def test_unitary_exceptions() -> None:
tensor = qf.CNot(1, 0).tensor
with pytest.raises(ValueError):
qf.Unitary(tensor, [0])
with pytest.raises(ValueError):
qf.Unitary(tensor, [0, 1, 2])
def test_stdgates(gatet: Type[qf.StdGate]) -> None:
# Test creation
gate = _randomize_gate(gatet)
# Test correct number of qubits
assert gate.qubit_nb == gatet.cv_qubit_nb
# Test hermitian conjugate
inv_gate = gate.H
gate.tensor
inv_gate.tensor
# Test inverse
eye = gate @ inv_gate
assert qf.gates_close(qf.IdentityGate(range(gate.qubit_nb)), eye)
assert qf.gates_phase_close(qf.IdentityGate(range(gate.qubit_nb)), eye)
# Test pow
assert qf.gates_close(gate ** -1, inv_gate)
assert qf.gates_close((gate ** 0.5) ** 2, gate)
assert qf.gates_close((gate ** 0.3) @ (gate ** 0.7), gate)
hgate = qf.Unitary((gate ** 0.5).tensor, gate.qubits)
assert qf.gates_close(hgate @ hgate, gate)
def test_gate_evolve(gatet: Type[qf.StdGate]) -> None:
gate0 = _randomize_gate(gatet)
gate1 = qf.Unitary(gate0.tensor, gate0.qubits)
rho = qf.random_density(gate0.qubits)
rho0 = gate0.evolve(rho)
rho1 = gate1.evolve(rho)
assert qf.densities_close(rho0, rho1)
def test_gate_run(gatet: Type[qf.StdGate]) -> None:
gate0 = _randomize_gate(gatet)
gate1 = qf.Unitary(gate0.tensor, gate0.qubits)
ket = qf.random_state(gate0.qubits)
ket0 = gate0.run(ket)
ket1 = gate1.run(ket)
assert qf.states_close(ket0, ket1)
def test_circuit_to_qutip() -> None:
q0, q1, q2 = 0, 1, 2
circ0 = qf.Circuit()
circ0 += qf.I(q0)
circ0 += qf.Ph(0.1, q0)
circ0 += qf.X(q0)
circ0 += qf.Y(q1)
circ0 += qf.Z(q0)
circ0 += qf.S(q1)
circ0 += qf.T(q2)
circ0 += qf.H(q0)
circ0 += qf.H(q1)
circ0 += qf.H(q2)
circ0 += qf.CNot(q0, q1)
circ0 += qf.CNot(q1, q0)
circ0 += qf.Swap(q0, q1)
circ0 += qf.ISwap(q0, q1)
circ0 += qf.CCNot(q0, q1, q2)
circ0 += qf.CSwap(q0, q1, q2)
circ0 == qf.I(q0)
circ0 += qf.Rx(0.1, q0)
circ0 += qf.Ry(0.2, q1)
circ0 += qf.Rz(0.3, q2)
circ0 += qf.V(q0)
circ0 += qf.H(q1)
circ0 += qf.CY(q0, q1)
circ0 += qf.CZ(q0, q1)
circ0 += qf.CS(q1, q2)
circ0 += qf.CT(q0, q1)
circ0 += qf.SqrtSwap(q0, q1)
circ0 += qf.SqrtISwap(q0, q1)
circ0 += qf.CCNot(q0, q1, q2)
circ0 += qf.CSwap(q0, q1, q2)
circ0 += qf.CPhase(0.1, q1, q2)
# Not yet supported
# circ0 += qf.B(q1, q2)
# circ0 += qf.Swap(q1, q2) ** 0.1
qbc = xqutip.circuit_to_qutip(circ0)
U = gate_sequence_product(qbc.propagators())
gate0 = qf.Unitary(U.full(), qubits=[0, 1, 2])
assert qf.gates_close(gate0, circ0.asgate())
circ1 = xqutip.qutip_to_circuit(qbc)
assert qf.gates_close(circ0.asgate(), circ1.asgate())
def test_PauliGate_pow() -> None:
alpha = 0.4
gate0 = qf.PauliGate(qf.sZ(0), alpha)
