def __init__(self, interval=1, logfile = dconf.LinksMonitor_LogFile):
self.db = DatabaseHandler()
log.info("LINKS MONITOR -- interval: %s -- logfile: %s --\n"%(str(interval),logfile))
log.info("-"*60+"\n")
log.info("Read all edges from network...\n")
self.links = self.db.getAllEdges()
self.interval = interval
log.info("Start all counters...\n")
self.counters = self._startCounters()
self.logfile = logfile
log.info("%s\n"%self.printLinksToEdges())
def __init__(self, *args, **kwargs):
super(TrafficGenerator, self).__init__(*args, **kwargs)
self.scheduler = sched.scheduler(time.time, time.sleep)
self.db = DatabaseHandler()
self.thread_handlers = []
# IP of the Load Balancer Controller host.
try:
self._lbc_ip = ipaddress.ip_interface(self.db.getIpFromHostName(dconf.LBC_Hostname)).ip.compressed
except:
log.info("WARNING: Load balancer controller could not be found in the network\n")
self._lbc_ip = None
def __init__(self, requestQueue, responseQueue):
super(feedbackThread, self).__init__()
# Create queue attributes
self.requestQueue = requestQueue
self.responseQueue = responseQueue
# Read network database
self.db = DatabaseHandler()
# Fill router cap files
self.capFilesDict = self.pickCapFiles()
# Data structure that maintains a set of current flows passing
# through each router in the last second
self.router_flowsets = {}
self.updateRouterFlowSets()
def __init__(self, capacity_graph, lock, logfile, median_filter=False, interval=1.01):
super(LinksMonitorThread, self).__init__()
# Read network database
self.db = DatabaseHandler()
# Lock object to access capacity graph
self.lock = lock
# Counters read interval
self.interval = interval
# Capacity graph object
self.cg = capacity_graph
# Dictionary that holds the binding between router id and the
# router ip in the control network
self.ip_to_control = {}
# Start router counters
self.counters = self._startCounters()
# Perform median filter or not?
self.median_filter = median_filter
# Start router-to-router links
self.links = self._startLinks()
# Used internally for the logs
self.link_to_edge_bindings = self._createLinkToEdgeBindings()
# Set log file
if logfile:
self.logfile = logfile
# Write first line with links
with open(self.logfile, 'w') as f:
f.write(self.printLinkToEdgesLine(self.cg))
else:
self.logfile = None
class LinksMonitor(object):
"""
Implements the class.
"""
def __init__(self, interval=1, logfile = dconf.LinksMonitor_LogFile):
self.db = DatabaseHandler()
log.info("LINKS MONITOR -- interval: %s -- logfile: %s --\n"%(str(interval),logfile))
log.info("-"*60+"\n")
log.info("Read all edges from network...\n")
self.links = self.db.getAllEdges()
self.interval = interval
log.info("Start all counters...\n")
self.counters = self._startCounters()
self.logfile = logfile
log.info("%s\n"%self.printLinksToEdges())
def printLinksToEdges(self):
s = "Links to edges:\n"
taken = []
for link, data in self.links.iteritems():
(x, y) = data['edge']
if (x,y) in taken or (y,x) in taken:
continue
if not('r' in x and 'r' in y):
continue
taken.append((x,y))
s += link+' -> '+str(data['edge'])+'\n'
s += '\n\n'
return s
def printLinkToEdgesLine(self):
s = ""
taken = []
for link, data in self.links.iteritems():
(x, y) = data['edge']
if (x,y) in taken or (y,x) in taken:
continue
taken.append((x,y))
(x,y) = data['edge']
s += link+'->(%s %s),'%(x,y)
s += '\n'
return s
def __str__(self):
s = ""
taken = []
for link, data in self.links.iteritems():
(x, y) = data['edge']
if (x,y) in taken or (y,x) in taken:
continue
taken.append((x,y))
s += "%s %s -> load: (%.2f%%)\n"%(link, data['edge'], (100*data['load'])/data['bw'])
s += '\n'
return s
def log(self):
"""This function logs the state of the links. f is supposed to be an
open python file with write access
"""
f = open(self.logfile, 'a')
s = "%s"%time.time()
taken = []
for link, data in self.links.iteritems():
(x, y) = data['edge']
if (x,y) in taken or (y,x) in taken:
continue
taken.append((x,y))
load = data['load']
s += ",(%s %.3f%%)"%(link, load)
s += '\n'
f.write(s)
f.close()
def run(self):
"""
"""
log.info("Going inside the run() loop...\n")
# Write edges info to log file (first line)
f = open(self.logfile, 'a')
f.write(self.printLinkToEdgesLine())
f.close()
while True:
# Update links with fresh data from the counters
self.updateLinks()
#log.info("Links updated...\n")
# Log new values to logfile
#log.info("Logging...\n")
self.log()
# Go to sleep for some interval time
#log.info("Going to sleep...\n")
time.sleep(self.interval/2)
def _startCounters(self):
start = time.time()
routers = self.db.getRouters()
counters_dict = {name:{'routerid':rid, 'counter': SnmpCounters(routerIp=rid)} for name, rid in routers}
if time_info:
log.info("linksmonitor.py: _startCounters() took %d seconds\n"%(time.time()-start))
return counters_dict
def _updateCounters(self):
"""Reads all counters of the routers in the network. Blocks until the
counters have been updated.
"""
start = time.time()
for r, data in self.counters.iteritems():
counter = data['counter']
while (counter.fromLastLecture() < self.interval):
pass
counter.updateCounters32()
if time_info:
log.info("linksmonitor.py: _updateCounters() took %d seconds\n"%(time.time()-start))
def _setLinkLoad(self, iface_name, load):
name = [name for name, data in self.links.iteritems() if
data['interface'] == iface_name]
if name != []:
name = name[0]
self.links[name]['load'] = load
def updateLinks(self):
# Update the counters first
start = time.time()
self._updateCounters()
log.info("%s\n"%str(self.links))
# Iterate the counters
for name, data in self.counters.iteritems():
# Get the counter object for each router
counter = data['counter']
# Get the router id for the counter
routerid = counter.routerIp
# Get ifaces name and load for each router interface
iface_names = [data['name'] for data in counter.interfaces]
loads = counter.getLoads()
elapsed_time = counter.timeDiff
bandwidths = []
for ifacename in iface_names:
bw_tmp= [d['bw'] for link, d in
self.links.iteritems() if d['interface']
== ifacename]
if bw_tmp != []:
bandwidths.append(bw_tmp[0])
bandwidths = np.asarray(bandwidths)
currentPercentages = np.multiply(loads/(np.multiply(bandwidths, elapsed_time)), 100)
#log.info("Elapsed time: %s\n"%elapsed_time)
#log.info("Loads: %s\n"%str(loads))
#log.info("Bws: %s\n"%str(bandwidths))
# Set link loads by interface name
for i, iface_name in enumerate(iface_names):
iface_load = currentPercentages[i]
self._setLinkLoad(iface_name, iface_load)
if time_info:
log.info("linksmonitor.py: updateLinks() took %d seconds\n"%(time.time()-start))
def __init__(self, congestionThreshold = 0.95):
"""It basically reads the network topology from the MyGraphProvider,
which is running in another thread because
SouthboundManager.run() is blocking.
Here we are assuming that the topology does not change.
