def num_above_noise(signal, noise_top):
begin_above = None
for i, hm in enumerate(signal):
noise_top_extra = stft.db2amplitude(
stft.amplitude2db(noise_top)
+ defs.HARMONIC_DB_ABOVE_NOISE_TOP)
if hm < noise_top_extra:
begin_above = i
break
return begin_above
def estimate_f0_B(filenames):
### ASSUME: all filenames are of the same instrument-string
wav_filename = filenames[0]
basename='-'.join(os.path.basename(wav_filename).split('-')[0:3])
if basename.startswith("test-440f"):
return 440.0, 0, 1, 1, 1, 1
### get initial f0 estimate
base_frequency_estimate = expected_frequencies.get_freq_from_filename(
wav_filename)
### get noise
initial_noise_floor, initial_noise_freqs, _, _, _ = calc_noise.get_noise(wav_filename)
noise_cutoff = stft.db2amplitude(
stft.amplitude2db(initial_noise_floor)+defs.B_MINIMUM_HARMONIC_SNR)
#### get FFT frames from audio files
sample_rate = None
freqs = None
estimate_B_buffers_list = []
for wav_i, wav_filename in enumerate(filenames):
#print wav_filename
#window_buffer, sample_rate = stft.get_long_buffer_from_file(wav_filename,
window_buffers, sample_rate = stft.get_buffers_from_file(wav_filename,
(defs.B_NUM_BUFFERS_ESTIMATE))
if freqs is None:
freqs = [ stft.bin2hertz(i, sample_rate)
for i in range(stft.WINDOWSIZE/2+1) ]
estimate_B_buffers_this_list = []
#fft_amplitude = stft.fft_amplitude(window_buffer, sample_rate)
#estimate_B_buffers_this_list.append(fft_amplitude)
for window_number in range(defs.B_NUM_BUFFERS_ESTIMATE):
window_buffer = window_buffers[window_number]
fft_amplitude = stft.stft_amplitude(window_buffer)
estimate_B_buffers_this_list.append(fft_amplitude)
estimate_B_buffers_list.extend(estimate_B_buffers_this_list)
estimate_B_buffers = numpy.array(estimate_B_buffers_list)
### radius of search area for peaks
# used with STFT only
bin_initial_estimate = stft.hertz2bin(base_frequency_estimate,
sample_rate)
#bin_initial_estimate = (base_frequency_estimate
# * fft_amplitude.shape[0] / (sample_rate/2)
# )
#print bin_initial_estimate
bin_spread_below = int(math.ceil(abs(
stft.hertz2bin(
(1.0-defs.B_PEAK_SPREAD_BELOW_HERTZ)*base_frequency_estimate,
sample_rate) - bin_initial_estimate)))
bin_spread_above = int(math.ceil(
stft.hertz2bin(
(1.0+defs.B_PEAK_SPREAD_ABOVE_HERTZ)*base_frequency_estimate,
sample_rate) - bin_initial_estimate))
#bin_spread_below = int(round(bin_initial_estimate *
# defs.B_PEAK_SPREAD_BELOW_HERTZ))
#bin_spread_above = int(round(bin_initial_estimate *
# defs.B_PEAK_SPREAD_BELOW_HERTZ))
#bin_spread_below_main = int(
# stft.hertz2bin(defs.STFT_PEAK_SPREAD_BELOW_HERTZ*base_frequency_estimate,
# sample_rate))
#bin_spread_above_main = int(
# stft.hertz2bin(defs.STFT_PEAK_SPREAD_ABOVE_HERTZ*base_frequency_estimate,
# sample_rate))
### actual estimate
bin_f0, B, rsquared, harmonics, limit = get_bin_f0_B(
bin_initial_estimate,
estimate_B_buffers, noise_cutoff,
#estimate_B_buffers, numpy.zeros(defs.LONG_WINDOWSIZE+1),
bin_spread_below, bin_spread_above, sample_rate)
