def __init__(self, attributed_process, enable_attr_from_filename=False,
enable_load_buttons=False, override_control_types=None,
separate_outputs=True, user_data=None, userlevel=0,
scroll=True):
"""
Parameters
----------
attributed_process: Process instance
process with attributes to be displayed
enable_attr_from_filename: bool (optional)
if enabled, it will be possible to specify an input filename to
build attributes from
override_control_types: dict (optional)
if given, this is a "factory" dict assigning new controller editor
types to some traits types in the parameters controller.
separate_outputs: bool
if True, inputs and outputs (traits with output=True set) will
be separated into two boxes.
user_data: any type (optional)
optional user data that can be accessed by individual control
editors
userlevel: int
the current user level: some traits may be marked with a non-zero userlevel, and will only be visible if the ControllerWidget userlevel is more than (or equal) the trait level.
scroll: bool
if True, the widget includes scrollbars in the parameters and
attributes sections when needed, otherwise it will be a fixed size
widget.
"""
super(AttributedProcessWidget, self).__init__()
self.setLayout(QtGui.QVBoxLayout())
self.layout().setContentsMargins(0, 0, 0, 0)
self.attributed_process = attributed_process
self._show_completion = False
self.user_data = user_data
self.separate_outputs = separate_outputs
self._userlevel = userlevel
process = attributed_process
completion_engine = getattr(process, 'completion_engine', None)
if completion_engine is not None:
splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
self.layout().addWidget(splitter)
spl_up = QtGui.QWidget()
spl_up.setLayout(QtGui.QVBoxLayout())
splitter.addWidget(spl_up)
spl_down = QtGui.QWidget()
spl_down.setLayout(QtGui.QVBoxLayout())
splitter.addWidget(spl_down)
else:
spl_up = self
spl_down = self
filename_widget = None
if enable_attr_from_filename and completion_engine is not None:
c = Controller()
c.add_trait('attributes_from_input_filename', File(optional=True))
filename_widget = ControllerWidget(c, live=True,
user_data=user_data)
spl_up.layout().addWidget(filename_widget)
self.input_filename_controller = c
c.on_trait_change(self.on_input_filename_changed,
'attributes_from_input_filename', dispatch='ui')
filename_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Fixed)
# groupbox area to show attributes
attrib_widget = QtGui.QGroupBox('Attributes:')
attrib_widget.setFlat(True)
attrib_widget.setAlignment(QtCore.Qt.AlignLeft)
attrib_widget.setLayout(QtGui.QVBoxLayout())
self.attrib_widget = attrib_widget
spl_up.layout().addWidget(attrib_widget)
attrib_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Preferred)
hlay = QtGui.QHBoxLayout()
spl_up.layout().addLayout(hlay)
# CheckBox to completion rules or not
self.checkbox_fom = QtGui.QCheckBox('Follow completion rules')
self.checkbox_fom.setChecked(True)
self.checkbox_fom.stateChanged.connect(self.on_use_fom_change)
hlay.addWidget(self.checkbox_fom)
# Button Show/Hide completion
self.btn_show_completion = QtGui.QCheckBox('Show completion')
self.btn_show_completion.setSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
hlay.addWidget(self.btn_show_completion)
self.btn_show_completion.stateChanged.connect(self.on_show_completion)
params = QtGui.QWidget()
playout = QtGui.QVBoxLayout()
params.setLayout(playout)
if scroll:
scroll_a = QtGui.QScrollArea()
scroll_a.setWidgetResizable(True)
scroll_a.setWidget(params)
spl_up.layout().addWidget(scroll_a)
scroll_a.setSizePolicy(QtGui.QSizePolicy.Preferred,
QtGui.QSizePolicy.Preferred)
params.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Preferred)
CWidgetClass = ScrollControllerWidget
else:
spl_up.layout().addWidget(params)
CWidgetClass = ControllerWidget
# groupbox area to show completion
if separate_outputs:
param_widget = QtGui.QGroupBox('Inputs:')
else:
param_widget = QtGui.QGroupBox('Parameters:')
param_widget.setFlat(True)
param_widget.setAlignment(QtCore.Qt.AlignLeft)
playout.addWidget(param_widget)
param_widget.setLayout(QtGui.QVBoxLayout())
param_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
if separate_outputs:
out_widget = QtGui.QGroupBox('Outputs:')
out_widget.setFlat(True)
out_widget.setAlignment(QtCore.Qt.AlignLeft)
playout.addWidget(out_widget)
out_widget.setLayout(QtGui.QVBoxLayout())
out_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
# use concise shape for lists GUI
from soma.qt_gui.controls import OffscreenListControlWidget
control_types_a = {'List': OffscreenListControlWidget}
control_types_p = {'List': OffscreenListControlWidget}
if override_control_types:
control_types_p.update(override_control_types)
#ControllerWidget._defined_controls['List'] = OffscreenListControlWidget