"""
# Dictionary that keeps the allocation of the flows in the network paths
self.flow_allocation = {}
# {prefixA: {flow1 : [path_list], flow2 : [path_list]},
# prefixB: {flow4 : [path_list], flow3 : [path_list]}}
# Lock to make flow_allocation thread-safe
self.flowAllocationLock = threading.Lock()
# From where to read events
self.eventQueue = eventQueue
# Used to schedule flow alloc. removals
self.thread_handlers = {}
# Data structure that holds the current forwarding dags for
# all advertised destinations in the network
self.dagsLock = threading.Lock()
self.dags = {}
# Set the congestion threshold
self.congestionThreshold = congestionThreshold
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Congestion Threshold is set to %.2f%% of the link\n"%(t, (self.congestionThreshold)*100.0))
# Used to stop the thread
self._stop = threading.Event()
# Object that handles the topology database
self.db = DatabaseHandler()
# Connects to the southbound controller. Must be called before
# create instance of SouthboundManager
CFG.read(dconf.C1_Cfg)
# Start the Southbound manager in a different thread.
self.sbmanager = MyGraphProvider()
t = threading.Thread(target=self.sbmanager.run, name="Graph Listener")
t.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Graph Listener thread started\n"%t)
# Blocks until initial graph arrived notification is received
# from southbound manager
HAS_INITIAL_GRAPH.wait()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial graph received\n"%t)
# Retreieve network graph from southbound manager
self.network_graph = self.sbmanager.igp_graph
# Mantains the list of the network prefixes advertised by the OSPF routers
self.ospf_prefixes = self._fillInitialOSPFPrefixes()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial OSPF prefixes read\n"%t)
# Include BW data inside the initial graph.
n_router_links = self._countRouter2RouterEdges()
self._readBwDataFromDB()
i = 0
while not self._bwInAllRouterEdges(n_router_links):
i += 1
time.sleep(1)
self._readBwDataFromDB()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Bandwidths written in network_graph after %d iterations\n"%(t,i))
# Read the initial graph. We keep this as a copy of the
# physical topology. In initial graph, the instantaneous
# capacities of the links are kept.
self.initial_graph = self.network_graph.copy()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Created IP-names bindings\n"%t)
log.info("\tHostname\tip\tsubnet\n")
for name, data in self.db.hosts_to_ip.iteritems():
log.info("\t%s\t%s\t%s\n"%(name, data['iface_host'], data['iface_router']))
log.info("\tRouter name\tip\t\n")
for name, ip in self.db.routers_to_ip.iteritems():
log.info("\t%s\t%s\n"%(name, ip))
# Create here the initial DAGS for each destination in the
# network
self._createInitialDags()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial DAGS created\n"%t)
# Spawn Json listener thread
jl = JsonListener(self.eventQueue)
jl.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Json listener thread created\n"%t)
# Create attributes
self.feedbackRequestQueue = feedbackRequestQueue
self.feedbackResponseQueue = feedbackResponseQueue
# Dict in which we save flows pending for allocation feedback
self.pendingForFeedback = {}
# Spawn FeedbackThread
ft = feedbackThread(self.feedbackRequestQueue, self.feedbackResponseQueue)
ft.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - feedbackThread started\n"%t)
class LBController(object):
def __init__(self, congestionThreshold = 0.95):
"""It basically reads the network topology from the MyGraphProvider,
which is running in another thread because
SouthboundManager.run() is blocking.
Here we are assuming that the topology does not change.
"""
# Dictionary that keeps the allocation of the flows in the network paths
self.flow_allocation = {}
# {prefixA: {flow1 : [path_list], flow2 : [path_list]},
# prefixB: {flow4 : [path_list], flow3 : [path_list]}}
# Lock to make flow_allocation thread-safe
self.flowAllocationLock = threading.Lock()
# From where to read events
self.eventQueue = eventQueue
# Used to schedule flow alloc. removals
self.thread_handlers = {}
# Data structure that holds the current forwarding dags for
# all advertised destinations in the network
self.dagsLock = threading.Lock()
self.dags = {}
# Set the congestion threshold
self.congestionThreshold = congestionThreshold
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Congestion Threshold is set to %.2f%% of the link\n"%(t, (self.congestionThreshold)*100.0))
# Used to stop the thread
self._stop = threading.Event()
# Object that handles the topology database
self.db = DatabaseHandler()
# Connects to the southbound controller. Must be called before
# create instance of SouthboundManager
CFG.read(dconf.C1_Cfg)
# Start the Southbound manager in a different thread.
self.sbmanager = MyGraphProvider()
t = threading.Thread(target=self.sbmanager.run, name="Graph Listener")
t.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Graph Listener thread started\n"%t)
# Blocks until initial graph arrived notification is received
# from southbound manager
HAS_INITIAL_GRAPH.wait()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial graph received\n"%t)
# Retreieve network graph from southbound manager
self.network_graph = self.sbmanager.igp_graph
# Mantains the list of the network prefixes advertised by the OSPF routers
self.ospf_prefixes = self._fillInitialOSPFPrefixes()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial OSPF prefixes read\n"%t)
# Include BW data inside the initial graph.
n_router_links = self._countRouter2RouterEdges()
self._readBwDataFromDB()
i = 0
while not self._bwInAllRouterEdges(n_router_links):
i += 1
time.sleep(1)
self._readBwDataFromDB()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Bandwidths written in network_graph after %d iterations\n"%(t,i))
# Read the initial graph. We keep this as a copy of the
# physical topology. In initial graph, the instantaneous
# capacities of the links are kept.
self.initial_graph = self.network_graph.copy()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Created IP-names bindings\n"%t)
log.info("\tHostname\tip\tsubnet\n")
for name, data in self.db.hosts_to_ip.iteritems():
log.info("\t%s\t%s\t%s\n"%(name, data['iface_host'], data['iface_router']))
log.info("\tRouter name\tip\t\n")
for name, ip in self.db.routers_to_ip.iteritems():
log.info("\t%s\t%s\n"%(name, ip))
# Create here the initial DAGS for each destination in the
# network
self._createInitialDags()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Initial DAGS created\n"%t)
# Spawn Json listener thread
jl = JsonListener(self.eventQueue)
jl.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Json listener thread created\n"%t)
# Create attributes
self.feedbackRequestQueue = feedbackRequestQueue
self.feedbackResponseQueue = feedbackResponseQueue
# Dict in which we save flows pending for allocation feedback
self.pendingForFeedback = {}
# Spawn FeedbackThread
ft = feedbackThread(self.feedbackRequestQueue, self.feedbackResponseQueue)
ft.start()
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - feedbackThread started\n"%t)
def run(self):
"""Main loop that deals with new incoming events
"""
while not self.isStopped():
# Get event from the queue (blocking)
event = self.eventQueue.get()
log.info(lineend)
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - run(): NEW event in the queue\n"%t)
log.info("\t* Type: %s\n"%event['type'])
if event['type'] == 'newFlowStarted':
# Fetch flow from queue
flow = event['data']
log.info("\t* Flow: %s\n"%self.toLogFlowNames(flow))
# We assume that upon dealing with a new flow, the
# self.dags is not accessed by any other thread
with self.dagsLock:
with self.flowAllocationLock:
# Deal with new flow
self.dealWithNewFlow(flow)
else:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - run(): UNKNOWN Event\n"%t)
log.info("\t* Event: "%str(event))
def dealWithNewFlow(self, flow):
"""Called when a new flow arrives. This method should be overwritten
by each of the subclasses performing the various algorithms.
When this function is called, no algorithm to allocate flows
is called. The LBController only keeps track of the default
allocations of the flows.
