示例#1
0
    def switch_features_handler(self, event):
        """ Switche sent his features, check if OpenState supported """
        msg = event.msg
        datapath = msg.datapath

        LOG.info("Configuring switch %d..." % datapath.id)
        """ Set table 0 as stateful """
        req = osparser.OFPExpMsgConfigureStatefulTable(datapath=datapath,
                                                       table_id=0,
                                                       stateful=1)
        datapath.send_msg(req)
        """ Set lookup extractor = {eth_dst} """
        req = osparser.OFPExpMsgKeyExtract(
            datapath=datapath,
            command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
            fields=[ofproto.OXM_OF_ETH_DST],
            table_id=0)
        datapath.send_msg(req)
        """ Set update extractor = {eth_src}  """
        req = osparser.OFPExpMsgKeyExtract(
            datapath=datapath,
            command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
            fields=[ofproto.OXM_OF_ETH_SRC],
            table_id=0)
        datapath.send_msg(req)

        # for each input port, for each state
        for i in range(1, N + 1):
            for s in range(N + 1):
                match = ofparser.OFPMatch(in_port=i, state=s)
                if s == 0:
                    out_port = ofproto.OFPP_FLOOD
                else:
                    out_port = s
                actions = [
                    osparser.OFPExpActionSetState(state=i,
                                                  table_id=0,
                                                  hard_timeout=10),
                    ofparser.OFPActionOutput(out_port)
                ]
                self.add_flow(datapath=datapath,
                              table_id=0,
                              priority=0,
                              match=match,
                              actions=actions)
        """ Need to drop some packets for DEMO puporses only (avoid learning before manual send_eth)"""
示例#2
0
    def switch_features_handler(self, ev):
        msg = ev.msg
        datapath = msg.datapath

        LOG.info("Configuring switch %d..." % datapath.id)
        """ Set table 0 as stateful """
        req = osparser.OFPExpMsgConfigureStatefulTable(datapath=datapath,
                                                       table_id=0,
                                                       stateful=1)
        datapath.send_msg(req)
        """ Set lookup extractor = {ip_src} """
        req = osparser.OFPExpMsgKeyExtract(
            datapath=datapath,
            command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
            fields=[ofproto.OXM_OF_IPV4_SRC],
            table_id=0)
        datapath.send_msg(req)
        """ Set update extractor = {ip_src} (same as lookup) """
        req = osparser.OFPExpMsgKeyExtract(
            datapath=datapath,
            command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
            fields=[ofproto.OXM_OF_IPV4_SRC],
            table_id=0)
        datapath.send_msg(req)
        """ ARP packets flooding """
        match = ofparser.OFPMatch(eth_type=0x0806)
        actions = [ofparser.OFPActionOutput(ofproto.OFPP_FLOOD)]
        self.add_flow(datapath=datapath,
                      table_id=0,
                      priority=100,
                      match=match,
                      actions=actions)
        """ Flow entries for port knocking """
        for i in range(len(port_list)):
            match = ofparser.OFPMatch(eth_type=0x0800,
                                      ip_proto=17,
                                      state=i,
                                      udp_dst=port_list[i])

            if port_list[i] != final_port and port_list[i] != second_last_port:
                # If state not OPEN, set state and drop (implicit)
                actions = [
                    osparser.OFPExpActionSetState(state=i + 1,
                                                  table_id=0,
                                                  idle_timeout=5)
                ]
            elif port_list[i] == second_last_port:
                # In the transaction to the OPEN state, the timeout is set to 10 sec
                actions = [
                    osparser.OFPExpActionSetState(state=i + 1,
                                                  table_id=0,
                                                  idle_timeout=10)
                ]
            else:
                actions = [ofparser.OFPActionOutput(2)]
            self.add_flow(datapath=datapath,
                          table_id=0,
                          priority=10,
                          match=match,
                          actions=actions)
        """ Get back to DEFAULT if wrong knock (UDP match, lowest priority) """
        match = ofparser.OFPMatch(eth_type=0x0800, ip_proto=17)
        actions = [osparser.OFPExpActionSetState(state=0, table_id=0)]
        self.add_flow(datapath=datapath,
                      table_id=0,
                      priority=0,
                      match=match,
                      actions=actions)
        """ Test port 1300, always forward on port 2 """
        match = ofparser.OFPMatch(eth_type=0x0800, ip_proto=17, udp_dst=1300)
        actions = [ofparser.OFPActionOutput(2)]
        self.add_flow(datapath=datapath,
                      table_id=0,
                      priority=10,
                      match=match,
                      actions=actions)
示例#3
0
 def send_table_mod(self, datapath):
     req = osparser.OFPExpMsgConfigureStatefulTable(datapath=datapath,
                                                    table_id=0,
                                                    stateful=1)
     datapath.send_msg(req)
示例#4
0
	def install_function(self, datapath):

