class Controls:
def __init__(self, sm=None, pm=None, can_sock=None, CI=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.camera_packets = ["roadCameraState", "driverCameraState"]
if TICI:
self.camera_packets.append("wideRoadCameraState")
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
if TICI:
self.log_sock = messaging.sub_sock('androidLog')
if CI is None:
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
else:
self.CI, self.CP = CI, CI.CP
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode") or (
self.CP.notCar and sm is None)
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster(
[
'deviceState', 'pandaStates', 'peripheralState', 'modelV2',
'liveCalibration', 'driverMonitoringState',
'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'managerState', 'liveParameters', 'radarState'
] + self.camera_packets + joystick_packet,
ignore_alive=ignore,
ignore_avg_freq=['radarState', 'longitudinalPlan'])
# set alternative experiences from parameters
self.disengage_on_accelerator = params.get_bool(
"DisengageOnAccelerator")
self.CP.alternativeExperience = 0
if not self.disengage_on_accelerator:
self.CP.alternativeExperience |= ALTERNATIVE_EXPERIENCE.DISABLE_DISENGAGE_ON_GAS
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
self.read_only = not car_recognized or not controller_available or self.CP.dashcamOnly
if self.read_only:
safety_config = car.CarParams.SafetyConfig.new_message()
safety_config.safetyModel = car.CarParams.SafetyModel.noOutput
self.CP.safetyConfigs = [safety_config]
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.CS_prev = car.CarState.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP, self.CI)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.cruise_mismatch_counter = 0
self.can_rcv_error_counter = 0
self.last_blinker_frame = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.button_timers = {
ButtonEvent.Type.decelCruise: 0,
ButtonEvent.Type.accelCruise: 0
}
self.last_actuators = car.CarControl.Actuators.new_message()
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available,
len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if len(self.CP.carFw) > 0:
set_offroad_alert("Offroad_CarUnrecognized", True)
else:
set_offroad_alert("Offroad_NoFirmware", True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
# Add startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Don't add any more events if not initialized
if not self.initialized:
self.events.add(EventName.controlsInitializing)
return
# Disable on rising edge of accelerator or brake. Also disable on brake when speed > 0
if (CS.gasPressed and not self.CS_prev.gasPressed and self.disengage_on_accelerator) or \
(CS.brakePressed and (not self.CS_prev.brakePressed or not CS.standstill)):
self.events.add(EventName.pedalPressed)
if CS.gasPressed:
self.events.add(
EventName.pedalPressedPreEnable if self.
disengage_on_accelerator else EventName.gasPressedOverride)
self.events.add_from_msg(CS.events)
if not self.CP.notCar:
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Create events for battery, temperature, disk space, and memory
if EON and (self.sm['peripheralState'].pandaType != PandaType.uno) and \
self.sm['deviceState'].batteryPercent < 1 and self.sm['deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7 and not SIMULATION:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
# TODO: make tici threshold the same
if self.sm['deviceState'].memoryUsagePercent > (90 if TICI else
65) and not SIMULATION:
self.events.add(EventName.lowMemory)
# TODO: enable this once loggerd CPU usage is more reasonable
#cpus = list(self.sm['deviceState'].cpuUsagePercent)[:(-1 if EON else None)]
#if max(cpus, default=0) > 95 and not SIMULATION:
# self.events.add(EventName.highCpuUsage)
# Alert if fan isn't spinning for 5 seconds
if self.sm['peripheralState'].pandaType in (PandaType.uno,
PandaType.dos):
if self.sm['peripheralState'].fanSpeedRpm == 0 and self.sm[
'deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame -
self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm[
'lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in (
LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing):
self.events.add(EventName.laneChange)
if not CS.canValid:
self.events.add(EventName.canError)
for i, pandaState in enumerate(self.sm['pandaStates']):
# All pandas must match the list of safetyConfigs, and if outside this list, must be silent or noOutput
if i < len(self.CP.safetyConfigs):
safety_mismatch = pandaState.safetyModel != self.CP.safetyConfigs[i].safetyModel or \
pandaState.safetyParam != self.CP.safetyConfigs[i].safetyParam or \
pandaState.alternativeExperience != self.CP.alternativeExperience
else:
safety_mismatch = pandaState.safetyModel not in IGNORED_SAFETY_MODES
if safety_mismatch or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if log.PandaState.FaultType.relayMalfunction in pandaState.faults:
self.events.add(EventName.relayMalfunction)
# Check for HW or system issues
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.valid["pandaStates"]:
self.events.add(EventName.usbError)
elif not self.sm.all_checks() or self.can_rcv_error:
if not self.sm.all_alive():
self.events.add(EventName.commIssue)
elif not self.sm.all_freq_ok():
self.events.add(EventName.commIssueAvgFreq)
else: # invalid or can_rcv_error.
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
invalid = [
s for s, valid in self.sm.valid.items() if not valid
]
not_alive = [
s for s, alive in self.sm.alive.items() if not alive
]
not_freq_ok = [
s for s, freq_ok in self.sm.freq_ok.items() if not freq_ok
]
cloudlog.event("commIssue",
invalid=invalid,
not_alive=not_alive,
not_freq_ok=not_freq_ok,
can_error=self.can_rcv_error,
error=True)
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if not self.sm['lateralPlan'].mpcSolutionValid:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if not REPLAY:
# Check for mismatch between openpilot and car's PCM
cruise_mismatch = CS.cruiseState.enabled and (
not self.enabled or not self.CP.pcmCruise)
self.cruise_mismatch_counter = self.cruise_mismatch_counter + 1 if cruise_mismatch else 0
if self.cruise_mismatch_counter > int(3. / DT_CTRL):
self.events.add(EventName.cruiseMismatch)
# Check for FCW
stock_long_is_braking = self.enabled and not self.CP.openpilotLongitudinalControl and CS.aEgo < -1.25
model_fcw = self.sm[
'modelV2'].meta.hardBrakePredicted and not CS.brakePressed and not stock_long_is_braking
planner_fcw = self.sm['longitudinalPlan'].fcw and self.enabled
if planner_fcw or model_fcw:
self.events.add(EventName.fcw)
if TICI:
for m in messaging.drain_sock(self.log_sock, wait_for_one=False):
try:
msg = m.androidLog.message
if any(err in msg for err in ("ERROR_CRC", "ERROR_ECC",
"ERROR_STREAM_UNDERFLOW",
"APPLY FAILED")):
csid = msg.split("CSID:")[-1].split(" ")[0]
evt = CSID_MAP.get(csid, None)
if evt is not None:
self.events.add(evt)
except UnicodeDecodeError:
pass
# TODO: fix simulator
if not SIMULATION:
if not NOSENSOR:
if not self.sm['liveLocationKalman'].gpsOK and (
self.distance_traveled > 1000):
# Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
self.events.add(EventName.noGps)
if not self.sm.all_alive(self.camera_packets):
self.events.add(EventName.cameraMalfunction)
elif not self.sm.all_freq_ok(self.camera_packets):
self.events.add(EventName.cameraFrameRate)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
if self.sm['liveLocationKalman'].excessiveResets:
self.events.add(EventName.localizerMalfunction)
# Check if all manager processes are running
not_running = {
p.name
for p in self.sm['managerState'].processes if not p.running
}
if self.sm.rcv_frame['managerState'] and (not_running -
IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
speeds = self.sm['longitudinalPlan'].speeds
if len(speeds) > 1:
v_future = speeds[-1]
else:
v_future = 100.0
if CS.brakePressed and v_future >= self.CP.vEgoStarting \
and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
self.events.add(EventName.noTarget)
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
if not self.initialized:
all_valid = CS.canValid and self.sm.all_checks()
