def bad_fetch(nzo, url, msg='', content=False): """ Create History entry for failed URL Fetch msg : message to be logged retry : make retry link in history content : report in history that cause is a bad NZB file """ if msg: msg = unicoder(msg) else: msg = '' nzo.status = Status.FAILED if url: nzo.filename = url nzo.final_name = url.strip() if content: # Bad content msg = T('Unusable NZB file') else: # Failed fetch msg = T('URL Fetching failed; %s') % msg nzo.fail_msg = msg growler.send_notification( T('URL Fetching failed; %s') % '', '%s\n%s' % (msg, url), 'other') if cfg.email_endjob() > 0: emailer.badfetch_mail(msg, url) NzbQueue.do.remove(nzo.nzo_id, add_to_history=True)
def bad_fetch(nzo, url, msg='', content=False): """ Create History entry for failed URL Fetch msg : message to be logged retry : make retry link in history content : report in history that cause is a bad NZB file """ if msg: msg = unicoder(msg) else: msg = '' nzo.status = Status.FAILED if url: nzo.filename = url nzo.final_name = url.strip() if content: # Bad content msg = T('Unusable NZB file') else: # Failed fetch msg = T('URL Fetching failed; %s') % msg nzo.fail_msg = msg growler.send_notification(T('URL Fetching failed; %s') % '', '%s\n%s' % (msg, url), 'other') if cfg.email_endjob() > 0: emailer.badfetch_mail(msg, url) NzbQueue.do.remove(nzo.nzo_id, add_to_history=True)
def add(self, nzo, save=True, quiet=False): assert isinstance(nzo, NzbObject) if not nzo.nzo_id: nzo.nzo_id = sabnzbd.get_new_id('nzo', nzo.workpath, self.__nzo_table) # If no files are to be downloaded anymore, send to postproc if not nzo.files and not nzo.futuretype: self.end_job(nzo) return '' # Reset try_lists nzo.reset_try_list() self.reset_try_list() if nzo.nzo_id: nzo.deleted = False priority = nzo.priority if sabnzbd.scheduler.analyse(False, priority): nzo.status = Status.PAUSED self.__nzo_table[nzo.nzo_id] = nzo if priority > HIGH_PRIORITY: # Top and repair priority items are added to the top of the queue self.__nzo_list.insert(0, nzo) elif priority == LOW_PRIORITY: self.__nzo_list.append(nzo) else: # for high priority we need to add the item at the bottom # of any other high priority items above the normal priority # for normal priority we need to add the item at the bottom # of the normal priority items above the low priority if self.__nzo_list: pos = 0 added = False for position in self.__nzo_list: if position.priority < priority: self.__nzo_list.insert(pos, nzo) added = True break pos += 1 if not added: # if there are no other items classed as a lower priority # then it will be added to the bottom of the queue self.__nzo_list.append(nzo) else: # if the queue is empty then simple append the item to the bottom self.__nzo_list.append(nzo) if save: self.save(nzo) if not (quiet or nzo.status in ('Fetching', )): growler.send_notification(T('NZB added to queue'), nzo.filename, 'download') if cfg.auto_sort(): self.sort_by_avg_age() return nzo.nzo_id
def parring(nzo, workdir): """ Perform par processing. Returns: (par_error, re_add) """ filename = nzo.final_name growler.send_notification(T('Post-processing'), nzo.final_name, 'pp') logging.info('Par2 check starting on %s', filename) ## Collect the par files if nzo.partable: par_table = nzo.partable.copy() else: par_table = {} repair_sets = par_table.keys() re_add = False par_error = False if repair_sets: for set_ in repair_sets: logging.info("Running repair on set %s", set_) parfile_nzf = par_table[set_] need_re_add, res = par2_repair(parfile_nzf, nzo, workdir, set_) if need_re_add: re_add = True else: par_error = par_error or not res if re_add: logging.info('Readded %s to queue', filename) nzo.priority = REPAIR_PRIORITY sabnzbd.nzbqueue.add_nzo(nzo) sabnzbd.downloader.Downloader.do.resume_from_postproc() logging.info('Par2 check finished on %s', filename) if (par_error and not re_add) or not repair_sets: # See if alternative SFV check is possible if cfg.sfv_check(): sfvs = globber(workdir, '*.sfv') else: sfvs = None if sfvs: par_error = False nzo.set_unpack_info('Repair', T('Trying SFV verification')) for sfv in sfvs: if not sfv_check(sfv): nzo.set_unpack_info('Repair', T('Some files failed to verify against "%s"') % unicoder(os.path.basename(sfv))) par_error = True if not par_error: nzo.set_unpack_info('Repair', T('Verified successfully using SFV files')) elif not repair_sets: logging.info("No par2 sets for %s", filename) nzo.set_unpack_info('Repair', T('[%s] No par2 sets') % unicoder(filename)) if not par_error: verified_flag_file(workdir, create=True) return par_error, re_add
def parring(nzo, workdir): """ Perform par processing. Returns: (par_error, re_add) """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) filename = nzo.final_name growler.send_notification(T('Post-processing'), nzo.final_name, 'pp') logging.info('Par2 check starting on %s', filename) ## Get verification status of sets verified = sabnzbd.load_data(VERIFIED_FILE, nzo.workpath, remove=False) or {} ## Collect the par files if nzo.partable: par_table = nzo.partable.copy() else: par_table = {} repair_sets = par_table.keys() re_add = False par_error = False if repair_sets: for setname in repair_sets: if cfg.ignore_samples() > 0 and 'sample' in setname.lower(): continue if not verified.get(setname, False): logging.info("Running repair on set %s", setname) parfile_nzf = par_table[setname] if not os.path.exists( os.path.join(nzo.downpath, parfile_nzf.filename)): continue need_re_add, res = par2_repair(parfile_nzf, nzo, workdir, setname) re_add = re_add or need_re_add if not res and not need_re_add and cfg.sfv_check(): res = try_sfv_check(nzo, workdir, setname) verified[setname] = res par_error = par_error or not res else: logging.info("No par2 sets for %s", filename) nzo.set_unpack_info('Repair', T('[%s] No par2 sets') % unicoder(filename)) if cfg.sfv_check(): par_error = not try_sfv_check(nzo, workdir, '') verified[''] = not par_error if re_add: logging.info('Readded %s to queue', filename) if nzo.priority != TOP_PRIORITY: nzo.priority = REPAIR_PRIORITY sabnzbd.nzbqueue.add_nzo(nzo) sabnzbd.downloader.Downloader.do.resume_from_postproc() sabnzbd.save_data(verified, VERIFIED_FILE, nzo.workpath) logging.info('Par2 check finished on %s', filename) return par_error, re_add
def versionUpdate(self): try: if sabnzbd.NEW_VERSION and self.version_notify: #logging.info("[osx] New Version : %s" % (sabnzbd.NEW_VERSION)) new_release, new_rel_url = sabnzbd.NEW_VERSION.split(';') growler.send_notification("SABnzbd","%s : %s" % (T('New release available'), new_release), 'other') self.version_notify = 0 except : logging.info("[osx] versionUpdate Exception %s" % (sys.exc_info()[0]))
