class InputDisplay(OSDWindow): IMAGE = "inputdisplay.svg" HILIGHT_COLOR = "#FF00FF00" # ARGB OBSERVE_COLOR = "#00007FFF" # ARGB def __init__(self, imagepath="/usr/share/scc/images"): OSDWindow.__init__(self, "osd-menu") self.daemon = None self.config = None self.hilights = { self.HILIGHT_COLOR : set(), self.OBSERVE_COLOR : set() } self.imagepath = imagepath self._eh_ids = [] def show(self): self.main_area = Gtk.Fixed() self.background = SVGWidget(os.path.join(self.imagepath, self.IMAGE)) self.lpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.rpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.stickTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.main_area.set_property("margin-left", 10) self.main_area.set_property("margin-right", 10) self.main_area.set_property("margin-top", 10) self.main_area.set_property("margin-bottom", 10) self.main_area.put(self.background, 0, 0) self.main_area.put(self.lpadTest, 40, 40) self.main_area.put(self.rpadTest, 290, 90) self.main_area.put(self.stickTest, 150, 40) self.add(self.main_area) OSDWindow.show(self) self.lpadTest.hide() self.rpadTest.hide() self.stickTest.hide() def run(self): self.daemon = DaemonManager() self._connect_handlers() OSDWindow.run(self) def use_daemon(self, d): """ Allows (re)using already existing DaemonManager instance in same process. use_config() should be be called before parse_argumets() if this is used. """ self.daemon = d self._connect_handlers() self.on_daemon_connected(self.daemon) def _connect_handlers(self): self._eh_ids += [ (self.daemon, self.daemon.connect('dead', self.on_daemon_died)), (self.daemon, self.daemon.connect('error', self.on_daemon_died)), (self.daemon, self.daemon.connect('alive', self.on_daemon_connected)), ] def on_daemon_connected(self, *a): c = self.daemon.get_controllers()[0] c.unlock_all() c.observe(DaemonManager.nocallback, self.on_observe_failed, 'A', 'B', 'C', 'X', 'Y', 'START', 'BACK', 'LB', 'RB', 'LPAD', 'RPAD', 'LGRIP', 'RGRIP', 'LT', 'RT', 'LEFT', 'RIGHT', 'STICK', 'STICKPRESS') c.connect('event', self.on_daemon_event_observer) c.connect('lost', self.on_controller_lost) def on_observe_failed(self, error): log.error("Failed to enable test mode: %s", error) if "Sniffing" in error: log.error("") log.error("=================================================================================") log.error("[!!] Please, enable 'Input Test Mode' on 'Advanced' tab in SC-Controller settings") log.error("=================================================================================") self.quit(3) def on_daemon_event_observer(self, daemon, what, data): if what in (LEFT, RIGHT, STICK): widget, area = { LEFT : (self.lpadTest, "LPADTEST"), RIGHT : (self.rpadTest, "RPADTEST"), STICK : (self.stickTest, "STICKTEST"), }[what] # Check if stick or pad is released if data[0] == data[1] == 0: widget.hide() return if not widget.is_visible(): widget.show() # Grab values ax, ay, aw, trash = self.background.get_area_position(area) cw = widget.get_allocation().width # Compute center x, y = ax + aw * 0.5 - cw * 0.5, ay + 1.0 - cw * 0.5 # Add pad position x += data[0] * aw / STICK_PAD_MAX * 0.5 y -= data[1] * aw / STICK_PAD_MAX * 0.5 # Move circle self.main_area.move(widget, x, y) elif what in ("LT", "RT", "STICKPRESS"): what = { "LT" : "LEFT", "RT" : "RIGHT", "STICKPRESS" : "STICK" }[what] if data[0]: self.hilights[self.OBSERVE_COLOR].add(what) else: self.hilights[self.OBSERVE_COLOR].remove(what) self._update_background() elif hasattr(SCButtons, what): try: if data[0]: self.hilights[self.OBSERVE_COLOR].add(what) else: self.hilights[self.OBSERVE_COLOR].remove(what) self._update_background() except KeyError, e: # Non fatal pass else:
class App(Gtk.Application, UserDataManager, BindingEditor): """ Main application / window. """ IMAGE = "background.svg" HILIGHT_COLOR = "#FF00FF00" # ARGB OBSERVE_COLOR = "#00007FFF" # ARGB CONFIG = "scc.config.json" RELEASE_URL = "https://github.com/kozec/sc-controller/releases/tag/v%s" OSD_MODE_PROF_NAME = ".scc-osd.profile_editor" def __init__(self, gladepath="/usr/share/scc", imagepath="/usr/share/scc/images"): Gtk.Application.__init__(self, application_id="me.kozec.scc", flags=Gio.ApplicationFlags.HANDLES_COMMAND_LINE | Gio.ApplicationFlags.NON_UNIQUE ) UserDataManager.__init__(self) BindingEditor.__init__(self, self) # Setup Gtk.Application self.setup_commandline() # Setup DaemonManager self.dm = DaemonManager() self.dm.connect("alive", self.on_daemon_alive) self.dm.connect("controller-count-changed", self.on_daemon_ccunt_changed) self.dm.connect("dead", self.on_daemon_dead) self.dm.connect("error", self.on_daemon_error) self.dm.connect('reconfigured', self.on_daemon_reconfigured), self.dm.connect("version", self.on_daemon_version) # Set variables self.config = Config() self.gladepath = gladepath self.imagepath = imagepath self.builder = None self.recursing = False self.statusicon = None self.status = "unknown" self.context_menu_for = None self.daemon_changed_profile = False self.osd_mode = False # In OSD mode, only active profile can be editted self.osd_mode_mapper = None self.background = None self.outdated_version = None self.profile_switchers = [] self.current_file = None # Currently edited file self.controller_count = 0 self.current = Profile(GuiActionParser()) self.just_started = True self.button_widgets = {} self.hilights = { App.HILIGHT_COLOR : set(), App.OBSERVE_COLOR : set() } self.undo = [] self.redo = [] def setup_widgets(self): # Important stuff self.builder = Gtk.Builder() self.builder.add_from_file(os.path.join(self.gladepath, "app.glade")) self.builder.connect_signals(self) self.window = self.builder.get_object("window") self.add_window(self.window) self.window.set_title(_("SC Controller")) self.window.set_wmclass("SC Controller", "SC Controller") self.ribar = None self.create_binding_buttons() ps = self.add_switcher(10, 10) ps.set_allow_new(True) ps.set_profile(self.load_profile_selection()) ps.connect('new-clicked', self.on_new_clicked) ps.connect('save-clicked', self.on_save_clicked) # Drag&drop target self.builder.get_object("content").drag_dest_set(Gtk.DestDefaults.ALL, [ Gtk.TargetEntry.new("text/uri-list", Gtk.TargetFlags.OTHER_APP, 0), Gtk.TargetEntry.new("text/plain", Gtk.TargetFlags.OTHER_APP, 0) ], Gdk.DragAction.COPY ) # 'C' button vbc = self.builder.get_object("vbC") self.main_area = self.builder.get_object("mainArea") vbc.get_parent().remove(vbc) vbc.connect('size-allocate', self.on_vbc_allocated) # Background self.background = SVGWidget(self, os.path.join(self.imagepath, self.IMAGE)) self.background.connect('hover', self.on_background_area_hover) self.background.connect('leave', self.on_background_area_hover, None) self.background.connect('click', self.on_background_area_click) self.main_area.put(self.background, 0, 0) self.main_area.put(vbc, 0, 0) # (self.IMAGE_SIZE[0] / 2) - 90, self.IMAGE_SIZE[1] - 100) # Test markers (those blue circles over PADs and sticks) self.lpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.rpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.stickTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.main_area.put(self.lpadTest, 40, 40) self.main_area.put(self.rpadTest, 290, 90) self.main_area.put(self.stickTest, 150, 40) # OSD mode (if used) if self.osd_mode: self.builder.get_object("btDaemon").set_sensitive(False) self.window.set_title(_("Edit Profile")) # Headerbar headerbar(self.builder.get_object("hbWindow")) def setup_statusicon(self): menu = self.builder.get_object("mnuTray") self.statusicon = get_status_icon(self.imagepath, menu) self.statusicon.connect('clicked', self.on_statusicon_clicked) if not self.statusicon.is_clickable(): self.builder.get_object("mnuShowWindowTray").set_visible(True) GLib.idle_add(self.statusicon.set, "scc-%s" % (self.status,), _("SC Controller")) def destroy_statusicon(self): self.statusicon.destroy() self.statusicon = None def check(self): """ Performs various (three) checks and reports possible problems """ # TODO: Maybe not best place to do this try: # Dynamic modules rawlist = file("/proc/modules", "r").read().split("\n") kernel_mods = [ line.split(" ")[0] for line in rawlist ] # Built-in modules release = platform.uname()[2] rawlist = file("/lib/modules/%s/modules.builtin" % release, "r").read().split("\n") kernel_mods += [ os.path.split(x)[-1].split(".")