		""" Set table 0 as stateful """	
		req = osparser.OFPExpMsgConfigureStatefulTable(
				datapath=datapath,
				table_id=0,
				stateful=1)
		datapath.send_msg(req)

		""" Set table 1 as stateful, tabella degli stati usata per le porte libere"""	
		req = osparser.OFPExpMsgConfigureStatefulTable(
				datapath=datapath,
				table_id=1,
				stateful=1)
		datapath.send_msg(req)

		""" Set table 2 restore """	
		req = osparser.OFPExpMsgConfigureStatefulTable(
				datapath=datapath,
				table_id=2,
				stateful=1)
		datapath.send_msg(req)

		""" Set table 3 translate """
		req = osparser.OFPExpMsgConfigureStatefulTable(
				datapath=datapath,
				table_id=3,
				stateful=1)
		datapath.send_msg(req)


	############################### LOOKUP/UPDATE ###################################
		""" Tab0 """
		""" Set lookup extractor = {BiFlow} """ 
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_IPV4_DST,
						ofproto.OXM_OF_IP_PROTO, ofproto.OXM_OF_TCP_SRC,
						ofproto.OXM_OF_TCP_DST],
				table_id=0,
				flag_L = 1)
		datapath.send_msg(req)
 
		""" Set lookup extractor = {BiFlow} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_IPV4_DST,
						ofproto.OXM_OF_IP_PROTO, ofproto.OXM_OF_TCP_SRC,
						ofproto.OXM_OF_TCP_DST],
				table_id=0,
				flag_L = 1)
		datapath.send_msg(req)

		""" Tab1 """
		""" Set lookup extractor = {OXM_OF_METADATA} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
				fields=[ofproto.OXM_OF_METADATA],
				table_id=1)
		datapath.send_msg(req)

		""" Set update extractor = {OXM_OF_METADATA}  """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
				fields=[ofproto.OXM_OF_METADATA],
				table_id=1)
		datapath.send_msg(req)


		""" Tab2 """
		""" Set lookup extractor = {OXM_OF_IPV4_SRC, OXM_OF_IP_PROTO, OXM_OF_TCP_SRC} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_IP_PROTO,
						ofproto.OXM_OF_TCP_SRC],
				table_id=2)
		datapath.send_msg(req)

		""" Set lookup extractor = {OXM_OF_IPV4_DST, OXM_OF_IP_PROTO, OXM_OF_TCP_DST} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_DST, ofproto.OXM_OF_IP_PROTO,
						ofproto.OXM_OF_TCP_DST],
				table_id=2)
		datapath.send_msg(req)


		""" Tab3 """
		""" Set lookup extractor = {OXM_OF_IPV4_SRC, OXM_OF_TCP_SRC} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_TCP_SRC],
				table_id=3)
		datapath.send_msg(req)

		""" Set update extractor = {OXM_OF_IPV4_SRC, OXM_OF_TCP_SRC} """
		req = osparser.OFPExpMsgKeyExtract(datapath=datapath,
				command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
				fields=[ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_TCP_SRC],
				table_id=3)
		datapath.send_msg(req)

		""" Tab4 """
		""" Stateless """

		########################### SET GD DATA VARIABLE TAB 0 ############################################


		''' GD[0] = 0''' 
		req = osparser.OFPExpMsgsSetGlobalDataVariable(
				datapath=datapath,
				table_id=0,
				global_data_variable_id=0,
				value=0)				
		datapath.send_msg(req)

		''' GD[1] = 0 '''
		req = osparser.OFPExpMsgsSetGlobalDataVariable(
				datapath=datapath,
				table_id=0,
				global_data_variable_id=0,
				value=0)				
		datapath.send_msg(req)

