def thermald_thread():
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
while 1:
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem,
max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed,
startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
EnableLogger = int(params.get("RecordFront"))
if not EnableLogger:
pass
elif update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["not_uninstalling"] = not params.get(
"DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get(
"IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get(
"IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
should_start = all(startup_conditions.values())
startup_conditions[
"hardware_supported"] = health is not None and health.health.hwType not in [
log.HealthData.HwType.whitePanda,
log.HealthData.HwType.greyPanda
]
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported", health is not None
and not startup_conditions["hardware_supported"])
is_rhd_region = int(Params().get("IsRHD"))
if is_rhd_region:
should_start = True # 영상보기
else:
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.carBatteryCapacity = max(0, pm.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.thermal.chargingDisabled = pm.should_disable_charging(
health, off_ts)
# Check if we need to shut down
if pm.should_shutdown(health, off_ts, started_seen, LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
if usb_power:
pm.charging_ctrl(msg, ts, 60, 40)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 100 #10 if LEON else 3
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
do_uninstall = 0
accepted_terms = 0
completed_training = 0
panda_signature = 0
ts_last_ip = 0
ip_addr = '255.255.255.255'
# sound trigger
sound_trigger = 1
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = Params().get('OpkrEnableGetoffAlert') == b'1'
OpkrAutoShutdown = params.get_OpkrAutoShutdown()
while 1:
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [log.HealthData.HwType.blackPanda, log.HealthData.HwType.uno, log.HealthData.HwType.dos]
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int( params.get("IsOpenpilotViewEnabled") )
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
# update ip every 10 seconds
ts = sec_since_boot()
if ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0,
msg.thermal.cpu1,
msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay and (started_ts is None) and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
"""
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
"""
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
if sound_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and started_seen and (sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([mediaplayer + 'mediaplayer', '/data/openpilot/selfdrive/assets/sounds/eondetach.wav'], shell = False, stdin=None, stdout=None, stderr=None, env = env, close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent <= BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and OpkrAutoShutdown and (sec_since_boot() - off_ts) > OpkrAutoShutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
prebuiltlet = Params().get('PutPrebuiltOn') == b'1'
if not os.path.isfile(prebuiltfile) and prebuiltlet:
os.system("cd /data/openpilot; touch prebuilt")
elif os.path.isfile(prebuiltfile) and not prebuiltlet:
os.system("cd /data/openpilot; rm -f prebuilt")
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if usb_power:
pm.charging_ctrl( msg, ts, 80, 70 )
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaState', timeout=pandaState_timeout)
location_sock = messaging.sub_sock('gpsLocationExternal')
managerState_sock = messaging.sub_sock('managerState', conflate=True)
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
wifiIpAddress = "N/A"
wifi_ssid = "---"
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
ui_running_prev = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
if params.get_bool("IsOnroad"):
cloudlog.event("onroad flag not cleared")
# CPR3 logging
if EON:
base_path = "/sys/kernel/debug/cpr3-regulator/"
cpr_files = [p for p in Path(base_path).glob("**/*") if p.is_file()]
cpr_files = ["/sys/kernel/debug/regulator/pm8994_s11/voltage"] + cpr_files
cpr_data = {}
for cf in cpr_files:
with open(cf, "r") as f:
try:
cpr_data[str(cf)] = f.read().strip()
except Exception:
pass
cloudlog.event("CPR", data=cpr_data)
# sound trigger
sound_trigger = 1
opkrAutoShutdown = 0
shutdown_trigger = 1
is_openpilot_view_enabled = 0
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = params.get_bool("OpkrEnableGetoffAlert")
hotspot_on_boot = params.get_bool("OpkrHotspotOnBoot")
hotspot_run = False
if int(params.get("OpkrAutoShutdown", encoding="utf8")) == 0:
opkrAutoShutdown = 0
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 1:
opkrAutoShutdown = 5
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 2:
opkrAutoShutdown = 30
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 3:
opkrAutoShutdown = 60
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 4:
opkrAutoShutdown = 180
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 5:
opkrAutoShutdown = 300
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 6:
opkrAutoShutdown = 600
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 7:
opkrAutoShutdown = 1800
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 8:
opkrAutoShutdown = 3600
elif int(params.get("OpkrAutoShutdown", encoding="utf8")) == 9:
opkrAutoShutdown = 10800
else:
opkrAutoShutdown = 18000
battery_charging_control = params.get_bool("OpkrBatteryChargingControl")
battery_charging_min = int(params.get("OpkrBatteryChargingMin", encoding="utf8"))
battery_charging_max = int(params.get("OpkrBatteryChargingMax", encoding="utf8"))
is_openpilot_dir = True
while 1:
ts = sec_since_boot()
pandaState = messaging.recv_sock(pandaState_sock, wait=True)
msg = read_thermal(thermal_config)