if all_valid or self.sm.frame * DT_CTRL > 3.5 or SIMULATION:
if not self.read_only:
self.CI.init(self.CP, self.can_sock,
self.pm.sock['sendcan'])
self.initialized = True
if REPLAY and self.sm['pandaStates'][0].controlsAllowed:
self.state = State.enabled
Params().put_bool("ControlsReady", True)
# Check for CAN timeout
if not can_strs:
self.can_rcv_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
# All pandas not in silent mode must have controlsAllowed when openpilot is enabled
if self.enabled and any(not ps.controlsAllowed
for ps in self.sm['pandaStates']
if ps.safetyModel not in IGNORED_SAFETY_MODES):
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
if not self.CP.pcmCruise:
self.v_cruise_kph = update_v_cruise(self.v_cruise_kph,
CS.buttonEvents,
self.button_timers,
self.enabled, self.is_metric)
else:
if CS.cruiseState.available:
self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
else:
self.v_cruise_kph = 0
# decrement the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, SOFT DISABLING, PRE ENABLING, OVERRIDING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = int(SOFT_DISABLE_TIME /
DT_CTRL)
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.events.any(ET.OVERRIDE):
self.state = State.overriding
self.current_alert_types.append(ET.OVERRIDE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if self.events.any(ET.NO_ENTRY):
self.state = State.disabled
self.current_alert_types.append(ET.NO_ENTRY)
elif not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# OVERRIDING
elif self.state == State.overriding:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = int(SOFT_DISABLE_TIME /
DT_CTRL)
self.current_alert_types.append(ET.SOFT_DISABLE)
elif not self.events.any(ET.OVERRIDE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.OVERRIDE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
elif self.events.any(ET.OVERRIDE):
self.state = State.overriding
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
if not self.CP.pcmCruise:
self.v_cruise_kph = initialize_v_cruise(
CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if openpilot is engaged and actuators are enabled
self.enabled = self.state in ENABLED_STATES
self.active = self.state in ACTIVE_STATES
if self.active:
self.current_alert_types.append(ET.WARNING)
def state_control(self, CS):
"""Given the state, this function returns a CarControl packet"""
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
sr = max(params.steerRatio, 0.1)
self.VM.update_params(x, sr)
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
CC = car.CarControl.new_message()
CC.enabled = self.enabled
# Check which actuators can be enabled
CC.latActive = self.active and not CS.steerFaultTemporary and not CS.steerFaultPermanent and \
CS.vEgo > self.CP.minSteerSpeed and not CS.standstill
CC.longActive = self.active and not self.events.any(ET.OVERRIDE)
actuators = CC.actuators
actuators.longControlState = self.LoC.long_control_state
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not CC.latActive:
self.LaC.reset()
if not CC.longActive:
self.LoC.reset(v_pid=CS.vEgo)
if not self.joystick_mode:
# accel PID loop
pid_accel_limits = self.CI.get_pid_accel_limits(
self.CP, CS.vEgo, self.v_cruise_kph * CV.KPH_TO_MS)
t_since_plan = (self.sm.frame -
self.sm.rcv_frame['longitudinalPlan']) * DT_CTRL
actuators.accel = self.LoC.update(CC.longActive, CS, self.CP,
long_plan, pid_accel_limits,
t_since_plan)
# Steering PID loop and lateral MPC
desired_curvature, desired_curvature_rate = get_lag_adjusted_curvature(
self.CP, CS.vEgo, lat_plan.psis, lat_plan.curvatures,
lat_plan.curvatureRates)
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(
CC.latActive, CS, self.CP, self.VM, params,
self.last_actuators, desired_curvature, desired_curvature_rate)
else:
lac_log = log.ControlsState.LateralDebugState.new_message()
if self.sm.rcv_frame['testJoystick'] > 0:
if CC.longActive:
actuators.accel = 4.0 * clip(
self.sm['testJoystick'].axes[0], -1, 1)
if CC.latActive:
steer = clip(self.sm['testJoystick'].axes[1], -1, 1)
# max angle is 45 for angle-based cars
actuators.steer, actuators.steeringAngleDeg = steer, steer * 45.
lac_log.active = self.active
lac_log.steeringAngleDeg = CS.steeringAngleDeg
lac_log.output = actuators.steer
lac_log.saturated = abs(actuators.steer) >= 0.9
# Send a "steering required alert" if saturation count has reached the limit
if lac_log.active and lac_log.saturated and not CS.steeringPressed:
dpath_points = lat_plan.dPathPoints
if len(dpath_points):
# Check if we deviated from the path
# TODO use desired vs actual curvature
left_deviation = actuators.steer > 0 and dpath_points[0] < -0.20
right_deviation = actuators.steer < 0 and dpath_points[0] > 0.20
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
# Ensure no NaNs/Infs
for p in ACTUATOR_FIELDS:
attr = getattr(actuators, p)
if not isinstance(attr, Number):
continue
if not math.isfinite(attr):
cloudlog.error(
f"actuators.{p} not finite {actuators.to_dict()}")
setattr(actuators, p, 0.0)
return CC, lac_log
def update_button_timers(self, buttonEvents):
# increment timer for buttons still pressed
for k in self.button_timers:
if self.button_timers[k] > 0:
self.button_timers[k] += 1
for b in buttonEvents:
if b.type.raw in self.button_timers:
self.button_timers[b.type.raw] = 1 if b.pressed else 0
def publish_logs(self, CS, start_time, CC, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
# Orientation and angle rates can be useful for carcontroller
# Only calibrated (car) frame is relevant for the carcontroller
orientation_value = list(
self.sm['liveLocationKalman'].calibratedOrientationNED.value)
if len(orientation_value) > 2:
CC.orientationNED = orientation_value
angular_rate_value = list(
self.sm['liveLocationKalman'].angularVelocityCalibrated.value)
if len(angular_rate_value) > 2:
CC.angularVelocity = angular_rate_value
CC.cruiseControl.cancel = CS.cruiseState.enabled and (
not self.enabled or not self.CP.pcmCruise)
if self.joystick_mode and self.sm.rcv_frame[
'testJoystick'] > 0 and self.sm['testJoystick'].buttons[0]:
CC.cruiseControl.cancel = True
hudControl = CC.hudControl
hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
hudControl.speedVisible = self.enabled
hudControl.lanesVisible = self.enabled
hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
hudControl.rightLaneVisible = True
hudControl.leftLaneVisible = True
recent_blinker = (self.sm.frame - self.last_blinker_frame
) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not CC.latActive and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
model_v2 = self.sm['modelV2']
desire_prediction = model_v2.meta.desirePrediction
if len(desire_prediction) and ldw_allowed:
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
l_lane_change_prob = desire_prediction[Desire.laneChangeLeft - 1]
r_lane_change_prob = desire_prediction[Desire.laneChangeRight - 1]
lane_lines = model_v2.laneLines
l_lane_close = left_lane_visible and (lane_lines[1].y[0] >
-(1.08 + CAMERA_OFFSET))
r_lane_close = right_lane_visible and (lane_lines[2].y[0] <
(1.08 - CAMERA_OFFSET))
hudControl.leftLaneDepart = bool(
l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
hudControl.rightLaneDepart = bool(
r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if hudControl.rightLaneDepart or hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event_types = set()
if ET.WARNING not in self.current_alert_types:
clear_event_types.add(ET.WARNING)
if self.enabled:
clear_event_types.add(ET.NO_ENTRY)
alerts = self.events.create_alerts(
self.current_alert_types,
[self.CP, self.sm, self.is_metric, self.soft_disable_timer])
self.AM.add_many(self.sm.frame, alerts)
current_alert = self.AM.process_alerts(self.sm.frame,
clear_event_types)
if current_alert:
hudControl.visualAlert = current_alert.visual_alert
if not self.read_only and self.initialized:
# send car controls over can
self.last_actuators, can_sends = self.CI.apply(CC)
self.pm.send(
'sendcan',
can_list_to_can_capnp(can_sends,
msgtype='sendcan',
valid=CS.canValid))
CC.actuatorsOutput = self.last_actuators
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg -
params.angleOffsetDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset,
CS.vEgo, params.roll)
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
if current_alert:
controlsState.alertText1 = current_alert.alert_text_1
controlsState.alertText2 = current_alert.alert_text_2
controlsState.alertSize = current_alert.alert_size
controlsState.alertStatus = current_alert.alert_status
controlsState.alertBlinkingRate = current_alert.alert_rate
controlsState.alertType = current_alert.alert_type
controlsState.alertSound = current_alert.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime[
'longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_rcv_error_counter
lat_tuning = self.CP.lateralTuning.which()
if self.joystick_mode:
controlsState.lateralControlState.debugState = lac_log
elif self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif lat_tuning == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif lat_tuning == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif lat_tuning == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL)
== 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
cloudlog.timestamp("Data sampled")
self.prof.checkpoint("Sample")
self.update_events(CS)
cloudlog.timestamp("Events updated")
if not self.read_only and self.initialized:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
CC, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, CC, lac_log)
self.prof.checkpoint("Sent")
self.update_button_timers(CS.buttonEvents)
self.CS_prev = CS
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.camera_packets = ["roadCameraState", "driverCameraState"]
if TICI:
self.camera_packets.append("wideRoadCameraState")
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode")
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster(
[
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'managerState', 'liveParameters',
'radarState'
] + self.camera_packets + joystick_packet,
ignore_alive=ignore,
ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
if TICI:
self.log_sock = messaging.sub_sock('androidLog')
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or \
self.CP.fingerprintSource == car.CarParams.FingerprintSource.can
community_feature_disallowed = community_feature and (
not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.v_target = 0.0
self.a_target = 0.0
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available,
self.CP.fuzzyFingerprint,
len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed and car_recognized and not self.CP.dashcamOnly:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Don't add any more events if not initialized
if not self.initialized:
self.events.add(EventName.controlsInitializing)
return
# Create events for battery, temperature, disk space, and memory
if self.sm['deviceState'].batteryPercent < 1 and self.sm[
'deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7 and not SIMULATION:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
# TODO: make tici threshold the same
if self.sm['deviceState'].memoryUsagePercent > (90 if TICI else
65) and not SIMULATION:
self.events.add(EventName.lowMemory)
# Alert if fan isn't spinning for 5 seconds
if self.sm['pandaState'].pandaType in [PandaType.uno, PandaType.dos]:
if self.sm['pandaState'].fanSpeedRpm == 0 and self.sm[
'deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame -
self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm[
'lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in [
LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing
]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or not CS.canValid:
self.events.add(EventName.canError)
safety_mismatch = self.sm[
'pandaState'].safetyModel != self.CP.safetyModel or self.sm[
'pandaState'].safetyParam != self.CP.safetyParam
if safety_mismatch or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.valid["pandaState"]:
self.events.add(EventName.usbError)
elif not self.sm.all_alive_and_valid():
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
invalid = [
s for s, valid in self.sm.valid.items() if not valid
]
not_alive = [
s for s, alive in self.sm.alive.items() if not alive
]
cloudlog.event("commIssue",
invalid=invalid,
not_alive=not_alive)
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
if not self.sm['lateralPlan'].mpcSolutionValid:
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if log.PandaState.FaultType.relayMalfunction in self.sm[
'pandaState'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['longitudinalPlan'].fcw or (
self.enabled and self.sm['modelV2'].meta.hardBrakePredicted):
self.events.add(EventName.fcw)
if TICI:
logs = messaging.drain_sock(self.log_sock, wait_for_one=False)
messages = []
for m in logs:
try:
messages.append(m.androidLog.message)
except UnicodeDecodeError:
pass
for err in [
"ERROR_CRC", "ERROR_ECC", "ERROR_STREAM_UNDERFLOW",
"APPLY FAILED"
]:
for m in messages:
if err not in m:
continue
csid = m.split("CSID:")[-1].split(" ")[0]
evt = {
"0": EventName.roadCameraError,
"1": EventName.wideRoadCameraError,
"2": EventName.driverCameraError
}.get(csid, None)
if evt is not None:
self.events.add(evt)
# TODO: fix simulator
if not SIMULATION:
if not NOSENSOR:
if not self.sm['liveLocationKalman'].gpsOK and (
self.distance_traveled > 1000):
# Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
self.events.add(EventName.noGps)
if not self.sm.all_alive(self.camera_packets):
self.events.add(EventName.cameraMalfunction)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
if self.sm['liveLocationKalman'].excessiveResets:
self.events.add(EventName.localizerMalfunction)
# Check if all manager processes are running
not_running = set(p.name for p in self.sm['managerState'].processes
if not p.running)
if self.sm.rcv_frame['managerState'] and (not_running -
IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
speeds = self.sm['longitudinalPlan'].speeds
if len(speeds) > 1:
v_future = speeds[-1]
else:
v_future = 100.0
if CS.brakePressed and v_future >= STARTING_TARGET_SPEED \
and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
self.events.add(EventName.noTarget)
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
all_valid = CS.canValid and self.sm.all_alive_and_valid()
if not self.initialized and (all_valid
or self.sm.frame * DT_CTRL > 2.0):
self.CI.init(self.CP, self.can_sock, self.pm.sock['sendcan'])
self.initialized = True
Params().put_bool("ControlsReady", True)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
if not self.sm['pandaState'].controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
if not self.CP.pcmCruise:
self.v_cruise_kph = update_v_cruise(self.v_cruise_kph,
CS.buttonEvents, self.enabled)
elif self.CP.pcmCruise and CS.cruiseState.enabled:
self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 300 # 3s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(
ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
self.v_cruise_kph = initialize_v_cruise(
CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
sr = max(params.steerRatio, 0.1)
self.VM.update_params(x, sr)
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
actuators = car.CarControl.Actuators.new_message()
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
if not self.joystick_mode:
# Gas/Brake PID loop
actuators.gas, actuators.brake, self.v_target, self.a_target = self.LoC.update(
self.active, CS, self.CP, long_plan)
# Steering PID loop and lateral MPC
desired_curvature, desired_curvature_rate = get_lag_adjusted_curvature(
self.CP, CS.vEgo, lat_plan.psis, lat_plan.curvatures,
lat_plan.curvatureRates)
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(
self.active, CS, self.CP, self.VM, params, desired_curvature,
desired_curvature_rate)
else:
lac_log = log.ControlsState.LateralDebugState.new_message()
if self.sm.rcv_frame['testJoystick'] > 0 and self.active:
gb = clip(self.sm['testJoystick'].axes[0], -1, 1)
actuators.gas, actuators.brake = max(gb, 0), max(-gb, 0)
steer = clip(self.sm['testJoystick'].axes[1], -1, 1)
# max angle is 45 for angle-based cars
actuators.steer, actuators.steeringAngleDeg = steer, steer * 45.
