def build_network(self, dynamics, cell_params):
"""
Function to build the basic network - dynamics should be a PyNN
synapse dynamics object
:param dynamics:
:return:
"""
# SpiNNaker setup
model = sim.IF_curr_exp
sim.setup(timestep=0.1, min_delay=1.0, max_delay=10.0)
# Create excitatory and inhibitory populations of neurons
ex_pop = sim.Population(NUM_EXCITATORY, model, cell_params)
in_pop = sim.Population(NUM_EXCITATORY / 4, model, cell_params)
# Record excitatory spikes
ex_pop.record()
# Make excitatory->inhibitory projections
sim.Projection(ex_pop, in_pop, sim.FixedProbabilityConnector(
0.02, weights=0.03), target='excitatory')
sim.Projection(ex_pop, ex_pop, sim.FixedProbabilityConnector(
0.02, weights=0.03), target='excitatory')
# Make inhibitory->inhibitory projections
sim.Projection(in_pop, in_pop, sim.FixedProbabilityConnector(
0.02, weights=-0.3), target='inhibitory')
# Make inhibitory->excitatory projections
ie_projection = sim.Projection(
in_pop, ex_pop, sim.FixedProbabilityConnector(0.02, weights=0),
target='inhibitory', synapse_dynamics=dynamics)
return ex_pop, ie_projection
def test_invalid_min_delay_1_millisecond_timestep(self):
"""
tests if with invalid user min, the min raises exefpetiosn
:return:
"""
with self.assertRaises(ConfigurationException):
p.setup(1, min_delay=0.1)
def test_invalid_max_delay(self):
"""
tests that with invalid user input the max delay raises correctly
:return:
"""
with self.assertRaises(ConfigurationException):
p.setup(1, max_delay=100000)
def test_valid_max_delay_0_1_millisecond_timestep(self):
"""
tests if with valid user min, the min is set correctly
:return:
"""
p.setup(0.1, max_delay=0.4)
max_delay = p.get_max_delay()
self.assertEqual(max_delay, 0.4)
def test_get_min_delay_0_1_milisecond_timestep(self):
"""
tests if with no user min, the min is set to 1 timestep in millisencsd
:return:
"""
p.setup(0.1)
min_delay = p.get_min_delay()
self.assertEqual(min_delay, 0.1)
def test_max_delay_no_user_input_1_millisecond_timestep(self):
"""
Tests that with no user input, the max delay is correct
:return:
"""
p.setup(1)
max_delay = p.get_max_delay()
self.assertEqual(max_delay, 144)
def test_script(self):
"""
test that tests the printing of v from a pre determined recording
:return:
"""
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 128 * 128 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_cond_exp", 256)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0,
'e_rev_E': 0.,
'e_rev_I': -80.
}
populations = list()
projections = list()
weight_to_spike = 0.035
delay = 17
spikes = read_spikefile('test.spikes', n_neurons)
print spikes
spike_array = {'spike_times': spikes}
populations.append(p.Population(
n_neurons, p.SpikeSourceArray, spike_array, label='inputSpikes_1'))
populations.append(p.Population(
n_neurons, p.IF_cond_exp, cell_params_lif, label='pop_1'))
projections.append(p.Projection(
populations[0], populations[1], p.OneToOneConnector(
weights=weight_to_spike, delays=delay)))
populations[1].record()
p.run(1000)
spikes = populations[1].getSpikes(compatible_output=True)
if spikes is not None:
print spikes
pylab.figure()
pylab.plot([i[1] for i in spikes], [i[0] for i in spikes], ".")
pylab.xlabel('Time/ms')
pylab.ylabel('spikes')
pylab.title('spikes')
pylab.show()
else:
print "No spikes received"
p.end()
def test_recording_numerious_element(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 20 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
boxed_array = numpy.zeros(shape=(0, 2))
spike_array = list()
for neuron_id in range(0, n_neurons):
spike_array.append(list())
for random_time in range(0, 20):
random_time2 = random.randint(0, 5000)
boxed_array = numpy.append(boxed_array,
[[neuron_id, random_time2]],
axis=0)
spike_array[neuron_id].append(random_time)
spike_array_params = {'spike_times': spike_array}
populations.append(
p.Population(n_neurons,
p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(
p.Population(n_neurons,
p.SpikeSourceArray,
spike_array_params,
label='inputSpikes_1'))
projections.append(
p.Projection(populations[1], populations[0],
p.OneToOneConnector()))
populations[1].record()
p.run(5000)
spike_array_spikes = populations[1].getSpikes()
boxed_array = boxed_array[numpy.lexsort(
(boxed_array[:, 1], boxed_array[:, 0]))]
numpy.testing.assert_array_equal(spike_array_spikes, boxed_array)
p.end()
def __init__(self,
simulation_time=1000,
simulation_time_step=0.2,
n_chips_required=48 * 6,
threads_count=4):
self.simulation_time = simulation_time
self.time_step = simulation_time_step
# setup timestep of simulation and minimum and maximum synaptic delays
ps.setup(timestep=simulation_time_step,
min_delay=simulation_time_step,
max_delay=10 * simulation_time_step,
n_chips_required=n_chips_required,
threads=threads_count)
def test_recording_numerious_element_over_limit(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 2000 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
boxed_array = numpy.zeros(shape=(0, 2))
spike_array = list()
for neuron_id in range(0, n_neurons):
spike_array.append(list())
for random_time in range(0, 200000):
random_time2 = random.randint(0, 50000)
boxed_array = numpy.append(
boxed_array, [[neuron_id, random_time2]], axis=0)
spike_array[neuron_id].append(random_time)
spike_array_params = {'spike_times': spike_array}
populations.append(p.Population(n_neurons, p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(p.Population(n_neurons, p.SpikeSourceArray,
spike_array_params,
label='inputSpikes_1'))
projections.append(p.Projection(populations[1], populations[0],
p.OneToOneConnector()))
populations[1].record()
p.run(50000)
spike_array_spikes = populations[1].getSpikes()
boxed_array = boxed_array[numpy.lexsort((boxed_array[:, 1],
boxed_array[:, 0]))]
numpy.testing.assert_array_equal(spike_array_spikes, boxed_array)
p.end()
def test_initial_setup(self):
import spynnaker.pyNN as pynn
self.assertEqual(pynn.setup(timestep=1, min_delay=1, max_delay=15.0),
0)
self.assertEqual(conf.config.getint("Machine", "machineTimeStep"),
1 * 1000)
self.assertEqual(pynn.get_min_delay(), 1)
self.assertEqual(pynn.get_max_delay(), 15.0)
def test_recording_1_element(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
spike_array = {'spike_times': [[0]]}
populations.append(
p.Population(n_neurons,
p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(
p.Population(1,
p.SpikeSourceArray,
spike_array,
label='inputSpikes_1'))
projections.append(
p.Projection(populations[1], populations[0],
p.AllToAllConnector()))
populations[1].record()
p.run(5000)
spike_array_spikes = populations[1].getSpikes()
boxed_array = numpy.zeros(shape=(0, 2))
boxed_array = numpy.append(boxed_array, [[0, 0]], axis=0)
numpy.testing.assert_array_equal(spike_array_spikes, boxed_array)
p.end()
def test_initial_setup(self):
import spynnaker.pyNN as pynn
self.assertEqual(pynn.setup(timestep=1, min_delay=1, max_delay=15.0),
None)
self.assertEqual(conf.config.getint("Machine", "machineTimeStep"),
1 * 1000)
self.assertEqual(pynn.get_min_delay(), 1)
self.assertEqual(pynn.get_max_delay(), 15.0)
def build_network(self, dynamics, cell_params):
"""
Function to build the basic network - dynamics should be a PyNN
synapse dynamics object
:param dynamics:
:return:
"""
# SpiNNaker setup
model = sim.IF_curr_exp
sim.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
# Create excitatory and inhibitory populations of neurons
ex_pop = sim.Population(NUM_EXCITATORY, model, cell_params)
in_pop = sim.Population(NUM_EXCITATORY / 4, model, cell_params)
# Record excitatory spikes
ex_pop.record()
# Make excitatory->inhibitory projections
sim.Projection(ex_pop,
in_pop,
sim.FixedProbabilityConnector(0.02, weights=0.03),
target='excitatory')
sim.Projection(ex_pop,
ex_pop,
sim.FixedProbabilityConnector(0.02, weights=0.03),
target='excitatory')
# Make inhibitory->inhibitory projections
sim.Projection(in_pop,
in_pop,
sim.FixedProbabilityConnector(0.02, weights=-0.3),
target='inhibitory')
# Make inhibitory->excitatory projections
ie_projection = sim.Projection(in_pop,
ex_pop,
sim.FixedProbabilityConnector(
0.02, weights=0),
target='inhibitory',
synapse_dynamics=dynamics)
return ex_pop, ie_projection
def test_recording_poisson_spikes_rate_0(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 256 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
populations.append(
p.Population(n_neurons,
p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(
p.Population(n_neurons,
p.SpikeSourcePoisson, {'rate': 0},
label='inputSpikes_1'))
projections.append(
p.Projection(populations[1], populations[0],
p.OneToOneConnector()))
populations[1].record()
p.run(5000)
spikes = populations[1].getSpikes()
print spikes
p.end()
def simulate(self, spinnaker, input_spike_times):
# Cell parameters
cell_params = {
'tau_m': 20.0,
'v_rest': -60.0,
'v_reset': -60.0,
'v_thresh': -40.0,
'tau_syn_E': 2.0,
'tau_syn_I': 2.0,
'tau_refrac': 2.0,
'cm': 0.25,
'i_offset': 0.0,
}
rng = p.NumpyRNG(seed=28375)
v_init = p.RandomDistribution('uniform', [-60, -40], rng)
p.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
pop = p.Population(1, p.IF_curr_exp, cell_params, label='population')
pop.randomInit(v_init)
pop.record()
pop.record_v()
noise = p.Population(1, p.SpikeSourceArray,
{"spike_times": input_spike_times})
p.Projection(noise,
pop,
p.OneToOneConnector(weights=0.4, delays=1),
target='excitatory')
# Simulate
p.run(self.simtime)
pop_voltages = pop.get_v(compatible_output=True)
pop_spikes = pop.getSpikes(compatible_output=True)
p.end()
return pop_voltages, pop_spikes
def main():
# setup timestep of simulation and minimum and maximum synaptic delays
Frontend.setup(timestep=simulationTimestep, min_delay=minSynapseDelay, max_delay=maxSynapseDelay, threads=4)
# create a spike sources
retinaLeft = createSpikeSource("RetL")
retinaRight = createSpikeSource("RetR")
# create network and attach the spike sources
network, (liveConnectionNetwork, liveConnectionRetinas) = createCooperativeNetwork(retinaLeft=retinaLeft, retinaRight=retinaRight)
# non-blocking run for time in milliseconds
print "Simulation started..."