gate1 = gate0 ** 0.3
gate2 = qf.Unitary(gate0.tensor, gate0.qubits) ** 0.3
assert qf.gates_close(gate1, gate2)
assert qf.gates_close(gate1.H, gate2 ** -1)
gate3 = qf.unitary_from_hamiltonian(gate0.hamiltonian, qubits=gate0.qubits)
assert qf.gates_close(gate0, gate3)
s = str(gate0)
print(s)
def test_translate_to_qutip() -> None:
circ0 = qf.Circuit()
circ0 += qf.Can(0.1, 0.2, 0.3, 0, 1)
qbc = xqutip.circuit_to_qutip(circ0, translate=True)
U = gate_sequence_product(qbc.propagators())
gate0 = qf.Unitary(U.full(), qubits=[0, 1])
assert qf.gates_close(gate0, circ0.asgate())
with pytest.raises(ValueError):
xqutip.circuit_to_qutip(circ0, translate=False)
circ1 = qf.Circuit()
circ1 += qf.Can(0.1, 0.2, 0.3, "a", "b")
with pytest.raises(ValueError):
xqutip.circuit_to_qutip(circ1, translate=True)
def test_transpose_map() -> None:
# The transpose map is a superoperator that transposes a 1-qubit
# density matrix. Not physical.
# quant-ph/0202124
q0 = 0
ops = [
qf.Unitary(np.asarray([[1, 0], [0, 0]]), [q0]),
qf.Unitary(np.asarray([[0, 0], [0, 1]]), [q0]),
qf.Unitary(np.asarray([[0, 1], [1, 0]]) / np.sqrt(2), [q0]),
qf.Unitary(np.asarray([[0, 1], [-1, 0]]) / np.sqrt(2), [q0]),
]
kraus = qf.Kraus(ops, weights=(1, 1, 1, -1))
rho0 = qf.random_density(1)
rho1 = kraus.evolve(rho0)
op0 = rho0.asoperator()
op1 = rho1.asoperator()
assert np.allclose(op0.T, op1)
# The Choi matrix should be same as Swap operator
choi = kraus.aschannel().choi()
assert np.allclose(choi, qf.Swap(0, 2).asoperator())
def test_kronecker_decomposition() -> None:
for _ in range(REPS):
left = qf.RandomGate([1]).asoperator()
right = qf.RandomGate([1]).asoperator()
both = np.kron(left, right)
gate0 = qf.Unitary(both, [0, 1])
circ = qf.kronecker_decomposition(gate0)
gate1 = circ.asgate()
assert qf.gates_close(gate0, gate1)
circ2 = qf.Circuit()
circ2 += qf.Z(0)
circ2 += qf.H(1)
gate2 = circ2.asgate()
circ3 = qf.kronecker_decomposition(gate2)
gate3 = circ3.asgate()
assert qf.gates_close(gate2, gate3)
circ4 = qf.kronecker_decomposition(gate0, euler="XYX")
gate4 = circ4.asgate()
assert qf.gates_close(gate0, gate4)
def test_PauliGate_more() -> None:
alphas = [0.1, 2.0, -3.14, -0.4]
paulis = [
qf.sZ(0) + 1,
qf.sY(0),
qf.sX(0),
0.5 * np.pi * qf.sZ(0) * qf.sZ(1),
0.5 * np.pi * qf.sX(0) * qf.sZ(1),
]
for alpha in alphas:
for pauli in paulis:
circ = qf.PauliGate(pauli, alpha)
qbs = circ.qubits
str(pauli)
op = pauli.asoperator(qbs)
U = scipy.linalg.expm(-1.0j * alpha * op)
gate = qf.Unitary(U, qbs)
assert qf.gates_close(gate, circ.asgate())
pauli = qf.sX(0) + qf.sZ(0)