"""
# In general, this won't be True that often...
ecmp = False
# Get the communicating interfaces
src_iface = flow['src']
dst_iface = flow['dst']
# Get host ip's
src_ip = src_iface.ip
dst_ip = dst_iface.ip
# Get their correspoding networks
src_network = src_iface.network
dst_network = self.getCurrentOSPFPrefix(dst_iface.compressed)
# Get the string-type prefixes
src_prefix = src_network.compressed
dst_prefix = dst_network.compressed
# Get the current path from source to destination
currentPaths = self.getActivePaths(src_iface, dst_iface, dst_prefix)
if len(currentPaths) > 1:
# ECMP is happening
ecmp = True
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - dealWithNewFlow(): ECMP is ACTIVE\n"%t)
elif len(currentPaths) == 1:
ecmp = False
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - dealWithNewFlow(): ECMP is NOT active\n"%t)
else:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - dealWithNewFlow(): ERROR\n"%t)
# Detect if flow is going to create congestion
if self.canAllocateFlow(flow, currentPaths):
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - dealWithNewFlow(): Flow can be ALLOCATED\n"%t)
else:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - dealWithNewFlow(): Flow will cause CONGESTION\n"%t)
# We just allocate the flow to the currentPaths
self.addAllocationEntry(dst_prefix, flow, currentPaths)
def stop(self):
"""Stop the LBController correctly
"""
#Here we should deal with the handlers of the spawned threads
#and subprocesses...
self._stop.set()
def isStopped(self):
"""Check if LBController is set to be stopped or not
"""
return self._stop.isSet()
def _readBwDataFromDB(self):
"""Introduces BW data from /tmp/db.topo into the network DiGraph and
sets the capacity to the link bandwidth.
"""
for (x, y, data) in self.network_graph.edges(data=True):
if 'C' in x or 'C' in y: # means is the controller...
continue
if self.network_graph.is_router(x) and self.network_graph.is_router(y):
# Fill edges between routers only!
xname = self.db.getNameFromIP(x)
yname = self.db.getNameFromIP(y)
if xname and yname:
try:
bw = self.db.interface_bandwidth(xname, yname)
data['bw'] = int(bw*1e6)
data['capacity'] = int(bw*1e6)
data['mincap'] = (1-self.congestionThreshold)*(bw*1e6)
except:
import ipdb; ipdb.set_trace()
print "EXCEPTION"
print x,y
print xname, yname
else:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - _readBwDataFromDB(): ERROR: did not find %s (%s) and %s (%s)\n"%(t, x, xname, y, yname))
def _countRouter2RouterEdges(self):
"""
Counts how many unidirectional links between routers exist in the network
"""
routers = [n for (n, data) in self.db.network.iteritems() if data['type'] == 'router']
edges_count = 0
for r in routers:
data = self.db.network[r]
for n, d in data.iteritems():
if type(d) == dict:
try:
self.db.routerid(n)
except TypeError:
pass
else:
edges_count +=1
return edges_count
def _countWrittenBw(self):
ep = [1 if 'capacity' in data.keys() and 'bw' in
data.keys() else 0 for (x, y, data) in
self.network_graph.edges(data=True) if
self.network_graph.is_router(x) and
self.network_graph.is_router(y)]
return sum(ep)
def _bwInAllRouterEdges(self, n_router_links):
current_count = self._countWrittenBw()
return current_count == n_router_links and current_count != 0
def _fillInitialOSPFPrefixes(self):
"""
Fills up the data structure
"""
prefixes = []
for prefix in self.network_graph.prefixes:
prefixes.append(ipaddress.ip_network(prefix))
return prefixes
def getCurrentOSPFPrefix(self, interface_ip):
"""Given a interface ip address of a host in the mininet network,
returns the longest prefix currently being advertised by the
OSPF routers.
:param interface_ip: string representing a host's interface ip
address. E.g: '192.168.233.254/30'
Returns: an ipaddress.IPv4Network object
"""
iface = ipaddress.ip_interface(interface_ip)
iface_nw = iface.network
iface_ip = iface.ip
longest_match = (None, 0)
for prefix in self.ospf_prefixes:
prefix_len = prefix.prefixlen
if iface_ip in prefix and prefix_len > longest_match[1]:
longest_match = (prefix, prefix_len)
return longest_match[0]
def getCurrentDag(self, dst):
"""
Returns a copy of the current DAG towards destination
"""
return self.dags[dst].copy()
def getInitialDag(self, dst):
currentDag = self.getCurrentDag(dst)
initialDag = currentDag.copy()
# set fibbed edges to notactive and default-ones to active
for (u, v, data) in currentDag.edges(data=True):
if data['fibbed'] == True:
initialDag.get_edge_data(u,v)['active'] = False
else:
initialDag.get_edge_data(u,v)['active'] = True
return initialDag
def setCurrentDag(self, dst, dag):
"""
Sets the current DAG towards destination
"""
self.dags[dst] = dag
def getActiveEdges(self, dag, node):
activeEdges = []
for n, data in dag[node].iteritems():
if data['active'] == True:
activeEdges.append((node, n))
return activeEdges
def getFibbedEdges(self, dag, node):
"""
Returns the fibbed edges in the
"""
fibbedEdges = []
for n, data in dag[node].iteritems():
if data['fibbed'] == True:
fibbedEdges.append((node, n))
return fibbedEdges
def getDefaultEdges(self, dag, node):
"""Returns the list of edges from node that are used by default in
OSPF"""
defaultEdges = []
for n, data in dag[node].iteritems():
if data['fibbed'] == False:
defaultEdges.append((node, n))
return defaultEdges
def switchDagEdgesData(self, dag, path_list, **kwargs):
"""Sets the data of the edges in path_list to the attributes expressed
in kwargs.
:param dag: nx.DiGraph representing the dag of the destination
subnet that we want to change the edges state.
:param path_list: list of paths. E.g: [[A,B,C],[A,G,C]...]
:param **kwargs: Edge attributes to be set.
"""
# Check first if we have a path_list or a edges_list
if path_list != [] and isinstance(path_list[0], tuple):
# We have an edges list
edge_list = path_list
elif path_list != [] and isinstance(path_list[0], list):
# We have a path_list
edge_list = self.getEdgesFromPathList(path_list)
if path_list != []:
for (u,v) in edge_list:
if (u,v) not in dag.edges():
# The initial edges will never get the fibbed
# attribute set to True, since they exist in the dag
# from the beginning.
dag.add_edge(u,v)
edge_data = dag.get_edge_data(u,v)
dag.get_edge_data(u,v)['fibbed'] = True
# Do for all edges
edge_data = dag.get_edge_data(u,v)
for key, value in kwargs.iteritems():
edge_data[key] = value
# Return modified dag when finished
return dag
def getActiveDag(self, dst):
"""Returns the DAG being currently deployed in practice for the given
destination.
"""
dag = self.dags[dst]
active_dag = dag.copy()
action = [active_dag.remove_edge(u,v) for (u,v, data) in
active_dag.edges(data=True) if data['active'] == False]
return active_dag
def getActivePaths(self, src_iface, dst_iface, dst_prefix):
"""Returns the current active path between two host interface ips and
the destination prefix for which we want to retrieve the
current active path.
:param src_iface, dst_iface: ipaddres.ip_interface object
:param dst_prefix: string representing the destination prefix
(i.e: 192.168.225.0/25).
"""
# Get current active DAG for that destination
active_dag = self.getActiveDag(dst_prefix)
# Get src_iface and dst_iface attached routers
routers = list(self.network_graph.routers)
src_rid = None
dst_rid = None
for r in routers:
if self.network_graph.has_successor(r, src_iface.network.compressed):
d = src_iface.network.compressed
if self.network_graph[r][d]['fake'] == False:
src_rid = r
if self.network_graph.has_successor(r, dst_iface.network.compressed):
d = dst_iface.network.compressed
if self.network_graph[r][d]['fake'] == False:
dst_rid = r
if src_rid and dst_rid:
# Calculate path and return it
active_paths = self._getAllPathsLimDAG(active_dag, src_rid, dst_rid, 0)
return active_paths
else:
t = time.strftime("%H:%M:%S", time.gmtime())
to_print = "%s - getActivePaths(): No paths could be found between %s and %s for subnet prefix %s\n"
log.info(to_print%(t, str(src_iface), str(dst_iface), dst_prefix))
return [[]]
def _createInitialDags(self):
"""Populates the self.dags attribute by creating a complete DAG for
each destination. In other words, a DAG representing
all-shortest paths from any router in the network towards each
destination.
