def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
for ii, d in enumerate(self.t1_pts):
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
delay = d
w=self.pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100 - delay ,
6*gauss_sigma + 200)
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
print len(wtpts)
print len(ftpts)
for ii, d in enumerate(self.mm_flux_sideband_pts):
self.delay = d
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
pulse_delay = self.delay + 2* self.flux_pi_length + 100
self.markers['ch3m1'][ii] = ap2.square(mtpts, 1,self.origin - pulse_delay - self.tek2_delay_time,
100)
w=self.pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - pulse_delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - pulse_delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - pulse_delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100 - pulse_delay ,
6*gauss_sigma + 200)
flux_a = self.flux_a
flux_freq = self.flux_freq
flux_pi_length = self.flux_pi_length
if True:
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.square(ftpts, flux_a, 15 , flux_pi_length,5), np.zeros(len(ftpts)),
flux_freq, self.phase)[0]
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(ftpts,
ap2.square(ftpts, flux_a, 3*15+flux_pi_length +self.delay , flux_pi_length,5), np.zeros(len(ftpts)),
flux_freq, self.phase)[0]
if False:
flux_gauss = self.flux_w/4
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.gauss(ftpts, flux_a,2* flux_gauss , flux_gauss), np.zeros(len(ftpts)),
flux_freq, self.phase)[0]
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
for ii, d in enumerate(self.ramsey_pts):
self.markers['readout pulse'][ii] = ap2.square(
mtpts, 1, self.origin + self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(
mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
delay = d
w = self.half_pi_length
a = self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
np.add(ap2.sideband(wtpts,
ap2.square(wtpts, a, self.origin - w - 2 * self.ramp_sigma, w, self.ramp_sigma),
np.zeros(len(wtpts)),
self.freq, self.phase), ap2.sideband(wtpts,
ap2.square(wtpts, a,
self.origin - w - 2 * self.ramp_sigma - delay,
w, self.ramp_sigma),
np.zeros(len(wtpts)),
self.freq, self.phase))
self.markers['qubit buffer'][ii] = np.add(
ap2.square(mtpts, 1,
self.origin - w - 4 * self.ramp_sigma - 100,
w + 4 * self.ramp_sigma + 200),
(ap2.square(
mtpts, 1, self.origin - w - 4 * self.ramp_sigma -
delay - 100, w + 4 * self.ramp_sigma + 200)))
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
if self.pulse_type == 'gauss':
gauss_sigma = w
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
np.add(ap2.sideband(wtpts,
ap2.gauss(wtpts, a, self.origin - 3 * gauss_sigma, w), np.zeros(len(wtpts)),
self.freq, self.phase), ap2.sideband(wtpts,
ap2.gauss(wtpts, a,
self.origin - 3 * gauss_sigma - delay,
w), np.zeros(len(wtpts)),
self.freq, self.phase))
self.markers['qubit buffer'][ii] = np.add(
ap2.square(mtpts, 1, self.origin - 6 * gauss_sigma - 100,
6 * gauss_sigma + 200),
(ap2.square(mtpts, 1, self.origin - 6 * gauss_sigma -
delay - 100, 6 * gauss_sigma + 200)))
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
for ii, d in enumerate(self.ramsey_pts):
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
delay = d
w=self.half_pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
np.add(ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase),ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase))
self.markers['qubit buffer'][ii] = np.add(ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - 100,
w + 4 * self.ramp_sigma + 200),(ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - delay - 100,
w + 4 * self.ramp_sigma + 200)))
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
if self.pulse_type == 'gauss':
gauss_sigma = w
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
np.add(ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma, w), np.zeros(len(wtpts)),
self.freq, self.phase),ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - delay, w), np.zeros(len(wtpts)),
