def crash_timeout():
global enc_start_index
enc_start_index = 0
if slave_ever_connected:
print(Fore.RED + "No advertisement from " + advertiser_address.upper() +
' received\nThe device may have crashed!!!')
disable_timeout('scan_timeout')
def crash_timeout():
global run_script
print(Fore.RED + "No advertisement from " + advertiser_address.upper() +
' received\nThe device may have crashed!!!')
disable_timeout('scan_timeout')
run_script = False
def crash_timeout():
global crashed
if not crashed:
crashed = True
print(Fore.RED + "No advertisement from " +
advertiser_address.upper() +
' received\nThe device may have crashed!!!')
disable_timeout('scan_timeout')
def check_pulse_via_scan(driver, master_address, advertiser_address):
global crash_timeout_fired
crash_timeout_fired = False
def crash_timeout():
global crash_timeout_fired
log.error('Device not discovered during scan. Presumed dead....')
crash_timeout_fired = True
scan_req = BTLE() / BTLE_ADV() / BTLE_SCAN_REQ(ScanA=master_address,
AdvA=advertiser_address)
# Yes, we're sending raw link layer messages in Python. Don't tell anyone as this is forbidden!!!
log.info('Waiting activity from ' + advertiser_address)
driver.send(scan_req)
start_timeout('crash_timeout', 7, crash_timeout)
# Internal vars
none_count = 0
# verify alive
while True:
pkt = None
# Receive packet from the NRF52 Dongle
data = driver.raw_receive()
if data:
# Decode Bluetooth Low Energy Data
pkt = BTLE(data)
# if packet is incorrectly decoded, you may not be using the dongle
if pkt is None:
none_count += 1
if none_count >= 4:
log.error('NRF52 Dongle not detected')
sys.exit(0)
continue
# log.debug("Slave RX <--- " + pkt.summary()[7:])
if (BTLE_SCAN_RSP in pkt
and pkt.AdvA == advertiser_address.lower()) or (BTLE_DATA
in pkt):
log.debug("Slave RX <--- " + pkt.summary()[7:])
log.info('Still kicking!!!')
disable_timeout('crash_timeout')
return True
if crash_timeout_fired:
log.error("No activity from device. Presumed dead....")
return False
def check_pulse_via_mtu_exchange(driver, access_address):
global crash_timeout_fired
crash_timeout_fired = False
def crash_timeout():
global crash_timeout_fired
log.error('Device did not answer to MTU Request. Presumed dead....')
crash_timeout_fired = True
# Here we send a key size with 253, which is way higher than the usual 16 bytes for the pairing procedure
att_mtu_req = BTLE(access_addr=access_address) / BTLE_DATA() / L2CAP_Hdr(
) / ATT_Hdr() / ATT_Exchange_MTU_Request(mtu=247)
# Yes, we're sending raw link layer messages in Python. Don't tell anyone as this is forbidden!!!
log.info('Waiting for activity')
driver.send(att_mtu_req) # Send mtu request 1 time
start_timeout('crash_timeout', 7, crash_timeout)
# Internal vars
none_count = 0
# verify alive
while True:
pkt = None
# Receive packet from the NRF52 Dongle
data = driver.raw_receive()
if data:
# Decode Bluetooth Low Energy Data
pkt = BTLE(data)
# if packet is incorrectly decoded, you may not be using the dongle
if pkt is None:
none_count += 1
if none_count >= 4:
log.error('NRF52 Dongle not detected')
sys.exit(0)
continue
# log.debug("Slave RX <--- " + pkt.summary()[7:])
if ATT_Exchange_MTU_Response in pkt and pkt.access_addr == access_address:
log.debug("Slave RX <--- " + pkt.summary()[7:])
log.info('Still kicking!!!')
disable_timeout('crash_timeout')
return True
if crash_timeout_fired:
log.error("No activity from device. Presumed dead....")
return False
def crash_timeout():
print(Fore.RED + "No advertisement from " + advertiser_address.upper() +
' received\nThe device may have crashed!!!')
driver.save_pcap()
disable_timeout('scan_timeout')
if pkt is None:
none_count += 1
if none_count >= 4:
print(Fore.RED + 'NRF52 Dongle not detected')
sys.exit(0)
continue
elif BTLE_DATA in pkt and BTLE_EMPTY_PDU not in pkt:
update_timeout('scan_timeout')
# Print slave data channel PDUs summary
print(Fore.MAGENTA + "Slave RX <--- " + pkt.summary()[7:])
# --------------- Process Link Layer Packets here ------------------------------------
# Check if packet from advertised is received
if pkt and (BTLE_SCAN_RSP in pkt) and pkt.AdvA == advertiser_address.lower():
connecting = True
update_timeout('scan_timeout')
disable_timeout('crash_timeout')
print(Fore.GREEN + advertiser_address.upper() + ': ' + pkt.summary()[7:] + ' Detected')
# Send connection request to advertiser
conn_request = BTLE() / BTLE_ADV(RxAdd=pkt.TxAdd, TxAdd=0) / BTLE_CONNECT_REQ(
InitA=master_address,
AdvA=advertiser_address,
AA=access_address, # Access address (any)
crc_init=0x179a9c, # CRC init (any)
win_size=2, # 2.5 of windows size (anchor connection window size)
win_offset=1, # 1.25ms windows offset (anchor connection point)
interval=16, # 20ms connection interval
latency=0, # Slave latency (any)
timeout=50, # Supervision timeout, 500ms (any)
chM=0x1FFFFFFFFF, # Any
hop=5, # Hop increment (any)
elif LL_LENGTH_RSP in pkt or LL_UNKNOWN_RSP in pkt:
pkt = BTLE(access_addr=access_address) / \
BTLE_DATA() / L2CAP_Hdr() / ATT_Hdr() / ATT_Exchange_MTU_Request(mtu=247)
driver.send(pkt)
elif LL_LENGTH_REQ in pkt:
pkt = BTLE(access_addr=access_address) / BTLE_DATA() / CtrlPDU(
) / LL_LENGTH_RSP(max_tx_bytes=247 + 4, max_rx_bytes=247 + 4)
driver.send(pkt)
elif ATT_Exchange_MTU_Response in pkt:
send_pairing_request()
elif SM_Hdr in pkt:
if SM_Pairing_Response in pkt:
disable_timeout('smp_timeout')
print(Fore.YELLOW + 'Master auth: ' +
hex(paring_auth_request) + ', Slave auth: ' +
hex(pkt.authentication))
if enable_secure_connections and (pkt.authentication & 0x08):
print(Fore.GREEN + "Secure Connections Pairing")
elif enable_secure_connections and not (pkt.authentication
& 0x08):
print(
Fore.RED +
'Peripheral does not accept Secure Connections pairing\nEnding Test...'
