def set_state(self, state):
if state == self.state:
return
self.state = state
logging.info('new state: %s' % state)
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def set_state(self, state, w=None):
"""set the state that can be used by external agents
like glusterd for status reporting"""
computestate = lambda: self.state and self._ST_ORD[max(
self._ST_ORD.index(s) for s in self.state.values())]
if w:
self.lock.acquire()
old_state = computestate()
self.state[w] = state
state = computestate()
self.lock.release()
if state != old_state:
self.set_state(state)
else:
if getattr(gconf, 'state_file', None):
# If previous state is paused, suffix the
# new state with '(Paused)'
try:
with open(gconf.state_file, "r") as f:
content = f.read()
if "paused" in content.lower():
state = state + '(Paused)'
except IOError:
pass
logging.info('new state: %s' % state)
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def set_state(self, state, w=None):
"""set the state that can be used by external agents
like glusterd for status reporting"""
computestate = lambda: self.state and self._ST_ORD[
max(self._ST_ORD.index(s) for s in self.state.values())]
if w:
self.lock.acquire()
old_state = computestate()
self.state[w] = state
state = computestate()
self.lock.release()
if state != old_state:
self.set_state(state)
else:
if getattr(gconf, 'state_file', None):
# If previous state is paused, suffix the
# new state with '(Paused)'
try:
with open(gconf.state_file, "r") as f:
content = f.read()
if "paused" in content.lower():
state = state + '(Paused)'
except IOError:
pass
logging.info('new state: %s' % state)
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def set_state(self, state):
if state == self.state:
return
self.state = state
logging.info('new state: %s' % state)
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def set_state(self, state):
"""set the state that can be used by external agents
like glusterd for status reporting"""
if state == self.state:
return
self.state = state
logging.info('new state: %s' % state)
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def write(self, trfn, opt, *a, **kw):
def mergeconf(f):
self.config = ConfigParser.RawConfigParser()
self.config.readfp(f)
self._normconfig()
if not self.config.has_section(SECT_META):
self.config.add_section(SECT_META)
self.config.set(SECT_META, 'version', config_version)
return trfn(norm(opt), *a, **kw)
def updateconf(f):
self.config.write(f)
update_file(self.path, updateconf, mergeconf)
def write(self, trfn, opt, *a, **kw):
def mergeconf(f):
self.config = ConfigParser.RawConfigParser()
self.config.readfp(f)
self._normconfig()
if not self.config.has_section(SECT_META):
self.config.add_section(SECT_META)
self.config.set(SECT_META, 'version', config_version)
return trfn(norm(opt), *a, **kw)
def updateconf(f):
self.config.write(f)
update_file(self.path, updateconf, mergeconf)
def set_state(self, state, w=None):
"""set the state that can be used by external agents
like glusterd for status reporting"""
computestate = lambda: self.state and self._ST_ORD[max(self._ST_ORD.index(s) for s in self.state.values())]
if w:
self.lock.acquire()
old_state = computestate()
self.state[w] = state
state = computestate()
self.lock.release()
if state != old_state:
self.set_state(state)
else:
logging.info("new state: %s" % state)
if getattr(gconf, "state_file", None):
update_file(gconf.state_file, lambda f: f.write(state + "\n"))
def set_state(self, state, w=None):
"""set the state that can be used by external agents
like glusterd for status reporting"""
computestate = lambda: self.state and self._ST_ORD[
max(self._ST_ORD.index(s) for s in self.state.values())]
if w:
self.lock.acquire()
old_state = computestate()
self.state[w] = state
state = computestate()
self.lock.release()
if state != old_state:
self.set_state(state)
else:
logging.info('new state: %s' % state)
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(state + '\n'))
def write(self, trfn, opt, *a, **kw):
"""update on-disk config transactionally
@trfn is the transaction function
"""
def mergeconf(f):
self.config = ConfigParser.RawConfigParser()
self.config.readfp(f)
self._normconfig()
if not self.config.has_section(SECT_META):
self.config.add_section(SECT_META)
self.config.set(SECT_META, "version", config_version)
return trfn(norm(opt), *a, **kw)
def updateconf(f):
self.config.write(f)
update_file(self.path, updateconf, mergeconf)
def main_i():
"""internal main routine
parse command line, decide what action will be taken;
we can either:
- query/manipulate configuration
- format gsyncd urls using gsyncd's url parsing engine
- start service in following modes, in given stages:
- agent: startup(), ChangelogAgent()
- monitor: startup(), monitor()
- master: startup(), connect_remote(), connect(), service_loop()
- slave: startup(), connect(), service_loop()
"""
rconf = {'go_daemon': 'should'}
def store_abs(opt, optstr, val, parser):
if val and val != '-':
val = os.path.abspath(val)
setattr(parser.values, opt.dest, val)
def store_local(opt, optstr, val, parser):
rconf[opt.dest] = val
def store_local_curry(val):
return lambda o, oo, vx, p: store_local(o, oo, val, p)
def store_local_obj(op, dmake):
return lambda o, oo, vx, p: store_local(
o, oo, FreeObject(op=op, **dmake(vx)), p)
op = OptionParser(
usage="%prog [options...] <master> <slave>", version="%prog 0.0.1")
op.add_option('--gluster-command-dir', metavar='DIR', default='')
op.add_option('--gluster-log-file', metavar='LOGF',
default=os.devnull, type=str, action='callback',
