def __call__( self, points ):
'''Return the global coordinates of the supplied local points.
'''
# number of local grid points for each coordinate direction
# values must range between 0 and 1
#
xi, yi, zi = points[:, 0], points[:, 1], points[:, 2]
print "xi", xi
print "xi.shape", xi.shape
# size of total structure
#
# @todo: move to class definition of "mushroof_model" and send to "__call__"
scale_size = self.scale_size
print "scale_size", scale_size
# @todo: add "_quarter" (see above)
length_x_tot = self.length_x * scale_size
length_y_tot = self.length_y * scale_size
n_elems_xy_quarter = self.n_elems_xy_quarter
# distance from origin for each mushroof_part
#
def d_origin_fn( self, coords ):
# if self.mushroof_part == 'quarter':
# return coords
# if self.mushroof_part == 'one':
# return abs( 2.0 * coords - 1.0 )
if self.mushroof_part == 'detail':
print 'in d_origin_fn'
return abs( 1.0 * coords - 0.5 ) * scale_size
# # @todo: corresponding "scale_factor" needs to be added
# # in order for this to work
# if self.mushroof_part == 'four':
# return where( coords < 0.5, abs( 4 * coords - 1 ), abs( -4 * coords + 3 ) )
# values are used to calculate the z-coordinate using RBF-function of the quarter
# (= values of the distance to the origin as absolute value)
#
xi_rbf = d_origin_fn( self, xi )
print 'xi_rbf', xi_rbf
yi_rbf = d_origin_fn( self, yi )
# normalized coordinates of the vertices for lower- and upperface
# NOTE: the underline character indicates a normalized value
#
vl_arr_, vu_arr_ = normalize_rsurfaces( self.vl_arr,
self.vu_arr )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
#
x_ = vl_arr_[:, 0]
# flip the orientation of the local coordinate system in the
# corresponding y-direction depending on the data file
#
geo_input_name = self.geo_input_name
if geo_input_name == '4x4m':
y_ = vl_arr_[:, 1]
else:
y_ = 1 - vl_arr_[:, 1]
z_ = vl_arr_[:, 2]
rbf = Rbf( x_, y_, z_, function = 'cubic' )
# get the z-value at the supplied local grid points
# of the lower face
#
zi_lower_ = rbf( xi_rbf, yi_rbf )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
#
x_ = vu_arr_[:, 0]
# flip the orientation of the local coordinate system in the
# corresponding y-direction depending on the data file
#
geo_input_name = self.geo_input_name
if geo_input_name == '4x4m':
y_ = vu_arr_[:, 1]
else:
y_ = 1 - vu_arr_[:, 1]
z_ = vu_arr_[:, 2]
rbf = Rbf( x_, y_, z_, function = 'cubic' )
# get the z-value at the supplied local grid points
# of the upper face
#
# note that zi_upper_ is a normalized coordinate!
#
zi_upper_ = rbf( xi_rbf, yi_rbf )
# thickness is multiplied by the supplied zi coordinate
#
z_ = ( zi_lower_ + ( zi_upper_ - zi_lower_ ) * zi / self.delta_h_scalefactor ) * self.delta_h_scalefactor
# coordinates of origin
#
X, Y, Z = self.X0
print '--- geometric transformation done ---'
# multiply the local grid points with the real dimensions in order to obtain the
# global coordinates of the mushroof_part:
#
return c_[ X + xi * length_x_tot, Y + yi * length_y_tot, Z + z_ * self.length_z ]
def __call__( self, points ):
'''Return the global coordinates of the supplied local points.