if pandaState is not None:
usb_power = pandaState.pandaState.usbPowerMode != log.PandaState.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
shutdown_trigger = 1
else:
no_panda_cnt = 0
startup_conditions["ignition"] = pandaState.pandaState.ignitionLine or pandaState.pandaState.ignitionCan
sound_trigger == 1
#startup_conditions["hardware_supported"] = pandaState.pandaState.pandaType not in [log.PandaState.PandaType.whitePanda,
# log.PandaState.PandaType.greyPanda]
#set_offroad_alert_if_changed("Offroad_HardwareUnsupported", not startup_conditions["hardware_supported"])
# Setup fan handler on first connect to panda
if handle_fan is None and pandaState.pandaState.pandaType != log.PandaState.PandaType.unknown:
is_uno = pandaState.pandaState.pandaType == log.PandaState.PandaType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaState.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
elif params.get_bool("IsOpenpilotViewEnabled") and not params.get_bool("IsDriverViewEnabled") and is_openpilot_view_enabled == 0:
is_openpilot_view_enabled = 1
startup_conditions["ignition"] = True
elif not params.get_bool("IsOpenpilotViewEnabled") and not params.get_bool("IsDriverViewEnabled") and is_openpilot_view_enabled == 1:
shutdown_trigger = 0
sound_trigger == 0
is_openpilot_view_enabled = 0
startup_conditions["ignition"] = False
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength, wifi_ssid = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(f"Modem stuck in registered state {network_info}. nmcli conn up lte")
os.system("nmcli conn up lte")
registered_count = 0
wifiIpAddress = HARDWARE.get_ip_address()
try:
ping_test = subprocess.check_output(["ping", "-c", "1", "-W", "1", "google.com"])
Params().put("LastAthenaPingTime", str(int(sec_since_boot() * 1e9))) if ping_test else False
except Exception:
Params().delete("LastAthenaPingTime")
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = int(round(psutil.cpu_percent()))
msg.deviceState.gpuUsagePercent = int(round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
msg.deviceState.wifiSSID = wifi_ssid
if network_info is not None:
msg.deviceState.networkInfo = network_info
msg.deviceState.wifiIpAddress = wifiIpAddress
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryStatus = HARDWARE.get_battery_status()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.batteryVoltage = HARDWARE.get_battery_voltage()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.deviceState.batteryPercent = 100
msg.deviceState.batteryStatus = "Charging"
msg.deviceState.batteryTempC = 0
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.deviceState.cpuTempC))
max_comp_temp = max(max_cpu_temp, msg.deviceState.memoryTempC, max(msg.deviceState.gpuTempC))
bat_temp = msg.deviceState.batteryTempC
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
thermal_status = ThermalStatus.green # default to good condition
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = True if ((now.year > 2020) or (now.year == 2020 and now.month >= 10)) else True # set True for battery less EON otherwise, set False.
set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
# Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# last_update_exception = params.get("LastUpdateException", encoding='utf8')
# if update_failed_count > 15 and last_update_exception is not None:
# if current_branch in ["release2", "dashcam"]:
# extra_text = "Ensure the software is correctly installed"
# else:
# extra_text = last_update_exception
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
# elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
# else:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
#startup_conditions["up_to_date"] = params.get("Offroad_ConnectivityNeeded") is None or params.get_bool("DisableUpdates")
startup_conditions["not_uninstalling"] = not params.get_bool("DoUninstall")
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed("Offroad_PandaFirmwareMismatch", (not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool("IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool("IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not startup_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_NvmeMissing", (not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
if shutdown_trigger == 1 and sound_trigger == 1 and msg.deviceState.batteryStatus == "Discharging" and started_seen and (sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([mediaplayer + 'mediaplayer', '/data/openpilot/selfdrive/assets/sounds/eondetach.wav'], shell = False, stdin=None, stdout=None, stderr=None, env = env, close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if shutdown_trigger == 1 and msg.deviceState.batteryStatus == "Discharging" and \
started_seen and opkrAutoShutdown and (sec_since_boot() - off_ts) > opkrAutoShutdown and not os.path.isfile(pandaflash_ongoing):
os.system('LD_LIBRARY_PATH="" svc power shutdown')
if (count % int(1. / DT_TRML)) == 0:
if int(params.get("OpkrForceShutdown", encoding="utf8")) != 0 and not started_seen and msg.deviceState.batteryStatus == "Discharging":
shutdown_option = int(params.get("OpkrForceShutdown", encoding="utf8"))
if shutdown_option == 1:
opkrForceShutdown = 60
elif shutdown_option == 2:
opkrForceShutdown = 180
elif shutdown_option == 3:
opkrForceShutdown = 300
elif shutdown_option == 4:
opkrForceShutdown = 600
else:
opkrForceShutdown = 1800
if (sec_since_boot() - off_ts) > opkrForceShutdown and params.get_bool("OpkrForceShutdownTrigger"):
os.system('LD_LIBRARY_PATH="" svc power shutdown')
elif not params.get_bool("OpkrForceShutdownTrigger"):
off_ts = sec_since_boot()
# opkr
prebuiltlet = params.get_bool("PutPrebuiltOn")
if not os.path.isdir("/data/openpilot"):
if is_openpilot_dir:
os.system("cd /data/params/d; rm -f DongleId") # Delete DongleID if the Openpilot directory disappears, Seems you want to switch fork/branch.