callback=store_abs)
op.add_option('--gluster-log-level', metavar='LVL')
op.add_option('--gluster-params', metavar='PRMS', default='')
op.add_option(
'--glusterd-uuid', metavar='UUID', type=str, default='',
help=SUPPRESS_HELP)
op.add_option(
'--gluster-cli-options', metavar='OPTS', default='--log-file=-')
op.add_option('--mountbroker', metavar='LABEL')
op.add_option('-p', '--pid-file', metavar='PIDF', type=str,
action='callback', callback=store_abs)
op.add_option('-l', '--log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--iprefix', metavar='LOGD', type=str,
action='callback', callback=store_abs)
op.add_option('--changelog-log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--log-file-mbr', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-file', metavar='STATF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-detail-file', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--georep-session-working-dir', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--ignore-deletes', default=False, action='store_true')
op.add_option('--isolated-slave', default=False, action='store_true')
op.add_option('--use-rsync-xattrs', default=False, action='store_true')
op.add_option('--pause-on-start', default=False, action='store_true')
op.add_option('-L', '--log-level', metavar='LVL')
op.add_option('-r', '--remote-gsyncd', metavar='CMD',
default=os.path.abspath(sys.argv[0]))
op.add_option('--volume-id', metavar='UUID')
op.add_option('--slave-id', metavar='ID')
op.add_option('--session-owner', metavar='ID')
op.add_option('--local-id', metavar='ID', help=SUPPRESS_HELP, default='')
op.add_option(
'--local-path', metavar='PATH', help=SUPPRESS_HELP, default='')
op.add_option('-s', '--ssh-command', metavar='CMD', default='ssh')
op.add_option('--ssh-command-tar', metavar='CMD', default='ssh')
op.add_option('--rsync-command', metavar='CMD', default='rsync')
op.add_option('--rsync-options', metavar='OPTS', default='')
op.add_option('--rsync-ssh-options', metavar='OPTS', default='--compress')
op.add_option('--timeout', metavar='SEC', type=int, default=120)
op.add_option('--connection-timeout', metavar='SEC',
type=int, default=60, help=SUPPRESS_HELP)
op.add_option('--sync-jobs', metavar='N', type=int, default=3)
op.add_option('--replica-failover-interval', metavar='N',
type=int, default=1)
op.add_option('--changelog-archive-format', metavar='N',
type=str, default="%Y%m")
op.add_option(
'--turns', metavar='N', type=int, default=0, help=SUPPRESS_HELP)
op.add_option('--allow-network', metavar='IPS', default='')
op.add_option('--socketdir', metavar='DIR')
op.add_option('--state-socket-unencoded', metavar='SOCKF',
type=str, action='callback', callback=store_abs)
op.add_option('--checkpoint', metavar='LABEL', default='')
# tunables for failover/failback mechanism:
# None - gsyncd behaves as normal
# blind - gsyncd works with xtime pairs to identify
# candidates for synchronization
# wrapup - same as normal mode but does not assign
# xtimes to orphaned files
# see crawl() for usage of the above tunables
op.add_option('--special-sync-mode', type=str, help=SUPPRESS_HELP)
# changelog or xtime? (TODO: Change the default)
op.add_option(
'--change-detector', metavar='MODE', type=str, default='xtime')
# sleep interval for change detection (xtime crawl uses a hardcoded 1
# second sleep time)
op.add_option('--change-interval', metavar='SEC', type=int, default=3)
# working directory for changelog based mechanism
op.add_option('--working-dir', metavar='DIR', type=str,
action='callback', callback=store_abs)
op.add_option('--use-tarssh', default=False, action='store_true')
op.add_option('-c', '--config-file', metavar='CONF',
type=str, action='callback', callback=store_local)
# duh. need to specify dest or value will be mapped to None :S
op.add_option('--monitor', dest='monitor', action='callback',
callback=store_local_curry(True))
op.add_option('--agent', dest='agent', action='callback',
callback=store_local_curry(True))
op.add_option('--resource-local', dest='resource_local',
type=str, action='callback', callback=store_local)
op.add_option('--resource-remote', dest='resource_remote',
type=str, action='callback', callback=store_local)
op.add_option('--feedback-fd', dest='feedback_fd', type=int,
help=SUPPRESS_HELP, action='callback', callback=store_local)
op.add_option('--rpc-fd', dest='rpc_fd', type=str, help=SUPPRESS_HELP)
op.add_option('--listen', dest='listen', help=SUPPRESS_HELP,
action='callback', callback=store_local_curry(True))
op.add_option('-N', '--no-daemon', dest="go_daemon",
action='callback', callback=store_local_curry('dont'))
op.add_option('--verify', type=str, dest="verify",
action='callback', callback=store_local)
op.add_option('--create', type=str, dest="create",
action='callback', callback=store_local)
op.add_option('--delete', dest='delete', action='callback',
callback=store_local_curry(True))
op.add_option('--debug', dest="go_daemon", action='callback',
callback=lambda *a: (store_local_curry('dont')(*a),
setattr(
a[-1].values, 'log_file', '-'),
setattr(a[-1].values, 'log_level',
'DEBUG'),
setattr(a[-1].values,
'changelog_log_file', '-')))
op.add_option('--path', type=str, action='append')
for a in ('check', 'get'):
op.add_option('--config-' + a, metavar='OPT', type=str, dest='config',
action='callback',
callback=store_local_obj(a, lambda vx: {'opt': vx}))
op.add_option('--config-get-all', dest='config', action='callback',
callback=store_local_obj('get', lambda vx: {'opt': None}))
for m in ('', '-rx', '-glob'):
