示例#1
0
def boot() -> None:
    ns = [[CURVE, HARDENED | 44, HARDENED | 134]]
    wire.add(MessageType.LiskGetPublicKey, __name__, "get_public_key", ns)
    wire.add(MessageType.LiskGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.LiskSignTx, __name__, "sign_tx", ns)
    wire.add(MessageType.LiskSignMessage, __name__, "sign_message", ns)
    wire.add(MessageType.LiskVerifyMessage, __name__, "verify_message")
示例#2
0
def boot():
    ns = [
        ["ed25519-keccak", HARDENED | 44, HARDENED | 43],
        ["ed25519-keccak", HARDENED | 44, HARDENED | 1],
    ]
    wire.add(MessageType.NEMGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.NEMSignTx, __name__, "sign_tx", ns)
示例#3
0
def boot():
    wire.add(MessageType.MoneroGetAddress, __name__, "get_address")
    wire.add(MessageType.MoneroGetWatchKey, __name__, "get_watch_only")
    wire.add(MessageType.MoneroTransactionInitRequest, __name__, "sign_tx")
    wire.add(MessageType.MoneroKeyImageExportInitRequest, __name__,
             "key_image_sync")

    if __debug__ and hasattr(MessageType, "DebugMoneroDiagRequest"):
        wire.add(MessageType.DebugMoneroDiagRequest, __name__, "diag")
示例#4
0
def boot() -> None:
    ns = []
    for i in all_slip44_ids_hardened():
        ns.append([CURVE, HARDENED | 44, i])
    wire.add(MessageType.EthereumGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.EthereumGetPublicKey, __name__, "get_public_key", ns)
    wire.add(MessageType.EthereumSignTx, __name__, "sign_tx", ns)
    wire.add(MessageType.EthereumSignMessage, __name__, "sign_message", ns)
    wire.add(MessageType.EthereumVerifyMessage, __name__, "verify_message")
示例#5
0
    def boot() -> None:
        # wipe storage when debug build is used on real hardware
        if not utils.EMULATOR:
            config.wipe()

        wire.register(MessageType.DebugLinkDecision,
                      dispatch_DebugLinkDecision)
        wire.register(MessageType.DebugLinkGetState,
                      dispatch_DebugLinkGetState)

        wire.add(MessageType.LoadDevice, __name__, "load_device")
示例#6
0
    def boot() -> None:
        # wipe storage when debug build is used on real hardware
        if not utils.EMULATOR:
            config.wipe()

        wire.add(MessageType.LoadDevice, __name__, "load_device")
        wire.add(MessageType.DebugLinkShowText, __name__, "show_text")
        wire.register(MessageType.DebugLinkDecision, dispatch_DebugLinkDecision)  # type: ignore
        wire.register(MessageType.DebugLinkGetState, dispatch_DebugLinkGetState)
        wire.register(MessageType.DebugLinkReseedRandom, dispatch_DebugLinkReseedRandom)
        wire.register(MessageType.DebugLinkRecordScreen, dispatch_DebugLinkRecordScreen)
        wire.register(MessageType.DebugLinkEraseSdCard, dispatch_DebugLinkEraseSdCard)
        wire.register(MessageType.DebugLinkWatchLayout, dispatch_DebugLinkWatchLayout)
示例#7
0
def boot():
    ns = [
        ["secp256k1", HARDENED | 44, HARDENED | 128],
        ["ed25519", HARDENED | 44, HARDENED | 128],
    ]
    wire.add(MessageType.MoneroGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.MoneroGetWatchKey, __name__, "get_watch_only", ns)
    wire.add(MessageType.MoneroTransactionInitRequest, __name__, "sign_tx", ns)
    wire.add(
        MessageType.MoneroKeyImageExportInitRequest, __name__, "key_image_sync", ns
    )

    if __debug__ and hasattr(MessageType, "DebugMoneroDiagRequest"):
        wire.add(MessageType.DebugMoneroDiagRequest, __name__, "diag")
示例#8
0
def boot(iface: io.HID) -> None:
    wire.add(
        MessageType.WebAuthnListResidentCredentials,
        __name__,
        "list_resident_credentials",
    )
    wire.add(MessageType.WebAuthnAddResidentCredential, __name__,
             "add_resident_credential")
    wire.add(
        MessageType.WebAuthnRemoveResidentCredential,
        __name__,
        "remove_resident_credential",
    )
    loop.schedule(handle_reports(iface))
示例#9
0
def boot() -> None:
    wire.add(
        MessageType.WebAuthnListResidentCredentials,
        __name__,
        "list_resident_credentials",
    )
    wire.add(MessageType.WebAuthnAddResidentCredential, __name__,
             "add_resident_credential")
    wire.add(
        MessageType.WebAuthnRemoveResidentCredential,
        __name__,
        "remove_resident_credential",
    )
    import usb

