def testCoreProject_Save(monkeypatch, nwMinimal, mockGUI, refDir):
"""Test saving a project.
"""
theProject = NWProject(mockGUI)
testFile = os.path.join(nwMinimal, "nwProject.nwx")
backFile = os.path.join(nwMinimal, "nwProject.bak")
compFile = os.path.join(refDir, os.path.pardir, "minimal", "nwProject.nwx")
# Nothing to save
assert theProject.saveProject() is False
# Open test project
assert theProject.openProject(nwMinimal)
# Fail on folder structure check
with monkeypatch.context() as mp:
mp.setattr("os.path.isdir", lambda *a: False)
assert theProject.saveProject() is False
# Fail on open file
with monkeypatch.context() as mp:
mp.setattr("builtins.open", causeOSError)
assert theProject.saveProject() is False
# Fail on creating .bak file
with monkeypatch.context() as mp:
mp.setattr("os.replace", causeOSError)
assert theProject.saveProject() is False
assert os.path.isfile(backFile) is False
# Successful save
saveCount = theProject.saveCount
autoCount = theProject.autoCount
assert theProject.saveProject() is True
assert theProject.saveCount == saveCount + 1
assert theProject.autoCount == autoCount
assert cmpFiles(testFile, compFile, [2, 6, 7, 8, 9])
# Check that a second save creates a .bak file
assert os.path.isfile(backFile) is True
# Successful autosave
saveCount = theProject.saveCount
autoCount = theProject.autoCount
assert theProject.saveProject(autoSave=True) is True
assert theProject.saveCount == saveCount
assert theProject.autoCount == autoCount + 1
assert cmpFiles(testFile, compFile, [2, 6, 7, 8, 9])
# Close test project
assert theProject.closeProject()
def testCoreProject_NewRoot(fncDir, outDir, refDir, dummyGUI):
"""Check that new root folders can be added to the project.
"""
projFile = os.path.join(fncDir, "nwProject.nwx")
testFile = os.path.join(outDir, "coreProject_NewRoot_nwProject.nwx")
compFile = os.path.join(refDir, "coreProject_NewRoot_nwProject.nwx")
theProject = NWProject(dummyGUI)
theProject.projTree.setSeed(42)
assert theProject.newProject({"projPath": fncDir})
assert theProject.setProjectPath(fncDir)
assert theProject.saveProject()
assert theProject.closeProject()
assert theProject.openProject(projFile)
assert isinstance(theProject.newRoot("Novel", nwItemClass.NOVEL), type(None))
assert isinstance(theProject.newRoot("Plot", nwItemClass.PLOT), type(None))
assert isinstance(theProject.newRoot("Character", nwItemClass.CHARACTER), type(None))
assert isinstance(theProject.newRoot("World", nwItemClass.WORLD), type(None))
assert isinstance(theProject.newRoot("Timeline", nwItemClass.TIMELINE), str)
assert isinstance(theProject.newRoot("Object", nwItemClass.OBJECT), str)
assert isinstance(theProject.newRoot("Custom1", nwItemClass.CUSTOM), str)
assert isinstance(theProject.newRoot("Custom2", nwItemClass.CUSTOM), str)
assert theProject.projChanged
assert theProject.saveProject()
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
assert not theProject.projChanged
def testCoreToOdt_SaveFlat(mockGUI, fncDir, outDir, refDir):
"""Test the document save functions.
"""
theProject = NWProject(mockGUI)
theDoc = ToOdt(theProject, isFlat=True)
theDoc._isNovel = True
assert theDoc.setLanguage(None) is False
assert theDoc.setLanguage("nb_NO") is True
theDoc.setColourHeaders(True)
theDoc._theText = ("## Chapter One\n\n"
"Text\n\n"
"## Chapter Two\n\n"
"Text\n\n")
theDoc.tokenizeText()
theDoc.initDocument()
theDoc.doConvert()
theDoc.closeDocument()
flatFile = os.path.join(fncDir, "document.fodt")
testFile = os.path.join(outDir, "coreToOdt_SaveFlat_document.fodt")
compFile = os.path.join(refDir, "coreToOdt_SaveFlat_document.fodt")
theDoc.saveFlatXML(flatFile)
assert os.path.isfile(flatFile)
copyfile(flatFile, testFile)
assert cmpFiles(testFile, compFile, [4, 5])
def testCoreProject_NewFile(fncDir, outDir, refDir, dummyGUI):
"""Check that new files can be added to the project.
"""
projFile = os.path.join(fncDir, "nwProject.nwx")
testFile = os.path.join(outDir, "coreProject_NewFile_nwProject.nwx")
compFile = os.path.join(refDir, "coreProject_NewFile_nwProject.nwx")
theProject = NWProject(dummyGUI)
theProject.projTree.setSeed(42)
assert theProject.newProject({"projPath": fncDir})
assert theProject.setProjectPath(fncDir)
assert theProject.saveProject()
assert theProject.closeProject()
assert theProject.openProject(projFile)
assert isinstance(
theProject.newFile("Hello", nwItemClass.NOVEL, "31489056e0916"), str)
assert isinstance(
theProject.newFile("Jane", nwItemClass.CHARACTER, "71ee45a3c0db9"),
str)
assert theProject.projChanged
assert theProject.saveProject()
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
assert not theProject.projChanged
def testCoreProject_NewMinimal(fncDir, outDir, refDir, tmpDir, dummyGUI):
"""Create a new project from a project wizard dictionary. With
default setting, creating a Minimal project.
"""
projFile = os.path.join(fncDir, "nwProject.nwx")
testFile = os.path.join(outDir, "coreProject_NewMinimal_nwProject.nwx")
compFile = os.path.join(refDir, "coreProject_NewMinimal_nwProject.nwx")
theProject = NWProject(dummyGUI)
theProject.projTree.setSeed(42)
# Setting no data should fail
assert not theProject.newProject({})
# Try again with a proper path
assert theProject.newProject({"projPath": fncDir})
assert theProject.saveProject()
assert theProject.closeProject()
# Creating the project once more should fail
assert not theProject.newProject({"projPath": fncDir})
# Check the new project
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
# Open again
assert theProject.openProject(projFile)
# Save and close
assert theProject.saveProject()
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
assert not theProject.projChanged
# Open a second time
assert theProject.openProject(projFile)
assert not theProject.openProject(projFile)
assert theProject.openProject(projFile, overrideLock=True)
assert theProject.saveProject()
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
def testCoreProject_Save(monkeypatch, nwMinimal, dummyGUI, refDir):
"""Test saving a project.
"""
theProject = NWProject(dummyGUI)
testFile = os.path.join(nwMinimal, "nwProject.nwx")
compFile = os.path.join(refDir, os.path.pardir, "minimal", "nwProject.nwx")
# Nothing to save
assert theProject.saveProject() is False
# Open test project
assert theProject.openProject(nwMinimal)
# Fail on folder structure check
monkeypatch.setattr("os.path.isdir", lambda *args: False)
assert theProject.saveProject() is False
monkeypatch.undo()
# Fail on open file
monkeypatch.setattr("builtins.open", causeOSError)
assert theProject.saveProject() is False
monkeypatch.undo()
# Successful save
saveCount = theProject.saveCount
autoCount = theProject.autoCount
assert theProject.saveProject() is True
assert theProject.saveCount == saveCount + 1
assert theProject.autoCount == autoCount
assert cmpFiles(testFile, compFile, [2, 6, 7, 8, 9])
# Successful autosave
saveCount = theProject.saveCount
autoCount = theProject.autoCount
assert theProject.saveProject(autoSave=True) is True
assert theProject.saveCount == saveCount
assert theProject.autoCount == autoCount + 1
assert cmpFiles(testFile, compFile, [2, 6, 7, 8, 9])
# Close test project
assert theProject.closeProject()
def testCoreProject_NewCustomA(fncDir, outDir, refDir, dummyGUI):
"""Create a new project from a project wizard dictionary.
Custom type with chapters and scenes.
"""
projFile = os.path.join(fncDir, "nwProject.nwx")
testFile = os.path.join(outDir, "coreProject_NewCustomA_nwProject.nwx")
compFile = os.path.join(refDir, "coreProject_NewCustomA_nwProject.nwx")
projData = {
"projName":
"Test Custom",
"projTitle":
"Test Novel",
"projAuthors":
"Jane Doe\nJohn Doh\n",
"projPath":
fncDir,
"popSample":
False,
"popMinimal":
False,
"popCustom":
True,
"addRoots": [
nwItemClass.PLOT,
nwItemClass.CHARACTER,
nwItemClass.WORLD,
nwItemClass.TIMELINE,
nwItemClass.OBJECT,
nwItemClass.ENTITY,
],
"numChapters":
3,
"numScenes":
3,
"chFolders":
True,
}
theProject = NWProject(dummyGUI)
theProject.projTree.setSeed(42)
assert theProject.newProject(projData)
assert theProject.saveProject()
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
def testCoreIndex_LoadSave(monkeypatch, nwLipsum, mockGUI, outDir, refDir):
"""Test core functionality of scaning, saving, loading and checking
the index cache file.
"""
projFile = os.path.join(nwLipsum, "meta", "tagsIndex.json")
testFile = os.path.join(outDir, "coreIndex_LoadSave_tagsIndex.json")
compFile = os.path.join(refDir, "coreIndex_LoadSave_tagsIndex.json")
theProject = NWProject(mockGUI)
theProject.projTree.setSeed(42)
assert theProject.openProject(nwLipsum)
theIndex = NWIndex(theProject)
notIndexable = {
"b3643d0f92e32": False, # Novel ROOT
"45e6b01ca35c1": False, # Chapter One FOLDER
"6bd935d2490cd": False, # Chapter Two FOLDER
"67a8707f2f249": False, # Character ROOT
"6c6afb1247750": False, # Plot ROOT
"60bdf227455cc": False, # World ROOT
}
for tItem in theProject.projTree:
assert theIndex.reIndexHandle(tItem.itemHandle) is notIndexable.get(
tItem.itemHandle, True)
assert theIndex.reIndexHandle(None) is False
# Make the save fail
with monkeypatch.context() as mp:
mp.setattr("builtins.open", causeException)
assert theIndex.saveIndex() is False
# Make the save pass
assert theIndex.saveIndex() is True
# Take a copy of the index
tagIndex = str(theIndex._tagIndex)
refIndex = str(theIndex._refIndex)
fileIndex = str(theIndex._fileIndex)
textCounts = str(theIndex._fileMeta)
# Delete a handle
assert theIndex._tagIndex.get("Bod", None) is not None
assert theIndex._refIndex.get("4c4f28287af27", None) is not None
assert theIndex._fileIndex.get("4c4f28287af27", None) is not None
assert theIndex._fileMeta.get("4c4f28287af27", None) is not None
theIndex.deleteHandle("4c4f28287af27")
assert theIndex._tagIndex.get("Bod", None) is None
assert theIndex._refIndex.get("4c4f28287af27", None) is None
assert theIndex._fileIndex.get("4c4f28287af27", None) is None
assert theIndex._fileMeta.get("4c4f28287af27", None) is None
# Clear the index
theIndex.clearIndex()
assert theIndex._tagIndex == {}
assert theIndex._refIndex == {}
assert theIndex._fileIndex == {}
assert theIndex._fileMeta == {}
# Make the load fail
with monkeypatch.context() as mp:
mp.setattr(json, "load", causeException)
assert theIndex.loadIndex() is False
# Make the load pass
assert theIndex.loadIndex() is True
assert str(theIndex._tagIndex) == tagIndex
assert str(theIndex._refIndex) == refIndex
assert str(theIndex._fileIndex) == fileIndex
assert str(theIndex._fileMeta) == textCounts
# Break the index and check that we notice
assert theIndex.indexBroken is False
theIndex._tagIndex["Bod"].append("Stuff")
theIndex._checkIndex()
assert theIndex.indexBroken is True
# Finalise
assert theProject.closeProject() is True
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
def testCoreProject_Backup(monkeypatch, dummyGUI, nwMinimal, tmpDir):
"""Test the automated backup feature of the project class. The test
creates a backup of the Minimal test project, and then unzips the
backupd file and checks that the project XML file is identical to
the original file.
