def calc_emissions(tile_id, emitted_pools, sensit_type, folder, no_upload):
uu.print_log("Calculating gross emissions for", tile_id, "using",
sensit_type, "model type...")
start = datetime.datetime.now()
# Runs the correct c++ script given the emitted_pools (biomass+soil or soil_only) and model type selected.
# soil_only, no_shiftin_ag, and convert_to_grassland have special gross emissions C++ scripts.
# The other sensitivity analyses and the standard model all use the same gross emissions C++ script.
if (emitted_pools == 'soil_only') & (sensit_type == 'std'):
cmd = [
'{0}/calc_gross_emissions_soil_only.exe'.format(
cn.c_emis_compile_dst), tile_id, sensit_type, folder
]
elif (emitted_pools == 'biomass_soil') & (
sensit_type in ['convert_to_grassland', 'no_shifting_ag']):
cmd = [
'{0}/calc_gross_emissions_{1}.exe'.format(cn.c_emis_compile_dst,
sensit_type), tile_id,
sensit_type, folder
]
# This C++ script has an extra argument that names the input carbon emitted_pools and output emissions correctly
elif (emitted_pools == 'biomass_soil') & (
sensit_type not in ['no_shifting_ag', 'convert_to_grassland']):
cmd = [
'{0}/calc_gross_emissions_generic.exe'.format(
cn.c_emis_compile_dst), tile_id, sensit_type, folder
]
else:
uu.exception_log(no_upload,
'Pool and/or sensitivity analysis option not valid')
uu.log_subprocess_output_full(cmd)
# Identifies which pattern to use for counting tile completion
pattern = cn.pattern_gross_emis_commod_biomass_soil
if (emitted_pools == 'biomass_soil') & (sensit_type == 'std'):
pattern = pattern
elif (emitted_pools == 'biomass_soil') & (sensit_type != 'std'):
pattern = pattern + "_" + sensit_type
elif emitted_pools == 'soil_only':
pattern = pattern.replace('biomass_soil', 'soil_only')
else:
uu.exception_log(no_upload, 'Pool option not valid')
# Prints information about the tile that was just processed
uu.end_of_fx_summary(start, tile_id, pattern, no_upload)
def mp_create_supplementary_outputs(sensit_type, tile_id_list, run_date=None):
os.chdir(cn.docker_base_dir)
# If a full model run is specified, the correct set of tiles for the particular script is listed
if tile_id_list == 'all':
# List of tiles to run in the model
tile_id_list_outer = uu.tile_list_s3(cn.net_flux_dir, sensit_type)
uu.print_log(tile_id_list_outer)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list_outer))) +
"\n")
# Files to download for this script
download_dict = {
cn.cumul_gain_AGCO2_BGCO2_all_types_dir:
[cn.pattern_cumul_gain_AGCO2_BGCO2_all_types],
cn.gross_emis_all_gases_all_drivers_biomass_soil_dir:
[cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil],
cn.net_flux_dir: [cn.pattern_net_flux]
}
# List of output directories and output file name patterns.
# Outputs must be in the same order as the download dictionary above, and then follow the same order for all outputs.
# Currently, it's: per pixel full extent, per hectare forest extent, per pixel forest extent.
output_dir_list = [
cn.cumul_gain_AGCO2_BGCO2_all_types_per_pixel_full_extent_dir,
cn.cumul_gain_AGCO2_BGCO2_all_types_forest_extent_dir,
cn.cumul_gain_AGCO2_BGCO2_all_types_per_pixel_forest_extent_dir, cn.
gross_emis_all_gases_all_drivers_biomass_soil_per_pixel_full_extent_dir,
cn.gross_emis_all_gases_all_drivers_biomass_soil_forest_extent_dir, cn.
gross_emis_all_gases_all_drivers_biomass_soil_per_pixel_forest_extent_dir,
cn.net_flux_per_pixel_full_extent_dir, cn.net_flux_forest_extent_dir,
cn.net_flux_per_pixel_forest_extent_dir
]
output_pattern_list = [
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types_per_pixel_full_extent,
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types_forest_extent,
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types_per_pixel_forest_extent,
cn.
pattern_gross_emis_all_gases_all_drivers_biomass_soil_per_pixel_full_extent,
cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil_forest_extent,
cn.