"""
# Log it
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Creating initial DAGs\n"%t)
pairs_already_logged = []
apdp = nx.all_pairs_dijkstra_path(self.initial_graph, weight='metric')
for prefix in self.network_graph.prefixes:
dag = nx.DiGraph()
# Get IP of the connected router
cr = [r for r in self.network_graph.routers if self.network_graph.has_successor(r, prefix)][0]
# Get subnet prefix
subnet_prefix = prefix
other_routers = [rn for rn in self.network_graph.routers if rn != cr]
for r in other_routers:
# Get the shortest path
dpath = apdp[r][cr]
# Are there possibly more paths with the same cost? Let's check:
# Get length of the default dijkstra shortest path
dlength = self.getPathLength(dpath)
# Get all paths with length equal to the defaul path length
default_paths = self._getAllPathsLim(self.initial_graph, r, cr, dlength)
if len(default_paths) > 1:
# ECMP is happening
ecmp = True
if (cr, r) not in pairs_already_logged and (r, cr) not in pairs_already_logged:
to_print = "\tECMP is ACTIVE between %s and %s. There are %d paths with equal cost of %d\n"
log.info(to_print%(self.db.getNameFromIP(cr), self.db.getNameFromIP(r), len(default_paths), dlength))
pairs_already_logged.append((cr, r))
elif len(default_paths) == 1:
ecmp = False
default_paths = [dpath]
else:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - _createInitialDags(): ERROR. At least there should be a path\n"%t)
# Iterate through paths and add edges to DAG
for path in default_paths:
edge_list = zip(path[:-1], path[1:])
for (u,v) in edge_list:
if self.network_graph.is_router(u) and self.network_graph.is_router(v):
dag.add_edge(u,v)
edge_data = dag.get_edge_data(u,v)
edge_data['active'] = True
edge_data['fibbed'] = False
edge_data['default'] = True
edge_data['ongoing_flows'] = False
# Add DAG to prefix
self.dags[subnet_prefix] = dag
def getEdgesFromPathList(self, path_list):
"""Given a list of paths, returns a list of all the edges contained
in these paths.
"""
edge_list = []
for path in path_list:
edge_list += zip(path[:-1], path[1:])
return edge_list
def isFibbed(self, dst_prefix):
"""Returns true if there exist fake LSA for that prefix in the
network.
TODO: probably must be changed...
"""
return (self.getLiesFromPrefix(dst_prefix) != [])
def isFibbedPath(self, dst_prefix, path):
"""Returns True if it finds a fibbed edge active along the path in
dst_prefix DAG
"""
currentDag = self.getCurrentDag(dst_prefix)
for (u,v) in zip(path[:-1], path[1:]):
edge_data = currentDag.get_edge_data(u,v)
if edge_data['fibbed'] == True and edge_data['active'] == True:
# Fake edge found
return True
return False
def addAllocationEntry(self, prefix, flow, path_list):
"""Add entry in the flow_allocation table.
:param prefix: destination prefix. Expressed as an
IPv4Interface object
:param path_list: List of paths for which this flow will be
multi-pathed towards destination prefix:
[[A, B, C], [A, D, C]]"""
if prefix not in self.flow_allocation.keys():
# prefix not in table
self.flow_allocation[prefix] = {flow : path_list}
else:
self.flow_allocation[prefix][flow] = path_list
# Loggin a bit...
t = time.strftime("%H:%M:%S", time.gmtime())
to_print = "%s - flow ALLOCATED to Paths\n"
log.info(to_print%t)
log.info("\t* Dest_prefix: %s\n"%prefix)
log.info("\t* Paths (%s): %s\n"%(len(path_list), str([self.toLogRouterNames(path) for path in path_list])))
log.info("\t* Flow: %s\n"%self.toLogFlowNames(flow))
# Current dag for destination
current_dag = self.getCurrentDag(prefix)
# Iterate the paths
for path in path_list:
# Calculate paths with only routers
path_only_routers = [p for p in path if self.network_graph.is_router(p)]
# Extract the edges of the path
edges = zip(path_only_routers[:-1], path_only_routers[1:])
# Modify first the current destination dag: ongoing_flows = True
current_dag = self.switchDagEdgesData(current_dag, edges, ongoing_flows=True)
# Set the current dag
self.setCurrentDag(prefix, current_dag)
# Define the removeAllocatoinEntry thread
t = threading.Thread(target=self.removeAllocationEntry, args=(prefix, flow))
# Start the thread
t.start()
# Add handler to list and start thread
self.thread_handlers[flow] = t
def removeAllocationEntry(self, prefix, flow):
"""
Removes the flow from the allocation entry prefix and restores the corresponding.
"""
# Wait until flow finishes
time.sleep(flow['duration'])
# Acquire locks for self.flow_allocation and self.dags
# dictionaries
self.flowAllocationLock.acquire()
self.dagsLock.acquire()
log.info(lineend)
if prefix not in self.flow_allocation.keys():
# prefix not in table
raise KeyError("The is no such prefix allocated: %s"%str(prefix))
else:
if flow in self.flow_allocation[prefix].keys():
path_list = self.flow_allocation[prefix].pop(flow, None)
else:
raise KeyError("%s is not alloacated in this prefix %s"%str(repr(flow)))
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Flow REMOVED from Paths\n"%t)
log.info("\t* Dest_prefix: %s\n"%prefix)
log.info("\t* Paths (%s): %s\n"%(len(path_list), str([self.toLogRouterNames(path) for path in path_list])))
log.info("\t* Flow: %s\n"%self.toLogFlowNames(flow))
# Check first how many ECMP paths are there
ecmp_paths = float(len(path_list))
# Current dag for destination
current_dag = self.getCurrentDag(prefix)
# Get the active Dag
activeDag = self.getActiveDag(prefix)
log.info("\t* removeAllocationEntry: initial DAG\n\t %s\n"%str(self.toLogDagNames(activeDag).edges()))
# Get current remaining allocated flows for destination
remaining_flows = self.getAllocatedFlows(prefix)
# Acumulate edges for which there are flows ongoing
ongoing_edge_list = []
for (f, f_path_list) in remaining_flows:
ongoing_edge_list += self.getEdgesFromPathList(f_path_list)
# Iterate the path_list
for path in path_list:
# Get paths with only routers
path_only_routers = [p for p in path if self.network_graph.is_router(p)]
# Calculate edges of the path
edges = zip(path_only_routers[:-1], path_only_routers[1:])
# Calculate which of these edges can be set to ongoing_flows = False
edges_without_flows = [(u, v) for (u, v) in edges if (u, v) not in ongoing_edge_list]
# Set them
current_dag = self.switchDagEdgesData(current_dag, edges_without_flows, ongoing_flows=False)
# Set the new calculated dag to its destination prefix dag
self.setCurrentDag(prefix, current_dag)
# Remove the lies for the given prefix
self.removePrefixLies(prefix, path_list)
# Release locks
self.flowAllocationLock.release()
self.dagsLock.release()
def removePrefixLies(self, prefix, path_list):
"""Remove lies for a given prefix only if there are no more flows
allocated for that prefix flowing through some edge of
path_list.
