def part1(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
grid = []
for point in file_data:
if point == "":
break
x, y = point.split(",")
grid = add_point(int(x), int(y), grid)
folds = []
f = False
for fold in file_data:
if f:
folds.append(fold.split(' ')[2])
if fold == "":
f = True
for fold in folds:
[dir, line] = fold.split('=')
if (dir == "y"):
grid = fold_y(grid, int(line))
if (dir == "x"):
grid = fold_x(grid, int(line))
break
count = 0
for row, _ in enumerate(grid):
for col, _ in enumerate(grid[row]):
if grid[row][col] == ".":
count += 1
return count
def part2(path):
numbers = read_file(path or PATH, return_type=int, strip=True,
split=",")[0]
num_turns = 30000000
# A "memory" to store the past idices of values for quick lookup
last_occurance = [0] * num_turns
# Take the first few turns
for turn, num in enumerate(numbers[:-1], 1):
last_occurance[num] = turn
last_num = numbers[-1]
# interate through all the pages
for turn_number in range(len(numbers), num_turns):
# last time the number was said
last_seen = last_occurance[last_num]
# Distance from current number said
num_age = turn_number - last_seen
# First time number has been said
if num_age == turn_number:
num_age = 0
# load current number into memory
last_occurance[last_num] = turn_number
last_num = num_age
print(num_age)
def part_2(path):
global centre_of_mass,count
orbits = read_file(path or PATH, return_type=str,strip=True, split=")")
# Due to the randomness of the data, iterate through
# each pair searching for a node that fits into the tree,
# then remove that pair from the data. Quit when all nodes
# have been added to the tree
while len(orbits) > 0:
for i in range(len(orbits)):
if make_tree(orbits[i]):
orbits.remove(orbits[i])
break
# Find the pathways to two leaf nodes
you_path = find_node_trail(centre_of_mass,"YOU")
san_path = find_node_trail(centre_of_mass,"SAN")
# print(you_path)
# print(san_path)
# Find a the first matching OrbitNode between the two leaf node pathways
for node in you_path:
if node in san_path:
distance = san_path.index(node)-1 + you_path.index(node)-1
break
print("The minimum number of orbital transfers required between YOU and SAN is %d" % distance)
def part_1(path):
global IMAGE_WIDTH, IMAGE_HEIGHT
image = read_file(path or PATH, return_type=str, strip=True)[0]
image_size = len(image)
image_ptr = 0
smallest_zeros = -1
total = 0
while image_ptr < image_size:
layer = 0
num_zeros = 0
num_ones = 0
num_twos = 0
for idx in range(IMAGE_WIDTH):
for jdx in range(IMAGE_HEIGHT):
if image[image_ptr] == "0":
num_zeros += 1
elif image[image_ptr] == "1":
num_ones += 1
elif image[image_ptr] == "2":
num_twos += 1
image_ptr += 1
layer += 1
if num_zeros < smallest_zeros or smallest_zeros == -1:
smallest_zeros = num_zeros
total = num_ones * num_twos
print("The layer with the least 0s totalled %d (1's * 2's)" % (total))
def part2(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
grid = []
for point in file_data:
if point == "":
break
x, y = point.split(",")
grid = add_point(int(x), int(y), grid)
folds = []
f = False
for fold in file_data:
if f:
folds.append(fold.split(' ')[2])
if fold == "":
f = True
for fold in folds:
[dir, line] = fold.split('=')
if (dir == "y"):
grid = fold_y(grid, int(line))
if (dir == "x"):
grid = fold_x(grid, int(line))
display_grid(grid)
def part1(path):
shopping_list = read_file(path or PATH,return_type=str,strip=True)
dish_list = []
alergens = []
ingredients = []
for food in shopping_list:
(dish_ingredients,dish_alergens) = food.split("(")
dish_ingredients = dish_ingredients.split(" ")[:-1]
dish_alergens = dish_alergens.split(")")[0].split(" ")[1:]
for alergen in dish_alergens:
if alergen not in alergens:
alergens.append(alergen)
for ingredient in dish_ingredients:
if ingredient not in ingredients:
ingredients.append(ingredient)
dish_list.append(Dish(dish_ingredients,dish_alergens))
print(alergens)
print(ingredients)
for dish in dish_list:
print(dish)
def part_2(path):
global numSteps
wires = read_file(path or PATH, return_type=str, strip=True, split=",")
polar_wires = []
for wire in wires:
polar_wire = [[0, 0, 0]]
numSteps = 0
for direction in wire:
to_polar(polar_wire, direction)
polar_wires.append(polar_wire)
# sort the wires by Y then X values to derive an always incrementing pattern
for wire in polar_wires:
wire.sort(key=itemgetter(Y))
wire.sort(key=itemgetter(X))
matching_points = getMatchingPoints(polar_wires)
# Iterate through the matching points to calculate the smallest number of steps
smallest_steps = 0
for point in matching_points:
curr_steps = point[2] + point[3]
if curr_steps < smallest_steps or smallest_steps == 0:
smallest_steps = curr_steps
print(
"The fewest combined steps the wires must take to reach an intersection is %d"
% smallest_steps)
pass
def part_2(path):
# Colect the weights of the modules
module_weights = read_file(path or PATH, return_type=int, strip=True)
"""
Desc: A recursive function used to calculate the weight of modules,
then the weight of that added fuel and so on until reaching the
"Wishing really hard" cutoff
Param: weight: int of the weight to calculate fuel cost for
"""
def fuel_cost(weight):
curr_weight = 0
curr_cost = floor(weight / 3) - 2
# Wishing really hard cutoff
if (curr_cost >= 0):
# Add the current fuel weight to the total
curr_weight += curr_cost
# Calculate the next weight from the newly added fuel
curr_weight += fuel_cost(curr_cost)
return curr_weight
return 0
# Build an array of each modules total fuel costs
fuel_cost = [fuel_cost(weight) for weight in module_weights]
# Provide the summation as the solution
print(
"The sum of the complete fuel requirements for all of the modules is %d"
% sum(fuel_cost))
def part_2(path):
opcodes = read_file(path or PATH,return_type=int,strip=True,split=",")
highest_output = 0
best_phase = []
generation = 0
for code in opcodes:
for phase_setting in list(permutations([5,6,7,8,9])):
prev_input = 0
last_amplifier = 0
opcode_phase = [code.copy(),code.copy(),code.copy(),code.copy(),code.copy()]
while prev_input != -1:
amplifier = generation % 5
prev_input = comput_opcode(opcode_phase[amplifier],phase_setting[amplifier],prev_input)
print(prev_input, generation)
print(opcode_phase)
input()
# print(amplifier,prev_input,generation)
if amplifier == 4:
last_amplifier = prev_input
generation+=1
# print(phase_setting, last_amplifier)
if last_amplifier > highest_output:
highest_output = last_amplifier
def part_1(path):
# collect list of opcodes from the datafile
opcodes = read_file(path or PATH, return_type=int, strip=True, split=",")
# iterate through each opcode
for opcode in opcodes:
# initiate with pre "1202 program alarm" state
opcode[1] = 12
opcode[2] = 2
# skip 4 to reach next instruction
for i in range(0, len(opcode), 4):
if opcode[i] == 99:
break
# param 1 (i+1) as index for a
# param2 (i+2) as index for b
# param3 (i+3) as index for c
# addition opcode, c = a + b
if opcode[i] == 1:
opcode[opcode[i +
3]] = opcode[opcode[i + 1]] + opcode[opcode[i +
2]]
# multiplication opcode, c = a * b
elif opcode[i] == 2:
opcode[opcode[i +
3]] = opcode[opcode[i + 1]] * opcode[opcode[i +
2]]
print("Value left at address 0: %d" % opcode[0])
def part_1(path):
wires = read_file(path or PATH, return_type=str, strip=True, split=",")
polar_wires = []
for wire in wires:
polar_wire = [[0, 0, 0]]
for direction in wire:
to_polar(polar_wire, direction)
polar_wires.append(polar_wire)
# sort the wires by Y then X values to derive an always incrementing pattern
for wire in polar_wires:
wire.sort(key=itemgetter(Y))
wire.sort(key=itemgetter(X))
matching_points = getMatchingPoints(polar_wires)
# Iterate through the matching points to calculate the smallest distance
smallest_manhatten = 0
for point in matching_points:
curr_manhatten = abs(point[X]) + abs(point[Y])
if curr_manhatten < smallest_manhatten or smallest_manhatten == 0:
smallest_manhatten = curr_manhatten
print(
"The Manhattan distance from the central port to the closest intersection is %d"
% smallest_manhatten)
def part1(path):
ticket_specs = read_file(path or PATH, return_type=str, strip=True)
validator = Ticket_validator()
i = 0
while (ticket_specs[i] != ""):
validator.parse_rules(ticket_specs[i])
i += 1
i += 2
my_ticket = ticket_specs[i]
i += 3
sum = 0
while (i < len(ticket_specs)):
for val in ticket_specs[i].split(","):
try:
val = int(val)
except ValueError:
print("Something wrong with a ticket, val is not an int")
sys.exit()
if (not validator.within_rules(val)):
sum += val
i += 1
print(sum)
def part1(path):
inputs = read_file(path or PATH, return_type=str, strip=True)
most_common = []
for bit in inputs[0]:
most_common.append({
'0': 0,
'1': 0,
})
for input in inputs:
for i in range(len(input)):
most_common[i][input[i]] += 1
gamma_bin = []
epsilon_bin = []
for common in most_common:
if common['0'] > common['1']:
gamma_bin.append('0')
epsilon_bin.append('1')
else:
gamma_bin.append('1')
epsilon_bin.append('0')
gamma_dec = int("".join(gamma_bin), 2)
epsilon_dec = int("".join(epsilon_bin), 2)
print(gamma_dec * epsilon_dec)
def part1(path):
boarding_passes = read_file(path or PATH, return_type=str, strip=True)
_ids = []
for boarding_pass in boarding_passes:
_ids.append(retrieve_id(boarding_pass))
print(max(_ids))
def part_1(path):
# Colect the weights of the modules
module_weights = read_file(path or PATH, return_type=int, strip=True)
# Calculate the fuel cost for each module
fuel_cost = [floor(weight / 3) - 2 for weight in module_weights]
# Provide the summation as the solution
print("The sum of the fuel requirements for all of the modules is %d" %
sum(fuel_cost))
def part2(path): budget_report = read_file(path or PATH,return_type=int,strip=True) budget_report.sort() # print(budget_report) (i,j,k) = find_triplet(budget_report, MATCH_NUMBER) print(i,j,k,i+j+k,i*j*k) pass
def part2(path):
luggage_rules = read_file(path or PATH, return_type=str, strip=True)
rules = {}
for rule in luggage_rules:
(parent, children) = define_rule(rule)
rules[parent] = children
print(count_inner_bags(rules, "shiny gold") - 1)
def part1(path): budget_report = read_file(path or PATH,return_type=int,strip=True) budget_report.sort() # print(budget_report) (i,j) = find_pair(budget_report,MATCH_NUMBER) print(i,j,i*j) pass
def part2(path):
passwords = read_file(path or PATH, return_type=str, strip=True)
count = 0
for password in passwords:
spec = parse_password(password)
if (valid_password_xor(spec)):
count += 1
print(count)
def part1(path):
tree_rows = read_file(path or PATH, return_type=str, strip=True)
position = [0, 0]
max_width = len(tree_rows[0]) - 1
max_height = len(tree_rows) - 1
slope = [1, 3]
tree_count = walk_slope(tree_rows, position, slope, max_height, max_width)
print(tree_count)
def part1(path):
equations = read_file(path or PATH,return_type=str,strip=True)
sum = 0
for equation in equations:
equation = Equation(equation)
equation.evaluate()
# print(equation)
sum += equation.answer
print(sum)
def part1(path):
file_passports = read_file(path or PATH,return_type=str,strip=True)