pattern_gross_emis_all_gases_all_drivers_biomass_soil_per_pixel_forest_extent,
cn.pattern_net_flux_per_pixel_full_extent,
cn.pattern_net_flux_forest_extent,
cn.pattern_net_flux_per_pixel_forest_extent
]
# Pixel area tiles-- necessary for calculating per pixel values
uu.s3_flexible_download(cn.pixel_area_dir, cn.pattern_pixel_area,
cn.docker_base_dir, sensit_type,
tile_id_list_outer)
# Tree cover density, Hansen gain, and mangrove biomass tiles-- necessary for masking to forest extent
uu.s3_flexible_download(cn.tcd_dir, cn.pattern_tcd, cn.docker_base_dir,
sensit_type, tile_id_list_outer)
uu.s3_flexible_download(cn.gain_dir, cn.pattern_gain, cn.docker_base_dir,
sensit_type, tile_id_list_outer)
uu.s3_flexible_download(cn.mangrove_biomass_2000_dir,
cn.pattern_mangrove_biomass_2000,
cn.docker_base_dir, sensit_type,
tile_id_list_outer)
uu.print_log("Model outputs to process are:", download_dict)
# If the model run isn't the standard one, the output directory is changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
output_dir_list = uu.alter_dirs(sensit_type, output_dir_list)
# A date can optionally be provided by the full model script or a run of this script.
# This replaces the date in constants_and_names.
if run_date is not None:
output_dir_list = uu.replace_output_dir_date(output_dir_list, run_date)
# Iterates through input tile sets
for key, values in download_dict.items():
# Sets the directory and pattern for the input being processed
input_dir = key
input_pattern = values[0]
# If a full model run is specified, the correct set of tiles for the particular script is listed.
# A new list is named so that tile_id_list stays as the command line argument.
if tile_id_list == 'all':
# List of tiles to run in the model
tile_id_list_input = uu.tile_list_s3(input_dir, sensit_type)
else:
tile_id_list_input = tile_id_list
uu.print_log(tile_id_list_input)
uu.print_log("There are {} tiles to process".format(
str(len(tile_id_list_input))) + "\n")
uu.print_log("Downloading tiles from", input_dir)
uu.s3_flexible_download(input_dir, input_pattern, cn.docker_base_dir,
sensit_type, tile_id_list_input)
# Blank list of output patterns, populated below
output_patterns = []
# Matches the output patterns with the input pattern.
# This requires that the output patterns be grouped by input pattern and be in the order described in
# the comment above.
if "gross_removals" in input_pattern:
output_patterns = output_pattern_list[0:3]
elif "gross_emis" in input_pattern:
output_patterns = output_pattern_list[3:6]
elif "net_flux" in input_pattern:
output_patterns = output_pattern_list[6:9]
else:
uu.exception_log(
"No output patterns found for input pattern. Please check.")
uu.print_log("Input pattern:", input_pattern)
uu.print_log("Output patterns:", output_patterns)
# Gross removals: 20 processors = >740 GB peak; 15 = 570 GB peak; 17 = 660 GB peak; 18 = 670 GB peak
# Gross emissions: 17 processors = 660 GB peak; 18 = 710 GB peak
if cn.count == 96:
processes = 18
else:
processes = 2
uu.print_log(
"Creating derivative outputs for {0} with {1} processors...".
format(input_pattern, processes))
pool = multiprocessing.Pool(processes)
pool.map(
partial(create_supplementary_outputs.create_supplementary_outputs,
input_pattern=input_pattern,
output_patterns=output_patterns,
sensit_type=sensit_type), tile_id_list_input)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list_input:
# create_supplementary_outputs.create_supplementary_outputs(tile_id, input_pattern, output_patterns, sensit_type)
# Checks the two forest extent output tiles created from each input tile for whether there is data in them.
# Because the extent is restricted in the forest extent pixels, some tiles with pixels in the full extent
# version may not have pixels in the forest extent version.
for output_pattern in output_patterns[1:3]:
if cn.count <= 2: # For local tests
processes = 1
uu.print_log(
"Checking for empty tiles of {0} pattern with {1} processors using light function..."
.format(output_pattern, processes))
pool = multiprocessing.Pool(processes)
pool.map(
partial(uu.check_and_delete_if_empty_light,
output_pattern=output_pattern), tile_id_list_input)
pool.close()
pool.join()
else:
processes = 55 # 50 processors = 560 GB peak for gross removals; 55 = XXX GB peak
uu.print_log(
"Checking for empty tiles of {0} pattern with {1} processors..."
