def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking(
"Offroad_ConnectivityNeeded",
json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(
OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt",
json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get(
"CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (
not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking(
"Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 100
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
charging_disabled = False
current_update_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
ts_last_ip = 0
ip_addr = '255.255.255.255'
# sound trigger
sound_trigger = 1
opkrAutoShutdown = 0
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = Params().get('OpkrEnableGetoffAlert') == b'1'
params = Params()
if int(params.get('OpkrAutoShutdown')) == 0:
opkrAutoShutdown = 0
elif int(params.get('OpkrAutoShutdown')) == 1:
opkrAutoShutdown = 5
elif int(params.get('OpkrAutoShutdown')) == 2:
opkrAutoShutdown = 30
elif int(params.get('OpkrAutoShutdown')) == 3:
opkrAutoShutdown = 60
elif int(params.get('OpkrAutoShutdown')) == 4:
opkrAutoShutdown = 180
elif int(params.get('OpkrAutoShutdown')) == 5:
opkrAutoShutdown = 300
elif int(params.get('OpkrAutoShutdown')) == 6:
opkrAutoShutdown = 600
elif int(params.get('OpkrAutoShutdown')) == 7:
opkrAutoShutdown = 1800
elif int(params.get('OpkrAutoShutdown')) == 8:
opkrAutoShutdown = 3600
elif int(params.get('OpkrAutoShutdown')) == 9:
opkrAutoShutdown = 10800
else:
opkrAutoShutdown = 18000
while 1:
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [log.HealthData.HwType.blackPanda, log.HealthData.HwType.uno, log.HealthData.HwType.dos]
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int( params.get("IsOpenpilotViewEnabled") )
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
# update ip every 10 seconds
ts = sec_since_boot()
if ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0,
msg.thermal.cpu1,
msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay and (started_ts is None) and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
set_offroad_alert("Offroad_InvalidTime", False)
if not time_valid and time_valid_prev:
set_offroad_alert("Offroad_InvalidTime", True)
time_valid_prev = time_valid
# Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# last_update_exception = params.get("LastUpdateException", encoding='utf8')
# if update_failed_count > 15 and last_update_exception is not None:
# if current_branch in ["release2", "dashcam"]:
# extra_text = "Ensure the software is correctly installed"
# else:
# extra_text = last_update_exception
# if current_update_alert != "update" + extra_text:
# current_update_alert = "update" + extra_text
# set_offroad_alert("Offroad_ConnectivityNeeded", False)
# set_offroad_alert("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert("Offroad_UpdateFailed", True, extra_text=extra_text)
# elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# if current_update_alert != "expired":
# current_update_alert = "expired"
# set_offroad_alert("Offroad_UpdateFailed", False)
# set_offroad_alert("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert("Offroad_ConnectivityNeeded", True)
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# if current_update_alert != "prompt" + remaining_time:
# current_update_alert = "prompt" + remaining_time
# set_offroad_alert("Offroad_UpdateFailed", False)
# set_offroad_alert("Offroad_ConnectivityNeeded", False)
# set_offroad_alert("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
# elif current_update_alert is not None:
# current_update_alert = None
# set_offroad_alert("Offroad_UpdateFailed", False)
# set_offroad_alert("Offroad_ConnectivityNeeded", False)
# set_offroad_alert("Offroad_ConnectivityNeededPrompt", False)
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (not do_uninstall)
# check for firmware mismatch
#should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
set_offroad_alert("Offroad_PandaFirmwareMismatch", False)
if not fw_version_match and fw_version_match_prev:
set_offroad_alert("Offroad_PandaFirmwareMismatch", True)
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
set_offroad_alert("Offroad_TemperatureTooHigh", True)
else:
if thermal_status_prev >= ThermalStatus.danger:
set_offroad_alert("Offroad_TemperatureTooHigh", False)
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
if sound_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and started_seen and (sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([mediaplayer + 'mediaplayer', '/data/openpilot/selfdrive/assets/sounds/eondetach.wav'], shell = False, stdin=None, stdout=None, stderr=None, env = env, close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent <= BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and opkrAutoShutdown and (sec_since_boot() - off_ts) > opkrAutoShutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg)
if msg.thermal.batteryCurrent > 0:
msg.thermal.batteryStatus = "Discharging"
else:
msg.thermal.batteryStatus = "Charging"
msg.thermal.chargingDisabled = charging_disabled
prebuiltlet = Params().get('PutPrebuiltOn') == b'1'
if not os.path.isfile(prebuiltfile) and prebuiltlet:
os.system("cd /data/openpilot; touch prebuilt")
elif os.path.isfile(prebuiltfile) and not prebuiltlet:
os.system("cd /data/openpilot; rm -f prebuilt")
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
set_offroad_alert("Offroad_ChargeDisabled", True)
elif usb_power and not usb_power_prev:
set_offroad_alert("Offroad_ChargeDisabled", False)
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
print(msg)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