lac_log.active = True
lac_log.steeringAngleDeg = CS.steeringAngleDeg
lac_log.output = steer
lac_log.saturated = abs(steer) >= 0.9
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steeringAngleDeg - CS.steeringAngleDeg) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
if len(lat_plan.dPathPoints):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and lat_plan.dPathPoints[
0] < -0.1
right_deviation = actuators.steer < 0 and lat_plan.dPathPoints[
0] > 0.1
if left_deviation or right_deviation:
self.events.add(EventName.steerSaturated)
return actuators, lac_log
def publish_logs(self, CS, start_time, actuators, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = not self.CP.pcmCruise or (
not self.enabled and CS.cruiseState.enabled)
if self.joystick_mode and self.sm.rcv_frame[
'testJoystick'] > 0 and self.sm['testJoystick'].buttons[0]:
CC.cruiseControl.cancel = True
# TODO remove car specific stuff in controls
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0))
speed_override = max(0.0,
(self.LoC.v_pid + CS.cruiseState.speedOffset) *
brake_discount)
CC.cruiseControl.speedOverride = float(
speed_override if self.CP.pcmCruise else 0.0)
CC.cruiseControl.accelOverride = float(
self.CI.calc_accel_override(CS.aEgo, self.a_target, CS.vEgo,
self.v_target))
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
CC.hudControl.rightLaneVisible = bool(right_lane_visible)
CC.hudControl.leftLaneVisible = bool(left_lane_visible)
recent_blinker = (self.sm.frame - self.last_blinker_frame
) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['modelV2'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft -
1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight -
1]
l_lane_close = left_lane_visible and (
self.sm['modelV2'].laneLines[1].y[0] > -(1.08 + CAMERA_OFFSET))
r_lane_close = right_lane_visible and (
self.sm['modelV2'].laneLines[2].y[0] < (1.08 - CAMERA_OFFSET))
CC.hudControl.leftLaneDepart = bool(
l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(
r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types,
[self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.read_only and self.initialized:
# send car controls over can
can_sends = self.CI.apply(CC)
self.pm.send(
'sendcan',
can_list_to_can_capnp(can_sends,
msgtype='sendcan',
valid=CS.canValid))
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg -
params.angleOffsetAverageDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset,
CS.vEgo)
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime[
'longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
if self.joystick_mode:
controlsState.lateralControlState.debugState = lac_log
elif self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL)
== 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
self.update_events(CS)
if not self.read_only and self.initialized:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, lac_log)
self.prof.checkpoint("Sent")
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()
def radard_thread(gctx=None):
set_realtime_priority(2)
# wait for stats about the car to come in from controls
cloudlog.info("radard is waiting for CarParams")
CP = car.CarParams.from_bytes(Params().get("CarParams", block=True))
mocked = CP.carName == "mock"
VM = VehicleModel(CP)
cloudlog.info("radard got CarParams")
# import the radar from the fingerprint
cloudlog.info("radard is importing %s", CP.carName)
RadarInterface = importlib.import_module('selfdrive.car.%s.radar_interface' % CP.carName).RadarInterface
sm = messaging.SubMaster(['model', 'controlsState', 'liveParameters'])
# Default parameters
live_parameters = messaging.new_message()
live_parameters.init('liveParameters')
live_parameters.liveParameters.valid = True
live_parameters.liveParameters.steerRatio = CP.steerRatio
live_parameters.liveParameters.stiffnessFactor = 1.0
MP = ModelParser()
RI = RadarInterface(CP)
last_md_ts = 0
last_controls_state_ts = 0
# *** publish radarState and liveTracks
radarState = messaging.pub_sock(service_list['radarState'].port)
liveTracks = messaging.pub_sock(service_list['liveTracks'].port)
path_x = np.arange(0.0, 140.0, 0.1) # 140 meters is max
# Time-alignment
rate = 1. / DT_MDL # model and radar are both at 20Hz
v_len = 20 # how many speed data points to remember for t alignment with rdr data
active = 0
steer_angle = 0.
steer_override = False
tracks = defaultdict(dict)
# Kalman filter stuff:
ekfv = EKFV1D()
speedSensorV = SimpleSensor(XV, 1, 2)
# v_ego
v_ego = 0.
v_ego_hist_t = deque([0], maxlen=v_len)
v_ego_hist_v = deque([0], maxlen=v_len)
v_ego_t_aligned = 0.
rk = Ratekeeper(rate, print_delay_threshold=None)
while 1:
rr = RI.update()
ar_pts = {}
for pt in rr.points:
ar_pts[pt.trackId] = [pt.dRel + RDR_TO_LDR, pt.yRel, pt.vRel, pt.measured]
sm.update(0)
if sm.updated['liveParameters']:
VM.update_params(sm['liveParameters'].stiffnessFactor, sm['liveParameters'].steerRatio)
if sm.updated['controlsState']:
active = sm['controlsState'].active
v_ego = sm['controlsState'].vEgo
steer_angle = sm['controlsState'].angleSteers
steer_override = sm['controlsState'].steerOverride
v_ego_hist_v.append(v_ego)
v_ego_hist_t.append(float(rk.frame)/rate)
last_controls_state_ts = sm.logMonoTime['controlsState']
if sm.updated['model']:
last_md_ts = sm.logMonoTime['model']
MP.update(v_ego, sm['model'])
# run kalman filter only if prob is high enough
if MP.lead_prob > 0.7:
reading = speedSensorV.read(MP.lead_dist, covar=np.matrix(MP.lead_var))
ekfv.update_scalar(reading)
ekfv.predict(DT_MDL)
# When changing lanes the distance to the lead car can suddenly change,
# which makes the Kalman filter output large relative acceleration
if mocked and abs(MP.lead_dist - ekfv.state[XV]) > 2.0:
ekfv.state[XV] = MP.lead_dist
ekfv.covar = (np.diag([MP.lead_var, ekfv.var_init]))
ekfv.state[SPEEDV] = 0.