def add(self, nzo, save=True, quiet=False): assert isinstance(nzo, NzbObject) if not nzo.nzo_id: nzo.nzo_id = sabnzbd.get_new_id('nzo', nzo.workpath, self.__nzo_table) # If no files are to be downloaded anymore, send to postproc if not nzo.files and not nzo.futuretype: self.end_job(nzo) return '' # Reset try_lists nzo.reset_try_list() self.reset_try_list() if nzo.nzo_id: nzo.deleted = False priority = nzo.priority if sabnzbd.scheduler.analyse(False, priority): nzo.status = Status.PAUSED self.__nzo_table[nzo.nzo_id] = nzo if priority > HIGH_PRIORITY: # Top and repair priority items are added to the top of the queue self.__nzo_list.insert(0, nzo) elif priority == LOW_PRIORITY: self.__nzo_list.append(nzo) else: # for high priority we need to add the item at the bottom # of any other high priority items above the normal priority # for normal priority we need to add the item at the bottom # of the normal priority items above the low priority if self.__nzo_list: pos = 0 added = False for position in self.__nzo_list: if position.priority < priority: self.__nzo_list.insert(pos, nzo) added = True break pos += 1 if not added: # if there are no other items classed as a lower priority # then it will be added to the bottom of the queue self.__nzo_list.append(nzo) else: # if the queue is empty then simple append the item to the bottom self.__nzo_list.append(nzo) if save: self.save(nzo) if not (quiet or nzo.status in ('Fetching',)): growler.send_notification(T('NZB added to queue'), nzo.filename, 'download') if cfg.auto_sort(): self.sort_by_avg_age() return nzo.nzo_id
def parring(nzo, workdir): """ Perform par processing. Returns: (par_error, re_add) """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) filename = nzo.final_name growler.send_notification(T('Post-processing'), nzo.final_name, 'pp') logging.info('Par2 check starting on %s', filename) ## Get verification status of sets verified = sabnzbd.load_data(VERIFIED_FILE, nzo.workpath, remove=False) or {} ## Collect the par files if nzo.partable: par_table = nzo.partable.copy() else: par_table = {} repair_sets = par_table.keys() re_add = False par_error = False single = len(repair_sets) == 1 if repair_sets: for setname in repair_sets: if cfg.ignore_samples() > 0 and 'sample' in setname.lower(): continue if not verified.get(setname, False): logging.info("Running repair on set %s", setname) parfile_nzf = par_table[setname] if os.path.exists(os.path.join(nzo.downpath, parfile_nzf.filename)) or parfile_nzf.extrapars: need_re_add, res = par2_repair(parfile_nzf, nzo, workdir, setname, single=single) re_add = re_add or need_re_add if not res and not need_re_add and cfg.sfv_check(): res = try_sfv_check(nzo, workdir, setname) verified[setname] = res else: continue par_error = par_error or not res else: logging.info("No par2 sets for %s", filename) nzo.set_unpack_info('Repair', T('[%s] No par2 sets') % unicoder(filename)) if cfg.sfv_check(): par_error = not try_sfv_check(nzo, workdir, '') verified[''] = not par_error if re_add: logging.info('Readded %s to queue', filename) if nzo.priority != TOP_PRIORITY: nzo.priority = REPAIR_PRIORITY sabnzbd.nzbqueue.add_nzo(nzo) sabnzbd.downloader.Downloader.do.resume_from_postproc() sabnzbd.save_data(verified, VERIFIED_FILE, nzo.workpath) logging.info('Par2 check finished on %s', filename) return par_error, re_add
def pause(self, save=True): """ Pause the downloader, optionally saving admin """ if not self.paused: self.paused = True logging.info("Pausing") growler.send_notification("SABnzbd", T('Paused'), 'download') if self.is_paused(): BPSMeter.do.reset() if cfg.autodisconnect(): self.disconnect() if save: sabnzbd.save_state()
def run(self): """ Process the queue (including waits and retries) """ from sabnzbd.nzbqueue import NzbQueue self.shutdown = False while not self.shutdown: time.sleep(5) (msgid, nzo) = self.queue.get() if self.shutdown or not msgid: break if nzo.wait and nzo.wait > time.time(): self.grab(msgid, nzo) continue logging.debug("Popping msgid %s", msgid) filename, data, newzbin_cat, nzo_info = _grabnzb(msgid) if filename and data: filename = name_fixer(filename) pp = nzo.pp script = nzo.script cat = nzo.cat if cat == '*' or not cat: cat = cat_convert(newzbin_cat) priority = nzo.priority nzbname = nzo.custom_name cat, pp, script, priority = cat_to_opts(cat, pp, script, priority) try: sabnzbd.nzbqueue.insert_future_nzo(nzo, filename, msgid, data, pp=pp, script=script, cat=cat, priority=priority, nzbname=nzbname, nzo_info=nzo_info) nzo.url = format_source_url(str(msgid)) except: logging.error(Ta('Failed to update newzbin job %s'), msgid) logging.info("Traceback: ", exc_info = True) NzbQueue.do.remove(nzo.nzo_id, False) msgid = None else: if filename: self.grab(msgid, nzo, float(filename)) else: # Fatal error, give up on this one bad_fetch(nzo, msgid, msg=nzo_info, retry=True) msgid = None if msgid: growler.send_notification(T('NZB added to queue'), filename, 'download') logging.debug('Stopping MSGIDGrabber')
def applicationShouldTerminate_(self, sender): logging.info('[osx] application terminating') self.setMenuTitle("\n\n%s\n"% (T('Stopping...'))) self.status_item.setHighlightMode_(NO) self.osx_icon = False logging.info('[osx] application stopping daemon') sabnzbd.halt() cherrypy.engine.exit() sabnzbd.SABSTOP = True try: growler.send_notification('SABnzbd', T('SABnzbd shutdown finished'), growler.NOTIFICATION['other']) except AttributeError: # Fails for the OSX binary pass logging.info('Leaving SABnzbd') sys.stderr.flush() sys.stdout.flush() return NSTerminateNow
def check_in(self): t = time.time() if t > self.end_of_day: # current day passed. get new end of day self.end_of_day = tomorrow(t) - 1.0 if t > self.end_of_week: self.end_of_week = next_week(t) - 1.0 if t > self.end_of_month: self.end_of_month = next_month(t) - 1.0 check_time = t - (MIN * 5) # check every 5 mins if self.log_time < check_time: #logging.debug("log_time < check_time, so check IP") #time_tm = time.localtime(t) #log_time_tm = time.localtime(self.log_time) check_time_tm = time.localtime(check_time) #logging.debug(" time: %s", t) #logging.debug(" log_time: %s", self.log_time) #logging.debug("check_time: %s", check_time) #logging.debug(" time: %s", time.strftime("%a, %d %b %Y %H:%M:%S", time_tm )) #logging.debug(" log_time: %s", time.strftime("%a, %d %b %Y %H:%M:%S", log_time_tm )) #logging.debug("check_time: %s", time.strftime("%a, %d %b %Y %H:%M:%S", check_time_tm )) self.log_time = t fqn = os.uname()[1] url = 'http://automation.whatismyip.com/n09230945.asp' req = Request(url) try: response = urlopen(req) #urlopen(req, None, 10) for a 10s timeout except URLError, e: if hasattr(e, 'reason'): logging.debug( 'We failed to reach: %s', url) logging.debug( 'Reason: %s', e.reason) elif hasattr(e, 'code'): logging.debug( 'The server couldn\'t fulfill the request for %s', url) logging.debug( 'Error code: %s', e.code) else: logging.debug( 'NO URLError, read response') new_ext_ip = response.read() if check_ip(new_ext_ip): logging.info("Host %s, Checking in from IP#: %s ", fqn, new_ext_ip) if self.ext_ip == new_ext_ip: logging.debug("IP address is UNCHANGED") #tmpStr = "IP address NOT changed. Still: [%s]" % (self.ext_ip,) #growler.send_notification("SABnzbd", tmpStr, 'other') else: if self.ext_ip == "": self.ext_ip = new_ext_ip else: logging.info("IP address HAS CHANGED") tmpStr = "IP address changed from %s to %s" % (self.ext_ip, new_ext_ip) growler.send_notification("SABnzbd", tmpStr, 'other') self.ext_ip = new_ext_ip