self.freq, self.phase))
self.markers['qubit buffer'][ii] = np.add(ap2.square(mtpts, 1, self.origin - 6*gauss_sigma-100,
6*gauss_sigma + 200),(ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - delay - 100,
6*gauss_sigma + 200)))
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
print(len(wtpts))
print(len(ftpts))
for ii, d in enumerate(self.mm_flux_sideband_freq_pts):
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
pulse_delay = self.flux_w + 100
self.markers['ch3m1'][ii] = ap2.square(mtpts, 1,self.origin - pulse_delay - self.tek2_delay_time,
100)
w=self.pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - pulse_delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - pulse_delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - pulse_delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100 - pulse_delay ,
6*gauss_sigma + 200)
flux_a = 1
flux_freq = d/1e9
flux_gauss = self.flux_w/6
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.gauss(ftpts, flux_a,3* flux_gauss , flux_gauss), np.zeros(len(ftpts)),
flux_freq, self.phase)[0]
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
for ii, d in enumerate(self.rabi_pts):
self.markers['ch3m1'][ii] = ap2.square(mtpts, 1,self.origin +self.measurement_delay - self.tek2_delay_time,
100)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
if self.sweep_type.upper() == 'time'.upper():
a = self.a
w = d
else:
a = d
w = self.w
if self.pulse_type=='square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type=='gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma , gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100,
6*gauss_sigma + 200)
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.square(ftpts, 1, 15 , 3000,5), np.zeros(len(ftpts)),
self.readout_freq, self.phase)[0]
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ii = 0
self.markers['readout pulse'][ii] = ap2.square(
mtpts, 1, self.origin + self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(
mtpts, 1, self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
ef_length = self.efprobe_len
w = self.pi_length
a = self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a, self.origin - w - 2 * self.ramp_sigma, w, self.ramp_sigma),
np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1, self.origin - w - 4 * self.ramp_sigma - 100,
w + 4 * self.ramp_sigma + 200)
self.waveforms['qubit drive I'][ii] += ap2.sideband(
wtpts,
ap2.square(wtpts, a,
self.origin - ef_length - w - 3 * self.ramp_sigma,
ef_length, self.ramp_sigma), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(
wtpts,
ap2.square(wtpts, a,
self.origin - ef_length - w - 3 * self.ramp_sigma,
ef_length, self.ramp_sigma), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(
mtpts, 1,
self.origin - ef_length - w - 4 * self.ramp_sigma - 100,
ef_length + 4 * self.ramp_sigma + 200)
if self.ge_pi:
self.waveforms['qubit drive I'][ii] += ap2.sideband(
wtpts,
ap2.square(
wtpts, a,
self.origin - ef_length - 2 * w - 3 * self.ramp_sigma,
w, self.ramp_sigma), np.zeros(len(wtpts)), self.freq,
self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(
wtpts,
ap2.square(
wtpts, a,
self.origin - ef_length - 2 * w - 3 * self.ramp_sigma,
w, self.ramp_sigma), np.zeros(len(wtpts)), self.freq,
self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(
mtpts, 1, self.origin - ef_length - 2 * w -
8 * self.ramp_sigma - 100, w + 4 * self.ramp_sigma + 200)
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
if self.pulse_type == 'gauss':
gauss_sigma = w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a, self.origin - 3 * gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1, self.origin - 6 * gauss_sigma - 100,
6 * gauss_sigma + 200)
self.waveforms['qubit drive I'][ii] += ap2.sideband(
wtpts,
ap2.gauss(wtpts, a,
self.origin - 3 * ef_length - 6 * gauss_sigma,
ef_length), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(
wtpts,
ap2.gauss(wtpts, a,
self.origin - 3 * ef_length - 6 * gauss_sigma,
