Python readline示例

示例#1

logFile = open(logFileName, "w+")
logFile.write("=======================================================\n")
logFile.write("                Packet Error Rate Test                 \n")
logFile.write("-------------------------------------------------------\n")
logFile.write("Channel: " + str(DEFAULT_CHANNEL) + "\n")

# Set serial read time-out
serialport.setTimeout(SERIAL_PORT_TIMEOUT_ROUTER)

# Factory new the controller
print '[Factory New]'
isFN = 0
serialport.sendBuffer('ATZ\r\n')
while (isFN == 0):
    fnResponse = serialport.readline()
    if fnResponse.startswith('$READY'):
        isFN = 1
    time.sleep(1)
print '[Done]'

# Create network
sendCommand(serialport, createNwkCmd, channel=DEFAULT_CHANNEL)
time.sleep(1)

# Enable join
sendCommand(serialport, joinEnableCmd, time=PERMIT_JOIN_DURATION)
isJoinEnabled = 1
print '[Permit join enabled]'

# Start time

示例#2

文件： debug.py 项目： myw2s/PythonScript

logFile = open(logFileName, "w+")
logFile.write("=======================================================\n")
logFile.write("                Packet Error Rate Test                 \n")
logFile.write("-------------------------------------------------------\n")
logFile.write("Channel: " + str(DEFAULT_CHANNEL) + "\n")

# Set serial read time-out
serialport.setTimeout(SERIAL_PORT_TIMEOUT_ROUTER)

# Factory new the controller
print '[Factory New]'
isFN = 0
serialport.sendBuffer('ATZ\r\n')
while(isFN == 0):
	fnResponse = serialport.readline()
	if fnResponse.startswith('$READY'):
		isFN = 1
	time.sleep(1)
print '[Done]'

# Create network
sendCommand(serialport, createNwkCmd, channel=DEFAULT_CHANNEL)
time.sleep(1)

# Enable join
sendCommand(serialport, joinEnableCmd, time=PERMIT_JOIN_DURATION)
isJoinEnabled = 1
print '[Permit join enabled]'

# Start time

示例#3

文件： testCase.py 项目： myw2s/Python-scripts

def runTest(self, event):
	# Log file directory
	if not os.path.exists("log"):
	   os.makedirs("log")
	os.chdir("log")

	# Log file name
	logFileName = "log_" + datetime.now().strftime("%Y%m%d_%H%M%S") + ".txt"
	if os.path.exists(logFileName):
	   os.remove(logFileName)

	logFile = open(logFileName, "w+")
	logFile.write("=======================================================\n")
	logFile.write("                      UART Rx Test                     \n")
	logFile.write("-------------------------------------------------------\n")

	# Serial port time-out
	serialport.setTimeout(SERIAL_TIMEOUT)

	# Factory new the controller
	print '[Factory New]'
	isFN = 0
	while(isFN == 0):
		serialport.sendBuffer('ATZ\r\n')
		fnResponse = serialport.readline()
		if fnResponse.startswith('$READY'):
			isFN = 1
		time.sleep(1)
	print '[Done]'

	packetId = 0
	lastErrorPacketId = 0

	errorCounts = 0

	atCommand='ATI2\r\n'

	for packetId in range(0, 1000):
		serialport.sendBuffer(atCommand)
		logFile.write(atCommand)

		# Log the echo from the controller
		echo = serialport.readline()
		print echo
		logFile.write(echo)

		response = serialport.readline()
		responseOK = serialport.readline()
		logMessage = '[' + str(packetId) + '] ' + response + responseOK
		print logMessage
		logFile.write(logMessage)

		if (response.startswith('ERROR')):
			errorCounts += 1
			logMessage = '[Error occurs after ' + str(packetId - lastErrorPacketId) + ' packets]\n'
			print logMessage
			lastErrorPacketId = packetId
			logFile.write(logMessage)

	# Print the test result
	print 'Tried: ' + str(packetId + 1) + '\n'
	print 'Error Counts: ' + str(errorCounts) + '\n'
	logFile.write('Tried: ' + str(packetId + 1) + '\n')
	logFile.write('Error Counts: ' + str(errorCounts) + '\n')
	logFile.close()
	return

示例#4

文件： getDeviceInfo.py 项目： myw2s/PythonScript

os.chdir("log")
if os.path.exists("deviceInfo.txt"):
    os.remove("deviceInfo.txt")

logFile = open("deviceInfo.txt", "w+")
logFile.write("=======================================================\n")
logFile.write("[Log created]\n" + datetime.now().strftime("%d %b %Y %H:%M:%S") + "\n")

# Join started
isStarted = 1
isJoined = 0
while isStarted:
    duration = elapsedTime(start) / 1000
    if (isJoined == 0) and (duration >= PERMIT_JOIN_DURATION):
        isStarted = 0
    resp = serialport.readline()
    print resp
    if resp:
        # Wait for device join
        if resp.startswith("$NEWDEVU:"):
            s, info = resp.split(":")
            nwkAddr, macAddr = info.split(",")
            acepResp = sendCommandNoResponsePattern(serialport, activeEndpointCmd, shortAddr=int(nwkAddr, base=16))