# Create controller widget for process and object_attribute
sel = None
if separate_outputs:
sel = 'inputs'
self.controller_widget = ControllerWidget(process, live=True,
parent=param_widget, override_control_types=control_types_p,
user_data=user_data, userlevel=userlevel, select_controls=sel)
if separate_outputs:
self.outputs_cwidget = ControllerWidget(process, live=True,
parent=out_widget, override_control_types=control_types_p,
user_data=user_data, userlevel=userlevel,
select_controls='outputs')
show_ce = (completion_engine is not None
and len(
completion_engine.get_attribute_values().user_traits())
!= 0)
if completion_engine is not None:
self.controller_widget2 = CWidgetClass(
completion_engine.get_attribute_values(),
live=True, parent=attrib_widget,
override_control_types=control_types_a, user_data=user_data,
userlevel=userlevel)
completion_engine.get_attribute_values().on_trait_change(
completion_engine.attributes_changed, 'anytrait')
else:
self.controller_widget2 = CWidgetClass(
Controller(), override_control_types=control_types_a,
user_data=user_data, userlevel=userlevel)
# Set controller of attributes and controller of process for each
# corresponding area
param_widget.layout().addWidget(self.controller_widget)
if separate_outputs:
out_widget.layout().addWidget(self.outputs_cwidget)
attrib_widget.layout().addWidget(self.controller_widget2)
if enable_load_buttons and completion_engine is not None:
io_lay = QtGui.QHBoxLayout()
self.layout().addLayout(io_lay)
self.btn_load_json = QtGui.QPushButton('Load attributes')
io_lay.addWidget(self.btn_load_json)
self.btn_load_json.clicked.connect(self.on_btn_load_json)
self.btn_save_json = QtGui.QPushButton('Save attributes')
io_lay.addWidget(self.btn_save_json)
self.btn_save_json.clicked.connect(self.on_btn_save_json)
if not show_ce:
if filename_widget:
filename_widget.hide()
attrib_widget.hide()
self.checkbox_fom.hide()
self.btn_show_completion.hide()
if hasattr(self, 'btn_load_json'):
self.btn_load_json.hide()
self.btn_save_json.hide()
self.show_completion(True) # hide file parts
else:
self.show_completion(False) # hide file parts
if completion_engine is not None:
completion_engine.on_trait_change(
self._completion_progress_changed, 'completion_progress',
dispatch='ui')
def __init__(self, process_with_fom, enable_attr_from_filename=False,
enable_load_buttons=False):
"""
Parameters
----------
process_with_fom: ProcessWithFom instance
process with FOM to be displayed
enable_attr_from_filename: bool (optional)
if enabled, it will be possible to specify an input filename to
build FOM attributes from
"""
super(ProcessWithFomWidget, self).__init__()
self.setLayout(QtGui.QVBoxLayout())
self.process_with_fom = process_with_fom
if enable_attr_from_filename:
c = Controller()
c.add_trait('attributes_from_input_filename', File(optional=True))
cw = ControllerWidget(c, live=True)
self.layout().addWidget(cw)
self.input_filename_controller = c
c.on_trait_change(self.on_input_filename_changed,
'attributes_from_input_filename')
cw.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Fixed)
#if self.process_with_fom.study_config.input_fom \
#!= self.process_with_fom.study_config.output_fom:
#c.add_trait('attributes_from_output_filename', File())
#c.on_trait_change(self.on_input_filename_changed,
#'attributes_from_output_filename')
# groupbox area to show attributs
attrib_widget = QtGui.QGroupBox('Attributes:')
attrib_widget.setAlignment(QtCore.Qt.AlignLeft)
attrib_widget.setLayout(QtGui.QVBoxLayout())
self.attrib_widget = attrib_widget
self.layout().addWidget(attrib_widget)
attrib_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Preferred)
hlay = QtGui.QHBoxLayout()
self.layout().addLayout(hlay)
# CheckBox to foms rules or not
self.checkbox_fom = QtGui.QCheckBox('Follow FOM rules')
self.checkbox_fom.setChecked(True)
self.checkbox_fom.stateChanged.connect(self.on_use_fom_change)
hlay.addWidget(self.checkbox_fom)
# Button Show/Hide completion
self.btn_show_completion = QtGui.QCheckBox('Show completion')
self.btn_show_completion.setSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
hlay.addWidget(self.btn_show_completion)
self.btn_show_completion.stateChanged.connect(self.on_show_completion)
# groupbox area to show completion
param_widget = QtGui.QGroupBox('Parameters:')
param_widget.setAlignment(QtCore.Qt.AlignLeft)
self.layout().addWidget(param_widget)
param_widget.setLayout(QtGui.QVBoxLayout())
param_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
# Create controller widget for process and object_attribute
process = process_with_fom.process
self.controller_widget = ScrollControllerWidget(process, live=True,
parent=param_widget)
self.controller_widget2 = ScrollControllerWidget(self.process_with_fom,