highest_harmonic = 0
for h in harmonics:
if highest_harmonic < h.n:
highest_harmonic = h.n
limit = min(limit, highest_harmonic)
# HACK: remove limit
#limit = defs.TOTAL_HARMONICS
#print "limit to:", limit
#harmonics_enable = [True]*defs.TOTAL_HARMONICS
harmonics_enable = [True]*limit
bins_estimate = [ partials.mode_B2freq(bin_f0, i, B) for
i in range(1,len(harmonics_enable)+1) ]
bins_naive = [ i*bin_f0 for
i in range(1,len(harmonics_enable)+1) ]
if defs.B_PLOT:
pylab.figure()
pylab.plot(initial_noise_freqs,
stft.amplitude2db(initial_noise_floor), color='black')
#pylab.plot(initial_noise_freqs,
# stft.amplitude2db(initial_noise_floor)+defs.B_MINIMUM_HARMONIC_SNR,
# color='black')
pylab.xlabel("Frequency (seconds)")
pylab.ylabel("Power (/ dB)")
for i in range(estimate_B_buffers.shape[0]):
#color = matplotlib.cm.spring(float(wav_i)/len(filenames))
#color = matplotlib.cm.RdYlGn(
#color = matplotlib.cm.spring(
# float(i)/len(estimate_B_buffers_this_list))
pylab.plot(freqs,
stft.amplitude2db(estimate_B_buffers[i,:]),
#color=color,
color="orange",
alpha=0.5,
label=basename,
)
for est in bins_estimate:
low = stft.bin2hertz(est - bin_spread_below, sample_rate)
high = stft.bin2hertz(est + bin_spread_above, sample_rate)
if True:
pylab.axvspan(low, high, color='c', alpha=0.3)
else:
pylab.axvline(stft.bin2hertz(est, sample_rate),
color='cyan', alpha=0.3,
#linewidth=2.0
)
for naive in bins_naive:
freq = stft.bin2hertz(naive, sample_rate)
pylab.axvline(freq, color='grey', alpha=0.2,
#linewidth=2.0
)
for j, harm in enumerate(harmonics):
if harm.mag == 0:
continue
fn = stft.bin2hertz(harm.fft_bin, sample_rate)
mag = stft.amplitude2db(harm.mag)
#pylab.plot(fn, mag, 'o',
# color='green'
# )
pylab.xlabel("Frequency")
pylab.ylabel("Decibels")
if defs.B_DUMP_HARMS:
t_fns = []
t_mags = []
for j, harm in enumerate(harmonics):
if harm.mag == 0:
continue
fn = stft.bin2hertz(harm.fft_bin, sample_rate)
mag = stft.amplitude2db(harm.mag)
t_fns.append(fn)
t_mags.append(mag)
data = numpy.vstack((t_fns, t_mags)).transpose()
numpy.savetxt("B-harms.txt", data)
if defs.B_PLOT:
pylab.show()
f0 = stft.bin2hertz(bin_f0, sample_rate)
stiff_ideal_limit = stiff_ideal_conflict.find_limit(bin_f0, B,
bin_spread_below, bin_spread_above)
lim = min(stiff_ideal_limit, limit)
detected_freqs = StringFreqsB(f0, B, lim)
stats = StringFreqsB_stats()
stats.num_files = len(filenames)
stats.rsquared = rsquared
stats.highest_mode_detected = limit
stats.highest_mode_stiff_ideal = stiff_ideal_limit
stats.basename = basename
adjusted_B, delta_fn = adjust_B.adjust(basename, limit, f0, B)
if adjusted_B is not None:
stiff_ideal_lim_adjusted = stiff_ideal_conflict.find_limit(
bin_f0, adjusted_B,
bin_spread_below, bin_spread_above)
lim = min(stiff_ideal_lim_adjusted, limit)
adjusted_freqs = StringFreqsB(f0, adjusted_B, lim)
adjusted_freqs.delta_fn = delta_fn
stats.highest_mode_stiff_ideal_adjusted = stiff_ideal_lim_adjusted
stats.delta_fn = delta_fn
