def test_Qtcm_object_field_default_values_on_init(self):
"""Test Qtcm object field values on initialization for full.
This test looks at Field attributes not tested above to
make sure that their values are initialized correctly. But
on the value in Field is tested, none of the other attributes
of Field. Set compiled_form to 'full' and 'parts'.
"""
for iform in ['full', 'parts']:
model = Qtcm(compiled_form=iform)
self.failUnless(self.N.allclose(model.it.value, 1))
self.failUnless(self.N.allclose(model.interval.value, 1))
self.failUnless(self.N.allclose(model.noout.value, 0))
self.failUnless(self.N.allclose(model.nooutr.value, 0))
self.failUnless(self.N.allclose(model.ntout.value, -30))
self.failUnless(self.N.allclose(model.ntouti.value, 0))
self.failUnless(self.N.allclose(model.ntoutr.value, 0))
self.failUnless(self.N.allclose(model.mrestart.value, 0))
self.failUnless(self.N.allclose(model.mt0.value, 1))
self.failUnless(self.N.allclose(model.ziml.value, 500))
self.failUnless(self.N.allclose(model.weml.value, 0.01))
self.failUnless(self.N.allclose(model.VVsmin.value, 4.5))
self.failUnless(self.N.allclose(model.viscxu0.value, 7e5))
self.failUnless(self.N.allclose(model.viscyu0.value, 7e5))
self.failUnless(self.N.allclose(model.visc4x.value, 7e5))
self.failUnless(self.N.allclose(model.visc4y.value, 7e5))
self.failUnless(self.N.allclose(model.viscxu1.value, 7e5))
self.failUnless(self.N.allclose(model.viscyu1.value, 7e5))
self.failUnless(self.N.allclose(model.viscxT.value, 12e5))
self.failUnless(self.N.allclose(model.viscyT.value, 12e5))
self.failUnless(self.N.allclose(model.viscxq.value, 12e5))
self.failUnless(self.N.allclose(model.viscyq.value, 12e5))
def test_Qtcm_object_init_keywords_read(self):
"""Test Qtcm object reads instantiation keywords correctly.
Test done only for a few cases. Set compiled_form to 'full'
and 'parts'.
"""
for iform in ['full', 'parts']:
inputs = {}
inputs['dt'] = 600.
inputs['eps_c'] = 0.15
inputs['compiled_form'] = iform
model = Qtcm(**inputs)
self.failUnlessEqual(model.dt.id, 'dt')
self.failUnlessEqual(model.dt.value, 600.)
self.failUnlessEqual(model.eps_c.id, 'eps_c')
self.failUnlessEqual(model.eps_c.value, 0.15)
def test_exceptions(self):
"""Test some exceptions.
"""
#- Test the case where compiled_form is missing raises an
# error:
model = Qtcm(compiled_form='parts')
delattr(model, 'compiled_form')
self.failUnlessRaises(ValueError, model.__init__)
#- Test that varinit cannot be called in certain cases:
model = Qtcm(compiled_form='full')
self.failUnlessRaises(AttributeError, model.varinit)
model = Qtcm(compiled_form='parts')
model._cont = True
self.failUnlessRaises(qtcm.qtcm.FieldNotReadableFromCompiledModel,
model.varinit)
#- Test that arrays are not initialized on instantiation, but
# rather in a run session (do case with no timesteps):
model = Qtcm(compiled_form='parts')
for ikey in defaults.qtcm_fields_ids:
if not self.isscalar(defaults.qtcm_fields[ikey]['value']):
self.failUnlessRaises(AttributeError, getattr, model, ikey)
rundirname = 'test'
dirbasepath = utilities.prepare_outdir(rundirname)
model.outdir.value = dirbasepath
model.runname.value = rundirname
model.bnddir.value = os.path.join( os.getcwd(), 'bnddir', 'r64x42' )
model.SSTdir.value = \
os.path.join( os.getcwd(), 'bnddir', 'r64x42', 'SST_Reynolds' )
model.lastday.value = 0
model.run_session()
for ikey in defaults.qtcm_fields_ids:
if not self.isscalar(defaults.qtcm_fields[ikey]['value']):
self.failUnless( hasattr(model, ikey) )
if os.path.exists(dirbasepath): shutil.rmtree(dirbasepath)
if os.path.exists('qtcm_00010101.restart'):
os.remove('qtcm_00010101.restart')
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'parts'
model1 = Qtcm(**inputs)
model1.run_session()