live=True, parent=attrib_widget)
self.process_with_fom.on_trait_change(
self.process_with_fom.attributes_changed, 'anytrait')
# Set controller of attributs and controller of process for each
# corresponding area
param_widget.layout().addWidget(self.controller_widget)
attrib_widget.layout().addWidget(self.controller_widget2)
if enable_load_buttons:
io_lay = QtGui.QHBoxLayout()
self.layout().addLayout(io_lay)
self.btn_load_json = QtGui.QPushButton('Load attributes')
io_lay.addWidget(self.btn_load_json)
self.btn_load_json.clicked.connect(self.on_btn_load_json)
self.btn_save_json = QtGui.QPushButton('Save attributes')
io_lay.addWidget(self.btn_save_json)
self.btn_save_json.clicked.connect(self.on_btn_save_json)
self.show_completion(False) # hide file parts
def __init__(self,
attributed_process,
enable_attr_from_filename=False,
enable_load_buttons=False):
"""
Parameters
----------
attributed_process: Process instance
process with attributes to be displayed
enable_attr_from_filename: bool (optional)
if enabled, it will be possible to specify an input filename to
build attributes from
"""
super(AttributedProcessWidget, self).__init__()
self.setLayout(QtGui.QVBoxLayout())
self.attributed_process = attributed_process
self._show_completion = False
process = attributed_process
completion_engine = getattr(process, 'completion_engine', None)
if completion_engine is not None:
splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
self.layout().addWidget(splitter)
spl_up = QtGui.QWidget()
spl_up.setLayout(QtGui.QVBoxLayout())
splitter.addWidget(spl_up)
spl_down = QtGui.QWidget()
spl_down.setLayout(QtGui.QVBoxLayout())
splitter.addWidget(spl_down)
else:
spl_up = self
spl_down = self
if enable_attr_from_filename and completion_engine is not None:
c = Controller()
c.add_trait('attributes_from_input_filename', File(optional=True))
cw = ControllerWidget(c, live=True)
spl_up.layout().addWidget(cw)
self.input_filename_controller = c
c.on_trait_change(self.on_input_filename_changed,
'attributes_from_input_filename',
dispatch='ui')
cw.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Fixed)
# groupbox area to show attributs
attrib_widget = QtGui.QGroupBox('Attributes:')
attrib_widget.setAlignment(QtCore.Qt.AlignLeft)
attrib_widget.setLayout(QtGui.QVBoxLayout())
self.attrib_widget = attrib_widget
spl_up.layout().addWidget(attrib_widget)
attrib_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Preferred)
hlay = QtGui.QHBoxLayout()
spl_up.layout().addLayout(hlay)
# CheckBox to completion rules or not
self.checkbox_fom = QtGui.QCheckBox('Follow completion rules')
self.checkbox_fom.setChecked(True)
self.checkbox_fom.stateChanged.connect(self.on_use_fom_change)
hlay.addWidget(self.checkbox_fom)
# Button Show/Hide completion
self.btn_show_completion = QtGui.QCheckBox('Show completion')
self.btn_show_completion.setSizePolicy(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed)
hlay.addWidget(self.btn_show_completion)
self.btn_show_completion.stateChanged.connect(self.on_show_completion)
# groupbox area to show completion
param_widget = QtGui.QGroupBox('Parameters:')
param_widget.setAlignment(QtCore.Qt.AlignLeft)
spl_down.layout().addWidget(param_widget)
param_widget.setLayout(QtGui.QVBoxLayout())
param_widget.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
# Create controller widget for process and object_attribute
self.controller_widget = ScrollControllerWidget(process,
live=True,
parent=param_widget)
if completion_engine is not None:
self.controller_widget2 = ScrollControllerWidget(
completion_engine.get_attribute_values(),
live=True,
parent=attrib_widget)
completion_engine.get_attribute_values().on_trait_change(
completion_engine.attributes_changed, 'anytrait')
else:
self.controller_widget2 = ScrollControllerWidget(Controller())
# Set controller of attributs and controller of process for each
# corresponding area
param_widget.layout().addWidget(self.controller_widget)
attrib_widget.layout().addWidget(self.controller_widget2)
if enable_load_buttons and completion_engine is not None:
io_lay = QtGui.QHBoxLayout()
self.layout().addLayout(io_lay)
self.btn_load_json = QtGui.QPushButton('Load attributes')
io_lay.addWidget(self.btn_load_json)
self.btn_load_json.clicked.connect(self.on_btn_load_json)
self.btn_save_json = QtGui.QPushButton('Save attributes')
io_lay.addWidget(self.btn_save_json)
self.btn_save_json.clicked.connect(self.on_btn_save_json)
if completion_engine is None:
attrib_widget.hide()
self.checkbox_fom.hide()
self.btn_show_completion.hide()
self.show_completion(True) # hide file parts
else:
self.show_completion(False) # hide file parts
if completion_engine is not None:
completion_engine.on_trait_change(
self._completion_progress_changed,
'completion_progress',
dispatch='ui')