passports = collect_passports(file_passports)
valid_count = 0
for passport in passports:
if (passport.is_valid()):
valid_count += 1
print(valid_count)
def part1(path):
depths = read_file(path or PATH, return_type=int, strip=True)
num_increases = 0
last_depth = depths[0]
for i in range(1,len(depths)):
if (depths[i] > last_depth):
num_increases += 1
last_depth = depths[i]
print(f"Number of increases {num_increases}")
def part2(path):
port_output = read_file(path or PATH,return_type=int,strip=True)
weakness_sum = find_invalid_number(port_output)
if (len(weakness_sum) > 1):
print("Something has gone wrong")
sys.exit()
weakness_sum = weakness_sum[0]
contiguous_list = contiguous_sum(port_output,weakness_sum)
print(min(contiguous_list) + max(contiguous_list))
def part2(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
caves = build_map(file_data)
# for cave in caves:
# print(cave, caves[cave])
find_path_part_2(caves, 'start', ['start'], 0)
# for path in CAVE_PATHS:
# print(path)
return len(CAVE_PATHS)
def part1(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
fishes = [Fish(int(fish)) for fish in file_data[0].split(',')]
for _ in range(80):
for fish in fishes:
did_cycle = fish.grow()
if (did_cycle):
fishes.append(Fish(9))
return (len(fishes))
def part1(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
octopi = build_matrix(file_data)
steps = 100
total_flashes = 0
for _ in range(steps):
octopi = charge(octopi)
octopi = flash(octopi)
(octopi, flashes) = count(octopi)
total_flashes += flashes
return total_flashes
def part2(path):
boarding_passes = read_file(path or PATH, return_type=str, strip=True)
_ids = []
for boarding_pass in boarding_passes:
_ids.append(retrieve_id(boarding_pass))
lower_bound = min(_ids)
upper_bound = max(_ids)
my_seat = sum(list(range(lower_bound, upper_bound + 1))) - sum(_ids)
print(my_seat)
def part1(path):
file_data = read_file(path or PATH, return_type=str, strip=True)
template, replacements = get_input(file_data)
for _ in range(10):
template = make_replacements(template, replacements)
counts = defaultdict(int)
for el in template:
counts[el] += 1
return max(counts.values()) - min(counts.values())
def part_2(path):
# collect list of opcodes from the datafile
opcodes = read_file(path or PATH, return_type=int, strip=True, split=",")
"""
Desc: Initiate the opcode with the noun and verb, and execute the adjusted opcode returning the value in address 0
Param: opcode: list of ints used to simulate an Intcode computer,
noun: int to initiate address[1]
verb: int to initiate address[2]
"""
def comput_opcode(opcode=None, noun=0, verb=0):
if not opcode:
print("Please provide an opcode for computation")
exit(0)
# Initiate opcode
opcode[1], opcode[2] = noun, verb
# skip 4 to reach next instruction
for i in range(0, len(opcode), 4):
if opcode[i] == 99:
break
# param 1 (i+1) as index for a
# param2 (i+2) as index for b
# param3 (i+3) as index for c
# addition opcode, c = a + b
if opcode[i] == 1:
opcode[opcode[i +
3]] = opcode[opcode[i + 1]] + opcode[opcode[i +
2]]
# addition opcode, c = a * b
elif opcode[i] == 2:
opcode[opcode[i +
3]] = opcode[opcode[i + 1]] * opcode[opcode[i +
2]]
return opcode[0]
# iterate through each opcode
for opcode in opcodes:
max_val = len(opcode) - 1
# Check all combinations of nouns and verbs from 0 - 99
for noun in range(100):
for verb in range(100):
# check for overflow
if noun > max_val or verb > max_val:
continue
# compute the opcode with the current combination of noun, verb
address_0 = comput_opcode(opcode.copy(), noun, verb)
if (address_0 == 19690720):
print("Noun: %d, Verb: %d" % (noun, verb))
print("What is 100 * noun + verb = %d" %
(100 * noun + verb))
