def __init__(self, n=2, **opts):
Topo.__init__(self, **opts)
# set up inet switch
inetSwitch = self.addSwitch('s0')
# add inet host
inetHost = self.addHost('h0')
self.addLink(inetSwitch, inetHost)
# add local nets
for i in irange(1, n):
inetIntf = 'nat%d-eth0' % i
localIntf = 'nat%d-eth1' % i
localIP = '192.168.%d.1' % i
localSubnet = '192.168.%d.0/24' % i
natParams = {'ip': '%s/24' % localIP}
# add NAT to topology
nat = self.addNode('nat%d' % i,
cls=NAT,
subnet=localSubnet,
inetIntf=inetIntf,
localIntf=localIntf)
switch = self.addSwitch('s%d' % i)
# connect NAT to inet and local switches
self.addLink(nat, inetSwitch, intfName1=inetIntf)
self.addLink(nat, switch, intfName1=localIntf, params1=natParams)
# add host and connect to local switch
host = self.addHost('h%d' % i,
ip='192.168.%d.100/24' % i,
defaultRoute='via %s' % localIP)
self.addLink(host, switch)
def __init__(self, hosts=2, bwlimit=10, lat=0.1, **opts):
Topo.__init__(self, **opts)
tor = []
numLeafes = hosts
bw = bwlimit
s = 1
#bw = 10
for i in range(numLeafes):
h = self.addHost('h' + str(i + 1),
mac=self.makeMAC(i),
ip="10.0.0." + str(i + 1))
sw = self.addSwitch('s' + str(s),
dpid=self.makeDPID(s),
**dict(listenPort=(13000 + s - 1)))
s = s + 1
self.addLink(h, sw, bw=bw, delay=str(lat) + "ms")
tor.append(sw)
toDo = tor # nodes that have to be integrated into the tree
while len(toDo) > 1:
newToDo = []
for i in range(0, len(toDo), 2):
sw = self.addSwitch('s' + str(s),
dpid=self.makeDPID(s),
**dict(listenPort=(13000 + s - 1)))
s = s + 1
newToDo.append(sw)
self.addLink(toDo[i], sw, bw=bw, delay=str(lat) + "ms")
if len(toDo) > (i + 1):
self.addLink(toDo[i + 1], sw, bw=bw, delay=str(lat) + "ms")
toDo = newToDo
bw = 2.0 * bw
def __init__(self, n, **kwargs):
Topo.__init__(self, **kwargs)
h1, h2 = self.addHost('h1'), self.addHost('h2')
s1 = self.addSwitch('s1')
for _ in range(n):
self.addLink(s1, h1)
self.addLink(s1, h2)
def __init__(self, n=2, hopts=None, lopts=None):
if not hopts:
hopts = {}
if not lopts:
lopts = {}
Topo.__init__(self, hopts=hopts, lopts=lopts)
switch = self.addSwitch('s1')
for h in range(n):
host = self.addHost('h%s' % (h + 1))
self.addLink(host, switch)
def __init__(self, n, dataController=DataController, **kwargs):
"""n: number of data network controller nodes
dataController: class for data network controllers"""
Topo.__init__(self, **kwargs)
# Connect everything to a single switch
cs0 = self.addSwitch('cs0')
# Add hosts which will serve as data network controllers
for i in range(0, n):
c = self.addHost('c%s' % i, cls=dataController, inNamespace=True)
self.addLink(c, cs0)
# Connect switch to root namespace so that data network
# switches will be able to talk to us
root = self.addHost('root', inNamespace=False)
self.addLink(root, cs0)
def __init__(self):
"Create custom topo."
# Initialize topology
Topo.__init__(self)
# Add hosts and switches
leftHost = self.addHost('h1')
rightHost = self.addHost('h2')
leftSwitch = self.addSwitch('s3')
rightSwitch = self.addSwitch('s4')
# Add links
self.addLink(leftHost, leftSwitch)
self.addLink(leftSwitch, rightSwitch)
self.addLink(rightSwitch, rightHost)
def testActualDpidAssignment(self):
"""Verify that Switch dpid is the actual dpid assigned if dpid is
passed in switch creation."""
dpid = self.dpidFrom(0xABCD)
switch = Mininet(Topo(), self.switchClass, Host,
Controller).addSwitch('s1', dpid=dpid)
self.assertEqual(switch.dpid, dpid)
def addLink(self, node1, node2, port1=None, port2=None, key=None, **opts):
if isinstance(node1, VirtualInstance):
node1 = node1.getSwitch()
if isinstance(node2, VirtualInstance):
node2 = node2.getSwitch()
return Topo.addLink(self, node1, node2, port1, port2, key, **opts)
def testDefaultDpidLen(self):
"""Verify that Default dpid length is 16 characters consisting of
16 - len(hex of first string of contiguous digits passed in switch
name) 0's followed by hex of first string of contiguous digits passed
in switch name."""