Frontend.run(simulationTime)
print "Simulation ended."
# plot results
#
# plotExperiment(retinaLeft, retinaRight, network)
# finalise program and simulation
Frontend.end()
def test_recording_1_element(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
spike_array = {'spike_times': [[0]]}
populations.append(p.Population(n_neurons, p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(p.Population(1, p.SpikeSourceArray, spike_array,
label='inputSpikes_1'))
projections.append(p.Projection(populations[0], populations[0],
p.OneToOneConnector()))
populations[1].record()
p.run(5000)
spike_array_spikes = populations[1].getSpikes()
boxed_array = numpy.zeros(shape=(0, 2))
boxed_array = numpy.append(boxed_array, [[0, 0]], axis=0)
numpy.testing.assert_array_equal(spike_array_spikes, boxed_array)
p.end()
def simulate(self, spinnaker, input_spike_times):
# Cell parameters
cell_params = {
'tau_m': 20.0,
'v_rest': -60.0,
'v_reset': -60.0,
'v_thresh': -40.0,
'tau_syn_E': 2.0,
'tau_syn_I': 2.0,
'tau_refrac': 2.0,
'cm': 0.25,
'i_offset': 0.0,
}
rng = p.NumpyRNG(seed=28375)
v_init = p.RandomDistribution('uniform', [-60, -40], rng)
p.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
pop = p.Population(1, p.IF_curr_exp, cell_params, label='population')
pop.randomInit(v_init)
pop.record()
pop.record_v()
noise = p.Population(1, p.SpikeSourceArray,
{"spike_times": input_spike_times})
p.Projection(noise, pop, p.OneToOneConnector(weights=0.4, delays=1),
target='excitatory')
# Simulate
p.run(self.simtime)
pop_voltages = pop.get_v(compatible_output=True)
pop_spikes = pop.getSpikes(compatible_output=True)
p.end()
return pop_voltages, pop_spikes
def build_network(dynamics):
# SpiNNaker setup
sim.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
# Create excitatory and inhibitory populations of neurons
ex_pop = sim.Population(NUM_EXCITATORY, model, cell_params)
in_pop = sim.Population(NUM_EXCITATORY / 4, model, cell_params)
# Record excitatory spikes
ex_pop.record()
# Make excitatory->inhibitory projections
sim.Projection(ex_pop, in_pop, sim.FixedProbabilityConnector(0.02, weights=0.03), target='excitatory')
sim.Projection(ex_pop, ex_pop, sim.FixedProbabilityConnector(0.02, weights=0.03), target='excitatory')
# Make inhibitory->inhibitory projections
sim.Projection(in_pop, in_pop, sim.FixedProbabilityConnector(0.02, weights=-0.3), target='inhibitory')
# Make inhibitory->excitatory projections
ie_projection = sim.Projection(in_pop, ex_pop, sim.FixedProbabilityConnector(0.02, weights=0), target='inhibitory', synapse_dynamics = dynamics)
return ex_pop, ie_projection
def test_recording_poisson_spikes_rate_0(self):
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
n_neurons = 256 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
populations.append(p.Population(n_neurons, p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(p.Population(n_neurons, p.SpikeSourcePoisson,
{'rate': 0},
label='inputSpikes_1'))
projections.append(p.Projection(populations[1], populations[0],
p.OneToOneConnector()))
populations[1].record()
p.run(5000)
spikes = populations[1].getSpikes()
print spikes
p.end()
def main():
# setup timestep of simulation and minimum and maximum synaptic delays
Frontend.setup(timestep=simulationTimestep, min_delay=minSynapseDelay, max_delay=maxSynapseDelay, threads=4)
# create a spike sources
retinaLeft = createSpikeSource("RetL")
retinaRight = createSpikeSource("RetR")
# create network and attach the spike sources
network = createCooperativeNetwork(retinaLeft=retinaLeft, retinaRight=retinaRight)
# run simulation for time in milliseconds
print "Simulation started..."
Frontend.run(simulationTime)
# print network[0][1].label
# spikeList = network[0][1].getSpikes()
# print spikeList
# finalise program and simulation
Frontend.end()
print "Simulation ended."
from NetworkVisualiser import logFile
logFile.close()
def start_sim(self,sim_time):
#simulation setup
self.simtime = sim_time
sim.setup(timestep=self.setup_cond["timestep"], min_delay=self.setup_cond["min_delay"], max_delay=self.setup_cond["max_delay"])
#initialise the neuron population
spikeArrayOn = {'spike_times': self.in_spike}
pre_pop = sim.Population(self.pre_pop_size, sim.SpikeSourceArray,
spikeArrayOn, label='inputSpikes_On')
post_pop= sim.Population(self.post_pop_size,sim.IF_curr_exp,
self.cell_params_lif, label='post_1')
stdp_model = sim.STDPMechanism(timing_dependence=sim.SpikePairRule(tau_plus= self.stdp_param["tau_plus"],
tau_minus= self.stdp_param["tau_minus"],
nearest=True),
weight_dependence=sim.MultiplicativeWeightDependence(w_min= self.stdp_param["w_min"],
w_max= self.stdp_param["w_max"],
A_plus= self.stdp_param["A_plus"],
A_minus= self.stdp_param["A_minus"]))
#initialise connectiviity of neurons
#exitatory connection between pre-synaptic and post-synaptic neuron population
if(self.inhibitory_spike_mode):
connectionsOn = sim.Projection(pre_pop, post_pop, sim.AllToAllConnector(weights = self.I_syn_weight,delays=1,
allow_self_connections=False),
target='inhibitory')
else:
if(self.STDP_mode):
if(self.allsameweight):
connectionsOn = sim.Projection(pre_pop, post_pop,
sim.AllToAllConnector(weights = self.E_syn_weight,delays=1),
synapse_dynamics=sim.SynapseDynamics(slow=stdp_model),target='excitatory')
else:
connectionsOn = sim.Projection(pre_pop, post_pop,
sim.FromListConnector(self.conn_list),
synapse_dynamics=sim.SynapseDynamics(slow=stdp_model),target='excitatory')
else:
if(self.allsameweight):
connectionsOn = sim.Projection(pre_pop, post_pop, sim.AllToAllConnector(weights = self.E_syn_weight,delays=1),
target='excitatory')
else:
connectionsOn = sim.Projection(pre_pop, post_pop, sim.FromListConnector(self.conn_list),
target='excitatory')
#sim.Projection.setWeights(self.E_syn_weight)
#inhibitory between the neurons post-synaptic neuron population
connection_I = sim.Projection(post_pop, post_pop, sim.AllToAllConnector(weights = self.I_syn_weight,delays=1,
allow_self_connections=False),
target='inhibitory')
pre_pop.record()
post_pop.record()
post_pop.record_v()
sim.run(self.simtime)
self.pre_spikes = pre_pop.getSpikes(compatible_output=True)
self.post_spikes = post_pop.getSpikes(compatible_output=True)
self.post_spikes_v = post_pop.get_v(compatible_output=True)
self.trained_weights = connectionsOn.getWeights(format='array')
sim.end()
#print self.conn_list
#print self.trained_weights
'''scipy.io.savemat('trained_weight.mat',{'initial_weight':self.init_weights,
'trained_weight':self.trained_weights
})'''
scipy.io.savemat('trained_weight0.mat',{'trained_weight':self.trained_weights
})
def test_get_voltage(self):
"""
test that tests the getting of v from a pre determined recording
:return:
"""
p.setup(timestep=1, min_delay=1.0, max_delay=14.40)
n_neurons = 200 # number of neurons in each population
runtime = 500
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 1.7
loop_connections = list()
for i in range(0, n_neurons):
single_connection = (i, ((i + 1) % n_neurons), weight_to_spike,
delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(
p.Population(n_neurons,
p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(
p.Population(1,
p.SpikeSourceArray,
spike_array,
label='inputSpikes_1'))
projections.append(
p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(
p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
populations[0].record_gsyn()
populations[0].record()
p.run(runtime)
v = populations[0].get_v(compatible_output=True)
current_file_path = os.path.dirname(os.path.abspath(__file__))
current_file_path = os.path.join(current_file_path, "v.data")
pre_recorded_data = p.utility_calls.read_in_data_from_file(
current_file_path, 0, n_neurons, 0, runtime)
p.end()
for spike_element, read_element in zip(v, pre_recorded_data):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
self.assertEqual(round(spike_element[2], 1),
round(read_element[2], 1))
def estimate_kb(cell_params_lif):
cell_para = copy.deepcopy(cell_params_lif)
random.seed(0)
p.setup(timestep=1.0, min_delay=1.0, max_delay=16.0)
run_s = 10.