final = StringFreqsB(f0, adjusted_B,
min(stats.highest_mode_detected,
stats.highest_mode_stiff_ideal,
stiff_ideal_lim_adjusted))
else:
adjusted_freqs = None
final = StringFreqsB(f0, B,
min(stats.highest_mode_detected,
stats.highest_mode_stiff_ideal))
return detected_freqs, adjusted_freqs, stats, final
def generate_data(self, dirname, basename, plot_harms=False):
#png_dirname = os.path.join(dirname, 'png')
#if not os.path.exists(png_dirname):
# os.makedirs(png_dirname)
if defs.ONLY_FILES_CONTAINING:
search_filename = '%s*%s*wav' % (
basename, defs.ONLY_FILES_CONTAINING)
else:
search_filename = basename + '*.wav'
filenames = glob.glob(
os.path.join(dirname, search_filename))
filenames = filter(lambda x: "noise" not in x, filenames)
filenames.sort()
if defs.ONLY_N_FILES > 0:
filenames = filenames[:defs.ONLY_N_FILES]
_, _, _, final = estimate_f0_B.estimate_f0_B(filenames)
f0 = final.f0
B = final.B
limit = final.highest_mode
stats = HarmonicsStats()
stats.num_files = len(filenames)
decays = []
for wav_filename_count, wav_filename in enumerate(filenames):
basename = os.path.basename(wav_filename)
#print "Processing", wav_filename
pickle_filename = wav_filename+".stft.pickle"
if os.path.exists(pickle_filename):
pickle_file = open(pickle_filename, 'rb')
harmonics, hop_rate = pickle.load(pickle_file)
pickle_file.close()
#print "... read pickle"
else:
#print "... calculating new"
#frequency = expected_frequencies.get_freq_from_filename(
# wav_filename, f0, B)
harmonics, hop_rate = stft_interface.get_harmonics(
wav_filename, f0, B, limit)
pickle_file = open(pickle_filename, 'wb')
pickle.dump( (harmonics, hop_rate), pickle_file, -1)
pickle_file.close()
#print "... wrote pickle"
nums = tables.save_partials(os.path.splitext(basename)[0])
if nums:
dest_dir = "out/"
for num in nums:
h = harmonics[num]
#print h.n
data = numpy.vstack( (
h.frame_numbers*hop_rate,
stft.amplitude2db(h.mags)
)).transpose()
filename = dest_dir + '/partials-%s-%i.txt' % (
basename, num)
numpy.savetxt( filename, data)
print "Wrote to %s" % filename
for i, h in enumerate(harmonics):
stats.num_harms_original += 1
if len(h.mags) < 2:
stats.num_harms_max_no_above_noise += 1
continue
#if h.n > 0:
# pylab.figure()
# pylab.semilogy(h.mags, '.')
# pylab.title("mode %i" % h.n)
# pylab.show()
#N = 16
#b, a = scipy.signal.butter(N, 0.25)
#b = scipy.signal.firwin(N, 0.25)
#a = 1.0
#zi = scipy.signal.lfiltic(b, a, h.mags[0:N],
# h.mags[0:N])
#h.mags, zf = scipy.signal.lfilter(b, a, h.mags,
# zi=zi)
#pylab.semilogy(h.mags)
#pylab.show()
#if defs.HARMONICS_PRINT_SUMMARY:
# print "n: %i\tbegin" %(h.n)
noise_mean = get_noise_mean(h.mags, 0.9)
#noise_top = get_noise_top(h.mags, 0.9)
#frames_above = num_above_noise(h.mags, noise_top)
frames_above = num_above_noise(h.mags, noise_mean)
#print h.n, "above:", frames_above
noise_top_extra_min = stft.db2amplitude(
stft.amplitude2db(noise_mean)
+ defs.HARMONIC_MAX_DB_ABOVE_NOISE_TOP)
if max(h.mags) < noise_top_extra_min:
# print "bail noise_top_extra"
# # FIXME: special
stats.num_harms_max_no_above_noise += 1
continue
#print h.n, frames_above
if frames_above < defs.HARMONIC_MIN_HOPS_ABOVE_NOISE:
stats.num_harms_num_no_above_noise += 1
#print "not enough above noise top", frames_above
continue
### experiment: only take beginning
#h.frame_numbers = h.frame_numbers[:frames_above]
#h.mags = h.mags[:frames_above]
### experiment: test the derivative
#dh_mags = numpy.zeros(len(h.mags)-1)
#for i in range(0, len(h.mags)-1):
# subtraction on log scale
#dh_mags[i] = (h.mags[i+1] / h.mags[i]) * (
# 1.0 + h.mags[i])
# dh_mags[i] = (h.mags[i+1] - h.mags[i])
#ddh_mags = numpy.zeros(len(dh_mags))
#for i in range(0, len(dh_mags)-1):
# ddh_mags[i] = dh_mags[i+1] - dh_mags[i]
#dh_mags = (h.mags[1:] - h.mags[:-1])
#sub = (dh_mags > 0)
##print dh_mags * sub
#num_below_zero = (dh_mags * sub).sum()
#print "bad: %.3g" % (float(num_below_zero) / len(dh_mags) )
##pylab.plot(dh_mags)
##pylab.show()
#print "%.3g\t%.3g\t%.3g\t%.3g" % (
# scipy.std(dh_mags), scipy.median(dh_mags),
# scipy.std(ddh_mags), scipy.median(ddh_mags))
#if h.n in defs.HARMONICS_FIT_PLOT_N:
#if False:
# #pylab.plot(h.mags, '-o')
# pylab.plot(dh_mags, '-')
# pylab.plot(ddh_mags, '-*')
# #pylab.xlim([0, 30])
#
# pylab.show()
#exit(1)
#num_harms_above_noise += 1
ts = hop_rate * h.frame_numbers
if h.n == defs.HARMONICS_FIT_PLOT_N:
show=True
plot=False
plot_last=True
else:
show=False
plot=False
plot_last=defs.HARMONICS_FIT_PLOT
fit, rsquared, variance = decay_exponential.fit_best_exponential(
ts, h.mags, noise_mean=noise_mean,
show=show, plot=plot, plot_last=plot_last)
if fit is None:
stats.num_harms_no_fit += 1
print "bail from no fit"
continue
#alpha = fit[2]
alpha = fit[1]
#drop_amplitude = fit[0] / noise_mean
drop_amplitude = max(h.mags) / noise_mean
drop_db = stft.amplitude2db(drop_amplitude)
#print drop_db
#if drop_db < defs.HARMONIC_MIN_DROP_DB:
# stats.num_harms_no_drop += 1
# continue
if rsquared < defs.HARMONIC_FIT_MIN_RSQUARED:
stats.num_harms_no_rsquared += 1
continue
#if variance > defs.HARMONIC_FIT_MAX_VARIANCE:
# stats.num_harms_no_variance += 1
# continue
#if variance > 1.0:
# continue
freq = partials.mode_B2freq(f0, h.n, B)
w = 2*numpy.pi*freq
Q = w / (2*alpha)
decay = classes.Decay(freq, w, h.n, alpha, Q,
rsquared, variance, drop_db)
decays.append(decay)
stats.num_harms_end += 1
if defs.HARMONICS_PRINT_SUMMARY:
print "n: %i\t%.1f\tdecay: %.2f\tr-squared: %.2f\tvariance: %.2f\tdrop: %.2f db" % (
h.n, freq, alpha, rsquared, variance, drop_db)
#print "%s\t%i\t%i\t%i\t%i\t%i" % (
#print "%s\t%i | \t%i\t%i\t%i\t| %i" % (
# basename,
# num_harms_original,
# num_harms_no_above_noise,
# num_harms_no_fit,
# #num_harms_no_rsquared,
# num_harms_no_drop,
# num_harms_end,
# )
print "dropped:", stats.num_harms_max_no_above_noise, stats.num_harms_num_no_above_noise,
def dot_color(d):
#rs = 1.0/d.variance
#if rs > 10.:
# rs = 10.
#rs = 10*d.rsquared
rs = d.drop/10.0
rss = rs/10.0
dot = '.'