            # Request to leave
            isJoined = 1

            # Disable join
            sendCommand(serialport, joinEnableCmd, time=PERMIT_JOIN_STOP)
            print "[Permit join disabled]"

示例#5

文件： UartRxTest.py 项目： myw2s/PythonScript

logFile = open(logFileName, "w+")
logFile.write("=======================================================\n")
logFile.write("                      UART Rx Test                     \n")
logFile.write("-------------------------------------------------------\n")
#print '[UART RX Test]'

# Serial port timeout
serialport.setTimeout(SERIAL_TIMEOUT)

# Factory new the controller
print '[Factory New]'
isFN = 0
while (isFN == 0):
    serialport.sendBuffer('ATZ\r\n')
    fnResponse = serialport.readline()
    if fnResponse.startswith('$READY'):
        isFN = 1
    time.sleep(1)
print '[Done]'

#Create network
#sendCommand(serialport, createNwkCmd, channel=0x1A)
#time.sleep(1)

# Enable join
#sendCommand(serialport, joinEnableCmd, time=0xFF)
#isJoinEnabled = 1
#print '[Permit join enabled]'

packetId = 0

示例#6

文件： UartRxTest.py 项目： myw2s/PythonScript

logFile = open(logFileName, "w+")
logFile.write("=======================================================\n")
logFile.write("                      UART Rx Test                     \n")
logFile.write("-------------------------------------------------------\n")
#print '[UART RX Test]'

# Serial port timeout
serialport.setTimeout(SERIAL_TIMEOUT)

# Factory new the controller
print '[Factory New]'
isFN = 0
while(isFN == 0):
	serialport.sendBuffer('ATZ\r\n')
	fnResponse = serialport.readline()
	if fnResponse.startswith('$READY'):
		isFN = 1
	time.sleep(1)
print '[Done]'

#Create network
#sendCommand(serialport, createNwkCmd, channel=0x1A)
#time.sleep(1)

# Enable join
#sendCommand(serialport, joinEnableCmd, time=0xFF)
#isJoinEnabled = 1
#print '[Permit join enabled]'

packetId = 0

示例#7

文件： getDeviceInfo.py 项目： myw2s/PythonScript

if os.path.exists("deviceInfo.txt"):
    os.remove("deviceInfo.txt")

logFile = open("deviceInfo.txt", "w+")
logFile.write("=======================================================\n")
logFile.write("[Log created]\n" +
              datetime.now().strftime("%d %b %Y %H:%M:%S") + "\n")

#Join started
isStarted = 1
isJoined = 0
while (isStarted):
    duration = elapsedTime(start) / 1000
    if (isJoined == 0) and (duration >= PERMIT_JOIN_DURATION):
        isStarted = 0
    resp = serialport.readline()
    print resp
    if resp:
        # Wait for device join
        if resp.startswith('$NEWDEVU:'):
            s, info = resp.split(':')
            nwkAddr, macAddr = info.split(',')
            acepResp = sendCommandNoResponsePattern(serialport,
                                                    activeEndpointCmd,
                                                    shortAddr=int(nwkAddr,
                                                                  base=16))

            # Request to leave
            isJoined = 1

            #Disable join

示例#8

文件： testCase.py 项目： myw2s/PythonScript

def runTest(self, event):
    # Log file directory
    if not os.path.exists("log"):
        os.makedirs("log")
    os.chdir("log")

    # Log file name
    logFileName = "log_" + datetime.now().strftime("%Y%m%d_%H%M%S") + ".txt"
    if os.path.exists(logFileName):
        os.remove(logFileName)

    logFile = open(logFileName, "w+")
    logFile.write("=======================================================\n")
    logFile.write("                      UART Rx Test                     \n")
    logFile.write("-------------------------------------------------------\n")

    # Serial port time-out
    serialport.setTimeout(SERIAL_TIMEOUT)

    # Factory new the controller
    print '[Factory New]'
    isFN = 0
    while (isFN == 0):
        serialport.sendBuffer('ATZ\r\n')
        fnResponse = serialport.readline()
        if fnResponse.startswith('$READY'):
            isFN = 1
        time.sleep(1)
    print '[Done]'

    packetId = 0
    lastErrorPacketId = 0

    errorCounts = 0

    atCommand = 'ATI2\r\n'

    for packetId in range(0, 1000):
        serialport.sendBuffer(atCommand)
        logFile.write(atCommand)

        # Log the echo from the controller
        echo = serialport.readline()
        print echo
        logFile.write(echo)

        response = serialport.readline()
        responseOK = serialport.readline()
        logMessage = '[' + str(packetId) + '] ' + response + responseOK
        print logMessage
        logFile.write(logMessage)

        if (response.startswith('ERROR')):
            errorCounts += 1
            logMessage = '[Error occurs after ' + str(
                packetId - lastErrorPacketId) + ' packets]\n'
            print logMessage
            lastErrorPacketId = packetId
            logFile.write(logMessage)

    # Print the test result
    print 'Tried: ' + str(packetId + 1) + '\n'
    print 'Error Counts: ' + str(errorCounts) + '\n'
    logFile.write('Tried: ' + str(packetId + 1) + '\n')
    logFile.write('Error Counts: ' + str(errorCounts) + '\n')
    logFile.close()
    return