runtime = 1000. * run_s
max_rate = 1000.
ee_connector = p.OneToOneConnector(weights=1.0, delays=2.0)
pop_list = []
pop_output = []
pop_source = []
x = np.arange(0., 1.01, 0.1)
count = 0
trail = 10
for i in x:
for j in range(trail): #trails for average
pop_output.append(p.Population(1, p.IF_curr_exp, cell_para))
poisson_spikes = poisson_generator(i * max_rate, 0, runtime)
pop_source.append(
p.Population(1, p.SpikeSourceArray,
{'spike_times': poisson_spikes}))
p.Projection(pop_source[count],
pop_output[count],
ee_connector,
target='excitatory')
pop_output[count].record()
count += 1
count = 0
for i in x:
cell_para['i_offset'] = i
pop_list.append(p.Population(1, p.IF_curr_exp, cell_para))
pop_list[count].record()
count += 1
pop_list[count - 1].record_v()
p.run(runtime)
rate_I = np.zeros(count)
rate_P = np.zeros(count)
rate_P_max = np.zeros(count)
rate_P_min = np.ones(count) * 1000.
for i in range(count):
spikes = pop_list[i].getSpikes(compatible_output=True)
rate_I[i] = len(spikes) / run_s
for j in range(trail):
spikes = pop_output[i * trail +
j].getSpikes(compatible_output=True)
spike_num = len(spikes) / run_s
rate_P[i] += spike_num
if spike_num > rate_P_max[i]:
rate_P_max[i] = spike_num
if spike_num < rate_P_min[i]:
rate_P_min[i] = spike_num
rate_P[i] /= trail
'''
#plot_spikes(spikes, 'Current = 10. mA')
plt.plot(x, rate_I, label='current',)
plt.plot(x, rate_P, label='Poisson input')
plt.fill_between(x, rate_P_min, rate_P_max, facecolor = 'green', alpha=0.3)
'''
x0 = np.where(rate_P > 1.)[0][0]
x1 = 4
k = (rate_P[x1] - rate_P[x0]) / (x[x1] - x[x0])
'''
plt.plot(x, k*(x-x[x0])+rate_P[x0], label='linear')
plt.legend(loc='upper left', shadow=True)
plt.grid('on')
plt.show()
'''
p.end()
return k, x[x0], rate_P[x0]
import unittest
from spynnaker.pyNN.models.neuron.builds.if_curr_dual_exp import IFCurrDualExp
import spynnaker.pyNN as pyNN
if not pyNN:
pyNN.setup(1, 1, 15)
class TestIFCurrDualExpModel(unittest.TestCase):
def test_new_if_curr_dual_exp_model(self):
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_E2': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0}
n_neurons = 10
if_curr_dual_exp = IFCurrDualExp(
n_neurons, 1000, 1.0, **cell_params_lif)
self.assertEqual(if_curr_dual_exp.model_name, "IF_curr_dual_exp")
self.assertEqual(len(if_curr_dual_exp.get_parameters()), 10)
self.assertEqual(if_curr_dual_exp._v_thresh,
cell_params_lif['v_thresh'])
self.assertEqual(if_curr_dual_exp._v_reset, cell_params_lif['v_reset'])
self.assertEqual(if_curr_dual_exp._v_rest, cell_params_lif['v_rest'])
self.assertEqual(if_curr_dual_exp._tau_m, cell_params_lif['tau_m'])
self.assertEqual(if_curr_dual_exp._tau_refrac,
def test_from_file_connector(self):
# create files as needed for tests
# From_File_Generator.create_files()
pop_size = 32
min_weight = 0.1
max_weight = 5.0
rng_weights = p.NumpyRNG(seed=369121518)
weight_dependence_n = \
p.RandomDistribution(
distribution='uniform',
parameters=[1.0 + min_weight, 1.0 + max_weight],
rng=rng_weights)
weight_dependence_e = \
p.RandomDistribution(distribution='uniform',
parameters=[min_weight, max_weight],
rng=rng_weights)
file_num_i_p2 = 2
file_num_p1_p2 = 2
runtime = 10000.0
stim_start = 0.0
stim_rate = 10
pops_to_observe = ['mapped_pop_1', 'mapped_pop_2']
# Simulation Setup
p.setup(timestep=1.0, min_delay=1.0, max_delay=11.0)
# Neural Parameters
tau_m = 24.0 # (ms)
cm = 1
v_rest = -65.0 # (mV)
v_thresh = -45.0 # (mV)
v_reset = -65.0 # (mV)
t_refrac = 3.0 # (ms) (clamped at v_reset)
tau_syn_exc = 3.0
tau_syn_inh = tau_syn_exc * 3
# cell_params will be passed to the constructor of the Population Object
cell_params = {'tau_m': tau_m,
'cm': cm,
'v_init': v_reset,
'v_rest': v_rest,
'v_reset': v_reset,
'v_thresh': v_thresh,
'tau_syn_E': tau_syn_exc,
'tau_syn_I': tau_syn_inh,
'tau_refrac': t_refrac,
'i_offset': 0}
observed_pop_list = []
inputs = p.Population(pop_size, p.SpikeSourcePoisson,
{'duration': runtime, 'start': stim_start,
'rate': stim_rate},
label="inputs")
if 'inputs' in pops_to_observe:
inputs.record()
observed_pop_list.append(inputs)
mapped_pop_1 = p.Population(pop_size, p.IF_curr_exp, cell_params,
label="mapped_pop_1")
if 'mapped_pop_1' in pops_to_observe:
mapped_pop_1.record()
observed_pop_list.append(mapped_pop_1)
pop_inhibit = p.Population(pop_size, p.IF_curr_exp, cell_params,
label="pop_inhibit")
if 'pop_inhibit' in pops_to_observe:
pop_inhibit.record()
observed_pop_list.append(pop_inhibit)
mapped_pop_2 = p.Population(pop_size, p.IF_curr_exp, cell_params,
label="mapped_pop_2")
if 'mapped_pop_2' in pops_to_observe:
mapped_pop_2.record()
observed_pop_list.append(mapped_pop_2)
p.Projection(inputs, mapped_pop_1,
p.OneToOneConnector(weights=weight_dependence_n,
delays=1.0),
target='excitatory')
p.Projection(mapped_pop_1, pop_inhibit,
p.OneToOneConnector(
weights=weight_dependence_e, delays=1.0),
target='excitatory')
p.Projection(pop_inhibit, mapped_pop_2,
p.FromFileConnector(conn_file="List_I_p2_form_%d.txt"
% file_num_i_p2),
target='inhibitory')
p.Projection(mapped_pop_1, mapped_pop_2,
p.FromFileConnector(conn_file="List_I_p2_form_%d.txt"
% file_num_p1_p2),
target='excitatory')
# From_File_Generator.remove_files()
p.run(runtime)
for pop in observed_pop_list:
data = numpy.asarray(pop.getSpikes())
current_file_path = os.path.dirname(os.path.abspath(__file__))
current_pop_file_path = os.path.join(current_file_path,
"{}.data".format(pop.label))
# pop.printSpikes(current_pop_file_path)
pre_recorded_data = p.utility_calls.read_spikes_from_file(
current_pop_file_path, 0, pop_size, 0, runtime)
for spike_element, read_element in zip(data, pre_recorded_data):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
threads = 1
rngseed = 98766987
parallel_safe = True
ts = 0.1 # simulation timestep in ms
simulation_time = 2000 # ms
n_input_neurons = 4
n_readout_neurons = 2 #
n_reservoir_neurons = 59
exc_rate = 0.8 # 80% of reservoir neurons are excitatory
n_reservoir_exc = int(np.ceil(n_reservoir_neurons * exc_rate))
n_reservoir_inh = n_reservoir_neurons - n_reservoir_exc
pynn.setup(timestep=ts, min_delay=ts, max_delay=2.0 * ts)
pynn.set_number_of_neurons_per_core('IF_curr_exp',