.format(output_pattern, processes))
pool = multiprocessing.Pool(processes)
pool.map(
partial(uu.check_and_delete_if_empty,
output_pattern=output_pattern), tile_id_list_input)
pool.close()
pool.join()
# Uploads output tiles to s3
for i in range(0, len(output_dir_list)):
uu.upload_final_set(output_dir_list[i], output_pattern_list[i])
def mp_plantation_preparation(gadm_index_shp, planted_index_shp):
os.chdir(cn.docker_base_dir)
# ## Not actually using this but leaving it here in case I want to add this functionality eventually. This
# # was to allow users to run plantations for a select (contiguous) area rather than for the whole planet.
# # List of bounding box coordinates
# bound_list = args.bounding_box
# # Checks if bounding box coordinates are in multiples of 10 (10 degree tiles). If they're not, the script stops.
# for bound in bound_list:
# if bound%10:
# uu.exception_log(bound, 'not a multiple of 10. Please make bounding box coordinates are multiples of 10.')
# Checks the validity of the two arguments. If either one is invalid, the script ends.
if (gadm_index_path not in cn.gadm_plant_1x1_index_dir or planted_index_path not in cn.gadm_plant_1x1_index_dir):
uu.exception_log('Invalid inputs. Please provide None or s3 shapefile locations for both arguments.')
# List of all possible 10x10 Hansen tiles except for those at very extreme latitudes (not just WHRC biomass tiles)
total_tile_list = uu.tile_list_s3(cn.pixel_area_dir)
uu.print_log("Number of possible 10x10 tiles to evaluate:", len(total_tile_list))
# Removes the latitude bands that don't have any planted forests in them according to Liz Goldman.
# i.e., Liz Goldman said by Slack on 1/2/19 that the nothernmost planted forest is 69.5146 and the southernmost is -46.938968.
# This creates a more focused list of 10x10 tiles to iterate through (removes ones that definitely don't have planted forest).
# NOTE: If the planted forest gdb is updated, the list of latitudes to exclude below may need to be changed to not exclude certain latitude bands.
planted_lat_tile_list = [tile for tile in total_tile_list if '90N' not in tile]
planted_lat_tile_list = [tile for tile in planted_lat_tile_list if '80N' not in tile]
planted_lat_tile_list = [tile for tile in planted_lat_tile_list if '50S' not in tile]
planted_lat_tile_list = [tile for tile in planted_lat_tile_list if '60S' not in tile]
planted_lat_tile_list = [tile for tile in planted_lat_tile_list if '70S' not in tile]
planted_lat_tile_list = [tile for tile in planted_lat_tile_list if '80S' not in tile]
# planted_lat_tile_list = ['10N_080W']
uu.print_log(planted_lat_tile_list)
uu.print_log("Number of 10x10 tiles to evaluate after extreme latitudes have been removed:", len(planted_lat_tile_list))
# If a planted forest extent 1x1 tile index shapefile isn't supplied
if 'None' in args.planted_tile_index:
### Entry point 1:
# If no shapefile of 1x1 tiles for countries with planted forests is supplied, 1x1 tiles of country extents will be created.
# This runs the process from the very beginning and will take a few days.
if 'None' in args.gadm_tile_index:
uu.print_log("No GADM 1x1 tile index shapefile provided. Creating 1x1 planted forest country tiles from scratch...")
# Downloads and unzips the GADM shapefile, which will be used to create 1x1 tiles of land areas
uu.s3_file_download(cn.gadm_path, cn.docker_base_dir)
cmd = ['unzip', cn.gadm_zip]
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
# Creates a new GADM shapefile with just the countries that have planted forests in them.
# This limits creation of 1x1 rasters of land area on the countries that have planted forests rather than on all countries.
# NOTE: If the planted forest gdb is updated and has new countries added to it, the planted forest country list
# in constants_and_names.py must be updated, too.
uu.print_log("Creating shapefile of countries with planted forests...")