markersize = 5 + 5.0*(rss)
color = matplotlib.cm.winter(1.-rss)
return dot, color, markersize
if defs.HARMONICS_PLOT_DECAYS or plot_harms:
pylab.figure()
for d in decays:
#dot, color, markersize = dot_color(d.rsquared)
dot, color, markersize = dot_color(d)
pylab.plot(d.n, d.alpha,
dot, color=color,
markersize=markersize,
linewidth=0,
)
pylab.xlabel("mode")
pylab.ylabel("decay rates")
pylab.xlim([0, max([d.n for d in decays])+1])
#pylab.legend()
if defs.HARMONICS_PLOT_Q:
pylab.figure()
#print "# n, loss factor, weight"
for d in decays:
#print "%i, %.2e, %.2e" %(d.n, 1./d.Q, d.rsquared)
#dot, color, markersize = dot_color(1.0/d.variance)
dot, color, markersize = dot_color(d)
#if d.variance > 10 or d.rsquared < 0.25:
#if d.rsquared < 0.3:
# dot = 'x'
# color = 'red'
#else:
# print d.variance
pylab.plot(d.n, d.Q,
dot, color=color,
markersize=markersize,
linewidth=0,
)
pylab.xlabel("mode")
pylab.ylabel("Q")
pylab.xlim([0, max([d.n for d in decays])+1])
#pylab.legend()
if defs.HARMONICS_PLOT_LOSS:
pylab.figure()
#print "# n, loss factor, weight"
for d in decays:
#print "%i, %.2e, %.2e" %(d.n, 1./d.Q, d.rsquared)
#dot, color, markersize = dot_color(1.0/d.variance)
dot, color, markersize = dot_color(d)
#if d.variance > 10 or d.rsquared < 0.25:
#if d.rsquared < 0.3:
# dot = 'x'
# color = 'red'
#else:
# print d.variance
pylab.plot(d.n, 1.0/d.Q,
dot, color=color,
markersize=markersize,
linewidth=0,
)
pylab.xlabel("mode")
pylab.ylabel("loss")
pylab.xlim([0, max([d.n for d in decays])+1])
#pylab.legend()
ns = [ h.n for h in decays ]
stats.highest_harm = max(ns)
if (defs.HARMONICS_PLOT_DECAYS or defs.HARMONICS_PLOT_Q
or defs.HARMONICS_PLOT_LOSS or plot_harms):
pylab.show()
return decays, f0, B, stats
def calc_harmonics(wav_filename, f0=None, B=None,
limit=defs.TOTAL_HARMONICS):
if f0 is None:
raise Exception("need f0 and B; run another program")
# eliminate $HOME ~ and symlinks
wav_filename = os.path.realpath(os.path.expanduser(wav_filename))
basename = os.path.splitext(os.path.basename(wav_filename))[0]
shared_dirname = os.path.abspath(
os.path.join(os.path.dirname(wav_filename), '..'))
