示例#1
0
def run():
    counter = 0
    total_counter = 0
    os_counter = 0
    filename_counter = 0
    job_counter = 0
    encode_counter = 0
    for argv_check in sys.argv:
        if argv_check == '-os':
            counter += 1
            os_counter = total_counter + 1
        if argv_check == '-o':
            counter += 1
            filename_counter = total_counter + 1
        if argv_check == '-job':
            counter += 1
            job_counter = total_counter + 1
        if argv_check == '-encode':
            counter += 1
            encode_counter = total_counter + 1
        total_counter += 1
    if counter is 4:
        checkargv = True
    if checkargv is False:
        start.inputcheck()
    checkargv = False
    if start.oslist(sys.argv[os_counter]) is not True:
        return checkargv
    if start.types(sys.argv[encode_counter]) is not True:
        return checkargv
    if start.joblist(sys.argv[job_counter]) is not True:
        return checkargv
    try:
        writer = open(sys.argv[filename_counter], 'w')
        writer.write('')
        writer.close()
    except:
        print color.color(
            'red'
        ) + 'File is not writable, Try other name or change directory' + color.color(
            'reset')
        sys.exit(start.sig())
    os = sys.argv[os_counter]
    filename = sys.argv[filename_counter]
    encode = sys.argv[encode_counter]
    job = sys.argv[job_counter]
    content = os + '\x90\x90\x90' + filename + '\x90\x90\x90' + encode + '\x90\x90\x90' + job
    return content
示例#2
0
def run():
	counter = 0
	total_counter = 0
	os_counter = 0
	filename_counter = 0
	job_counter = 0
	encode_counter = 0
	for argv_check in sys.argv:
		if argv_check == '-os':
			counter += 1
			os_counter = total_counter + 1
		if argv_check == '-o':
			counter += 1
			filename_counter = total_counter + 1
		if argv_check == '-job':
			counter += 1
			job_counter = total_counter + 1
		if argv_check == '-encode':
			counter += 1
			encode_counter = total_counter + 1
		total_counter += 1
	if counter is 4:
		checkargv = True
	if checkargv is False:
		start.inputcheck()
	checkargv = False
	if start.oslist(sys.argv[os_counter]) is not True:
		return checkargv
	if start.types(sys.argv[encode_counter]) is not True:
		return checkargv
	if start.joblist(sys.argv[job_counter]) is not True:
		return checkargv
	try:
		writer = open(sys.argv[filename_counter],'w')
		writer.write('')
		writer.close()
	except:
		print color.color('red')+'File is not writable, Try other name or change directory'+color.color('reset')
		sys.exit(start.sig())
	os = sys.argv[os_counter]
	filename = sys.argv[filename_counter]
	encode = sys.argv[encode_counter]
	job = sys.argv[job_counter]
	content = os + '\x90\x90\x90' + filename + '\x90\x90\x90' + encode + '\x90\x90\x90' + job
	return content
示例#3
0
def check():
	checkargv = False
	if len(sys.argv) is 2:
		if str(sys.argv[1]) == '-oslist':
			checkargv = True
			start.oslist(1)
		if str(sys.argv[1]) == '-joblist':
			checkargv = True
			start.joblist(1)
		if str(sys.argv[1]) == '-types':
			checkargv = True
			start.types(1)
		if str(sys.argv[1]) == '-h':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '--h':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '-help':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '--help':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '-update':
			checkargv = True
			start.update()
		if str(sys.argv[1]) == '-about':
			checkargv = True
			start.about()
		if str(sys.argv[1]) == '-wizard':
			checkargv = True
			start.zcr()
			os = raw_input(color.color('cyan')+'OS Name: '+color.color('white')).replace('\n','')
			filename = raw_input(color.color('cyan')+'Filename: '+color.color('white')).replace('\n','')
			encode = raw_input(color.color('cyan')+'encode:'+color.color('white')).replace('\n','')
			job = raw_input(color.color('cyan')+'job:'+color.color('white')).replace('\n','')
			content = os + '\x90\x90\x90' + filename + '\x90\x90\x90' + encode + '\x90\x90\x90' + job
			analyser.do(content)
			start.sig()
			sys.exit(0)
		if checkargv is False:
			start.inputcheck()
		return checkargv
	if len(sys.argv) > 2:
		checkargv = True
		for argv_check in sys.argv:
			if argv_check == '-h':
				checkargv = False
			if argv_check == '--h':
				checkargv = False
			if argv_check == '-help':
				checkargv = False
			if argv_check == '--help':
				checkargv = False
			if argv_check == '-types':
				checkargv = False
			if argv_check == '-oslist':
				checkargv = False
			if argv_check == '-joblist':
				checkargv = False
			if argv_check == '-update':
				checkargv = False
			if argv_check == '-wizard':
				checkargv = False
		if checkargv is False:
			start.inputcheck()
		checkargv = False
		counter = 0
		total_counter = 0