100) # this will set 100 neurons per core
#======================================================
#===
#=== Define Neural Populations
#===
#======================================================
############# Reservoir #################
# set up the reservoir population
celltype = pynn.IZK_cond_exp()
cell_params = {}
def test_get_spikes(self):
"""
test for get spikes
:return:
"""
p.setup(timestep=1, min_delay=1.0, max_delay=14.40)
n_neurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 1.7
loop_connections = list()
for i in range(0, n_neurons):
single_connection = (i, ((i + 1) % n_neurons), weight_to_spike, delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(p.Population(n_neurons, p.IF_curr_exp, cell_params_lif,
label='pop_1'))
populations.append(p.Population(1, p.SpikeSourceArray, spike_array,
label='inputSpikes_1'))
projections.append(p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
populations[0].record_gsyn()
populations[0].record()
p.run(500)
spikes = populations[0].getSpikes(compatible_output=True)
pre_recorded_spikes = [
[0, 3.5], [1, 6.7], [2, 9.9], [3, 13.1], [4, 16.3],
[5, 19.5], [6, 22.7], [7, 25.9], [8, 29.1],
[9, 32.3], [10, 35.5], [11, 38.7], [12, 41.9],
[13, 45.1], [14, 48.3], [15, 51.5], [16, 54.7],
[17, 57.9], [18, 61.1], [19, 64.3], [20, 67.5],
[21, 70.7], [22, 73.9], [23, 77.1], [24, 80.3],
[25, 83.5], [26, 86.7], [27, 89.9], [28, 93.1],
[29, 96.3], [30, 99.5], [31, 102.7], [32, 105.9],
[33, 109.1], [34, 112.3], [35, 115.5], [36, 118.7],
[37, 121.9], [38, 125.1], [39, 128.3], [40, 131.5],
[41, 134.7], [42, 137.9], [43, 141.1], [44, 144.3],
[45, 147.5], [46, 150.7], [47, 153.9], [48, 157.1],
[49, 160.3], [50, 163.5], [51, 166.7], [52, 169.9],
[53, 173.1], [54, 176.3], [55, 179.5], [56, 182.7],
[57, 185.9], [58, 189.1], [59, 192.3], [60, 195.5]]
p.end()
for spike_element, read_element in zip(spikes, pre_recorded_spikes):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
def test_something(self):
#!/usr/bin/python
import pylab
import spynnaker.pyNN as p
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
nNeurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", nNeurons / 2)
cell_params_lif = {'cm' : 0.25, # nF
'i_offset' : 0.0,
'tau_m' : 20.0,
'tau_refrac': 2.0,
'tau_syn_E' : 5.0,
'tau_syn_I' : 5.0,
'v_reset' : -70.0,
'v_rest' : -65.0,
'v_thresh' : -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 17
loop_connections = list()
for i in range(0, nNeurons):
single_connection = (i, ((i + 1) % nNeurons),
weight_to_spike, delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(p.Population(nNeurons, p.IF_curr_exp,
cell_params_lif, label='pop_1'))
populations.append(p.Population(1, p.SpikeSourceArray,
spike_array, label='inputSpikes_1'))
projections.append(
p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(
p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
#populations[0].record_gsyn()
#populations[0].record(visualiser_mode=p.VISUALISER_MODES.RASTER)
p.run(5000)
v = None
gsyn = None
spikes = None
v = populations[0].get_v(compatible_output=True)
#assert(v == )
#gsyn = populations[0].get_gsyn(compatible_output=True)
#spikes = populations[0].getSpikes(compatible_output=True)
if spikes is not None:
print spikes
pylab.figure()
pylab.plot([i[1] for i in spikes], [i[0] for i in spikes], ".")
pylab.xlabel('Time/ms')
pylab.ylabel('spikes')
pylab.title('spikes')
pylab.show()
else:
print "No spikes received"
# Make some graphs
if v is not None:
ticks = len(v) / nNeurons
pylab.figure()
pylab.xlabel('Time/ms')
pylab.ylabel('v')
pylab.title('v')
for pos in range(0, nNeurons, 20):
v_for_neuron = v[pos * ticks : (pos + 1) * ticks]
pylab.plot([i[1] for i in v_for_neuron],
[i[2] for i in v_for_neuron])
pylab.show()
if gsyn is not None:
ticks = len(gsyn) / nNeurons
pylab.figure()
pylab.xlabel('Time/ms')
pylab.ylabel('gsyn')
pylab.title('gsyn')
for pos in range(0, nNeurons, 20):
gsyn_for_neuron = gsyn[pos * ticks : (pos + 1) * ticks]
pylab.plot([i[1] for i in gsyn_for_neuron],
[i[2] for i in gsyn_for_neuron])
pylab.show()
p.end(stop_on_board=True)
import spinnman.messages.eieio.eieio_type as eieio_type
import numpy
import pylab
# host_IP = '192.169.110.2' # when Spinn-3 is connected
# host_IP = '192.168.1.2' # when Spinn-5 is connected
# Base code from:
# http://spinnakermanchester.github.io/2015.005.Arbitrary/workshop_material/
simulation_timestep = 0.2
sim.setup(timestep=simulation_timestep,
min_delay=simulation_timestep,
max_delay=simulation_timestep * 144)
# Generate the connections matrix inside the Liquid (Liquid->Liquid) - according to Maass2002
#
print "Liquid->Liquid connections..."
Number_of_neurons_lsm = numpy.load("Number_of_neurons_lsm.npy")
#
# These are the cell (neuron) parameters according to Maass 2002
#
cell_params_lsm = {
'cm': 30, # Capacitance of the membrane
# =>>>> MAASS PAPER DOESN'T MENTION THIS PARAMETER DIRECTLY
# but the paper mentions a INPUT RESISTANCE OF 1MEGA Ohms and tau_m=RC=30ms, so cm=30nF
"""
Synfirechain-like example
"""
import spynnaker.pyNN as p
import pylab
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
nNeurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", nNeurons / 2)
runtime = 1000
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 17
loopConnections = list()
for i in range(0, nNeurons):
def __init__(self):
# initial call to set up the front end (pynn requirement)
Frontend.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
use_c_visualiser = True
use_spike_injector = True
# neurons per population and the length of runtime in ms for the
# simulation, as well as the expected weight each spike will contain
self.n_neurons = 100
# set up gui
p = None
if use_spike_injector:
from multiprocessing import Process
from multiprocessing import Event
ready = Event()
p = Process(target=GUI, args=[self.n_neurons, ready])
p.start()
ready.wait()
# different runtimes for demostration purposes
run_time = None
if not use_c_visualiser and not use_spike_injector:
run_time = 1000
elif use_c_visualiser and not use_spike_injector:
run_time = 10000
elif use_c_visualiser and use_spike_injector:
run_time = 100000
elif not use_c_visualiser and use_spike_injector:
run_time = 10000
weight_to_spike = 2.0
# neural parameters of the IF_curr model used to respond to injected
# spikes.
# (cell params for a synfire chain)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
##################################
# Parameters for the injector population. This is the minimal set of
# parameters required, which is for a set of spikes where the key is
# not important. Note that a virtual key *will* be assigned to the
# population, and that spikes sent which do not match this virtual key
# will be dropped; however, if spikes are sent using 16-bit keys, they
# will automatically be made to match the virtual key. The virtual
# key assigned can be obtained from the database.
##################################
cell_params_spike_injector = {
# The port on which the spiNNaker machine should listen for
# packets. Packets to be injected should be sent to this port on
# the spiNNaker machine
'port': 12345
}
##################################
# Parameters for the injector population. Note that each injector
# needs to be given a different port. The virtual key is assigned
# here, rather than being allocated later. As with the above, spikes
# injected need to match this key, and this will be done automatically
# with 16-bit keys.
##################################
cell_params_spike_injector_with_key = {
# The port on which the spiNNaker machine should listen for
# packets. Packets to be injected should be sent to this port on
# the spiNNaker machine
'port': 12346,
# This is the base key to be used for the injection, which is used
# to allow the keys to be routed around the spiNNaker machine.
# This assignment means that 32-bit keys must have the high-order
# 16-bit set to 0x7; This will automatically be prepended to
# 16-bit keys.
'virtual_key': 0x70000
}
# create synfire populations (if cur exp)
pop_forward = Frontend.Population(
self.n_neurons, Frontend.IF_curr_exp,
cell_params_lif, label='pop_forward')
pop_backward = Frontend.Population(
self.n_neurons, Frontend.IF_curr_exp,
cell_params_lif, label='pop_backward')
# Create injection populations
injector_forward = None
injector_backward = None
if use_spike_injector:
injector_forward = Frontend.Population(
self.n_neurons, ExternalDevices.SpikeInjector,
cell_params_spike_injector_with_key,
label='spike_injector_forward')
injector_backward = Frontend.Population(
self.n_neurons, ExternalDevices.SpikeInjector,
cell_params_spike_injector, label='spike_injector_backward')
else:
spike_times = []
for _ in range(0, self.n_neurons):
spike_times.append([])
spike_times[0] = [0]
spike_times[20] = [(run_time / 100) * 20]
spike_times[40] = [(run_time / 100) * 40]
spike_times[60] = [(run_time / 100) * 60]
spike_times[80] = [(run_time / 100) * 80]
cell_params_forward = {'spike_times': spike_times}
spike_times_backwards = []
for _ in range(0, self.n_neurons):
spike_times_backwards.append([])
spike_times_backwards[0] = [(run_time / 100) * 80]
spike_times_backwards[20] = [(run_time / 100) * 60]
spike_times_backwards[40] = [(run_time / 100) * 40]
spike_times_backwards[60] = [(run_time / 100) * 20]
spike_times_backwards[80] = [0]
cell_params_backward = {'spike_times': spike_times_backwards}
injector_forward = Frontend.Population(
self.n_neurons, Frontend.SpikeSourceArray,
cell_params_forward,
label='spike_injector_forward')
injector_backward = Frontend.Population(
self.n_neurons, Frontend.SpikeSourceArray,
cell_params_backward, label='spike_injector_backward')
# Create a connection from the injector into the populations
Frontend.Projection(
injector_forward, pop_forward,
Frontend.OneToOneConnector(weights=weight_to_spike))
Frontend.Projection(
injector_backward, pop_backward,
Frontend.OneToOneConnector(weights=weight_to_spike))
# Synfire chain connections where each neuron is connected to its next
# neuron
# NOTE: there is no recurrent connection so that each chain stops once
# it reaches the end
loop_forward = list()
loop_backward = list()
for i in range(0, self.n_neurons - 1):
loop_forward.append((i, (i + 1) %
self.n_neurons, weight_to_spike, 3))
loop_backward.append(((i + 1) %
self.n_neurons, i, weight_to_spike, 3))
Frontend.Projection(pop_forward, pop_forward,
Frontend.FromListConnector(loop_forward))
Frontend.Projection(pop_backward, pop_backward,
Frontend.FromListConnector(loop_backward))
# record spikes from the synfire chains so that we can read off valid
# results in a safe way afterwards, and verify the behavior
pop_forward.record()
pop_backward.record()
# Activate the sending of live spikes
ExternalDevices.activate_live_output_for(
pop_forward, database_notify_host="localhost",
database_notify_port_num=19996)
ExternalDevices.activate_live_output_for(
pop_backward, database_notify_host="localhost",
database_notify_port_num=19996)
if not use_c_visualiser:
# if not using the c visualiser, then a new spynnaker live spikes
# connection is created to define that there are python code which
# receives the outputted spikes.
live_spikes_connection_receive = SpynnakerLiveSpikesConnection(
receive_labels=["pop_forward", "pop_backward"],
local_port=19999, send_labels=None)
# Set up callbacks to occur when spikes are received
live_spikes_connection_receive.add_receive_callback(
"pop_forward", receive_spikes)
live_spikes_connection_receive.add_receive_callback(
"pop_backward", receive_spikes)
# Run the simulation on spiNNaker
Frontend.run(run_time)
# Retrieve spikes from the synfire chain population
spikes_forward = pop_forward.getSpikes()
spikes_backward = pop_backward.getSpikes()
# If there are spikes, plot using matplotlib
if len(spikes_forward) != 0 or len(spikes_backward) != 0:
pylab.figure()
if len(spikes_forward) != 0:
pylab.plot([i[1] for i in spikes_forward],
[i[0] for i in spikes_forward], "b.")
if len(spikes_backward) != 0:
pylab.plot([i[1] for i in spikes_backward],
[i[0] for i in spikes_backward], "r.")
pylab.ylabel('neuron id')
pylab.xlabel('Time/ms')
pylab.title('spikes')
pylab.show()
else:
print "No spikes received"
# Clear data structures on spiNNaker to leave the machine in a clean
# state for future executions
Frontend.end()
if use_spike_injector:
p.join()
def test_print_spikes(self):
machine_time_step = 0.1
p.setup(timestep=machine_time_step, min_delay=1.0, max_delay=14.40)
n_neurons = 20 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 1.7
loop_connections = list()
for i in range(0, n_neurons):
single_connection = (i, ((i + 1) % n_neurons), weight_to_spike,
delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(p.Population(n_neurons, p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(p.Population(1, p.SpikeSourceArray, spike_array,
label='inputSpikes_1'))
projections.append(p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
populations[0].record_gsyn()
populations[0].record()
p.run(500)
spikes = populations[0].getSpikes(compatible_output=True)
current_file_path = os.path.dirname(os.path.abspath(__file__))
current_file_path = os.path.join(current_file_path, "spikes.data")
spike_file = populations[0].printSpikes(current_file_path)
spike_reader = p.utility_calls.read_spikes_from_file(
current_file_path, min_atom=0, max_atom=n_neurons,
min_time=0, max_time=500)
read_in_spikes = spike_reader.spike_times
p.end()
os.remove(current_file_path)
for spike_element, read_element in zip(spikes, read_in_spikes):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
import numpy
import pylab
from pprint import pprint
delay = 1.0
sim_length = 100
num_neurons = 100
spike_weight = 2.0
delay = 17
p.setup(
timestep=1.0,
min_delay=1.0,
max_delay=100.0,
debug=True
)
cell_params = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
cell_params_spike_injector_with_prefix = {
# imports of both spynnaker and external device plugin.
import spynnaker.pyNN as Frontend
import spynnaker_external_devices_plugin.pyNN as ExternalDevices
# plotter in python
import pylab
import time
import random
from threading import Condition
# boolean allowing users to use python or c vis
using_c_vis = False
# initial call to set up the front end (pynn requirement)
Frontend.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
# neurons per population and the length of runtime in ms for the simulation,
# as well as the expected weight each spike will contain
n_neurons = 100
run_time = 8000
weight_to_spike = 2.0
# neural parameters of the ifcur model used to respond to injected spikes.
# (cell params for a synfire chain)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
def test_script(self):
"""
test that tests the printing of v from a pre determined recording
:return:
"""
p.setup(timestep=0.1, min_delay=1.0, max_delay=14.0)
n_neurons = 128 * 128 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_cond_exp", 256)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0,
'e_rev_E': 0.,
'e_rev_I': -80.
}
populations = list()
projections = list()
weight_to_spike = 0.035
delay = 1.7
spikes = read_spikefile('test.spikes', n_neurons)
print spikes
spike_array = {'spike_times': spikes}
populations.append(
p.Population(n_neurons,
p.SpikeSourceArray,
spike_array,
label='inputSpikes_1'))
populations.append(
p.Population(n_neurons,
p.IF_cond_exp,
cell_params_lif,
label='pop_1'))
projections.append(
p.Projection(
populations[0], populations[1],
p.OneToOneConnector(weights=weight_to_spike, delays=delay)))
populations[1].record()
p.run(100)
spikes = populations[1].getSpikes(compatible_output=True)
if spikes is not None:
print spikes
pylab.figure()
pylab.plot([i[1] for i in spikes], [i[0] for i in spikes], ".")
pylab.xlabel('Time/ms')
pylab.ylabel('spikes')
pylab.title('spikes')
pylab.show()
else:
print "No spikes received"
p.end()
# Set the run time of the execution
run_time = 3300
# Set the time step of the simulation in milliseconds
time_step = 1.0
# Set the number of neurons to simulate
n_fibers = 100
# Set the i_offset current
i_offset = 1.0
# Set the weight of input spikes
weight = 1.0
p.setup(time_step)
# spindle population
spindle_pop = p.Population(n_fibers * 2,
MuscleSpindle, {
"primary": [1] * n_fibers + [0] * n_fibers,
"v_thresh": 100.0,
"receive_port": 12345
},
label="spindle_pop")
spindle_pop.record()
# dynamic fusimotor drive
gamma_dyn = p.Population(1, p.SpikeSourcePoisson, {'rate': 70.0})
p.Projection(gamma_dyn,
model = cer.IFCurrExpSupervision
cell_params = {
'cm': 0.25, # nF
'i_offset': 0.0,
'tau_m': 10.0,
'tau_refrac': 2.0,
'tau_syn_E': 2.5,
'tau_syn_I': 2.5,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -55.4
}
# SpiNNaker setup
ts = 0.5 # does not work at 0.4, 0.6, 0.8, why??