ef_length), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(
mtpts, 1, self.origin - 6 * ef_length - 6 * gauss_sigma - 100,
6 * ef_length + 200)
if self.ge_pi:
self.waveforms['qubit drive I'][ii] += ap2.sideband(
wtpts,
ap2.gauss(
wtpts, a, self.origin - 3 * gauss_sigma -
6 * ef_length - 6 * gauss_sigma, gauss_sigma),
np.zeros(len(wtpts)), self.freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(
wtpts,
ap2.gauss(
wtpts, a, self.origin - 3 * gauss_sigma -
6 * ef_length - 6 * gauss_sigma, gauss_sigma),
np.zeros(len(wtpts)), self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(
mtpts, 1, self.origin - 6 * gauss_sigma - 6 * ef_length -
6 * gauss_sigma - 100, 6 * gauss_sigma + 200)
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ii =0
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
ef_length = self.efprobe_len
w=self.pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - 100,
w + 4 * self.ramp_sigma + 200)
self.waveforms['qubit drive I'][ii] += ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - ef_length - w - 3*self.ramp_sigma, ef_length, self.ramp_sigma), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - ef_length - w - 3*self.ramp_sigma, ef_length, self.ramp_sigma), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - ef_length - w - 4 * self.ramp_sigma- 100 ,
ef_length + 4 * self.ramp_sigma+ 200)
if self.ge_pi:
self.waveforms['qubit drive I'][ii] += ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - ef_length - 2*w - 3*self.ramp_sigma, w,self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - ef_length - 2*w - 3*self.ramp_sigma , w,self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - ef_length - 2*w - 8 * self.ramp_sigma - 100 ,
w + 4 * self.ramp_sigma+ 200)
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
if self.pulse_type == 'gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma , gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100 ,
6*gauss_sigma + 200)
self.waveforms['qubit drive I'][ii] += ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* ef_length - 6*gauss_sigma, ef_length), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* ef_length - 6*gauss_sigma, ef_length), np.zeros(len(wtpts)),
self.fe_sideband_freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - 6*ef_length - 6*gauss_sigma - 100 ,
6*ef_length+ 200)
if self.ge_pi:
self.waveforms['qubit drive I'][ii] += ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - 6*ef_length - 6*gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - 6*ef_length - 6*gauss_sigma , gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 6*ef_length - 6*gauss_sigma - 100 ,
6*gauss_sigma + 200)
high_values_indices = self.markers['qubit buffer'][ii] > 1
self.markers['qubit buffer'][ii][high_values_indices] = 1
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
print(len(wtpts))
print(len(ftpts))
for ii, d in enumerate(self.mm_flux_sideband_pts):
self.sb1_pulse = d
self.markers['readout pulse'][ii] = ap2.square(mtpts, 1, self.origin+self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
if self.measure_mode == 1:
pulse_delay = self.sb1_pulse*self.flux_pi_length_1 + self.flux_pi_length_2 + self.flux_pi_length_1 + 30*3 + 100
if self.measure_mode == 2:
pulse_delay = self.sb1_pulse*self.flux_pi_length_1 + self.flux_pi_length_2 + self.flux_pi_length_2 + 30*3 + 100
self.markers['ch3m1'][ii] = ap2.square(mtpts, 1,self.origin - pulse_delay - self.tek2_delay_time,
100)
w=self.pi_length
a=self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - pulse_delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - w - 4 * self.ramp_sigma - pulse_delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma=w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - pulse_delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