is_openpilot_dir = False
elif not os.path.isfile(prebuiltfile) and prebuiltlet and is_openpilot_dir:
os.system("cd /data/openpilot; touch prebuilt")
elif os.path.isfile(prebuiltfile) and not prebuiltlet:
os.system("cd /data/openpilot; rm -f prebuilt")
# opkr
sshkeylet = params.get_bool("OpkrSSHLegacy")
if not os.path.isfile(sshkeyfile) and sshkeylet:
os.system("cp -f /data/openpilot/selfdrive/assets/addon/key/GithubSshKeys_legacy /data/params/d/GithubSshKeys; chmod 600 /data/params/d/GithubSshKeys; touch /data/public_key")
elif os.path.isfile(sshkeyfile) and not sshkeylet:
os.system("cp -f /data/openpilot/selfdrive/assets/addon/key/GithubSshKeys_new /data/params/d/GithubSshKeys; chmod 600 /data/params/d/GithubSshKeys; rm -f /data/public_key")
# opkr hotspot
if hotspot_on_boot and not hotspot_run and sec_since_boot() > 80:
os.system("service call wifi 37 i32 0 i32 1 &")
hotspot_run = True
# Offroad power monitoring
power_monitor.calculate(pandaState)
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(0, power_monitor.get_car_battery_capacity())
# # Check if we need to disable charging (handled by boardd)
# msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(pandaState, off_ts)
#
# # Check if we need to shut down
# if power_monitor.should_shutdown(pandaState, off_ts, started_seen):
# cloudlog.info(f"shutting device down, offroad since {off_ts}")
# # TODO: add function for blocking cloudlog instead of sleep
# time.sleep(10)
# HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
manager_state = messaging.recv_one_or_none(managerState_sock)
if manager_state is not None:
ui_running = "ui" in (p.name for p in manager_state.managerState.processes if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9*(started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# atom
if usb_power and battery_charging_control:
power_monitor.charging_ctrl( msg, ts, battery_charging_max, battery_charging_min )
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
cloudlog.event("High offroad memory usage", mem=msg.deviceState.memoryUsagePercent)
location = messaging.recv_sock(location_sock)
cloudlog.event("STATUS_PACKET",
count=count,
pandaState=(strip_deprecated_keys(pandaState.to_dict()) if pandaState else None),
location=(strip_deprecated_keys(location.gpsLocationExternal.to_dict()) if location else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 90 #10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
OpkrLoadStep = 0
OpkrAutoShutdown = 0
do_uninstall = 0
accepted_terms = 0
completed_training = 0
panda_signature = 0
while 1:
OpkrLoadStep += 1
if OpkrLoadStep == 1:
OpkrAutoShutdown = params.get_OpkrAutoShutdown()
elif OpkrLoadStep == 2:
do_uninstall = params.get("DoUninstall") == b"1"
elif OpkrLoadStep == 3:
accepted_terms = params.get("HasAcceptedTerms") == terms_version
elif OpkrLoadStep == 4:
completed_training = params.get(
"CompletedTrainingVersion") == training_version
elif OpkrLoadStep == 5:
panda_signature = params.get("PandaFirmware")
else:
OpkrLoadStep = 0
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int(params.get("IsOpenpilotViewEnabled"))
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
"""
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
"""
#accepted_terms = params.get("HasAcceptedTerms") == terms_version
#completed_training = params.get("CompletedTrainingVersion") == training_version
#panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
#ignition = True # 영상보기.
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (
not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
current_ts = sec_since_boot()
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = current_ts
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = current_ts
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
power_shutdown = False
if msg.thermal.batteryStatus == "Discharging":
delta_ts = current_ts - off_ts
if started_seen:
if msg.thermal.batteryPercent <= BATT_PERC_OFF and (
OpkrAutoShutdown and delta_ts > OpkrAutoShutdown):
power_shutdown = True
elif delta_ts > 240 and msg.thermal.batteryPercent < 10:
power_shutdown = True
if power_shutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
print('power_shutdown batterypercent={} should_start={}'.
format(msg.thermal.batteryPercent, should_start))
else:
off_ts = current_ts
#print( 'OpkrAutoShutdown = {}'.format( OpkrAutoShutdown ) )
#if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
# started_seen and (current_ts - off_ts) > 60:
# os.system('LD_LIBRARY_PATH="" svc power shutdown')
# print( 'batterypercent={} should_start={}'.format(msg.thermal.batteryPercent, should_start) )
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking(
"Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if usb_power:
pm.charging_ctrl(msg, ts, 60, 40)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