# call this code 'Pythonic' eh?
# have to define a one-shot local function to be able
# to inject (a value depending on the)
# iteration variable into the inner lambda
def conf_mod_opt_regex_variant(rx):
op.add_option('--config-set' + m, metavar='OPT VAL', type=str,
nargs=2, dest='config', action='callback',
callback=store_local_obj('set', lambda vx: {
'opt': vx[0], 'val': vx[1], 'rx': rx}))
op.add_option('--config-del' + m, metavar='OPT', type=str,
dest='config', action='callback',
callback=store_local_obj('del', lambda vx: {
'opt': vx, 'rx': rx}))
conf_mod_opt_regex_variant(m and m[1:] or False)
op.add_option('--normalize-url', dest='url_print',
action='callback', callback=store_local_curry('normal'))
op.add_option('--canonicalize-url', dest='url_print',
action='callback', callback=store_local_curry('canon'))
op.add_option('--canonicalize-escape-url', dest='url_print',
action='callback', callback=store_local_curry('canon_esc'))
tunables = [norm(o.get_opt_string()[2:])
for o in op.option_list
if (o.callback in (store_abs, 'store_true', None) and
o.get_opt_string() not in ('--version', '--help'))]
remote_tunables = ['listen', 'go_daemon', 'timeout',
'session_owner', 'config_file', 'use_rsync_xattrs']
rq_remote_tunables = {'listen': True}
# precedence for sources of values: 1) commandline, 2) cfg file, 3)
# defaults for this to work out we need to tell apart defaults from
# explicitly set options... so churn out the defaults here and call
# the parser with virgin values container.
defaults = op.get_default_values()
opts, args = op.parse_args(values=optparse.Values())
args_orig = args[:]
r = rconf.get('resource_local')
if r:
if len(args) == 0:
args.append(None)
args[0] = r
r = rconf.get('resource_remote')
if r:
if len(args) == 0:
raise GsyncdError('local resource unspecfied')
elif len(args) == 1:
args.append(None)
args[1] = r
confdata = rconf.get('config')
if not (len(args) == 2 or
(len(args) == 1 and rconf.get('listen')) or
(len(args) <= 2 and confdata) or
rconf.get('url_print')):
sys.stderr.write("error: incorrect number of arguments\n\n")
sys.stderr.write(op.get_usage() + "\n")
sys.exit(1)
verify = rconf.get('verify')
if verify:
logging.info(verify)
logging.info("Able to spawn gsyncd.py")
return
restricted = os.getenv('_GSYNCD_RESTRICTED_')
if restricted:
allopts = {}
allopts.update(opts.__dict__)
allopts.update(rconf)
bannedtuns = set(allopts.keys()) - set(remote_tunables)
if bannedtuns:
raise GsyncdError('following tunables cannot be set with '
'restricted SSH invocaton: ' +
', '.join(bannedtuns))
for k, v in rq_remote_tunables.items():
if not k in allopts or allopts[k] != v:
raise GsyncdError('tunable %s is not set to value %s required '
'for restricted SSH invocaton' %
(k, v))
confrx = getattr(confdata, 'rx', None)
def makersc(aa, check=True):
if not aa:
return ([], None, None)
ra = [resource.parse_url(u) for u in aa]
local = ra[0]
remote = None
if len(ra) > 1:
remote = ra[1]
if check and not local.can_connect_to(remote):
raise GsyncdError("%s cannot work with %s" %
(local.path, remote and remote.path))
return (ra, local, remote)
if confrx:
# peers are regexen, don't try to parse them
if confrx == 'glob':
args = ['\A' + fnmatch.translate(a) for a in args]
canon_peers = args
namedict = {}
else:
dc = rconf.get('url_print')
rscs, local, remote = makersc(args_orig, not dc)
if dc:
for r in rscs:
print(r.get_url(**{'normal': {},
'canon': {'canonical': True},
'canon_esc': {'canonical': True,
'escaped': True}}[dc]))
return
pa = ([], [], [])
urlprms = (
{}, {'canonical': True}, {'canonical': True, 'escaped': True})
for x in rscs:
for i in range(len(pa)):
pa[i].append(x.get_url(**urlprms[i]))
_, canon_peers, canon_esc_peers = pa
# creating the namedict, a dict representing various ways of referring
# to / repreenting peers to be fillable in config templates
mods = (lambda x: x, lambda x: x[
0].upper() + x[1:], lambda x: 'e' + x[0].upper() + x[1:])
if remote:
rmap = {local: ('local', 'master'), remote: ('remote', 'slave')}
else:
rmap = {local: ('local', 'slave')}
namedict = {}
for i in range(len(rscs)):
x = rscs[i]
for name in rmap[x]:
for j in range(3):
namedict[mods[j](name)] = pa[j][i]
namedict[name + 'vol'] = x.volume
if name == 'remote':
