def __init__(self, parent, edit_these, new_item, title, **kwargs):
QtGui.QMainWindow.__init__(self, parent)
self.helper = HelpHandler(self)
option_section = parent.project.find_section('OPTIONS')
if option_section.infiltration=="HORTON" or option_section.infiltration=="MODIFIED_HORTON":
self.help_topic = "swmm/src/src/hortoninfiltrationparameters.htm"
elif option_section.infiltration=="GREEN_AMPT" or option_section.infiltration=="MODIFIED_GREEN_AMPT":
self.help_topic = "swmm/src/src/green_amptinfiltrationparame.htm"
elif option_section.infiltration=="CURVE_NUMBER":
self.help_topic = "swmm/src/src/curvenumberinfiltrationpara.htm"
self.setupUi(self)
self.setWindowTitle(title)
QtCore.QObject.connect(self.cmdOK, QtCore.SIGNAL("clicked()"), self.cmdOK_Clicked)
QtCore.QObject.connect(self.cmdCancel, QtCore.SIGNAL("clicked()"), self.cmdCancel_Clicked)
QtCore.QObject.connect(self.cboInfilModel, QtCore.SIGNAL("currentIndexChanged(int)"),
self.cboInfilModel_currentIndexChanged)
self.defaults = None
if kwargs.has_key("defaults"):
self.defaults = kwargs["defaults"]
enum_val = E_InfilModel.HORTON
if self.defaults is not None:
enum_val = E_InfilModel[self.defaults.properties_sub_values[self.defaults.infil_model_key]]
# self.infil_model = self.qsettings.value(self.default_key, None)
# if self.infil_model is None:
# self.infil_model = HortonInfiltration()
# self.infil_model.set_defaults()
# else:
# enum_val = self.infil_model.model_type()
# if enum_val == E_InfilModel.HORTON or \
# enum_val == E_InfilModel.MODIFIED_HORTON:
# self.infil_model_horton.__dict__.update(self.infil_model.__dict__)
# elif enum_val == E_InfilModel.GREEN_AMPT or \
# enum_val == E_InfilModel.MODIFIED_GREEN_AMPT:
# self.infil_model_ga.__dict__.update(self.infil_model.__dict__)
# elif enum_val == E_InfilModel.CURVE_NUMBER:
# self.infil_model_cn.__dict__.update(self.infil_model.__dict__)
self.cboInfilModel.setEnabled(True)
if self.lblNotes:
self.tblGeneric.currentCellChanged.connect(self.table_currentCellChanged)
self.tblGeneric.itemChanged.connect(self.table_itemChanged)
pass
else:
self.backend = PropertyEditorBackend(self.tblGeneric, self.lblNotes, parent, edit_these, new_item)
#self.lblTop.setText("Infiltration Method: " + parent.project.find_section('OPTIONS').infiltration)
proj_infilmodel = parent.project.find_section('OPTIONS').infiltration
enum_val = E_InfilModel[proj_infilmodel.upper()]
self.cboInfilModel.setEnabled(False)
set_combo_items(type(enum_val), self.cboInfilModel)
set_combo(self.cboInfilModel, enum_val)
self.corner_label = QtGui.QLabel("Property", self.tblGeneric)
self.corner_label.setAlignment(QtCore.Qt.AlignCenter)
self.corner_label.setAttribute(QtCore.Qt.WA_TransparentForMouseEvents)
QtCore.QObject.connect(self.tblGeneric.verticalHeader(),
QtCore.SIGNAL("geometriesChanged()"), self.resizeCorner)
QtCore.QObject.connect(self.tblGeneric.horizontalHeader(),
QtCore.SIGNAL("geometriesChanged()"), self.resizeCorner)
def set_tab_hydraulics(self):
"""
setup the hydraulic parameter defaults tab entries
Returns:
"""
properties = [
"Node Invert", "Node Max. Depth", "Node Ponded Area",
"Conduit Length", "Conduit Geometry", "Conduit Roughness",
"Flow Units", "Link Offsets", "Routing Method",
"Force Main Equation"
]