if os.path.exists('qtcm_00011115.restart'): os.remove('qtcm_00011115.restart')
#- Aqua Run 2: Make test run directory if it doesn't exist. Delete
# old proc and log files as needed, set inputs dictionary, and run:
rundirname = 'full_365_aqua_multi2'
dirbasepath = prepare_outdir(rundirname)
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
model2 = Qtcm(**inputs)
model2.run_session()
if os.path.exists('qtcm_00011115.restart'): os.remove('qtcm_00011115.restart')
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'parts'
model1 = Qtcm(**inputs)
model1.run_session()
if os.path.exists('qtcm_00011115.restart'): os.remove('qtcm_00011115.restart')
#- Aqua Run 2: Make test run directory if it doesn't exist. Delete
# old proc and log files as needed, set inputs dictionary, and run:
rundirname = 'parts_365_aqua_multi2'
dirbasepath = prepare_outdir(rundirname)
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
model2 = Qtcm(**inputs)
model2.run_session()
inputs['SSTdir'] = os.path.join(os.getcwd(), 'bnddir', 'r64x42',
'SST_Reynolds')
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'full'
model = Qtcm(**inputs)
model.run_session()
# model.plotm('Qc',lat=[-40,40], time=58, lon=[0.,],
# fn=os.path.join(dirbasepath, 'plotm1.png'))
model.plotm('FLWut',
lat=[-40, 40],
time=12,
filled=0,
fn=os.path.join(dirbasepath, 'plotm2.png'))
# model.plotm('Ts',lon=[20,300], time=50, approx_nlev=5,
# fn=os.path.join(dirbasepath, 'plotm3.png'))
# model.plotm('Qc',time=4, tmppreview=True)
# model.plotm('Qc',lon=[20,100], time=[0,4]) #@@@should give error
# model.plotm('Qc',lat=5.625, lon=[20,100], time=[0,4])
# model.plotm('Qc',lat=[-20, 50], lon=247.5, time=[30,50],
# in two passes (10 and 30 days), using restart:
rundirname = 'full_365_landon_cont10-30_10'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['compiled_form'] = 'full'
model = Qtcm(**inputs1)
model.run_session()
del model
os.rename( os.path.join(os.getcwd(), 'qtcm_00011110.restart'),
os.path.join(os.getcwd(), 'qtcm.restart') )
rundirname = 'full_365_landon_cont10-30_30'
dirbasepath = prepare_outdir(rundirname)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = -1
inputs1['month0'] = -1
inputs1['day0'] = -1
inputs1['lastday'] = 30
inputs1['mrestart'] = 1
#- Run:
inputs = {}
inputs['dt'] = 1200.
inputs['title'] = 'QTCM spinup part 1 test (aquaplanet)'
inputs['bnddir'] = os.path.join(os.getcwd(), 'bnddir', 'r64x42')
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 1
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 800
inputs['ntout'] = 30
inputs['ntouti'] = 30
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'parts'
model = Qtcm(**inputs)
model.run_session()
del model
if os.path.exists('qtcm_00040109.restart'):
os.remove('qtcm_00040109.restart')
# ====== end file ======
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42',
'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 60
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'full'
model = Qtcm(**inputs)
model.run_session()
# model.plotm('Qc',lat=[-40,40], time=58, lon=[0.,],
# fn=os.path.join(dirbasepath, 'plotm1.png'))
model.plotm('FLWut',lat=[-40,40], time=52,
fn=os.path.join(dirbasepath, 'plotm2.png'))
# model.plotm('Ts',lon=[20,300], time=50, approx_nlev=5,
# fn=os.path.join(dirbasepath, 'plotm3.png'))
# model.plotm('Qc',time=4, tmppreview=True)
# model.plotm('Qc',lon=[20,100], time=[0,4]) #@@@should give error
# model.plotm('Qc',lat=5.625, lon=[20,100], time=[0,4])
# model.plotm('Qc',lat=[-20, 50], lon=247.5, time=[30,50],
# fn=os.path.join(dirbasepath, 'plotm4.png'))
# model.plotm('us', time=52,
# fn=os.path.join(dirbasepath, 'plotm5.png'))
def test_Qtcm_object_field_default_on_init(self):
"""Test Qtcm object field attributes on init.