dest_dir = os.path.join(shared_dirname, "spectrum", basename)
if not os.path.exists(dest_dir):
os.makedirs(dest_dir)
window_buffers, sample_rate = stft.get_buffers_from_file(wav_filename)
freqs = [ stft.bin2hertz(i, sample_rate)
for i in range(stft.WINDOWSIZE/2+1) ]
### get noise for tuning off low harmonics
initial_noise_floor, initial_noise_freqs, _, _, _ = calc_noise.get_noise(wav_filename)
noise_cutoff = stft.db2amplitude(
stft.amplitude2db(initial_noise_floor)
+defs.STFT_MIN_DB_ABOVE_NOISE)
bin_f0 = stft.hertz2bin(f0, sample_rate)
# radius of search area for peaks
bin_spread_below = int(
stft.hertz2bin(defs.STFT_PEAK_SPREAD_BELOW_HERTZ*f0,
sample_rate))
bin_spread_above = int(
stft.hertz2bin(defs.STFT_PEAK_SPREAD_ABOVE_HERTZ*f0,
sample_rate))
bin_spread_below = 3
bin_spread_above = 3
if defs.STFT_DUMP_TEXT:
write_data.write_Bs(dest_dir, sample_rate, f0, B, limit,
bin_spread_below, bin_spread_above)
write_data.write_ideals(dest_dir, f0, limit)
# store the peaks
harmonics = [None]*limit
spectrums = []
table_info = tables.save_fft(basename)
if table_info:
harms_freqs = []
harms_mags = []
if defs.ONLY_N_WINDOWS:
window_buffers = window_buffers[:defs.ONLY_N_WINDOWS]
for window_number, window_buffer in enumerate(window_buffers):
#print '-------- window --- %i' % window_number
#fft_amplitude = stft.stft(window_buffer)
fft_amplitude = stft.stft_amplitude(window_buffer)
if window_number == 0:
write_data.write_spectrum(dest_dir, window_number,
freqs, stft.amplitude2db(fft_amplitude))
if defs.STFT_DUMP_TEXT:
write_data.write_spectrum(dest_dir, window_number,
freqs, stft.amplitude2db(fft_amplitude))
spectrums.append(fft_amplitude)
# get harmonic peaks, and disable harmonics if can't do
harms, _ = partials.get_freqs_mags(
limit, bin_f0, B, fft_amplitude,
bin_spread_below, bin_spread_above,
only_peaks=False)
if defs.STFT_PLOT_PARTIALS:
plots.plot_partials(fft_amplitude, sample_rate, harms,
bin_f0, B, bin_spread_below, bin_spread_above
)
if defs.STFT_DUMP_TEXT:
dump_freqs = numpy.zeros(limit)
dump_mags = numpy.zeros(limit)
if table_info:
harm_freqs = []
harm_mags = []
for h in harms:
i = h.n-1
if harmonics[i] is None:
#print stft.bin2hertz(h.fft_bin, sample_rate), h.mag, noise_cutoff[h.fft_bin]
harmonics[i] = classes.HarmonicSignal(h.n)
#if use_harmonic(h, noise_cutoff, fft_amplitude,
# bin_f0, B,
# bin_spread_below, bin_spread_above,
# ):
# harmonics[i] = classes.HarmonicSignal(h.n)
#else:
# #print "disable harmonic ", n
# harmonics[i] = False
if harmonics[i] is not False:
if h.mag == 0:
continue
if defs.STFT_DUMP_TEXT:
dump_freqs[i] = stft.bin2hertz(h.fft_bin, sample_rate)
dump_mags[i] = h.mag
if table_info:
harm_freqs.append(stft.bin2hertz(h.fft_bin, sample_rate))
harm_mags.append(h.mag)
harmonics[i].mags.append(h.mag)
harmonics[i].frame_numbers.append(window_number)
#print harmonics[i]
if table_info:
harms_freqs.append(harm_freqs)
harms_mags.append(harm_mags)
if defs.STFT_DUMP_TEXT:
#print dump_mags
write_data.write_harms(dest_dir, window_number,
dump_freqs, dump_mags, harmonics)
if (defs.STFT_PLOT_FIRST_N > 0) and (window_number < defs.STFT_PLOT_FIRST_N):
plots.plot_stft_first_n(window_number,
defs.STFT_PLOT_FIRST_N,
fft_amplitude, sample_rate, harms, wav_filename,
bin_f0, B, bin_spread_below, bin_spread_above
)