"""
theProject = NWProject(dummyGUI)
assert theProject.openProject(nwMinimal)
# Test faulty settings
# No project
dummyGUI.hasProject = False
assert not theProject.zipIt(doNotify=False)
dummyGUI.hasProject = True
# Invalid path
theProject.mainConf.backupPath = None
assert not theProject.zipIt(doNotify=False)
# Missing project name
theProject.mainConf.backupPath = tmpDir
theProject.projName = ""
assert not theProject.zipIt(doNotify=False)
# Non-existent folder
theProject.mainConf.backupPath = os.path.join(tmpDir, "nonexistent")
theProject.projName = "Test Minimal"
assert not theProject.zipIt(doNotify=False)
# Same folder as project (causes infinite loop in zipping)
theProject.mainConf.backupPath = nwMinimal
assert not theProject.zipIt(doNotify=False)
# Set a valid folder
theProject.mainConf.backupPath = tmpDir
# Can't make folder
monkeypatch.setattr("os.mkdir", causeOSError)
assert not theProject.zipIt(doNotify=False)
monkeypatch.undo()
# Can't write archive
monkeypatch.setattr("shutil.make_archive", causeOSError)
assert not theProject.zipIt(doNotify=False)
monkeypatch.undo()
# Test correct settings
assert theProject.zipIt(doNotify=True)
theFiles = os.listdir(os.path.join(tmpDir, "Test Minimal"))
assert len(theFiles) == 1
theZip = theFiles[0]
assert theZip[:12] == "Backup from "
assert theZip[-4:] == ".zip"
# Extract the archive
with ZipFile(os.path.join(tmpDir, "Test Minimal", theZip), "r") as inZip:
inZip.extractall(os.path.join(tmpDir, "extract"))
# Check that the main project file was restored
assert cmpFiles(os.path.join(nwMinimal, "nwProject.nwx"),
os.path.join(tmpDir, "extract", "nwProject.nwx"))
def testGuiMain_Editing(qtbot, monkeypatch, nwGUI, fncProj, refDir, outDir,
mockRnd):
"""Test the document editor.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *a: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information", lambda *a: QMessageBox.Yes)
monkeypatch.setattr(GuiProjectTree, "hasFocus", lambda *a: True)
monkeypatch.setattr(GuiDocEditor, "hasFocus", lambda *a: True)
monkeypatch.setattr(QInputDialog, "getText", lambda *a, text: (text, True))
monkeypatch.setattr(GuiEditLabel, "getLabel", lambda *a, text:
(text, True))
# Create new, save, close project
buildTestProject(nwGUI, fncProj)
assert nwGUI.saveProject()
assert nwGUI.closeProject()
assert len(nwGUI.theProject.tree) == 0
assert len(nwGUI.theProject.tree._treeOrder) == 0
assert len(nwGUI.theProject.tree._treeRoots) == 0
assert nwGUI.theProject.tree.trashRoot() is None
assert nwGUI.theProject.projPath is None
assert nwGUI.theProject.projMeta is None
assert nwGUI.theProject.projFile == "nwProject.nwx"
assert nwGUI.theProject.projName == ""
assert nwGUI.theProject.bookTitle == ""
assert len(nwGUI.theProject.bookAuthors) == 0
assert not nwGUI.theProject.spellCheck
# Check the files
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiEditor_Main_Initial_nwProject.nwx")
compFile = os.path.join(refDir, "guiEditor_Main_Initial_nwProject.nwx")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, ignoreStart=XML_IGNORE)
qtbot.wait(stepDelay)
# qtbot.stopForInteraction()
# Re-open project
assert nwGUI.openProject(fncProj)
qtbot.wait(stepDelay)
# Check that we loaded the data
assert len(nwGUI.theProject.tree) == 8
assert len(nwGUI.theProject.tree._treeOrder) == 8
assert len(nwGUI.theProject.tree._treeRoots) == 4
assert nwGUI.theProject.tree.trashRoot() is None
assert nwGUI.theProject.projPath == fncProj
assert nwGUI.theProject.projMeta == os.path.join(fncProj, "meta")
assert nwGUI.theProject.projFile == "nwProject.nwx"
assert nwGUI.theProject.projName == "New Project"
assert nwGUI.theProject.bookTitle == "New Novel"
assert len(nwGUI.theProject.bookAuthors) == 1
assert nwGUI.theProject.spellCheck is False
# Check that tree items have been created
assert nwGUI.projView.projTree._getTreeItem("0000000000008") is not None
assert nwGUI.projView.projTree._getTreeItem("0000000000009") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000a") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000b") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000c") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000d") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000e") is not None
assert nwGUI.projView.projTree._getTreeItem("000000000000f") is not None
nwGUI.mainMenu.aSpellCheck.setChecked(True)
assert nwGUI.mainMenu._toggleSpellCheck()
# Change some settings
nwGUI.mainConf.hideHScroll = True
nwGUI.mainConf.hideVScroll = True
nwGUI.mainConf.autoScrollPos = 80
nwGUI.mainConf.autoScroll = True
# Add a Character File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.projView.projTree.clearSelection()
nwGUI.projView.projTree._getTreeItem("000000000000a").setSelected(True)
nwGUI.projView.projTree.newTreeItem(nwItemType.FILE, None, isNote=True)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Jane Doe":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file about Jane.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Add a Plot File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.projView.projTree.clearSelection()
nwGUI.projView.projTree._getTreeItem("0000000000009").setSelected(True)
nwGUI.projView.projTree.newTreeItem(nwItemType.FILE, None, isNote=True)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Main Plot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file detailing the main plot.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Add a World File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.projView.projTree.clearSelection()
nwGUI.projView.projTree._getTreeItem("000000000000b").setSelected(True)
nwGUI.projView.projTree.newTreeItem(nwItemType.FILE, None, isNote=True)
assert nwGUI.openSelectedItem()
# Add Some Text
nwGUI.docEditor.replaceText("Hello World!")
assert nwGUI.docEditor.getText() == "Hello World!"
nwGUI.docEditor.replaceText("")
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Main Location":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: Home":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file describing Jane's home.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Trigger autosaves before making more changes
nwGUI._autoSaveDocument()
nwGUI._autoSaveProject()
# Select the 'New Scene' file
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.projView.projTree.clearSelection()
nwGUI.projView.projTree._getTreeItem("0000000000008").setExpanded(True)
nwGUI.projView.projTree._getTreeItem("000000000000d").setExpanded(True)
nwGUI.projView.projTree._getTreeItem("000000000000f").setSelected(True)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Novel":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "## Chapter":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@pov: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@plot: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "### Scene":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "% How about a comment?":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@pov: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@plot: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@location: Home":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "#### Some Section":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@char: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a paragraph of nonsense text.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ("This is another paragraph of much longer nonsense text. "
"It is in fact 1 very very NONSENSICAL nonsense text! "):
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "We can also try replacing \"quotes\", even single 'quotes' are replaced. ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "Isn't that nice? ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "We can hyphen-ate, make dashes -- and even longer dashes --- if we want. ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "Ellipsis? Not a problem either ... ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "How about three hyphens - -":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Left, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Backspace, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Right, delay=keyDelay)
for c in "- for long dash? It works too.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "\"Full line double quoted text.\"":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "'Full line single quoted text.'":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "\t\"Tab-indented text\"":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ">\"Paragraph-indented text\"":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ">>\"Right-aligned text\"":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "\t'Tab-indented text'":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ">'Paragraph-indented text'":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ">>'Right-aligned text'":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.wait(stepDelay)
nwGUI.docEditor.wCounterDoc.run()
qtbot.wait(stepDelay)
# Save the document
assert nwGUI.docEditor.docChanged()
assert nwGUI.saveDocument()
assert not nwGUI.docEditor.docChanged()
qtbot.wait(stepDelay)
nwGUI.rebuildIndex()
qtbot.wait(stepDelay)
# Open and view the edited document
nwGUI.switchFocus(nwWidget.VIEWER)
assert nwGUI.openDocument("000000000000f")
assert nwGUI.viewDocument("000000000000f")
qtbot.wait(stepDelay)
assert nwGUI.saveProject()
assert nwGUI.closeDocViewer()
qtbot.wait(stepDelay)
# Check a Quick Create and Delete
assert nwGUI.projView.projTree.newTreeItem(nwItemType.FILE, None)
newHandle = nwGUI.projView.getSelectedHandle()
assert nwGUI.theProject.tree["0000000000020"] is not None
assert nwGUI.projView.deleteItem()
assert nwGUI.projView.setSelectedHandle(newHandle)
assert nwGUI.projView.deleteItem()
assert nwGUI.theProject.tree["0000000000024"] is not None # Trash
assert nwGUI.saveProject()
# Check the files
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiEditor_Main_Final_nwProject.nwx")
compFile = os.path.join(refDir, "guiEditor_Main_Final_nwProject.nwx")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, ignoreStart=XML_IGNORE)
projFile = os.path.join(fncProj, "content", "000000000000f.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_000000000000f.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_000000000000f.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "0000000000020.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_0000000000020.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_0000000000020.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "0000000000021.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_0000000000021.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_0000000000021.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "0000000000022.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_0000000000022.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_0000000000022.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
def testBaseConfig_Init(monkeypatch, tmpDir, fncDir, outDir, refDir):
"""Test config intialisation.
"""
tstConf = Config()
confFile = os.path.join(tmpDir, "novelwriter.conf")
testFile = os.path.join(outDir, "baseConfig_novelwriter.conf")
compFile = os.path.join(refDir, "baseConfig_novelwriter.conf")
# Make sure we don't have any old conf file
if os.path.isfile(confFile):
os.unlink(confFile)
# Let the config class figure out the path
monkeypatch.setattr("PyQt5.QtCore.QStandardPaths.writableLocation", lambda *args: fncDir)
tstConf.verQtValue = 50600
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
tstConf.verQtValue = 50000
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
monkeypatch.undo()
# Fail to make folders
monkeypatch.setattr("os.mkdir", causeOSError)
tstConfDir = os.path.join(fncDir, "test_conf")
tstConf.initConfig(confPath=tstConfDir, dataPath=tmpDir)
assert tstConf.confPath is None
assert tstConf.dataPath == tmpDir
assert not os.path.isfile(confFile)
tstDataDir = os.path.join(fncDir, "test_data")
tstConf.initConfig(confPath=tmpDir, dataPath=tstDataDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath is None
assert os.path.isfile(confFile)
os.unlink(confFile)
monkeypatch.undo()
# Test load/save with no path
tstConf.confPath = None
assert not tstConf.loadConfig()
assert not tstConf.saveConfig()
# Run again and set the paths directly and correctly
# This should create a config file as well
monkeypatch.setattr("os.path.expanduser", lambda *args: "")
tstConf.spellTool = nwConst.SP_INTERNAL
tstConf.initConfig(confPath=tmpDir, dataPath=tmpDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath == tmpDir
assert os.path.isfile(confFile)
copyfile(confFile, testFile)
assert cmpFiles(testFile, compFile, [2, 9])
monkeypatch.undo()
# Load and save with OSError
monkeypatch.setattr("builtins.open", causeOSError)
assert not tstConf.loadConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
assert not tstConf.saveConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
monkeypatch.undo()
assert tstConf.loadConfig()
assert tstConf.saveConfig()
copyfile(confFile, testFile)
assert cmpFiles(testFile, compFile, [2, 9])
def testDlgProjSettings_Dialog(qtbot, monkeypatch, nwGUI, fncDir, fncProj,
outDir, refDir):
"""Test the full project settings dialog.