sim.setup(timestep=ts, min_delay=ts, max_delay=15 * ts)
sim_time = 2000.
pre_stim = []
spike_times = []
for t in pylab.arange(0, teaching_time, 2.):
print t
spike_times.append([t, sim_time - ts])
print spike_times, len(spike_times)
pre_stim = sim.Population(len(spike_times), sim.SpikeSourceArray,
{'spike_times': spike_times})
teaching_stim = sim.Population(1, sim.SpikeSourceArray,
{'spike_times': [teaching_time]})
"""
Synfirechain-like example
"""
#!/usr/bin/python
import spynnaker.pyNN as p
#import pyNN.nest as p
import numpy, pylab
p.setup(timestep=1, min_delay=1, max_delay=15)
nNeurons = 1 # number of neurons in each population
nSources = 1 # Number of Poisson sources
neuron_parameters = {'cm' : 0.25, # nF
'i_offset' : 2,
'tau_m' : 10.0,
'tau_refrac': 2.0,
'tau_syn_E' : 0.5,
'tau_syn_I' : 0.5,
'v_reset' : -65.0,
'v_rest' : -65.0,
'v_thresh' : -50.0}
populations = list()
projections = list()
poisson_params = {'rate': 100, 'start':0, 'duration' : 100000000}
poisson_params2 = {'rate': 10, 'start':0, 'duration' : 100000000}
populations.append(p.Population(nNeurons, p.IF_curr_exp, neuron_parameters, label='pop_1'))
populations.append(p.Population(nNeurons, p.IF_curr_exp, neuron_parameters, label='pop_2'))
populations[1].set_constraint(p.PlacerChipAndCoreConstraint(x=1,y=0))#{"x": 1, "y": 0})
# imports of both spynnaker and external device plugin.
import spynnaker.pyNN as Frontend
import spynnaker_external_devices_plugin.pyNN as ExternalDevices
from spynnaker_external_devices_plugin.pyNN.connections.spynnaker_live_spikes_connection import SpynnakerLiveSpikesConnection
from threading import Thread
import time
# plotter in python
import pylab
# initial call to set up the front end (pynn requirement)
Frontend.setup(timestep=0.2, min_delay=0.2, max_delay=2.0)
# neurons per population and the length of runtime in ms for the simulation,
# as well as the expected weight each spike will contain
# n_neurons = 100
run_time = 3000
# weight_to_spike = 2.0
# neural parameters of the ifcur model used to respond to injected spikes.
# (cell params for a synfire chain)
cell_params_inh = {'tau_m': 2.07, 'tau_refrac': 2.0,'tau_syn_E': 2.0, 'tau_syn_I': 2.0, 'v_reset': -84.0}
cell_params_col = {'tau_m': 2.07, 'tau_refrac': 2.0,'tau_syn_E': 2.0, 'tau_syn_I': 2.0, 'v_reset': -90.0}
# create synfire populations (if cur exp)
collector = Frontend.Population(1, Frontend.IF_curr_exp, cell_params_col, label='collector')
inh_left = Frontend.Population(1, Frontend.IF_curr_exp, cell_params_inh, label='inh_left')
inh_right = Frontend.Population(1, Frontend.IF_curr_exp, cell_params_inh, label='inh_right')
# Create injection populations
ret_left = Frontend.Population(1, ExternalDevices.SpikeInjector,{'port':12345}, label='ret_left')
# rets = []
# for x in range(0, 13):
# rets.append(Frontend.Population(1, ExternalDevices.SpikeInjector,{'port':13400+x,}, label='ret_left_'.format(x)))
ret_right = Frontend.Population(1, ExternalDevices.SpikeInjector,{'port':12346}, label='ret_right')
import spynnaker.pyNN as sim
sim.setup(timestep=1.0, min_delay=1.0, max_delay=1.0)
simtime = 1000
pg_pop1 = sim.Population(2, sim.SpikeSourcePoisson,
{'rate': 10.0, 'start':0,
'duration':simtime}, label="pg_pop1")
pg_pop2 = sim.Population(2, sim.SpikeSourcePoisson,
{'rate': 10.0, 'start':0,
'duration':simtime}, label="pg_pop2")
pg_pop1.record()
pg_pop2.record()
sim.run(simtime)
spikes1 = pg_pop1.getSpikes(compatible_output=True)
spikes2 = pg_pop2.getSpikes(compatible_output=True)
print spikes1
print spikes2
sim.end()
def run_test(w_list, cell_para, spike_source_data):
#Du.set_trace()
pop_list = []
p.setup(timestep=1.0, min_delay=1.0, max_delay=3.0)
#input poisson layer
input_size = w_list[0].shape[0]
#print w_list[0].shape[0]
#print w_list[1].shape[0]
list = []
for j in range(input_size):
list.append(spike_source_data[j])
pop_in = p.Population(input_size, p.SpikeSourceArray,
{'spike_times': list})
pop_list.append(pop_in)
#for j in range(input_size):
#pop_in[j].spike_times = spike_source_data[j]
#pop_in = p.Population(input_size, p.SpikeSourceArray, {'spike_times' : []})
#for j in range(input_size):
# pop_in[j].spike_times = spike_source_data[j]
#pop_list.append(pop_in)
#count =0
#print w_list[0].shape[0]
for w in w_list:
input_size = w.shape[0]
#count = count+1
#print count
output_size = w.shape[1]
#pos_w = np.copy(w)
#pos_w[pos_w < 0] = 0
#neg_w = np.copy(w)
#neg_w[neg_w > 0] = 0
conn_list_exci = []
conn_list_inhi = []
#k_size=in_size-out_size+1
for x_ind in range(input_size):
for y_ind in range(output_size):
weights = w[x_ind][y_ind]
#for i in range(w.shape[1]):
if weights > 0:
conn_list_exci.append((x_ind, y_ind, weights, 1.))
elif weights < 0:
conn_list_inhi.append((x_ind, y_ind, weights, 1.))
#print output_size
pop_out = p.Population(output_size, p.IF_curr_exp, cell_para)
if len(conn_list_exci) > 0:
p.Projection(pop_in,
pop_out,
p.FromListConnector(conn_list_exci),
target='excitatory')
if len(conn_list_inhi) > 0:
p.Projection(pop_in,
pop_out,
p.FromListConnector(conn_list_inhi),
target='inhibitory')
#p.Projection(pop_in, pop_out, p.AllToAllConnector(weights = pos_w), target='excitatory')
#p.Projection(pop_in, pop_out, p.AllToAllConnector(weights = neg_w), target='inhibitory')
pop_list.append(pop_out)
pop_in = pop_out
pop_out.record()
run_time = np.ceil(np.max(spike_source_data)[0] / 1000.) * 1000
#print run_time
p.run(run_time)
spikes = pop_out.getSpikes(compatible_output=True)