namedict['remotehost'] = x.remotehost
if not 'config_file' in rconf:
rconf['config_file'] = os.path.join(
os.path.dirname(sys.argv[0]), "conf/gsyncd_template.conf")
upgrade_config_file(rconf['config_file'])
gcnf = GConffile(
rconf['config_file'], canon_peers,
defaults.__dict__, opts.__dict__, namedict)
checkpoint_change = False
if confdata:
opt_ok = norm(confdata.opt) in tunables + [None]
if confdata.op == 'check':
if opt_ok:
sys.exit(0)
else:
sys.exit(1)
elif not opt_ok:
raise GsyncdError("not a valid option: " + confdata.opt)
if confdata.op == 'get':
gcnf.get(confdata.opt)
elif confdata.op == 'set':
gcnf.set(confdata.opt, confdata.val, confdata.rx)
elif confdata.op == 'del':
gcnf.delete(confdata.opt, confdata.rx)
# when modifying checkpoint, it's important to make a log
# of that, so in that case we go on to set up logging even
# if its just config invocation
if confdata.opt == 'checkpoint' and confdata.op in ('set', 'del') and \
not confdata.rx:
checkpoint_change = True
if not checkpoint_change:
return
gconf.__dict__.update(defaults.__dict__)
gcnf.update_to(gconf.__dict__)
gconf.__dict__.update(opts.__dict__)
gconf.configinterface = gcnf
delete = rconf.get('delete')
if delete:
logging.info('geo-replication delete')
# Delete pid file, status file, socket file
cleanup_paths = []
if getattr(gconf, 'pid_file', None):
cleanup_paths.append(gconf.pid_file)
if getattr(gconf, 'state_file', None):
cleanup_paths.append(gconf.state_file)
if getattr(gconf, 'state_detail_file', None):
cleanup_paths.append(gconf.state_detail_file)
if getattr(gconf, 'state_socket_unencoded', None):
cleanup_paths.append(gconf.state_socket_unencoded)
cleanup_paths.append(rconf['config_file'][:-11] + "*")
# Cleanup changelog working dirs
if getattr(gconf, 'working_dir', None):
try:
shutil.rmtree(gconf.working_dir)
except (IOError, OSError):
if sys.exc_info()[1].errno == ENOENT:
pass
else:
raise GsyncdError(
'Error while removing working dir: %s' %
gconf.working_dir)
for path in cleanup_paths:
# To delete temp files
for f in glob.glob(path + "*"):
_unlink(f)
return
if restricted and gconf.allow_network:
ssh_conn = os.getenv('SSH_CONNECTION')
if not ssh_conn:
# legacy env var
ssh_conn = os.getenv('SSH_CLIENT')
if ssh_conn:
allowed_networks = [IPNetwork(a)
for a in gconf.allow_network.split(',')]
client_ip = IPAddress(ssh_conn.split()[0])
allowed = False
for nw in allowed_networks:
if client_ip in nw:
allowed = True
break
if not allowed:
raise GsyncdError("client IP address is not allowed")
ffd = rconf.get('feedback_fd')
if ffd:
fcntl.fcntl(ffd, fcntl.F_SETFD, fcntl.FD_CLOEXEC)
# normalize loglevel
lvl0 = gconf.log_level
if isinstance(lvl0, str):
lvl1 = lvl0.upper()
lvl2 = logging.getLevelName(lvl1)
# I have _never_ _ever_ seen such an utterly braindead
# error condition
if lvl2 == "Level " + lvl1:
raise GsyncdError('cannot recognize log level "%s"' % lvl0)
gconf.log_level = lvl2
if not privileged() and gconf.log_file_mbr:
gconf.log_file = gconf.log_file_mbr
if checkpoint_change:
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label='conf')
if confdata.op == 'set':
logging.info('checkpoint %s set' % confdata.val)
gcnf.delete('checkpoint_completed')
gcnf.delete('checkpoint_target')
elif confdata.op == 'del':
logging.info('checkpoint info was reset')
# if it is removing 'checkpoint' then we need
# to remove 'checkpoint_completed' and 'checkpoint_target' too
gcnf.delete('checkpoint_completed')
gcnf.delete('checkpoint_target')
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# directory of log path is not present,
# which happens if we get here from
# a peer-multiplexed "config-set checkpoint"
# (as that directory is created only on the
# original node)
pass
else:
raise
return
create = rconf.get('create')
if create:
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(create + '\n'))
return
go_daemon = rconf['go_daemon']
be_monitor = rconf.get('monitor')
be_agent = rconf.get('agent')
rscs, local, remote = makersc(args)
if not be_monitor and isinstance(remote, resource.SSH) and \
go_daemon == 'should':
go_daemon = 'postconn'
log_file = None
else:
log_file = gconf.log_file
if be_monitor:
label = 'monitor'
elif be_agent:
label = 'agent'
elif remote:
# master
label = gconf.local_path
else:
label = 'slave'
startup(go_daemon=go_daemon, log_file=log_file, label=label)
resource.Popen.init_errhandler()
if be_agent:
os.setsid()
logging.debug('rpc_fd: %s' % repr(gconf.rpc_fd))
return agent(Changelog(), gconf.rpc_fd)
if be_monitor:
return monitor(*rscs)
logging.info("syncing: %s" % " -> ".join(r.url for r in rscs))
if remote:
go_daemon = remote.connect_remote(go_daemon=go_daemon)
if go_daemon:
startup(go_daemon=go_daemon, log_file=gconf.log_file)
# complete remote connection in child
remote.connect_remote(go_daemon='done')
local.connect()
if ffd:
os.close(ffd)
local.service_loop(*[r for r in [remote] if r])
def main_i():
"""internal main routine
parse command line, decide what action will be taken;
we can either:
- query/manipulate configuration
- format gsyncd urls using gsyncd's url parsing engine
- start service in following modes, in given stages:
- agent: startup(), ChangelogAgent()
- monitor: startup(), monitor()
- master: startup(), connect_remote(), connect(), service_loop()
- slave: startup(), connect(), service_loop()
"""
rconf = {'go_daemon': 'should'}
def store_abs(opt, optstr, val, parser):
if val and val != '-':
val = os.path.abspath(val)
setattr(parser.values, opt.dest, val)
def store_local(opt, optstr, val, parser):
rconf[opt.dest] = val
def store_local_curry(val):
return lambda o, oo, vx, p: store_local(o, oo, val, p)
def store_local_obj(op, dmake):
return lambda o, oo, vx, p: store_local(
o, oo, FreeObject(op=op, **dmake(vx)), p)
op = OptionParser(
usage="%prog [options...] <master> <slave>", version="%prog 0.0.1")
op.add_option('--gluster-command-dir', metavar='DIR', default='')
op.add_option('--gluster-log-file', metavar='LOGF',
default=os.devnull, type=str, action='callback',
callback=store_abs)
op.add_option('--gluster-log-level', metavar='LVL')
op.add_option('--gluster-params', metavar='PRMS', default='')
op.add_option(
'--glusterd-uuid', metavar='UUID', type=str, default='',
help=SUPPRESS_HELP)
op.add_option(
'--gluster-cli-options', metavar='OPTS', default='--log-file=-')
op.add_option('--mountbroker', metavar='LABEL')
op.add_option('-p', '--pid-file', metavar='PIDF', type=str,
action='callback', callback=store_abs)
op.add_option('-l', '--log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--iprefix', metavar='LOGD', type=str,
action='callback', callback=store_abs)
op.add_option('--changelog-log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--log-file-mbr', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-file', metavar='STATF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-detail-file', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--georep-session-working-dir', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--ignore-deletes', default=False, action='store_true')
op.add_option('--isolated-slave', default=False, action='store_true')
op.add_option('--use-rsync-xattrs', default=False, action='store_true')
op.add_option('--pause-on-start', default=False, action='store_true')
op.add_option('-L', '--log-level', metavar='LVL')
op.add_option('-r', '--remote-gsyncd', metavar='CMD',
default=os.path.abspath(sys.argv[0]))
op.add_option('--volume-id', metavar='UUID')
op.add_option('--slave-id', metavar='ID')
op.add_option('--session-owner', metavar='ID')
op.add_option('--local-id', metavar='ID', help=SUPPRESS_HELP, default='')
op.add_option(
'--local-path', metavar='PATH', help=SUPPRESS_HELP, default='')
op.add_option('-s', '--ssh-command', metavar='CMD', default='ssh')
op.add_option('--ssh-command-tar', metavar='CMD', default='ssh')
op.add_option('--rsync-command', metavar='CMD', default='rsync')
op.add_option('--rsync-options', metavar='OPTS', default='')
op.add_option('--rsync-ssh-options', metavar='OPTS', default='--compress')
op.add_option('--timeout', metavar='SEC', type=int, default=120)
op.add_option('--connection-timeout', metavar='SEC',
type=int, default=60, help=SUPPRESS_HELP)
op.add_option('--sync-jobs', metavar='N', type=int, default=3)
op.add_option('--replica-failover-interval', metavar='N',
type=int, default=1)
op.add_option(
'--turns', metavar='N', type=int, default=0, help=SUPPRESS_HELP)
op.add_option('--allow-network', metavar='IPS', default='')