:param prefix: subnet prefix
:param path_list: List of paths from source to
destination. E.g: [[A,B,C],[A,D,C]]
"""
# log a bit
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Removing existing lies...\n"%t)
# Get the current DAG for that prefix
current_dag = self.getCurrentDag(prefix)
# Get the active Dag
activeDag = self.getActiveDag(prefix)
to_log = "\t* removePrefixLies: initial DAG\n\t %s\n"
log.info(to_log%str(self.toLogDagNames(activeDag).edges()))
# Check if fibbed edge in paths
thereIsFibbedPath = False
for path in path_list:
thereIsFibbedPath = thereIsFibbedPath or self.isFibbedPath(prefix, path)
if not thereIsFibbedPath:
# Paths for this flow are not fibbed
to_print = "\t* No fibbed edges found in paths %s for prefix: %s\n"
log.info(to_print%(str(self.toLogRouterNames(path_list)), prefix))
else:
# Get the lies for prefix
lsa = self.getLiesFromPrefix(prefix)
to_log = "\t* Found fibbed edges in paths: %s\n"
log.info(to_log%str(self.toLogRouterNames(path_list)))
# Fibbed prefix
# Let's check if there are other flows for prefix fist
allocated_flows = self.getAllocatedFlows(prefix)
# Check if there are flows to prefix going through some
# path in path_list. If not, we can delete the
# lies. Otherwise, we must wait.
if allocated_flows == []:
log.info("\t* No allocated flows remain for prefix\n")
# Obviously, if no flows are found, we can already
# remove the lies.
# Set the DAG for the prefix destination to its
# original version
path_list_edges = []
for path in path_list:
path_list_edges += zip(path[:-1], path[1:])
# Remove edges from initial paths
for path in path_list:
for node in path:
# Set edges to initial situation (fibbed=True,
# active=False) and (fibbed=False, active=True)
default_edges = self.getDefaultEdges(current_dag, node)
current_dag = self.switchDagEdgesData(current_dag, default_edges, active=True)
fibbed_edges = self.getFibbedEdges(current_dag, node)
current_dag = self.switchDagEdgesData(current_dag, fibbed_edges, active=False)
# Set current Dag
self.setCurrentDag(prefix, current_dag)
# Get the active Dag
activeDag = self.getActiveDag(prefix)
log.info("\t* removePrefixLies: final DAG\n\t %s\n"%str(self.toLogDagNames(activeDag).edges()))
# Get the active Dag
activeDag = self.getActiveDag(prefix)
# Force it to fibbing
self.sbmanager.add_dag_requirement(prefix, activeDag.copy())
# Log it
log.info("\t* Removed lies for prefix: %s\n"%prefix)
log.info("\t* LSAs: %s\n"%(str(lsa)))
else:
log.info("\t* Some flows for prefix still remain ongoing\n")
canRemoveLSA = True
# Collect first the edges of the paths to remove
path_edges_list = []
for path in path_list:
path_edges_list += zip(path[:-1], path[1:])
log.info("Edges of the paths to remove: %s\n"%self.toLogRouterNames(path_edges_list))
for (flow, flow_path_list) in allocated_flows:
log.info("flow: %s, path: %s\n"%(self.toLogFlowNames(flow), self.toLogRouterNames(flow_path_list)))
# Get all edges used by flows sending to same
# destination prefix
flow_edges_list = []
for flow_path in flow_path_list:
flow_edges_list += zip(flow_path[:-1], flow_path[1:])
check = [True if (u,v) in path_edges_list else False for (u,v) in flow_edges_list]
log.info("CHECK list: %s\n"%str(check))
if sum(check) > 0:
# Do not remove lsas yet. Other flows ongoing
# in one of the paths in path_list
canRemoveLSA = False
break
if canRemoveLSA == False:
# Just log it
flows = [f for (f, p) in allocated_flows]
to_print = "\t* Lies for prefix %s not removed. Flows yet ongoing:\n"
log.info(to_print%prefix)
for f in flows:
log.info("\t\t%s\n"%(self.toLogFlowNames(f)))
else:
# Set the DAG for the prefix destination to its
# original version
path_list_edges = []
for path in path_list:
path_list_edges += zip(path[:-1], path[1:])
# Remove edges from initial paths
for path in path_list:
for node in path:
# Set edges to initial situation (fibbed=True,
# active=False) and (fibbed=False, active=True)
default_edges = self.getDefaultEdges(current_dag, node)
current_dag = self.switchDagEdgesData(current_dag, default_edges, active=True)
fibbed_edges = self.getFibbedEdges(current_dag, node)
current_dag = self.switchDagEdgesData(current_dag, fibbed_edges, active=False)
self.setCurrentDag(prefix, current_dag)
# Get the active Dag
activeDag = self.getActiveDag(prefix)
# Force it to fibbing
self.sbmanager.add_dag_requirement(prefix, activeDag.copy())
# Log it
log.info("\t* Removed lies for prefix: %s\n"%prefix)
log.info("\t* LSAs: %s\n"%(str(lsa)))
log.info(lineend)
def getDefaultDijkstraPath(self, network_graph, flow):
"""Returns an list of network nodes representing the default Dijkstra
path given the flow and a network graph.
"""
# We assume here that Flow is well formed, and that the
# interface addresses of the hosts are given.
src_name = self.db.getNameFromIP(flow['src'].compressed)
src_router_name, src_router_id = self.db.getConnectedRouter(src_name)
dst_network = flow['dst'].network.compressed
# We take only routers in the route
route = nx.dijkstra_path(network_graph, src_router_id, dst_network, weight='metric')
return route
def getPathLength(self, path):
"""Given a path as a list of traversed routers, it returns the sum of
the weights of the traversed links along the path.
"""
routers = [n for n in path if self.initial_graph.is_router(n)]
edges = [self.initial_graph.get_edge_data(u,v)['metric'] for
(u,v) in zip(path[:-1], path[1:])]
return sum(edges)
def canAllocateFlow(self, flow, path_list):
"""Returns true if there is at least flow.size bandwidth available in
all links along the path (or multiple paths in case of ECMP)
from flow.src to src.dst,
"""
for path in path_list:
if self.getMinCapacity(path) < flow.size:
return False
return True
def getMinCapacity(self, path):
"""Returns the minimum capacity of the edges along the path.
:param path: List of network nodes defining a path [A, B, C, D]"""
caps_in_path = []
for (u,v) in zip(path[:-1], path[1:]):
edge_data = self.initial_graph.get_edge_data(u, v)
cap = edge_data.get('capacity', None)
caps_in_path.append(cap)
try:
mini = min(caps_in_path)
return mini
except ValueError:
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - getMinCapacity(): ERROR: min could not be calculated\n"%t)
log.info("\t* Path: %s\n"%path)
raise ValueError
def getMinCapacityEdge(self, path):
"""Returns the edge with the minimum capacity along the path.
:param path: List of network nodes defining a path [A, B, C,
D]
"""
edges_in_path = [((path[i], path[i+1]),
self.initial_graph.get_edge_data(path[i],
path[i+1])['capacity']) for i in
range(len(path)-1) if 'capacity' in
self.initial_graph.get_edge_data(path[i],
path[i+1]).keys()]
if edges_in_path:
minim_c = edges_in_path[0][1]
minim_edge = edges_in_path[0][0]
for ((x,y), c) in edges_in_path:
if c < minim_c:
minim_c = c
minim_edge = (x,y)
return minim_edge
else:
raise StandardError("%s has no edges!"%str(path))
def getAllocatedFlows(self, prefix):
"""
Given a prefix, returns a list of tuples:
[(flow, path), (flow, path), ...]