    loop.schedule(handle_reports(usb.iface_webauthn))
示例#10
0
def boot():
    wire.add(MessageType.CardanoGetAddress, __name__, "get_address")
    wire.add(MessageType.CardanoGetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.CardanoSignTx, __name__, "sign_tx")
示例#11
0
def boot() -> None:
    wire.add(MessageType.SolanaGetAddress, __name__, "get_address")
    wire.add(MessageType.SolanaSignTxHash, __name__, "sign_tx_hash")
示例#12
0
def boot() -> None:
    wire.add(MessageType.GetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.GetAddress, __name__, "get_address")
    wire.add(MessageType.GetEntropy, __name__, "get_entropy")
    wire.add(MessageType.SignTx, __name__, "sign_tx")
    wire.add(MessageType.SignMessage, __name__, "sign_message")
    wire.add(MessageType.VerifyMessage, __name__, "verify_message")
    wire.add(MessageType.SignIdentity, __name__, "sign_identity")
    wire.add(MessageType.GetECDHSessionKey, __name__, "get_ecdh_session_key")
    wire.add(MessageType.CipherKeyValue, __name__, "cipher_key_value")
示例#13
0
def boot() -> None:
    wire.add(MessageType.StellarGetAddress, __name__, "get_address")
    wire.add(MessageType.StellarSignTx, __name__, "sign_tx")
示例#14
0
def boot():
    ns = [[CURVE, HARDENED | 44, HARDENED | 43], [CURVE, HARDENED | 44, HARDENED | 1]]
    wire.add(MessageType.NEMGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.NEMSignTx, __name__, "sign_tx", ns)
示例#15
0
def boot():
    ns = [[CURVE, HARDENED | 44, HARDENED | 148]]
    wire.add(MessageType.StellarGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.StellarSignTx, __name__, "sign_tx", ns)
示例#16
0
def boot():
    ns = [[CURVE, HARDENED | 44, HARDENED | 1729]]
    wire.add(MessageType.TezosGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.TezosSignTx, __name__, "sign_tx", ns)
    wire.add(MessageType.TezosGetPublicKey, __name__, "get_public_key", ns)
示例#17
0
def boot():
    ns = [["secp256k1", HARDENED | 44, HARDENED | 60]]
    wire.add(MessageType.EthereumGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.EthereumSignTx, __name__, "sign_tx", ns)
    wire.add(MessageType.EthereumSignMessage, __name__, "sign_message", ns)
    wire.add(MessageType.EthereumVerifyMessage, __name__, "verify_message")
示例#18
0
def boot() -> None:
    ns = [[CURVE, HARDENED | 44, HARDENED | 144]]
    wire.add(MessageType.RippleGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.RippleSignTx, __name__, "sign_tx", ns)
示例#19
0
def boot() -> None:
    wire.add(MessageType.ResetDevice, __name__, "reset_device")
    wire.add(MessageType.BackupDevice, __name__, "backup_device")
    wire.add(MessageType.WipeDevice, __name__, "wipe_device")
    wire.add(MessageType.RecoveryDevice, __name__, "recovery_device")
    wire.add(MessageType.ApplySettings, __name__, "apply_settings")
    wire.add(MessageType.ApplyFlags, __name__, "apply_flags")
    wire.add(MessageType.ChangePin, __name__, "change_pin")
    wire.add(MessageType.SetU2FCounter, __name__, "set_u2f_counter")
    wire.add(MessageType.GetNextU2FCounter, __name__, "get_next_u2f_counter")
    wire.add(MessageType.SdProtect, __name__, "sd_protect")
示例#20
0
def boot() -> None:
    wire.add(MessageType.AuthorizeCoinJoin, __name__, "authorize_coinjoin")
    wire.add(MessageType.GetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.GetAddress, __name__, "get_address")
    wire.add(MessageType.GetOwnershipId, __name__, "get_ownership_id")
    wire.add(MessageType.GetOwnershipProof, __name__, "get_ownership_proof")
    wire.add(MessageType.SignTx, __name__, "sign_tx")
    wire.add(MessageType.SignMessage, __name__, "sign_message")
    wire.add(MessageType.VerifyMessage, __name__, "verify_message")
示例#21
0
def boot() -> None:
    wire.add(MessageType.EthereumGetAddress, __name__, "get_address")
    wire.add(MessageType.EthereumGetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.EthereumSignTx, __name__, "sign_tx")
    wire.add(MessageType.EthereumSignMessage, __name__, "sign_message")
    wire.add(MessageType.EthereumVerifyMessage, __name__, "verify_message")
示例#22
0
def boot():
    ns = [[CURVE, HARDENED | 44, HARDENED | 194]]