def process_job(nzo): """ Process one job """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) start = time.time() # keep track of whether we can continue all_ok = True # keep track of par problems par_error = False # keep track of any unpacking errors unpack_error = False # Signal empty download, for when 'empty_postproc' is enabled empty = False nzb_list = [] # These need to be initialized in case of a crash workdir_complete = "" postproc_time = 0 # @UnusedVariable -- pep8 bug? script_log = "" script_line = "" crash_msg = "" # Get the job flags nzo.save_attribs() flag_repair, flag_unpack, flag_delete = nzo.repair_opts # Normalize PP if flag_delete: flag_unpack = True if flag_unpack: flag_repair = True # Get the NZB name filename = nzo.final_name if cfg.allow_streaming() and not (flag_repair or flag_unpack or flag_delete): # After streaming, force +D nzo.set_pp(3) nzo.status = Status.FAILED nzo.save_attribs() all_ok = False if nzo.fail_msg: # Special case: aborted due to too many missing data nzo.status = Status.FAILED nzo.save_attribs() all_ok = False par_error = True unpack_error = 1 try: # Get the folder containing the download result workdir = nzo.downpath tmp_workdir_complete = None # if no files are present (except __admin__), fail the job if all_ok and len(globber(workdir)) < 2: if nzo.precheck: _enough, ratio = nzo.check_quality() req_ratio = float(cfg.req_completion_rate()) / 100.0 # Make sure that rounded ratio doesn't equal required ratio # when it is actually below required if (ratio < req_ratio) and (req_ratio - ratio) < 0.001: ratio = req_ratio - 0.001 emsg = "%.1f%%" % (ratio * 100.0) emsg2 = "%.1f%%" % float(cfg.req_completion_rate()) emsg = T("Download might fail, only %s of required %s available") % (emsg, emsg2) else: emsg = T("Download failed - Not on your server(s)") empty = True nzo.fail_msg = emsg nzo.set_unpack_info("Fail", emsg) nzo.status = Status.FAILED # do not run unpacking or parity verification flag_repair = flag_unpack = False all_ok = cfg.empty_postproc() and empty if not all_ok: par_error = True unpack_error = 1 script = nzo.script cat = nzo.cat logging.info( "Starting PostProcessing on %s" + " => Repair:%s, Unpack:%s, Delete:%s, Script:%s, Cat:%s", filename, flag_repair, flag_unpack, flag_delete, script, cat, ) # Set complete dir to workdir in case we need to abort workdir_complete = workdir dirname = nzo.final_name marker_file = None # Par processing, if enabled if all_ok and flag_repair: if not check_win_maxpath(workdir): crash_msg = T('Path exceeds 260, repair by "par2" is not possible') raise WindowsError par_error, re_add = parring(nzo, workdir) if re_add: # Try to get more par files return False # Check if user allows unsafe post-processing if flag_repair and cfg.safe_postproc(): all_ok = all_ok and not par_error if all_ok: fix_unix_encoding(workdir) one_folder = False # Determine class directory if cfg.create_group_folders(): complete_dir = addPrefixes(cfg.complete_dir.get_path(), nzo.dirprefix) complete_dir = create_dirs(complete_dir) else: catdir = config.get_categories(cat).dir() if catdir.endswith("*"): catdir = catdir.strip("*") one_folder = True complete_dir = real_path(cfg.complete_dir.get_path(), catdir) complete_dir = long_path(complete_dir) # TV/Movie/Date Renaming code part 1 - detect and construct paths if cfg.enable_meta(): file_sorter = Sorter(nzo, cat) else: file_sorter = Sorter(None, cat) complete_dir = file_sorter.detect(dirname, complete_dir) if file_sorter.sort_file: one_folder = False complete_dir = sanitize_and_trim_path(complete_dir) if one_folder: workdir_complete = create_dirs(complete_dir) else: workdir_complete = get_unique_path(os.path.join(complete_dir, dirname), create_dir=True) marker_file = set_marker(workdir_complete) if not workdir_complete or not os.path.exists(workdir_complete): crash_msg = T("Cannot create final folder %s") % unicoder(os.path.join(complete_dir, dirname)) raise IOError if cfg.folder_rename() and not one_folder: tmp_workdir_complete = prefix(workdir_complete, "_UNPACK_") try: renamer(workdir_complete, tmp_workdir_complete) except: pass # On failure, just use the original name else: tmp_workdir_complete = workdir_complete newfiles = [] # Run Stage 2: Unpack if flag_unpack: if all_ok: # set the current nzo status to "Extracting...". Used in History nzo.status = Status.EXTRACTING logging.info("Running unpack_magic on %s", filename) short_complete = short_path(tmp_workdir_complete) unpack_error, newfiles = unpack_magic( nzo, short_path(workdir), short_complete, flag_delete, one_folder, (), (), (), (), () ) if short_complete != tmp_workdir_complete: newfiles = [f.replace(short_complete, tmp_workdir_complete) for f in newfiles] logging.info("unpack_magic finished on %s", filename) else: nzo.set_unpack_info("Unpack", T("No post-processing because of failed verification")) if cfg.safe_postproc(): all_ok = all_ok and not unpack_error if all_ok: # Move any (left-over) files to destination nzo.status = Status.MOVING nzo.set_action_line(T("Moving"), "...") for root, _dirs, files in os.walk(workdir): if not root.endswith(JOB_ADMIN): for file_ in files: path = os.path.join(root, file_) new_path = path.replace(workdir, tmp_workdir_complete) ok, new_path = move_to_path(path, new_path) newfiles.append(new_path) if not ok: nzo.set_unpack_info( "Unpack", T("Failed moving %s to %s") % (unicoder(path), unicoder(new_path)) ) all_ok = False break # Set permissions right set_permissions(tmp_workdir_complete) if all_ok and marker_file: del_marker(os.path.join(tmp_workdir_complete, marker_file)) remove_from_list(marker_file, newfiles) if all_ok: # Remove files matching the cleanup list cleanup_list(tmp_workdir_complete, True) # Check if this is an NZB-only download, if so redirect