This test looks a number of Field attributes for a host of
QTCM fields initialized when the Qtcm instance is initialized.
It does not test all those default attributes, but for the
ones it tests, it tests all the Field attributes that describe
that QTCM field. In the next test, the fields that are not in
this test are tested, but only for the correct value. Set
compiled_form to 'full' and 'parts'.
"""
for iform in ['full', 'parts']:
model = Qtcm(compiled_form=iform)
self.failUnless(self.N.allclose(model.dt.value, 1200.))
self.failUnlessEqual(model.dt.id, 'dt')
self.failUnlessEqual(model.dt.units, 's')
self.failUnlessEqual(model.dt.long_name, 'time step')
self.failUnless(self.N.allclose(model.eps_c.value, 0.13888889E-03))
self.failUnlessEqual(model.eps_c.id, 'eps_c')
self.failUnlessEqual(model.eps_c.units, '1/s')
self.failUnlessEqual(model.eps_c.long_name, '1/tau_c NZ (5.7)')
self.failUnlessEqual(model.title.value, 'QTCM default title')
self.failUnlessEqual(model.title.id, 'title')
self.failUnlessEqual(model.title.units, '')
self.failUnlessEqual(model.title.long_name, 'a descriptive title')
self.failUnlessEqual(model.bnddir.value,
os.path.join(os.pardir, 'bnddata'))
self.failUnlessEqual(model.bnddir.id, 'bnddir')
self.failUnlessEqual(model.bnddir.units, '')
self.failUnlessEqual(model.bnddir.long_name,
'boundary data other than SST')
self.failUnlessEqual(
model.SSTdir.value,
os.path.join(os.pardir, 'bnddata', 'SST_Reynolds'))
self.failUnlessEqual(model.SSTdir.id, 'SSTdir')
self.failUnlessEqual(model.SSTdir.units, '')
self.failUnlessEqual(model.SSTdir.long_name, 'where SST files are')
self.failUnlessEqual(
model.outdir.value,
os.path.join(os.pardir, 'proc', 'qtcm_output'))
self.failUnlessEqual(model.outdir.id, 'outdir')
self.failUnlessEqual(model.outdir.units, '')
self.failUnlessEqual(model.outdir.long_name,
'where output goes to')
self.failUnlessEqual(model.runname.value, 'runname')
self.failUnlessEqual(model.runname.id, 'runname')
self.failUnlessEqual(model.runname.units, '')
self.failUnlessEqual(model.runname.long_name,
'string for an output filename')
self.failUnlessEqual(model.landon.value, 1)
self.failUnlessEqual(model.landon.id, 'landon')
self.failUnlessEqual(model.landon.units, '')
self.failUnlessEqual(model.landon.long_name,
'if not 1: land = ocean with fake SST')
self.failUnlessEqual(model.SSTmode.value, 'seasonal')
self.failUnlessEqual(model.SSTmode.id, 'SSTmode')
self.failUnlessEqual(model.SSTmode.units, '')
self.failUnlessEqual(model.SSTmode.long_name,
'decide what kind of SST to use')
self.failUnlessEqual(model.year0.value, 0)
self.failUnlessEqual(model.year0.id, 'year0')
self.failUnlessEqual(model.year0.units, 'yr')
self.failUnlessEqual(model.year0.long_name,
'starting year; if < 0 use year in restart')
self.failUnlessEqual(model.month0.value, -1)
self.failUnlessEqual(model.month0.id, 'month0')
self.failUnlessEqual(model.month0.units, 'mo')
self.failUnlessEqual(model.month0.long_name,
'starting month; if < 0 use mo in restart')
self.failUnlessEqual(model.day0.value, -1)
self.failUnlessEqual(model.day0.id, 'day0')
self.failUnlessEqual(model.day0.units, 'dy')
self.failUnlessEqual(model.day0.long_name,
'starting day; if < 0 use day in restart')
self.failUnlessEqual(model.lastday.value, 365)
self.failUnlessEqual(model.lastday.id, 'lastday')
self.failUnlessEqual(model.lastday.units, 'dy')
self.failUnlessEqual(model.lastday.long_name,
'last day of integration')
self.failUnlessEqual(model.dateofmodel.value, 0)
self.failUnlessEqual(model.dateofmodel.id, 'dateofmodel')
self.failUnlessEqual(model.dateofmodel.units, '')
self.failUnlessEqual(
model.dateofmodel.long_name,
'date of model coded as an integer as yyyymmdd')
def test_exceptions(self):
"""Test some exceptions.