"""
if prefix in self.flow_allocation.keys():
return [(f, p) for f, p in self.flow_allocation[prefix].iteritems()]
else:
t = time.strftime("%H:%M:%S", time.gmtime())
to_print = "%s - getAllocatedFlows(): WARNING: "
to_print += "prefix %s not yet in flow_allocation table\n"
#log.info(to_print%(t, prefix))
return []
def getFlowSizes(self, prefix):
"""Returns the sum of flows with destination prefix, and how many
flows there are
"""
allocated_flows = self.getAllocatedFlows(prefix)
sizes = [f['size'] for (f, p) in allocated_flows]
return sum(a), len(a)
def getLiesFromPrefix(self, prefix):
"""Retrieves the LSA of the associated prefix from the southbound
manager.
"""
lsa_set = self.sbmanager.advertized_lsa.copy()
lsa_list = []
while lsa_set != set():
lsa = lsa_set.pop()
dst = lsa.dest
if prefix == dst:
lsa_list.append(lsa)
return lsa_list
def getNetworkWithoutFullEdges(self, network_graph, flow_size):
"""Returns a nx.DiGraph representing the network graph without the
edge that can't allocate a flow of flow_size.
:param network_graph: IGPGraph representing the network.
:param flow_size: Attribute of a flow defining its size (in bytes).
"""
ng_temp = network_graph.copy()
for (x, y, data) in network_graph.edges(data=True):
cap = data.get('capacity')
if cap and cap <= flow_size and self.network_graph.is_router(x) and self.network_graph.is_router(y):
edge = (x, y)
ng_temp.remove_edge(x, y)
return ng_temp
def getAllPathsRanked(self, igp_graph, start, end, ranked_by='length'):
"""Recursive function that returns an ordered list representing all
paths between node x and y in network_graph. Paths are ordered
in increasing length.
:param igp_graph: IGPGraph representing the network
:param start: router if of source's connected router
:param end: compressed subnet address of the destination
prefix."""
paths = self._getAllPathsLim(igp_graph, start, end, 0)
if ranked_by == 'length':
ordered_paths = self._orderByLength(paths)
elif ranked_by == 'capacity':
ordered_paths = self._orderByCapacityLeft(paths)
return ordered_paths
def _getAllPathsLim(self, igp_graph, start, end, k, path=[], len_path=0, die=False):
"""Recursive function that finds all paths from start node to end
node with maximum length of k.
"""
if die == False:
# Accumulate path length first
if path == []:
len_path = 0
else:
last_node = path[-1]
len_path += igp_graph.get_edge_data(last_node, start)['metric']
# Accumulate nodes in path
path = path + [start]
if start == end:
# Arrived to the end. Go back returning everything
if k == 0:
return [path]
elif len_path < k+1:
return [path]
else:
self._getAllPathsLim(igp_graph, start, end, k, path=path, len_path=len_path, die=True)
if not start in igp_graph:
return []
paths = []
for node in igp_graph[start]:
if node not in path: # Ommiting loops here
if k == 0:
# If we do not want any length limit
newpaths = self._getAllPathsLim(igp_graph, node, end, k, path=path, len_path=len_path)
for newpath in newpaths:
paths.append(newpath)
elif len_path < k+1:
newpaths = self._getAllPathsLim(igp_graph, node, end, k, path=path, len_path=len_path)
for newpath in newpaths:
paths.append(newpath)
return paths
else:
# Recursive call dies here
pass
def _getAllPathsLimDAG(self, dag, start, end, k, path=[]):
"""Recursive function that finds all paths from start node to end node
with maximum length of k.
If the function is called with k=0, returns all existing
loopless paths between start and end nodes.
:param dag: nx.DiGraph representing the current paths towards
a certain destination.
:param start, end: string representing the ip address of the
star and end routers (or nodes) (i.e:
10.0.0.3).
:param k: specified maximum path length (here means hops,
since the dags do not have weights).
"""
# Accumulate nodes in path
path = path + [start]
if start == end:
# Arrived to the end. Go back returning everything
return [path]
if not start in dag:
return []
paths = []
for node in dag[start]:
if node not in path: # Ommiting loops here
if k == 0:
# If we do not want any length limit
newpaths = self._getAllPathsLimDAG(dag, node, end, k, path=path)
for newpath in newpaths:
paths.append(newpath)
elif len(path) < k+1:
newpaths = self._getAllPathsLimDAG(dag, node, end, k, path=path)
for newpath in newpaths:
paths.append(newpath)
return paths
def _orderByLength(self, paths):
"""Given a list of arbitrary paths. It ranks them by lenght (or total
edges weight).
"""
# Search for path lengths
ordered_paths = []
for path in paths:
pathlen = 0
for (u,v) in zip(path[:-1], path[1:]):
if self.network_graph.is_router(v):
pathlen += self.network_graph.get_edge_data(u,v)['metric']
ordered_paths.append((path, pathlen))
# Now rank them
ordered_paths = sorted(ordered_paths, key=lambda x: x[1])
return ordered_paths
def _orderByCapacityLeft(self, paths):
"""Given a list of arbitrary paths. It ranks them by capacity left (or
total edges weight).
Function is implemented in TEControllerLab1
"""
pass
def toLogDagNames(self, dag):
"""
"""
dag_to_print = nx.DiGraph()
for (u,v, data) in dag.edges(data=True):
u_temp = self.db.getNameFromIP(u)
v_temp = self.db.getNameFromIP(v)
dag_to_print.add_edge(u_temp, v_temp, **data)
return dag_to_print
def toLogRouterNames(self, path_list):
"""
"""
total = []
if isinstance(path_list[0], list):
for path in path_list:
r = [self.db.getNameFromIP(p) for p in path if self.network_graph.is_router(p)]
total.append(r)
return total
elif isinstance(path_list[0], tuple):
r = [(self.db.getNameFromIP(u),
self.db.getNameFromIP(v)) for (u,v) in path_list
if self.network_graph.is_router(u) and self.network_graph.is_router(v)]
return r
else:
return [self.db.getNameFromIP(p) for p in path_list if self.network_graph.is_router(p)]
def toLogFlowNames(self, flow):
a = "Flow[(%s -> %s): %s, t_o: %s, duration: %s]"
return a%(self.db.getNameFromIP(flow.src.compressed),
self.db.getNameFromIP(flow.dst.compressed),
flow.setSizeToStr(flow.size),
flow.setTimeToStr(flow.start_time),
flow.setTimeToStr(flow.duration))
class feedbackThread(threading.Thread):
"""
"""
def __init__(self, requestQueue, responseQueue):
super(feedbackThread, self).__init__()
# Create queue attributes
self.requestQueue = requestQueue
self.responseQueue = responseQueue
# Read network database
self.db = DatabaseHandler()
# Fill router cap files
self.capFilesDict = self.pickCapFiles()
# Data structure that maintains a set of current flows passing
# through each router in the last second
self.router_flowsets = {}
self.updateRouterFlowSets()
def run(self):
"""
A dictionary of flow -> possible path list is read from the requestQueue.