to queue # except when PP was Download-only if flag_repair: nzb_list = nzb_redirect( tmp_workdir_complete, nzo.final_name, nzo.pp, script, cat, priority=nzo.priority ) else: nzb_list = None if nzb_list: nzo.set_unpack_info("Download", T("Sent %s to queue") % unicoder(nzb_list)) cleanup_empty_directories(tmp_workdir_complete) else: cleanup_list(tmp_workdir_complete, False) script_output = "" script_ret = 0 if not nzb_list: # Give destination its final name if cfg.folder_rename() and tmp_workdir_complete and not one_folder: if all_ok: try: newfiles = rename_and_collapse_folder(tmp_workdir_complete, workdir_complete, newfiles) except: logging.error( T('Error renaming "%s" to "%s"'), clip_path(tmp_workdir_complete), clip_path(workdir_complete), ) logging.info("Traceback: ", exc_info=True) # Better disable sorting because filenames are all off now file_sorter.sort_file = None else: workdir_complete = tmp_workdir_complete.replace("_UNPACK_", "_FAILED_") workdir_complete = get_unique_path(workdir_complete, n=0, create_dir=False) workdir_complete = workdir_complete if empty: job_result = -1 else: job_result = int(par_error) + int(bool(unpack_error)) * 2 if cfg.ignore_samples(): remove_samples(workdir_complete) # TV/Movie/Date Renaming code part 2 - rename and move files to parent folder if all_ok and file_sorter.sort_file: if newfiles: file_sorter.rename(newfiles, workdir_complete) workdir_complete, ok = file_sorter.move(workdir_complete) else: workdir_complete, ok = file_sorter.rename_with_ext(workdir_complete) if not ok: nzo.set_unpack_info("Unpack", T("Failed to move files")) all_ok = False # Run the user script script_path = make_script_path(script) if (all_ok or not cfg.safe_postproc()) and (not nzb_list) and script_path: # set the current nzo status to "Ext Script...". Used in History nzo.status = Status.RUNNING nzo.set_action_line(T("Running script"), unicoder(script)) nzo.set_unpack_info("Script", T("Running user script %s") % unicoder(script), unique=True) script_log, script_ret = external_processing( short_path(script_path, False), short_path(workdir_complete, False), nzo.filename, dirname, cat, nzo.group, job_result, nzo.nzo_info.get("failure", ""), ) script_line = get_last_line(script_log) if script_log: script_output = nzo.nzo_id if script_line: nzo.set_unpack_info("Script", unicoder(script_line), unique=True) else: nzo.set_unpack_info("Script", T("Ran %s") % unicoder(script), unique=True) else: script = "" script_line = "" script_ret = 0 # Maybe bad script result should fail job if script_ret and cfg.script_can_fail(): script_error = True all_ok = False nzo.fail_msg = T("Script exit code is %s") % script_ret else: script_error = False # Email the results if (not nzb_list) and cfg.email_endjob(): if (cfg.email_endjob() == 1) or (cfg.email_endjob() == 2 and (unpack_error or par_error or script_error)): emailer.endjob( dirname, cat, all_ok, workdir_complete, nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, script, TRANS(script_log), script_ret, ) if script_output: # Can do this only now, otherwise it would show up in the email if script_ret: script_ret = "Exit(%s) " % script_ret else: script_ret = "" if script_line: nzo.set_unpack_info( "Script", u'%s%s <a href="./scriptlog?name=%s">(%s)</a>' % (script_ret, unicoder(script_line), urllib.quote(script_output), T("More")), unique=True, ) else: nzo.set_unpack_info( "Script", u'%s<a href="./scriptlog?name=%s">%s</a>' % (script_ret, urllib.quote(script_output), T("View script output")), unique=True, ) # Cleanup again, including NZB files if all_ok: cleanup_list(workdir_complete, False) # Force error for empty result all_ok = all_ok and not empty # Update indexer with results if cfg.rating_enable(): if nzo.encrypted > 0: Rating.do.update_auto_flag(nzo.nzo_id, Rating.FLAG_ENCRYPTED) if empty: hosts = map(lambda s: s.host, sabnzbd.downloader.Downloader.do.nzo_servers(nzo)) if not hosts: hosts = [None] for host in hosts: Rating.do.update_auto_flag(nzo.nzo_id, Rating.FLAG_EXPIRED, host) # Show final status in history if all_ok: growler.send_notification(T("Download Completed"), filename, "complete") nzo.status = Status.COMPLETED else: growler.send_notification(T("Download Failed"), filename, "failed") nzo.status = Status.FAILED except: logging.error(T("Post Processing Failed for %s (%s)"), filename, crash_msg) if not crash_msg: logging.info("Traceback: ", exc_info=True) crash_msg = T("see logfile") nzo.fail_msg = T("PostProcessing was aborted (%s)") % unicoder(crash_msg) growler.send_notification(T("Download Failed"), filename, "failed") nzo.status = Status.FAILED par_error = True all_ok = False if cfg.email_endjob(): emailer.endjob( dirname, cat, all_ok, clip_path(workdir_complete), nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, "", "", 0, ) if all_ok: # If the folder only contains one file OR folder, have that as the path # Be aware that series/generic/date sorting may move a single file into a folder containing other files workdir_complete = one_file_or_folder(workdir_complete) workdir_complete = os.path.normpath(workdir_complete) # Log the overall time taken for postprocessing postproc_time = int(time.time() - start) # Create the history DB instance history_db = database.get_history_handle() # Add the nzo to the database. Only the path, script and time taken is passed # Other information is obtained from the nzo history_db.add_history_db(nzo, clip_path(workdir_complete), nzo.downpath, postproc_time, script_log, script_line) # The connection is only used once, so close it here history_db.close() # Clean up the NZO try: logging.info("Cleaning up %s (keep_basic=%s)", filename, str(not all_ok)) sabnzbd.nzbqueue.NzbQueue.do.cleanup_nzo(nzo, keep_basic=not all_ok) except: logging.error(T("Cleanup of %s failed."), nzo.final_name) logging.info("Traceback: ", exc_info=True) # Remove download folder if all_ok: try: if os.path.exists(workdir): logging.debug("Removing workdir %s", workdir) remove_all(workdir, recursive=True) except: logging.error(T("Error removing workdir (%s)"), clip_path(workdir)) logging.info("Traceback: ", exc_info=True) # Use automatic retry link on par2 errors and encrypted/bad RARs if par_error or unpack_error in (2, 3): try_alt_nzb(nzo) return True
def resume(self): logging.info("Resuming") if self.paused: growler.send_notification("SABnzbd", T('Resuming'), 'download') self.paused = False