"""
#- Test the case where compiled_form is missing raises an
# error:
model = Qtcm(compiled_form='parts')
delattr(model, 'compiled_form')
self.failUnlessRaises(ValueError, model.__init__)
#- Test that varinit cannot be called in certain cases:
model = Qtcm(compiled_form='full')
self.failUnlessRaises(AttributeError, model.varinit)
model = Qtcm(compiled_form='parts')
model._cont = True
self.failUnlessRaises(qtcm.qtcm.FieldNotReadableFromCompiledModel,
model.varinit)
#- Test that arrays are not initialized on instantiation, but
# rather in a run session (do case with no timesteps):
model = Qtcm(compiled_form='parts')
for ikey in defaults.qtcm_fields_ids:
if not self.isscalar(defaults.qtcm_fields[ikey]['value']):
self.failUnlessRaises(AttributeError, getattr, model, ikey)
rundirname = 'test'
dirbasepath = utilities.prepare_outdir(rundirname)
model.outdir.value = dirbasepath
model.runname.value = rundirname
model.bnddir.value = os.path.join(os.getcwd(), 'bnddir', 'r64x42')
model.SSTdir.value = \
os.path.join( os.getcwd(), 'bnddir', 'r64x42', 'SST_Reynolds' )
model.lastday.value = 0
model.run_session()
for ikey in defaults.qtcm_fields_ids:
if not self.isscalar(defaults.qtcm_fields[ikey]['value']):
self.failUnless(hasattr(model, ikey))
if os.path.exists(dirbasepath): shutil.rmtree(dirbasepath)
if os.path.exists('qtcm_00010101.restart'):
os.remove('qtcm_00010101.restart')
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'full'
model = Qtcm(**inputs)
model.run_session()
#model.plotm('Qc',lat=[-40,40], time=4, lon=[0.,])
#model.plotm('Qc',lat=[-40,40], time=4)
model.plotm('Qc',lon=[20,300], time=4, approx_nlev=4, tmppreview=True)
#model.plotm('Qc',time=4, tmppreview=True)
#model.plotm('Qc',lon=[20,100], time=[0,4]) #@@@should give error
#model.plotm('Qc',lat=5.625, lon=[20,100], time=[0,4])
#model.plotm('Qc',lat=[-5.625, 50], lon=247.5, time=[0,4])
if os.path.exists('qtcm_00011115.restart'): os.remove('qtcm_00011115.restart')
# ====== end file ======
rundirname = 'parts_365_aqua_nr1_cont'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['init_with_instance_state'] = True
inputs1['compiled_form'] = 'parts'
model = Qtcm(**inputs1)
model.run_session()
snapshot = model.snapshot
if os.path.exists('qtcm_00011110.restart'): os.remove('qtcm_00011110.restart')
model.run_session(cont=30)
del model
#why is this incorrect? why when you do a continuation run for another
# run session do you not get the same results as the 30 day run
# from case 3? even if you don't write the same file. the remove thing
# didn't work. what if i try with snapshot once more? it doesn't work
# because i hvaen't assigned a new qtcm compiled module? put that
# into run_session? @@@add this note re compiled model to manual
# in two passes (10 and 30 days), using restart:
rundirname = 'full_365_aqua_cont10-30_10'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['compiled_form'] = 'full'
model = Qtcm(**inputs1)
model.run_session()
del model
os.rename(os.path.join(os.getcwd(), 'qtcm_00011110.restart'),
os.path.join(os.getcwd(), 'qtcm.restart'))
rundirname = 'full_365_aqua_cont10-30_30'
dirbasepath = prepare_outdir(rundirname)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = -1
inputs1['month0'] = -1
inputs1['day0'] = -1
inputs1['lastday'] = 30
inputs1['mrestart'] = 1
def _gen_plots():
"""Generate plots for manual comparison.
