def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(False)
# 3D Axis Module:
axis3D = showerreco.Axis3DModule()
axis3D.setMaxIterations(100)
axis3D.setNStepsInitial(25)
axis3D.setTargetError(0.001)
axis3D.setNormalErrorRange(0.01)
axis3D.setThetaRangeStart(0.1)
axis3D.setThetaRangeMin(0.0005)
axis3D.setNStepsStart(4)
axis3D.setConvergeRate(0.85)
axis3D.setVerbosity(True)
axis3D.setSeedVectorErrorCutoff(0.1)
angle3D = showerreco.Angle3DFormula()
angle3D.setMaxAngleError(0.1)
angle3D.setVerbosity(False)
energy = showerreco.LinearEnergy()
energy.SetUseModBox(True)
energy.setVerbosity(False)
dqdx = showerreco.dQdxModule()
dedx = showerreco.dEdxFromdQdx()
dedx.SetUsePitch(False)
dedx.setVerbosity(False)
#alg.AddShowerRecoModule(axis3D)
alg.AddShowerRecoModule(angle3D)
alg.AddShowerRecoModule(showerreco.StartPoint3DModule())
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule(dqdx)
alg.AddShowerRecoModule(dedx)
# alg.AddShowerRecoModule(showerreco.StartPoint2DModule() )
#alg.AddShowerRecoModule(showerreco.OtherStartPoint3D() )
# alg.AddShowerRecoModule(showerreco.ShowerChargeModule() )
alg.AddShowerRecoModule(showerreco.GeoModule())
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(False)
alg.SetVerbose(False)
angle3D = showerreco.Angle3DFormula()
angle3D.setMaxAngleError(0.1)
angle3D.setValidateDirection(True)
angle3D.setVerbosity(False)
angle3D = showerreco.Angle3DFromVtxQweighted()
energy = showerreco.LinearEnergy()
energy.SetElectronLifetime(8000.) # in us MCC7 value
#energy.SetElectronLifetime(1e6 ) # in us DATA value
energy.SetRecombFactor(0.62)
#energy.SetElecGain(198) # e- / ADC DATA value
energy.SetElecGain(189) # MCC7 value
energy.setVerbosity(False)
energy.SetFillTree(True)
dqdx = showerreco.dQdxModule()
dedx = showerreco.dEdxFromdQdx()
dedx.SetUsePitch(False)
dedx.setVerbosity(False)
geoModule = showerreco.GeoModule()
geoModule.setFlipShowerDirection(False)
alg.AddShowerRecoModule(showerreco.StartPoint3DModule())
alg.AddShowerRecoModule(angle3D)
alg.AddShowerRecoModule(energy)
#alg.AddShowerRecoModule(dqdx)
#alg.AddShowerRecoModule(dedx)
alg.AddShowerRecoModule(geoModule)
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(False)
startPoint = showerreco.StartPointPandora()
axis = showerreco.PCA3DAxis()
energy = showerreco.LinearEnergy()
#energy.SetHitRecoCorrection(1.289, 0)
#energy.SetHitRecoCorrection(1.323, 1)
#energy.SetHitRecoCorrection(1.336, 2)
energy.SetUseModBox(True)
energy.setVerbosity(False)
dqdx = showerreco.dQdxModule()
dedx = showerreco.dEdxFromdQdx()
dedx.SetUsePitch(False)
dedx.setVerbosity(False)
alg.AddShowerRecoModule(showerreco.ToyGeoModule())
alg.AddShowerRecoModule(axis)
alg.AddShowerRecoModule(startPoint)
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule(dqdx)
alg.AddShowerRecoModule(dedx)
# alg.AddShowerRecoModule(showerreco.StartPoint2DModule() )
#alg.AddShowerRecoModule(showerreco.OtherStartPoint3D() )
# alg.AddShowerRecoModule(showerreco.ShowerChargeModule() )
# alg.AddShowerRecoModule(showerreco.GeoModule())
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(False)
angle3D = showerreco.Angle3DFromVtxQweighted()
energy = showerreco.LinearEnergy()
energy.SetUseModBox(True)
energy.SetUseArea(True)
energy.setVerbosity(False)
energy.SetFillTree(True)
energy.SetMinNumHits(20)
dqdx = showerreco.dQdxModule()
dqdx.setVerbosity(False)
dedx = showerreco.dEdxFromdQdx()
dedx.setVerbosity(False)
alg.AddShowerRecoModule(showerreco.StartPoint3DModule())
alg.AddShowerRecoModule(angle3D)
filter = showerreco.Filter3DDir()
filter.SetDotProdCut(0.5)
alg.AddShowerRecoModule(filter)
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule(dqdx)
alg.AddShowerRecoModule(dedx)
alg.AddShowerRecoModule(showerreco.GeoModule())
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(False)
alg.SetVerbose(False)
angle3D = showerreco.Angle3DFormula()
angle3D.setMaxAngleError(0.1)
angle3D.setValidateDirection(True)
angle3D.setVerbosity(False)
angle3D = showerreco.Angle3DFromVtxQweighted()
gain = 196.97874008458268
energy = showerreco.LinearEnergy()
energy.SetElectronLifetime(1e20) #1e6) #8000.) # in us MCC7 value
energy.SetRecombFactor(0.572)
energy.SetElecGain(gain) # e- / ADC DATA value, MCC8
#energy.SetElecGain(189) # MCC7 value
energy.setVerbosity(False)
energy.SetFillTree(True)
dqdx = showerreco.dQdxModule()
dedx = showerreco.dEdxFromdQdx()
dedx.SetUsePitch(False)
dedx.setVerbosity(True)
geoModule = showerreco.GeoModule()
geoModule.setFlipShowerDirection(False)
alg.AddShowerRecoModule( showerreco.StartPoint3DModule() )
alg.AddShowerRecoModule(angle3D)
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule( geoModule )
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(True)
alg.SetVerbose(False)
# filteralgo = showerreco.FilterPFPart()
# filteralgo.setMinNHitsAbsolute(5)
# filteralgo.setMinNHitsLargest(10)
# angle3D = showerreco.Angle3DFormula()
# angle3D.setMaxAngleError(0.1)
# angle3D.setValidateDirection(True)
# angle3D.setVerbosity(True)
angle3D = showerreco.Angle3DFromVtxQweighted()
angle3D.setVerbosity(True)
startPt = showerreco.YPlaneStartPoint3D()
startPt.setVerbosity(True)
energy = showerreco.LinearEnergy()
energy.setVerbosity(True)
# implement position-dependent calibration
energy.CreateResponseMap(20)
dQdsAVG = 248.