def process_job(nzo): """ Process one job """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) start = time.time() # keep track of whether we can continue all_ok = True # keep track of par problems par_error = False # keep track of any unpacking errors unpack_error = False # Signal empty download, for when 'empty_postproc' is enabled empty = False nzb_list = [] # These need to be initialised incase of a crash workdir_complete = '' postproc_time = 0 script_log = '' script_line = '' crash_msg = '' ## Get the job flags nzo.save_attribs() flag_repair, flag_unpack, flag_delete = nzo.repair_opts # Normalize PP if flag_delete: flag_unpack = True if flag_unpack: flag_repair = True # Get the NZB name filename = nzo.final_name msgid = nzo.msgid if cfg.allow_streaming() and not (flag_repair or flag_unpack or flag_delete): # After streaming, force +D nzo.set_pp(3) nzo.status = Status.FAILED nzo.save_attribs() all_ok = False if nzo.fail_msg: # Special case: aborted due to too many missing data nzo.status = Status.FAILED nzo.save_attribs() all_ok = False par_error = unpack_error = True try: # Get the folder containing the download result workdir = nzo.downpath tmp_workdir_complete = None # if no files are present (except __admin__), fail the job if all_ok and len(globber(workdir)) < 2: if nzo.precheck: enough, ratio = nzo.check_quality() req_ratio = float(cfg.req_completion_rate()) / 100.0 # Make sure that rounded ratio doesn't equal required ratio # when it is actually below required if (ratio < req_ratio) and (req_ratio - ratio) < 0.001: ratio = req_ratio - 0.001 emsg = '%.1f%%' % (ratio * 100.0) emsg2 = '%.1f%%' % float(cfg.req_completion_rate()) emsg = T( 'Download might fail, only %s of required %s available' ) % (emsg, emsg2) else: emsg = T('Download failed - Out of your server\'s retention?') empty = True nzo.fail_msg = emsg nzo.set_unpack_info('Fail', emsg) nzo.status = Status.FAILED # do not run unpacking or parity verification flag_repair = flag_unpack = False all_ok = cfg.empty_postproc() and empty if not all_ok: par_error = unpack_error = True script = nzo.script cat = nzo.cat logging.info('Starting PostProcessing on %s' + \ ' => Repair:%s, Unpack:%s, Delete:%s, Script:%s, Cat:%s', filename, flag_repair, flag_unpack, flag_delete, script, cat) ## Par processing, if enabled if all_ok and flag_repair: par_error, re_add = parring(nzo, workdir) if re_add: # Try to get more par files return False ## Check if user allows unsafe post-processing if flag_repair and cfg.safe_postproc(): all_ok = all_ok and not par_error # Set complete dir to workdir in case we need to abort workdir_complete = workdir dirname = nzo.final_name marker_file = None if all_ok: one_folder = False ## Determine class directory if cfg.create_group_folders(): complete_dir = addPrefixes(cfg.complete_dir.get_path(), nzo.dirprefix) complete_dir = create_dirs(complete_dir) else: catdir = config.get_categories(cat).dir() if catdir.endswith('*'): catdir = catdir.strip('*') one_folder = True complete_dir = real_path(cfg.complete_dir.get_path(), catdir) ## TV/Movie/Date Renaming code part 1 - detect and construct paths if cfg.enable_meta(): file_sorter = Sorter(nzo, cat) else: file_sorter = Sorter(None, cat) complete_dir = file_sorter.detect(dirname, complete_dir) if file_sorter.sort_file: one_folder = False if one_folder: workdir_complete = create_dirs(complete_dir) else: workdir_complete = get_unique_path(os.path.join( complete_dir, dirname), create_dir=True) marker_file = set_marker(workdir_complete) if not workdir_complete or not os.path.exists(workdir_complete): crash_msg = T('Cannot create final folder %s') % unicoder( os.path.join(complete_dir, dirname)) raise IOError if cfg.folder_rename() and not one_folder: tmp_workdir_complete = prefix(workdir_complete, '_UNPACK_') try: renamer(workdir_complete, tmp_workdir_complete) except: pass # On failure, just use the original name else: tmp_workdir_complete = workdir_complete newfiles = [] ## Run Stage 2: Unpack if flag_unpack: if all_ok: #set the current nzo status to "Extracting...". Used in History nzo.status = Status.EXTRACTING logging.info("Running unpack_magic on %s", filename) unpack_error, newfiles = unpack_magic( nzo, workdir, tmp_workdir_complete, flag_delete, one_folder, (), (), (), ()) logging.info("unpack_magic finished on %s", filename) else: nzo.set_unpack_info( 'Unpack', T('No post-processing because of failed verification')) if cfg.safe_postproc(): all_ok = all_ok and not unpack_error if all_ok: ## Move any (left-over) files to destination nzo.status = Status.MOVING nzo.set_action_line(T('Moving'), '...') for root, dirs, files in os.walk(workdir): if not root.endswith(JOB_ADMIN): for file_ in files: path = os.path.join(root, file_) new_path = path.replace(workdir, tmp_workdir_complete) ok, new_path = move_to_path(path, new_path) newfiles.append(new_path) if not ok: nzo.set_unpack_info( 'Unpack', T('Failed moving %s to %s') % (unicoder(path), unicoder(new_path))) all_ok = False break ## Set permissions right set_permissions(tmp_workdir_complete) if all_ok and marker_file: del_marker(os.path.join(tmp_workdir_complete, marker_file)) remove_from_list(marker_file, newfiles) if all_ok: ## Remove files matching the cleanup list cleanup_list(tmp_workdir_complete, True) ## Check if this is an NZB-only download, if so redirect to queue ## except when PP was Download-only if flag_repair: nzb_list = nzb_redirect(tmp_workdir_complete, nzo.final_name, nzo.pp, script, cat, priority=nzo.priority) else: nzb_list = None if nzb_list: nzo.set_unpack_info( 'Download', T('Sent %s to queue') % unicoder(nzb_list)) cleanup_empty_directories(tmp_workdir_complete) else: cleanup_list(tmp_workdir_complete, False) script_output = '' script_ret = 0 if not nzb_list: ## Give destination its final name if cfg.folder_rename() and tmp_workdir_complete and not one_folder: if all_ok: try: newfiles = rename_and_collapse_folder( tmp_workdir_complete, workdir_complete, newfiles) except: logging.error(Ta('Error renaming "%s" to "%s"'), tmp_workdir_complete, workdir_complete) logging.info('Traceback: ', exc_info=True) # Better disable sorting because filenames are all off now file_sorter.sort_file = None else: workdir_complete = tmp_workdir_complete.replace( '_UNPACK_', '_FAILED_') workdir_complete = get_unique_path(workdir_complete, n=0, create_dir=False) if empty: job_result = -1 else: job_result = int(par_error) + int(unpack_error) * 2 if cfg.ignore_samples() > 0: remove_samples(workdir_complete) ## TV/Movie/Date Renaming code part 2 - rename and move files to parent folder if all_ok and file_sorter.sort_file: if newfiles: file_sorter.rename(newfiles, workdir_complete) workdir_complete, ok = file_sorter.move(workdir_complete) else: workdir_complete, ok = file_sorter.rename_with_ext( workdir_complete) if not ok: nzo.set_unpack_info('Unpack', T('Failed to move files')) all_ok = False ## Run the user script script_path = make_script_path(script) if (all_ok or not cfg.safe_postproc()) and ( not nzb_list) and script_path: #set the current nzo status to "Ext Script...". Used in History nzo.status = Status.RUNNING nzo.set_action_line(T('Running script'), unicoder(script)) nzo.set_unpack_info('Script', T('Running user script %s') % unicoder(script), unique=True) script_log, script_ret = external_processing( script_path, workdir_complete, nzo.filename, msgid, dirname, cat, nzo.group, job_result, nzo.nzo_info.get('failure', '')) script_line = get_last_line(script_log) if script_log: script_output = nzo.nzo_id if script_line: nzo.set_unpack_info('Script', unicoder(script_line), unique=True) else: nzo.set_unpack_info('Script', T('Ran %s') % unicoder(script), unique=True) else: script = "" script_line = "" script_ret = 0 ## Email the results if (not nzb_list) and cfg.email_endjob(): if (cfg.email_endjob() == 1) or (cfg.email_endjob() == 2 and (unpack_error or par_error)): emailer.endjob(dirname, msgid, cat, all_ok, workdir_complete, nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, script, TRANS(script_log), script_ret) if script_output: # Can do this only now, otherwise it would show up in the email if script_ret: script_ret = 'Exit(%s) ' % script_ret else: script_ret = '' if script_line: nzo.set_unpack_info( 'Script', u'%s%s <a href="./scriptlog?name=%s">(%s)</a>' % (script_ret, unicoder(script_line), urllib.quote(script_output), T('More')), unique=True) else: nzo.set_unpack_info('Script', u'%s<a href="./scriptlog?name=%s">%s</a>' % (script_ret, urllib.quote(script_output), T('View script output')), unique=True) ## Cleanup again, including NZB files if all_ok: cleanup_list(workdir_complete, False) ## Remove newzbin bookmark, if any if msgid and all_ok: Bookmarks.do.del_bookmark(msgid) elif all_ok and isinstance(nzo.url, str): sabnzbd.proxy_rm_bookmark(nzo.url) ## Force error for empty result all_ok = all_ok and not empty ## Update indexer with results if nzo.encrypted > 0: Rating.do.update_auto_flag(nzo.nzo_id, Rating.FLAG_ENCRYPTED) if empty: hosts = map(lambda s: s.host, sabnzbd.downloader.Downloader.do.nzo_servers(nzo)) if not hosts: hosts = [None] for host in hosts: Rating.do.update_auto_flag(nzo.nzo_id, Rating.FLAG_EXPIRED, host) ## Show final status in history if all_ok: growler.send_notification(T('Download Completed'), filename, 'complete') nzo.status = Status.COMPLETED else: growler.send_notification(T('Download Failed'), filename, 'complete') nzo.status = Status.FAILED except: logging.error(Ta('Post Processing Failed for %s (%s)'), filename, crash_msg) if not crash_msg: logging.info("Traceback: ", exc_info=True) crash_msg = T('see logfile') nzo.fail_msg = T('PostProcessing was aborted (%s)') % unicoder( crash_msg) growler.send_notification(T('Download Failed'), filename, 'complete') nzo.status = Status.FAILED par_error = True all_ok = False if cfg.email_endjob(): emailer.endjob(dirname, msgid, cat, all_ok, workdir_complete, nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, '', '', 0) if all_ok: # If the folder only contains one file OR folder, have that as the path # Be aware that series/generic/date sorting may move a single file into a folder containing other files workdir_complete = one_file_or_folder(workdir_complete) workdir_complete = os.path.normpath(workdir_complete) # Log the overall time taken for postprocessing postproc_time = int(time.time() - start) # Create the history DB instance history_db = database.get_history_handle() # Add the nzo to the database. Only the path, script and time taken is passed # Other information is obtained from the nzo history_db.add_history_db(nzo, workdir_complete, nzo.downpath, postproc_time, script_log, script_line) # The connection is only used once, so close it here history_db.close() ## Clean up the NZO try: logging.info('Cleaning up %s (keep_basic=%s)', filename, str(not all_ok)) sabnzbd.nzbqueue.NzbQueue.do.cleanup_nzo(nzo, keep_basic=not all_ok) except: logging.error(Ta('Cleanup of %s failed.'), nzo.final_name) logging.info("Traceback: ", exc_info=True) ## Remove download folder if all_ok: try: if os.path.exists(workdir): logging.debug('Removing workdir %s', workdir) remove_all(workdir, recursive=True) except: logging.error(Ta('Error removing workdir (%s)'), workdir) logging.info("Traceback: ", exc_info=True) return True
def bad_fetch(nzo, url, msg='', retry=False, content=False): """ Create History entry for failed URL Fetch msg : message to be logged retry : make retry link in histort content : report in history that cause is a bad NZB file """ if msg: msg = unicoder(msg) else: msg = '' pp = nzo.pp if pp is None: pp = '' else: pp = '&pp=%s' % str(pp) cat = nzo.cat if cat: cat = '&cat=%s' % urllib.quote(cat) else: cat = '' script = nzo.script if script: script = '&script=%s' % urllib.quote(script) else: script = '' nzo.status = Status.FAILED if url: nzo.filename = url nzo.final_name = url.strip() if content: # Bad content msg = T('Unusable NZB file') else: # Failed fetch msg = ' (' + msg + ')' if retry: nzbname = nzo.custom_name if nzbname: nzbname = '&nzbname=%s' % urllib.quote(nzbname) else: nzbname = '' text = T('URL Fetching failed; %s') + ', <a href="./retry?session=%s&url=%s&job=%s%s%s%s%s">' + T('Try again') + '</a>' parms = (msg, cfg.api_key(), urllib.quote(url), nzo.nzo_id, pp, cat, script, nzbname) nzo.fail_msg = text % parms else: nzo.fail_msg = msg if isinstance(url, int) or url.isdigit(): url = 'Newzbin #%s' % url growler.send_notification(T('URL Fetching failed; %s') % '', '%s\n%s' % (msg, url), 'other') if cfg.email_endjob() > 0: #import sabnzbd.emailer sabnzbd.emailer.badfetch_mail(msg, url) from sabnzbd.nzbqueue import NzbQueue assert isinstance(NzbQueue.do, NzbQueue) NzbQueue.do.remove(nzo.nzo_id, add_to_history=True)
def stop(self): self.shutdown = True growler.send_notification("SABnzbd",T('Shutting down'), 'startup')
def run(self): """ Process the queue (including waits and retries) """ from sabnzbd.nzbqueue import NzbQueue self.shutdown = False while not self.shutdown: time.sleep(5) (msgid, nzo) = self.queue.get() if self.shutdown or not msgid: break if nzo.wait and nzo.wait > time.time(): self.grab(msgid, nzo) continue logging.debug("Popping msgid %s", msgid) filename, data, newzbin_cat, nzo_info = _grabnzb(msgid) if filename and data: filename = name_fixer(filename) pp = nzo.pp script = nzo.script cat = nzo.cat if cat == '*' or not cat: cat = cat_convert(newzbin_cat) priority = nzo.priority nzbname = nzo.custom_name cat, pp, script, priority = cat_to_opts( cat, pp, script, priority) try: sabnzbd.nzbqueue.insert_future_nzo(nzo, filename, msgid, data, pp=pp, script=script, cat=cat, priority=priority, nzbname=nzbname, nzo_info=nzo_info) nzo.url = format_source_url(str(msgid)) except: logging.error(Ta('Failed to update newzbin job %s'), msgid) logging.info("Traceback: ", exc_info=True) NzbQueue.do.remove(nzo.nzo_id, False) msgid = None else: if filename: self.grab(msgid, nzo, float(filename)) else: # Fatal error, give up on this one bad_fetch(nzo, msgid, msg=nzo_info, retry=True) msgid = None if msgid: growler.send_notification(T('NZB added to queue'), filename, 'download') logging.debug('Stopping MSGIDGrabber')