This method only works with numpy.
"""
import numpy as N
rundirname = 'plotm_test'
dirbasepath = utilities.prepare_outdir(rundirname)
inputs = {}
inputs['dt'] = 1200.
inputs['title'] = 'QTCM spinup part 1 test (aquaplanet)'
inputs['bnddir'] = os.path.join(os.getcwd(), 'bnddir', 'r64x42')
inputs['SSTdir'] = os.path.join(os.getcwd(), 'bnddir', 'r64x42',
'SST_Reynolds')
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 60
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'full'
model = Qtcm(**inputs)
model.run_session()
model.plotm('Qc',
lat=[-40, 40],
time=58,
lon=[
0.,
],
fn=os.path.join(dirbasepath, 'plotm1.png'))
model.plotm('FLWut',
lat=[-40, 40],
time=52,
fn=os.path.join(dirbasepath, 'plotm2.png'))
model.plotm('Ts',
lon=[20, 300],
time=50,
approx_nlev=15,
fn=os.path.join(dirbasepath, 'plotm3.png'))
model.plotm('Qc',
lat=[-20, 50],
lon=247.5,
time=[30, 50],
fn=os.path.join(dirbasepath, 'plotm4.png'))
model.plotm('us', time=52, fn=os.path.join(dirbasepath, 'plotm5.png'))
model.plotm('Qc',
lat=5.625,
lon=[50, 200],
time=[20, 50],
fn=os.path.join(dirbasepath, 'plotm6.png'))
model.plotm('q1',
lat=5.625,
lon=112.5,
time=[20, 50],
fn=os.path.join(dirbasepath, 'plotm7.png'))
model.plotm('vs',
time=50,
levels=N.arange(-10, 12, 2),
fn=os.path.join(dirbasepath, 'plotm8.png'))
model.plotm('Qc',
lat=5.625,
lon=[50, 200],
time=[20, 50],
levels=N.arange(-20, 320, 20),
fn=os.path.join(dirbasepath, 'plotm9.png'))
model.plotm('Qc',
lat=[-40, 40],
time=58,
lon=[
0.,
],
filled=1,
fn=os.path.join(dirbasepath, 'plotm1a.png'))
model.plotm('FLWut',
lat=[-40, 40],
time=52,
filled=1,
fn=os.path.join(dirbasepath, 'plotm2a.png'))
model.plotm('Ts',
lon=[20, 300],
time=50,
approx_nlev=15,
filled=1,
fn=os.path.join(dirbasepath, 'plotm3a.png'))
model.plotm('Qc',
lat=[-20, 50],
lon=247.5,
time=[30, 50],
filled=1,
fn=os.path.join(dirbasepath, 'plotm4a.png'))
model.plotm('us',
time=52,
filled=1,
fn=os.path.join(dirbasepath, 'plotm5a.png'))
model.plotm('Qc',
lat=5.625,
lon=[50, 200],
time=[20, 50],
filled=True,
fn=os.path.join(dirbasepath, 'plotm6a.png'))
model.plotm('vs',
time=50,
levels=N.arange(-10, 12, 2),
filled=True,
fn=os.path.join(dirbasepath, 'plotm8a.png'))
model.plotm('Qc',
lat=5.625,
lon=[50, 200],
time=[20, 50],
levels=N.arange(-20, 320, 20),
filled=True,
fn=os.path.join(dirbasepath, 'plotm9a.png'))
if os.path.exists('qtcm_00011115.restart'):
os.remove('qtcm_00011115.restart')
def test_Qtcm_object_set_and_get_items_from_compiled(self):
"""Test Qtcm set_qtcm_item and get_qtcm_item methods together.