ar_pts[VISION_POINT] = (float(ekfv.state[XV]), np.polyval(MP.d_poly, float(ekfv.state[XV])),
float(ekfv.state[SPEEDV]), False)
else:
ekfv.state[XV] = MP.lead_dist
ekfv.covar = (np.diag([MP.lead_var, ekfv.var_init]))
ekfv.state[SPEEDV] = 0.
if VISION_POINT in ar_pts:
del ar_pts[VISION_POINT]
# *** compute the likely path_y ***
if (active and not steer_override) or mocked:
# use path from model (always when mocking as steering is too noisy)
path_y = np.polyval(MP.d_poly, path_x)
else:
# use path from steer, set angle_offset to 0 it does not only report the physical offset
path_y = calc_lookahead_offset(v_ego, steer_angle, path_x, VM, angle_offset=live_parameters.liveParameters.angleOffsetAverage)[0]
# *** remove missing points from meta data ***
for ids in tracks.keys():
if ids not in ar_pts:
tracks.pop(ids, None)
# *** compute the tracks ***
for ids in ar_pts:
# ignore standalone vision point, unless we are mocking the radar
if ids == VISION_POINT and not mocked:
continue
rpt = ar_pts[ids]
# align v_ego by a fixed time to align it with the radar measurement
cur_time = float(rk.frame)/rate
v_ego_t_aligned = np.interp(cur_time - RI.delay, v_ego_hist_t, v_ego_hist_v)
d_path = np.sqrt(np.amin((path_x - rpt[0]) ** 2 + (path_y - rpt[1]) ** 2))
# add sign
d_path *= np.sign(rpt[1] - np.interp(rpt[0], path_x, path_y))
# create the track if it doesn't exist or it's a new track
if ids not in tracks:
tracks[ids] = Track()
tracks[ids].update(rpt[0], rpt[1], rpt[2], d_path, v_ego_t_aligned, rpt[3], steer_override)
# allow the vision model to remove the stationary flag if distance and rel speed roughly match
if VISION_POINT in ar_pts:
fused_id = None
best_score = NO_FUSION_SCORE
for ids in tracks:
dist_to_vision = np.sqrt((0.5*(ar_pts[VISION_POINT][0] - tracks[ids].dRel)) ** 2 + (2*(ar_pts[VISION_POINT][1] - tracks[ids].yRel)) ** 2)
rel_speed_diff = abs(ar_pts[VISION_POINT][2] - tracks[ids].vRel)
tracks[ids].update_vision_score(dist_to_vision, rel_speed_diff)
if best_score > tracks[ids].vision_score:
fused_id = ids
best_score = tracks[ids].vision_score
if fused_id is not None:
tracks[fused_id].vision_cnt += 1
tracks[fused_id].update_vision_fusion()
if DEBUG:
print("NEW CYCLE")
if VISION_POINT in ar_pts:
print("vision", ar_pts[VISION_POINT])
idens = list(tracks.keys())
track_pts = np.array([tracks[iden].get_key_for_cluster() for iden in idens])
# If we have multiple points, cluster them
if len(track_pts) > 1:
cluster_idxs = cluster_points_centroid(track_pts, 2.5)
clusters = [None] * (max(cluster_idxs) + 1)
for idx in xrange(len(track_pts)):
cluster_i = cluster_idxs[idx]
if clusters[cluster_i] is None:
clusters[cluster_i] = Cluster()
clusters[cluster_i].add(tracks[idens[idx]])
elif len(track_pts) == 1:
# TODO: why do we need this?
clusters = [Cluster()]
clusters[0].add(tracks[idens[0]])
else:
clusters = []
if DEBUG:
for i in clusters:
print(i)
# *** extract the lead car ***
lead_clusters = [c for c in clusters
if c.is_potential_lead(v_ego)]
lead_clusters.sort(key=lambda x: x.dRel)
lead_len = len(lead_clusters)
# *** extract the second lead from the whole set of leads ***
lead2_clusters = [c for c in lead_clusters
if c.is_potential_lead2(lead_clusters)]
lead2_clusters.sort(key=lambda x: x.dRel)
lead2_len = len(lead2_clusters)
# *** publish radarState ***
dat = messaging.new_message()
dat.init('radarState')
dat.valid = sm.all_alive_and_valid(service_list=['controlsState'])
dat.radarState.mdMonoTime = last_md_ts
dat.radarState.canMonoTimes = list(rr.canMonoTimes)
dat.radarState.radarErrors = list(rr.errors)
dat.radarState.controlsStateMonoTime = last_controls_state_ts
if lead_len > 0:
dat.radarState.leadOne = lead_clusters[0].toRadarState()
if lead2_len > 0:
dat.radarState.leadTwo = lead2_clusters[0].toRadarState()
else:
dat.radarState.leadTwo.status = False
else:
dat.radarState.leadOne.status = False
dat.radarState.cumLagMs = -rk.remaining*1000.
radarState.send(dat.to_bytes())
# *** publish tracks for UI debugging (keep last) ***
dat = messaging.new_message()
dat.init('liveTracks', len(tracks))
for cnt, ids in enumerate(tracks.keys()):
if DEBUG:
print("id: %4.0f x: %4.1f y: %4.1f vr: %4.1f d: %4.1f va: %4.1f vl: %4.1f vlk: %4.1f alk: %4.1f s: %1.0f v: %1.0f" % \
(ids, tracks[ids].dRel, tracks[ids].yRel, tracks[ids].vRel,
tracks[ids].dPath, tracks[ids].vLat,
tracks[ids].vLead, tracks[ids].vLeadK,
tracks[ids].aLeadK,
tracks[ids].stationary,
tracks[ids].measured))
dat.liveTracks[cnt] = {
"trackId": ids,
"dRel": float(tracks[ids].dRel),
"yRel": float(tracks[ids].yRel),
"vRel": float(tracks[ids].vRel),
"aRel": float(tracks[ids].aRel),
"stationary": bool(tracks[ids].stationary),
"oncoming": bool(tracks[ids].oncoming),
}
liveTracks.send(dat.to_bytes())
rk.monitor_time()
class Controls:
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState',
'carControl', 'carEvents', 'carParams'])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'] if SIMULATION else None
self.sm = messaging.SubMaster(['deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'roadCameraState', 'driverCameraState', 'managerState', 'liveParameters', 'radarState'], ignore_alive=ignore)
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
hw_type = messaging.recv_one(self.sm.sock['pandaState']).pandaState.pandaType
has_relay = hw_type in [PandaType.blackPanda, PandaType.uno, PandaType.dos]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'], has_relay)
# read params
params = Params()
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
# scc smoother
self.is_cruise_enabled = False
self.cruiseVirtualMaxSpeed = 0
self.clu_speed_ms = 0.
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.angle_steers_des = 0.