[0] for x in rawlist ] except Exception: # Maybe running on BSD or Windows... kernel_mods = [ ] if len(kernel_mods) > 0 and "uinput" not in kernel_mods: # There is no uinput msg = _('uinput kernel module not loaded') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') msg += "\n" + _('or click on "Fix Temporary" button to attempt fix that should work until next restart.') ribar = self.show_error(msg) gksudo = find_gksudo() modprobe = find_binary("modprobe") if gksudo and not hasattr(ribar, "_fix_tmp"): button = Gtk.Button.new_with_label(_("Fix Temporary")) ribar._fix_tmp = button button.connect('clicked', self.apply_temporary_fix, gksudo + [modprobe, "uinput"], _("This will load missing uinput module.") ) ribar.add_button(button, -1) return True elif not os.path.exists("/dev/uinput"): # /dev/uinput missing msg = _('/dev/uinput doesn\'t exists') msg += "\n" + _('uinput kernel module is loaded, but /dev/uinput is missing.') #msg += "\n\n" + _('Please, consult your distribution manual on what in the world could cause this.') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') self.show_error(msg) return True elif not check_access("/dev/uinput"): # Cannot acces uinput msg = _('You don\'t have required access to /dev/uinput.') msg += "\n" + _('This will most likely prevent emulation from working.') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') msg += "\n" + _('or click on "Fix Temporary" button to attempt fix that should work until next restart.') ribar = self.show_error(msg) gksudo = find_gksudo() if gksudo and not hasattr(ribar, "_fix_tmp"): button = Gtk.Button.new_with_label(_("Fix Temporary")) ribar._fix_tmp = button button.connect('clicked', self.apply_temporary_fix, gksudo + ["chmod", "666", "/dev/uinput"], _("This will enable input emulation for <i>every application</i> and <i>all users</i> on this machine.") ) ribar.add_button(button, -1) return True return False def apply_temporary_fix(self, trash, shell_command, message): """ Displays MessageBox with confirmation, tries to run passed shell command and restarts daemon. Doing this allows user to teporary fix some uinput-related problems by his vaim belief I'll not format his harddrive. """ d = Gtk.MessageDialog(parent=self.window, flags = Gtk.DialogFlags.MODAL, type = Gtk.MessageType.WARNING, buttons = Gtk.ButtonsType.OK_CANCEL, message_format = _("sudo fix-my-pc") ) def on_response(dialog, response_id): if response_id == -5: # OK button, not defined anywhere sudo = Gio.Subprocess.new(shell_command, 0) sudo.communicate(None, None) if sudo.get_exit_status() == 0: self.dm.restart() else: d2 = Gtk.MessageDialog(parent=d, flags = Gtk.DialogFlags.MODAL, type = Gtk.MessageType.ERROR, buttons = Gtk.ButtonsType.OK, message_format = _("Command Failed") ) d2.run() d2.destroy() d.destroy() d.connect("response", on_response) d.format_secondary_markup( _("""Following command is going to be executed: <b>%s</b> %s""") % (" ".join(shell_command), message), ) d.show() def hilight(self, button): """ Hilights specified button on background image """ if button: self.hilights[App.HILIGHT_COLOR] = set([button]) else: self.hilights[App.HILIGHT_COLOR] = set() self._update_background() def _update_background(self): h = {} for color in self.hilights: for i in self.hilights[color]: h[i] = color self.background.hilight(h) def hint(self, button): """ As hilight, but marks GTK Button as well """ active = None for b in self.button_widgets.values(): b.widget.set_state(Gtk.StateType.NORMAL) if b.name == button: active = b.widget if active is not None: active.set_state(Gtk.StateType.ACTIVE) self.hilight(button) def show_editor(self, id): action = self.get_action(self.current, id) ae = self.choose_editor(action, "", id) ae.allow_first_page() ae.set_input(id, action) ae.show(self.window) def show_context_menu(self, for_id): """ Sets sensitivity of popup menu items and displays it on screen """ mnuPopup = self.builder.get_object("mnuPopup") mnuCopy = self.builder.get_object("mnuCopy") mnuClear = self.builder.get_object("mnuClear") mnuPaste = self.builder.get_object("mnuPaste") mnuEPress = self.builder.get_object("mnuEditPress") mnuEPressS = self.builder.get_object("mnuEditPressSeparator") self.context_menu_for = for_id clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) mnuCopy.set_sensitive(bool(self.get_action(self.current, for_id))) mnuClear.set_sensitive(bool(self.get_action(self.current, for_id))) mnuPaste.set_sensitive(clp.wait_is_text_available()) mnuEPress.set_visible(for_id in STICKS + PADS) mnuEPressS.set_visible(mnuEPress.get_visible()) mnuPopup.popup(None, None, None, None, 3, Gtk.get_current_event_time()) def save_config(self): self.config.save() self.dm.reconfigure() self.enable_test_mode() def on_statusicon_clicked(self, *a): """ Handler for user clicking on tray icon button """ self.window.set_visible(not self.window.get_visible()) def on_window_delete_event(self, *a): """ Called when user tries to close window """ if not IS_UNITY and self.config['gui']['enable_status_icon'] and self.config['gui']['minimize_to_status_icon']: # Override closing and hide instead self.window.set_visible(False) else: self.on_mnuExit_activate() return True def on_mnuClear_activate(self, *a): """ Handler for 'Clear' context menu item. Simply sets NoAction to input. """ self.on_action_chosen(self.context_menu_for, NoAction()) def on_mnuCopy_activate(self, *a): """ Handler for 'Copy' context menu item. Converts action to string and sends that string to clipboard. """ a = self.get_action(self.current, self.context_menu_for) if a: if a.name: a = NameModifier(a.name, a) clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) clp.set_text(a.to_string().encode('utf-8'), -1) clp.store() def on_mnuPaste_activate(self, *a): """ Handler for 'Paste' context menu item. Reads string from clipboard, parses it as action and sets that action on selected input. """ clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) text = clp.wait_for_text() if text: a = GuiActionParser().restart(text.decode('utf-8')).parse() if not isinstance(a, InvalidAction): self.on_action_chosen(self.context_menu_for, a) def on_mnuEditPress_activate(self, *a): """ Handler for 'Edit Pressed Action' context menu item. """ self.show_editor(getattr(SCButtons, self.context_menu_for)) def