A dictionary indexed by flow -> allocated path is returned
"""
queueLookupPeriod = 2 #seconds
while True:
try:
requestFlowsDict = self.requestQueue.get(timeout=queueLookupPeriod) # Blocking read
except:
# Update flow sets for each router
self.updateRouterFlowSets()
else:
#log.info("*** FEEDBACK REQUEST RECEIVED:\n")
#log.info(" %s\n"%str(requestFlowsDict))
self.updateRouterFlowSets()
responsePathDict = self.dealWithRequest(requestFlowsDict)
if responsePathDict != {}:
self.responseQueue.put(responsePathDict)
def updateRouterFlowSets(self):
for rid, capfile in self.capFilesDict.iteritems():
lines = capfile.readlines()
# Create new empty set
ridSet = set()
for line in lines:
try:
# Parse ip's
src_tmp = line.split(' ')[2]
src_ip_tmp = src_tmp.split('.')[:4]
src_ip = ipaddress.ip_address('.'.join(map(str, src_ip_tmp)))
dst_tmp = line.split(' ')[4].strip(':')
dst_ip_tmp = dst_tmp.split('.')[:4]
dport = dst_tmp.split('.')[4]
dst_ip = ipaddress.ip_address('.'.join(map(str, dst_ip_tmp)))
ridSet.update({((src_ip, 's'), (dst_ip, 'd'), dport)})
except:
pass
# Add set into dictionary
self.router_flowsets[rid] = ridSet
def dealWithRequest(self, requestFlowsDict):
"""
"""
# Results are saved here
responsePathDict = {}
start_time = time.time()
for f, pl in requestFlowsDict.iteritems():
#flowsSet.update({(f.src, f.sport, f.dst, f.dport)})
# We can't fix the source port from iperf client, so it
# will never match. This implies that same host can't same
# two UDP flows to the same destination host.
flowSet = set()
flowSet.update({((f.src.ip, 's'), (f.dst.ip, 'd'), str(f.dport))})
# Set of routers containing flow
routers_containing_flow = {self.db.getIpFromHostName(rid) for rid, rset in
self.router_flowsets.iteritems() if
rset.intersection(flowSet) != set()}
#log.info("*** SEARCHING:\n")
#log.info(" - %s\n"%f)
#log.info(" - %s\n"%str(list(routers_containing_flow)))
# Iterate path list and choose which of them is the one in
# which the flow is allocated
pathSetList = [(p, set(p)) for p in pl]
# Retrieve path that matches
chosen_path = [(p, pset) for (p, pset) in pathSetList if pset == routers_containing_flow]
if len(chosen_path) == 1:
responsePathDict[f] = chosen_path[0][0]
elif len(chosen_path) == 0:
pass
else:
log.info("*** FEEDBACK THREAD ERROR\n")
return responsePathDict
def pickCapFiles(self):
"""
Returns a dictionary indexed by router id -> corresponding .cap file
"""
return {rid: open(dconf.CAP_Path+rid+'.cap', 'r') for rid in self.db.routers_to_ip.keys()}
class LinksMonitorThread(threading.Thread):
"""This class defines a thread that will be spawned by the TEController
algorithm in order to periodically update the available capacities
for the network links.
It is passed a capacity graph and a lock from its parent, and it
modifies it periodically.
"""
def __init__(self, capacity_graph, lock, logfile, median_filter=False, interval=1.01):
super(LinksMonitorThread, self).__init__()
# Read network database
self.db = DatabaseHandler()
# Lock object to access capacity graph
self.lock = lock
# Counters read interval
self.interval = interval
# Capacity graph object
self.cg = capacity_graph
# Dictionary that holds the binding between router id and the
# router ip in the control network
self.ip_to_control = {}
# Start router counters
self.counters = self._startCounters()
# Perform median filter or not?
self.median_filter = median_filter
# Start router-to-router links
self.links = self._startLinks()
# Used internally for the logs
self.link_to_edge_bindings = self._createLinkToEdgeBindings()
# Set log file
if logfile:
self.logfile = logfile
# Write first line with links
with open(self.logfile, 'w') as f:
f.write(self.printLinkToEdgesLine(self.cg))
else:
self.logfile = None
def _createLinkToEdgeBindings(self):
bindings = {}
taken = []
i = 0
for (u, v) in self.cg.edges():
#if (u, v) in taken or (v, u) in taken:
# continue
#else:
#taken.append((u,v))
bindings[i] = (u, v)
i = i + 1
return bindings
def run(self):
while True:
start_time = time.time()
# Read capacities from SNMP
self.updateLinksCapacities()
# Log them in the log file too
if self.logfile:
self.logLinksLoads()
#log.info("It took %.3f to update and log the new capacities readout\n"%(time.time()-start_time))
# Go to sleep remaining time to interval
elapsed_time = (time.time() - start_time)
if elapsed_time < self.interval:
sleep_time = self.interval - elapsed_time
time.sleep(sleep_time)
else:
pass
def updateLinksCapacities(self):
"""
"""
# Update counters first
self._updateCounters()
# List in which we hold the already updated interfaces
interfaces_updated = []
for router, counter in self.counters.iteritems():
# Get router interfaces names
iface_names = [data['name'] for data in counter.interfaces]
# Get current loads for router interfaces
# (difference from last read-out)
loads = counter.getLoads()
# Get the time that has elapsed since last read-out
elapsed_time = counter.timeDiff
currentThroughputs = loads/float(elapsed_time)
# Retrieve the bandwidths for router-connected links
bandwidths = []
for ifacename in iface_names:
# Get bandwidth for link in that interface
bw_tmp = [edge_data['bw'] for edge, edge_data in
self.links.iteritems() if
edge_data['interface'] == ifacename]
if bw_tmp != []:
bandwidths.append(bw_tmp[0])
else:
bandwidths.append(0)
# Convert as a numpy array
bandwidths = np.asarray(bandwidths)
# Calculate available capacities
availableCaps = bandwidths - currentThroughputs
# Set link available capacities by interface name
# Get lock first
for i, iface_name in enumerate(iface_names):
if iface_name not in interfaces_updated:
iface_availableCap = availableCaps[i]
# Get interface of other side of the link
edge = [edge for edge, data in self.links.iteritems() if data['interface'] == iface_name]
if edge == []:
# Means is not a router-to-router link
pass
else:
(x,y) = edge[0]
#iface_opposed_name = self.links[(y,x)]['interface']
self.updateLinkCapacity(iface_name, iface_availableCap)
#self.updateLinkCapacity(iface_opposed_name, iface_availableCap)
interfaces_updated.append(iface_name)
#interfaces_updated.append(iface_opposed_name)
def logLinksLoads(self):
# Make a copy of the self.cg and release the lock
with self.lock:
cg_copy = self.cg.copy()
with open(self.logfile, 'a') as f:
s = "%s"%time.time()
to_iterate = sorted(self.link_to_edge_bindings.keys())
for index in to_iterate:
(x,y) = self.link_to_edge_bindings[index]
link_index = index
availableCapactiy = cg_copy[x][y]['capacity']
bandwidth = cg_copy[x][y]['bw']
usedCapacity = bandwidth - availableCapactiy
load = (usedCapacity/float(bandwidth))*100.0
s += ",(L%d %.3f%%)"%(link_index, load)
s += '\n'
f.write(s)
def _updateCounters(self):
"""Updates all interface counters of the routers in the network.
Blocks until the counters have been updated.
"""
for r, counter in self.counters.iteritems():
#start_time = time.time()
while (counter.fromLastLecture() < self.interval):
pass
#log.info("I was stuck %.3f seconds waiting for interval to pass\n"%(time.time()-start_time))
counter.updateCounters32()
def updateLinkCapacity(self, iface_name, new_capacity):
# Get nodes from the link with such iface_name
edge = [edge for edge, data in self.links.iteritems() if
data['interface'] == iface_name]
if edge != []:
(x, y) = edge[0]
else:
return
with self.lock:
if self.median_filter == True:
# Perform median filter of window size = 3
window = self.cg[x][y]['window']
cap = self.cg[x][y]['capacity']
if len(window) == 3: #median filter window size = 3
# Remove last element
window.pop()
# Add new capacity readout to filter window
window = [new_capacity] + window
# Perform the median filtering
# Sort them by magnitude
window_ordered = window[:]
window_ordered.sort()
# Take the median element
chosen_cap = window_ordered[len(window_ordered)/2]
# Update edge data
self.cg[x][y]['window'] = window
self.cg[x][y]['capacity'] = chosen_cap
else:
window = self.cg[x][y]['window']
if len(window) == 3:
window.pop()
# Rate of new capacity wrt previous one
rate = new_capacity/float(window[0])
if rate < 2.05 and rate > 1.95:
# Double read-out found
new_capacity = window[0]
window = [new_capacity] + window
# No median filter but we store also the last 3
# capacities in the window
self.cg[x][y]['window'] = window
self.cg[x][y]['capacity'] = new_capacity
else:
window = [new_capacity] + window
self.cg[x][y]['window'] = window
self.cg[x][y]['capacity'] = new_capacity
else:
window = [new_capacity] + window
self.cg[x][y]['window'] = window
self.cg[x][y]['capacity'] = new_capacity
def printLinkToEdgesLine(self, capacity_graph):
s = ""
to_iterate = sorted(self.link_to_edge_bindings.keys())
for index in to_iterate:
(x,y) = self.link_to_edge_bindings[index]
link_number = index
x_name = self.db.getNameFromIP(x)
y_name = self.db.getNameFromIP(y)
s += ("L%d"%link_number)+'->(%s %s),'%(x_name, y_name)
s += '\n'
return s
def _startCounters(self):
"""This function iterates the routers in the network and creates
a dictionary mapping each router to a SnmpCounter object.