'''
# number of local grid points for each coordinate direction
# values must range between 0 and 1
Xc, Yc, Zc = self.center
Xi, Yi, Zi = points[:, 0] - Xc, points[:, 1] - Yc, points[:, 2] - Zc
sxi, syi = sign( Xi ), sign( Yi )
xi, yi, zi = fabs( Xi ), fabs( Yi ), Zi
# normalized coordinates of the vertices for lower- and upperface
# NOTE: the underline character indicates a normalized value
vl_arr_, vu_arr_ = normalize_rsurfaces( self.vl_arr,
self.vu_arr )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
x_ = vl_arr_[:, 0] * self.length_x
# for file 'upperface02.robj' and 'lowerface02.robj' the
# orientation of the local coordinate system in the
# corresponding y-direction needs to be fliped
# e.g. y_ = 1 - vl_arr_[:, 1]
# for the file 'upperface_4x4m.robj' and 'lowerface_4x4m.robj'
# this is not the case!
#
y_ = vl_arr_[:, 1] * self.length_y
z_ = vl_arr_[:, 2] * self.length_z
rbf = Rbf( x_, y_, z_, function = 'cubic' )
# get the z-value at the supplied local grid points
# of the lower face
zi_lower_ = rbf( xi, yi )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
x_ = vu_arr_[:, 0] * self.length_x
# flip the orientation of the local coordinate system in the
# corresponding y-direction
# for file 'upperface02.robj' and 'lowerface02.robj' the
# orientation of the local coordinate system in the
# corresponding y-direction needs to be fliped
# e.g. y_ = 1 - vl_arr_[:, 1]
# for the file 'upperface_4x4m.robj' and 'lowerface_4x4m.robj'
# this is not the case!
#
y_ = vu_arr_[:, 1] * self.length_y
z_ = vu_arr_[:, 2] * self.length_z
rbf = Rbf( x_, y_, z_, function = 'cubic' )
# get the z-value at the supplied local grid points
# of the upper face
zi_upper_ = rbf( xi, yi )
# thickness is multiplied by the supplied zi coordinate
z_ = zi_lower_ + ( zi_upper_ - zi_lower_ ) * zi
# multiply the local grid points with the real dimensions in order to obtain the
# global coordinates of the structure:
#
Xi, Yi, Zi = sxi * xi, syi * yi, z_ # * self.length_z
return c_[ Xi + Xc, Yi + Yc , Zi + Zc ]
def _get_vu_arr_(self):
vl_arr_, vu_arr_ = normalize_rsurfaces(self.vl_arr, self.vu_arr)
return vu_arr_
def get_mid_surface_and_thickness( hp_shell, points, perpendicular_t = True ):
'''Return the global coordinates of the supplied local points.
'''
print '*** get mid surface and thickness ***'
#-----------------------------------------------
# get the global coordinates as defined in the
# input file and transform them to the coordinate
# system of the master quarter
#-----------------------------------------------
#
if hp_shell.geo_input_name == '350x350cm':
# X0 = [3.50, 3.50, 0.]
X0 = [0., 0., 0.]
else:
X0 = [0., 0., 0.]
# number of global grid points for each coordinate direction
#
xi, yi = points[:, 0] - X0[0], points[:, 1] - X0[1]
