraph(builder, [startPoint], feedback)
feedback.pushInfo(QCoreApplication.translate('ServiceAreaFromPoint', 'Calculating service area…'))
graph = builder.graph()
idxStart = graph.findVertex(snappedPoints[0])
tree, cost = QgsGraphAnalyzer.dijkstra(graph, idxStart, 0)
vertices = set()
points = []
lines = []
for vertex, start_vertex_cost in enumerate(cost):
inbound_edge_index = tree[vertex]
if inbound_edge_index == -1 and vertex != idxStart:
# unreachable vertex
continue
if start_vertex_cost > travelCost:
# vertex is too expensive, discard
continue
vertices.add(vertex)
start_point = graph.vertex(vertex).point()
# find all edges coming from this vertex
for edge_id in graph.vertex(vertex).outgoingEdges():
edge = graph.edge(edge_id)
end_vertex_cost = start_vertex_cost + edge.cost(0)
end_point = graph.vertex(edge.toVertex()).point()
if end_vertex_cost <= travelCost:
# end vertex is cheap enough to include
vertices.add(edge.toVertex())
lines.append([start_point, end_point])
else:
# travelCost sits somewhere on this edge, interpolate position
interpolated_end_point = QgsGeometryUtils.interpolatePointOnLineByValue(start_point.x(), start_point.y(), start_vertex_cost,
end_point.x(), end_point.y(), end_vertex_cost, travelCost)
points.append(interpolated_end_point)
lines.append([start_point, interpolated_end_point])
for i in vertices:
points.append(graph.vertex(i).point())
feedback.pushInfo(QCoreApplication.translate('ServiceAreaFromPoint', 'Writing results…'))
fields = QgsFields()
fields.append(QgsField('type', QVariant.String, '', 254, 0))
fields.append(QgsField('start', QVariant.String, '', 254, 0))
feat = QgsFeature()
feat.setFields(fields)
(point_sink, dest_id) = self.parameterAsSink(parameters, self.OUTPUT, context,
fields, QgsWkbTypes.MultiPoint, network.sourceCrs())
results = {}
if point_sink is not None:
results[self.OUTPUT] = dest_id
geomPoints = QgsGeometry.fromMultiPointXY(points)
feat.setGeometry(geomPoints)
feat['type'] = 'within'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
if include_bounds:
upperBoundary = []
lowerBoundary = []
vertices = []
for i, v in enumerate(cost):
if v > travelCost and tree[i] != -1:
vertexId = graph.edge(tree[i]).fromVertex()
if cost[vertexId] <= travelCost:
vertices.append(i)
for i in vertices:
upperBoundary.append(graph.vertex(graph.edge(tree[i]).toVertex()).point())
lowerBoundary.append(graph.vertex(graph.edge(tree[i]).fromVertex()).point())
geomUpper = QgsGeometry.fromMultiPointXY(upperBoundary)
geomLower = QgsGeometry.fromMultiPointXY(lowerBoundary)
feat.setGeometry(geomUpper)
feat['type'] = 'upper'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
feat.setGeometry(geomLower)
feat['type'] = 'lower'
feat['start'] = startPoint.toString()
point_sink.addFeature(feat, QgsFeatureSink.FastInsert)
(line_sink, line_dest_id) = self.parameterAsSink(parameters, self.OUTPUT_LINES, context,
fields, QgsWkbTypes.MultiLineString, network.sourceCrs())
if line_sink is not None:
results[self.OUTPUT_LINES] = line_dest_id
geom_lines = QgsGeometry.fromMultiPolylineXY(lines)
feat.setGeometry(geom_lines)
feat['type'] = 'lines'
feat['start'] = startPoint.toString()
line_sink.addFeature(feat, QgsFeatureSink.FastInsert)
return results
def graph_analysis(self, graph, tied_origins, distances):
# Settings
catchment_threshold = max(distances)
# Variables
catchment_network = {}
catchment_points = {}
# Loop through graph and get geometry and write to catchment network
for index in range(graph.edgeCount()):
inVertexId = graph.edge(index).fromVertex()
outVertexId = graph.edge(index).toVertex()