"""
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiProjSettings_Dialog_nwProject.nwx")
compFile = os.path.join(refDir, "guiProjSettings_Dialog_nwProject.nwx")
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "critical", lambda *args: QMessageBox.Yes)
# Check that we cannot open when there is no project
nwGUI.mainMenu.aProjectSettings.activate(QAction.Trigger)
assert getGuiItem("GuiProjectSettings") is None
# Create new project
nwGUI.theProject.projTree.setSeed(42)
assert nwGUI.newProject({"projPath": fncProj})
nwGUI.mainConf.backupPath = fncDir
nwGUI.theProject.setSpellLang("en")
nwGUI.theProject.setBookAuthors("Jane Smith\nJohn Smith")
nwGUI.theProject.setAutoReplace({"A": "B", "C": "D"})
# Get the dialog object
monkeypatch.setattr(GuiProjectSettings, "exec_", lambda *args: None)
monkeypatch.setattr(GuiProjectSettings, "result",
lambda *args: QDialog.Accepted)
nwGUI.mainMenu.aProjectSettings.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiProjectSettings") is not None,
timeout=1000)
projEdit = getGuiItem("GuiProjectSettings")
assert isinstance(projEdit, GuiProjectSettings)
projEdit.show()
qtbot.addWidget(projEdit)
# Settings Tab
# ============
assert projEdit.tabMain.editName.text() == "New Project"
assert projEdit.tabMain.editTitle.text() == ""
assert projEdit.tabMain.editAuthors.toPlainText(
) == "Jane Smith\nJohn Smith"
assert projEdit.tabMain.spellLang.currentData() == "en"
assert projEdit.tabMain.doBackup.isChecked() is False
qtbot.wait(stepDelay)
projEdit.tabMain.editName.setText("")
for c in "Project Name":
qtbot.keyClick(projEdit.tabMain.editName, c, delay=typeDelay)
for c in "Project Title":
qtbot.keyClick(projEdit.tabMain.editTitle, c, delay=typeDelay)
projEdit.tabMain.editAuthors.clear()
for c in "Jane Doe":
qtbot.keyClick(projEdit.tabMain.editAuthors, c, delay=typeDelay)
qtbot.keyClick(projEdit.tabMain.editAuthors, Qt.Key_Return, delay=keyDelay)
for c in "John Doh":
qtbot.keyClick(projEdit.tabMain.editAuthors, c, delay=typeDelay)
qtbot.keyClick(projEdit.tabMain.editAuthors, Qt.Key_Return, delay=keyDelay)
qtbot.wait(stepDelay)
assert projEdit.tabMain.editName.text() == "Project Name"
assert projEdit.tabMain.editTitle.text() == "Project Title"
assert projEdit.tabMain.editAuthors.toPlainText() == "Jane Doe\nJohn Doh\n"
# Status Tab
# ==========
projEdit._tabBox.setCurrentWidget(projEdit.tabStatus)
assert projEdit.tabStatus.colChanged is False
assert projEdit.tabStatus.getNewList() is None
assert projEdit.tabStatus.listBox.topLevelItemCount() == 4
# Fake drag'n'drop should change changed status
projEdit.tabStatus._rowsMoved()
assert projEdit.tabStatus.colChanged is True
projEdit.tabStatus.colChanged = False
projEdit.tabStatus.listBox.clearSelection()
assert projEdit.tabStatus._getSelectedItem() is None
projEdit.tabStatus.listBox.topLevelItem(0).setSelected(True)
assert isinstance(projEdit.tabStatus._getSelectedItem(), QTreeWidgetItem)
# Can't delete the first item (it's in use)
projEdit.tabStatus.listBox.clearSelection()
projEdit.tabStatus.listBox.topLevelItem(0).setSelected(True)
qtbot.mouseClick(projEdit.tabStatus.delButton, Qt.LeftButton)
assert projEdit.tabStatus.listBox.topLevelItemCount() == 4
# Can delete the third item
projEdit.tabStatus.listBox.clearSelection()
projEdit.tabStatus.listBox.topLevelItem(2).setSelected(True)
qtbot.mouseClick(projEdit.tabStatus.delButton, Qt.LeftButton)
assert projEdit.tabStatus.listBox.topLevelItemCount() == 3
# Add a new item
monkeypatch.setattr(QColorDialog, "getColor",
lambda *args: QColor(20, 30, 40))
qtbot.mouseClick(projEdit.tabStatus.addButton, Qt.LeftButton)
projEdit.tabStatus.listBox.topLevelItem(3).setSelected(True)
for n in range(8):
qtbot.keyClick(projEdit.tabStatus.editName,
Qt.Key_Backspace,
delay=typeDelay)
for c in "Final":
qtbot.keyClick(projEdit.tabStatus.editName, c, delay=typeDelay)
qtbot.mouseClick(projEdit.tabStatus.colButton, Qt.LeftButton)
qtbot.mouseClick(projEdit.tabStatus.saveButton, Qt.LeftButton)
assert projEdit.tabStatus.listBox.topLevelItemCount() == 4
qtbot.wait(stepDelay)
assert projEdit.tabStatus.colChanged is True
assert projEdit.tabStatus.getNewList() == [("New", 100, 100, 100, "New"),
("Note", 200, 50, 0, "Note"),
("Finished", 50, 200, 0,
"Finished"),
("Final", 20, 30, 40, None)]
# Importance Tab
# ==============
projEdit._tabBox.setCurrentWidget(projEdit.tabImport)
projEdit.tabStatus.listBox.clearSelection()
projEdit.tabImport.listBox.topLevelItem(3).setSelected(True)
qtbot.mouseClick(projEdit.tabImport.delButton, Qt.LeftButton)
qtbot.mouseClick(projEdit.tabImport.addButton, Qt.LeftButton)
projEdit.tabStatus.listBox.clearSelection()
projEdit.tabImport.listBox.topLevelItem(3).setSelected(True)
for n in range(8):
qtbot.keyClick(projEdit.tabImport.editName,
Qt.Key_Backspace,
delay=typeDelay)
for c in "Final":
qtbot.keyClick(projEdit.tabImport.editName, c, delay=typeDelay)
qtbot.mouseClick(projEdit.tabImport.saveButton, Qt.LeftButton)
qtbot.wait(stepDelay)
# Auto-Replace Tab
# ================
qtbot.wait(stepDelay)
projEdit._tabBox.setCurrentWidget(projEdit.tabReplace)
assert projEdit.tabReplace.listBox.topLevelItem(0).text(0) == "<A>"
assert projEdit.tabReplace.listBox.topLevelItem(0).text(1) == "B"
assert projEdit.tabReplace.listBox.topLevelItem(1).text(0) == "<C>"
assert projEdit.tabReplace.listBox.topLevelItem(1).text(1) == "D"
qtbot.mouseClick(projEdit.tabReplace.addButton, Qt.LeftButton)
projEdit.tabReplace.listBox.topLevelItem(2).setSelected(True)
projEdit.tabReplace.editKey.setText("")
for c in "Th is ":
qtbot.keyClick(projEdit.tabReplace.editKey, c, delay=typeDelay)
projEdit.tabReplace.editValue.setText("")
for c in "With This Stuff ":
qtbot.keyClick(projEdit.tabReplace.editValue, c, delay=typeDelay)
qtbot.mouseClick(projEdit.tabReplace.saveButton, Qt.LeftButton)
qtbot.wait(stepDelay)
projEdit.tabReplace.listBox.clearSelection()
assert not projEdit.tabReplace._saveEntry()
assert not projEdit.tabReplace._delEntry()
qtbot.mouseClick(projEdit.tabReplace.addButton, Qt.LeftButton)
newIdx = -1
for i in range(projEdit.tabReplace.listBox.topLevelItemCount()):
if projEdit.tabReplace.listBox.topLevelItem(i).text(0) == "<keyword4>":
newIdx = i
break
assert newIdx >= 0
newItem = projEdit.tabReplace.listBox.topLevelItem(newIdx)
projEdit.tabReplace.listBox.setCurrentItem(newItem)
qtbot.mouseClick(projEdit.tabReplace.delButton, Qt.LeftButton)
qtbot.wait(stepDelay)
# Save & Check
# ============
projEdit._doSave()
# Open again, and check project settings
nwGUI.mainMenu.aProjectSettings.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiProjectSettings") is not None,
timeout=1000)
projEdit = getGuiItem("GuiProjectSettings")
assert isinstance(projEdit, GuiProjectSettings)
qtbot.addWidget(projEdit)
assert projEdit.tabMain.editName.text() == "Project Name"
assert projEdit.tabMain.editTitle.text() == "Project Title"
theAuth = projEdit.tabMain.editAuthors.toPlainText().strip().splitlines()
assert len(theAuth) == 2
assert theAuth[0] == "Jane Doe"
assert theAuth[1] == "John Doh"
projEdit._doClose()
qtbot.wait(stepDelay)
assert nwGUI.saveProject()
qtbot.wait(stepDelay)
# Check the files
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 8, 9, 10])
def testDlgItemEditor_Dialog(qtbot, monkeypatch, nwGUI, fncDir, fncProj,
refDir, outDir):
"""Test the full item editor dialog.
"""
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiItemEditor_Dialog_nwProject.nwx")
compFile = os.path.join(refDir, "guiItemEditor_Dialog_nwProject.nwx")
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(GuiProjectTree, "hasFocus", lambda *args: True)
# Create new, save, open project
nwGUI.theProject.projTree.setSeed(42)
assert nwGUI.newProject({"projPath": fncProj})
assert nwGUI.openDocument("0e17daca5f3e1")
assert nwGUI.treeView.setSelectedHandle("0e17daca5f3e1", doScroll=True)
monkeypatch.setattr(GuiItemEditor, "exec_", lambda *args: None)
nwGUI.mainMenu.aEditItem.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiItemEditor") is not None,
timeout=1000)
itemEdit = getGuiItem("GuiItemEditor")
assert isinstance(itemEdit, GuiItemEditor)
itemEdit.show()
qtbot.addWidget(itemEdit)
assert itemEdit.editName.text() == "New Scene"
assert itemEdit.editStatus.currentData() == "New"
assert itemEdit.editLayout.currentData() == nwItemLayout.SCENE
for c in "Just a Page":
qtbot.keyClick(itemEdit.editName, c, delay=typeDelay)
itemEdit.editStatus.setCurrentIndex(1)
layoutIdx = itemEdit.editLayout.findData(nwItemLayout.PAGE)
itemEdit.editLayout.setCurrentIndex(layoutIdx)
itemEdit.editExport.setChecked(False)
assert not itemEdit.editExport.isChecked()
itemEdit._doSave()
nwGUI.mainMenu.aEditItem.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiItemEditor") is not None,
timeout=1000)
itemEdit = getGuiItem("GuiItemEditor")
assert isinstance(itemEdit, GuiItemEditor)
itemEdit.show()
qtbot.addWidget(itemEdit)
assert itemEdit.editName.text() == "Just a Page"
assert itemEdit.editStatus.currentData() == "Note"
assert itemEdit.editLayout.currentData() == nwItemLayout.PAGE
itemEdit._doClose()
# Check that the header is updated
nwGUI.docEditor.updateDocInfo("0e17daca5f3e1")
assert nwGUI.docEditor.docHeader.theTitle.text(
) == "Novel › New Chapter › Just a Page"
assert not nwGUI.docEditor.setCursorLine("where?")