os.system('''ogr2ogr -sql "SELECT * FROM gadm_3_6_adm2_final WHERE iso IN ({0})" {1} gadm_3_6_adm2_final.shp'''.format(str(cn.plantation_countries)[1:-1], cn.gadm_iso))
# Creates 1x1 degree tiles of countries that have planted forests in them.
# I think this can handle using 50 processors because it's not trying to upload files to s3 and the tiles are small.
# This takes several days to run because it iterates through at least 250 10x10 tiles.
# For multiprocessor use.
processes = 50
uu.print_log('Rasterize GADM 1x1 max processors=', processes)
pool = Pool(processes)
pool.map(plantation_preparation.rasterize_gadm_1x1, planted_lat_tile_list)
pool.close()
pool.join()
# # Creates 1x1 degree tiles of countries that have planted forests in them.
# # For single processor use.
# for tile in planted_lat_tile_list:
#
# plantation_preparation.rasterize_gadm_1x1(tile)
# Creates a shapefile of the boundaries of the 1x1 GADM tiles in countries with planted forests
os.system('''gdaltindex {0}_{1}.shp GADM_*.tif'''.format(cn.pattern_gadm_1x1_index, uu.date_time_today))
cmd = ['aws', 's3', 'cp', cn.docker_base_dir, cn.gadm_plant_1x1_index_dir, '--exclude', '*', '--include', '{}*'.format(cn.pattern_gadm_1x1_index), '--recursive']
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
# # Saves the 1x1 country extent tiles to s3
# # Only use if the entire process can't run in one go on the spot machine
# cmd = ['aws', 's3', 'cp', cn.docker_base_dir, 's3://gfw2-data/climate/carbon_model/temp_spotmachine_output/', '--exclude', '*', '--include', 'GADM_*.tif', '--recursive']
# # Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
# process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
# with process.stdout:
# uu.log_subprocess_output(process.stdout)
# Delete the aux.xml files
os.system('''rm GADM*.tif.*''')
# List of all 1x1 degree countey extent tiles created
gadm_list_1x1 = uu.tile_list_spot_machine(".", "GADM_")
uu.print_log("List of 1x1 degree tiles in countries that have planted forests, with defining coordinate in the northwest corner:", gadm_list_1x1)
uu.print_log(len(gadm_list_1x1))
### Entry point 2:
# If a shapefile of the boundaries of 1x1 degree tiles of countries with planted forests is supplied,
# a list of the 1x1 tiles is created from the shapefile.
# This avoids creating the 1x1 country extent tiles all over again because the relevant tile extent are supplied
# in the shapefile.
elif cn.gadm_plant_1x1_index_dir in args.gadm_tile_index:
uu.print_log("Country extent 1x1 tile index shapefile supplied. Using that to create 1x1 planted forest tiles...")
uu.print_log('{}/'.format(gadm_index_path))
# Copies the shapefile of 1x1 tiles of extent of countries with planted forests
cmd = ['aws', 's3', 'cp', '{}/'.format(gadm_index_path), cn.docker_base_dir, '--recursive', '--exclude', '*', '--include', '{}*'.format(gadm_index_shp)]
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
# Gets the attribute table of the country extent 1x1 tile shapefile
gadm = glob.glob('{}*.dbf'.format(cn.pattern_gadm_1x1_index))[0]
# Converts the attribute table to a dataframe
dbf = Dbf5(gadm)
df = dbf.to_dataframe()
# Converts the column of the dataframe with the names of the tiles (which contain their coordinates) to a list
gadm_list_1x1 = df['location'].tolist()
gadm_list_1x1 = [str(y) for y in gadm_list_1x1]
uu.print_log("List of 1x1 degree tiles in countries that have planted forests, with defining coordinate in the northwest corner:", gadm_list_1x1)
uu.print_log("There are", len(gadm_list_1x1), "1x1 country extent tiles to iterate through.")
# In case some other arguments are provided
else:
uu.exception_log('Invalid GADM tile index shapefile provided. Please provide a valid shapefile.')
# Creates 1x1 degree tiles of plantation growth wherever there are plantations.
# Because this is iterating through all 1x1 tiles in countries with planted forests, it first checks
# whether each 1x1 tile intersects planted forests before creating a 1x1 planted forest tile for that
# 1x1 country extent tile.
# 55 processors seems to use about 350 GB of memory, which seems fine. But there was some error about "PQconnectdb failed-- sorry, too many clients already".