# NOTE:
# -- The available rbf-function is only defined for a quarter of one shell.
# in order to get z and t values for an entire shell the abs-function
# is used. The coordinate system of the quarter must be defined in the
# lower left corner; the coordinate systemn of the entire one shell must
# be defined in the center of the shell so that the coordinate system
# for the master quarter remains unchanged.
# -- The transformation is performed based on the defined class attributes
# of hp_shell_stb: length_xy_quarter, length_xy_quarter, length_z, delta_h, scalefactor_delta_h
# characterizing the properties of the master quarter
# number of local grid points for each coordinate direction
# values must range between 0 and 1
#
points_tilde_list = []
for i_row in range( points.shape[0] ):
# get the x, y coordinate pair defined in the input
# file in global coordinates
#
x = xi[i_row]
y = yi[i_row]
# transform values to local coordinate system,
# i.e. move point to the 'master roof' containing the
# global coordinate system:
#
if x <= hp_shell.length_xy_quarter and y <= hp_shell.length_xy_quarter:
# point lays in first (master) roof
#
x_tilde = x
y_tilde = y
elif x >= hp_shell.length_xy_quarter and y <= hp_shell.length_xy_quarter:
# point lays in second roof:
#
# roof length = 2* length of the master quarter
# (e.g. 2*4,0m = 8,00m for obj-file "4x4m")
x_tilde = x - 2 * hp_shell.length_xy_quarter
y_tilde = y
elif x <= hp_shell.length_xy_quarter and y >= hp_shell.length_xy_quarter:
# point lays in third roof:
#
x_tilde = x
y_tilde = y - 2 * hp_shell.length_xy_quarter
elif x >= hp_shell.length_xy_quarter and y >= hp_shell.length_xy_quarter:
# point lays in fourth roof:
#
x_tilde = x - 2 * hp_shell.length_xy_quarter
y_tilde = y - 2 * hp_shell.length_xy_quarter
points_tilde_list.append( [x_tilde, y_tilde] )
points_tilde_arr = array( points_tilde_list, dtype = 'float_' )
xi_tilde = points_tilde_arr[:, 0]
yi_tilde = points_tilde_arr[:, 1]
# print 'points_tilde_arr', points_tilde_arr
xi_ = abs( xi_tilde ) / hp_shell.length_xy_quarter
yi_ = abs( yi_tilde ) / hp_shell.length_xy_quarter
#-----------------------------------------------
# get the normalized rbf-function for the upper
# and lower face of the master quarter
#-----------------------------------------------
# NOTE: the underline character indicates a normalized value
# normalized coordinates of the vertices for lower- and upper-face
#
vl_arr_, vu_arr_ = normalize_rsurfaces( hp_shell.vl_arr,
hp_shell.vu_arr )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
#
x_ = vl_arr_[:, 0]
y_ = vl_arr_[:, 1]
if hp_shell.geo_input_name == '350x350cm':
x_ = 1 - vl_arr_[:, 0]
z_l_ = vl_arr_[:, 2]
rbf_l = Rbf( x_, y_, z_l_, function = 'cubic' )
# get the z-value at the supplied local grid points
# of the lower face
#
zi_lower_ = rbf_l( xi_, yi_ )
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
#
x_ = vu_arr_[:, 0]
y_ = vu_arr_[:, 1]
if hp_shell.geo_input_name == '350x350cm':
x_ = 1 - vu_arr_[:, 0]