		os_counter = 0
		filename_counter = 0
		job_counter = 0
		encode_counter = 0
		for argv_check in sys.argv:
			if argv_check == '-os':
				counter += 1
				os_counter = total_counter + 1
			if argv_check == '-o':
				counter += 1
				filename_counter = total_counter + 1
			if argv_check == '-job':
				counter += 1
				job_counter = total_counter + 1
			if argv_check == '-encode':
				counter += 1
				encode_counter = total_counter + 1
			total_counter += 1
		if counter is 4:
			checkargv = True
		if checkargv is False:
			start.inputcheck()
		checkargv = False
		if start.oslist(sys.argv[os_counter]) is not True:
			return checkargv
		if start.types(sys.argv[encode_counter]) is not True:
			return checkargv
		if start.joblist(sys.argv[job_counter]) is not True:
			return checkargv
		checkargv = True
		return checkargv
示例#4
0
def check():
	checkargv = False
	if len(sys.argv) is 2:
		if str(sys.argv[1]) == '-oslist':
			checkargv = True
			start.oslist(1)
		if str(sys.argv[1]) == '-joblist':
			checkargv = True
			start.joblist(1)
		if str(sys.argv[1]) == '-types':
			checkargv = True
			start.types(1)
		if str(sys.argv[1]) == '-h':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '--h':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '-help':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '--help':
			checkargv = True
			start.menu()
		if str(sys.argv[1]) == '-update':
			checkargv = True
			start.update()
		if str(sys.argv[1]) == '-about':
			checkargv = True
			start.about()
		if str(sys.argv[1]) == '-wizard':
			checkargv = True
			start.zcr()
			try:
				t = True
				print '\n'+color.color('yellow')+'Default OS Name is linux_x86, Enter OS Name or Enter "list" to see OS List'
				while t:
					osname = raw_input(color.color('cyan')+'OS Name: '+color.color('white')).replace('\n','')
					if osname == '':
						osname = 'linux_x86'
					check = start.oslist(osname)
					if osname == 'list':
						start.os_names_list()
						check = 1
					if check is True:
						print color.color('blue')+'OS Name set to "%s%s%s"'%(color.color('red'),osname,color.color('blue'))
						t = False
					if check is not True and check is not 1:
						print color.color('red')+'Wrong Input'	
				t = True
				print '\n'+color.color('yellow')+'Default Job is exec(\'/bin/bash\'), Enter Job Type or Enter "list" to see Jobs List'
				while t:
					job = raw_input(color.color('cyan')+'Job:'+color.color('white')).replace('\n','')
					if job == '':
						job = 'exec(\'/bin/bash\')'
					check = start.job_check(job)
					if job == 'list':
						start.job_list()
						check = 1
					if check is True:
						print color.color('blue')+'Job set to "%s%s%s"'%(color.color('red'),job,color.color('blue'))
						t = False
					if check is not True and check is not 1:
						print color.color('red')+'Wrong Input'
				t = True
				print '\n'+color.color('yellow')+'Default Encode Type is none, Enter Encode Type or Enter "list" to see Encodes List'
				while t:
					encode = raw_input(color.color('cyan')+'Encode:'+color.color('white')).replace('\n','')
					if encode == '':
						encode = 'none'
					check = start.encode_name_check(encode)
					if encode == 'list':
						start.encode_name()
						check = 1
					if check is True:
						print color.color('blue')+'Encode Type set to "%s%s%s"'%(color.color('red'),encode,color.color('blue'))
						t = False
					if check is not True and check is not 1:
						print color.color('red')+'Wrong Input'
				t = True
				print '\n'+color.color('yellow')+'Default Filename is shellcode.c, Enter Filename or Just Enter to skip'
				while t:
					filename = raw_input(color.color('cyan')+'Filename: '+color.color('white')).replace('\n','')
					if filename == '':
						filename = 'shellcode.c'
					check = False
					try:
						file = open(filename,'w')
						file.write('')
						file.close()
						check = True
					except:
						check = False
					if check is True:
						print color.color('blue')+'Filename set to "%s%s%s"'%(color.color('red'),filename,color.color('blue'))
						t = False
					if check is False:
						print color.color('red')+'File is not writable, Try other name or change directory'
			except (KeyboardInterrupt, SystemExit):
				sys.exit('\n\nAborted by user.\n')
			except:
				sys.exit('\n\nAborted by user.\n')
			checkargv = True
			if start.oslist(osname) is not True:
				checkargv = False
			if start.types(encode) is not True:
				checkargv = False
			if start.joblist(job) is not True:
				checkargv = False
			if checkargv is False:
				start.inputcheck()
			content = osname + '\x90\x90\x90' + filename + '\x90\x90\x90' + encode + '\x90\x90\x90' + job
			analyser.do(content)
			sys.exit(start.sig())
		if checkargv is False:
			start.inputcheck()
		return checkargv
	if len(sys.argv) > 2:
		checkargv = True
		for argv_check in sys.argv:
			if argv_check == '-h':
				checkargv = False
			if argv_check == '--h':
				checkargv = False
			if argv_check == '-help':
				checkargv = False
			if argv_check == '--help':
				checkargv = False
			if argv_check == '-types':
				checkargv = False
			if argv_check == '-oslist':
				checkargv = False
			if argv_check == '-joblist':
				checkargv = False
			if argv_check == '-update':
				checkargv = False
			if argv_check == '-wizard':
				checkargv = False
		if checkargv is False:
			start.inputcheck()
		checkargv = False
		counter = 0
		total_counter = 0
		os_counter = 0
		filename_counter = 0
		job_counter = 0
		encode_counter = 0
		for argv_check in sys.argv:
			if argv_check == '-os':
				counter += 1
				os_counter = total_counter + 1
			if argv_check == '-o':
				counter += 1
				filename_counter = total_counter + 1
			if argv_check == '-job':
				counter += 1
				job_counter = total_counter + 1
			if argv_check == '-encode':
				counter += 1
				encode_counter = total_counter + 1
			total_counter += 1
		if counter is 4:
			checkargv = True
		if checkargv is False:
			start.inputcheck()
		checkargv = False
		if start.oslist(sys.argv[os_counter]) is not True:
			return checkargv
		if start.types(sys.argv[encode_counter]) is not True:
			return checkargv
		if start.joblist(sys.argv[job_counter]) is not True:
			return checkargv
		checkargv = True
		return checkargv
示例#5
0
def check():
    checkargv = False
    if len(sys.argv) is 2:
        if str(sys.argv[1]) == '-oslist':
            checkargv = True
            start.oslist(1)
        if str(sys.argv[1]) == '-joblist':
            checkargv = True
            start.joblist(1)
        if str(sys.argv[1]) == '-types':
            checkargv = True
            start.types(1)
        if str(sys.argv[1]) == '-h':
            checkargv = True
            start.menu()
        if str(sys.argv[1]) == '--h':
            checkargv = True
            start.menu()
        if str(sys.argv[1]) == '-help':
            checkargv = True
            start.menu()
        if str(sys.argv[1]) == '--help':
            checkargv = True
            start.menu()
        if str(sys.argv[1]) == '-update':
            checkargv = True
            start.update()
        if str(sys.argv[1]) == '-about':
            checkargv = True
            start.about()
        if str(sys.argv[1]) == '-wizard':
            checkargv = True
            start.zcr()
            try:
                t = True
                print '\n' + color.color(
                    'yellow'
                ) + 'Default OS Name is linux_x86, Enter OS Name or Enter "list" to see OS List'
                while t:
                    osname = raw_input(
                        color.color('cyan') + 'OS Name: ' +
                        color.color('white')).replace('\n', '')
                    if osname == '':
                        osname = 'linux_x86'
                    check = start.oslist(osname)
                    if osname == 'list':
                        start.os_names_list()
                        check = 1
                    if check is True:
                        print color.color(
                            'blue') + 'OS Name set to "%s%s%s"' % (color.color(
                                'red'), osname, color.color('blue'))
                        t = False
                    if check is not True and check is not 1:
                        print color.color('red') + 'Wrong Input'
                t = True
                print '\n' + color.color(
                    'yellow'
                ) + 'Default Job is exec(\'/bin/bash\'), Enter Job Type or Enter "list" to see Jobs List'
                while t:
                    job = raw_input(
                        color.color('cyan') + 'Job:' +
                        color.color('white')).replace('\n', '')
                    if job == '':
                        job = 'exec(\'/bin/bash\')'
                    check = start.job_check(job)
                    if job == 'list':
                        start.job_list()
                        check = 1
                    if check is True:
                        print color.color('blue') + 'Job set to "%s%s%s"' % (
                            color.color('red'), job, color.color('blue'))
                        t = False
                    if check is not True and check is not 1:
                        print color.color('red') + 'Wrong Input'
                t = True
                print '\n' + color.color(
                    'yellow'
                ) + 'Default Encode Type is none, Enter Encode Type or Enter "list" to see Encodes List'
                while t:
                    encode = raw_input(