# self.waveforms['qubit drive I'][ii] +=ap2.sideband(wtpts,
# ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
# self.freq, self.phase)[0]
# self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
# ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
# self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] = ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100 - pulse_delay ,
6*gauss_sigma + 200)
# self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100,
# 6*gauss_sigma + 200)
flux_a_1 = self.flux_a_1
flux_freq_1 = self.flux_freq_1
flux_pi_length_1 = self.flux_pi_length_1
dc_offset_freq_1 = self.dc_offset_freq_1
flux_a_2 = self.flux_a_2
flux_freq_2 = self.flux_freq_2
flux_pi_length_2 = self.flux_pi_length_2
dc_offset_freq_2 = self.dc_offset_freq_2
if True:
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.square(ftpts, flux_a_1, 15 , self.sb1_pulse*flux_pi_length_1,5), np.zeros(len(ftpts)),
flux_freq_1, self.phase)[0]
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(ftpts,
ap2.square(ftpts, flux_a_2, 3*15+self.sb1_pulse*flux_pi_length_1 , flux_pi_length_2,5), np.zeros(len(ftpts)),
flux_freq_2, self.phase + 360*(dc_offset_freq_2)*(self.sb1_pulse*flux_pi_length_1+2*15)/1e9)[1]
if self.measure_mode == 1:
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(ftpts,
ap2.square(ftpts, flux_a_1, 5*15+self.sb1_pulse*flux_pi_length_1 + flux_pi_length_2 , flux_pi_length_1,5), np.zeros(len(ftpts)),
flux_freq_1, self.phase + 360*(dc_offset_freq_1)*(self.sb1_pulse*flux_pi_length_1 + flux_pi_length_2+4*15)/1e9)[1]
if self.measure_mode == 2:
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(ftpts,
ap2.square(ftpts, flux_a_2, 5*15+self.sb1_pulse*flux_pi_length_1+ flux_pi_length_2 , flux_pi_length_2,5), np.zeros(len(ftpts)),
flux_freq_2, self.phase + 360*(dc_offset_freq_2)*(self.sb1_pulse*flux_pi_length_1 + flux_pi_length_2+4*15)/1e9)[1]
if False:
flux_gauss = self.flux_w/4
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(ftpts,
ap2.gauss(ftpts, flux_a,2* flux_gauss , flux_gauss), np.zeros(len(ftpts)),
flux_freq, self.phase)[0]
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
print(len(wtpts))
print(len(ftpts))
for ii, d in enumerate(self.mm_flux_sideband_pts):
self.sb1_pulse = d
self.markers['readout pulse'][ii] = ap2.square(
mtpts, 1, self.origin + self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(
mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
if self.measure_mode == 1:
pulse_delay = self.sb1_pulse * self.flux_pi_length_1 + self.flux_pi_length_2 + self.flux_pi_length_1 + 30 * 3 + 100
if self.measure_mode == 2:
pulse_delay = self.sb1_pulse * self.flux_pi_length_1 + self.flux_pi_length_2 + self.flux_pi_length_2 + 30 * 3 + 100
self.markers['ch3m1'][ii] = ap2.square(
mtpts, 1, self.origin - pulse_delay - self.tek2_delay_time,
100)
w = self.pi_length
a = self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - pulse_delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1,
self.origin - w - 4 * self.ramp_sigma - pulse_delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma = w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - pulse_delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
# self.waveforms['qubit drive I'][ii] +=ap2.sideband(wtpts,
# ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
# self.freq, self.phase)[0]
# self.waveforms['qubit drive Q'][ii] += ap2.sideband(wtpts,
# ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma, gauss_sigma), np.zeros(len(wtpts)),
# self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1,
self.origin - 6 * gauss_sigma - 100 - pulse_delay,
6 * gauss_sigma + 200)
# self.markers['qubit buffer'][ii] += ap2.square(mtpts, 1, self.origin - 6*gauss_sigma - 100,
# 6*gauss_sigma + 200)
flux_a_1 = self.flux_a_1
flux_freq_1 = self.flux_freq_1
flux_pi_length_1 = self.flux_pi_length_1
dc_offset_freq_1 = self.dc_offset_freq_1
flux_a_2 = self.flux_a_2
flux_freq_2 = self.flux_freq_2
flux_pi_length_2 = self.flux_pi_length_2
dc_offset_freq_2 = self.dc_offset_freq_2
if True:
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(
ftpts,
ap2.square(ftpts, flux_a_1, 15,
self.sb1_pulse * flux_pi_length_1, 5),