		
		########################### SET HF DATA VARIABLE TAB 2 ############################################

		''' HF[0] = OXM_OF_IPV4_SRC [id_pkt] '''
		req = osparser.OFPExpMsgHeaderFieldExtract(
				datapath=datapath,
				table_id=2,
				extractor_id=0,
				field=ofproto.OXM_OF_IPV4_SRC
			)
		datapath.send_msg(req)

		''' HF[1] = OXM_OF_TCP_SRC [id_pkt] '''
		req = osparser.OFPExpMsgHeaderFieldExtract(
				datapath=datapath,
				table_id=2,
				extractor_id=1,
				field=ofproto.OXM_OF_TCP_SRC
			)
		datapath.send_msg(req)


		########################### SET GD DATA VARIABLE TAB 3 ############################################


		''' GD[0] = 0''' 
		req = osparser.OFPExpMsgsSetGlobalDataVariable(
				datapath=datapath,
				table_id=3,
				global_data_variable_id=0,
				value=0)				
		datapath.send_msg(req)


		########################### SET HF DATA VARIABLE TAB 4 ############################################
		# SI PUO FARE???

		''' HF[0] = OXM_OF_METADATA [id_pkt] '''
		req = osparser.OFPExpMsgHeaderFieldExtract(
				datapath=datapath,
				table_id=4,
				extractor_id=0,
				field=ofproto.OXM_OF_METADATA
			)
		datapath.send_msg(req)


		################################# REGOLE ############################################


		''' #######################  TAB 0  '''  # tutto ok, controllare riga 7 e 11
		# Line 0
		match = ofparser.OFPMatch(state=0, in_port=1, ipv4_dst=10.0.0.0/24)
		actions = [osparser.OFPExpActionSetState(state=11, table_id=0)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=0, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=100, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 1
		match = ofparser.OFPMatch(state=0, in_port=2, ipv4_dst=8.0.0.0/24)
		actions = [osparser.OFPExpActionSetState(state=12, table_id=0)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=0, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=99, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 2
		match = ofparser.OFPMatch(state=11, in_port=1, ipv4_dst=10.0.0.0/24)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=0, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=98, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 3
		match = ofparser.OFPMatch(state=11, in_port=2, ipv4_dst=8.0.0.0/24)
		actions = [osparser.OFPExpActionSetState(state=2, table_id=0)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=1, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=97, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 4
		match = ofparser.OFPMatch(state=12, in_port=2, ipv4_dst=8.0.0.0/24)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=0, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=96, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 5
		match = ofparser.OFPMatch(state=12, in_port=1, ipv4_dst=10.0.0.0/24)
		actions = [osparser.OFPExpActionSetState(state=2, table_id=0)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=1, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=95, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 6
		match = ofparser.OFPMatch(state=2)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=1, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=94, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 7
		match = ofparser.OFPMatch(state=0, in_port=0, ipv4_dst=10.0.0.1, tcp_dst=80)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=0),
				   osparser.OFPExpActionSetDataVariable(table_id=0, opcode=osproto.OPCODE_SUM, output_gd_id=0, operand_1_gd_id=0, operand_2_cost=1)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=G0, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(3)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=93, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 8
		match = ofparser.OFPMatch(state=1, in_port=0, ipv4_dst=10.0.0.1, tcp_dst=80)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(3)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=92, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 9
		match = ofparser.OFPMatch(state=0, in_port=2, ipv4_src=10.0.0.2, tcp_src=80)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=91, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 10
		match = ofparser.OFPMatch(state=0, in_port=2, ipv4_src=10.0.0.3, tcp_src=80)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=90, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 11 VEDERE PROBLEMA DEL SET METADATA 16-31
		match = ofparser.OFPMatch(state=0, in_port=2)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=0),
				   osparser.OFPExpActionSetDataVariable(table_id=0, opcode=osproto.OPCODE_SUM, output_gd_id=1, operand_1_gd_id=1, operand_2_cost=1)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=G1, metadata_mask=0x0FFFF0000),
			ofparser.OFPInstructionGotoTable(1)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=89, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 12
		match = ofparser.OFPMatch(state=1, in_port=2)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(3)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=88, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 13
		match = ofparser.OFPMatch(state=0, in_port=0, ipv4_dst=10.0.0.1)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(2)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=0,
								priority=87, match=match, instructions=inst)
		datapath.send_msg(mod)