                        color.color('cyan') + 'Encode:' +
                        color.color('white')).replace('\n', '')
                    if encode == '':
                        encode = 'none'
                    check = start.encode_name_check(encode)
                    if encode == 'list':
                        start.encode_name()
                        check = 1
                    if check is True:
                        print color.color(
                            'blue') + 'Encode Type set to "%s%s%s"' % (
                                color.color('red'), encode,
                                color.color('blue'))
                        t = False
                    if check is not True and check is not 1:
                        print color.color('red') + 'Wrong Input'
                t = True
                print '\n' + color.color(
                    'yellow'
                ) + 'Default Filename is shellcode.c, Enter Filename or Just Enter to skip'
                while t:
                    filename = raw_input(
                        color.color('cyan') + 'Filename: ' +
                        color.color('white')).replace('\n', '')
                    if filename == '':
                        filename = 'shellcode.c'
                    check = False
                    try:
                        file = open(filename, 'w')
                        file.write('')
                        file.close()
                        check = True
                    except:
                        check = False
                    if check is True:
                        print color.color(
                            'blue') + 'Filename set to "%s%s%s"' % (
                                color.color('red'), filename,
                                color.color('blue'))
                        t = False
                    if check is False:
                        print color.color(
                            'red'
                        ) + 'File is not writable, Try other name or change directory'
            except (KeyboardInterrupt, SystemExit):
                sys.exit('\n\nAborted by user.\n')
            except:
                sys.exit('\n\nAborted by user.\n')
            checkargv = True
            if start.oslist(osname) is not True:
                checkargv = False
            if start.types(encode) is not True:
                checkargv = False
            if start.joblist(job) is not True:
                checkargv = False
            if checkargv is False:
                start.inputcheck()
            content = osname + '\x90\x90\x90' + filename + '\x90\x90\x90' + encode + '\x90\x90\x90' + job
            analyser.do(content)
            sys.exit(start.sig())
        if checkargv is False:
            start.inputcheck()
        return checkargv
    if len(sys.argv) > 2:
        checkargv = True
        for argv_check in sys.argv:
            if argv_check == '-h':
                checkargv = False
            if argv_check == '--h':
                checkargv = False
            if argv_check == '-help':
                checkargv = False
            if argv_check == '--help':
                checkargv = False
            if argv_check == '-types':
                checkargv = False
            if argv_check == '-oslist':
                checkargv = False
            if argv_check == '-joblist':
                checkargv = False
            if argv_check == '-update':
                checkargv = False
            if argv_check == '-wizard':
                checkargv = False
        if checkargv is False:
            start.inputcheck()
        checkargv = False
        counter = 0
        total_counter = 0
        os_counter = 0
        filename_counter = 0
        job_counter = 0
        encode_counter = 0
        for argv_check in sys.argv:
            if argv_check == '-os':
                counter += 1
                os_counter = total_counter + 1
            if argv_check == '-o':
                counter += 1
                filename_counter = total_counter + 1
            if argv_check == '-job':
                counter += 1
                job_counter = total_counter + 1
            if argv_check == '-encode':
                counter += 1
                encode_counter = total_counter + 1
            total_counter += 1
        if counter is 4:
            checkargv = True
        if checkargv is False:
            start.inputcheck()
        checkargv = False
        if start.oslist(sys.argv[os_counter]) is not True:
            return checkargv
        if start.types(sys.argv[encode_counter]) is not True:
            return checkargv
        if start.joblist(sys.argv[job_counter]) is not True:
            return checkargv
        checkargv = True
        return checkargv