charging_disabled = False
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [
log.HealthData.HwType.blackPanda,
log.HealthData.HwType.uno, log.HealthData.HwType.dos
]
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem,
max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed,
startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay
and is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = now.year >= 2019
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["not_uninstalling"] = not params.get(
"DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
completed_training = params.get(
"CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = completed_training or (
current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get(
"IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get(
"IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
charging_disabled = check_car_battery_voltage(should_start, health,
charging_disabled, msg)
if msg.thermal.batteryCurrent > 0:
msg.thermal.batteryStatus = "Discharging"
else:
msg.thermal.batteryStatus = "Charging"
msg.thermal.chargingDisabled = charging_disabled
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.carBatteryCapacity = max(0, pm.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.thermal.chargingDisabled = pm.should_disable_charging(
health, off_ts)
# Check if we need to shut down
if pm.should_shutdown(health, off_ts, started_seen, LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
print(msg)
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
is_uno = (read_tz(29, clip=False) < -1000)
if is_uno or not ANDROID:
handle_fan = handle_fan_uno
else:
setup_eon_fan()
handle_fan = handle_fan_eon
pm = PowerMonitoring(is_uno)
# dragonpilot
ts_last_ip = None
ts_last_update_vars = 0
ts_last_charging_ctrl = None
dp_last_modified = None
ip_addr = '255.255.255.255'
dragon_charging_ctrl = False
dragon_charging_ctrl_prev = False
dragon_to_discharge = 70
dragon_to_charge = 60
dp_temp_monitor = True
while 1:
# dragonpilot
ts = sec_since_boot()
# update variable status every 10 secs
if ts - ts_last_update_vars >= 10.:
modified = dp_get_last_modified()
if dp_last_modified != modified:
dp_temp_monitor = True if params.get('DragonEnableTempMonitor', encoding='utf8') == "1" else False
if not is_uno:
dragon_charging_ctrl = True if params.get('DragonChargingCtrl', encoding='utf8') == "1" else False
if dragon_charging_ctrl:
try:
dragon_to_discharge = int(params.get('DragonCharging', encoding='utf8'))
except (TypeError, ValueError):
dragon_to_discharge = 70
try:
dragon_to_charge = int(params.get('DragonDisCharging', encoding='utf8'))
except (TypeError, ValueError):
dragon_to_charge = 60
else:
dragon_charging_ctrl = False
dp_last_modified = modified
ts_last_update_vars = ts
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
# clear car params when panda gets disconnected
if health is None and health_prev is not None:
params.panda_disconnect()
health_prev = health
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
# dragonpilot ip Mod
# update ip every 10 seconds
ts = sec_since_boot()
if ts_last_ip is None or ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1,
msg.thermal.cpu2, msg.thermal.cpu3) / 10.0
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 86.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 78.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
# now = datetime.datetime.now()
#
# # show invalid date/time alert
# time_valid = now.year >= 2019
# if time_valid and not time_valid_prev:
# params.delete("Offroad_InvalidTime")
# if not time_valid and time_valid_prev:
# params.put("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
# time_valid_prev = time_valid
time_valid = True
# Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
#
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
#
# if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# if current_connectivity_alert != "expired":
# current_connectivity_alert = "expired"
# params.delete("Offroad_ConnectivityNeededPrompt")
# params.put("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# if current_connectivity_alert != "prompt" + remaining_time:
# current_connectivity_alert = "prompt" + remaining_time
# alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
# alert_connectivity_prompt["text"] += remaining_time + " days."
# params.delete("Offroad_ConnectivityNeeded")
# params.put("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
# elif current_connectivity_alert is not None:
# current_connectivity_alert = None
# params.delete("Offroad_ConnectivityNeeded")
# params.delete("Offroad_ConnectivityNeededPrompt")
# start constellation of processes when the car starts
ignition = health is not None and (health.health.ignitionLine or health.health.ignitionCan)
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
params.put("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if dp_temp_monitor:
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
params.put("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
params.put("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if dragon_charging_ctrl != dragon_charging_ctrl_prev:
set_battery_charging(True)
if dragon_charging_ctrl:
if ts_last_charging_ctrl is None or ts - ts_last_charging_ctrl >= 60.:
if msg.thermal.batteryPercent >= dragon_to_discharge and get_battery_charging():
set_battery_charging(False)
elif msg.thermal.batteryPercent <= dragon_to_charge and not get_battery_charging():
set_battery_charging(True)
ts_last_charging_ctrl = ts
dragon_charging_ctrl_prev = dragon_charging_ctrl
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