assert nwGUI.docEditor.setCursorLine(2)
qtbot.wait(stepDelay)
assert nwGUI.docEditor.getCursorPosition() == 15
qtbot.wait(stepDelay)
assert nwGUI.saveProject()
qtbot.wait(stepDelay)
# Check the files
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
def testDlgPreferences_Main(qtbot, monkeypatch, fncDir, outDir, refDir):
"""Test the load project wizard.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "warning", lambda *a: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "question", lambda *a: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information", lambda *a: QMessageBox.Yes)
# Must create a clean config and GUI object as the test-wide
# novelwriter.CONFIG object is created on import an can be tainted by other tests
confFile = os.path.join(fncDir, "novelwriter.conf")
if os.path.isfile(confFile):
os.unlink(confFile)
theConf = Config()
theConf.initConfig(fncDir, fncDir)
theConf.setLastPath("")
origConf = novelwriter.CONFIG
novelwriter.CONFIG = theConf
nwGUI = novelwriter.main(
["--testmode",
"--config=%s" % fncDir,
"--data=%s" % fncDir])
qtbot.addWidget(nwGUI)
nwGUI.show()
qtbot.wait(stepDelay)
theConf = nwGUI.mainConf
assert theConf.confPath == fncDir
monkeypatch.setattr(GuiPreferences, "exec_", lambda *a: None)
monkeypatch.setattr(GuiPreferences, "result", lambda *a: QDialog.Accepted)
monkeypatch.setattr(nwGUI.docEditor.spEnchant, "listDictionaries",
lambda: [("en", "none")])
nwGUI.mainMenu.aPreferences.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiPreferences") is not None,
timeout=1000)
nwPrefs = getGuiItem("GuiPreferences")
assert isinstance(nwPrefs, GuiPreferences)
nwPrefs.show()
assert nwPrefs.mainConf.confPath == fncDir
# General Settings
qtbot.wait(keyDelay)
tabGeneral = nwPrefs.tabGeneral
nwPrefs._tabBox.setCurrentWidget(tabGeneral)
qtbot.wait(keyDelay)
assert tabGeneral.showFullPath.isChecked()
qtbot.mouseClick(tabGeneral.showFullPath, Qt.LeftButton)
assert not tabGeneral.showFullPath.isChecked()
qtbot.wait(keyDelay)
assert not tabGeneral.hideVScroll.isChecked()
qtbot.mouseClick(tabGeneral.hideVScroll, Qt.LeftButton)
assert tabGeneral.hideVScroll.isChecked()
qtbot.wait(keyDelay)
assert not tabGeneral.hideHScroll.isChecked()
qtbot.mouseClick(tabGeneral.hideHScroll, Qt.LeftButton)
assert tabGeneral.hideHScroll.isChecked()
# Check font button
monkeypatch.setattr(QFontDialog, "getFont", lambda font, obj: (font, True))
qtbot.mouseClick(tabGeneral.fontButton, Qt.LeftButton)
qtbot.wait(keyDelay)
tabGeneral.guiFontSize.setValue(12)
# Projects Settings
qtbot.wait(keyDelay)
tabProjects = nwPrefs.tabProjects
nwPrefs._tabBox.setCurrentWidget(tabProjects)
tabProjects.backupPath = "no/where"
qtbot.wait(keyDelay)
assert not tabProjects.backupOnClose.isChecked()
qtbot.mouseClick(tabProjects.backupOnClose, Qt.LeftButton)
assert tabProjects.backupOnClose.isChecked()
# qtbot.stopForInteraction()
# Check Browse button
monkeypatch.setattr(QFileDialog, "getExistingDirectory",
lambda *a, **k: "")
assert not tabProjects._backupFolder()
monkeypatch.setattr(QFileDialog, "getExistingDirectory",
lambda *a, **k: "some/dir")
qtbot.mouseClick(tabProjects.backupGetPath, Qt.LeftButton)
qtbot.wait(keyDelay)
tabProjects.autoSaveDoc.setValue(20)
tabProjects.autoSaveProj.setValue(40)
# Document Settings
qtbot.wait(keyDelay)
tabDocs = nwPrefs.tabDocs
nwPrefs._tabBox.setCurrentWidget(tabDocs)
qtbot.wait(keyDelay)
qtbot.mouseClick(tabDocs.fontButton, Qt.LeftButton)
qtbot.wait(keyDelay)
tabDocs.textSize.setValue(13)
tabDocs.textWidth.setValue(700)
tabDocs.focusWidth.setValue(900)
tabDocs.textMargin.setValue(45)
tabDocs.tabWidth.setValue(45)
qtbot.wait(keyDelay)
assert not tabDocs.hideFocusFooter.isChecked()
qtbot.mouseClick(tabDocs.hideFocusFooter, Qt.LeftButton)
assert tabDocs.hideFocusFooter.isChecked()
qtbot.wait(keyDelay)
assert not tabDocs.doJustify.isChecked()
qtbot.mouseClick(tabDocs.doJustify, Qt.LeftButton)
assert tabDocs.doJustify.isChecked()
# Editor Settings
qtbot.wait(keyDelay)
tabEditor = nwPrefs.tabEditor
nwPrefs._tabBox.setCurrentWidget(tabEditor)
qtbot.wait(keyDelay)
assert not tabEditor.showTabsNSpaces.isChecked()
qtbot.mouseClick(tabEditor.showTabsNSpaces, Qt.LeftButton)
assert tabEditor.showTabsNSpaces.isChecked()
qtbot.wait(keyDelay)
assert not tabEditor.showLineEndings.isChecked()
qtbot.mouseClick(tabEditor.showLineEndings, Qt.LeftButton)
assert tabEditor.showLineEndings.isChecked()
qtbot.wait(keyDelay)
assert not tabEditor.autoScroll.isChecked()
qtbot.mouseClick(tabEditor.autoScroll, Qt.LeftButton)
assert tabEditor.autoScroll.isChecked()
qtbot.wait(keyDelay)
tabEditor.scrollPastEnd.setValue(0)
qtbot.wait(keyDelay)
tabEditor.bigDocLimit.setValue(500)
# Syntax Settings
qtbot.wait(keyDelay)
tabSyntax = nwPrefs.tabSyntax
nwPrefs._tabBox.setCurrentWidget(tabSyntax)
qtbot.wait(keyDelay)
assert tabSyntax.highlightQuotes.isChecked()
qtbot.mouseClick(tabSyntax.highlightQuotes, Qt.LeftButton)
assert not tabSyntax.highlightQuotes.isChecked()
qtbot.wait(keyDelay)
assert tabSyntax.highlightEmph.isChecked()
qtbot.mouseClick(tabSyntax.highlightEmph, Qt.LeftButton)
assert not tabSyntax.highlightEmph.isChecked()
# Automation Settings
qtbot.wait(keyDelay)
tabAuto = nwPrefs.tabAuto
nwPrefs._tabBox.setCurrentWidget(tabAuto)
qtbot.wait(keyDelay)
assert tabAuto.autoSelect.isChecked()
qtbot.mouseClick(tabAuto.autoSelect, Qt.LeftButton)
assert not tabAuto.autoSelect.isChecked()
qtbot.wait(keyDelay)
assert tabAuto.doReplace.isChecked()
qtbot.mouseClick(tabAuto.doReplace, Qt.LeftButton)
assert not tabAuto.doReplace.isChecked()
qtbot.wait(keyDelay)
assert not tabAuto.doReplaceSQuote.isEnabled()
assert not tabAuto.doReplaceDQuote.isEnabled()
assert not tabAuto.doReplaceDash.isEnabled()
assert not tabAuto.doReplaceDots.isEnabled()
# Quotation Style
qtbot.wait(keyDelay)
tabQuote = nwPrefs.tabQuote
nwPrefs._tabBox.setCurrentWidget(tabQuote)
monkeypatch.setattr(GuiQuoteSelect, "selectedQuote", "'")
monkeypatch.setattr(GuiQuoteSelect, "exec_",
lambda *args: QDialog.Accepted)
qtbot.mouseClick(tabQuote.btnDoubleStyleC, Qt.LeftButton)
# Save and Check Config
qtbot.mouseClick(nwPrefs.buttonBox.button(QDialogButtonBox.Ok),
Qt.LeftButton)
nwPrefs._doClose()
assert theConf.confChanged
theConf.lastPath = ""
assert nwGUI.mainConf.saveConfig()
projFile = os.path.join(fncDir, "novelwriter.conf")
testFile = os.path.join(outDir, "guiPreferences_novelwriter.conf")
compFile = os.path.join(refDir, "guiPreferences_novelwriter.conf")
copyfile(projFile, testFile)
ignTuple = ("timestamp", "guifont", "lastnotes", "guilang", "geometry",
"preferences", "treecols", "novelcols", "projcols", "mainpane",
"docpane", "viewpane", "outlinepane", "textfont", "textsize")
assert cmpFiles(testFile, compFile, ignoreStart=ignTuple)
# Clean up
novelwriter.CONFIG = origConf
nwGUI.closeMain()
def testBaseConfig_SettersGetters(tmpConf, tmpDir, outDir, refDir):
"""Set various sizes and positions
"""
confFile = os.path.join(tmpDir, "novelwriter.conf")
testFile = os.path.join(outDir, "baseConfig_novelwriter.conf")
compFile = os.path.join(refDir, "baseConfig_novelwriter.conf")
# GUI Scaling
# ===========
tmpConf.guiScale = 1.0
assert tmpConf.pxInt(10) == 10
assert tmpConf.pxInt(13) == 13
assert tmpConf.rpxInt(10) == 10
assert tmpConf.rpxInt(13) == 13
tmpConf.guiScale = 2.0
assert tmpConf.pxInt(10) == 20
assert tmpConf.pxInt(13) == 26
assert tmpConf.rpxInt(10) == 5
assert tmpConf.rpxInt(13) == 6
# Setter + Getter Combos
# ======================
# Window Size
tmpConf.guiScale = 1.0
assert tmpConf.setWinSize(1205, 655)
assert not tmpConf.confChanged
tmpConf.guiScale = 2.0
assert tmpConf.setWinSize(70, 70)
assert tmpConf.getWinSize() == [70, 70]
assert tmpConf.winGeometry == [35, 35]
tmpConf.guiScale = 1.0
assert tmpConf.setWinSize(70, 70)
assert tmpConf.getWinSize() == [70, 70]
assert tmpConf.winGeometry == [70, 70]
assert tmpConf.setWinSize(1200, 650)
# Project Tree Columns
tmpConf.guiScale = 2.0
assert tmpConf.setTreeColWidths([10, 20, 25])
assert tmpConf.getTreeColWidths() == [10, 20, 24]
assert tmpConf.treeColWidth == [5, 10, 12]
tmpConf.guiScale = 1.0
assert tmpConf.setTreeColWidths([10, 20, 25])
assert tmpConf.getTreeColWidths() == [10, 20, 25]
assert tmpConf.treeColWidth == [10, 20, 25]
assert tmpConf.setTreeColWidths([200, 50, 30])
# Novel Tree Columns
tmpConf.guiScale = 2.0
assert tmpConf.setNovelColWidths([10, 20])
assert tmpConf.getNovelColWidths() == [10, 20]
assert tmpConf.novelColWidth == [5, 10]
tmpConf.guiScale = 1.0
assert tmpConf.setNovelColWidths([10, 20])
assert tmpConf.getNovelColWidths() == [10, 20]
assert tmpConf.novelColWidth == [10, 20]
assert tmpConf.setNovelColWidths([200, 50])
# Project Settings Tree Columns
tmpConf.guiScale = 2.0
assert tmpConf.setProjColWidths([10, 20, 30])
assert tmpConf.getProjColWidths() == [10, 20, 30]
assert tmpConf.projColWidth == [5, 10, 15]
tmpConf.guiScale = 1.0
assert tmpConf.setProjColWidths([10, 20, 30])
assert tmpConf.getProjColWidths() == [10, 20, 30]
assert tmpConf.projColWidth == [10, 20, 30]
assert tmpConf.setProjColWidths([200, 60, 140])
# Main Pane Splitter
tmpConf.guiScale = 2.0
assert tmpConf.setMainPanePos([200, 700])
assert tmpConf.getMainPanePos() == [200, 700]
assert tmpConf.mainPanePos == [100, 350]
tmpConf.guiScale = 1.0
assert tmpConf.setMainPanePos([200, 700])
assert tmpConf.getMainPanePos() == [200, 700]
assert tmpConf.mainPanePos == [200, 700]
assert tmpConf.setMainPanePos([300, 800])
# Doc Pane Splitter
tmpConf.guiScale = 2.0
assert tmpConf.setDocPanePos([300, 300])
assert tmpConf.getDocPanePos() == [300, 300]
assert tmpConf.docPanePos == [150, 150]
tmpConf.guiScale = 1.0
assert tmpConf.setDocPanePos([300, 300])
assert tmpConf.getDocPanePos() == [300, 300]
assert tmpConf.docPanePos == [300, 300]
assert tmpConf.setDocPanePos([400, 400])
# View Pane Splitter
tmpConf.guiScale = 2.0
assert tmpConf.setViewPanePos([400, 250])
assert tmpConf.getViewPanePos() == [400, 250]
assert tmpConf.viewPanePos == [200, 125]
tmpConf.guiScale = 1.0
assert tmpConf.setViewPanePos([400, 250])
assert tmpConf.getViewPanePos() == [400, 250]
assert tmpConf.viewPanePos == [400, 250]
assert tmpConf.setViewPanePos([500, 150])
# Outline Pane Splitter
tmpConf.guiScale = 2.0
assert tmpConf.setOutlinePanePos([400, 250])
assert tmpConf.getOutlinePanePos() == [400, 250]
assert tmpConf.outlnPanePos == [200, 125]
tmpConf.guiScale = 1.0
assert tmpConf.setOutlinePanePos([400, 250])
assert tmpConf.getOutlinePanePos() == [400, 250]
assert tmpConf.outlnPanePos == [400, 250]
assert tmpConf.setOutlinePanePos([500, 150])
# Getters Only
# ============
tmpConf.guiScale = 1.0
assert tmpConf.getTextWidth() == 600
assert tmpConf.getTextMargin() == 40
assert tmpConf.getTabWidth() == 40
assert tmpConf.getFocusWidth() == 800
tmpConf.guiScale = 2.0
assert tmpConf.getTextWidth() == 1200
assert tmpConf.getTextMargin() == 80
assert tmpConf.getTabWidth() == 80
assert tmpConf.getFocusWidth() == 1600
# Flag Setters
# ============
assert not tmpConf.setShowRefPanel(False)
assert not tmpConf.showRefPanel
assert tmpConf.setShowRefPanel(True)
assert not tmpConf.setViewComments(False)
assert not tmpConf.viewComments
assert tmpConf.setViewComments(True)
assert not tmpConf.setViewSynopsis(False)
assert not tmpConf.viewSynopsis
assert tmpConf.setViewSynopsis(True)
# Check Final File
# ================
assert tmpConf.confChanged
assert tmpConf.saveConfig()
assert not tmpConf.confChanged
copyfile(confFile, testFile)
assert cmpFiles(testFile, compFile, [2, 9, 10])
def testCoreIndex_LoadSave(monkeypatch, nwLipsum, dummyGUI, outDir, refDir):
"""Test core functionality of scaning, saving, loading and checking
the index cache file.