if window_number >= defs.STFT_PLOT_FIRST_N - 1:
pylab.show()
dh = float(defs.HOPSIZE) / sample_rate
if defs.STFT_DUMP_ALL:
write_data.write_stft_all(dest_dir, spectrums, freqs, dh)
table_info = tables.save_fft(basename)
if table_info:
for ti in table_info:
write_data.write_stft_3d(basename, spectrums, freqs, dh,
ti, harms_freqs, harms_mags, sample_rate)
# clean up harmonics
harmonics = filter(lambda x: x is not False, harmonics)
for h in harmonics:
h.mags = numpy.array(h.mags)
h.frame_numbers = numpy.array(h.frame_numbers)
#pylab.plot(stft.amplitude2db(h.mags))
#pylab.show()
return harmonics, dh
def estimate_f0_B(filenames):
### ASSUME: all filenames are of the same instrument-string
wav_filename = filenames[0]
basename = '-'.join(os.path.basename(wav_filename).split('-')[0:3])
if basename.startswith("test-440f"):
return 440.0, 0, 1, 1, 1, 1
### get initial f0 estimate
base_frequency_estimate = expected_frequencies.get_freq_from_filename(
wav_filename)
### get noise
initial_noise_floor, initial_noise_freqs, _, _, _ = calc_noise.get_noise(
wav_filename)
noise_cutoff = stft.db2amplitude(
stft.amplitude2db(initial_noise_floor) + defs.B_MINIMUM_HARMONIC_SNR)
#### get FFT frames from audio files
sample_rate = None
freqs = None
estimate_B_buffers_list = []
for wav_i, wav_filename in enumerate(filenames):
#print wav_filename
#window_buffer, sample_rate = stft.get_long_buffer_from_file(wav_filename,
window_buffers, sample_rate = stft.get_buffers_from_file(
wav_filename, (defs.B_NUM_BUFFERS_ESTIMATE))
if freqs is None:
freqs = [
stft.bin2hertz(i, sample_rate)
for i in range(stft.WINDOWSIZE / 2 + 1)
]
estimate_B_buffers_this_list = []
#fft_amplitude = stft.fft_amplitude(window_buffer, sample_rate)
#estimate_B_buffers_this_list.append(fft_amplitude)
for window_number in range(defs.B_NUM_BUFFERS_ESTIMATE):
window_buffer = window_buffers[window_number]
fft_amplitude = stft.stft_amplitude(window_buffer)
estimate_B_buffers_this_list.append(fft_amplitude)
estimate_B_buffers_list.extend(estimate_B_buffers_this_list)
estimate_B_buffers = numpy.array(estimate_B_buffers_list)
### radius of search area for peaks
# used with STFT only
bin_initial_estimate = stft.hertz2bin(base_frequency_estimate, sample_rate)
#bin_initial_estimate = (base_frequency_estimate
# * fft_amplitude.shape[0] / (sample_rate/2)
# )
#print bin_initial_estimate
bin_spread_below = int(
math.ceil(
abs(
stft.hertz2bin((1.0 - defs.B_PEAK_SPREAD_BELOW_HERTZ) *
base_frequency_estimate, sample_rate) -
bin_initial_estimate)))
bin_spread_above = int(
math.ceil(
stft.hertz2bin((1.0 + defs.B_PEAK_SPREAD_ABOVE_HERTZ) *
base_frequency_estimate, sample_rate) -
bin_initial_estimate))
#bin_spread_below = int(round(bin_initial_estimate *
# defs.B_PEAK_SPREAD_BELOW_HERTZ))
#bin_spread_above = int(round(bin_initial_estimate *
# defs.B_PEAK_SPREAD_BELOW_HERTZ))
#bin_spread_below_main = int(
# stft.hertz2bin(defs.STFT_PEAK_SPREAD_BELOW_HERTZ*base_frequency_estimate,
# sample_rate))
#bin_spread_above_main = int(
# stft.hertz2bin(defs.STFT_PEAK_SPREAD_ABOVE_HERTZ*base_frequency_estimate,
# sample_rate))
### actual estimate
bin_f0, B, rsquared, harmonics, limit = get_bin_f0_B(
bin_initial_estimate,
estimate_B_buffers,
noise_cutoff,
#estimate_B_buffers, numpy.zeros(defs.LONG_WINDOWSIZE+1),
bin_spread_below,