# So, moved the number of processors down to 48.
# For multiprocessor use
processes = 48
uu.print_log('Create 1x1 plantation from 1x1 gadm max processors=', processes)
pool = Pool(processes)
pool.map(plantation_preparation.create_1x1_plantation_from_1x1_gadm, gadm_list_1x1)
pool.close()
pool.join()
# # Creates 1x1 degree tiles of plantation growth wherever there are plantations
# # For single processor use
# for tile in gadm_list_1x1:
#
# plantation_preparation.create_1x1_plantation(tile)
# Creates a shapefile in which each feature is the extent of a plantation extent tile.
# This index shapefile can be used the next time this process is run if starting with Entry Point 3.
os.system('''gdaltindex {0}_{1}.shp plant_gain_*.tif'''.format(cn.pattern_plant_1x1_index, uu.date_time_today))
cmd = ['aws', 's3', 'cp', cn.docker_base_dir, cn.gadm_plant_1x1_index_dir, '--exclude', '*', '--include', '{}*'.format(cn.pattern_plant_1x1_index), '--recursive']
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
### Entry point 3
# If a shapefile of the extents of 1x1 planted forest tiles is provided.
# This is the part that actually creates the sequestration rate and forest type tiles.
if cn.pattern_plant_1x1_index in args.planted_tile_index:
uu.print_log("Planted forest 1x1 tile index shapefile supplied. Using that to create 1x1 planted forest growth rate and forest type tiles...")
# Copies the shapefile of 1x1 tiles of extent of planted forests
cmd = ['aws', 's3', 'cp', '{}/'.format(planted_index_path), cn.docker_base_dir, '--recursive', '--exclude', '*', '--include',
'{}*'.format(planted_index_shp), '--recursive']
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
# Gets the attribute table of the planted forest extent 1x1 tile shapefile
gadm = glob.glob('{}*.dbf'.format(cn.pattern_plant_1x1_index))[0]
# Converts the attribute table to a dataframe
dbf = Dbf5(gadm)
df = dbf.to_dataframe()
# Converts the column of the dataframe with the names of the tiles (which contain their coordinates) to a list
planted_list_1x1 = df['location'].tolist()
planted_list_1x1 = [str(y) for y in planted_list_1x1]
uu.print_log("List of 1x1 degree tiles in countries that have planted forests, with defining coordinate in the northwest corner:", planted_list_1x1)
uu.print_log("There are", len(planted_list_1x1), "1x1 planted forest extent tiles to iterate through.")
# Creates 1x1 degree tiles of plantation growth and type wherever there are plantations.
# Because this is iterating through only 1x1 tiles that are known to have planted forests (from a previous run
# of this script), it does not need to check whether there are planted forests in this tile. It goes directly
# to intersecting the planted forest table with the 1x1 tile.
# For single processor use
#for tile in planted_list_1x1:
# plantation_preparation.create_1x1_plantation_growth_from_1x1_planted(tile)
# For multiprocessor use
# processes=40 uses about 360 GB of memory. Works on r4.16xlarge with space to spare
# processes=52 uses about 465 GB of memory (quite stably), so this is basically the max.
num_of_processes = 52
pool = Pool(num_of_processes)
pool.map(plantation_preparation.create_1x1_plantation_growth_from_1x1_planted, planted_list_1x1)
pool.close()
pool.join()
# This works with 50 processors on an r4.16xlarge marchine. Uses about 430 GB out of 480 GB.
num_of_processes = 52
pool = Pool(num_of_processes)
processes = 50
uu.print_log('Create 1x1 plantation type max processors=', processes)
pool = Pool(processes)
pool.map(plantation_preparation.create_1x1_plantation_type_from_1x1_planted, planted_list_1x1)
pool.close()
pool.join()
# This rasterizes the plantation removal factor standard deviations
# processes=50 peaks at about 450 GB
num_of_processes = 50
pool = Pool(num_of_processes)
pool.map(plantation_preparation.create_1x1_plantation_stdev_from_1x1_planted, planted_list_1x1)
pool.close()
pool.join()
def mp_calculate_gross_emissions(sensit_type,
tile_id_list,
emitted_pools,
run_date=None):
os.chdir(cn.docker_base_dir)
folder = cn.docker_base_dir