"""
projFile = os.path.join(nwLipsum, "meta", "tagsIndex.json")
testFile = os.path.join(outDir, "coreIndex_LoadSave_tagsIndex.json")
compFile = os.path.join(refDir, "coreIndex_LoadSave_tagsIndex.json")
theProject = NWProject(dummyGUI)
theProject.projTree.setSeed(42)
assert theProject.openProject(nwLipsum)
monkeypatch.setattr("nw.core.index.time", lambda: 123.4)
theIndex = NWIndex(theProject, dummyGUI)
notIndexable = {
"b3643d0f92e32": False, # Novel ROOT
"45e6b01ca35c1": False, # Chapter One FOLDER
"6bd935d2490cd": False, # Chapter Two FOLDER
"67a8707f2f249": False, # Character ROOT
"6c6afb1247750": False, # Plot ROOT
"60bdf227455cc": False, # World ROOT
}
for tItem in theProject.projTree:
assert theIndex.reIndexHandle(tItem.itemHandle) is notIndexable.get(
tItem.itemHandle, True)
assert not theIndex.reIndexHandle(None)
# Dummy exception function
def doPanic(*arg, **kwargs):
raise Exception
# Make the save fail
monkeypatch.setattr(json, "dump", doPanic)
assert not theIndex.saveIndex()
# Make the save pass
monkeypatch.undo()
assert theIndex.saveIndex()
# Take a copy of the index
tagIndex = str(theIndex.tagIndex)
refIndex = str(theIndex.refIndex)
novelIndex = str(theIndex.novelIndex)
noteIndex = str(theIndex.noteIndex)
textCounts = str(theIndex.textCounts)
# Delete a handle
assert theIndex.tagIndex.get("Bod", None) is not None
assert theIndex.refIndex.get("4c4f28287af27", None) is not None
assert theIndex.noteIndex.get("4c4f28287af27", None) is not None
assert theIndex.textCounts.get("4c4f28287af27", None) is not None
theIndex.deleteHandle("4c4f28287af27")
assert theIndex.tagIndex.get("Bod", None) is None
assert theIndex.refIndex.get("4c4f28287af27", None) is None
assert theIndex.noteIndex.get("4c4f28287af27", None) is None
assert theIndex.textCounts.get("4c4f28287af27", None) is None
# Clear the index
theIndex.clearIndex()
assert not theIndex.tagIndex
assert not theIndex.refIndex
assert not theIndex.novelIndex
assert not theIndex.noteIndex
assert not theIndex.textCounts
# Make the load fail
monkeypatch.setattr(json, "load", doPanic)
assert not theIndex.loadIndex()
# Make the load pass
monkeypatch.undo()
assert theIndex.loadIndex()
assert str(theIndex.tagIndex) == tagIndex
assert str(theIndex.refIndex) == refIndex
assert str(theIndex.novelIndex) == novelIndex
assert str(theIndex.noteIndex) == noteIndex
assert str(theIndex.textCounts) == textCounts
# Break the index and check that we notice
assert not theIndex.indexBroken
theIndex.tagIndex["Bod"].append("Stuff") # No longer len() == 4
theIndex.checkIndex()
assert theIndex.indexBroken
assert theIndex.loadIndex()
assert not theIndex.indexBroken
theIndex.refIndex["fb609cd8319dc"]["T000001"]["tags"].append(
"Stuff") # No longer len() == 3
theIndex.checkIndex()
assert theIndex.indexBroken
assert theIndex.loadIndex()
assert not theIndex.indexBroken
theIndex.novelIndex["7a992350f3eb6"]["T000001"][
"Stuff"] = "" # No longer len(keys()) == 8
theIndex.checkIndex()
assert theIndex.indexBroken
assert theIndex.loadIndex()
assert not theIndex.indexBroken
theIndex.noteIndex["4c4f28287af27"]["T000001"][
"Stuff"] = "" # No longer len(keys()) == 8
theIndex.checkIndex()
assert theIndex.indexBroken
assert theIndex.loadIndex()
assert not theIndex.indexBroken
theIndex.textCounts["7a992350f3eb6"].append(
"Stuff") # No longer len() == 3
theIndex.checkIndex()
assert theIndex.indexBroken
# Make the try/except trigger as well
assert theIndex.loadIndex()
assert not theIndex.indexBroken
theIndex.refIndex["fb609cd8319dc"]["T000001"] = {
"tagssss": []
} # Wrong key name
theIndex.checkIndex()
assert theIndex.indexBroken
# Finalise
assert theProject.closeProject()
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
def testBaseConfig_Init(monkeypatch, tmpDir, fncDir, outDir, refDir, filesDir):
"""Test config intialisation.
"""
tstConf = Config()
confFile = os.path.join(tmpDir, "novelwriter.conf")
testFile = os.path.join(outDir, "baseConfig_novelwriter.conf")
compFile = os.path.join(refDir, "baseConfig_novelwriter.conf")
# Make sure we don't have any old conf file
if os.path.isfile(confFile):
os.unlink(confFile)
# Let the config class figure out the path
with monkeypatch.context() as mp:
mp.setattr("PyQt5.QtCore.QStandardPaths.writableLocation",
lambda *a: fncDir)
tstConf.verQtValue = 50600
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
tstConf.verQtValue = 50000
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
# Fail to make folders
with monkeypatch.context() as mp:
mp.setattr("os.mkdir", causeOSError)
tstConfDir = os.path.join(fncDir, "test_conf")
tstConf.initConfig(confPath=tstConfDir, dataPath=tmpDir)
assert tstConf.confPath is None
assert tstConf.dataPath == tmpDir
assert not os.path.isfile(confFile)
tstDataDir = os.path.join(fncDir, "test_data")
tstConf.initConfig(confPath=tmpDir, dataPath=tstDataDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath is None
assert os.path.isfile(confFile)
os.unlink(confFile)
# Test load/save with no path
tstConf.confPath = None
assert tstConf.loadConfig() is False
assert tstConf.saveConfig() is False
# Run again and set the paths directly and correctly
# This should create a config file as well
with monkeypatch.context() as mp:
mp.setattr("os.path.expanduser", lambda *a: "")
tstConf.initConfig(confPath=tmpDir, dataPath=tmpDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath == tmpDir
assert os.path.isfile(confFile)
copyfile(confFile, testFile)
assert cmpFiles(testFile,
compFile,
ignoreStart=("timestamp", "lastnotes", "guilang"))
# Load and save with OSError
with monkeypatch.context() as mp:
mp.setattr("builtins.open", causeOSError)
assert not tstConf.loadConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
assert not tstConf.saveConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
# Check handling of novelWriter as a package
with monkeypatch.context() as mp:
tstConf.initConfig(confPath=tmpDir, dataPath=tmpDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath == tmpDir
appRoot = tstConf.appRoot
mp.setattr("os.path.isfile", lambda *a: True)
tstConf.initConfig(confPath=tmpDir, dataPath=tmpDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath == tmpDir
assert tstConf.appRoot == os.path.dirname(appRoot)
assert tstConf.appPath == os.path.dirname(appRoot)
assert tstConf.loadConfig() is True
assert tstConf.saveConfig() is True
# Test Correcting Quote Settings
origDbl = tstConf.fmtDoubleQuotes
origSng = tstConf.fmtSingleQuotes
orDoDbl = tstConf.doReplaceDQuote
orDoSng = tstConf.doReplaceSQuote
tstConf.fmtDoubleQuotes = ["\"", "\""]
tstConf.fmtSingleQuotes = ["'", "'"]
tstConf.doReplaceDQuote = True
tstConf.doReplaceSQuote = True
assert tstConf.saveConfig() is True
assert tstConf.loadConfig() is True
assert tstConf.doReplaceDQuote is False
assert tstConf.doReplaceSQuote is False
tstConf.fmtDoubleQuotes = origDbl
tstConf.fmtSingleQuotes = origSng
tstConf.doReplaceDQuote = orDoDbl
tstConf.doReplaceSQuote = orDoSng
assert tstConf.saveConfig() is True
# Test Correcting icon theme
origIcons = tstConf.guiIcons
tstConf.guiIcons = "typicons_colour_dark"
assert tstConf.saveConfig() is True
assert tstConf.loadConfig() is True
assert tstConf.guiIcons == "typicons_dark"
tstConf.guiIcons = "typicons_grey_dark"
assert tstConf.saveConfig() is True
assert tstConf.loadConfig() is True
assert tstConf.guiIcons == "typicons_dark"
tstConf.guiIcons = "typicons_colour_light"
assert tstConf.saveConfig() is True
assert tstConf.loadConfig() is True
assert tstConf.guiIcons == "typicons_light"
tstConf.guiIcons = "typicons_grey_light"
assert tstConf.saveConfig() is True
assert tstConf.loadConfig() is True
assert tstConf.guiIcons == "typicons_light"
tstConf.guiIcons = origIcons
assert tstConf.saveConfig()
# Localisation
# ============
i18nDir = os.path.join(fncDir, "i18n")
os.mkdir(i18nDir)
os.mkdir(os.path.join(i18nDir, "stuff"))
tstConf.nwLangPath = i18nDir
copyfile(os.path.join(filesDir, "nw_en_GB.qm"),
os.path.join(i18nDir, "nw_en_GB.qm"))
writeFile(os.path.join(i18nDir, "nw_en_GB.ts"), "")
writeFile(os.path.join(i18nDir, "nw_abcd.qm"), "")
tstApp = MockApp()
tstConf.initLocalisation(tstApp)
# Check Lists
theList = tstConf.listLanguages(tstConf.LANG_NW)
assert theList == [("en_GB", "British English")]
theList = tstConf.listLanguages(tstConf.LANG_PROJ)
assert theList == [("en_GB", "British English")]
theList = tstConf.listLanguages(None)
assert theList == []
# Add Language
copyfile(os.path.join(filesDir, "nw_en_GB.qm"),
os.path.join(i18nDir, "nw_fr.qm"))
writeFile(os.path.join(i18nDir, "nw_fr.ts"), "")
theList = tstConf.listLanguages(tstConf.LANG_NW)
assert theList == [("en_GB", "British English"), ("fr", "Français")]
copyfile(confFile, testFile)
assert cmpFiles(testFile,
compFile,
ignoreStart=("timestamp", "lastnotes", "guilang"))
def testCoreToOdt_SaveFull(mockGUI, fncDir, outDir, refDir):
"""Test the document save functions.
"""
theProject = NWProject(mockGUI)
theDoc = ToOdt(theProject, isFlat=False)
theDoc._isNovel = True
theDoc._theText = ("## Chapter One\n\n"
"Text\n\n"
"## Chapter Two\n\n"
"Text\n\n")
theDoc.tokenizeText()
theDoc.initDocument()
theDoc.doConvert()
theDoc.closeDocument()
fullFile = os.path.join(fncDir, "document.odt")
theDoc.saveOpenDocText(fullFile)
assert os.path.isfile(fullFile)
assert zipfile.is_zipfile(fullFile)
maniFile = os.path.join(outDir, "coreToOdt_SaveFull_manifest.xml")
settFile = os.path.join(outDir, "coreToOdt_SaveFull_settings.xml")
contFile = os.path.join(outDir, "coreToOdt_SaveFull_content.xml")
metaFile = os.path.join(outDir, "coreToOdt_SaveFull_meta.xml")
stylFile = os.path.join(outDir, "coreToOdt_SaveFull_styles.xml")
maniComp = os.path.join(refDir, "coreToOdt_SaveFull_manifest.xml")
settComp = os.path.join(refDir, "coreToOdt_SaveFull_settings.xml")
contComp = os.path.join(refDir, "coreToOdt_SaveFull_content.xml")
metaComp = os.path.join(refDir, "coreToOdt_SaveFull_meta.xml")
stylComp = os.path.join(refDir, "coreToOdt_SaveFull_styles.xml")
extaxtTo = os.path.join(outDir, "coreToOdt_SaveFull")
with zipfile.ZipFile(fullFile, mode="r") as theZip:
theZip.extract("META-INF/manifest.xml", extaxtTo)
theZip.extract("settings.xml", extaxtTo)
theZip.extract("content.xml", extaxtTo)
theZip.extract("meta.xml", extaxtTo)
theZip.extract("styles.xml", extaxtTo)
maniOut = os.path.join(outDir, "coreToOdt_SaveFull", "META-INF",
"manifest.xml")
settOut = os.path.join(outDir, "coreToOdt_SaveFull", "settings.xml")
contOut = os.path.join(outDir, "coreToOdt_SaveFull", "content.xml")
metaOut = os.path.join(outDir, "coreToOdt_SaveFull", "meta.xml")
stylOut = os.path.join(outDir, "coreToOdt_SaveFull", "styles.xml")
def prettifyXml(inFile, outFile):
with open(outFile, mode="wb") as fileStream:
fileStream.write(
etree.tostring(etree.parse(inFile),
pretty_print=True,
encoding="utf-8",
xml_declaration=True))
prettifyXml(maniOut, maniFile)
prettifyXml(settOut, settFile)
prettifyXml(contOut, contFile)
prettifyXml(metaOut, metaFile)
prettifyXml(stylOut, stylFile)
assert cmpFiles(maniFile, maniComp)
assert cmpFiles(settFile, settComp)
assert cmpFiles(contFile, contComp)
assert cmpFiles(metaFile, metaComp, [4, 5])
assert cmpFiles(stylFile, stylComp)
def testGuiBuild_Tool(qtbot, monkeypatch, nwGUI, nwLipsum, refDir, outDir):
"""Test the build tool.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information",
lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QFileDialog, "getSaveFileName",
lambda a, b, c, **kwargs: (c, None))
# Check that we cannot open when there is no project
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
assert getGuiItem("GuiBuildNovel") is None
# Open a project
assert nwGUI.openProject(nwLipsum)
nwGUI.mainConf.lastPath = nwLipsum
# Open the tool
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiBuildNovel") is not None,
timeout=1000)
nwBuild = getGuiItem("GuiBuildNovel")
assert isinstance(nwBuild, GuiBuildNovel)
# Default Settings
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Change Title Formats and Flip Switches
nwBuild.fmtChapter.setText(r"Chapter %chw%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtScene.setText(r"Scene %ch%.%sc%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtSection.setText(r"%ch%.%sc%.1: %title%")
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.justifyText, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeSynopsis, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeComments, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeKeywords, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.noteFiles, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.ignoreFlag, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Replace Tabs with Spaces
qtbot.mouseClick(nwBuild.replaceTabs, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
# Save files that can be compared
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Putline Mode
nwBuild.fmtChapter.setText(r"Chapter %chw%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtScene.setText(r"Scene %sca%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtSection.setText(r"Section: %title%")
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeComments, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.noteFiles, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.ignoreFlag, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeBody, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
# Save files that can be compared
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Check the JSON files too at this stage
assert nwBuild._saveDocument(nwBuild.FMT_JSON_H)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.json")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4H_Lorem_Ipsum.json")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4H_Lorem_Ipsum.json")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [8])
assert nwBuild._saveDocument(nwBuild.FMT_JSON_M)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.json")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4M_Lorem_Ipsum.json")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4M_Lorem_Ipsum.json")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [8])