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['deviceState'].freeSpacePercent = 100
self.sm['driverMonitoringState'].events = []
self.sm['driverMonitoringState'].awarenessStatus = 1.
self.sm['driverMonitoringState'].faceDetected = False
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized, controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def update_events(self, CS):
"""Compute carEvents from carState"""
self.events.clear()
self.events.add_from_msg(CS.events)
self.events.add_from_msg(self.sm['driverMonitoringState'].events)
# Handle startup event
if self.startup_event is not None:
self.events.add(self.startup_event)
self.startup_event = None
# Create events for battery, temperature, disk space, and memory
if self.sm['deviceState'].batteryPercent < 1 and self.sm['deviceState'].chargingError:
# at zero percent battery, while discharging, OP should not allowed
self.events.add(EventName.lowBattery)
if self.sm['deviceState'].thermalStatus >= ThermalStatus.red:
self.events.add(EventName.overheat)
if self.sm['deviceState'].freeSpacePercent < 7:
# under 7% of space free no enable allowed
self.events.add(EventName.outOfSpace)
if self.sm['deviceState'].memoryUsagePercent > 90:
self.events.add(EventName.lowMemory)
# Alert if fan isn't spinning for 5 seconds
if self.sm['pandaState'].pandaType in [PandaType.uno, PandaType.dos]:
if self.sm['pandaState'].fanSpeedRpm == 0 and self.sm['deviceState'].fanSpeedPercentDesired > 50:
if (self.sm.frame - self.last_functional_fan_frame) * DT_CTRL > 5.0:
self.events.add(EventName.fanMalfunction)
else:
self.last_functional_fan_frame = self.sm.frame
# Handle calibration status
cal_status = self.sm['liveCalibration'].calStatus
if cal_status != Calibration.CALIBRATED:
if cal_status == Calibration.UNCALIBRATED:
self.events.add(EventName.calibrationIncomplete)
else:
self.events.add(EventName.calibrationInvalid)
# Handle lane change
if self.sm['lateralPlan'].laneChangeState == LaneChangeState.preLaneChange:
direction = self.sm['lateralPlan'].laneChangeDirection
if (CS.leftBlindspot and direction == LaneChangeDirection.left) or \
(CS.rightBlindspot and direction == LaneChangeDirection.right):
self.events.add(EventName.laneChangeBlocked)
elif self.sm['lateralPlan'].autoLaneChangeEnabled and self.sm['lateralPlan'].autoLaneChangeTimer > 0:
self.events.add(EventName.autoLaneChange)
else:
if direction == LaneChangeDirection.left:
self.events.add(EventName.preLaneChangeLeft)
else:
self.events.add(EventName.preLaneChangeRight)
elif self.sm['lateralPlan'].laneChangeState in [LaneChangeState.laneChangeStarting,
LaneChangeState.laneChangeFinishing]:
self.events.add(EventName.laneChange)
if self.can_rcv_error or (not CS.canValid and self.sm.frame > 5 / DT_CTRL):
self.events.add(EventName.canError)
safety_mismatch = self.sm['pandaState'].safetyModel != self.CP.safetyModel
safety_mismatch = safety_mismatch or self.sm['pandaState'].safetyParam != self.CP.safetyParam
if (safety_mismatch and self.sm.frame > 2 / DT_CTRL) or self.mismatch_counter >= 200:
self.events.add(EventName.controlsMismatch)
if not self.sm['liveParameters'].valid:
self.events.add(EventName.vehicleModelInvalid)
if len(self.sm['radarState'].radarErrors):
self.events.add(EventName.radarFault)
elif not self.sm.all_alive_and_valid():
self.events.add(EventName.commIssue)
if not self.logged_comm_issue:
cloudlog.error(f"commIssue - valid: {self.sm.valid} - alive: {self.sm.alive}")
self.logged_comm_issue = True
else:
self.logged_comm_issue = False
if not self.sm['lateralPlan'].mpcSolutionValid and not (EventName.turningIndicatorOn in self.events.names):
self.events.add(EventName.plannerError)
if not self.sm['liveLocationKalman'].sensorsOK and not NOSENSOR:
if self.sm.frame > 5 / DT_CTRL: # Give locationd some time to receive all the inputs
self.events.add(EventName.sensorDataInvalid)
if not self.sm['liveLocationKalman'].posenetOK:
self.events.add(EventName.posenetInvalid)
if not self.sm['liveLocationKalman'].deviceStable:
self.events.add(EventName.deviceFalling)
if log.PandaState.FaultType.relayMalfunction in self.sm['pandaState'].faults:
self.events.add(EventName.relayMalfunction)
if self.sm['longitudinalPlan'].fcw:
self.events.add(EventName.fcw)
# TODO: fix simulator
if not SIMULATION:
#if not NOSENSOR:
#if not self.sm['liveLocationKalman'].gpsOK and (self.distance_traveled > 1000) and not TICI:
# Not show in first 1 km to allow for driving out of garage. This event shows after 5 minutes
#self.events.add(EventName.noGps)
if not self.sm.all_alive(['roadCameraState', 'driverCameraState']) and (self.sm.frame > 5 / DT_CTRL):
self.events.add(EventName.cameraMalfunction)
if self.sm['modelV2'].frameDropPerc > 20:
self.events.add(EventName.modeldLagging)
# Check if all manager processes are running
not_running = set(p.name for p in self.sm['managerState'].processes if not p.running)
if self.sm.rcv_frame['managerState'] and (not_running - IGNORE_PROCESSES):
self.events.add(EventName.processNotRunning)
# Only allow engagement with brake pressed when stopped behind another stopped car
#if CS.brakePressed and self.sm['longitudinalPlan'].vTargetFuture >= STARTING_TARGET_SPEED \
#and self.CP.openpilotLongitudinalControl and CS.vEgo < 0.3:
#self.events.add(EventName.noTarget)
def data_sample(self):
"""Receive data from sockets and update carState"""
# Update carState from CAN
can_strs = messaging.drain_sock_raw(self.can_sock, wait_for_one=True)
CS = self.CI.update(self.CC, can_strs)
self.sm.update(0)
# Check for CAN timeout
if not can_strs:
self.can_error_counter += 1
self.can_rcv_error = True
else:
self.can_rcv_error = False
# When the panda and controlsd do not agree on controls_allowed
# we want to disengage openpilot. However the status from the panda goes through
# another socket other than the CAN messages and one can arrive earlier than the other.
# Therefore we allow a mismatch for two samples, then we trigger the disengagement.
if not self.enabled:
self.mismatch_counter = 0
if not self.sm['pandaState'].controlsAllowed and self.enabled:
self.mismatch_counter += 1
self.distance_traveled += CS.vEgo * DT_CTRL
return CS
def state_transition(self, CS):
"""Compute conditional state transitions and execute actions on state transitions"""
self.v_cruise_kph_last = self.v_cruise_kph
# if stock cruise is completely disabled, then we can use our own set speed logic
self.CP.enableCruise = self.CI.CP.enableCruise
#if not self.CP.enableCruise:
# self.v_cruise_kph = update_v_cruise(self.v_cruise_kph, CS.buttonEvents, self.enabled, self.is_metric)
#elif self.CP.enableCruise and CS.cruiseState.enabled:
# self.v_cruise_kph = CS.cruiseState.speed * CV.MS_TO_KPH
# scc smoother
SccSmoother.update_cruise_buttons(self, CS, self.CP.openpilotLongitudinalControl)
# decrease the soft disable timer at every step, as it's reset on
# entrance in SOFT_DISABLING state
self.soft_disable_timer = max(0, self.soft_disable_timer - 1)
self.current_alert_types = [ET.PERMANENT]
# ENABLED, PRE ENABLING, SOFT DISABLING
if self.state != State.disabled:
# user and immediate disable always have priority in a non-disabled state
if self.events.any(ET.USER_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.USER_DISABLE)
elif self.events.any(ET.IMMEDIATE_DISABLE):
self.state = State.disabled
self.current_alert_types.append(ET.IMMEDIATE_DISABLE)
else:
# ENABLED
if self.state == State.enabled:
if self.events.any(ET.SOFT_DISABLE):
self.state = State.softDisabling
self.soft_disable_timer = 50 # 0.5s
self.current_alert_types.append(ET.SOFT_DISABLE)
# SOFT DISABLING
elif self.state == State.softDisabling:
if not self.events.any(ET.SOFT_DISABLE):
# no more soft disabling condition, so go back to ENABLED
self.state = State.enabled
elif self.events.any(ET.SOFT_DISABLE) and self.soft_disable_timer > 0:
self.current_alert_types.append(ET.SOFT_DISABLE)
elif self.soft_disable_timer <= 0:
self.state = State.disabled
# PRE ENABLING
elif self.state == State.preEnabled:
if not self.events.any(ET.PRE_ENABLE):
self.state = State.enabled
else:
self.current_alert_types.append(ET.PRE_ENABLE)
# DISABLED
elif self.state == State.disabled:
if self.events.any(ET.ENABLE):
if self.events.any(ET.NO_ENTRY):
self.current_alert_types.append(ET.NO_ENTRY)
else:
if self.events.any(ET.PRE_ENABLE):
self.state = State.preEnabled
else:
self.state = State.enabled
self.current_alert_types.append(ET.ENABLE)
self.v_cruise_kph = initialize_v_cruise(CS.vEgo, CS.buttonEvents, self.v_cruise_kph_last)
# Check if actuators are enabled
self.active = self.state == State.enabled or self.state == State.softDisabling
if self.active:
self.current_alert_types.append(ET.WARNING)
# Check if openpilot is engaged
self.enabled = self.active or self.state == State.preEnabled
def state_control(self, CS):
"""Given the state, this function returns an actuators packet"""
# Update VehicleModel
params = self.sm['liveParameters']
x = max(params.stiffnessFactor, 0.1)
#sr = max(params.steerRatio, 0.1)
if ntune_isEnabled('useLiveSteerRatio'):
sr = max(self.sm['liveParameters'].steerRatio, 0.1)
else:
if self.CP.carName in [CAR.GENESIS_G80]:
sr = interp(abs(self.angle_steers_des), [5., 15.], [13., 17.])
else:
sr = max(ntune_get('steerRatio'), 0.1)
self.VM.update_params(x, sr)
lat_plan = self.sm['lateralPlan']
long_plan = self.sm['longitudinalPlan']
actuators = car.CarControl.Actuators.new_message()
if CS.leftBlinker or CS.rightBlinker:
self.last_blinker_frame = self.sm.frame
# State specific actions
if not self.active:
self.LaC.reset()
self.LoC.reset(v_pid=CS.vEgo)
long_plan_age = DT_CTRL * (self.sm.frame - self.sm.rcv_frame['longitudinalPlan'])
# no greater than dt mpc + dt, to prevent too high extraps
dt = min(long_plan_age, LON_MPC_STEP + DT_CTRL) + DT_CTRL
a_acc_sol = long_plan.aStart + (dt / LON_MPC_STEP) * (long_plan.aTarget - long_plan.aStart)
v_acc_sol = long_plan.vStart + dt * (a_acc_sol + long_plan.aStart) / 2.0
# Gas/Brake PID loop
#actuators.gas, actuators.brake = self.LoC.update(self.active, CS, v_acc_sol, long_plan.vTargetFuture, a_acc_sol, self.CP)
# scc smoother
actuators.gas, actuators.brake = self.LoC.update(self.active and CS.cruiseState.speed > 1.,
CS,
v_acc_sol,
long_plan.vTargetFuture,
a_acc_sol,
self.CP,
self.sm['radarState'])
# Steering PID loop and lateral MPC
actuators.steer, actuators.steeringAngleDeg, lac_log = self.LaC.update(self.active, CS, self.CP, self.VM, params, lat_plan)
# Check for difference between desired angle and angle for angle based control
angle_control_saturated = self.CP.steerControlType == car.CarParams.SteerControlType.angle and \
abs(actuators.steeringAngleDeg - CS.steeringAngleDeg) > STEER_ANGLE_SATURATION_THRESHOLD
if angle_control_saturated and not CS.steeringPressed and self.active:
self.saturated_count += 1
else:
self.saturated_count = 0
# Send a "steering required alert" if saturation count has reached the limit
if (lac_log.saturated and not CS.steeringPressed) or \
(self.saturated_count > STEER_ANGLE_SATURATION_TIMEOUT):
if len(lat_plan.dPathPoints):
# Check if we deviated from the path
left_deviation = actuators.steer > 0 and lat_plan.dPathPoints[0] < -0.1
right_deviation = actuators.steer < 0 and lat_plan.dPathPoints[0] > 0.1
#if left_deviation or right_deviation:
# self.events.add(EventName.steerSaturated)
return actuators, v_acc_sol, a_acc_sol, lac_log
def publish_logs(self, CS, start_time, actuators, v_acc, a_acc, lac_log):
"""Send actuators and hud commands to the car, send controlsstate and MPC logging"""
CC = car.CarControl.new_message()
CC.enabled = self.enabled
CC.actuators = actuators
CC.cruiseControl.override = True
CC.cruiseControl.cancel = self.CP.enableCruise and not self.enabled and CS.cruiseState.enabled
# Some override values for Honda
# brake discount removes a sharp nonlinearity
brake_discount = (1.0 - clip(actuators.brake * 3., 0.0, 1.0))
speed_override = max(0.0, (self.LoC.v_pid + CS.cruiseState.speedOffset) * brake_discount)
CC.cruiseControl.speedOverride = float(speed_override if self.CP.enableCruise else 0.0)
CC.cruiseControl.accelOverride = self.CI.calc_accel_override(CS.aEgo, self.sm['longitudinalPlan'].aTarget, CS.vEgo, self.sm['longitudinalPlan'].vTarget)
CC.hudControl.setSpeed = float(self.v_cruise_kph * CV.KPH_TO_MS)