switch = Mininet(Topo(), self.switchClass, Host,
Controller).addSwitch('s123')
self.assertEqual(switch.dpid, self.dpidFrom(123))
def testDefaultDpidAssignmentFailure(self):
"""Verify that Default dpid assignment raises an Exception if the
name of the switch does not contin a digit. Also verify the
exception message."""
with self.assertRaises(Exception) as raises_cm:
Mininet(Topo(), self.switchClass, Host, Controller).addSwitch('A')
self.assertEqual(
raises_cm.exception.message, 'Unable to derive '
'default datapath ID - please either specify a dpid '
'or use a canonical switch name such as s23.')
def __init__(self, N, **params):
# Initialize topology
Topo.__init__(self, **params)
# Create switches and hosts
hosts = [self.addHost('h%s' % h) for h in irange(1, N)]
switches = [self.addSwitch('s%s' % s) for s in irange(1, N - 1)]
# Wire up switches
last = None
for switch in switches:
if last:
self.addLink(last, switch)
last = switch
# Wire up hosts
self.addLink(hosts[0], switches[0])
for host, switch in zip(hosts[1:], switches):
self.addLink(host, switch)
def __init__(self, n=2, lossy=True, **opts):
Topo.__init__(self, **opts)
switch = self.addSwitch('s1')
for h in range(n):
# Each host gets 50%/n of system CPU
host = self.addHost('h%s' % (h + 1), cpu=.5 / n)
if lossy:
# 10 Mbps, 5ms delay, 10% packet loss
self.addLink(host,
switch,
bw=10,
delay='5ms',
loss=10,
use_htb=True)
else:
# 10 Mbps, 5ms delay, no packet loss
self.addLink(host,
switch,
bw=10,
delay='5ms',
loss=0,
use_htb=True)
def _parse_metis_result(self, filepath, n):
for i in range(0, n):
self.partitions.append(Topo())
f = open(filepath, "r")
i = 1
switch_to_part = {}
for line in f:
part = int(line)
switch_to_part[self.pos[i]] = part
self.partitions[part].addNode(self.pos[i],
**self.topo.nodeInfo(self.pos[i]))
i = i + 1
f.close()
self._add_links(switch_to_part)
def partition_using_map(self, mapping):
"""
Partition loaded topology without metis but with mapping dictionary.
Dictionary has to contain reference "nodename"->workerid for every
node in topology.
"""
self.tunnels = []
self.partitions = []
for i in range(0, max(mapping.values()) + 1):
self.partitions.append(Topo())
print mapping
switch_to_part = {}
for switch in self.switches:
if (not switch in mapping):
raise RuntimeError("no mapping for " + switch + " found")
switch_to_part[switch] = mapping[switch]
self.partitions[mapping[switch]].addNode(
switch, **self.topo.nodeInfo(switch))
self._add_links(switch_to_part)
return Clustering(self.partitions, self.tunnels)
def partition(self, n, shares=None):
"""Partition loaded topology into n partitions.
Args:
n: Number of partitions to create
shares: list of workload shares for each partition. Must add up to 1
"""
self.tunnels = []
self.partitions = []
if (n > 1 and len(self.switches) > 1):
if (shares):
tpw = ""
for i in range(0, n):
tpw += str(i) + " = " + str(shares[i]) + "\n"
tpwf = self._write_to_file(tpw)
outp = subprocess.check_output([
self.metisCMD + " -tpwgts=" + tpwf + " " + self.graph +
" " + str(n)
],
shell=True)
os.remove(tpwf)
else:
outp = subprocess.check_output(
[self.metisCMD + " " + self.graph + " " + str(n)],
shell=True)
self.logger.debug(outp)
self._parse_metis_result(self.graph + ".part." + str(n), n)
os.remove(self.graph + ".part." + str(n))
os.remove(self.graph)
else:
tpart = [self._convert_to_plain_topo(self.topo)]
while (len(tpart) < n):
tpart.append(Topo())
self.partitions = tpart
return Clustering(self.partitions, self.tunnels)
def _convert_to_plain_topo(self, topo):
"""Convert topo to mininet.topo.Topo instance.
This helper function allows the user to use topologys which are not
direct instances of mininet.topo.Topo in MaxiNet. If the topology was
not converted to a Topo instance the transfer via pyro most likely
fails as the original class might not be available at the pyro remote.
Args:
topo: Instance which fullfills the interface of mininet.topo.Topo.