z_u_ = vu_arr_[:, 2]
rbf_u = Rbf( x_, y_, z_u_ , function = 'cubic' )
# get the z-value at the supplied local grid points
# of the upper face
#
zi_upper_ = rbf_u( xi_, yi_ )
# approach of the slope to get thickness perpendicular to slope
#
# thickness is multiplied by the supplied zi coordinate
# and z value of mid plane
#
t_ = zi_upper_ - zi_lower_
z_middle_ = ( zi_lower_ + ( zi_upper_ - zi_lower_ ) * 0.5 / hp_shell.scalefactor_delta_h ) * hp_shell.scalefactor_delta_h
if perpendicular_t == True:
# delta shift of x and y for estimation of slope will be done in 4 direction
# 0, 45, 90 and 135 degrees
print "--- perpendicular ---"
delta = 0.000001
# shift in x
dz_x_p_ = ( rbf_u( xi_ + delta, yi_ ) + rbf_l( xi_ + delta, yi_ ) ) / 2.0
dz_x_m_ = ( rbf_u( xi_ - delta, yi_ ) + rbf_l( xi_ - delta, yi_ ) ) / 2.0
slope_x_ = ( dz_x_p_ - dz_x_m_ ) / ( 2.0 * delta )
angle_x = arctan( slope_x_ * hp_shell.length_z / hp_shell.length_xy_quarter )
f_1 = cos( angle_x )
# shift in y
dz_y_p_ = ( rbf_u( xi_, yi_ + delta ) + rbf_l( xi_, yi_ + delta ) ) / 2.0
dz_y_m_ = ( rbf_u( xi_, yi_ - delta ) + rbf_l( xi_, yi_ - delta ) ) / 2.0
slope_y_ = ( dz_y_p_ - dz_y_m_ ) / ( 2.0 * delta )
angle_y = arctan( slope_y_ * hp_shell.length_z / hp_shell.length_xy_quarter )
f_2 = cos( angle_y )
#shift +x +y; -x -y
dz_x_p_y_p_ = ( rbf_u( xi_ + delta, yi_ + delta ) + rbf_l( xi_ + delta, yi_ + delta ) ) / 2.0
dz_x_m_y_m_ = ( rbf_u( xi_ - delta, yi_ - delta ) + rbf_l( xi_ - delta, yi_ - delta ) ) / 2.0
slope_x_p_y_p_ = ( dz_x_p_y_p_ - dz_x_m_y_m_ ) / ( 2.0 * sqrt( 2 ) * delta )
angle_x_p_y_p = arctan( slope_x_p_y_p_ * hp_shell.length_z /
( hp_shell.length_xy_quarter ** 2 + hp_shell.length_xy_quarter ** 2 ) ** 0.5 )
f_3 = cos( angle_x_p_y_p )
# shift in +x,-y ; -x and +y
dz_x_p_y_m_ = ( rbf_u( xi_ + delta, yi_ - delta ) + rbf_l( xi_ + delta, yi_ - delta ) ) / 2.0
dz_x_m_y_p_ = ( rbf_u( xi_ - delta, yi_ + delta ) + rbf_l( xi_ - delta, yi_ + delta ) ) / 2.0
slope_x_p_y_m_ = ( dz_x_p_y_m_ - dz_x_m_y_p_ ) / ( sqrt( 2 ) * 2.0 * delta )
angle_x_p_y_m = arctan( slope_x_p_y_m_ * hp_shell.length_z /
( hp_shell.length_xy_quarter ** 2 + hp_shell.length_xy_quarter ** 2 ) ** 0.5 )
f_4 = cos( angle_x_p_y_m )
# obtain minimum factor for good estimate of maximum slope
factor = min( [f_1, f_2, f_3, f_4], axis = 0 )
t_ = t_ * factor
return xi, yi, z_middle_ * hp_shell.length_z, t_ * hp_shell.length_z
def get_mid_surface_and_thickness(self, points, perpendicular_t=True):
'''Return the global coordinates of the supplied local points.
'''
print '*** get mid surface and thickness ***'
#-----------------------------------------------
# get the global coordinates as defined in the
# input file and transform them to the coordinate
# system of the master quarter
#-----------------------------------------------
#
if self.geo_input_name == '350x350cm':
X0 = [3.50, 3.50, 0.]
else:
X0 = [0., 0., 0.]
# number of global grid points for each coordinate direction
#
xi, yi = points[:, 0] - X0[0], points[:, 1] - X0[1]