np.zeros(len(ftpts)), flux_freq_1, self.phase)[0]
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(
ftpts,
ap2.square(ftpts, flux_a_2,
3 * 15 + self.sb1_pulse * flux_pi_length_1,
flux_pi_length_2, 5), np.zeros(len(ftpts)),
flux_freq_2, self.phase + 360 * (dc_offset_freq_2) *
(self.sb1_pulse * flux_pi_length_1 + 2 * 15) / 1e9)[1]
if self.measure_mode == 1:
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(
ftpts,
ap2.square(
ftpts, flux_a_1,
5 * 15 + self.sb1_pulse * flux_pi_length_1 +
flux_pi_length_2, flux_pi_length_1, 5),
np.zeros(len(ftpts)), flux_freq_1,
self.phase + 360 * (dc_offset_freq_1) *
(self.sb1_pulse * flux_pi_length_1 + flux_pi_length_2 +
4 * 15) / 1e9)[1]
if self.measure_mode == 2:
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(
ftpts,
ap2.square(
ftpts, flux_a_2,
5 * 15 + self.sb1_pulse * flux_pi_length_1 +
flux_pi_length_2, flux_pi_length_2, 5),
np.zeros(len(ftpts)), flux_freq_2,
self.phase + 360 * (dc_offset_freq_2) *
(self.sb1_pulse * flux_pi_length_1 + flux_pi_length_2 +
4 * 15) / 1e9)[1]
if False:
flux_gauss = self.flux_w / 4
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(
ftpts, ap2.gauss(ftpts, flux_a,
2 * flux_gauss, flux_gauss),
np.zeros(len(ftpts)), flux_freq, self.phase)[0]
def build_sequence(self):
PulseSequence.build_sequence(self)
wtpts = self.get_waveform_times('qubit drive I')
mtpts = self.get_marker_times('qubit buffer')
ftpts = self.get_waveform_times('qubit 1 flux')
print(len(wtpts))
print(len(ftpts))
for ii, d in enumerate(self.mm_flux_sideband_pts):
self.delay = d
self.markers['readout pulse'][ii] = ap2.square(
mtpts, 1, self.origin + self.measurement_delay,
self.measurement_width)
self.markers['card trigger'][ii] = ap2.square(
mtpts, 1,
self.origin - self.card_delay + self.measurement_delay,
self.card_trig_width)
pulse_delay = self.delay + 2 * self.flux_pi_length + 6 * self.half_pi_length + 100
self.markers['ch3m1'][ii] = ap2.square(
mtpts, 1, self.origin - pulse_delay - self.tek2_delay_time,
100)
w = self.half_pi_length
a = self.a
if self.pulse_type == 'square':
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.square(wtpts, a,self.origin - w - 2 * self.ramp_sigma - pulse_delay, w, self.ramp_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1,
self.origin - w - 4 * self.ramp_sigma - pulse_delay - 100,
w + 4 * self.ramp_sigma + 200)
if self.pulse_type == 'gauss':
gauss_sigma = w #covention for the width of gauss pulse
self.waveforms['qubit drive I'][ii], self.waveforms['qubit drive Q'][ii] = \
ap2.sideband(wtpts,
ap2.gauss(wtpts, a,self.origin - 3* gauss_sigma - pulse_delay, gauss_sigma), np.zeros(len(wtpts)),
self.freq, self.phase)
self.waveforms['qubit drive I'][ii] += ap2.sideband(
wtpts,
ap2.gauss(wtpts, a,
self.origin - 3 * gauss_sigma, gauss_sigma),
np.zeros(len(wtpts)), self.freq, self.phase)[0]
self.waveforms['qubit drive Q'][ii] += ap2.sideband(
wtpts,
ap2.gauss(wtpts, a,
self.origin - 3 * gauss_sigma, gauss_sigma),
np.zeros(len(wtpts)), self.freq, self.phase)[1]
self.markers['qubit buffer'][ii] = ap2.square(
mtpts, 1,
self.origin - 6 * gauss_sigma - 100 - pulse_delay,
6 * gauss_sigma + 200)
self.markers['qubit buffer'][ii] += ap2.square(
mtpts, 1, self.origin - 6 * gauss_sigma - 100,
6 * gauss_sigma + 200)
flux_a = self.flux_a
flux_freq = self.flux_freq
flux_pi_length = self.flux_pi_length
dc_offset_freq = self.dc_offset_freq
if True:
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(
ftpts, ap2.square(ftpts, flux_a, 15, flux_pi_length, 5),
np.zeros(len(ftpts)), flux_freq, self.phase)[0]
self.waveforms['qubit 1 flux'][ii] += ap2.sideband(
ftpts,
ap2.square(ftpts, flux_a,
3 * 15 + flux_pi_length + self.delay,
flux_pi_length, 5), np.zeros(len(ftpts)),
flux_freq, self.phase + 360 * (dc_offset_freq) *
(self.delay + flux_pi_length + 2 * 15) / 1e9)[1]
if False:
flux_gauss = self.flux_w / 4
self.waveforms['qubit 1 flux'][ii] = ap2.sideband(
ftpts, ap2.gauss(ftpts, flux_a,
2 * flux_gauss, flux_gauss),
np.zeros(len(ftpts)), flux_freq, self.phase)[0]