# Save other file types handled by Qt
# We assume the export itself by the Qt library works, so we just
# check that novelWriter successfully writes the files.
assert nwBuild._saveDocument(nwBuild.FMT_ODT)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.odt"))
if not nwGUI.mainConf.osDarwin:
assert nwBuild._saveDocument(nwBuild.FMT_PDF)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.pdf"))
assert nwBuild._saveDocument(nwBuild.FMT_MD)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.md"))
assert nwBuild._saveDocument(nwBuild.FMT_TXT)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.txt"))
# Close the build tool
htmlText = nwBuild.htmlText
htmlStyle = nwBuild.htmlStyle
nwdText = nwBuild.nwdText
buildTime = nwBuild.buildTime
nwBuild._doClose()
# Re-open build dialog from cahce
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiBuildNovel") is not None,
timeout=1000)
nwBuild = getGuiItem("GuiBuildNovel")
assert isinstance(nwBuild, GuiBuildNovel)
assert nwBuild.viewCachedDoc()
assert nwBuild.htmlText == htmlText
assert nwBuild.htmlStyle == htmlStyle
assert nwBuild.nwdText == nwdText
assert nwBuild.buildTime == buildTime
nwBuild._doClose()
def testGuiPreferences_Main(qtbot, monkeypatch, fncDir, outDir, refDir):
"""Test the load project wizard.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information",
lambda *args: QMessageBox.Yes)
# Must create a clean config and GUI object as the test-wide
# nw.CONFIG object is created on import an can be tainted by other tests
confFile = os.path.join(fncDir, "novelwriter.conf")
if os.path.isfile(confFile):
os.unlink(confFile)
theConf = Config()
theConf.initConfig(fncDir, fncDir)
theConf.setLastPath("")
origConf = nw.CONFIG
nw.CONFIG = theConf
nwGUI = nw.main(
["--testmode",
"--config=%s" % fncDir,
"--data=%s" % fncDir])
qtbot.addWidget(nwGUI)
nwGUI.show()
qtbot.waitForWindowShown(nwGUI)
qtbot.wait(20)
theConf = nwGUI.mainConf
assert theConf.confPath == fncDir
monkeypatch.setattr(GuiPreferences, "exec_", lambda *args: None)
monkeypatch.setattr(GuiPreferences, "result",
lambda *args: QDialog.Accepted)
nwGUI.mainMenu.aPreferences.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiPreferences") is not None,
timeout=1000)
nwPrefs = getGuiItem("GuiPreferences")
assert isinstance(nwPrefs, GuiPreferences)
nwPrefs.show()
assert nwPrefs.mainConf.confPath == fncDir
# qtbot.stopForInteraction()
# General Settings
qtbot.wait(keyDelay)
tabGeneral = nwPrefs.tabGeneral
nwPrefs._tabBox.setCurrentWidget(tabGeneral)
qtbot.wait(keyDelay)
assert not tabGeneral.preferDarkIcons.isChecked()
qtbot.mouseClick(tabGeneral.preferDarkIcons, Qt.LeftButton)
assert tabGeneral.preferDarkIcons.isChecked()
qtbot.wait(keyDelay)
assert tabGeneral.showFullPath.isChecked()
qtbot.mouseClick(tabGeneral.showFullPath, Qt.LeftButton)
assert not tabGeneral.showFullPath.isChecked()
qtbot.wait(keyDelay)
assert not tabGeneral.hideVScroll.isChecked()
qtbot.mouseClick(tabGeneral.hideVScroll, Qt.LeftButton)
assert tabGeneral.hideVScroll.isChecked()
qtbot.wait(keyDelay)
assert not tabGeneral.hideHScroll.isChecked()
qtbot.mouseClick(tabGeneral.hideHScroll, Qt.LeftButton)
assert tabGeneral.hideHScroll.isChecked()
# Check font button
monkeypatch.setattr(QFontDialog, "getFont", lambda font, obj: (font, True))
qtbot.mouseClick(tabGeneral.fontButton, Qt.LeftButton)
qtbot.wait(keyDelay)
tabGeneral.guiFontSize.setValue(12)
# Projects Settings
qtbot.wait(keyDelay)
tabProjects = nwPrefs.tabProjects
nwPrefs._tabBox.setCurrentWidget(tabProjects)
tabProjects.backupPath = "no/where"
qtbot.wait(keyDelay)
assert not tabProjects.backupOnClose.isChecked()
qtbot.mouseClick(tabProjects.backupOnClose, Qt.LeftButton)
assert tabProjects.backupOnClose.isChecked()
# Check Browse button
monkeypatch.setattr(QFileDialog, "getExistingDirectory",
lambda *args, **kwargs: "")
assert not tabProjects._backupFolder()
monkeypatch.setattr(QFileDialog, "getExistingDirectory",
lambda *args, **kwargs: "some/dir")
qtbot.mouseClick(tabProjects.backupGetPath, Qt.LeftButton)
qtbot.wait(keyDelay)
tabProjects.autoSaveDoc.setValue(20)
tabProjects.autoSaveProj.setValue(40)
# Text Layout Settings
qtbot.wait(keyDelay)
tabLayout = nwPrefs.tabLayout
nwPrefs._tabBox.setCurrentWidget(tabLayout)
qtbot.wait(keyDelay)
qtbot.mouseClick(tabLayout.fontButton, Qt.LeftButton)
qtbot.wait(keyDelay)
tabLayout.textStyleSize.setValue(13)
tabLayout.textFlowMax.setValue(700)
tabLayout.focusDocWidth.setValue(900)
tabLayout.textMargin.setValue(45)
tabLayout.tabWidth.setValue(45)
qtbot.wait(keyDelay)
assert not tabLayout.textFlowFixed.isChecked()
qtbot.mouseClick(tabLayout.textFlowFixed, Qt.LeftButton)
assert tabLayout.textFlowFixed.isChecked()
qtbot.wait(keyDelay)
assert not tabLayout.hideFocusFooter.isChecked()
qtbot.mouseClick(tabLayout.hideFocusFooter, Qt.LeftButton)
assert tabLayout.hideFocusFooter.isChecked()
qtbot.wait(keyDelay)
assert not tabLayout.textJustify.isChecked()
qtbot.mouseClick(tabLayout.textJustify, Qt.LeftButton)
assert tabLayout.textJustify.isChecked()
qtbot.wait(keyDelay)
assert tabLayout.scrollPastEnd.isChecked()
qtbot.mouseClick(tabLayout.scrollPastEnd, Qt.LeftButton)
assert not tabLayout.scrollPastEnd.isChecked()
qtbot.wait(keyDelay)
assert not tabLayout.autoScroll.isChecked()
qtbot.mouseClick(tabLayout.autoScroll, Qt.LeftButton)
assert tabLayout.autoScroll.isChecked()
# Editor Settings
qtbot.wait(keyDelay)
tabEditing = nwPrefs.tabEditing
nwPrefs._tabBox.setCurrentWidget(tabEditing)
qtbot.wait(keyDelay)
assert tabEditing.highlightQuotes.isChecked()
qtbot.mouseClick(tabEditing.highlightQuotes, Qt.LeftButton)
assert not tabEditing.highlightQuotes.isChecked()
qtbot.wait(keyDelay)
assert tabEditing.highlightEmph.isChecked()
qtbot.mouseClick(tabEditing.highlightEmph, Qt.LeftButton)
assert not tabEditing.highlightEmph.isChecked()
qtbot.wait(keyDelay)
assert not tabEditing.showTabsNSpaces.isChecked()
qtbot.mouseClick(tabEditing.showTabsNSpaces, Qt.LeftButton)
assert tabEditing.showTabsNSpaces.isChecked()
qtbot.wait(keyDelay)
assert not tabEditing.showLineEndings.isChecked()
qtbot.mouseClick(tabEditing.showLineEndings, Qt.LeftButton)
assert tabEditing.showLineEndings.isChecked()
qtbot.wait(keyDelay)
tabEditing.bigDocLimit.setValue(500)
# Auto-Replace Settings
qtbot.wait(keyDelay)
tabAutoRep = nwPrefs.tabAutoRep
nwPrefs._tabBox.setCurrentWidget(tabAutoRep)
qtbot.wait(keyDelay)
assert tabAutoRep.autoSelect.isChecked()
qtbot.mouseClick(tabAutoRep.autoSelect, Qt.LeftButton)
assert not tabAutoRep.autoSelect.isChecked()
qtbot.wait(keyDelay)
assert tabAutoRep.autoReplaceMain.isChecked()
qtbot.mouseClick(tabAutoRep.autoReplaceMain, Qt.LeftButton)
assert not tabAutoRep.autoReplaceMain.isChecked()
qtbot.wait(keyDelay)
assert not tabAutoRep.autoReplaceSQ.isEnabled()
assert not tabAutoRep.autoReplaceDQ.isEnabled()
assert not tabAutoRep.autoReplaceDash.isEnabled()
assert not tabAutoRep.autoReplaceDots.isEnabled()
monkeypatch.setattr(QuotesDialog, "selectedQuote", "'")
monkeypatch.setattr(QuotesDialog, "exec_", lambda *args: QDialog.Accepted)
qtbot.mouseClick(tabAutoRep.btnDoubleStyleC, Qt.LeftButton)
# Save and Check Config
qtbot.mouseClick(nwPrefs.buttonBox.button(QDialogButtonBox.Ok),
Qt.LeftButton)
nwPrefs._doClose()
assert theConf.confChanged
theConf.lastPath = ""
assert nwGUI.mainConf.saveConfig()
projFile = os.path.join(fncDir, "novelwriter.conf")
testFile = os.path.join(outDir, "guiPreferences_novelwriter.conf")
compFile = os.path.join(refDir, "guiPreferences_novelwriter.conf")
copyfile(projFile, testFile)
ignoreLines = [
2, # Timestamp
9, # Release Notes
12,
13,
14,
15,
16,
17,
18, # Window sizes
7,
28, # Fonts (depends on system default)
]
assert cmpFiles(testFile, compFile, ignoreLines)
# Clean up
nw.CONFIG = origConf
nwGUI.closeMain()
def testToolBuild_Main(qtbot, monkeypatch, nwGUI, nwLipsum, refDir, outDir):
"""Test the build tool.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QFileDialog, "getSaveFileName", lambda a, b, c, **kwargs: (c, None))
# Check that we cannot open when there is no project
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
assert getGuiItem("GuiBuildNovel") is None
# Open a project
assert nwGUI.openProject(nwLipsum)
# Open the tool
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiBuildNovel") is not None, timeout=1000)
nwBuild = getGuiItem("GuiBuildNovel")
assert isinstance(nwBuild, GuiBuildNovel)
nwBuild.textFont.setText("DejaVu Sans")
nwBuild.textSize.setValue(11)
# Test Save
# =========
# Invalid file format
assert not nwBuild._saveDocument(-1)
# Non-existent path
with monkeypatch.context() as mp:
mp.setattr("os.path.expanduser", lambda *args, **kwargs: nwLipsum)
assert nwGUI.mainConf.lastPath != nwLipsum
nwGUI.mainConf.lastPath = "no_such_path"
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
assert nwGUI.mainConf.lastPath == nwLipsum
# No path selected
with monkeypatch.context() as mp:
mp.setattr(QFileDialog, "getSaveFileName", lambda *args, **kwargs: ("", ""))
assert not nwBuild._saveDocument(nwBuild.FMT_NWD)
# Default Settings
nwGUI.mainConf.lastPath = nwLipsum
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_MD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.md")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.md")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.md")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_GH)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.md")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1G_Lorem_Ipsum.md")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1G_Lorem_Ipsum.md")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_FODT)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.fodt")
testFile = os.path.join(outDir, "guiBuild_Tool_Step1_Lorem_Ipsum.fodt")
compFile = os.path.join(refDir, "guiBuild_Tool_Step1_Lorem_Ipsum.fodt")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [4, 5])
# Change Title Formats and Flip Switches
nwBuild.fmtChapter.setText(r"Chapter %chw%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtScene.setText(r"Scene %ch%.%sc%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtSection.setText(r"%ch%.%sc%.1: %title%")
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.justifyText, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeSynopsis, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeComments, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeKeywords, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.replaceUCode, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.noteFiles, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.ignoreFlag, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_MD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.md")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.md")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.md")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_FODT)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.fodt")
testFile = os.path.join(outDir, "guiBuild_Tool_Step2_Lorem_Ipsum.fodt")
compFile = os.path.join(refDir, "guiBuild_Tool_Step2_Lorem_Ipsum.fodt")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [4, 5])
# Replace Tabs with Spaces
qtbot.mouseClick(nwBuild.replaceTabs, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
# Save files that can be compared
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_MD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.md")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.md")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.md")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_FODT)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.fodt")
testFile = os.path.join(outDir, "guiBuild_Tool_Step3_Lorem_Ipsum.fodt")
compFile = os.path.join(refDir, "guiBuild_Tool_Step3_Lorem_Ipsum.fodt")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [4, 5])