return spikes
# imports of both spynnaker and external device plugin.
import spynnaker.pyNN as Frontend
import spynnaker_external_devices_plugin.pyNN as ExternalDevices
from spynnaker_external_devices_plugin.pyNN.connections\
.spynnaker_live_spikes_connection import SpynnakerLiveSpikesConnection
# plotter in python
import pylab
# initial call to set up the front end (pynn requirement)
Frontend.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
# neurons per population and the length of runtime in ms for the simulation,
# as well as the expected weight each spike will contain
n_neurons = 100
run_time = 8000
weight_to_spike = 2.0
# neural parameters of the ifcur model used to respond to injected spikes.
# (cell params for a synfire chain)
cell_params_lif = {'cm': 0.25, 'i_offset': 0.0, 'tau_m': 20.0, 'tau_refrac': 2.0,
'tau_syn_E': 5.0, 'tau_syn_I': 5.0, 'v_reset': -70.0, 'v_rest': -65.0,
'v_thresh': -50.0}
# create synfire populations (if cur exp)
pop_forward = Frontend.Population(n_neurons, Frontend.IF_curr_exp,
cell_params_lif, label='pop_forward')
# Create injection populations
injector_forward = Frontend.Population(
n_neurons, ExternalDevices.SpikeInjector,
{'port':12365}, label='spike_injector_forward')
# Create a connection from the injector into the populations
Frontend.Projection(injector_forward, pop_forward,
Frontend.OneToOneConnector(weights=weight_to_spike))
# Synfire chain connections where each neuron is connected to its next neuron
# NOTE: there is no recurrent connection so that each chain stops once it
import spynnaker.pyNN as FrontEnd
import spynnaker_external_devices_plugin.pyNN as ExternalDevices
import pylab
FrontEnd.setup(timestep=1.0)
nNeurons = 100
run_time = 10000
cell_params_lif = {
"cm": 0.25, # nF
"i_offset": 0.0,
"tau_m": 20.0,
"tau_refrac": 2.0,
"tau_syn_E": 5.0,
"tau_syn_I": 5.0,
"v_reset": -70.0,
"v_rest": -65.0,
"v_thresh": -50.0,
}
cell_params_spike_injector_new = {"virtual_key": 0x70800, "port": 12345}
populations = list()
projections = list()
weight_to_spike = 2.0
populations.append(FrontEnd.Population(nNeurons, FrontEnd.IF_curr_exp, cell_params_lif, label="pop_1"))
populations.append(
"""
Synfirechain-like example
"""
#!/usr/bin/python
import spynnaker.pyNN as p
#import pyNN.nest as p
import numpy, pylab
p.setup(timestep=1, min_delay=1, max_delay=15)
nNeurons = 1 # number of neurons in each population
nSources = 1 # Number of Poisson sources
neuron_parameters = {
'cm': 0.25, # nF
'i_offset': 2,
'tau_m': 10.0,
'tau_refrac': 2.0,
'tau_syn_E': 0.5,
'tau_syn_I': 0.5,
'v_reset': -65.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
poisson_params = {'rate': 100, 'start': 0, 'duration': 100000000}
poisson_params2 = {'rate': 10, 'start': 0, 'duration': 100000000}
populations.append(
$ python IF_cond_exp.py <simulator>
where <simulator> is 'neuron', 'nest', etc
Andrew Davison, UNIC, CNRS
May 2006
$Id: IF_cond_exp.py 917 2011-01-31 15:23:34Z apdavison $
"""
from pyNN.utility import get_script_args
from pyNN.errors import RecordingError
import spynnaker.pyNN as p
p.setup(timestep=1.0, min_delay=1.0, max_delay=10.0, db_name='if_cond.sqlite')
cell_params = {
'i_offset': .1,
'tau_refrac': 3.0,
'v_rest': -65.0,
'v_thresh': -51.0,
'tau_syn_E': 2.0,
'tau_syn_I': 5.0,
'v_reset': -70.0
}
ifcell = p.Population(1, p.IF_curr_exp, cell_params, label='IF_curr_exp')
spike_sourceE = p.Population(
1,
def test_get_voltage(self):
"""
test that tests the getting of v from a pre determined recording
:return:
"""
p.setup(timestep=0.1, min_delay=1.0, max_delay=14.40)
n_neurons = 200 # number of neurons in each population
runtime = 500
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 1.7
loop_connections = list()
for i in range(0, n_neurons):
single_connection = (i, ((i + 1) % n_neurons), weight_to_spike,
delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(p.Population(n_neurons, p.IF_curr_exp, cell_params_lif,
label='pop_1'))
populations.append(p.Population(1, p.SpikeSourceArray, spike_array,
label='inputSpikes_1'))
projections.append(p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
populations[0].record_gsyn()
populations[0].record()
p.run(runtime)
v = populations[0].get_v(compatible_output=True)
current_file_path = os.path.dirname(os.path.abspath(__file__))
current_file_path = os.path.join(current_file_path, "v.data")
pre_recorded_data = p.utility_calls.read_in_data_from_file(
current_file_path, 0, n_neurons, 0, runtime)
p.end()
for spike_element, read_element in zip(v, pre_recorded_data):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
self.assertEqual(round(spike_element[2], 1),
round(read_element[2], 1))
def test_inhibitory_connector_memory(self):
p.setup(timestep=0.1, min_delay=1, max_delay=10.0)
weight_to_spike = 10
delay = 1
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 1.0,
'tau_syn_E': 5.0,
'tau_syn_I': 8.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
spike_array = {'spike_times': [0]}
mem_access = {'spike_times': [10]}
p_initial_spike = p.Population(1,
p.SpikeSourceArray,
spike_array,
label="Initial spike pop")
p_mem = p.Population(1, p.IF_curr_exp, cell_params_lif, label="Memory")
p_out = p.Population(1, p.IF_curr_exp, cell_params_lif, label="Output")
p_bridge = p.Population(1,
p.IF_curr_exp,
cell_params_lif,
label="Bridge")
p_inhibitor = p.Population(1,
p.IF_curr_exp,
cell_params_lif,
label="Inhibitor")
p_access = p.Population(1,
p.SpikeSourceArray,
mem_access,
label="Access memory spike pop")
p_out.record()
p_mem.record()
p_inhibitor.record()
p_initial_spike.record()
p_access.record()
pr_initial_spike1 = p.Projection(
p_initial_spike, p_mem,
p.OneToOneConnector(weight_to_spike, delay))
pr_initial_spike2 = p.Projection(
p_initial_spike, p_inhibitor,
p.OneToOneConnector(weight_to_spike, delay))
pr_mem_access = p.Projection(p_access,
p_inhibitor,
p.OneToOneConnector(
weight_to_spike, delay),
target='inhibitory')
pr_inhibitor_self = p.Projection(
p_inhibitor, p_inhibitor,
p.OneToOneConnector(weight_to_spike, delay))
pr_inhibitor_bridge = p.Projection(p_inhibitor,
p_bridge,
p.OneToOneConnector(
weight_to_spike, delay),
target='inhibitory')
pr_mem_self = p.Projection(p_mem, p_mem,
p.OneToOneConnector(weight_to_spike, delay))
pr_mem_bridge = p.Projection(
p_mem, p_bridge, p.OneToOneConnector(weight_to_spike, delay))
pr_bridge_output = p.Projection(
p_bridge, p_out, p.OneToOneConnector(weight_to_spike, delay))
pr_bridge_inhibitor = p.Projection(
p_bridge, p_inhibitor, p.OneToOneConnector(weight_to_spike, delay))
p_mem.record_v()
p_mem.record_gsyn()
p_mem.record()
p.run(30)
v = None
gsyn = None
spikes = None
v = p_mem.get_v(compatible_output=True)
gsyn = p_mem.get_gsyn(compatible_output=True)
spikes = p_mem.getSpikes(compatible_output=True)
if spikes != None:
print spikes
pylab.figure()
pylab.plot([i[1] for i in spikes], [i[0] for i in spikes], ".")