    wire.add(MessageType.EosGetPublicKey, __name__, "get_public_key", ns)
    wire.add(MessageType.EosSignTx, __name__, "sign_tx", ns)
示例#23
0
def boot():
    wire.add(MessageType.LiskGetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.LiskGetAddress, __name__, "get_address")
    wire.add(MessageType.LiskSignMessage, __name__, "sign_message")
    wire.add(MessageType.LiskVerifyMessage, __name__, "verify_message")
    wire.add(MessageType.LiskSignTx, __name__, "sign_tx")
示例#24
0
def boot() -> None:
    wire.add(MessageType.GetEntropy, __name__, "get_entropy")
    wire.add(MessageType.SignIdentity, __name__, "sign_identity")
    wire.add(MessageType.GetECDHSessionKey, __name__, "get_ecdh_session_key")
    wire.add(MessageType.CipherKeyValue, __name__, "cipher_key_value")
示例#25
0
def boot() -> None:
    wire.add(MessageType.EosGetPublicKey, __name__, "get_public_key")
    wire.add(MessageType.EosSignTx, __name__, "sign_tx")
示例#26
0
def boot():
    wire.add(MessageType.EthereumGetAddress, __name__, "get_address")
    wire.add(MessageType.EthereumSignTx, __name__, "sign_tx")
    wire.add(MessageType.EthereumSignMessage, __name__, "sign_message")
    wire.add(MessageType.EthereumVerifyMessage, __name__, "verify_message")
示例#27
0
def boot():
    ns = [[CURVE, HARDENED | 44, HARDENED | 128]]
    wire.add(MessageType.MoneroGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.MoneroGetWatchKey, __name__, "get_watch_only", ns)
    wire.add(MessageType.MoneroTransactionInitRequest, __name__, "sign_tx", ns)
    wire.add(MessageType.MoneroKeyImageExportInitRequest, __name__,
             "key_image_sync", ns)
    wire.add(MessageType.MoneroGetTxKeyRequest, __name__, "get_tx_keys", ns)
    wire.add(MessageType.MoneroLiveRefreshStartRequest, __name__,
             "live_refresh", ns)

    if __debug__ and hasattr(MessageType, "DebugMoneroDiagRequest"):
        wire.add(MessageType.DebugMoneroDiagRequest, __name__, "diag")
示例#28
0
def boot():
    ns = [["secp256k1", HARDENED | 44, HARDENED | 144]]
    wire.add(MessageType.RippleGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.RippleSignTx, __name__, "sign_tx", ns)
示例#29
0
def boot() -> None:
    # only enable LoadDevice in debug builds
    if __debug__:
        wire.add(MessageType.LoadDevice, __name__, "load_device")
    wire.add(MessageType.ResetDevice, __name__, "reset_device")
    wire.add(MessageType.BackupDevice, __name__, "backup_device")
    wire.add(MessageType.WipeDevice, __name__, "wipe_device")
    wire.add(MessageType.RecoveryDevice, __name__, "recovery_device")
    wire.add(MessageType.ApplySettings, __name__, "apply_settings")
    wire.add(MessageType.ApplyFlags, __name__, "apply_flags")
    wire.add(MessageType.ChangePin, __name__, "change_pin")
    wire.add(MessageType.SetU2FCounter, __name__, "set_u2f_counter")
    wire.add(MessageType.SdProtect, __name__, "sd_protect")
示例#30
0
def boot() -> None:
    ns = [[CURVE, HARDENED | 44, HARDENED | 360],
          [CURVE, HARDENED | 44, HARDENED | 1]]
    wire.add(MessageType.VsysGetAddress, __name__, "get_address", ns)
    wire.add(MessageType.VsysSignTx, __name__, "sign_tx", ns)
    wire.add(MessageType.VsysGetPublicKey, __name__, "get_public_key", ns)