# Putline Mode
nwBuild.fmtChapter.setText(r"Chapter %chw%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtScene.setText(r"Scene %sca%: %title%")
qtbot.wait(stepDelay)
nwBuild.fmtSection.setText(r"Section: %title%")
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeComments, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.noteFiles, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.ignoreFlag, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.includeBody, Qt.LeftButton)
qtbot.wait(stepDelay)
qtbot.mouseClick(nwBuild.buildNovel, Qt.LeftButton)
# Save files that can be compared
assert nwBuild._saveDocument(nwBuild.FMT_NWD)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.nwd")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4_Lorem_Ipsum.nwd")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4_Lorem_Ipsum.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
assert nwBuild._saveDocument(nwBuild.FMT_HTM)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.htm")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4_Lorem_Ipsum.htm")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4_Lorem_Ipsum.htm")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Check the JSON files too at this stage
assert nwBuild._saveDocument(nwBuild.FMT_JSON_H)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.json")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4H_Lorem_Ipsum.json")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4H_Lorem_Ipsum.json")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [8])
assert nwBuild._saveDocument(nwBuild.FMT_JSON_M)
projFile = os.path.join(nwLipsum, "Lorem Ipsum.json")
testFile = os.path.join(outDir, "guiBuild_Tool_Step4M_Lorem_Ipsum.json")
compFile = os.path.join(refDir, "guiBuild_Tool_Step4M_Lorem_Ipsum.json")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [8])
# Since odt and fodt is built by the same code, we don't check the
# output. but just that the different format can be written as well
assert nwBuild._saveDocument(nwBuild.FMT_ODT)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.odt"))
# Print to PDF
if not nwGUI.mainConf.osDarwin:
assert nwBuild._saveDocument(nwBuild.FMT_PDF)
assert os.path.isfile(os.path.join(nwLipsum, "Lorem Ipsum.pdf"))
# Close the build tool
htmlText = nwBuild.htmlText
htmlStyle = nwBuild.htmlStyle
buildTime = nwBuild.buildTime
nwBuild._doClose()
# Re-open build dialog from cahce
nwGUI.mainMenu.aBuildProject.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiBuildNovel") is not None, timeout=1000)
nwBuild = getGuiItem("GuiBuildNovel")
assert isinstance(nwBuild, GuiBuildNovel)
assert nwBuild.viewCachedDoc()
assert nwBuild.htmlText == htmlText
assert nwBuild.htmlStyle == htmlStyle
assert nwBuild.buildTime == buildTime
nwBuild._doClose()
def testGuiMergeSplit_Tools(qtbot, monkeypatch, nwGUI, nwLipsum, refDir,
outDir):
"""Test the full merge and split tools.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
nwGUI.theProject.projTree.setSeed(42)
assert nwGUI.openProject(nwLipsum)
qtbot.wait(stepDelay)
assert nwGUI.treeView.setSelectedHandle("45e6b01ca35c1")
qtbot.wait(stepDelay)
monkeypatch.setattr(GuiDocMerge, "exec_", lambda *args: None)
nwGUI.mainMenu.aMergeDocs.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiDocMerge") is not None,
timeout=1000)
nwMerge = getGuiItem("GuiDocMerge")
assert isinstance(nwMerge, GuiDocMerge)
nwMerge.show()
qtbot.wait(stepDelay)
nwMerge._doMerge()
qtbot.wait(stepDelay)
assert nwGUI.theProject.projTree["73475cb40a568"] is not None
projFile = os.path.join(nwLipsum, "content", "73475cb40a568.nwd")
testFile = os.path.join(outDir, "guiMerge_73475cb40a568.nwd")
compFile = os.path.join(refDir, "guiMerge_73475cb40a568.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Split By Chapter
assert nwGUI.treeView.setSelectedHandle("73475cb40a568")
qtbot.wait(stepDelay)
monkeypatch.setattr(GuiDocSplit, "exec_", lambda *args: None)
nwGUI.mainMenu.aSplitDoc.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiDocSplit") is not None,
timeout=1000)
nwSplit = getGuiItem("GuiDocSplit")
assert isinstance(nwSplit, GuiDocSplit)
nwSplit.show()
qtbot.wait(stepDelay)
nwSplit.splitLevel.setCurrentIndex(1)
qtbot.wait(stepDelay)
nwSplit._doSplit()
assert nwGUI.theProject.projTree["71ee45a3c0db9"] is not None
# This should give us back the file as it was before
projFile = os.path.join(nwLipsum, "content", "71ee45a3c0db9.nwd")
testFile = os.path.join(outDir, "guiMerge_71ee45a3c0db9.nwd")
compFile = os.path.join(refDir, "guiMerge_73475cb40a568.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [1, 2, 3])
# Split By Scene
assert nwGUI.treeView.setSelectedHandle("73475cb40a568")
qtbot.wait(stepDelay)
nwGUI.mainMenu.aSplitDoc.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiDocSplit") is not None,
timeout=1000)
nwSplit = getGuiItem("GuiDocSplit")
assert isinstance(nwSplit, GuiDocSplit)
qtbot.wait(stepDelay)
nwSplit.splitLevel.setCurrentIndex(2)
qtbot.wait(stepDelay)
nwSplit._doSplit()
assert nwGUI.theProject.projTree["25fc0e7096fc6"] is not None
assert nwGUI.theProject.projTree["31489056e0916"] is not None
assert nwGUI.theProject.projTree["98010bd9270f9"] is not None
projFile = os.path.join(nwLipsum, "content", "25fc0e7096fc6.nwd")
testFile = os.path.join(outDir, "guiSplit_25fc0e7096fc6.nwd")
compFile = os.path.join(refDir, "guiSplit_25fc0e7096fc6.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "content", "31489056e0916.nwd")
testFile = os.path.join(outDir, "guiSplit_31489056e0916.nwd")
compFile = os.path.join(refDir, "guiSplit_31489056e0916.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "content", "98010bd9270f9.nwd")
testFile = os.path.join(outDir, "guiSplit_98010bd9270f9.nwd")
compFile = os.path.join(refDir, "guiSplit_98010bd9270f9.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Split By Section
assert nwGUI.treeView.setSelectedHandle("73475cb40a568")
qtbot.wait(stepDelay)
nwGUI.mainMenu.aSplitDoc.activate(QAction.Trigger)
qtbot.waitUntil(lambda: getGuiItem("GuiDocSplit") is not None,
timeout=1000)
nwSplit = getGuiItem("GuiDocSplit")
assert isinstance(nwSplit, GuiDocSplit)
qtbot.wait(stepDelay)
nwSplit.splitLevel.setCurrentIndex(3)
qtbot.wait(stepDelay)
nwSplit._doSplit()
assert nwGUI.theProject.projTree["1a6562590ef19"] is not None
assert nwGUI.theProject.projTree["031b4af5197ec"] is not None
assert nwGUI.theProject.projTree["41cfc0d1f2d12"] is not None
assert nwGUI.theProject.projTree["2858dcd1057d3"] is not None
assert nwGUI.theProject.projTree["2fca346db6561"] is not None
projFile = os.path.join(nwLipsum, "content", "1a6562590ef19.nwd")
testFile = os.path.join(outDir, "guiSplit_1a6562590ef19.nwd")
compFile = os.path.join(refDir, "guiSplit_25fc0e7096fc6.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [1, 2, 3])
projFile = os.path.join(nwLipsum, "content", "031b4af5197ec.nwd")
testFile = os.path.join(outDir, "guiSplit_031b4af5197ec.nwd")
compFile = os.path.join(refDir, "guiSplit_031b4af5197ec.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "content", "41cfc0d1f2d12.nwd")
testFile = os.path.join(outDir, "guiSplit_41cfc0d1f2d12.nwd")
compFile = os.path.join(refDir, "guiSplit_41cfc0d1f2d12.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "content", "2858dcd1057d3.nwd")
testFile = os.path.join(outDir, "guiSplit_2858dcd1057d3.nwd")
compFile = os.path.join(refDir, "guiSplit_2858dcd1057d3.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(nwLipsum, "content", "2fca346db6561.nwd")
testFile = os.path.join(outDir, "guiSplit_2fca346db6561.nwd")
compFile = os.path.join(refDir, "guiSplit_2fca346db6561.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
def testGuiEditor_Main(qtbot, monkeypatch, nwGUI, fncDir, fncProj, refDir,
outDir):
"""Test the document editor.
"""
# Block message box
monkeypatch.setattr(QMessageBox, "question", lambda *args: QMessageBox.Yes)
monkeypatch.setattr(QMessageBox, "information",
lambda *args: QMessageBox.Yes)
monkeypatch.setattr(GuiItemEditor, "exec_", lambda *args: None)
monkeypatch.setattr(GuiItemEditor, "result",
lambda *args: QDialog.Accepted)
monkeypatch.setattr(GuiProjectTree, "hasFocus", lambda *args: True)
monkeypatch.setattr(GuiDocEditor, "hasFocus", lambda *args: True)
# Create new, save, close project
nwGUI.theProject.projTree.setSeed(42)
assert nwGUI.newProject({"projPath": fncProj})
assert nwGUI.saveProject()
assert nwGUI.closeProject()
assert len(nwGUI.theProject.projTree) == 0
assert len(nwGUI.theProject.projTree._treeOrder) == 0
assert len(nwGUI.theProject.projTree._treeRoots) == 0
assert nwGUI.theProject.projTree.trashRoot() is None
assert nwGUI.theProject.projPath is None
assert nwGUI.theProject.projMeta is None
assert nwGUI.theProject.projFile == "nwProject.nwx"
assert nwGUI.theProject.projName == ""
assert nwGUI.theProject.bookTitle == ""
assert len(nwGUI.theProject.bookAuthors) == 0
assert not nwGUI.theProject.spellCheck
# Check the files
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiEditor_Main_Initial_nwProject.nwx")
compFile = os.path.join(refDir, "guiEditor_Main_Initial_nwProject.nwx")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
qtbot.wait(stepDelay)
# qtbot.stopForInteraction()
# Re-open project
assert nwGUI.openProject(fncProj)
qtbot.wait(stepDelay)
# Check that we loaded the data
assert len(nwGUI.theProject.projTree) == 8
assert len(nwGUI.theProject.projTree._treeOrder) == 8
assert len(nwGUI.theProject.projTree._treeRoots) == 4
assert nwGUI.theProject.projTree.trashRoot() is None
assert nwGUI.theProject.projPath == fncProj
assert nwGUI.theProject.projMeta == os.path.join(fncProj, "meta")
assert nwGUI.theProject.projFile == "nwProject.nwx"
assert nwGUI.theProject.projName == "New Project"
assert nwGUI.theProject.bookTitle == ""
assert len(nwGUI.theProject.bookAuthors) == 0
assert not nwGUI.theProject.spellCheck
# Check that tree items have been created
assert nwGUI.treeView._getTreeItem("73475cb40a568") is not None
assert nwGUI.treeView._getTreeItem("25fc0e7096fc6") is not None
assert nwGUI.treeView._getTreeItem("31489056e0916") is not None
assert nwGUI.treeView._getTreeItem("98010bd9270f9") is not None
assert nwGUI.treeView._getTreeItem("0e17daca5f3e1") is not None
assert nwGUI.treeView._getTreeItem("44cb730c42048") is not None
assert nwGUI.treeView._getTreeItem("71ee45a3c0db9") is not None
assert nwGUI.treeView._getTreeItem("811786ad1ae74") is not None
nwGUI.mainMenu.aSpellCheck.setChecked(True)
assert nwGUI.mainMenu._toggleSpellCheck()
# Change some settings
nwGUI.mainConf.hideHScroll = True
nwGUI.mainConf.hideVScroll = True
nwGUI.mainConf.scrollPastEnd = True
nwGUI.mainConf.autoScrollPos = 80
nwGUI.mainConf.autoScroll = True
# Add a Character File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.treeView.clearSelection()
nwGUI.treeView._getTreeItem("71ee45a3c0db9").setSelected(True)
nwGUI.treeView.newTreeItem(nwItemType.FILE, None)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Jane Doe":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file about Jane.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Add a Plot File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.treeView.clearSelection()
nwGUI.treeView._getTreeItem("44cb730c42048").setSelected(True)
nwGUI.treeView.newTreeItem(nwItemType.FILE, None)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Main Plot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file detailing the main plot.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Add a World File
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.treeView.clearSelection()
nwGUI.treeView._getTreeItem("811786ad1ae74").setSelected(True)
nwGUI.treeView.newTreeItem(nwItemType.FILE, None)
assert nwGUI.openSelectedItem()
# Add Some Text
nwGUI.docEditor.replaceText("Hello World!")
