def run_test(self):
self.txouts = gen_return_txouts()
self.relayfee = self.nodes[0].getnetworkinfo()['relayfee']
utxo_count = 90
utxos = create_confirmed_utxos(self.relayfee, self.nodes[0],
utxo_count)
base_fee = self.relayfee * 100 # our transactions are smaller than 100kb
txids = []
# Create 3 batches of transactions at 3 different fee rate levels
range_size = utxo_count // 3
for i in range(3):
txids.append([])
start_range = i * range_size
end_range = start_range + range_size
txids[i] = create_lots_of_big_transactions(
self.nodes[0], self.txouts, utxos[start_range:end_range],
end_range - start_range, (i + 1) * base_fee)
# Make sure that the size of each group of transactions exceeds
# MAX_BLOCK_BASE_SIZE -- otherwise the test needs to be revised to create
# more transactions.
mempool = self.nodes[0].getrawmempool(True)
sizes = [0, 0, 0]
for i in range(3):
for j in txids[i]:
assert (j in mempool)
sizes[i] += mempool[j]['size']
assert (sizes[i] > MAX_BLOCK_BASE_SIZE) # Fail => raise utxo_count
# add a fee delta to something in the cheapest bucket and make sure it gets mined
# also check that a different entry in the cheapest bucket is NOT mined
self.nodes[0].prioritisetransaction(txid=txids[0][0],
fee_delta=int(3 * base_fee * COIN))
self.nodes[0].generate(1)
mempool = self.nodes[0].getrawmempool()
self.log.info("Assert that prioritised transaction was mined")
assert (txids[0][0] not in mempool)
assert (txids[0][1] in mempool)
high_fee_tx = None
for x in txids[2]:
if x not in mempool:
high_fee_tx = x
# Something high-fee should have been mined!
assert (high_fee_tx is not None)
# Add a prioritisation before a tx is in the mempool (de-prioritising a
# high-fee transaction so that it's now low fee).
self.nodes[0].prioritisetransaction(
txid=high_fee_tx, fee_delta=-int(2 * base_fee * COIN))
# Add everything back to mempool
self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())
# Check to make sure our high fee rate tx is back in the mempool
mempool = self.nodes[0].getrawmempool()
assert (high_fee_tx in mempool)
# Now verify the modified-high feerate transaction isn't mined before
# the other high fee transactions. Keep mining until our mempool has
# decreased by all the high fee size that we calculated above.
while self.nodes[0].getmempoolinfo()['bytes'] > sizes[0] + sizes[1]:
self.nodes[0].generate(1)
# High fee transaction should not have been mined, but other high fee rate
# transactions should have been.
mempool = self.nodes[0].getrawmempool()
self.log.info(
"Assert that de-prioritised transaction is still in mempool")
assert (high_fee_tx in mempool)
for x in txids[2]:
if x != high_fee_tx:
assert (x not in mempool)
# Create a free transaction. Should be rejected.
utxo_list = self.nodes[0].listunspent()
assert (len(utxo_list) > 0)
utxo = utxo_list[0]
inputs = []
outputs = {}
inputs.append({"txid": utxo["txid"], "vout": utxo["vout"]})
outputs[self.nodes[0].getnewaddress()] = utxo["amount"]
raw_tx = self.nodes[0].createrawtransaction(inputs, outputs)
tx_hex = self.nodes[0].signrawtransaction(raw_tx)["hex"]
tx_id = self.nodes[0].decoderawtransaction(tx_hex)["txid"]
# This will raise an exception due to min relay fee not being met
assert_raises_rpc_error(-26, "66: min relay fee not met",
self.nodes[0].sendrawtransaction, tx_hex)
assert (tx_id not in self.nodes[0].getrawmempool())
# This is a less than 1000-byte transaction, so just set the fee
# to be the minimum for a 1000 byte transaction and check that it is
# accepted.
self.nodes[0].prioritisetransaction(txid=tx_id,
fee_delta=int(self.relayfee *
COIN))
self.log.info(
"Assert that prioritised free transaction is accepted to mempool")
assert_equal(self.nodes[0].sendrawtransaction(tx_hex), tx_id)
assert (tx_id in self.nodes[0].getrawmempool())
# Test that calling prioritisetransaction is sufficient to trigger
# getblocktemplate to (eventually) return a new block.
mock_time = int(time.time())
self.nodes[0].setmocktime(mock_time)
template = self.nodes[0].getblocktemplate()
self.nodes[0].prioritisetransaction(
txid=tx_id, fee_delta=-int(self.relayfee * COIN))
self.nodes[0].setmocktime(mock_time + 10)
new_template = self.nodes[0].getblocktemplate()
assert (template != new_template)
def run_test(self):
self.relayfee = self.nodes[0].getnetworkinfo()['relayfee']
utxo_count = 90
utxos = create_confirmed_utxos(self.nodes[0], utxo_count)
# our transactions are smaller than 100kb
base_fee = self.relayfee * 100
txids = []
# Create 3 batches of transactions at 3 different fee rate levels
range_size = utxo_count // 3
for i in range(3):
txids.append([])
start_range = i * range_size
end_range = start_range + range_size
txids[i] = send_big_transactions(self.nodes[0],
utxos[start_range:end_range],
end_range - start_range,
10 * (i + 1))