Returns:
Instance of mininet.topo.Topo,
"""
r = Topo()
for node in topo.nodes():
r.addNode(node, **topo.nodeInfo(node))
for edge in topo.links():
r.addLink(**topo.linkInfo(edge[0], edge[1]))
return r
# between a switch and a host if these are emulated at DIFFERENT workers
# This limitation does (of course) NOT hold for links between switches.
#
# Dynamic adding and removing of nodes also does not work when using the
# UserSwitch.
import time
from src.mininet.topo import Topo
from src.mininet.node import OVSSwitch
from src.maxinet.Frontend import maxinet_main
from src.maxinet.tools import Tools
# create topology
topo = Topo()
topo.addHost("h1", ip=Tools.makeIP(1), mac=Tools.makeMAC(1))
topo.addHost("h2", ip=Tools.makeIP(2), mac=Tools.makeMAC(2))
topo.addSwitch("s1", dpid=Tools.makeDPID(1))
topo.addLink("h1", "s1")
topo.addLink("h2", "s1")
# start cluster
cluster = maxinet_main.Cluster(minWorkers=2, maxWorkers=2)
# start experiment with OVSSwitch on cluster
exp = maxinet_main.Experiment(cluster, topo, switch=OVSSwitch)
exp.setup()
print "waiting 5 seconds for routing algorithms on the controller to converge"
time.sleep(5)
def testDefaultDpid(self):
"""Verify that the default dpid is assigned using a valid provided
canonical switchname if no dpid is passed in switch creation."""
switch = Mininet(Topo(), self.switchClass, Host,
Controller).addSwitch('s1')
self.assertEqual(switch.defaultDpid(), switch.dpid)
#!/usr/bin/env python2
""" An example showing all available methods and attributes of the NodeWrapper for Docker hosts.
"""
from src.maxinet.Frontend import maxinet_main
from src.maxinet.Frontend.container import Docker
from src.mininet.topo import Topo
from src.mininet.node import OVSSwitch
topo = Topo()
d1 = topo.addHost("d1", cls=Docker, ip="10.0.0.251", dimage="ubuntu:trusty")
cluster = maxinet_main.Cluster()
exp = maxinet_main.Experiment(cluster, topo, switch=OVSSwitch)
exp.setup()
try:
node_wrapper = exp.get_node("d1")
print("Testing methods:")
print("=================")
print("updateCpuLimit():")
print("\t" + str(node_wrapper.updateCpuLimit(
10000, 10000, 1, "0-1"))) # cpu_quota, cpu_period, cpu_shares, cores
print("updateMemoryLimit():")
print("\t" + str(node_wrapper.updateMemoryLimit(300000)))
print("cgroupGet():")
print("\t" + str(node_wrapper.cgroupGet('cpus', resource='cpuset')))
#!/usr/bin/env python2
""" An example showing all available methods and attributes of the NodeWrapper for Docker hosts.
"""
from src.maxinet.Frontend import maxinet_main
from src.maxinet.Frontend.libvirt import LibvirtHost
from src.mininet.topo import Topo
from src.mininet.node import OVSSwitch
topo = Topo()
vm1 = topo.addHost("vm1",
cls=LibvirtHost,
ip="10.0.0.251",
disk_image="/srv/images/ubuntu16.04.qcow2")
cluster = maxinet_main.Cluster()
exp = maxinet_main.Experiment(cluster, topo, switch=OVSSwitch)
exp.setup()
try:
node_wrapper = exp.get_node("vm1")
print("Testing methods:")
print("=================")
print("updateCpuLimit():")
print("\t" +
str(node_wrapper.updateCpuLimit(10000, 10000, 1, {
0: "1",
1: "0"
}))) # cpu_quota, cpu_period, cpu_shares, cores
def __init__(self, *args, **kwargs):
Topo.__init__(self, *args, **kwargs)
self.res_table = ResourcesTable()
FOG_NODES = ["f{}".format(x + 1) for x in range(3)]
SENSOR_NODES = [
"h{}".format(x + 1) for x in range(SENSORS_PER_FOG * len(FOG_NODES))
]
fogs = []
sensors = []
MANAGER_ADDR = '10.0.0.1:2000'
MANAGER_ENV = {
"CLOUDS": 1,
"FOGS": len(FOG_NODES),
"SENSORS_PER_FOG": SENSORS_PER_FOG
}
topo = Topo()
switch_idx = 1
info('**** Adding Manager\n')
mngr = topo.addDocker('m1',
ip=MANAGER_ADDR.split(':')[0],
dimage="manager:latest",
environment=MANAGER_ENV)
sw_mngr = topo.addSwitch('s%d' % switch_idx)
switch_idx += 1
topo.addLink(mngr, sw_mngr)
info('*** Adding docker containers\n')
info('*** Cloud\n')
c1 = topo.addDocker('c1',
ip='10.0.0.2',
def get_attribute(node, attribute):
print(node.nn + "." + attribute)
ok = False
try:
print("\t->" + str(node._get(attribute)))
ok = True
except Exception as e:
print("\tFAILED")
traceback.print_exc()
if ok:
print("\tOKAY")
print
topo = Topo()
topo.addHost("h1", cls=CPULimitedHost, ip="10.0.0.251")
topo.addHost("h2", cls=CPULimitedHost, ip="10.0.0.252")
topo.addSwitch("s1")
topo.addLink("h1", "s1")
topo.addLink("h2", "s1")
cluster = maxinet_main.Cluster()
exp = maxinet_main.Experiment(cluster, topo, switch=OVSSwitch)
exp.setup()
h1 = exp.get_node("h1")
h2 = exp.get_node("h2")
s1 = exp.get_node("s1")
print(