# NOTE:
# -- The available rbf-function is only defined for a quarter of one shell.
# in order to get z and t values for an entire shell the abs-function
# is used. The coordinate system of the quarter must be defined in the
# lower left corner; the coordinate systemn of the entire one shell must
# be defined in the center of the shell so that the coordinate system
# for the master quarter remains unchanged.
# -- The transformation is performed based on the defined class attributes
# of hp_shell_stb: length_x, length_y, length_z, delta_h, delta_h_scalefactor
# characterizing the properties of the master quarter
# number of local grid points for each coordinate direction
# values must range between 0 and 1
#
points_tilde_list = []
for i_row in range(points.shape[0]):
# get the x, y coordinate pair defined in the input
# file in global coordinates
#
x = xi[i_row]
y = yi[i_row]
# transform values to local coordinate system,
# i.e. move point to the 'master roof' containing the
# global coordinate system:
#
if x <= self.length_x and y <= self.length_y:
# point lays in first (master) roof
#
x_tilde = x
y_tilde = y
elif x >= self.length_x and y <= self.length_y:
# point lays in second roof:
#
# roof length = 2* length of the master quarter
# (e.g. 2*4,0m = 8,00m for obj-file "4x4m")
x_tilde = x - 2 * self.length_x
y_tilde = y
elif x <= self.length_x and y >= self.length_y:
# point lays in third roof:
#
x_tilde = x
y_tilde = y - 2 * self.length_y
elif x >= self.length_x and y >= self.length_y:
# point lays in fourth roof:
#
x_tilde = x - 2 * self.length_x
y_tilde = y - 2 * self.length_y
points_tilde_list.append([x_tilde, y_tilde])
points_tilde_arr = array(points_tilde_list, dtype='float_')
xi_tilde = points_tilde_arr[:, 0]
yi_tilde = points_tilde_arr[:, 1]
# print 'points_tilde_arr', points_tilde_arr
xi_ = abs(xi_tilde) / self.length_x
yi_ = abs(yi_tilde) / self.length_y
#-----------------------------------------------
# get the normalized rbf-function for the upper
# and lower face of the master quarter
#-----------------------------------------------
# NOTE: the underline character indicates a normalized value
# normalized coordinates of the vertices for lower- and upper-face
#
vl_arr_, vu_arr_ = normalize_rsurfaces(self.vl_arr, self.vu_arr)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
#
x_ = vl_arr_[:, 0]
y_ = vl_arr_[:, 1]
if self.geo_input_name == '350x350cm':
x_ = 1 - vl_arr_[:, 0]
z_l_ = vl_arr_[:, 2]
rbf_l = Rbf(x_, y_, z_l_, function='cubic')
# get the z-value at the supplied local grid points
# of the lower face
#
zi_lower_ = rbf_l(xi_, yi_)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
#
x_ = vu_arr_[:, 0]
y_ = vu_arr_[:, 1]
if self.geo_input_name == '350x350cm':
x_ = 1 - vu_arr_[:, 0]
z_u_ = vu_arr_[:, 2]
rbf_u = Rbf(x_, y_, z_u_, function='cubic')
# get the z-value at the supplied local grid points
# of the upper face
#
zi_upper_ = rbf_u(xi_, yi_)
# approach of the slope to get thickness perpendicular to slope
#
# thickness is multiplied by the supplied zi coordinate
# and z value of mid plane
#
t_ = zi_upper_ - zi_lower_
z_middle_ = (zi_lower_ + (zi_upper_ - zi_lower_) * 0.5 /
self.delta_h_scalefactor) * self.delta_h_scalefactor
if perpendicular_t == True:
# delta shift of x and y for estimation of slope will be done in 4 direction
# 0, 45, 90 and 135 degrees
print "--- perpendicular ---"
delta = 0.000001
# shift in x
dz_x_p_ = (rbf_u(xi_ + delta, yi_) + rbf_l(xi_ + delta, yi_)) / 2.0
dz_x_m_ = (rbf_u(xi_ - delta, yi_) + rbf_l(xi_ - delta, yi_)) / 2.0
slope_x_ = (dz_x_p_ - dz_x_m_) / (2.0 * delta)
angle_x = arctan(slope_x_ * self.length_z / self.length_x)
f_1 = cos(angle_x)