#fin = open('/a/share/westside/dcaratelli/ll_shower/UserDev/RecoTool/ShowerReco3D/dqds_mc_xyz.txt','r')
fin = open(
'/home/vgenty/sw/larlite/UserDev/RecoTool/ShowerReco3D/dqds_mc_xyz.txt',
'r')
for line in fin:
words = line.split()
x = float(words[0])
y = float(words[1])
z = float(words[2])
q = float(words[3])
energy.SetResponse(x, y, z, dQdsAVG / q)
energy.SetElectronLifetime(1e6) # in us DATA value
energy.SetRecombFactor(0.62)
#energy.SetElecGain(243.) # MCC8.0 data
energy.SetElecGain(200.) # MCC8.0 value
energy.setVerbosity(False)
energy.SetFillTree(True)
dqdx = showerreco.dQdxModule()
dqdx.setTrunkLength(3.)
# dqdx.SetFillTree(True)
# shrFilter = showerreco.FilterShowers()
# shrFilter.setAngleCut(15.)
# shrFilter.setVerbosity(False)
# alg.AddShowerRecoModule( filteralgo )
alg.AddShowerRecoModule(angle3D)
#alg.AddShowerRecoModule( showerreco.StartPoint3DModule() )
#alg.AddShowerRecoModule( showerreco.NearestStartPoint3D() )
alg.AddShowerRecoModule(startPt)
alg.AddShowerRecoModule(dqdx)
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule(showerreco.FillLength())
#alg.AddShowerRecoModule( shrFilter )
alg.PrintModuleList()
return alg
def getShowerRecoAlgModular():
# This function returns the default shower reco module
# If you want to extend, customize, or otherwise alter the default
# reco (which you should!) it's recommended that you do one of two
# things:
# 1) Copy this function, and change the lines you need
# 2) Use this function as is and replace the modules with the built-in functions
# to ShowerRecoAlgModular
# Then, use the return value (alg) in place of ShowerRecoAlg in your python script
# It should be noted, however, that this "default" set of modules is not yet developed
# and if you are developing you ought to be updating it here!
alg = showerreco.ShowerRecoAlgModular()
alg.SetDebug(True)
alg.SetVerbose(False)
filteralgo = showerreco.FilterPFPart()
filteralgo.setMinNHitsAbsolute(5)
filteralgo.setMinNHitsLargest(10)
angle3D = showerreco.Angle3DFormula()
angle3D.setMaxAngleError(0.1)
angle3D.setValidateDirection(True)
angle3D.setVerbosity(False)
angle3D = showerreco.Angle3DFromVtxQweighted()
startPt = showerreco.YPlaneStartPoint3D()
startPt.setVerbosity(False)
energy = showerreco.LinearEnergy()
energy.SetElectronLifetime(1e6 ) # in us DATA value
energy.SetRecombFactor(0.62)
energy.SetElecGain(243.) # MCC8.0 data
#energy.SetElecGain(200.) # MCC8.0 value
energy.setVerbosity(False)
energy.SetFillTree(True)
dqdx = showerreco.dQdxModule()
dedx = showerreco.dEdxFromdQdx()
dedx.SetUsePitch(False)
dedx.setVerbosity(True)
shrFilter = showerreco.FilterShowers()
shrFilter.setAngleCut(15.)
shrFilter.setVerbosity(True)
alg.AddShowerRecoModule( filteralgo )
alg.AddShowerRecoModule(angle3D)
#alg.AddShowerRecoModule( showerreco.StartPoint3DModule() )
#alg.AddShowerRecoModule( showerreco.NearestStartPoint3D() )
alg.AddShowerRecoModule( startPt )#showerreco.YPlaneStartPoint3D() )
alg.AddShowerRecoModule(energy)
alg.AddShowerRecoModule( showerreco.FillLength() )
alg.AddShowerRecoModule( shrFilter )
alg.PrintModuleList()
return alg