		''' #######################  TAB 1 estrae la porta  ''' #controllare riga 0

		# Line 0 
		match = ofparser.OFPMatch(in_port=2)
		actions = []
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionWriteMetadata(metadata=state_label, metadata_mask=0xFFFFFFFF),
			ofparser.OFPInstructionGotoTable(2)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=1,
								priority=100, match=match, instructions=inst)
		datapath.send_msg(mod)


		''' #######################  TAB 2 restore'''

		# Line 0
		# ip.src -> R0 => HF[0] -> FD[0] => FD[0] = HF[0] + 0
		# tcp.src -> R1 => HF[1] -> FD[1] => FD[1] = HF[1] + 0
		match = ofparser.OFPMatch(state=0, in_port=2)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=2),
				   osparser.OFPExpActionSetDataVariable(table_id=2, opcode=osproto.OPCODE_SUM, output_fd_id=0, operand_1_hd_id=0, operand_2_cost=0),
				   osparser.OFPExpActionSetDataVariable(table_id=2, opcode=osproto.OPCODE_SUM, output_fd_id=1, operand_1_hd_id=1, operand_2_cost=0)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(3)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=2,
								priority=100, match=match, instructions=inst)
		datapath.send_msg(mod)


		# Line 1
		# ip.dst = R0 => IPV4_DST = FD[0] 
		# tcp.dst = R1 => TCP_DST = FD[1]
		match = ofparser.OFPMatch(state=1, in_port=0)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=2),
				   osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=0,dst_field=ofproto.OXM_OF_IPV4_DST),
				   osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=1,dst_field=ofproto.OXM_OF_TCP_DST)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=2,
								priority=99, match=match, instructions=inst)
		datapath.send_msg(mod)


		''' #######################  TAB 3 translate ''' # Controllare Riga 3

		# Line 0
		# ip.dst = 10.0.0.2 
		# tcp.dst = 80
		# 10.0.0.2 -> R0 => 10.0.0.2 -> FD[0] => FD[0] = GD[0] + 10.0.0.2 => 0 + 10.0.0.2
		# 80 -> R1 		 => 80 -> FD[1] 	  => GD[0] + 80 			  => 0 + 80
		match = ofparser.OFPMatch(state=0, in_port=0, metadata=0, metadata_mask=0x00000000F)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=3),
				   ofparser.OFPActionSetField(ipv4_dst=10.0.0.2),
				   ofparser.OFPActionSetField(tcp_dst=80),
				   osparser.OFPExpActionSetDataVariable(table_id=3, opcode=osproto.OPCODE_SUM, output_fd_id=0, operand_1_gd_id=0, operand_2_cost=10.0.0.2),
				   osparser.OFPExpActionSetDataVariable(table_id=3, opcode=osproto.OPCODE_SUM, output_fd_id=1, operand_1_gd_id=0, operand_2_cost=80)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=3,
								priority=100, match=match, instructions=inst)
		datapath.send_msg(mod)


		# Line 1
		# ip.dst = 10.0.0.3 
		# tcp.dst = 80
		# 10.0.0.3 -> R0 => 10.0.0.3 -> FD[0] => FD[0] = GD[0] + 10.0.0.3 => 0 + 10.0.0.3
		# 80 -> R1 		 => 80 -> FD[1] 	  => GD[0] + 80 			  => 0 + 80
		match = ofparser.OFPMatch(state=0, in_port=0, metadata=1, metadata_mask=0x00000000F)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=3),
				   ofparser.OFPActionSetField(ipv4_dst=10.0.0.3),
				   ofparser.OFPActionSetField(tcp_dst=80),
				   osparser.OFPExpActionSetDataVariable(table_id=3, opcode=osproto.OPCODE_SUM, output_fd_id=0, operand_1_gd_id=0, operand_2_cost=10.0.0.2),
				   osparser.OFPExpActionSetDataVariable(table_id=3, opcode=osproto.OPCODE_SUM, output_fd_id=1, operand_1_gd_id=0, operand_2_cost=80)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=3,
								priority=99, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 2 
		# ip.dst = R0 => IPV4_DST = FD[0]
		# tcp.dst = R1 => TCP_DST = FD[1]
		match = ofparser.OFPMatch(state=1, in_port=0)
		actions = [osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=0,dst_field=ofproto.OXM_OF_IPV4_DST),
				   osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=1,dst_field=ofproto.OXM_OF_TCP_DST)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=3,
								priority=98, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 3 	DEVO SCRIVERE METADATA su una variabile in quealche modo
		# metadata(b16,b31) -> R1 => metadata(b16,b31) -> FD[1] => FD[1] = metadata(b16,b31)
		# ip.src = 10.0.0.1
		# tcp.src = R1 => TCP_SRC = FD[1]
		match = ofparser.OFPMatch(state=0, in_port=2)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=3),
				   