# shift in y
dz_y_p_ = (rbf_u(xi_, yi_ + delta) + rbf_l(xi_, yi_ + delta)) / 2.0
dz_y_m_ = (rbf_u(xi_, yi_ - delta) + rbf_l(xi_, yi_ - delta)) / 2.0
slope_y_ = (dz_y_p_ - dz_y_m_) / (2.0 * delta)
angle_y = arctan(slope_y_ * self.length_z / self.length_x)
f_2 = cos(angle_y)
#shift +x +y; -x -y
dz_x_p_y_p_ = (rbf_u(xi_ + delta, yi_ + delta) +
rbf_l(xi_ + delta, yi_ + delta)) / 2.0
dz_x_m_y_m_ = (rbf_u(xi_ - delta, yi_ - delta) +
rbf_l(xi_ - delta, yi_ - delta)) / 2.0
slope_x_p_y_p_ = (dz_x_p_y_p_ - dz_x_m_y_m_) / (2.0 * sqrt(2) *
delta)
angle_x_p_y_p = arctan(slope_x_p_y_p_ * self.length_z /
(self.length_x**2 + self.length_y**2)**0.5)
f_3 = cos(angle_x_p_y_p)
# shift in +x,-y ; -x and +y
dz_x_p_y_m_ = (rbf_u(xi_ + delta, yi_ - delta) +
rbf_l(xi_ + delta, yi_ - delta)) / 2.0
dz_x_m_y_p_ = (rbf_u(xi_ - delta, yi_ + delta) +
rbf_l(xi_ - delta, yi_ + delta)) / 2.0
slope_x_p_y_m_ = (dz_x_p_y_m_ - dz_x_m_y_p_) / (sqrt(2) * 2.0 *
delta)
angle_x_p_y_m = arctan(slope_x_p_y_m_ * self.length_z /
(self.length_x**2 + self.length_y**2)**0.5)
f_4 = cos(angle_x_p_y_m)
# obtain minimum factor for good estimate of maximum slope
factor = min([f_1, f_2, f_3, f_4], axis=0)
t_ = t_ * factor
return xi, yi, z_middle_ * self.length_z, t_ * self.length_z
def _get_vu_arr_(self):
vl_arr_, vu_arr_ = normalize_rsurfaces(self.vl_arr, self.vu_arr)
return vu_arr_
def __call__(self, points):
'''Return the global coordinates of the supplied local points.
'''
# number of local grid points for each coordinate direction
# values must range between 0 and 1
#
xi, yi, zi = points[:, 0], points[:, 1], points[:, 2]
print "xi", xi
print "xi.shape", xi.shape
# size of total structure
#
# @todo: move to class definition of "mushroof_model" and send to "__call__"
scale_size = self.scale_size
print "scale_size", scale_size
# @todo: add "_quarter" (see above)
length_x_tot = self.length_x * scale_size
length_y_tot = self.length_y * scale_size
n_elems_xy_quarter = self.n_elems_xy_quarter
# distance from origin for each mushroof_part
#
def d_origin_fn(self, coords):
# if self.mushroof_part == 'quarter':
# return coords
# if self.mushroof_part == 'one':
# return abs( 2.0 * coords - 1.0 )
if self.mushroof_part == 'detail':
print 'in d_origin_fn'
return abs(1.0 * coords - 0.5) * scale_size
# # @todo: corresponding "scale_factor" needs to be added
# # in order for this to work
# if self.mushroof_part == 'four':
# return where( coords < 0.5, abs( 4 * coords - 1 ), abs( -4 * coords + 3 ) )
# values are used to calculate the z-coordinate using RBF-function of the quarter
# (= values of the distance to the origin as absolute value)
#
xi_rbf = d_origin_fn(self, xi)
print 'xi_rbf', xi_rbf
yi_rbf = d_origin_fn(self, yi)
# normalized coordinates of the vertices for lower- and upperface
# NOTE: the underline character indicates a normalized value
#
vl_arr_, vu_arr_ = normalize_rsurfaces(self.vl_arr, self.vu_arr)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
#
x_ = vl_arr_[:, 0]
# flip the orientation of the local coordinate system in the
# corresponding y-direction depending on the data file
#
geo_input_name = self.geo_input_name
if geo_input_name == '4x4m':
y_ = vl_arr_[:, 1]
else:
y_ = 1 - vl_arr_[:, 1]
z_ = vl_arr_[:, 2]
rbf = Rbf(x_, y_, z_, function='cubic')
# get the z-value at the supplied local grid points
# of the lower face
#
zi_lower_ = rbf(xi_rbf, yi_rbf)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
#
x_ = vu_arr_[:, 0]
# flip the orientation of the local coordinate system in the
# corresponding y-direction depending on the data file
#
geo_input_name = self.geo_input_name
if geo_input_name == '4x4m':
y_ = vu_arr_[:, 1]
else:
y_ = 1 - vu_arr_[:, 1]
z_ = vu_arr_[:, 2]
rbf = Rbf(x_, y_, z_, function='cubic')