op.add_option('--socketdir', metavar='DIR')
op.add_option('--state-socket-unencoded', metavar='SOCKF',
type=str, action='callback', callback=store_abs)
op.add_option('--checkpoint', metavar='LABEL', default='')
# tunables for failover/failback mechanism:
# None - gsyncd behaves as normal
# blind - gsyncd works with xtime pairs to identify
# candidates for synchronization
# wrapup - same as normal mode but does not assign
# xtimes to orphaned files
# see crawl() for usage of the above tunables
op.add_option('--special-sync-mode', type=str, help=SUPPRESS_HELP)
# changelog or xtime? (TODO: Change the default)
op.add_option(
'--change-detector', metavar='MODE', type=str, default='xtime')
# sleep interval for change detection (xtime crawl uses a hardcoded 1
# second sleep time)
op.add_option('--change-interval', metavar='SEC', type=int, default=3)
# working directory for changelog based mechanism
op.add_option('--working-dir', metavar='DIR', type=str,
action='callback', callback=store_abs)
op.add_option('--use-tarssh', default=False, action='store_true')
op.add_option('-c', '--config-file', metavar='CONF',
type=str, action='callback', callback=store_local)
# duh. need to specify dest or value will be mapped to None :S
op.add_option('--monitor', dest='monitor', action='callback',
callback=store_local_curry(True))
op.add_option('--agent', dest='agent', action='callback',
callback=store_local_curry(True))
op.add_option('--resource-local', dest='resource_local',
type=str, action='callback', callback=store_local)
op.add_option('--resource-remote', dest='resource_remote',
type=str, action='callback', callback=store_local)
op.add_option('--feedback-fd', dest='feedback_fd', type=int,
help=SUPPRESS_HELP, action='callback', callback=store_local)
op.add_option('--rpc-fd', dest='rpc_fd', type=str, help=SUPPRESS_HELP)
op.add_option('--listen', dest='listen', help=SUPPRESS_HELP,
action='callback', callback=store_local_curry(True))
op.add_option('-N', '--no-daemon', dest="go_daemon",
action='callback', callback=store_local_curry('dont'))
op.add_option('--verify', type=str, dest="verify",
action='callback', callback=store_local)
op.add_option('--create', type=str, dest="create",
action='callback', callback=store_local)
op.add_option('--delete', dest='delete', action='callback',
callback=store_local_curry(True))
op.add_option('--debug', dest="go_daemon", action='callback',
callback=lambda *a: (store_local_curry('dont')(*a),
setattr(
a[-1].values, 'log_file', '-'),
setattr(a[-1].values, 'log_level',
'DEBUG'),
setattr(a[-1].values,
'changelog_log_file', '-')))
op.add_option('--path', type=str, action='append')
for a in ('check', 'get'):
op.add_option('--config-' + a, metavar='OPT', type=str, dest='config',
action='callback',
callback=store_local_obj(a, lambda vx: {'opt': vx}))
op.add_option('--config-get-all', dest='config', action='callback',
callback=store_local_obj('get', lambda vx: {'opt': None}))
for m in ('', '-rx', '-glob'):
# call this code 'Pythonic' eh?
# have to define a one-shot local function to be able
# to inject (a value depending on the)
# iteration variable into the inner lambda
def conf_mod_opt_regex_variant(rx):
op.add_option('--config-set' + m, metavar='OPT VAL', type=str,
nargs=2, dest='config', action='callback',
callback=store_local_obj('set', lambda vx: {
'opt': vx[0], 'val': vx[1], 'rx': rx}))
op.add_option('--config-del' + m, metavar='OPT', type=str,
dest='config', action='callback',
callback=store_local_obj('del', lambda vx: {
'opt': vx, 'rx': rx}))
conf_mod_opt_regex_variant(m and m[1:] or False)
op.add_option('--normalize-url', dest='url_print',
action='callback', callback=store_local_curry('normal'))
op.add_option('--canonicalize-url', dest='url_print',
action='callback', callback=store_local_curry('canon'))
op.add_option('--canonicalize-escape-url', dest='url_print',
action='callback', callback=store_local_curry('canon_esc'))
tunables = [norm(o.get_opt_string()[2:])
for o in op.option_list
if (o.callback in (store_abs, 'store_true', None) and
o.get_opt_string() not in ('--version', '--help'))]
remote_tunables = ['listen', 'go_daemon', 'timeout',
'session_owner', 'config_file', 'use_rsync_xattrs']