Returns a dict: routerip -> SnmpCounters.
"""
counters_dict = {}
with self.lock:
for r in self.cg.routers:
# Get control ip for router
r_control_ip = self.db.getRouterControlIp(r)
self.ip_to_control[r] = r_control_ip
if r_control_ip:
counters_dict[r] = SnmpCounters(routerIp = r_control_ip)
else:
counters_dict[r] = SnmpCounters(routerIp = r)
return counters_dict
def _startLinks(self):
"""
Only router-to-router links are of interest (since we can't modify
routes inside subnetworks).
"""
return self.db.getAllRouterEdges()
class TrafficGenerator(Base):
"""Object that creates a Traffic Generator in the network.
"""
def __init__(self, *args, **kwargs):
super(TrafficGenerator, self).__init__(*args, **kwargs)
self.scheduler = sched.scheduler(time.time, time.sleep)
self.db = DatabaseHandler()
self.thread_handlers = []
# IP of the Load Balancer Controller host.
try:
self._lbc_ip = ipaddress.ip_interface(self.db.getIpFromHostName(dconf.LBC_Hostname)).ip.compressed
except:
log.info("WARNING: Load balancer controller could not be found in the network\n")
self._lbc_ip = None
def _signal_handler(self, signal, frame):
"""
Terminates trafficgenerator thread gracefully.
"""
log.info("Signal caught... shuting down!\n")
# collect all open _createFlow threads
for t in self.thread_handlers:
# t.join()
log.info("_createFlow thread terminated\n")
# exit
sys.exit(0)
def informLBController(self, flow):
"""Part of the code that deals with the JSON interface to inform to
LBController a new flow created in the network.
"""
url = "http://%s:%s/newflowstarted" % (self._lbc_ip, dconf.LBC_JsonPort)
log.info("\t Informing LBController\n")
log.info("\t * Flow: %s\n" % self.toLogFlowNames(flow))
log.info("\t * Url: %s\n" % url)
try:
requests.post(url, json=flow.toJSON())
except Exception:
log.info("ERROR: LBC could not be informed!\n")
log.info("LOG: Exception in user code:\n")
log.info("-" * 60 + "\n")
log.info(traceback.print_exc())
log.info("-" * 60 + "\n")
def toLogFlowNames(self, flow):
a = "(%s -> %s): %s, t_o: %s, duration: %s"
return a % (
self.db.getNameFromIP(flow.src.compressed),
self.db.getNameFromIP(flow.dst.compressed),
flow.setSizeToStr(flow.size),
flow.setTimeToStr(flow.start_time),
flow.setTimeToStr(flow.duration),
)
def createFlow(self, flow):
"""Calls _createFlow in a different Thread (for efficiency)
"""
# Start thread that will send the Flask request
t = Thread(target=self._createFlow, name="_createFlow", args=(flow,)).start()
# Append thread handler to list
self.thread_handlers.append(t)
def _createFlow(self, flow):
"""Creates the corresponding iperf command to actually install the
given flow in the network. This function has to call
self.informLBController!
"""
# Sleep after it is your time to start
time.sleep(flow["start_time"])
# Call to informLBController if it is active
if self._lbc_ip:
self.informLBController(flow)
# time.sleep(0.2)
# Create new flow with hosts ip's instead of interfaces
# Iperf only understands ip's
flow2 = Flow(
src=flow["src"].ip.compressed,
dst=flow["dst"].ip.compressed,
sport=flow["sport"],
dport=flow["dport"],
size=flow["size"],
start_time=flow["start_time"],
duration=flow["duration"],
)
url = "http://%s:%s/startflow" % (flow2["src"], dconf.Hosts_JsonPort)
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Starting Flow\n" % t)
log.info("\t Sending request to host %s\n" % str(flow["src"]))
log.info("\t * Flow: %s\n" % self.toLogFlowNames(flow))
log.info("\t * Url: %s\n" % url)
# Send request to host to start new iperf client session
try:
requests.post(url, json=flow2.toJSON())
except Exception:
log.info("ERROR: Request could not be sent to Host!\n")
log.info("LOG: Exception in user code:\n")
log.info("-" * 60 + "\n")
log.info(traceback.print_exc())
log.info("-" * 60 + "\n")
def stopFlow(self, flow):
"""Instructs host to stop iperf client session (flow).
"""
flow2 = Flow(
src=flow["src"].ip.compressed,
dst=flow["dst"].ip.compressed,
sport=flow["sport"],
dport=flow["dport"],
size=flow["size"],
start_time=flow["start_time"],
duration=flow["duration"],
)
url = "http://%s:%s/stopflow" % (flow2["src"], dconf.Hosts_JsonPort)
t = time.strftime("%H:%M:%S", time.gmtime())
log.info("%s - Stopping Flow\n" % t)
log.info("\t Sending request to host to stop flow %s\n" % str(flow["src"]))
log.info("\t * Flow: %s\n" % self.toLogFlowNames(flow))
log.info("\t * Url: %s\n" % url)
# Send request to host to start new iperf client session
try:
requests.post(url, json=flow2.toJSON())
except Exception:
log.info("ERROR: Stop flow request could not be sent to Host!\n")
def createRandomFlow(self):
"""Creates a random flow in the network
"""
pass
def scheduleRandomFlows(self, ex_time=60, max_size="40M"):
"""Creates a random schedule of random flows in the network. This will
be useful later to evaluate the performance of the
LBController.
"""
pass
def scheduleFileFlows(self, flowfile):
"""Schedules the flows specified in the flowfile
"""
f = open(flowfile, "r")
flows = f.readlines()
if flows:
for flowline in flows:
flowline = flowline.replace(" ", "").replace("\n", "")
if flowline != "" and flowline[0] != "#":
try:
[s, d, sp, dp, size, s_t, dur] = flowline.strip("\n").split(",")
# Get hosts IPs
src_iface = self.db.getIpFromHostName(s)
dst_iface = self.db.getIpFromHostName(d)
except Exception:
log.info("EP, SOMETHING HAPPENS HERE\n")
src_iface = None
dst_iface = None
if src_iface != None and dst_iface != None:
flow = Flow(
src=src_iface, dst=dst_iface, sport=sp, dport=dp, size=size, start_time=s_t, duration=dur
)
# Schedule flow creation
self.scheduler.enter(0, 1, self.createFlow, ([flow]))
else:
log.info("ERROR! Hosts %s and/or %s do not exist in the network!\n" % (s, d))
# Make the scheduler run after file has been parsed
self.scheduler.run()
else:
log.info("\t No flows to schedule in file\n")