assert nwGUI.docEditor.getText() == "Hello World!"
nwGUI.docEditor.replaceText("")
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Main Location":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@tag: Home":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a file describing Jane's home.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
# Trigger autosaves before making more changes
nwGUI._autoSaveDocument()
nwGUI._autoSaveProject()
# Select the 'New Scene' file
nwGUI.switchFocus(nwWidget.TREE)
nwGUI.treeView.clearSelection()
nwGUI.treeView._getTreeItem("73475cb40a568").setExpanded(True)
nwGUI.treeView._getTreeItem("31489056e0916").setExpanded(True)
nwGUI.treeView._getTreeItem("0e17daca5f3e1").setSelected(True)
assert nwGUI.openSelectedItem()
# Type something into the document
nwGUI.switchFocus(nwWidget.EDITOR)
qtbot.keyClick(nwGUI.docEditor,
"a",
modifier=Qt.ControlModifier,
delay=keyDelay)
for c in "# Novel":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "## Chapter":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@pov: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@plot: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "### Scene":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "% How about a comment?":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@pov: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@plot: MainPlot":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@location: Home":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "#### Some Section":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "@char: Jane":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "This is a paragraph of dummy text.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in ("This is another paragraph of much longer dummy text. "
"It is in fact 1 very very DUMB dummy text! "):
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "We can also try replacing \"quotes\", even single 'quotes' are replaced. ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "Isn't that nice? ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "We can hyphen-ate, make dashes -- and even longer dashes --- if we want. ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "Ellipsis? Not a problem either ... ":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
for c in "How about three hyphens - -":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Left, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Backspace, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Right, delay=keyDelay)
for c in "- for long dash? It works too.":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "\"Full line double quoted text.\"":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
for c in "'Full line single quoted text.'":
qtbot.keyClick(nwGUI.docEditor, c, delay=typeDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.keyClick(nwGUI.docEditor, Qt.Key_Return, delay=keyDelay)
qtbot.wait(stepDelay)
nwGUI.docEditor.wCounter.run()
qtbot.wait(stepDelay)
# Save the document
assert nwGUI.docEditor.docChanged
assert nwGUI.saveDocument()
assert not nwGUI.docEditor.docChanged
qtbot.wait(stepDelay)
nwGUI.rebuildIndex()
qtbot.wait(stepDelay)
# Open and view the edited document
nwGUI.switchFocus(nwWidget.VIEWER)
assert nwGUI.openDocument("0e17daca5f3e1")
assert nwGUI.viewDocument("0e17daca5f3e1")
qtbot.wait(stepDelay)
assert nwGUI.saveProject()
assert nwGUI.closeDocViewer()
qtbot.wait(stepDelay)
# Check a Quick Create and Delete
assert nwGUI.treeView.newTreeItem(nwItemType.FILE, None)
newHandle = nwGUI.treeView.getSelectedHandle()
assert nwGUI.theProject.projTree["2858dcd1057d3"] is not None
assert nwGUI.treeView.deleteItem()
assert nwGUI.treeView.setSelectedHandle(newHandle)
assert nwGUI.treeView.deleteItem()
assert nwGUI.theProject.projTree["2fca346db6561"] is not None # Trash
assert nwGUI.saveProject()
# Check the files
projFile = os.path.join(fncProj, "nwProject.nwx")
testFile = os.path.join(outDir, "guiEditor_Main_Final_nwProject.nwx")
compFile = os.path.join(refDir, "guiEditor_Main_Final_nwProject.nwx")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile, [2, 6, 7, 8])
projFile = os.path.join(fncProj, "content", "031b4af5197ec.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_031b4af5197ec.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_031b4af5197ec.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "1a6562590ef19.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_1a6562590ef19.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_1a6562590ef19.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "0e17daca5f3e1.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_0e17daca5f3e1.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_0e17daca5f3e1.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
projFile = os.path.join(fncProj, "content", "41cfc0d1f2d12.nwd")
testFile = os.path.join(outDir, "guiEditor_Main_Final_41cfc0d1f2d12.nwd")
compFile = os.path.join(refDir, "guiEditor_Main_Final_41cfc0d1f2d12.nwd")
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
def testBaseConfig_Init(monkeypatch, tmpDir, fncDir, outDir, refDir, filesDir):
"""Test config intialisation.
"""
tstConf = Config()
confFile = os.path.join(tmpDir, "novelwriter.conf")
testFile = os.path.join(outDir, "baseConfig_novelwriter.conf")
compFile = os.path.join(refDir, "baseConfig_novelwriter.conf")
# Make sure we don't have any old conf file
if os.path.isfile(confFile):
os.unlink(confFile)
# Let the config class figure out the path
with monkeypatch.context() as mp:
mp.setattr("PyQt5.QtCore.QStandardPaths.writableLocation", lambda *args: fncDir)
tstConf.verQtValue = 50600
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
tstConf.verQtValue = 50000
tstConf.initConfig()
assert tstConf.confPath == os.path.join(fncDir, tstConf.appHandle)
assert tstConf.dataPath == os.path.join(fncDir, tstConf.appHandle)
assert not os.path.isfile(confFile)
# Fail to make folders
with monkeypatch.context() as mp:
mp.setattr("os.mkdir", causeOSError)
tstConfDir = os.path.join(fncDir, "test_conf")
tstConf.initConfig(confPath=tstConfDir, dataPath=tmpDir)
assert tstConf.confPath is None
assert tstConf.dataPath == tmpDir
assert not os.path.isfile(confFile)
tstDataDir = os.path.join(fncDir, "test_data")
tstConf.initConfig(confPath=tmpDir, dataPath=tstDataDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath is None
assert os.path.isfile(confFile)
os.unlink(confFile)
# Test load/save with no path
tstConf.confPath = None
assert not tstConf.loadConfig()
assert not tstConf.saveConfig()
# Run again and set the paths directly and correctly
# This should create a config file as well
with monkeypatch.context() as mp:
mp.setattr("os.path.expanduser", lambda *args: "")
tstConf.spellTool = nwConst.SP_INTERNAL
tstConf.initConfig(confPath=tmpDir, dataPath=tmpDir)
assert tstConf.confPath == tmpDir
assert tstConf.dataPath == tmpDir
assert os.path.isfile(confFile)
copyfile(confFile, testFile)
assert cmpFiles(testFile, compFile, [2, 9, 10])
# Load and save with OSError
with monkeypatch.context() as mp:
mp.setattr("builtins.open", causeOSError)
assert not tstConf.loadConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
assert not tstConf.saveConfig()
assert tstConf.hasError is True
assert tstConf.errData != []
assert tstConf.getErrData().startswith("Could not")
assert tstConf.hasError is False
assert tstConf.errData == []
assert tstConf.loadConfig()
assert tstConf.saveConfig()
# Test Correcting Quote Settings
origDbl = tstConf.fmtDoubleQuotes
origSng = tstConf.fmtSingleQuotes
orDoDbl = tstConf.doReplaceDQuote
orDoSng = tstConf.doReplaceSQuote
tstConf.fmtDoubleQuotes = ["\"", "\""]
tstConf.fmtSingleQuotes = ["'", "'"]
tstConf.doReplaceDQuote = True
tstConf.doReplaceSQuote = True
assert tstConf.saveConfig()
assert tstConf.loadConfig()
assert not tstConf.doReplaceDQuote
assert not tstConf.doReplaceSQuote
tstConf.fmtDoubleQuotes = origDbl
tstConf.fmtSingleQuotes = origSng
tstConf.doReplaceDQuote = orDoDbl
tstConf.doReplaceSQuote = orDoSng
assert tstConf.saveConfig()
# Localisation
i18nDir = os.path.join(fncDir, "i18n")
os.mkdir(i18nDir)
os.mkdir(os.path.join(i18nDir, "stuff"))
tstConf.nwLangPath = i18nDir
copyfile(os.path.join(filesDir, "nw_en_GB.qm"), os.path.join(fncDir, "nw_en_GB.qm"))
writeFile(os.path.join(i18nDir, "nw_en_GB.ts"), "")
writeFile(os.path.join(i18nDir, "nw_abcd.qm"), "")
tstApp = DummyApp()
tstConf.initLocalisation(tstApp)
theList = tstConf.listLanguages(tstConf.LANG_NW)
assert theList == [("en_GB", "British English")]
copyfile(confFile, testFile)
assert cmpFiles(testFile, compFile, [2, 9, 10])
def testCoreIndex_LoadSave(monkeypatch, nwLipsum, mockGUI, outDir, refDir):
"""Test core functionality of scaning, saving, loading and checking
the index cache file.
"""
projFile = os.path.join(nwLipsum, "meta", "tagsIndex.json")
testFile = os.path.join(outDir, "coreIndex_LoadSave_tagsIndex.json")
compFile = os.path.join(refDir, "coreIndex_LoadSave_tagsIndex.json")
theProject = NWProject(mockGUI)
assert theProject.openProject(nwLipsum)
theIndex = NWIndex(theProject)
assert repr(theIndex) == "<NWIndex project='Lorem Ipsum'>"
notIndexable = {
"b3643d0f92e32": False, # Novel ROOT
"45e6b01ca35c1": False, # Chapter One FOLDER
"6bd935d2490cd": False, # Chapter Two FOLDER
"67a8707f2f249": False, # Character ROOT
"6c6afb1247750": False, # Plot ROOT
"60bdf227455cc": False, # World ROOT
}
for tItem in theProject.tree:
assert theIndex.reIndexHandle(tItem.itemHandle) is notIndexable.get(
tItem.itemHandle, True)
assert theIndex.reIndexHandle(None) is False
# Make the save fail
with monkeypatch.context() as mp:
mp.setattr("builtins.open", causeException)
assert theIndex.saveIndex() is False
# Make the save pass
assert theIndex.saveIndex() is True
# Take a copy of the index
tagIndex = str(theIndex._tagsIndex.packData())
itemsIndex = str(theIndex._itemIndex.packData())
# Delete a handle
assert theIndex._tagsIndex["Bod"] is not None
assert theIndex._itemIndex["4c4f28287af27"] is not None
theIndex.deleteHandle("4c4f28287af27")
assert theIndex._tagsIndex["Bod"] is None
assert theIndex._itemIndex["4c4f28287af27"] is None
# Clear the index
theIndex.clearIndex()
assert theIndex._tagsIndex._tags == {}
assert theIndex._itemIndex._items == {}
# Make the load fail
with monkeypatch.context() as mp:
mp.setattr(json, "load", causeException)
assert theIndex.loadIndex() is False
assert theIndex.indexBroken is True
# Make the load pass
assert theIndex.loadIndex() is True
assert theIndex.indexBroken is False
assert str(theIndex._tagsIndex.packData()) == tagIndex
assert str(theIndex._itemIndex.packData()) == itemsIndex
# Check File
copyfile(projFile, testFile)
assert cmpFiles(testFile, compFile)
# Write an emtpy index file and load it
writeFile(projFile, "{}")
assert theIndex.loadIndex() is False
assert theIndex.indexBroken is True
# Write an index file that passes loading, but is still empty
writeFile(projFile, '{"tagsIndex": {}, "itemIndex": {}}')
assert theIndex.loadIndex() is True
assert theIndex.indexBroken is False
# Check that the index is re-populated
assert "04468803b92e1" in theIndex._itemIndex
assert "2426c6f0ca922" in theIndex._itemIndex
assert "441420a886d82" in theIndex._itemIndex
assert "47666c91c7ccf" in theIndex._itemIndex
assert "4c4f28287af27" in theIndex._itemIndex
assert "846352075de7d" in theIndex._itemIndex
assert "88243afbe5ed8" in theIndex._itemIndex
assert "88d59a277361b" in theIndex._itemIndex
assert "8c58a65414c23" in theIndex._itemIndex
assert "db7e733775d4d" in theIndex._itemIndex
assert "eb103bc70c90c" in theIndex._itemIndex
assert "f8c0562e50f1b" in theIndex._itemIndex
assert "f96ec11c6a3da" in theIndex._itemIndex
assert "fb609cd8319dc" in theIndex._itemIndex
assert "7a992350f3eb6" in theIndex._itemIndex
# Finalise
assert theProject.closeProject() is True