rq_remote_tunables = {'listen': True}
# precedence for sources of values: 1) commandline, 2) cfg file, 3)
# defaults for this to work out we need to tell apart defaults from
# explicitly set options... so churn out the defaults here and call
# the parser with virgin values container.
defaults = op.get_default_values()
opts, args = op.parse_args(values=optparse.Values())
args_orig = args[:]
r = rconf.get('resource_local')
if r:
if len(args) == 0:
args.append(None)
args[0] = r
r = rconf.get('resource_remote')
if r:
if len(args) == 0:
raise GsyncdError('local resource unspecfied')
elif len(args) == 1:
args.append(None)
args[1] = r
confdata = rconf.get('config')
if not (len(args) == 2 or
(len(args) == 1 and rconf.get('listen')) or
(len(args) <= 2 and confdata) or
rconf.get('url_print')):
sys.stderr.write("error: incorrect number of arguments\n\n")
sys.stderr.write(op.get_usage() + "\n")
sys.exit(1)
verify = rconf.get('verify')
if verify:
logging.info(verify)
logging.info("Able to spawn gsyncd.py")
return
restricted = os.getenv('_GSYNCD_RESTRICTED_')
if restricted:
allopts = {}
allopts.update(opts.__dict__)
allopts.update(rconf)
bannedtuns = set(allopts.keys()) - set(remote_tunables)
if bannedtuns:
raise GsyncdError('following tunables cannot be set with '
'restricted SSH invocaton: ' +
', '.join(bannedtuns))
for k, v in rq_remote_tunables.items():
if not k in allopts or allopts[k] != v:
raise GsyncdError('tunable %s is not set to value %s required '
'for restricted SSH invocaton' %
(k, v))
confrx = getattr(confdata, 'rx', None)
def makersc(aa, check=True):
if not aa:
return ([], None, None)
ra = [resource.parse_url(u) for u in aa]
local = ra[0]
remote = None
if len(ra) > 1:
remote = ra[1]
if check and not local.can_connect_to(remote):
raise GsyncdError("%s cannot work with %s" %
(local.path, remote and remote.path))
return (ra, local, remote)
if confrx:
# peers are regexen, don't try to parse them
if confrx == 'glob':
args = ['\A' + fnmatch.translate(a) for a in args]
canon_peers = args
namedict = {}
else:
dc = rconf.get('url_print')
rscs, local, remote = makersc(args_orig, not dc)
if dc:
for r in rscs:
print(r.get_url(**{'normal': {},
'canon': {'canonical': True},
'canon_esc': {'canonical': True,
'escaped': True}}[dc]))
return
pa = ([], [], [])
urlprms = (
{}, {'canonical': True}, {'canonical': True, 'escaped': True})
for x in rscs:
for i in range(len(pa)):
pa[i].append(x.get_url(**urlprms[i]))
_, canon_peers, canon_esc_peers = pa
# creating the namedict, a dict representing various ways of referring
# to / repreenting peers to be fillable in config templates
mods = (lambda x: x, lambda x: x[
0].upper() + x[1:], lambda x: 'e' + x[0].upper() + x[1:])
if remote:
rmap = {local: ('local', 'master'), remote: ('remote', 'slave')}
else:
rmap = {local: ('local', 'slave')}
namedict = {}
for i in range(len(rscs)):
x = rscs[i]
for name in rmap[x]:
for j in range(3):
namedict[mods[j](name)] = pa[j][i]
namedict[name + 'vol'] = x.volume
if name == 'remote':
namedict['remotehost'] = x.remotehost
if not 'config_file' in rconf:
rconf['config_file'] = os.path.join(
os.path.dirname(sys.argv[0]), "conf/gsyncd_template.conf")
upgrade_config_file(rconf['config_file'])
gcnf = GConffile(
rconf['config_file'], canon_peers,
defaults.__dict__, opts.__dict__, namedict)
checkpoint_change = False
if confdata:
opt_ok = norm(confdata.opt) in tunables + [None]
if confdata.op == 'check':
if opt_ok:
sys.exit(0)
else:
sys.exit(1)
elif not opt_ok:
raise GsyncdError("not a valid option: " + confdata.opt)
if confdata.op == 'get':
gcnf.get(confdata.opt)
elif confdata.op == 'set':
gcnf.set(confdata.opt, confdata.val, confdata.rx)
elif confdata.op == 'del':
gcnf.delete(confdata.opt, confdata.rx)
# when modifying checkpoint, it's important to make a log
# of that, so in that case we go on to set up logging even
# if its just config invocation
if confdata.opt == 'checkpoint' and confdata.op in ('set', 'del') and \