pylab.xlabel('Time/ms')
pylab.ylabel('spikes')
pylab.title('spikes')
pylab.show()
else:
print "No spikes received"
# Make some graphs
ticks = len(v) / 1
if v != None:
pylab.figure()
pylab.xlabel('Time/ms')
pylab.ylabel('v')
pylab.title('v')
for pos in range(0, 1, 20):
v_for_neuron = v[pos * ticks:(pos + 1) * ticks]
pylab.plot([i[1] for i in v_for_neuron],
[i[2] for i in v_for_neuron])
pylab.show()
if gsyn != None:
pylab.figure()
pylab.xlabel('Time/ms')
pylab.ylabel('gsyn')
pylab.title('gsyn')
for pos in range(0, 1, 20):
gsyn_for_neuron = gsyn[pos * ticks:(pos + 1) * ticks]
pylab.plot([i[1] for i in gsyn_for_neuron],
[i[2] for i in gsyn_for_neuron])
pylab.show()
p.end()
"""
Synfirechain-like example
"""
#!/usr/bin/python
import spynnaker.pyNN as p
import numpy, pylab
p.setup(timestep=0.1, min_delay=1.0, max_delay=7.5)
p.set_number_of_neurons_per_core("IF_curr_exp", 100)
nNeurons = 3 # number of neurons in each population
input_cell_params = {
'cm': 0.25, # nF
'i_offset': 5.0,
'tau_m': 10.0,
'tau_refrac': 2.0,
'tau_syn_E': 0.5,
'tau_syn_I': 0.5,
'v_reset': -65.0,
'v_rest': -65.0,
'v_thresh': -64.4
}
'''
cell_params_lif = {'cm' : 0.25, # nF
'i_offset' : 0.0,
'tau_m' : 10.0,
'tau_refrac': 2.0,
'tau_syn_E' : 0.5,
'tau_syn_I' : 0.5,
'v_reset' : -65.0,
def test_get_spikes(self):
"""
test for get spikes
:return:
"""
p.setup(timestep=0.1, min_delay=1.0, max_delay=14.40)
n_neurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", n_neurons / 2)
cell_params_lif = {
'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 1.7
loop_connections = list()
for i in range(0, n_neurons):
single_connection = (i, ((i + 1) % n_neurons), weight_to_spike,
delay)
loop_connections.append(single_connection)
injection_connection = [(0, 0, weight_to_spike, 1)]
spike_array = {'spike_times': [[0]]}
populations.append(
p.Population(n_neurons,
p.IF_curr_exp,
cell_params_lif,
label='pop_1'))
populations.append(
p.Population(1,
p.SpikeSourceArray,
spike_array,
label='inputSpikes_1'))
projections.append(
p.Projection(populations[0], populations[0],
p.FromListConnector(loop_connections)))
projections.append(
p.Projection(populations[1], populations[0],
p.FromListConnector(injection_connection)))
populations[0].record_v()
populations[0].record_gsyn()
populations[0].record()
p.run(500)
spikes = populations[0].getSpikes(compatible_output=True)
pre_recorded_spikes = [[0, 3.5], [1, 6.7], [2, 9.9], [3, 13.1],
[4, 16.3], [5, 19.5], [6, 22.7], [7, 25.9],
[8, 29.1], [9, 32.3], [10, 35.5], [11, 38.7],
[12, 41.9], [13, 45.1], [14, 48.3], [15, 51.5],
[16, 54.7], [17, 57.9], [18, 61.1], [19, 64.3],
[20, 67.5], [21, 70.7], [22, 73.9], [23, 77.1],
[24, 80.3], [25, 83.5], [26, 86.7], [27, 89.9],
[28, 93.1], [29, 96.3], [30, 99.5], [31, 102.7],
[32, 105.9], [33, 109.1], [34, 112.3],
[35, 115.5], [36, 118.7], [37, 121.9],
[38, 125.1], [39, 128.3], [40, 131.5],
[41, 134.7], [42, 137.9], [43, 141.1],
[44, 144.3], [45, 147.5], [46, 150.7],
[47, 153.9], [48, 157.1], [49, 160.3],
[50, 163.5], [51, 166.7], [52, 169.9],
[53, 173.1], [54, 176.3], [55, 179.5],
[56, 182.7], [57, 185.9], [58, 189.1],
[59, 192.3], [60, 195.5]]
p.end()
for spike_element, read_element in zip(spikes, pre_recorded_spikes):
self.assertEqual(round(spike_element[0], 1),
round(read_element[0], 1))
self.assertEqual(round(spike_element[1], 1),
round(read_element[1], 1))
"""
Synfirechain-like example
"""
import spynnaker.pyNN as p
import pylab
p.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
nNeurons = 200 # number of neurons in each population
p.set_number_of_neurons_per_core("IF_curr_exp", nNeurons / 2)
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0
}
populations = list()
projections = list()
weight_to_spike = 2.0
delay = 17
loopConnections = list()
for i in range(0, nNeurons):
singleConnection = (i, ((i + 1) % nNeurons), weight_to_spike, delay)
return build_list(connected_indices)
def Plot_WeightDistribution(weight, bin_num, title):
hist, bins = np.histogram(weight, bins=bin_num)
center = (bins[:-1] + bins[1:]) / 2
width = (bins[1] - bins[0]) * 0.7
plt.bar(center, hist, align='center', width=width)
plt.xlabel('Weight')
plt.title(title)
plt.show()
#Plot_WeightDistribution(weights_import,200,'trained weight')
sim.setup(timestep=1, min_delay=1, max_delay=144)
synapses_to_spike = 1
delay = 2
prepop_size = 256
postpop_size = 40
animation_time = 200
episode = 200
order = np.array([0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3])
test_order = np.array([0, 1, 2, 3])
simtime = len(test_order) * animation_time
def concatenate_time(time, iter):
temp_time = []
spike_time = []
for kk in range(0, iter):
def main():
minutes = 0
seconds = 30
milliseconds = 0
run_time = minutes*60*1000 + seconds*1000 + milliseconds
weight_to_spike = 4.
model = sim.IF_curr_exp
cell_params = {'cm' : 0.25, # nF
'i_offset' : 0.0,
'tau_m' : 10.0,
'tau_refrac': 2.0,
'tau_syn_E' : 2.5,
'tau_syn_I' : 2.5,
'v_reset' : -70.0,
'v_rest' : -65.0,
'v_thresh' : -55.4
}
# Available resolutions
# 16, 32, 64, 128
mode = ExternalDvsEmulatorDevice.MODE_64
cam_res = int(mode)
cam_fps = 90
frames_per_saccade = cam_fps/3 - 1
polarity = ExternalDvsEmulatorDevice.MERGED_POLARITY
output_type = ExternalDvsEmulatorDevice.OUTPUT_TIME
history_weight = 1.0
behaviour = VirtualCam.BEHAVE_ATTENTION
vcam = VirtualCam("./mnist", behaviour=behaviour, fps=cam_fps,
resolution=cam_res, frames_per_saccade=frames_per_saccade)
cam_params = {'mode': mode,
'polarity': polarity,
'threshold': 12,
'adaptive_threshold': False,
'fps': cam_fps,
'inhibition': False,
'output_type': output_type,
'save_spikes': "./spikes_from_cam.pickle",
'history_weight': history_weight,
#'device_id': 0, # for an OpenCV webcam device
#'device_id': 'path/to/video/file', # to encode pre-recorded video
'device_id': vcam,
}
if polarity == ExternalDvsEmulatorDevice.MERGED_POLARITY:
num_neurons = 2*(cam_res**2)
else:
num_neurons = cam_res**2
sim.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
target = sim.Population(num_neurons, model, cell_params)
stimulation = sim.Population(num_neurons, DvsEmulatorDevice, cam_params,
label="Webcam population")
connector = sim.OneToOneConnector(weights=weight_to_spike)
projection = sim.Projection(stimulation, target, connector)
target.record()
sim.run(run_time)
spikes = target.getSpikes(compatible_output=True)
sim.end()
#stimulation._vertex.stop()
print ("Raster plot of the spikes that Spinnaker echoed back")
fig = pylab.figure()
spike_times = [spike_time for (neuron_id, spike_time) in spikes]
spike_ids = [neuron_id for (neuron_id, spike_time) in spikes]
pylab.plot(spike_times, spike_ids, ".", markerfacecolor="None",
markeredgecolor="Blue", markersize=3)
pylab.show()
import spynnaker.pyNN as spynn
import spynnaker_external_devices_plugin.pyNN as ExternalDevices
import sys
import pylab
spynn.setup(timestep=1.0, min_delay=1.0, max_delay=144.0)
print sys.argv
numArgumentsProvided = len(sys.argv) - 1
if numArgumentsProvided == 7:
spikeInjectionPort1 = int(sys.argv[1])
spikeInjectionPopLabel1 = sys.argv[2]
nNeurons1 = int(sys.argv[3])
spikeInjectionPort2 = int(sys.argv[4])
spikeInjectionPopLabel2 = sys.argv[5]
nNeurons2 = int(sys.argv[6])
runTimeMs = int(sys.argv[7])
else:
print 'usage: ', sys.argv[
0], ' <spikeInjectionPort1> <spikeInjectionPopLabel1> <nNeurons1> <spikeInjectionPort2> <spikeInjectionPopLabel2> <nNeurons2> <runTimeMs>'
sys.exit(0)
#nNeurons = 784 # * 8; #MNIST 28 x 28 pixels , 8 neurons each
#runTimeMs = 1000
cell_params_lif = {
'cm': 0.25, # nF
'i_offset': 0.0,
'tau_m': 20.0,
#!/usr/bin/env python
import unittest
from spynnaker.pyNN.exceptions import ConfigurationException
import spynnaker.pyNN as pyNN
from pprint import pprint as pp
if pyNN._spinnaker is None:
pyNN.setup(timestep=1, min_delay=1, max_delay=10.0)
nNeurons = 10
cell_params_lif = {'cm': 0.25,
'i_offset': 0.0,
'tau_m': 20.0,
'tau_refrac': 2.0,
'tau_syn_E': 5.0,
'tau_syn_I': 5.0,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -50.0}
spike_array = {'spike_times': [0]}
class TestingFromListConnector(unittest.TestCase):
def test_generate_synapse_list_simulated_all_to_all(self):
number_of_neurons = 5
first_population = pyNN.Population(number_of_neurons, pyNN.IF_curr_exp,
cell_params_lif, label="One pop")
weight = 2
delay = 1
connection_list = list()
for i in range(5):
for j in range(5):
connection_list.append((i, j, weight, delay))
# Population parameters
model = sim.IF_curr_exp
cell_params = {
'cm': 0.25, # nF
'i_offset': 0.0,
'tau_m': 10.0,
'tau_refrac': 2.0,
'tau_syn_E': 2.5,
'tau_syn_I': 2.5,
'v_reset': -70.0,
'v_rest': -65.0,
'v_thresh': -55.4
}
# SpiNNaker setup
sim.setup(timestep=1.0, min_delay=1.0, max_delay=10.0)
# Sweep times and frequencies
projections = []
sim_time = 0
for t in delta_t:
projections.append([])
for f in frequencies:
# Neuron populations
pre_pop = sim.Population(1, model, cell_params)
post_pop = sim.Population(1, model, cell_params)
# Stimulating populations
pre_times = generate_fixed_frequency_test_data(f, start_time - 1,
num_pairs + 1)
post_times = generate_fixed_frequency_test_data(