)
run_script = False
disable_smp = True
else:
print(Fore.GREEN + "Legacy Pairing")
def connect(driver, master_address, advertiser_address, access_address):
# Internal vars
none_count = 0
end_connection = False
connecting = False
global adv_timeout_fired
adv_timeout_fired = False
def adv_timeout():
global adv_timeout_fired
log.error('Device not discovered during scan')
adv_timeout_fired = True
# Send scan request
scan_req = BTLE() / BTLE_ADV() / BTLE_SCAN_REQ(ScanA=master_address,
AdvA=advertiser_address)
driver.send(scan_req)
log.info('Scan Send')
start_timeout('adv_timeout', 10, adv_timeout)
while True:
if adv_timeout_fired:
return False
pkt = None
# Receive packet from the NRF52 Dongle
data = driver.raw_receive()
if data:
# Decode Bluetooth Low Energy Data
pkt = BTLE(data)
# if packet is incorrectly decoded, you may not be using the dongle
if pkt is None:
none_count += 1
if none_count >= 4:
log.error('NRF52 Dongle not detected')
sys.exit(0)
continue
elif BTLE_DATA in pkt and BTLE_EMPTY_PDU not in pkt:
# Print slave data channel PDUs summary
log.debug("Slave RX <--- " + pkt.summary()[7:])
# --------------- Process Link Layer Packets here ------------------------------------
# Check if packet from advertised is received
if pkt and (BTLE_SCAN_RSP
in pkt) and pkt.AdvA == advertiser_address.lower():
disable_timeout('adv_timeout')
connecting = True
log.info(advertiser_address.upper() + ': ' +
pkt.summary()[7:] + ' Detected')
# Send connection request to advertiser
conn_request = BTLE(
) / BTLE_ADV(RxAdd=pkt.TxAdd, TxAdd=0) / BTLE_CONNECT_REQ(
InitA=master_address,
AdvA=advertiser_address,
AA=access_address, # Access address (any)
crc_init=0x179a9c, # CRC init (any)
win_size=
2, # 2.5 of windows size (anchor connection window size)
win_offset=
1, # 1.25ms windows offset (anchor connection point)
interval=16, # 20ms connection interval
latency=0, # Slave latency (any)
timeout=50, # Supervision timeout, 500ms (any)
chM=0x1FFFFFFFFF, # Any
hop=5, # Hop increment (any)
SCA=0, # Clock tolerance
)
# Yes, we're sending raw link layer messages in Python. Don't tell anyone as this is forbidden!!!
driver.send(conn_request)
elif BTLE_DATA in pkt and connecting == True:
connecting = False
log.info('Slave Connected (L2Cap channel established)')
return True
none_count += 1
if none_count >= 4:
print(Fore.RED + 'NRF52 Dongle not detected')
sys.exit(0)
continue
elif BTLE_DATA in pkt and BTLE_EMPTY_PDU not in pkt:
update_timeout('scan_timeout')
# Print slave data channel PDUs summary
print(Fore.MAGENTA + "Slave RX <--- " + pkt.summary()[7:])
# --------------- Process Link Layer Packets here ------------------------------------
# Check if packet from advertised is received
if pkt and (BTLE_SCAN_RSP in pkt or BTLE_ADV in pkt) and pkt.AdvA == advertiser_address.lower() \
and connecting == False:
connecting = True
update_timeout('scan_timeout')
disable_timeout('crash_timeout')
slave_addr_type = pkt.TxAdd
print(Fore.GREEN + advertiser_address.upper() + ': ' +
pkt.summary()[7:] + ' Detected')
# Send connection request to advertiser
conn_request = BTLE(
) / BTLE_ADV(RxAdd=slave_addr_type, TxAdd=0) / BTLE_CONNECT_REQ(
InitA=master_address,
AdvA=advertiser_address,
AA=access_address, # Access address (any)
crc_init=0x179a9c, # CRC init (any)
win_size=
2, # 2.5 of windows size (anchor connection window size)
win_offset=1, # 1.25ms windows offset (anchor connection point)
interval=16, # 20ms connection interval