def parring(nzo, workdir): """ Perform par processing. Returns: (par_error, re_add) """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) filename = nzo.final_name growler.send_notification(T('Post-processing'), nzo.final_name, 'pp') logging.info('Par2 check starting on %s', filename) ## Collect the par files if nzo.partable: par_table = nzo.partable.copy() else: par_table = {} repair_sets = par_table.keys() re_add = False par_error = False if repair_sets: for set_ in repair_sets: logging.info("Running repair on set %s", set_) parfile_nzf = par_table[set_] need_re_add, res = par2_repair(parfile_nzf, nzo, workdir, set_) if need_re_add: re_add = True par_error = par_error or not res if re_add: logging.info('Readded %s to queue', filename) nzo.priority = REPAIR_PRIORITY sabnzbd.nzbqueue.add_nzo(nzo) sabnzbd.downloader.Downloader.do.resume_from_postproc() logging.info('Par2 check finished on %s', filename) if (par_error and not re_add) or not repair_sets: # See if alternative SFV check is possible if cfg.sfv_check(): sfvs = globber(workdir, '*.sfv') else: sfvs = None if sfvs: par_error = False nzo.set_unpack_info('Repair', T('Trying SFV verification')) for sfv in sfvs: failed = sfv_check(sfv) if failed: msg = T('Some files failed to verify against "%s"' ) % unicoder(os.path.basename(sfv)) msg += '; ' msg += '; '.join(failed) nzo.set_unpack_info('Repair', msg) par_error = True if not par_error: nzo.set_unpack_info('Repair', T('Verified successfully using SFV files')) elif not repair_sets: logging.info("No par2 sets for %s", filename) nzo.set_unpack_info('Repair', T('[%s] No par2 sets') % unicoder(filename)) if not par_error: flag_file(workdir, VERIFIED_FILE, create=True) return par_error, re_add
def process_job(nzo): """ Process one job """ assert isinstance(nzo, sabnzbd.nzbstuff.NzbObject) start = time.time() # keep track of whether we can continue all_ok = True # keep track of par problems par_error = False # keep track of any unpacking errors unpack_error = False # Signal empty download, for when 'empty_postproc' is enabled empty = False nzb_list = [] # These need to be initialised incase of a crash workdir_complete = '' postproc_time = 0 script_log = '' script_line = '' crash_msg = '' ## Get the job flags nzo.save_attribs() flag_repair, flag_unpack, flag_delete = nzo.repair_opts # Normalize PP if flag_delete: flag_unpack = True if flag_unpack: flag_repair = True # Get the NZB name filename = nzo.final_name msgid = nzo.msgid if cfg.allow_streaming() and not (flag_repair or flag_unpack or flag_delete): # After streaming, force +D nzo.set_pp(3) nzo.status = Status.FAILED nzo.save_attribs() all_ok = False if nzo.fail_msg: # Special case: aborted due to too many missing data nzo.status = Status.FAILED nzo.save_attribs() all_ok = False par_error = unpack_error = True try: # Get the folder containing the download result workdir = nzo.downpath tmp_workdir_complete = None # if no files are present (except __admin__), fail the job if all_ok and len(globber(workdir)) < 2: if nzo.precheck: enough, ratio = nzo.check_quality() req_ratio = float(cfg.req_completion_rate()) / 100.0 # Make sure that rounded ratio doesn't equal required ratio # when it is actually below required if (ratio < req_ratio) and (req_ratio - ratio) < 0.001: ratio = req_ratio - 0.001 emsg = '%.1f%%' % (ratio * 100.0) emsg2 = '%.1f%%' % float(cfg.req_completion_rate()) emsg = T('Download might fail, only %s of required %s available') % (emsg, emsg2) else: emsg = T('Download failed - Out of your server\'s retention?') empty = True nzo.fail_msg = emsg nzo.set_unpack_info('Fail', emsg) nzo.status = Status.FAILED # do not run unpacking or parity verification flag_repair = flag_unpack = False all_ok = cfg.empty_postproc() and empty if not all_ok: par_error = unpack_error = True script = nzo.script cat = nzo.cat logging.info('Starting PostProcessing on %s' + \ ' => Repair:%s, Unpack:%s, Delete:%s, Script:%s, Cat:%s', filename, flag_repair, flag_unpack, flag_delete, script, cat) ## Par processing, if enabled if all_ok and flag_repair: par_error, re_add = parring(nzo, workdir) if re_add: # Try to get more par files return False ## Check if user allows unsafe post-processing if flag_repair and cfg.safe_postproc(): all_ok = all_ok and not par_error # Set complete dir to workdir in case we need to abort workdir_complete = workdir dirname = nzo.final_name marker_file = None if all_ok: one_folder = False ## Determine class directory if cfg.create_group_folders(): complete_dir = addPrefixes(cfg.complete_dir.get_path(), nzo.dirprefix) complete_dir = create_dirs(complete_dir) else: catdir = config.get_categories(cat).dir() if catdir.endswith('*'): catdir = catdir.strip('*') one_folder = True complete_dir = real_path(cfg.complete_dir.get_path(), catdir) ## TV/Movie/Date Renaming code part 1 - detect and construct paths file_sorter = Sorter(cat) complete_dir = file_sorter.detect(dirname, complete_dir) if file_sorter.sort_file: one_folder = False if one_folder: workdir_complete = create_dirs(complete_dir) else: workdir_complete = get_unique_path(os.path.join(complete_dir, dirname), create_dir=True) marker_file = set_marker(workdir_complete) if not workdir_complete or not os.path.exists(workdir_complete): crash_msg = T('Cannot create final folder %s') % unicoder(os.path.join(complete_dir, dirname)) raise IOError if cfg.folder_rename() and not one_folder: tmp_workdir_complete = prefix(workdir_complete, '_UNPACK_') try: renamer(workdir_complete, tmp_workdir_complete) except: pass # On failure, just use the original name else: tmp_workdir_complete = workdir_complete newfiles = [] ## Run Stage 2: Unpack if flag_unpack: if all_ok: #set the current nzo status to "Extracting...". Used in History nzo.status = Status.EXTRACTING logging.info("Running unpack_magic on %s", filename) unpack_error, newfiles = unpack_magic(nzo, workdir, tmp_workdir_complete, flag_delete, one_folder, (), (), (), ()) logging.info("unpack_magic finished on %s", filename) else: nzo.set_unpack_info('Unpack', T('No