on_mnuGlobalSettings_activate(self, *a): from scc.gui.global_settings import GlobalSettings gs = GlobalSettings(self) gs.show(self.window) def on_mnuImport_activate(self, *a): """ Handler for 'Import Steam Profile' context menu item. Displays apropriate dialog. """ from scc.gui.importexport.dialog import Dialog ied = Dialog(self) ied.show(self.window) def on_btUndo_clicked(self, *a): if len(self.undo) < 1: return undo, self.undo = self.undo[-1], self.undo[0:-1] self.set_action(self.current, undo.id, undo.before) self.redo.append(undo) self.builder.get_object("btRedo").set_sensitive(True) if len(self.undo) < 1: self.builder.get_object("btUndo").set_sensitive(False) self.on_profile_modified() def on_btRedo_clicked(self, *a): if len(self.redo) < 1: return redo, self.redo = self.redo[-1], self.redo[0:-1] self.set_action(self.current, redo.id, redo.after) self.undo.append(redo) self.builder.get_object("btUndo").set_sensitive(True) if len(self.redo) < 1: self.builder.get_object("btRedo").set_sensitive(False) self.on_profile_modified() def on_profiles_loaded(self, profiles): for ps in self.profile_switchers: ps.set_profile_list(profiles) def undeletable_dialog(self, dlg, *a): dlg.hide() return True def on_btNewProfile_clicked(self, *a): """ Called when new profile name is set and OK is clicked """ txNewProfile = self.builder.get_object("txNewProfile") rbNewProfile = self.builder.get_object("rbNewProfile") dlg = self.builder.get_object("dlgNewProfile") if rbNewProfile.get_active(): # Creating blank profile is requested self.current.clear() else: self.current.is_template = False self.new_profile(self.current, txNewProfile.get_text()) dlg.hide() def on_rbNewProfile_group_changed(self, *a): """ Called when user clicks 'Copy current profile' button. If profile name was not changed by user before clicking it, it's automatically changed. """ txNewProfile = self.builder.get_object("txNewProfile") rbNewProfile = self.builder.get_object("rbNewProfile") if not txNewProfile._changed: self.recursing = True if rbNewProfile.get_active(): # Create empty profile txNewProfile.set_text(self.generate_new_name()) else: # Copy current profile txNewProfile.set_text(self.generate_copy_name(txNewProfile._name)) self.recursing = False def on_profile_modified(self, update_ui=True): """ Called when selected profile is modified in memory. """ if update_ui: self.profile_switchers[0].set_profile_modified(True, self.current.is_template) if not self.current_file.get_path().endswith(".mod"): mod = self.current_file.get_path() + ".mod" self.current_file = Gio.File.new_for_path(mod) self.save_profile(self.current_file, self.current) def on_profile_loaded(self, profile, giofile): self.current = profile self.current_file = giofile self.recursing = True self.profile_switchers[0].set_profile_modified(False, self.current.is_template) self.builder.get_object("txProfileFilename").set_text(giofile.get_path()) self.builder.get_object("txProfileDescription").get_buffer().set_text(self.current.description) self.builder.get_object("cbProfileIsTemplate").set_active(self.current.is_template) for b in self.button_widgets.values(): b.update() self.recursing = False def on_profile_selected(self, ps, name, giofile): if ps == self.profile_switchers[0]: self.load_profile(giofile) if ps.get_controller(): ps.get_controller().set_profile(giofile.get_path()) def on_unknown_profile(self, ps, name): log.warn("Daemon reported unknown profile: '%s'; Overriding.", name) if self.current_file is not None: ps.get_controller().set_profile(self.current_file.get_path()) def on_save_clicked(self, *a): if self.current_file.get_path().endswith(".mod"): orig = self.current_file.get_path()[0:-4] self.current_file = Gio.File.new_for_path(orig) if self.current.is_template: # Ask user if he is OK with overwriting template d = Gtk.MessageDialog(parent=self.window, flags = Gtk.DialogFlags.MODAL, type = Gtk.MessageType.QUESTION, buttons = Gtk.ButtonsType.YES_NO, message_format = _("You are about to save changes over template.\nAre you sure?") ) NEW_PROFILE_BUTTON = 7 d.add_button(_("Create New Profile"), NEW_PROFILE_BUTTON) r = d.run() d.destroy() if r == NEW_PROFILE_BUTTON: # New profile button clicked ps = self.profile_switchers[0] rbCopyProfile = self.builder.get_object("rbCopyProfile") self.on_new_clicked(ps, ps.get_profile_name()) rbCopyProfile.set_active(True) return if r != -8: # Bail out if user answers anything but yes return self.save_profile(self.current_file, self.current) def on_profile_saved(self, giofile, send=True): """ Called when selected profile is saved to disk """ if self.osd_mode: # Special case, profile shouldn't be changed while in osd_mode return if giofile.get_path().endswith(".mod"): # Special case, this one is saved only to be sent to daemon # and user doesn't need to know about it if self.dm.is_alive(): self.dm.set_profile(giofile.get_path()) return self.profile_switchers[0].set_profile_modified(False, self.current.is_template) if send and self.dm.is_alive() and not self.daemon_changed_profile: self.dm.set_profile(giofile.get_path()) self.current_file = giofile def generate_new_name(self): """ Generates name for new profile. That is 'New Profile X', where X is number that makes name unique. """ i = 1 new_name = _("New Profile %s") % (i,) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") while os.path.exists(filename): i += 1 new_name = _("New Profile %s") % (i,) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") return new_name def generate_copy_name(self, name): """ Generates name for profile copy. That is 'New Profile X', where X is number that makes name unique. """ new_name = _("%s (copy)") % (name,) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") i = 2 while os.path.exists(filename): new_name = _("%s (copy %s)") % (name,) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") i += 1 return new_name def on_txNewProfile_changed(self, tx): if self.recursing: return tx._changed = True def on_new_clicked(self, ps, name): dlg = self.builder.get_object("dlgNewProfile") txNewProfile = self.builder.get_object("txNewProfile") rbNewProfile = self.builder.get_object("rbNewProfile") self.recursing = True rbNewProfile.set_active(True) txNewProfile.set_text(self.generate_new_name()) txNewProfile._name = name txNewProfile._changed = False self.recursing = False dlg.set_transient_for(self.window) dlg.show() def on_action_chosen(self, id, action, mark_changed=True): before = self.set_action(self.current, id, action) if mark_changed: if before.to_string() != action.to_string(): # TODO: Maybe better comparison self.undo.append(UndoRedo(id, before, action)) self.builder.get_object("btUndo").set_sensitive(True) self.on_profile_modified() else: self.on_profile_modified(update_ui=False) return before def on_background_area_hover(self, trash, area): self.hint(area) def on_background_area_click(self, trash, area): if area in [ x.name for x in BUTTONS ]: self.hint(None) self.show_editor(getattr(SCButtons, area)) elif area in TRIGGERS + STICKS + PADS: self.hint(None) self.show_editor(area) def on_vbc_allocated(self, vbc, allocation): """ Called when size of 'Button C' is changed. Centers button on background image """ main_area = self.builder.get_object("mainArea") x = (main_area.get_allocation().width - allocation.width) / 2 y = main_area.get_allocation().height - allocation.height main_area.move(vbc, x, y) def on_ebImage_motion_notify_event(self, box, event): self.background.on_mouse_moved(event.x, event.y) def on_exiting_n_daemon_killed(self, *a): self.quit() def on_mnuExit_activate(self, *a): if self.app.config['gui']['autokill_daemon']: log.debug("Terminating scc-daemon") for x in ("content", "mnuEmulationEnabled", "mnuEmulationEnabledTray"): w = self.builder.get_object(x) w.set_sensitive(False) self.set_daemon_status("unknown", False) self.hide_error() if self.dm.is_alive(): self.dm.connect("dead", self.on_exiting_n_daemon_killed) self.dm.connect("error", self.on_exiting_n_daemon_killed) self.dm.stop() else: # Daemon appears to be dead, kill it just in case self.dm.stop() self.quit() else: self.quit() def on_mnuAbout_activate(self, *a): from scc.gui.aboutdialog import AboutDialog AboutDialog(self).show(self.window) def on_daemon_alive(self, *a): self.set_daemon_status("alive", True) if not self.release_notes_visible(): self.hide_error() self.just_started = False if self.osd_mode: self.enable_osd_mode() elif self.profile_switchers[0].get_file() is not None and not self.just_started: self.dm.set_profile(self.current_file.get_path()) GLib.timeout_add_seconds(1, self.check) self.enable_test_mode() def on_daemon_ccunt_changed(self, daemon, count): if (self.controller_count, count) == (0, 1): # First controller connected # # 'event' signal should be connected only on first controller, # so this block is executed only when number of connected # controllers changes from 0 to 1 c = self.dm.get_controllers()[0] c.connect('event', self.on_daemon_event_observer) elif count > self.controller_count: # Controller added while len(self.profile_switchers) < count: s = self.add_switcher() elif count < self.controller_count: # Controller removed while len(self.profile_switchers) > max(1, count): s = self.profile_switchers.pop() s.set_controller(None) self.remove_switcher(s) # Assign controllers to widgets for i in xrange(0, count): c = self.dm.get_controllers()[i] self.profile_switchers[i].set_controller(c) if count < 1: # Special case, no controllers are connected, but one widget # has to stay on screen self.profile_switchers[0].set_controller(None) self.controller_count = count def new_profile(self, profile, name): filename = os.path.join(get_profiles_path(), name + ".sccprofile") self.current_file = Gio.File.new_for_path(filename) self.save_profile(self.current_file, profile) def add_switcher(self, margin_left=30, margin_right=40, margin_bottom=2): """ Adds new profile switcher widgets on top of window. Called when new controller is connected to daemon. Returns generated ProfileSwitcher instance. """ vbAllProfiles = self.builder.get_object("vbAllProfiles") ps = ProfileSwitcher(self.imagepath, self.config) ps.set_margin_left(margin_left) ps.set_margin_right(margin_right) ps.set_margin_bottom(margin_bottom) ps.connect('right-clicked', self.on_profile_right_clicked) vbAllProfiles.pack_start(ps, False, False, 0) vbAllProfiles.reorder_child(ps, 0) vbAllProfiles.show_all() if self.osd_mode: ps.set_allow_switch(False) if len(self.profile_switchers) > 0: ps.set_profile_list(self.profile_switchers[0].get_profile_list()) self.profile_switchers.append(ps) ps.connect('changed', self.on_profile_selected) ps.connect('unknown-profile', self.on_unknown_profile) return ps def remove_switcher(self, s): """ Removes given profile switcher from UI. """ vbAllProfiles = self.builder.get_object("vbAllProfiles") vbAllProfiles.remove(s) s.destroy() def enable_test_mode(self): """ Disables and re-enables Input Test mode. If sniffing is disabled in daemon configuration, 2nd call fails and logs error. """ if self.dm.is_alive() and not self.osd_mode: try: c = self.dm.get_controllers()[0] except IndexError: # Zero controllers return c.unlock_all() c.observe(DaemonManager.nocallback, self.on_observe_failed, 'A', 'B', 'C', 'X', 'Y', 'START', 'BACK', 'LB', 'RB', 'LPAD', 'RPAD', 'LGRIP', 'RGRIP', 'LT', 'RT', 'LEFT', 'RIGHT', 'STICK', 'STICKPRESS') def enable_osd_mode(self): # TODO: Support for multiple controllers here self.osd_mode_controller = 0 osd_mode_profile = Profile(GuiActionParser()) osd_mode_profile.load(find_profile(App.OSD_MODE_PROF_NAME)) try: c = self.dm.get_controllers()[self.osd_mode_controller] except IndexError: log.error("osd_mode: Controller not connected") self.quit() return def on_lock_failed(*a): log.error("osd_mode: Locking failed") self.quit() def on_lock_success(*a): log.debug("osd_mode: Locked everything") from scc.gui.osd_mode_mapper import OSDModeMapper self.osd_mode_mapper = OSDModeMapper(osd_mode_profile) self.osd_mode_mapper.set_target_window(self.window.get_window()) GLib.timeout_add(10, self.osd_mode_mapper.run_scheduled) # Locks everything but pads. Pads are emulating mouse and this is # better left in daemon - involving socket in mouse controls # adds too much lags. c.lock(on_lock_success, on_lock_failed, 'A', 'B', 'X', 'Y', 'START', 'BACK', 'LB', 'RB', 'C', 'LPAD', 'RPAD', 'STICK', 'LGRIP', 'RGRIP', 'LT', 'RT', 'STICKPRESS') # Ask daemon to temporaly reconfigure pads for mouse emulation c.replace(DaemonManager.nocallback, on_lock_failed, LEFT, osd_mode_profile.pads[LEFT]) c.replace(DaemonManager.nocallback, on_lock_failed, RIGHT, osd_mode_profile.pads[RIGHT]) def on_observe_failed(self, error): log.debug("Failed to enable test mode: %s", error) def on_daemon_version(self, daemon, version): """ Checks if reported version matches expected one. If not, daemon is restarted. """ if version != DAEMON_VERSION and self.outdated_version != version: log.warning( "Running daemon instance is too old (version %s, expected %s). Restarting...", version, DAEMON_VERSION) self.outdated_version = version self.set_daemon_status("unknown", False) self.dm.restart() else: # At this point, correct daemon version of daemon is running # and we can check if there is anything new to inform user about if self.app.config['gui']['news']['last_version'] != App.get_release(): if self.app.config['gui']['news']['enabled']: if not self.osd_mode: self.check_release_notes() def on_daemon_error(self, daemon, error): log.debug("Daemon reported error '%s'", error) msg = _('There was an error with enabling emulation: <b>%s</b>') % (error,) # Known errors are handled with aditional message if "Device not found" in error: msg += "\n" + _("Please, check if you have reciever dongle connected to USB port.") elif "LIBUSB_ERROR_ACCESS" in error: msg += "\n" + _("You don't have access to controller device.") msg += "\n\n" + ( _("Consult your distribution manual, try installing Steam package or <a href='%s'>install required udev rules manually</a>.") % 'https://wiki.archlinux.org/index.php/Gamepad#Steam_Controller_Not_Pairing' ) # TODO: Write howto somewhere instead of linking to ArchWiki elif "LIBUSB_ERROR_BUSY" in error: msg += "\n" + _("Another application (most likely Steam) is using the controller.") elif "LIBUSB_ERROR_PIPE" in error: msg += "\n" + _("USB dongle was removed.") elif "Failed to create uinput device." in error: # Call check() method and try to determine what went wrong. if self.check(): # Check() returns True if error was "handled". return # If check() fails to find error reason, error message is displayed as it is if self.osd_mode: self.quit() self.show_error(msg) self.set_daemon_status("error", True) def on_daemon_event_observer(self, daemon, what, data): if self.osd_mode_mapper: self.osd_mode_mapper.handle_event(daemon, what, data) elif what in (LEFT, RIGHT, STICK): widget, area = { LEFT : (self.lpadTest, "LPADTEST"), RIGHT : (self.rpadTest, "RPADTEST"), STICK : (self.stickTest, "STICKTEST"), }[what] # Check if stick or pad is released if data[0] == data[1] == 0: widget.hide() return if not widget.is_visible(): widget.show() # Grab values ax, ay, aw, trash = self.background.get_area_position(area) cw = widget.get_allocation().width # Compute center x, y = ax + aw * 0.5 - cw * 0.5, ay + 1.0 - cw * 0.5 # Add pad position x += data[0] * aw / STICK_PAD_MAX * 0.5 y -= data[1] * aw / STICK_PAD_MAX * 0.5 # Move circle self.main_area.move(widget, x, y) elif what in ("LT", "RT", "STICKPRESS"): what = { "LT" : "LEFT", "RT" : "RIGHT", "STICKPRESS" : "STICK" }[what] if data[0]: self.hilights[App.OBSERVE_COLOR].add(what) else: self.hilights[App.OBSERVE_COLOR].remove(what) self._update_background() elif hasattr(SCButtons, what): try: if data[0]: self.hilights[App.OBSERVE_COLOR].add(what) else: self.hilights[App.OBSERVE_COLOR].remove(what) self._update_background() except KeyError, e: # Non fatal pass else:
class InputDisplay(OSDWindow): IMAGE = "inputdisplay.svg" HILIGHT_COLOR = "#FF00FF00" # ARGB OBSERVE_COLOR = "#00007FFF" # ARGB def __init__(self, imagepath="/usr/share/scc/images"): OSDWindow.__init__(self, "osd-menu") self.daemon = None self.config = None self.hilights = {self.HILIGHT_COLOR: set(), self.OBSERVE_COLOR: set()} self.imagepath = imagepath self._eh_ids = [] def show(self): self.main_area = Gtk.Fixed() self.background = SVGWidget(self, os.path.join(self.imagepath, self.IMAGE)) self.lpadTest = Gtk.Image.new_from_file( os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.rpadTest = Gtk.Image.new_from_file( os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.stickTest = Gtk.Image.new_from_file( os.path.join(self.imagepath, "inputdisplay-cursor.svg")) self.main_area.set_property("margin-left", 10) self.main_area.set_property("margin-right", 10) self.main_area.set_property("margin-top", 10) self.main_area.set_property("margin-bottom", 10) self.main_area.put(self.background, 0, 0) self.main_area.put(self.lpadTest, 40, 40) self.main_area.put(self.rpadTest, 290, 90) self.main_area.put(self.stickTest, 150, 40) self.add(self.main_area) OSDWindow.show(self) self.lpadTest.hide() self.rpadTest.hide() self.stickTest.hide() def run(self): self.daemon = DaemonManager() self._connect_handlers() OSDWindow.run(self) def use_daemon(self, d): """ Allows (re)using already existing DaemonManager instance in same process. use_config() should be be called before parse_argumets() if this is used. """ self.daemon = d self._connect_handlers() self.on_daemon_connected(self.daemon) def _connect_handlers(self): self._eh_ids += [ (self.daemon, self.daemon.connect('dead', self.on_daemon_died)), (self.daemon, self.daemon.connect('error', self.on_daemon_died)), (self.daemon, self.daemon.connect('alive', self.on_daemon_connected)), ] def on_daemon_connected(self, *a): c = self.daemon.get_controllers()[0] c.unlock_all() c.observe(DaemonManager.nocallback, self.on_observe_failed, 'A', 'B', 'C', 'X', 'Y', 'START', 'BACK', 'LB', 'RB', 'LPAD', 'RPAD', 'LGRIP', 'RGRIP', 'LT', 'RT', 'LEFT', 'RIGHT', 'STICK', 'STICKPRESS') c.connect('event', self.on_daemon_event_observer) def on_observe_failed(self, error): log.error("Failed to enable test mode: %s", error) self.quit(3) def on_daemon_died(self, *a): log.error("Daemon died") self.quit(2) def on_daemon_event_observer(self, daemon, what, data): if what in (LEFT, RIGHT, STICK): widget, area = { LEFT: (self.lpadTest, "LPADTEST"), RIGHT: (self.rpadTest, "RPADTEST"), STICK: (self.stickTest, "STICKTEST"), }[what] # Check if stick or pad is released if data[0] == data[1] == 0: widget.hide() return if not widget.is_visible(): widget.show() # Grab values ax, ay, aw, trash = self.background.get_area_position(area) cw = widget.get_allocation().width # Compute center x, y = ax + aw * 0.5 - cw * 0.5, ay + 1.0 - cw * 0.5 # Add pad position x += data[0] * aw / STICK_PAD_MAX * 0.5 y -= data[1] * aw / STICK_PAD_MAX * 0.5 # Move circle self.main_area.move(widget, x, y) elif what in ("LT", "RT", "STICKPRESS"): what = {"LT": "LEFT", "RT": "RIGHT", "STICKPRESS": "STICK"}[what] if data[0]: self.hilights[self.OBSERVE_COLOR].add(what) else: self.hilights[self.OBSERVE_COLOR].remove(what) self._update_background() elif hasattr(SCButtons, what): try: if data[0]: self.hilights[self.OBSERVE_COLOR].add(what) else: self.hilights[self.OBSERVE_COLOR].remove(what) self._update_background() except KeyError, e: # Non fatal pass else:
class App(Gtk.Application, UserDataManager, BindingEditor): """ Main application / window. """ IMAGE = "background.svg" HILIGHT_COLOR = "#FF00FF00" # ARGB OBSERVE_COLOR = "#00007FFF" # ARGB CONFIG = "scc.config.json" def __init__(self, gladepath="/usr/share/scc", imagepath="/usr/share/scc/images"): Gtk.Application.__init__(self, application_id="me.kozec.scc", flags=Gio.ApplicationFlags.HANDLES_COMMAND_LINE | Gio.ApplicationFlags.NON_UNIQUE ) UserDataManager.__init__(self) BindingEditor.__init__(self, self) # Setup Gtk.Application self.setup_commandline() # Setup DaemonManager self.dm = DaemonManager() self.dm.connect("alive", self.on_daemon_alive) self.dm.connect("controller-count-changed", self.on_daemon_ccunt_changed) self.dm.connect("dead", self.on_daemon_dead) self.dm.connect("error", self.on_daemon_error) self.dm.connect('reconfigured', self.on_daemon_reconfigured), self.dm.connect("version", self.on_daemon_version) # Set variables self.config = Config() self.gladepath = gladepath self.imagepath = imagepath self.builder = None self.recursing = False self.statusicon = None self.status = "unknown" self.context_menu_for = None self.daemon_changed_profile = False self.background = None self.outdated_version = None self.profile_switchers = [] self.current_file = None # Currently edited file self.controller_count = 0 self.current = Profile(GuiActionParser()) self.just_started = True self.button_widgets = {} self.hilights = { App.HILIGHT_COLOR : set(), App.OBSERVE_COLOR : set() } self.undo = [] self.redo = [] def setup_widgets(self): # Important stuff self.builder = Gtk.Builder() self.builder.add_from_file(os.path.join(self.gladepath, "app.glade")) self.builder.connect_signals(self) self.window = self.builder.get_object("window") self.add_window(self.window) self.window.set_title(_("SC Controller")) self.window.set_wmclass("SC Controller", "SC Controller") self.ribar = None self.create_binding_buttons() ps = self.add_switcher(10, 10) ps.set_allow_new(True) ps.set_profile(self.load_profile_selection()) ps.connect('new-clicked', self.on_new_clicked) ps.connect('save-clicked', self.on_save_clicked) # Drag&drop target self.builder.get_object("content").drag_dest_set(Gtk.DestDefaults.ALL, [ Gtk.TargetEntry.new("text/uri-list", Gtk.TargetFlags.OTHER_APP, 0) ], Gdk.DragAction.COPY ) # 'C' button vbc = self.builder.get_object("vbC") self.main_area = self.builder.get_object("mainArea") vbc.get_parent().remove(vbc) vbc.connect('size-allocate', self.on_vbc_allocated) # Background self.background = SVGWidget(self, os.path.join(self.imagepath, self.IMAGE)) self.background.connect('hover', self.on_background_area_hover) self.background.connect('leave', self.on_background_area_hover, None) self.background.connect('click', self.on_background_area_click) self.main_area.put(self.background, 0, 0) self.main_area.put(vbc, 0, 0) # (self.IMAGE_SIZE[0] / 2) - 90, self.IMAGE_SIZE[1] - 100) # Test markers (those blue circles over PADs and sticks) self.lpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.rpadTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.stickTest = Gtk.Image.new_from_file(os.path.join(self.imagepath, "test-cursor.svg")) self.main_area.put(self.lpadTest, 40, 40) self.main_area.put(self.rpadTest, 290, 90) self.main_area.put(self.stickTest, 150, 40) # Headerbar headerbar(self.builder.get_object("hbWindow")) def setup_statusicon(self): menu = self.builder.get_object("mnuDaemon") self.statusicon = get_status_icon(self.imagepath, menu) self.statusicon.connect('clicked', self.on_statusicon_clicked) GLib.idle_add(self.statusicon.set, "scc-%s" % (self.status,), _("SC-Controller")) def destroy_statusicon(self): self.statusicon.destroy() self.statusicon = None def check(self): """ Performs various (three) checks and reports possible problems """ # TODO: Maybe not best place to do this try: kernel_mods = [ line.split(" ")[0] for line in file("/proc/modules", "r").read().split("\n") ] except Exception: # Maybe running on BSD or Windows... kernel_mods = [ ] if len(kernel_mods) > 0 and "uinput" not in kernel_mods: # There is no uinput msg = _('uinput kernel module not loaded') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') self.show_error(msg) elif not os.path.exists("/dev/uinput"): # /dev/uinput missing msg = _('/dev/uinput doesn\'t exists') msg += "\n" + _('uinput kernel module is loaded, but /dev/uinput is missing.') #msg += "\n\n" + _('Please, consult your distribution manual on what in the world could cause this.') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') self.show_error(msg) elif not check_access("/dev/uinput"): # Cannot acces uinput msg = _('You don\'t have required access to /dev/uinput.') msg += "\n" + _('This will most likely prevent emulation from working.') msg += "\n\n" + _('Please, consult your distribution manual on how to enable uinput') self.show_error(msg) def hilight(self, button): """ Hilights specified button on background image """ if button: self.hilights[App.HILIGHT_COLOR] = set([button]) else: self.hilights[App.HILIGHT_COLOR] = set() self._update_background() def _update_background(self): h = {} for color in self.hilights: for i in self.hilights[color]: h[i] = color self.background.hilight(h) def hint(self, button): """ As hilight, but marks GTK Button as well """ active = None for b in self.button_widgets.values(): b.widget.set_state(Gtk.StateType.NORMAL) if b.name == button: active = b.widget if active is not None: active.set_state(Gtk.StateType.ACTIVE) self.hilight(button) def show_editor(self, id): action = self.get_action(self.current, id) ae = self.choose_editor(action, "") ae.set_input(id, action) ae.show(self.window) def show_context_menu(self, for_id): """ Sets sensitivity of popup menu items and displays it on screen """ mnuPopup = self.builder.get_object("mnuPopup") mnuCopy = self.builder.get_object("mnuCopy") mnuClear = self.builder.get_object("mnuClear") mnuPaste = self.builder.get_object("mnuPaste") self.context_menu_for = for_id clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) mnuCopy.set_sensitive(bool(self.get_action(self.current, for_id))) mnuClear.set_sensitive(bool(self.get_action(self.current, for_id))) mnuPaste.set_sensitive(clp.wait_is_text_available()) mnuPopup.popup(None, None, None, None, 3, Gtk.get_current_event_time()) def save_config(self): self.config.save() self.dm.reconfigure() self.enable_test_mode() def on_statusicon_clicked(self, *a): """ Handler for user clicking on tray icon button """ self.window.set_visible(not self.window.get_visible()) def on_window_delete_event(self, *a): """ Called when user tries to close window """ if not IS_UNITY and self.config['gui']['enable_status_icon'] and self.config['gui']['minimize_to_status_icon']: # Override closing and hide instead self.window.set_visible(False) return True return False # Allow def on_mnuClear_activate(self, *a): """ Handler for 'Clear' context menu item. Simply sets NoAction to input. """ self.on_action_chosen(self.context_menu_for, NoAction()) def on_mnuCopy_activate(self, *a): """ Handler for 'Copy' context menu item. Converts action to string and sends that string to clipboard. """ a = self.get_action(self.current, self.context_menu_for) if a: if a.name: a = NameModifier(a.name, a) clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) clp.set_text(a.to_string().encode('utf-8'), -1) clp.store() def on_mnuPaste_activate(self, *a): """ Handler for 'Paste' context menu item. Reads string from clipboard, parses it as action and sets that action on selected input. """ clp = Gtk.Clipboard.get_default(Gdk.Display.get_default()) text = clp.wait_for_text() if text: a = GuiActionParser().restart(text.decode('utf-8')).parse() if not isinstance(a, InvalidAction): self.on_action_chosen(self.context_menu_for, a) def on_mnuGlobalSettings_activate(self, *a): from scc.gui.global_settings import GlobalSettings gs = GlobalSettings(self) gs.show(self.window) def on_mnuImport_activate(self, *a): """ Handler for 'Import Steam Profile' context menu item. Displays apropriate dialog. """ from scc.gui.import_dialog import ImportDialog gs = ImportDialog(self) gs.show(self.window) def on_btUndo_clicked(self, *a): if len(self.undo) < 1: return undo, self.undo = self.undo[-1], self.undo[0:-1] self.set_action(self.current, undo.id, undo.before) self.redo.append(undo) self.builder.get_object("btRedo").set_sensitive(True) if len(self.undo) < 1: self.builder.get_object("btUndo").set_sensitive(False) self.on_profile_modified() def on_btRedo_clicked(self, *a): if len(self.redo) < 1: return redo, self.redo = self.redo[-1], self.redo[0:-1] self.set_action(self.current, redo.id, redo.after) self.undo.append(redo) self.builder.get_object("btUndo").set_sensitive(True) if len(self.redo) < 1: self.builder.get_object("btRedo").set_sensitive(False) self.on_profile_modified() def on_profiles_loaded(self, profiles): for ps in self.profile_switchers: ps.set_profile_list(profiles) def on_dlgNewProfile_delete_event(self, dlg, *a): dlg.hide() return True def on_btNewProfile_clicked(self, *a): """ Called when new profile name is set and OK is clicked """ txNewProfile = self.builder.get_object("txNewProfile") dlg = self.builder.get_object("dlgNewProfile") self.new_profile(self.current, txNewProfile.get_text()) dlg.hide() def on_profile_modified(self, *a): """ Called when selected profile is modified in memory. """ self.profile_switchers[0].set_profile_modified(True) if not self.current_file.get_path().endswith(".mod"): mod = self.current_file.get_path() + ".mod" self.current_file = Gio.File.new_for_path(mod) self.save_profile(self.current_file, self.current) def on_profile_loaded(self, profile, giofile): self.current = profile self.current_file = giofile self.profile_switchers[0].set_profile_modified(False) for b in self.button_widgets.values(): b.update() def