Also tests the set_qtcm1_item and get_qtcm1_item methods, which
should behave identically to set_qtcm_item and get_qtcm_item.
Only scalar parameters are tested.
"""
for iform in ['full', 'parts']:
model = Qtcm(compiled_form=iform)
model.set_qtcm_item('dt', 2400.)
model.set_qtcm_item('bnddir', 'ooga booga')
model.set_qtcm_item('ntout', 120)
self.failUnless( self.N.allclose(model.get_qtcm_item('dt'), 2400.) )
self.failUnlessEqual( model.get_qtcm_item('bnddir'), 'ooga booga' )
self.failUnlessEqual( model.get_qtcm_item('ntout'), 120 )
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'dt', 400)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'dt', 'hi')
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'bnddir', 20)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'bnddir', 20.)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'ntout', 30.)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'ntout', 'hi')
del model
model = Qtcm(compiled_form=iform)
model.set_qtcm1_item('dt', 2400.)
model.set_qtcm1_item('bnddir', 'ooga booga')
model.set_qtcm1_item('ntout', 120)
self.failUnless( self.N.allclose(model.get_qtcm1_item('dt'),
2400.) )
self.failUnlessEqual( model.get_qtcm1_item('bnddir'), 'ooga booga' )
self.failUnlessEqual( model.get_qtcm1_item('ntout'), 120 )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'dt', 400 )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'dt', 'hi' )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'bnddir',
20 )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'bnddir',
20. )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'ntout',
30. )
self.failUnlessRaises( TypeError, model.set_qtcm1_item, 'ntout',
'hi' )
del model
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = os.path.join( os.getcwd(), 'rundir', 'full_365_aqua' )
inputs['runname'] = 'full_365_aqua'
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'parts'
model = Qtcm(**inputs)
start_time_f2py = time.time()
for i in xrange(1):
model.run_session()
print time.time() - start_time_f2py
if os.path.exists('qtcm_00011115.restart'): os.remove('qtcm_00011115.restart')
#- Delete old proc and log files and move old to aqua2:
#if os.path.exists(os.path.join(os.getcwd(),'rundir','full_365_aqua2')):
# shutil.rmtree(os.path.join(os.getcwd(),'rundir','full_365_aqua2'))
#shutil.copytree(os.path.join(os.getcwd(),'rundir','full_365_aqua'), \
# os.path.join(os.getcwd(),'rundir','full_365_aqua2'))
def test_Qtcm_object_set_and_get_items_from_compiled(self):
"""Test Qtcm set_qtcm_item and get_qtcm_item methods together.
Also tests the set_qtcm1_item and get_qtcm1_item methods, which
should behave identically to set_qtcm_item and get_qtcm_item.
Only scalar parameters are tested.
"""
for iform in ['full', 'parts']:
model = Qtcm(compiled_form=iform)
model.set_qtcm_item('dt', 2400.)
model.set_qtcm_item('bnddir', 'ooga booga')
model.set_qtcm_item('ntout', 120)
self.failUnless(self.N.allclose(model.get_qtcm_item('dt'), 2400.))
self.failUnlessEqual(model.get_qtcm_item('bnddir'), 'ooga booga')
self.failUnlessEqual(model.get_qtcm_item('ntout'), 120)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'dt', 400)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'dt', 'hi')
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'bnddir', 20)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'bnddir',
20.)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'ntout', 30.)
self.failUnlessRaises(TypeError, model.set_qtcm_item, 'ntout',
'hi')
del model
model = Qtcm(compiled_form=iform)
model.set_qtcm1_item('dt', 2400.)
model.set_qtcm1_item('bnddir', 'ooga booga')
model.set_qtcm1_item('ntout', 120)
self.failUnless(self.N.allclose(model.get_qtcm1_item('dt'), 2400.))
self.failUnlessEqual(model.get_qtcm1_item('bnddir'), 'ooga booga')
self.failUnlessEqual(model.get_qtcm1_item('ntout'), 120)
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'dt', 400)
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'dt', 'hi')
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'bnddir',
20)
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'bnddir',
20.)