				   #Inserire riga per scrivere metadata in FD[1]
				   # osparser.OFPExpActionSetDataVariable(table_id=4, opcode=osproto.OPCODE_SUM, output_fd_id=1, operand_1_hf_id=0, operand_2_cost=0)]

				   ofparser.OFPActionSetField(ipv4_src=10.0.0.1),
				   osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=1,dst_field=ofproto.OXM_OF_TCP_SRC)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=3,
								priority=97, match=match, instructions=inst)
		datapath.send_msg(mod)

		# Line 4
		# ip.src = 10.0.0.1
		# tcp.src = R1 => TCP_SRC = FD[1]
		match = ofparser.OFPMatch(state=1, in_port=2)
		actions = [osparser.OFPExpActionSetState(state=1, table_id=3),
				   ofparser.OFPActionSetField(ipv4_src=10.0.0.1),
				   osparser.OFPExpActionWriteContextToField(src_type=osproto.SOURCE_TYPE_FLOW_DATA_VAR,src_id=1,dst_field=ofproto.OXM_OF_TCP_SRC)]
		inst = [ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,actions),
			ofparser.OFPInstructionGotoTable(4)]
		mod = ofparser.OFPFlowMod(datapath=datapath, table_id=3,
								priority=96, match=match, instructions=inst)
		datapath.send_msg(mod)


		''' #######################  TAB 4 forward ''' # Controllare Riga 3
		
		# Line 0
		match = ofparser.OFPMatch(in_port=1, metadata = 0, metadata_mask=0x00000000F, ipv4_dst=10.0.0.0/24)
		actions = []
		self.add_flow(datapath=datapath, table_id=4, priority=100,
						match=match, actions=actions)

		# Line 1
		match = ofparser.OFPMatch(in_port=1, metadata = 1, metadata_mask=0x00000000F, ipv4_dst=10.0.0.0/24)
		actions = [ofparser.OFPActionOutput(2)]
		self.add_flow(datapath=datapath, table_id=4, priority=99,
						match=match, actions=actions)

		# Line 2
		match = ofparser.OFPMatch(ipv4_dst=8.0.0.0/24)
		actions = [ofparser.OFPActionOutput(1)]
		self.add_flow(datapath=datapath, table_id=4, priority=98,
						match=match, actions=actions)

		# Line 3
		match = ofparser.OFPMatch(ipv4_dst=10.0.0.0/24)
		actions = [ofparser.OFPActionOutput(2)]
		self.add_flow(datapath=datapath, table_id=4, priority=97,
						match=match, actions=actions)

		# Line 4
		match = ofparser.OFPMatch(in_port=2, ipv4_src=10.0.0.2, tcp_src=80)
		actions = [ofparser.OFPActionSetField(ipv4_src=1.0.0.1),
				   ofparser.OFPActionSetField(tcp_src=80),
				   ofparser.OFPActionOutput(0)]
		self.add_flow(datapath=datapath, table_id=4, priority=96,
						match=match, actions=actions)

		# Line 5
		match = ofparser.OFPMatch(in_port=2, ipv4_src=10.0.0.3, tcp_src=80)
		actions = [ofparser.OFPActionSetField(ipv4_src=1.0.0.1),
				   ofparser.OFPActionSetField(tcp_src=80),
				   ofparser.OFPActionOutput(0)]
		self.add_flow(datapath=datapath, table_id=4, priority=95,
						match=match, actions=actions)

		# Line 6
		match = ofparser.OFPMatch()
		actions = [ofparser.OFPActionOutput(0)]
		self.add_flow(datapath=datapath, table_id=4, priority=94,
						match=match, actions=actions)
示例#5
0
    def switch_features_handler(self, ev):
        
        msg = ev.msg
        datapath = msg.datapath

        LOG.info("Configuring switch %d..." % datapath.id)