post-processing because of failed verification')) if cfg.safe_postproc(): all_ok = all_ok and not unpack_error if all_ok: ## Move any (left-over) files to destination nzo.status = Status.MOVING nzo.set_action_line(T('Moving'), '...') for root, dirs, files in os.walk(workdir): if not root.endswith(JOB_ADMIN): for file_ in files: path = os.path.join(root, file_) new_path = path.replace(workdir, tmp_workdir_complete) ok, new_path = move_to_path(path, new_path) newfiles.append(new_path) if not ok: nzo.set_unpack_info('Unpack', T('Failed moving %s to %s') % (unicoder(path), unicoder(new_path))) all_ok = False break ## Set permissions right set_permissions(tmp_workdir_complete) if all_ok and marker_file: del_marker(os.path.join(tmp_workdir_complete, marker_file)) remove_from_list(marker_file, newfiles) if all_ok: ## Remove files matching the cleanup list cleanup_list(tmp_workdir_complete, True) ## Check if this is an NZB-only download, if so redirect to queue ## except when PP was Download-only if flag_repair: nzb_list = nzb_redirect(tmp_workdir_complete, nzo.final_name, nzo.pp, script, cat, priority=nzo.priority) else: nzb_list = None if nzb_list: nzo.set_unpack_info('Download', T('Sent %s to queue') % unicoder(nzb_list)) cleanup_empty_directories(tmp_workdir_complete) else: cleanup_list(tmp_workdir_complete, False) script_output = '' script_ret = 0 if not nzb_list: ## Give destination its final name if cfg.folder_rename() and tmp_workdir_complete and not one_folder: if all_ok: try: newfiles = rename_and_collapse_folder(tmp_workdir_complete, workdir_complete, newfiles) except: logging.error(Ta('Error renaming "%s" to "%s"'), tmp_workdir_complete, workdir_complete) logging.info('Traceback: ', exc_info = True) # Better disable sorting because filenames are all off now file_sorter.sort_file = None else: workdir_complete = tmp_workdir_complete.replace('_UNPACK_', '_FAILED_') workdir_complete = get_unique_path(workdir_complete, n=0, create_dir=False) if empty: job_result = -1 else: job_result = int(par_error) + int(unpack_error)*2 if cfg.ignore_samples() > 0: remove_samples(workdir_complete) ## TV/Movie/Date Renaming code part 2 - rename and move files to parent folder if all_ok and file_sorter.sort_file: if newfiles: file_sorter.rename(newfiles, workdir_complete) workdir_complete, ok = file_sorter.move(workdir_complete) else: workdir_complete, ok = file_sorter.rename_with_ext(workdir_complete) if not ok: nzo.set_unpack_info('Unpack', T('Failed to move files')) all_ok = False ## Run the user script script_path = make_script_path(script) if (all_ok or not cfg.safe_postproc()) and (not nzb_list) and script_path: #set the current nzo status to "Ext Script...". Used in History nzo.status = Status.RUNNING nzo.set_action_line(T('Running script'), unicoder(script)) nzo.set_unpack_info('Script', T('Running user script %s') % unicoder(script), unique=True) script_log, script_ret = external_processing(script_path, workdir_complete, nzo.filename, msgid, dirname, cat, nzo.group, job_result) script_line = get_last_line(script_log) if script_log: script_output = nzo.nzo_id if script_line: nzo.set_unpack_info('Script', unicoder(script_line), unique=True) else: nzo.set_unpack_info('Script', T('Ran %s') % unicoder(script), unique=True) else: script = "" script_line = "" script_ret = 0 ## Email the results if (not nzb_list) and cfg.email_endjob(): if (cfg.email_endjob() == 1) or (cfg.email_endjob() == 2 and (unpack_error or par_error)): emailer.endjob(dirname, msgid, cat, all_ok, workdir_complete, nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, script, TRANS(script_log), script_ret) if script_output: # Can do this only now, otherwise it would show up in the email if script_ret: script_ret = 'Exit(%s) ' % script_ret else: script_ret = '' if script_line: nzo.set_unpack_info('Script', u'%s%s <a href="./scriptlog?name=%s">(%s)</a>' % (script_ret, unicoder(script_line), urllib.quote(script_output), T('More')), unique=True) else: nzo.set_unpack_info('Script', u'%s<a href="./scriptlog?name=%s">%s</a>' % (script_ret, urllib.quote(script_output), T('View script output')), unique=True) ## Cleanup again, including NZB files if all_ok: cleanup_list(workdir_complete, False) ## Remove newzbin bookmark, if any if msgid and all_ok: Bookmarks.do.del_bookmark(msgid) elif all_ok and isinstance(nzo.url, str): sabnzbd.proxy_rm_bookmark(nzo.url) ## Force error for empty result all_ok = all_ok and not empty ## Show final status in history if all_ok: growler.send_notification(T('Download Completed'), filename, 'complete') nzo.status = Status.COMPLETED else: growler.send_notification(T('Download Failed'), filename, 'complete') nzo.status = Status.FAILED except: logging.error(Ta('Post Processing Failed for %s (%s)'), filename, crash_msg) if not crash_msg: logging.info("Traceback: ", exc_info = True) crash_msg = T('see logfile') nzo.fail_msg = T('PostProcessing was aborted (%s)') % unicoder(crash_msg) growler.send_notification(T('Download Failed'), filename, 'complete') nzo.status = Status.FAILED par_error = True all_ok = False if cfg.email_endjob(): emailer.endjob(dirname, msgid, cat, all_ok, workdir_complete, nzo.bytes_downloaded, nzo.fail_msg, nzo.unpack_info, '', '', 0) if all_ok: # If the folder only contains one file OR folder, have that as the path # Be aware that series/generic/date sorting may move a single file into a folder containing other files workdir_complete = one_file_or_folder(workdir_complete) workdir_complete = os.path.normpath(workdir_complete) # Log the overall time taken for postprocessing postproc_time = int(time.time() - start) # Create the history DB instance history_db = database.get_history_handle() # Add the nzo to the database. Only the path, script and time taken is passed # Other information is obtained from the nzo history_db.add_history_db(nzo, workdir_complete, nzo.downpath, postproc_time, script_log, script_line) # The connection is only used once, so close it here history_db.close() ## Clean up the NZO try: logging.info('Cleaning up %s (keep_basic=%s)', filename, str(not all_ok)) sabnzbd.nzbqueue.NzbQueue.do.cleanup_nzo(nzo, keep_basic=not all_ok) except: logging.error(Ta('Cleanup of %s failed.'), nzo.final_name) logging.info("Traceback: ", exc_info = True) ## Remove download folder if all_ok: try: if os.path.exists(workdir): logging.debug('Removing workdir %s', workdir) remove_all(workdir, recursive=True) except: logging.error(Ta('Error removing workdir (%s)'), workdir) logging.info("Traceback: ", exc_info = True) return True
def stop(self): self.shutdown = True growler.send_notification("SABnzbd", T("Shutting down"), "startup")