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'ntout',
30.)
self.failUnlessRaises(TypeError, model.set_qtcm1_item, 'ntout',
'hi')
del model
# in two passes (10 and 30 days), using restart:
rundirname = 'full_365_aqua_cont10-30_10'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['compiled_form'] = 'full'
model = Qtcm(**inputs1)
model.run_session()
del model
os.rename( os.path.join(os.getcwd(), 'qtcm_00011110.restart'),
os.path.join(os.getcwd(), 'qtcm.restart') )
rundirname = 'full_365_aqua_cont10-30_30'
dirbasepath = prepare_outdir(rundirname)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = -1
inputs1['month0'] = -1
inputs1['day0'] = -1
inputs1['lastday'] = 30
inputs1['mrestart'] = 1
rundirname = 'parts_365_aqua_nr1_cont'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['init_with_instance_state'] = True
inputs1['compiled_form'] = 'parts'
model = Qtcm(**inputs1)
model.run_session()
snapshot = model.snapshot
if os.path.exists('qtcm_00011110.restart'): os.remove('qtcm_00011110.restart')
model.run_session(cont=30)
del model
#why is this incorrect? why when you do a continuation run for another
# run session do you not get the same results as the 30 day run
# from case 3? even if you don't write the same file. the remove thing
# didn't work. what if i try with snapshot once more? it doesn't work
# because i hvaen't assigned a new qtcm compiled module? put that
# into run_session? @@@add this note re compiled model to manual
inputs['title'] = 'QTCM spinup part 1 test (aquaplanet)'
inputs['bnddir'] = os.path.join(os.getcwd(), 'bnddir', 'r64x42')
inputs['SSTdir'] = os.path.join( os.getcwd(), 'bnddir', 'r64x42' \
, 'SST_Reynolds' )
inputs['outdir'] = dirbasepath
inputs['runname'] = rundirname
inputs['landon'] = 0
inputs['year0'] = 1
inputs['month0'] = 11
inputs['day0'] = 1
inputs['lastday'] = 15
inputs['ntout'] = 1
inputs['ntouti'] = 1
inputs['noout'] = 0
inputs['mrestart'] = 0
inputs['compiled_form'] = 'full'
model = Qtcm(**inputs)
model.run_session()
#model.plotm('Qc',lat=[-40,40], time=4, lon=[0.,])
#model.plotm('Qc',lat=[-40,40], time=4)
model.plotm('Qc', lon=[20, 300], time=4, approx_nlev=4, tmppreview=True)
#model.plotm('Qc',time=4, tmppreview=True)
#model.plotm('Qc',lon=[20,100], time=[0,4]) #@@@should give error
#model.plotm('Qc',lat=5.625, lon=[20,100], time=[0,4])
#model.plotm('Qc',lat=[-5.625, 50], lon=247.5, time=[0,4])
if os.path.exists('qtcm_00011115.restart'):
os.remove('qtcm_00011115.restart')
# ====== end file ======
# in two passes (10 and 30 days), using restart:
rundirname = 'full_365_landon_cont10-30_10'
dirbasepath = prepare_outdir(rundirname)
inputs1 = copy.deepcopy(inputs)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = 1
inputs1['month0'] = 11
inputs1['day0'] = 1
inputs1['lastday'] = 10
inputs1['mrestart'] = 0
inputs1['compiled_form'] = 'full'
model = Qtcm(**inputs1)
model.run_session()
del model
os.rename(os.path.join(os.getcwd(), 'qtcm_00011110.restart'),
os.path.join(os.getcwd(), 'qtcm.restart'))
rundirname = 'full_365_landon_cont10-30_30'
dirbasepath = prepare_outdir(rundirname)
inputs1['outdir'] = dirbasepath
inputs1['runname'] = rundirname
inputs1['year0'] = -1
inputs1['month0'] = -1
inputs1['day0'] = -1
inputs1['lastday'] = 30
inputs1['mrestart'] = 1