inVertexGeom = graph.vertex(inVertexId).point()
outVertexGeom = graph.vertex(outVertexId).point()
# only include one of the two possible arcs
if inVertexId < outVertexId:
arcGeom = QgsGeometry.fromPolylineXY(
[inVertexGeom, outVertexGeom])
catchment_network[index] = {
'geom': arcGeom,
'start': inVertexId,
'end': outVertexId,
'cost': {}
}
# Loop through tied origins and write origin names
for tied_point, origin in enumerate(tied_origins):
origin_name = tied_origins[tied_point]['name']
catchment_points[tied_point] = {'name': origin_name}
catchment_points[tied_point].update(
{distance: []
for distance in distances})
# Loop through tied origins and write costs and polygon points
i = 1
for tied_point, origin in enumerate(tied_origins):
self.progress.emit(20 + int(20 * i / len(tied_origins)))
origin_name = tied_origins[tied_point]['name']
originVertexId = graph.findVertex(
tied_origins[tied_point]['vertex'])
# Run dijkstra and get tree and cost
(tree, cost) = QgsGraphAnalyzer.dijkstra(graph, originVertexId, 0)
# Loop through graph arcs
for index in catchment_network.keys():
if self.killed: break
# Define the arc properties
inVertexId = catchment_network[index]['start']
outVertexId = catchment_network[index]['end']
inVertexCost = cost[inVertexId]
outVertexCost = cost[outVertexId]
# this is the permissive option gives cost to the arc based on the closest point,
# it just needs to be reach by one node
arcCost = min(inVertexCost, outVertexCost)
# this is the restrictive option, gives cost to the arc based on the furtherst point,
# it needs to be entirely within distance
# arcCost = max(inVertexCost, outVertexCost)
# If arc is the origin set cost to 0
if outVertexId == originVertexId or inVertexId == originVertexId:
catchment_network[index]['cost'][origin_name] = 0
# If arc is connected and within the maximum radius set cost
elif arcCost <= catchment_threshold and tree[inVertexId] != -1:
if origin_name in catchment_network[index]['cost']:
if catchment_network[index]['cost'][origin_name] > int(
arcCost):
catchment_network[index]['cost'][
origin_name] = int(arcCost)
else:
catchment_network[index]['cost'][origin_name] = int(
arcCost)
# Add catchment points for each given radius
inVertexGeom = graph.vertex(inVertexId).point()
outVertexGeom = graph.vertex(outVertexId).point()
seg_length = catchment_network[index]['geom'].length(
) # math.sqrt(inVertexGeom.sqrDist(outVertexGeom))
for distance in distances:
if self.killed: break
# this option includes both nodes as long as arc is within distance
# the polygon is the same as the network output
# if arcCost <= distance:
# catchment_points[tied_point][distance].extend([inVertexGeom, outVertexGeom])
# this option only includes nodes within distance
# it does linear interpolation for extra points
if inVertexCost <= distance:
catchment_points[tied_point][distance].append(
inVertexGeom)
# add an extra point with linear referencing
if outVertexCost > distance:
target_dist = distance - inVertexCost
midVertexGeom = catchment_network[index][
'geom'].interpolate(target_dist).asPoint()
catchment_points[tied_point][distance].append(
midVertexGeom)
if outVertexCost <= distance:
catchment_points[tied_point][distance].append(
outVertexGeom)
# add an extra point with linear referencing
if inVertexCost > distance:
target_dist = distance - outVertexCost
midVertexGeom = catchment_network[index][
'geom'].interpolate(seg_length -
target_dist).asPoint()
catchment_points[tied_point][distance].append(
midVertexGeom)
i += 1
return catchment_network, catchment_points