not confdata.rx:
checkpoint_change = True
if not checkpoint_change:
return
gconf.__dict__.update(defaults.__dict__)
gcnf.update_to(gconf.__dict__)
gconf.__dict__.update(opts.__dict__)
gconf.configinterface = gcnf
delete = rconf.get('delete')
if delete:
logging.info('geo-replication delete')
# Delete pid file, status file, socket file
cleanup_paths = []
if getattr(gconf, 'pid_file', None):
cleanup_paths.append(gconf.pid_file)
if getattr(gconf, 'state_file', None):
cleanup_paths.append(gconf.state_file)
if getattr(gconf, 'state_detail_file', None):
cleanup_paths.append(gconf.state_detail_file)
if getattr(gconf, 'state_socket_unencoded', None):
cleanup_paths.append(gconf.state_socket_unencoded)
cleanup_paths.append(rconf['config_file'][:-11] + "*")
# Cleanup changelog working dirs
if getattr(gconf, 'working_dir', None):
try:
shutil.rmtree(gconf.working_dir)
except (IOError, OSError):
if sys.exc_info()[1].errno == ENOENT:
pass
else:
raise GsyncdError(
'Error while removing working dir: %s' %
gconf.working_dir)
for path in cleanup_paths:
# To delete temp files
for f in glob.glob(path + "*"):
_unlink(f)
return
if restricted and gconf.allow_network:
ssh_conn = os.getenv('SSH_CONNECTION')
if not ssh_conn:
# legacy env var
ssh_conn = os.getenv('SSH_CLIENT')
if ssh_conn:
allowed_networks = [IPNetwork(a)
for a in gconf.allow_network.split(',')]
client_ip = IPAddress(ssh_conn.split()[0])
allowed = False
for nw in allowed_networks:
if client_ip in nw:
allowed = True
break
if not allowed:
raise GsyncdError("client IP address is not allowed")
ffd = rconf.get('feedback_fd')
if ffd:
fcntl.fcntl(ffd, fcntl.F_SETFD, fcntl.FD_CLOEXEC)
# normalize loglevel
lvl0 = gconf.log_level
if isinstance(lvl0, str):
lvl1 = lvl0.upper()
lvl2 = logging.getLevelName(lvl1)
# I have _never_ _ever_ seen such an utterly braindead
# error condition
if lvl2 == "Level " + lvl1:
raise GsyncdError('cannot recognize log level "%s"' % lvl0)
gconf.log_level = lvl2
if not privileged() and gconf.log_file_mbr:
gconf.log_file = gconf.log_file_mbr
if checkpoint_change:
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label='conf')
if confdata.op == 'set':
logging.info('checkpoint %s set' % confdata.val)
gcnf.delete('checkpoint_completed')
gcnf.delete('checkpoint_target')
elif confdata.op == 'del':
logging.info('checkpoint info was reset')
# if it is removing 'checkpoint' then we need
# to remove 'checkpoint_completed' and 'checkpoint_target' too
gcnf.delete('checkpoint_completed')
gcnf.delete('checkpoint_target')
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# directory of log path is not present,
# which happens if we get here from
# a peer-multiplexed "config-set checkpoint"
# (as that directory is created only on the
# original node)
pass
else:
raise
return
create = rconf.get('create')
if create:
if getattr(gconf, 'state_file', None):
update_file(gconf.state_file, lambda f: f.write(create + '\n'))
return
go_daemon = rconf['go_daemon']
be_monitor = rconf.get('monitor')
be_agent = rconf.get('agent')
rscs, local, remote = makersc(args)
if not be_monitor and isinstance(remote, resource.SSH) and \
go_daemon == 'should':
go_daemon = 'postconn'
log_file = None
else:
log_file = gconf.log_file
if be_monitor:
label = 'monitor'
elif be_agent:
label = 'agent'
elif remote:
# master
label = gconf.local_path
else:
label = 'slave'
startup(go_daemon=go_daemon, log_file=log_file, label=label)
resource.Popen.init_errhandler()
if be_agent:
os.setsid()
logging.debug('rpc_fd: %s' % repr(gconf.rpc_fd))
return agent(Changelog(), gconf.rpc_fd)
if be_monitor:
return monitor(*rscs)
logging.info("syncing: %s" % " -> ".join(r.url for r in rscs))
if remote:
go_daemon = remote.connect_remote(go_daemon=go_daemon)
if go_daemon:
startup(go_daemon=go_daemon, log_file=gconf.log_file)
# complete remote connection in child
remote.connect_remote(go_daemon='done')
local.connect()
if ffd:
os.close(ffd)
local.service_loop(*[r for r in [remote] if r])