        """ Set table 0 as stateful """
        req = osparser.OFPExpMsgConfigureStatefulTable(datapath=datapath, 
                                                    table_id=0, 
                                                    stateful=1)
        datapath.send_msg(req)

        """ Set lookup extractor = {ip_src, ip_dst, tcp_src, tcp_dst} """
        req = osparser.OFPExpMsgKeyExtract(datapath=datapath, 
                                                command=osproto.OFPSC_EXP_SET_L_EXTRACTOR, 
                                                fields=[ofproto.OXM_OF_IPV4_SRC,ofproto.OXM_OF_IPV4_DST,ofproto.OXM_OF_TCP_SRC,ofproto.OXM_OF_TCP_DST], 
                                                table_id=0)
        datapath.send_msg(req)

        """ Set update extractor = {ip_src, ip_dst, tcp_src, tcp_dst} (same as lookup) """
        req = osparser.OFPExpMsgKeyExtract(datapath=datapath, 
                                                command=osproto.OFPSC_EXP_SET_U_EXTRACTOR, 
                                                fields=[ofproto.OXM_OF_IPV4_SRC,ofproto.OXM_OF_IPV4_DST,ofproto.OXM_OF_TCP_SRC,ofproto.OXM_OF_TCP_DST], 
                                                table_id=0)
        datapath.send_msg(req)

        """ Group table setup """
        buckets = []
        # Action Bucket: <PWD port_i , SetState(i-1)
        for port in range(2,SWITCH_PORTS+1):
            max_len = 2000
            dest_ip=self.int_to_ip_str(port)
            dest_eth=self.int_to_mac_str(port)
            dest_tcp=(port)*100
            actions = [ osparser.OFPExpActionSetState(state=port, table_id=0),
                        ofparser.OFPActionSetField(ipv4_dst=dest_ip),
                        ofparser.OFPActionSetField(eth_dst=dest_eth),
                        ofparser.OFPActionSetField(tcp_dst=dest_tcp),
                        ofparser.OFPActionOutput(port=port, max_len=max_len) ]

            buckets.append(ofparser.OFPBucket(weight=100, 
                                                watch_port=ofproto.OFPP_ANY, 
                                                watch_group=ofproto.OFPG_ANY,
                                                actions=actions))

        req = ofparser.OFPGroupMod(datapath=datapath, 
                                     command=ofproto.OFPGC_ADD,
                                     type_=ofproto.OFPGT_SELECT, 
                                     group_id=1, 
                                     buckets=buckets)
        datapath.send_msg(req)
        

        
        """ ARP packets flooding """
        match = ofparser.OFPMatch(eth_type=0x0806)
        actions = [ofparser.OFPActionOutput(port=ofproto.OFPP_FLOOD)]
        self.add_flow(datapath=datapath, table_id=0, priority=100,
                        match=match, actions=actions)

        """ Reverse path flow """
        for in_port in range(2, SWITCH_PORTS + 1):
            src_ip=self.int_to_ip_str(in_port)
            src_eth=self.int_to_mac_str(in_port)
            src_tcp=in_port*100
            # we need to match an IPv4 (0x800) TCP (6) packet to do SetField()
            match = ofparser.OFPMatch(in_port=in_port, eth_type=0x800, ip_proto=6, ipv4_src=src_ip,eth_src=src_eth,tcp_src=src_tcp)
            actions = [ofparser.OFPActionSetField(ipv4_src="10.0.0.2"),
                       ofparser.OFPActionSetField(eth_src="00:00:00:00:00:02"),
                       ofparser.OFPActionSetField(tcp_src=80),
                       ofparser.OFPActionOutput(port=1, max_len=0)]                   
            self.add_flow(datapath=datapath, table_id=0, priority=100,
                    match=match, actions=actions)