# Make sure that the size of each group of transactions exceeds
# LEGACY_MAX_BLOCK_SIZE -- otherwise the test needs to be revised to create
# more transactions.
mempool = self.nodes[0].getrawmempool(True)
sizes = [0, 0, 0]
for i in range(3):
for j in txids[i]:
assert (j in mempool)
sizes[i] += mempool[j]['size']
# Fail => raise utxo_count
assert (sizes[i] > LEGACY_MAX_BLOCK_SIZE)
# add a fee delta to something in the cheapest bucket and make sure it gets mined
# also check that a different entry in the cheapest bucket is NOT mined (lower
# the priority to ensure its not mined due to priority)
self.nodes[0].prioritisetransaction(
txids[0][0], 0,
100 * self.nodes[0].calculate_fee_from_txid(txids[0][0]))
self.nodes[0].prioritisetransaction(txids[0][1], -1e15, 0)
self.nodes[0].generate(1)
mempool = self.nodes[0].getrawmempool()
self.log.info("Assert that prioritised transaction was mined")
assert (txids[0][0] not in mempool)
assert (txids[0][1] in mempool)
confirmed_transactions = self.nodes[0].getblock(
self.nodes[0].getbestblockhash())['tx']
# Pull the highest fee-rate transaction from a block
high_fee_tx = confirmed_transactions[1]
# Something high-fee should have been mined!
assert (high_fee_tx != None)
# Add a prioritisation before a tx is in the mempool (de-prioritising a
# high-fee transaction so that it's now low fee).
#
# NOTE WELL: gettransaction returns the fee as a negative number and
# as fractional coins. However, the prioritisetransaction expects a
# number of satoshi to add or subtract from the actual fee.
# Thus the conversation here is simply int(tx_fee*COIN) to remove all fees, and then
# we add the minimum fee back.
tx_fee = self.nodes[0].gettransaction(high_fee_tx)['fee']
self.nodes[0].prioritisetransaction(
high_fee_tx, -1e15,
int(tx_fee * COIN) +
self.nodes[0].calculate_fee_from_txid(high_fee_tx))
# Add everything back to mempool
self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())
# Check to make sure our high fee rate tx is back in the mempool
mempool = self.nodes[0].getrawmempool()
assert (high_fee_tx in mempool)
# Now verify the modified-high feerate transaction isn't mined before
# the other high fee transactions. Keep mining until our mempool has
# decreased by all the high fee size that we calculated above.
while (self.nodes[0].getmempoolinfo()['bytes'] > sizes[0] + sizes[1]):
self.nodes[0].generate(1)
# High fee transaction should not have been mined, but other high fee rate
# transactions should have been.
mempool = self.nodes[0].getrawmempool()
self.log.info(
"Assert that de-prioritised transaction is still in mempool")
assert (high_fee_tx in mempool)
for x in txids[2]:
if (x != high_fee_tx):
assert (x not in mempool)
# Create a free, low priority transaction. Should be rejected.
utxo_list = self.nodes[0].listunspent()
assert (len(utxo_list) > 0)
utxo = utxo_list[0]
inputs = []
outputs = {}
inputs.append({"txid": utxo["txid"], "vout": utxo["vout"]})
outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
raw_tx = self.nodes[0].createrawtransaction(inputs, outputs)
tx_hex = self.nodes[0].signrawtransaction(raw_tx)["hex"]
txid = self.nodes[0].sendrawtransaction(tx_hex)
# A tx that spends an in-mempool tx has 0 priority, so we can use it to
# test the effect of using prioritise transaction for mempool
# acceptance
inputs = []
inputs.append({"txid": txid, "vout": 0})
outputs = {}
outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
raw_tx2 = self.nodes[0].createrawtransaction(inputs, outputs)
tx2_hex = self.nodes[0].signrawtransaction(raw_tx2)["hex"]
tx2_id = self.nodes[0].decoderawtransaction(tx2_hex)["txid"]
# This will raise an exception due to min relay fee not being met
assert_raises_rpc_error(-26, "66: insufficient priority",
self.nodes[0].sendrawtransaction, tx2_hex)
assert (tx2_id not in self.nodes[0].getrawmempool())
# This is a less than 1000-byte transaction, so just set the fee
# to be the minimum for a 1000 byte transaction and check that it is
# accepted.
self.nodes[0].prioritisetransaction(tx2_id, 0,
int(self.relayfee * COIN))
self.log.info(
"Assert that prioritised free transaction is accepted to mempool")
assert_equal(self.nodes[0].sendrawtransaction(tx2_hex), tx2_id)
assert (tx2_id in self.nodes[0].getrawmempool())
# Test that calling prioritisetransaction is sufficient to trigger
# getblocktemplate to (eventually) return a new block.
mock_time = int(time.time())
self.nodes[0].setmocktime(mock_time)
template = self.nodes[0].getblocktemplate()
self.nodes[0].prioritisetransaction(txid, 0,
-int(self.relayfee * COIN))
self.nodes[0].setmocktime(mock_time + 10)
new_template = self.nodes[0].getblocktemplate()
assert (template != new_template)