#self.parameters_def_values = [0, 0, 0, 400, "CIRCULAR", 0.01, "CFS", "DEPTH", "KINWAVE", "H_W"]
self.tbl_3.setColumnCount(1)
self.tbl_3.setRowCount(len(self.defaults.parameters_keys))
self.tbl_3.setHorizontalHeaderLabels(["Default Value"])
self.tbl_3.setVerticalHeaderLabels(properties)
for i in range(0, len(self.defaults.parameters_keys)):
combobox = None
key = self.defaults.parameters_keys[i]
def_val = self.defaults.parameters_values[key]
if "flow_units" in key.lower():
combobox = QComboBox()
enum_val = FlowUnits[def_val]
elif "link_offsets" in key.lower():
combobox = QComboBox()
enum_val = LinkOffsets[def_val]
elif "routing_model" in key.lower():
combobox = QComboBox()
enum_val = FlowRouting[def_val.upper()]
elif "force_main" in key.lower():
combobox = QComboBox()
if def_val.upper() == "H-W":
enum_val = ForceMainEquation['H_W']
if def_val.upper() == "D-W":
enum_val = ForceMainEquation['D_W']
if combobox is not None:
combobox.setObjectName(key + "|" + str(i) + "|0")
set_combo_items(type(enum_val), combobox)
set_combo(combobox, enum_val)
combobox.currentIndexChanged.connect(self.sm_hydraulics.map)
self.sm_hydraulics.setMapping(combobox, i)
self.tbl_3.setCellWidget(i, 0, combobox)
else:
if "conduit_shape" in key.lower():
self.set_channel_cell(0)
else:
self.tbl_3.setItem(i, 0, QTableWidgetItem(str(def_val)))
pass
def set_tab_hydraulics(self):
"""
setup the hydraulic parameter defaults tab entries
Returns:
"""
#self.parameters = ["Flow Units", "Headloss Formula", "Specific Gravity", "Relative Viscosity",
# "Maximum Trials", "Accuracy", "If Unbalanced", "Default Pattern", "Demand Multiplier",
# "Emitter Exponent", "Status Report", "Check Frequency", "Max Check", "Damp Limit"]
#self.parameters_def_values = ["GPM", "H_W", 1.0, 1.0, 40, 0.001, "Continue", 1, 1.0, 0.5, "Yes",
# "", "", ""]
self.tbl_3.setColumnCount(1)
self.tbl_3.setRowCount(len(self.defaults.parameters_keys))
self.tbl_3.setHorizontalHeaderLabels(["Default Value"])
self.tbl_3.setVerticalHeaderLabels(self.defaults.parameters_keys)
for i in range(0, len(self.defaults.parameters_keys) - 1):
combobox = None
#def_val = self.parameters_def_values[self.parameters.index(self.parameters[i])]
def_val = self.defaults.parameters_values[
self.defaults.parameters_keys[i]]
#if self.qsettings:
# def_val = unicode(self.qsettings.value("Defaults/" + self.parameters[i], def_val))
key = self.defaults.parameters_keys[i].lower()
if "flow units" in key:
combobox = QtGui.QComboBox()
enum_val = FlowUnits[def_val]
elif "headloss" in key:
combobox = QtGui.QComboBox()
enum_val = HeadLoss[def_val.replace("-", "_")]
elif "unbalanced" in key:
combobox = QtGui.QComboBox()
enum_val = Unbalanced[def_val.upper()]
elif "status report" in key:
combobox = QtGui.QComboBox()
enum_val = StatusWrite[def_val.upper()]
if combobox is not None:
combobox.setObjectName(key + "|" + str(i) + "|0")
set_combo_items(type(enum_val), combobox)
set_combo(combobox, enum_val)
QtCore.QObject.connect(
combobox, QtCore.SIGNAL("currentIndexChanged(int)"),
self.sm_hydraulics, QtCore.SLOT("map()"))
self.sm_hydraulics.setMapping(combobox, i)
self.tbl_3.setCellWidget(i, 0, combobox)
else:
self.tbl_3.setItem(i, 0,
QtGui.QTableWidgetItem(unicode(def_val)))
pass
def set_tab_hydraulics(self):
"""
setup the hydraulic parameter defaults tab entries
Returns:
"""