with pytest.raises(ValueError):
qf.Circuit(qf.PauliGate(pauli, 0.2).decompose())
def test_cirq_to_circuit() -> None:
q0 = cq.LineQubit(0)
q1 = cq.LineQubit(1)
q2 = cq.LineQubit(2)
gate = cirq_to_circuit(cq.Circuit(cq.X(q0)))[0]
assert isinstance(gate, qf.X)
assert gate.qubits == (0, )
gate = cirq_to_circuit(cq.Circuit(cq.X(q1)**0.4))[0]
assert isinstance(gate, qf.XPow)
assert gate.qubits == (1, )
gate = cirq_to_circuit(cq.Circuit(cq.CZ(q1, q0)))[0]
assert isinstance(gate, qf.CZ)
assert gate.qubits == (1, 0)
gate = cirq_to_circuit(cq.Circuit(cq.CZ(q1, q0)**0.3))[0]
assert isinstance(gate, qf.CZPow)
assert gate.qubits == (1, 0)
assert gate.param("t") == 0.3
gate = cirq_to_circuit(cq.Circuit(cq.CNOT(q0, q1)))[0]
assert isinstance(gate, qf.CNot)
assert gate.qubits == (0, 1)
gate = cirq_to_circuit(cq.Circuit(cq.CNOT(q0, q1)**0.25))[0]
assert isinstance(gate, qf.CNotPow)
assert gate.qubits == (0, 1)
assert gate.param("t") == 0.25
gate = cirq_to_circuit(cq.Circuit(cq.SWAP(q0, q1)))[0]
assert isinstance(gate, qf.Swap)
gate = cirq_to_circuit(cq.Circuit(cq.ISWAP(q0, q1)))[0]
assert isinstance(gate, qf.ISwap)
gate = cirq_to_circuit(cq.Circuit(cq.CSWAP(q0, q1, q2)))[0]
assert isinstance(gate, qf.CSwap)
gate = cirq_to_circuit(cq.Circuit(cq.CCX(q0, q1, q2)))[0]
assert isinstance(gate, qf.CCNot)
gate = cirq_to_circuit(cq.Circuit(cq.CCZ(q0, q1, q2)))[0]
assert isinstance(gate, qf.CCZ)
gate = cirq_to_circuit(cq.Circuit(cq.I(q0)))[0]
assert isinstance(gate, qf.I)
gate = cirq_to_circuit(cq.Circuit(cq.XX(q0, q2)))[0]
assert isinstance(gate, qf.XX)
assert gate.param("t") == 1.0
gate = cirq_to_circuit(cq.Circuit(cq.XX(q0, q2)**0.3))[0]
assert isinstance(gate, qf.XX)
assert gate.param("t") == 0.3
gate = cirq_to_circuit(cq.Circuit(cq.YY(q0, q2)))[0]
assert isinstance(gate, qf.YY)
assert gate.param("t") == 1.0
gate = cirq_to_circuit(cq.Circuit(cq.YY(q0, q2)**0.3))[0]
assert isinstance(gate, qf.YY)
assert gate.param("t") == 0.3
gate = cirq_to_circuit(cq.Circuit(cq.ZZ(q0, q2)))[0]
assert isinstance(gate, qf.ZZ)
assert gate.param("t") == 1.0
gate = cirq_to_circuit(cq.Circuit(cq.ZZ(q0, q2)**0.3))[0]
assert isinstance(gate, qf.ZZ)
assert gate.param("t") == 0.3
# Check that cirq's parity gates are the same as QF's XX, YY, ZZ
# up to parity
U = (cq.XX(q0, q2)**0.8)._unitary_()
gate0 = qf.Unitary(U, [0, 1])
assert qf.gates_close(gate0, qf.XX(0.8, 0, 1))
U = (cq.YY(q0, q2)**0.3)._unitary_()
gate0 = qf.Unitary(U, [0, 1])
assert qf.gates_close(gate0, qf.YY(0.3, 0, 1))
U = (cq.ZZ(q0, q2)**0.2)._unitary_()
gate0 = qf.Unitary(U, [0, 1])
assert qf.gates_close(gate0, qf.ZZ(0.2, 0, 1))