bin_spread_above,
sample_rate)
highest_harmonic = 0
for h in harmonics:
if highest_harmonic < h.n:
highest_harmonic = h.n
limit = min(limit, highest_harmonic)
# HACK: remove limit
#limit = defs.TOTAL_HARMONICS
#print "limit to:", limit
#harmonics_enable = [True]*defs.TOTAL_HARMONICS
harmonics_enable = [True] * limit
bins_estimate = [
partials.mode_B2freq(bin_f0, i, B)
for i in range(1,
len(harmonics_enable) + 1)
]
bins_naive = [i * bin_f0 for i in range(1, len(harmonics_enable) + 1)]
if defs.B_PLOT:
pylab.figure()
pylab.plot(initial_noise_freqs,
stft.amplitude2db(initial_noise_floor),
color='black')
#pylab.plot(initial_noise_freqs,
# stft.amplitude2db(initial_noise_floor)+defs.B_MINIMUM_HARMONIC_SNR,
# color='black')
pylab.xlabel("Frequency (seconds)")
pylab.ylabel("Power (/ dB)")
for i in range(estimate_B_buffers.shape[0]):
#color = matplotlib.cm.spring(float(wav_i)/len(filenames))
#color = matplotlib.cm.RdYlGn(
#color = matplotlib.cm.spring(
# float(i)/len(estimate_B_buffers_this_list))
pylab.plot(
freqs,
stft.amplitude2db(estimate_B_buffers[i, :]),
#color=color,
color="orange",
alpha=0.5,
label=basename,
)
for est in bins_estimate:
low = stft.bin2hertz(est - bin_spread_below, sample_rate)
high = stft.bin2hertz(est + bin_spread_above, sample_rate)
if True:
pylab.axvspan(low, high, color='c', alpha=0.3)
else:
pylab.axvline(
stft.bin2hertz(est, sample_rate),
color='cyan',
alpha=0.3,
#linewidth=2.0
)
for naive in bins_naive:
freq = stft.bin2hertz(naive, sample_rate)
pylab.axvline(
freq,
color='grey',
alpha=0.2,
#linewidth=2.0
)
for j, harm in enumerate(harmonics):
if harm.mag == 0:
continue
fn = stft.bin2hertz(harm.fft_bin, sample_rate)
mag = stft.amplitude2db(harm.mag)
#pylab.plot(fn, mag, 'o',
# color='green'
# )
pylab.xlabel("Frequency")
pylab.ylabel("Decibels")
if defs.B_DUMP_HARMS:
t_fns = []
t_mags = []
for j, harm in enumerate(harmonics):
if harm.mag == 0:
continue
fn = stft.bin2hertz(harm.fft_bin, sample_rate)
mag = stft.amplitude2db(harm.mag)
t_fns.append(fn)
t_mags.append(mag)
data = numpy.vstack((t_fns, t_mags)).transpose()
numpy.savetxt("B-harms.txt", data)
if defs.B_PLOT:
pylab.show()
f0 = stft.bin2hertz(bin_f0, sample_rate)
stiff_ideal_limit = stiff_ideal_conflict.find_limit(
bin_f0, B, bin_spread_below, bin_spread_above)
lim = min(stiff_ideal_limit, limit)
detected_freqs = StringFreqsB(f0, B, lim)
stats = StringFreqsB_stats()
stats.num_files = len(filenames)
stats.rsquared = rsquared
stats.highest_mode_detected = limit
stats.highest_mode_stiff_ideal = stiff_ideal_limit
stats.basename = basename
adjusted_B, delta_fn = adjust_B.adjust(basename, limit, f0, B)
if adjusted_B is not None:
stiff_ideal_lim_adjusted = stiff_ideal_conflict.find_limit(
bin_f0, adjusted_B, bin_spread_below, bin_spread_above)
lim = min(stiff_ideal_lim_adjusted, limit)
adjusted_freqs = StringFreqsB(f0, adjusted_B, lim)
adjusted_freqs.delta_fn = delta_fn
stats.highest_mode_stiff_ideal_adjusted = stiff_ideal_lim_adjusted
stats.delta_fn = delta_fn
final = StringFreqsB(
f0, adjusted_B,
min(stats.highest_mode_detected, stats.highest_mode_stiff_ideal,
stiff_ideal_lim_adjusted))
else:
adjusted_freqs = None
final = StringFreqsB(
f0, B,
min(stats.highest_mode_detected, stats.highest_mode_stiff_ideal))
return detected_freqs, adjusted_freqs, stats, final