#self.parameters = ["Node Invert", "Node Max. Depth", "Node Ponded Area", "Conduit Length", "Conduit Geometry",
# "Conduit Roughness", "Flow Units", "Link Offsets", "Routing Method", "Force Main Equation"]
#self.parameters_def_values = [0, 0, 0, 400, "CIRCULAR", 0.01, "CFS", "DEPTH", "KINWAVE", "H_W"]
self.tbl_3.setColumnCount(1)
self.tbl_3.setRowCount(len(self.defaults.parameters_keys))
self.tbl_3.setHorizontalHeaderLabels(["Default Value"])
self.tbl_3.setVerticalHeaderLabels(self.defaults.parameters_keys)
for i in range(0, len(self.defaults.parameters_keys)):
combobox = None
key = self.defaults.parameters_keys[i]
def_val = self.defaults.parameters_values[key]
if "flow units" in key.lower():
combobox = QtGui.QComboBox()
enum_val = FlowUnits[def_val]
elif "link offsets" in key.lower():
combobox = QtGui.QComboBox()
enum_val = LinkOffsets[def_val]
elif "routing method" in key.lower():
combobox = QtGui.QComboBox()
enum_val = FlowRouting[def_val.upper()]
elif "force main" in key.lower():
combobox = QtGui.QComboBox()
enum_val = ForceMainEquation[def_val.upper()]
if combobox is not None:
combobox.setObjectName(key + "|" + str(i) + "|0")
set_combo_items(type(enum_val), combobox)
set_combo(combobox, enum_val)
QtCore.QObject.connect(
combobox, QtCore.SIGNAL("currentIndexChanged(int)"),
self.sm_hydraulics, QtCore.SLOT("map()"))
self.sm_hydraulics.setMapping(combobox, i)
self.tbl_3.setCellWidget(i, 0, combobox)
else:
if "conduit geometry" in key.lower():
self.set_channel_cell(0)
else:
self.tbl_3.setItem(
i, 0, QtGui.QTableWidgetItem(unicode(def_val)))
pass
def set_tab_properties(self):
"""
setup object property defaults tab entries
Returns:
"""
#self.properties = {"Node Elevation" : 0, "Tank Diameter" : 50, "Tank Height" : 20, "Pipe Length" : 1000,
# "Pipe Diameter" : 12, "Pipe Roughness" : 100, "Auto Length" : "Off"}
#self.properties = ["Node Elevation", "Tank Diameter", "Tank Height", "Pipe Length",
# "Pipe Diameter", "Pipe Roughness", "Auto Length"]
#self.properties_def_values = [0, 50, 20, 1000, 12, 100, "Off"]
self.tbl_2.setColumnCount(1)
self.tbl_2.setRowCount(len(self.defaults.properties_keys))
self.tbl_2.setHorizontalHeaderLabels(["Default Value"])
self.tbl_2.setVerticalHeaderLabels(self.defaults.properties_keys)
for i in range(0, len(self.defaults.properties_keys)):
def_val = self.defaults.properties_values[
self.defaults.properties_keys[i]]
#if self.qsettings:
# def_val = unicode(self.qsettings.value("Defaults/" + self.properties[i], def_val))
key = self.defaults.properties_keys[i].lower()
if "auto" in key:
self.autolen_on = "Off"
if def_val is not None:
self.autolen_on = def_val
#if self.qsettings:
# self.autolen_on = unicode(
# self.qsettings.value("Defaults/" + self.properties[len(self.properties) - 1], "Off"))
#self.tbl_2.setItem(self.tbl_2.rowCount() - 1, 0, QtGui.QTableWidgetItem(self.autolen_on))
combobox = QtGui.QComboBox()
combobox.addItem("On")
combobox.addItem("Off")
set_combo(combobox, self.autolen_on)
combobox.setObjectName(key + "|" + str(i) + "|0")
QtCore.QObject.connect(
combobox, QtCore.SIGNAL("currentIndexChanged(int)"),
self.sm_property, QtCore.SLOT("map()"))
self.sm_property.setMapping(combobox, i)
self.tbl_2.setCellWidget(i, 0, combobox)
else:
self.tbl_2.setItem(i, 0,
QtGui.QTableWidgetItem(unicode(def_val)))
pass