on_profile_selected(self, ps, name, giofile): if ps == self.profile_switchers[0]: self.load_profile(giofile) if ps.get_controller(): ps.get_controller().set_profile(giofile.get_path()) def on_unknown_profile(self, ps, name): log.warn("Daemon reported unknown profile: '%s'; Overriding.", name) if self.current_file is not None: ps.get_controller().set_profile(self.current_file.get_path()) def on_save_clicked(self, *a): if self.current_file.get_path().endswith(".mod"): orig = self.current_file.get_path()[0:-4] self.current_file = Gio.File.new_for_path(orig) self.save_profile(self.current_file, self.current) def on_profile_saved(self, giofile, send=True): """ Called when selected profile is saved to disk """ if giofile.get_path().endswith(".mod"): # Special case, this one is saved only to be sent to daemon # and user doesn't need to know about it if self.dm.is_alive(): self.dm.set_profile(giofile.get_path()) return self.profile_switchers[0].set_profile_modified(False) if send and self.dm.is_alive() and not self.daemon_changed_profile: self.dm.set_profile(giofile.get_path()) self.current_file = giofile def on_new_clicked(self, ps, name): new_name = _("Copy of %s") % (name,) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") i = 0 while os.path.exists(filename): i += 1 new_name = _("Copy of %s (%s)") % (name, i) filename = os.path.join(get_profiles_path(), new_name + ".sccprofile") dlg = self.builder.get_object("dlgNewProfile") txNewProfile = self.builder.get_object("txNewProfile") txNewProfile.set_text(new_name) dlg.set_transient_for(self.window) dlg.show() def on_action_chosen(self, id, action): before = self.set_action(self.current, id, action) if before.to_string() != action.to_string(): # TODO: Maybe better comparison self.undo.append(UndoRedo(id, before, action)) self.builder.get_object("btUndo").set_sensitive(True) self.on_profile_modified() def on_background_area_hover(self, trash, area): self.hint(area) def on_background_area_click(self, trash, area): if area in [ x.name for x in BUTTONS ]: self.hint(None) self.show_editor(getattr(SCButtons, area)) elif area in TRIGGERS + STICKS + PADS: self.hint(None) self.show_editor(area) def on_vbc_allocated(self, vbc, allocation): """ Called when size of 'Button C' is changed. Centers button on background image """ main_area = self.builder.get_object("mainArea") x = (main_area.get_allocation().width - allocation.width) / 2 y = main_area.get_allocation().height - allocation.height main_area.move(vbc, x, y) def on_ebImage_motion_notify_event(self, box, event): self.background.on_mouse_moved(event.x, event.y) def on_mnuExit_activate(self, *a): self.quit() def on_mnuAbout_activate(self, *a): from scc.gui.aboutdialog import AboutDialog AboutDialog(self).show(self.window) def on_daemon_alive(self, *a): self.set_daemon_status("alive", True) self.hide_error() self.just_started = False if self.profile_switchers[0].get_file() is not None and not self.just_started: self.dm.set_profile(self.current_file.get_path()) GLib.timeout_add_seconds(1, self.check) self.enable_test_mode() def on_daemon_ccunt_changed(self, daemon, count): if (self.controller_count, count) == (0, 1): # First controller connected # # 'event' signal should be connected only on first controller, # so this block is executed only when number of connected # controllers changes from 0 to 1 c = self.dm.get_controllers()[0] c.connect('event', self.on_daemon_event_observer) elif count > self.controller_count: # Controller added while len(self.profile_switchers) < count: s = self.add_switcher() elif count < self.controller_count: # Controller removed while len(self.profile_switchers) > max(1, count): s = self.profile_switchers.pop() s.set_controller(None) self.remove_switcher(s) # Assign controllers to widgets for i in xrange(0, count): c = self.dm.get_controllers()[i] self.profile_switchers[i].set_controller(c) if count < 1: # Special case, no controllers are connected, but one widget # has to stay on screen self.profile_switchers[0].set_controller(None) self.controller_count = count def new_profile(self, profile, name): filename = os.path.join(get_profiles_path(), name + ".sccprofile") self.current_file = Gio.File.new_for_path(filename) self.save_profile(self.current_file, profile) def add_switcher(self, margin_left=30, margin_right=40, margin_bottom=2): """ Adds new profile switcher widgets on top of window. Called when new controller is connected to daemon. Returns generated ProfileSwitcher instance. """ vbAllProfiles = self.builder.get_object("vbAllProfiles") ps = ProfileSwitcher(self.imagepath, self.config) ps.set_margin_left(margin_left) ps.set_margin_right(margin_right) ps.set_margin_bottom(margin_bottom) ps.connect('right-clicked', self.on_profile_right_clicked) vbAllProfiles.pack_start(ps, False, False, 0) vbAllProfiles.reorder_child(ps, 0) vbAllProfiles.show_all() if len(self.profile_switchers) > 0: ps.set_profile_list(self.profile_switchers[0].get_profile_list()) self.profile_switchers.append(ps) ps.connect('changed', self.on_profile_selected) ps.connect('unknown-profile', self.on_unknown_profile) return ps def remove_switcher(self, s): """ Removes given profile switcher from UI. """ vbAllProfiles = self.builder.get_object("vbAllProfiles") vbAllProfiles.remove(s) s.destroy() def enable_test_mode(self): """ Disables and re-enables Input Test mode. If sniffing is disabled in daemon configuration, 2nd call fails and logs error. """ if self.dm.is_alive(): try: c = self.dm.get_controllers()[0] except IndexError: # Zero controllers return c.unlock_all() c.observe(DaemonManager.nocallback, self.on_observe_failed, 'A', 'B', 'C', 'X', 'Y', 'START', 'BACK', 'LB', 'RB', 'LPAD', 'RPAD', 'LGRIP', 'RGRIP', 'LT', 'RT', 'LEFT', 'RIGHT', 'STICK', 'STICKPRESS') def on_observe_failed(self, error): log.debug("Failed to enable test mode: %s", error) def on_daemon_version(self, daemon, version): """ Checks if reported version matches expected one. If not, daemon is restarted. """ if version != DAEMON_VERSION and self.outdated_version != version: log.warning( "Running daemon instance is too old (version %s, expected %s). Restarting...", version, DAEMON_VERSION) self.outdated_version = version self.set_daemon_status("unknown", False) self.dm.restart() def on_daemon_error(self, daemon, error): log.debug("Daemon reported error '%s'", error) msg = _('There was an error with enabling emulation: <b>%s</b>') % (error,) # Known errors are handled with aditional message if "Device not found" in error: msg += "\n" + _("Please, check if you have reciever dongle connected to USB port.") elif "LIBUSB_ERROR_ACCESS" in error: msg += "\n" + _("You don't have access to controller device.") msg += "\n\n" + ( _("Consult your distribution manual, try installing Steam package or <a href='%s'>install required udev rules manually</a>.") % 'https://wiki.archlinux.org/index.php/Gamepad#Steam_Controller_Not_Pairing' ) # TODO: Write howto somewhere instead of linking to ArchWiki elif "LIBUSB_ERROR_BUSY" in error: msg += "\n" + _("Another application (most likely Steam) is using the controller.") elif "LIBUSB_ERROR_PIPE" in error: msg += "\n" + _("USB dongle was removed.") self.show_error(msg) self.set_daemon_status("error", True) def on_daemon_event_observer(self, daemon, what, data): if what in (LEFT, RIGHT, STICK): widget, area = { LEFT : (self.lpadTest, "LPADTEST"), RIGHT : (self.rpadTest, "RPADTEST"), STICK : (self.stickTest, "STICKTEST"), }[what] # Check if stick or pad is released if data[0] == data[1] == 0: widget.hide() return if not widget.is_visible(): widget.show() # Grab values ax, ay, aw, trash = self.background.get_area_position(area) cw = widget.get_allocation().width # Compute center x, y = ax + aw * 0.5 - cw * 0.5, ay + 1.0 - cw * 0.5 # Add pad position x += data[0] * aw / STICK_PAD_MAX * 0.5 y -= data[1] * aw / STICK_PAD_MAX * 0.5 # Move circle self.main_area.move(widget, x, y) elif what in ("LT", "RT", "STICKPRESS"): what = { "LT" : "LEFT", "RT" : "RIGHT", "STICKPRESS" : "STICK" }[what] if data[0]: self.hilights[App.OBSERVE_COLOR].add(what) else: self.hilights[App.OBSERVE_COLOR].remove(what) self._update_background() elif hasattr(SCButtons, what): if data[0]: self.hilights[App.OBSERVE_COLOR].add(what) else: self.hilights[App.OBSERVE_COLOR].remove(what) self._update_background() else: print "event", what def on_profile_right_clicked(self, ps): for name in ("mnuConfigureController", "mnuTurnoffController"): # Disable controller-related menu items if controller is not connected obj = self.builder.get_object(name) obj.set_sensitive(ps.get_controller() is not None) mnuPS = self.builder.get_object("mnuPS") mnuPS.ps = ps mnuPS.popup(None, None, None, None, 3, Gtk.get_current_event_time()) def on_mnuConfigureController_activate(self, *a): from scc.gui.controller_settings import ControllerSettings mnuPS = self.builder.get_object("mnuPS") cs = ControllerSettings(self, mnuPS.ps.get_controller(), mnuPS.ps) cs.show(self.window) def mnuTurnoffController_activate(self, *a): mnuPS = self.builder.get_object("mnuPS") if mnuPS.ps.get_controller(): mnuPS.ps.get_controller().turnoff() def show_error(self, message): if self.ribar is None: self.ribar = RIBar(message, Gtk.MessageType.ERROR) content = self.builder.get_object("content") content.pack_start(self.ribar, False, False, 1) content.reorder_child(self.ribar, 0) self.ribar.connect("close", self.hide_error) self.ribar.connect("response", self.hide_error) else: self.ribar.get_label().set_markup(message) self.ribar.show() self.ribar.set_reveal_child(True) def hide_error(self, *a): if self.ribar is not None: if self.ribar.get_parent() is not None: self.ribar.get_parent().remove(self.ribar) self.ribar = None def on_daemon_reconfigured(self, *a): log.debug("Reloading config...") self.config.reload() for ps in self.profile_switchers: ps.set_controller(ps.get_controller()) def on_daemon_dead(self, *a): if self.just_started: self.dm.restart() self.just_started = False self.set_daemon_status("unknown", True) return for ps in self.profile_switchers: ps.set_controller(None) ps.on_daemon_dead() self.set_daemon_status("dead", False) def on_mnuEmulationEnabled_toggled(self, cb): if self.recursing : return if cb.get_active(): # Turning daemon on self.set_daemon_status("unknown", True) cb.set_sensitive(False) self.dm.start() else: # Turning daemon off self.set_daemon_status("unknown", False) cb.set_sensitive(False) self.hide_error() self.dm.stop() def do_startup(self, *a): Gtk.Application.do_startup(self, *a) self.load_profile_list() self.setup_widgets() if self.app.config['gui']['enable_status_icon']: self.setup_statusicon() self.set_daemon_status("unknown", True) def do_local_options(self, trash, lo): set_logging_level(lo.contains("verbose"), lo.contains("debug") ) return -1 def do_command_line(self, cl): Gtk.Application.do_command_line(self, cl) if len(cl.get_arguments()) > 1: filename = cl.get_arguments()[-1] giofile = Gio.File.new_for_path(filename) # Local file, looks like vdf profile from scc.gui.import_dialog import ImportDialog gs = ImportDialog(self) def i_told_you_to_quit(*a): sys.exit(0) gs.window.connect('destroy', i_told_you_to_quit) gs.show(self.window) # Skip first screen and try to import this file gs.on_preload_finished(gs.set_file, giofile.get_path()) else: self.activate() return 0 def do_activate(self, *a): self.builder.get_object("window").show() def remove_dot_profile(self): """ Checks if first profile in list begins with dot and if yes, removes it. This is done to undo automatic addition that is done when daemon reports selecting such profile. """ cb = self.builder.get_object("cbProfile") model = cb.get_model() if len(model) == 0: # Nothing to remove return if not model[0][0].startswith("."): # Not dot profile return active = model.get_path(cb.get_active_iter()) first = model[0].path if active == first: # Can't remove active item return model.remove(model[0].iter) def set_daemon_status(self, status, daemon_runs): """ Updates image that shows daemon status and menu shown when image is clicked """ log.debug("daemon status: %s", status) icon = os.path.join(self.imagepath, "scc-%s.svg" % (status,)) imgDaemonStatus = self.builder.get_object("imgDaemonStatus") btDaemon = self.builder.get_object("btDaemon") mnuEmulationEnabled = self.builder.get_object("mnuEmulationEnabled") imgDaemonStatus.set_from_file(icon) mnuEmulationEnabled.set_sensitive(True) self.window.set_icon_from_file(icon) self.status = status if self.statusicon: GLib.idle_add(self.statusicon.set, "scc-%s" % (self.status,), _("SC-Controller")) self.recursing = True if status == "alive": btDaemon.set_tooltip_text(_("Emulation is active")) elif status == "error": btDaemon.set_tooltip_text(_("Error enabling emulation")) elif status == "dead": btDaemon.set_tooltip_text(_("Emulation is inactive")) else: btDaemon.set_tooltip_text(_("Checking emulation status...")) mnuEmulationEnabled.set_active(daemon_runs) self.recursing = False def setup_commandline(self): def aso(long_name, short_name, description, arg=GLib.OptionArg.NONE, flags=GLib.OptionFlags.IN_MAIN): """ add_simple_option, adds program argument in simple way """ o = GLib.OptionEntry() if short_name: o.long_name = long_name o.short_name = short_name o.description = description o.flags = flags o.arg = arg self.add_main_option_entries([o]) self.connect('handle-local-options', self.do_local_options) aso("verbose", b"v", "Be verbose") aso("debug", b"d", "Be more verbose (debug mode)") def save_profile_selection(self, path): """ Saves name of profile into config file """ name = os.path.split(path)[-1] if name.endswith(".sccprofile"): name = name[0:-11] data = dict(current_profile=name) jstr = json.dumps(data, sort_keys=True, indent=4) open(os.path.join(get_config_path(), self.CONFIG), "w").write(jstr) def load_profile_selection(self): """ Returns name profile from config file or None if there is none saved """ try: data = json.loads(open(os.path.join(get_config_path(), self.CONFIG), "r").read()) return data['current_profile'] except: return None def on_drag_data_received(self, widget, context, x, y, data, info, time): """ Drag-n-drop handler """ if str(data.get_data_type()) == "text/uri-list": # Only file can be dropped here if len(data.get_uris()): uri = data.get_uris()[0] giofile = Gio.File.new_for_uri(uri) if giofile.get_path(): path = giofile.get_path() if path.endswith(".vdf") or path.endswith(".vdffz"): # Local file, looks like vdf profile from scc.gui.import_dialog import ImportDialog gs = ImportDialog(self) gs.show(self.window) # Skip first screen and try to import this file gs.on_preload_finished(gs.set_file, giofile.get_path())