CC.hudControl.speedVisible = self.enabled
CC.hudControl.lanesVisible = self.enabled
CC.hudControl.leadVisible = self.sm['longitudinalPlan'].hasLead
right_lane_visible = self.sm['lateralPlan'].rProb > 0.5
left_lane_visible = self.sm['lateralPlan'].lProb > 0.5
CC.hudControl.rightLaneVisible = bool(right_lane_visible)
CC.hudControl.leftLaneVisible = bool(left_lane_visible)
recent_blinker = (self.sm.frame - self.last_blinker_frame) * DT_CTRL < 5.0 # 5s blinker cooldown
ldw_allowed = self.is_ldw_enabled and CS.vEgo > LDW_MIN_SPEED and not recent_blinker \
and not self.active and self.sm['liveCalibration'].calStatus == Calibration.CALIBRATED
meta = self.sm['modelV2'].meta
if len(meta.desirePrediction) and ldw_allowed:
l_lane_change_prob = meta.desirePrediction[Desire.laneChangeLeft - 1]
r_lane_change_prob = meta.desirePrediction[Desire.laneChangeRight - 1]
cameraOffset = ntune_get("cameraOffset")
l_lane_close = left_lane_visible and (self.sm['modelV2'].laneLines[1].y[0] > -(1.08 + cameraOffset))
r_lane_close = right_lane_visible and (self.sm['modelV2'].laneLines[2].y[0] < (1.08 - cameraOffset))
CC.hudControl.leftLaneDepart = bool(l_lane_change_prob > LANE_DEPARTURE_THRESHOLD and l_lane_close)
CC.hudControl.rightLaneDepart = bool(r_lane_change_prob > LANE_DEPARTURE_THRESHOLD and r_lane_close)
if CC.hudControl.rightLaneDepart or CC.hudControl.leftLaneDepart:
self.events.add(EventName.ldw)
clear_event = ET.WARNING if ET.WARNING not in self.current_alert_types else None
alerts = self.events.create_alerts(self.current_alert_types, [self.CP, self.sm, self.is_metric])
self.AM.add_many(self.sm.frame, alerts, self.enabled)
self.AM.process_alerts(self.sm.frame, clear_event)
CC.hudControl.visualAlert = self.AM.visual_alert
if not self.read_only:
# send car controls over can
can_sends = self.CI.apply(CC, self)
self.pm.send('sendcan', can_list_to_can_capnp(can_sends, msgtype='sendcan', valid=CS.canValid))
force_decel = (self.sm['driverMonitoringState'].awarenessStatus < 0.) or \
(self.state == State.softDisabling)
# Curvature & Steering angle
params = self.sm['liveParameters']
lat_plan = self.sm['lateralPlan']
steer_angle_without_offset = math.radians(CS.steeringAngleDeg - params.angleOffsetAverageDeg)
curvature = -self.VM.calc_curvature(steer_angle_without_offset, CS.vEgo)
self.angle_steers_des = math.degrees(self.VM.get_steer_from_curvature(-lat_plan.curvature, CS.vEgo))
self.angle_steers_des += params.angleOffsetDeg
# controlsState
dat = messaging.new_message('controlsState')
dat.valid = CS.canValid
controlsState = dat.controlsState
controlsState.alertText1 = self.AM.alert_text_1
controlsState.alertText2 = self.AM.alert_text_2
controlsState.alertSize = self.AM.alert_size
controlsState.alertStatus = self.AM.alert_status
controlsState.alertBlinkingRate = self.AM.alert_rate
controlsState.alertType = self.AM.alert_type
controlsState.alertSound = self.AM.audible_alert
controlsState.canMonoTimes = list(CS.canMonoTimes)
controlsState.longitudinalPlanMonoTime = self.sm.logMonoTime['longitudinalPlan']
controlsState.lateralPlanMonoTime = self.sm.logMonoTime['lateralPlan']
controlsState.enabled = self.enabled
controlsState.active = self.active
controlsState.curvature = curvature
controlsState.steeringAngleDesiredDeg = self.angle_steers_des
controlsState.state = self.state
controlsState.engageable = not self.events.any(ET.NO_ENTRY)
controlsState.longControlState = self.LoC.long_control_state
controlsState.vPid = float(self.LoC.v_pid)
controlsState.vCruise = float(self.cruiseVirtualMaxSpeed if self.CP.openpilotLongitudinalControl else self.v_cruise_kph)
controlsState.upAccelCmd = float(self.LoC.pid.p)
controlsState.uiAccelCmd = float(self.LoC.pid.i)
controlsState.ufAccelCmd = float(self.LoC.pid.f)
controlsState.vTargetLead = float(v_acc)
controlsState.aTarget = float(a_acc)
controlsState.cumLagMs = -self.rk.remaining * 1000.
controlsState.startMonoTime = int(start_time * 1e9)
controlsState.forceDecel = bool(force_decel)
controlsState.canErrorCounter = self.can_error_counter
controlsState.angleSteers = steer_angle_without_offset * CV.RAD_TO_DEG
controlsState.cluSpeedMs = self.clu_speed_ms
controlsState.applyAccel = self.apply_accel
controlsState.fusedAccel = self.fused_accel
controlsState.leadDist = self.lead_drel
controlsState.aReqValue = self.aReqValue
controlsState.aReqValueMin = self.aReqValueMin
controlsState.aReqValueMax = self.aReqValueMax
controlsState.steerRatio = self.VM.sR
controlsState.steerRateCost = ntune_get('steerRateCost')
controlsState.steerActuatorDelay = ntune_get('steerActuatorDelay')
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
controlsState.lateralControlState.angleState = lac_log
elif self.CP.lateralTuning.which() == 'pid':
controlsState.lateralControlState.pidState = lac_log
elif self.CP.lateralTuning.which() == 'lqr':
controlsState.lateralControlState.lqrState = lac_log
elif self.CP.lateralTuning.which() == 'indi':
controlsState.lateralControlState.indiState = lac_log
self.pm.send('controlsState', dat)
# carState
car_events = self.events.to_msg()
cs_send = messaging.new_message('carState')
cs_send.valid = CS.canValid
cs_send.carState = CS
cs_send.carState.events = car_events
self.pm.send('carState', cs_send)
# carEvents - logged every second or on change
if (self.sm.frame % int(1. / DT_CTRL) == 0) or (self.events.names != self.events_prev):
ce_send = messaging.new_message('carEvents', len(self.events))
ce_send.carEvents = car_events
self.pm.send('carEvents', ce_send)
self.events_prev = self.events.names.copy()
# carParams - logged every 50 seconds (> 1 per segment)
if (self.sm.frame % int(50. / DT_CTRL) == 0):
cp_send = messaging.new_message('carParams')
cp_send.carParams = self.CP
self.pm.send('carParams', cp_send)
# carControl
cc_send = messaging.new_message('carControl')
cc_send.valid = CS.canValid
cc_send.carControl = CC
self.pm.send('carControl', cc_send)
# copy CarControl to pass to CarInterface on the next iteration
self.CC = CC
def step(self):
start_time = sec_since_boot()
self.prof.checkpoint("Ratekeeper", ignore=True)
# Sample data from sockets and get a carState
CS = self.data_sample()
self.prof.checkpoint("Sample")
self.update_events(CS)
if not self.read_only:
# Update control state
self.state_transition(CS)
self.prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_acc, a_acc, lac_log = self.state_control(CS)
self.prof.checkpoint("State Control")
# Publish data
self.publish_logs(CS, start_time, actuators, v_acc, a_acc, lac_log)
self.prof.checkpoint("Sent")
def controlsd_thread(self):
while True:
self.step()
self.rk.monitor_time()
self.prof.display()