# get the z-value at the supplied local grid points
# of the upper face
#
# note that zi_upper_ is a normalized coordinate!
#
zi_upper_ = rbf(xi_rbf, yi_rbf)
# thickness is multiplied by the supplied zi coordinate
#
z_ = (zi_lower_ + (zi_upper_ - zi_lower_) * zi /
self.delta_h_scalefactor) * self.delta_h_scalefactor
# coordinates of origin
#
X, Y, Z = self.X0
print '--- geometric transformation done ---'
# multiply the local grid points with the real dimensions in order to obtain the
# global coordinates of the mushroof_part:
#
return c_[X + xi * length_x_tot, Y + yi * length_y_tot,
Z + z_ * self.length_z]
def __call__(self, points):
'''Return the global coordinates of the supplied local points.
'''
# number of local grid points for each coordinate direction
# values must range between 0 and 1
Xc, Yc, Zc = self.center
Xi, Yi, Zi = points[:, 0] - Xc, points[:, 1] - Yc, points[:, 2] - Zc
sxi, syi = sign(Xi), sign(Yi)
xi, yi, zi = fabs(Xi), fabs(Yi), Zi
# normalized coordinates of the vertices for lower- and upperface
# NOTE: the underline character indicates a normalized value
vl_arr_, vu_arr_ = normalize_rsurfaces(self.vl_arr, self.vu_arr)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the lower face
x_ = vl_arr_[:, 0] * self.length_x
# for file 'upperface02.robj' and 'lowerface02.robj' the
# orientation of the local coordinate system in the
# corresponding y-direction needs to be fliped
# e.g. y_ = 1 - vl_arr_[:, 1]
# for the file 'upperface_4x4m.robj' and 'lowerface_4x4m.robj'
# this is not the case!
#
y_ = vl_arr_[:, 1] * self.length_y
z_ = vl_arr_[:, 2] * self.length_z
rbf = Rbf(x_, y_, z_, function='cubic')
# get the z-value at the supplied local grid points
# of the lower face
zi_lower_ = rbf(xi, yi)
# use a radial basis function approximation (rbf) (i.e. interpolation of
# scattered data) based on the normalized vertex points of the upper face
x_ = vu_arr_[:, 0] * self.length_x
# flip the orientation of the local coordinate system in the
# corresponding y-direction
# for file 'upperface02.robj' and 'lowerface02.robj' the
# orientation of the local coordinate system in the
# corresponding y-direction needs to be fliped
# e.g. y_ = 1 - vl_arr_[:, 1]
# for the file 'upperface_4x4m.robj' and 'lowerface_4x4m.robj'
# this is not the case!
#
y_ = vu_arr_[:, 1] * self.length_y
z_ = vu_arr_[:, 2] * self.length_z
rbf = Rbf(x_, y_, z_, function='cubic')
# get the z-value at the supplied local grid points
# of the upper face
zi_upper_ = rbf(xi, yi)
# thickness is multiplied by the supplied zi coordinate
z_ = zi_lower_ + (zi_upper_ - zi_lower_) * zi
# multiply the local grid points with the real dimensions in order to obtain the
# global coordinates of the structure:
#
Xi, Yi, Zi = sxi * xi, syi * yi, z_ # * self.length_z
return c_[Xi + Xc, Yi + Yc, Zi + Zc]