        """ Forwarding consistency rules"""
        match = ofparser.OFPMatch(in_port=1, state=0, eth_type=0x800, ip_proto=6)
        actions = [ofparser.OFPActionGroup(1)]
        self.add_flow(datapath=datapath, table_id=0, priority=100,
                match=match, actions=actions)

        for state in range(2,SWITCH_PORTS+1):
            dest_ip=self.int_to_ip_str(state)
            dest_eth=self.int_to_mac_str(state)
            dest_tcp=(state)*100
            match = ofparser.OFPMatch(in_port=1, state=state, eth_type=0x800, ip_proto=6)
            actions = [ ofparser.OFPActionSetField(ipv4_dst=dest_ip),
                        ofparser.OFPActionSetField(eth_dst=dest_eth),
                        ofparser.OFPActionSetField(tcp_dst=dest_tcp),
                        ofparser.OFPActionOutput(port=state, max_len=0)]        
            self.add_flow(datapath=datapath, table_id=0, priority=100,
                    match=match, actions=actions)
示例#6
0
    def switch_features_handler(self, event):
        """ Switche sent his features, check if OpenState supported """
        msg = event.msg
        datapath = msg.datapath

        LOG.info("Configuring switch %d..." % datapath.id)

        for table in range(0, 2):
            """ Set tables as stateful """
            req = osparser.OFPExpMsgConfigureStatefulTable(datapath=datapath,
                                                           table_id=table,
                                                           stateful=1)
            datapath.send_msg(req)
            """ Set lookup extractor = {ip_src, ip_dst, tcp_src, tcp_dst} """
            req = osparser.OFPExpMsgKeyExtract(
                datapath=datapath,
                command=osproto.OFPSC_EXP_SET_L_EXTRACTOR,
                fields=[
                    ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_IPV4_DST,
                    ofproto.OXM_OF_TCP_SRC, ofproto.OXM_OF_TCP_DST
                ],
                table_id=table)
            datapath.send_msg(req)
            """ Set update extractor = {ip_src, ip_dst, tcp_src, tcp_dst} (same as lookup) """
            req = osparser.OFPExpMsgKeyExtract(
                datapath=datapath,
                command=osproto.OFPSC_EXP_SET_U_EXTRACTOR,
                fields=[
                    ofproto.OXM_OF_IPV4_SRC, ofproto.OXM_OF_IPV4_DST,
                    ofproto.OXM_OF_TCP_SRC, ofproto.OXM_OF_TCP_DST
                ],
                table_id=table)
            datapath.send_msg(req)
        """ Configure meter 1 """
        b1 = ofparser.OFPMeterBandDscpRemark(rate=10, prec_level=1)
        req = ofparser.OFPMeterMod(datapath,
                                   command=ofproto.OFPMC_ADD,
                                   flags=ofproto.OFPMF_PKTPS,
                                   meter_id=1,
                                   bands=[b1])
        datapath.send_msg(req)
        """ Table 0 """
        match = ofparser.OFPMatch(eth_type=0x0800,
                                  ipv4_dst="10.0.0.2",
                                  state=0)
        actions = [
            osparser.OFPExpActionSetState(state=1, table_id=0, idle_timeout=30)
        ]
        inst = [
            ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                           actions),
            ofparser.OFPInstructionMeter(meter_id=1),
            ofparser.OFPInstructionGotoTable(table_id=1)
        ]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=0,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)

        match = ofparser.OFPMatch(eth_type=0x0800,
                                  ipv4_dst="10.0.0.2",
                                  state=1)
        inst = [ofparser.OFPInstructionGotoTable(table_id=1)]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=0,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)

        match = ofparser.OFPMatch(eth_type=0x0800, ipv4_dst="10.0.0.1")
        actions = [ofparser.OFPActionOutput(1)]
        inst = [
            ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                           actions)
        ]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=0,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)
        """ Table 1 """
        match = ofparser.OFPMatch(state=0,
                                  eth_type=0x0800,
                                  ipv4_dst="10.0.0.2",
                                  ip_dscp=10)
        actions = [ofparser.OFPActionOutput(2)]
        inst = [
            ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                           actions)
        ]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=1,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)

        match = ofparser.OFPMatch(eth_type=0x0800,
                                  ipv4_dst="10.0.0.2",
                                  ip_dscp=12)
        actions = [
            osparser.OFPExpActionSetState(state=1, table_id=1, idle_timeout=30)
        ]
        inst = [
            ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                           actions)
        ]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=1,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)

        match = ofparser.OFPMatch(state=1,
                                  eth_type=0x0800,
                                  ipv4_dst="10.0.0.2",
                                  ip_dscp=10)
        actions = []
        inst = [
            ofparser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                           actions)
        ]
        mod = ofparser.OFPFlowMod(datapath=datapath,
                                  table_id=1,
                                  priority=10,
                                  match=match,
                                  instructions=inst)
        datapath.send_msg(mod)