# If a full model run is specified, the correct set of tiles for the particular script is listed
# If the tile_list argument is an s3 folder, the list of tiles in it is created
if tile_id_list == 'all':
# List of tiles to run in the model
tile_id_list = uu.tile_list_s3(cn.AGC_emis_year_dir, sensit_type)
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) + "\n")
# Files to download for this script
download_dict = {
cn.AGC_emis_year_dir: [cn.pattern_AGC_emis_year],
cn.BGC_emis_year_dir: [cn.pattern_BGC_emis_year],
cn.deadwood_emis_year_2000_dir: [cn.pattern_deadwood_emis_year_2000],
cn.litter_emis_year_2000_dir: [cn.pattern_litter_emis_year_2000],
cn.soil_C_emis_year_2000_dir: [cn.pattern_soil_C_emis_year_2000],
cn.peat_mask_dir: [cn.pattern_peat_mask],
cn.ifl_primary_processed_dir: [cn.pattern_ifl_primary],
cn.planted_forest_type_unmasked_dir:
[cn.pattern_planted_forest_type_unmasked],
cn.drivers_processed_dir: [cn.pattern_drivers],
cn.climate_zone_processed_dir: [cn.pattern_climate_zone],
cn.bor_tem_trop_processed_dir: [cn.pattern_bor_tem_trop_processed],
cn.burn_year_dir: [cn.pattern_burn_year]
}
# Special loss tiles for the Brazil and Mekong sensitivity analyses
if sensit_type == 'legal_Amazon_loss':
download_dict[cn.Brazil_annual_loss_processed_dir] = [
cn.pattern_Brazil_annual_loss_processed
]
elif sensit_type == 'Mekong_loss':
download_dict[cn.Mekong_loss_processed_dir] = [
cn.pattern_Mekong_loss_processed
]
else:
download_dict[cn.loss_dir] = [cn.pattern_loss]
# Checks the validity of the emitted_pools argument
if (emitted_pools not in ['soil_only', 'biomass_soil']):
uu.exception_log(
'Invalid pool input. Please choose soil_only or biomass_soil.')
# Checks if the correct c++ script has been compiled for the pool option selected
if emitted_pools == 'biomass_soil':
# Output file directories for biomass+soil. Must be in same order as output pattern directories.
output_dir_list = [
cn.gross_emis_commod_biomass_soil_dir,
cn.gross_emis_shifting_ag_biomass_soil_dir,
cn.gross_emis_forestry_biomass_soil_dir,
cn.gross_emis_wildfire_biomass_soil_dir,
cn.gross_emis_urban_biomass_soil_dir,
cn.gross_emis_no_driver_biomass_soil_dir,
cn.gross_emis_all_gases_all_drivers_biomass_soil_dir,
cn.gross_emis_co2_only_all_drivers_biomass_soil_dir,
cn.gross_emis_non_co2_all_drivers_biomass_soil_dir,
cn.gross_emis_nodes_biomass_soil_dir
]
output_pattern_list = [
cn.pattern_gross_emis_commod_biomass_soil,
cn.pattern_gross_emis_shifting_ag_biomass_soil,
cn.pattern_gross_emis_forestry_biomass_soil,
cn.pattern_gross_emis_wildfire_biomass_soil,
cn.pattern_gross_emis_urban_biomass_soil,
cn.pattern_gross_emis_no_driver_biomass_soil,
cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil,
cn.pattern_gross_emis_co2_only_all_drivers_biomass_soil,
cn.pattern_gross_emis_non_co2_all_drivers_biomass_soil,
cn.pattern_gross_emis_nodes_biomass_soil
]
# Some sensitivity analyses have specific gross emissions scripts.
# The rest of the sensitivity analyses and the standard model can all use the same, generic gross emissions script.
if sensit_type in ['no_shifting_ag', 'convert_to_grassland']:
# if os.path.exists('../carbon-budget/emissions/cpp_util/calc_gross_emissions_{}.exe'.format(sensit_type)):
if os.path.exists('{0}/calc_gross_emissions_{1}.exe'.format(
cn.c_emis_compile_dst, sensit_type)):
uu.print_log(
"C++ for {} already compiled.".format(sensit_type))
else:
uu.exception_log(
'Must compile {} model C++...'.format(sensit_type))
else:
if os.path.exists('{0}/calc_gross_emissions_generic.exe'.format(
cn.c_emis_compile_dst)):
uu.print_log("C++ for generic emissions already compiled.")
else:
uu.exception_log('Must compile generic emissions C++...')
elif (emitted_pools == 'soil_only') & (sensit_type == 'std'):
if os.path.exists('{0}/calc_gross_emissions_soil_only.exe'.format(
cn.c_emis_compile_dst)):
uu.print_log("C++ for soil_only already compiled.")
# Output file directories for soil_only. Must be in same order as output pattern directories.
output_dir_list = [
cn.gross_emis_commod_soil_only_dir,
cn.gross_emis_shifting_ag_soil_only_dir,
cn.gross_emis_forestry_soil_only_dir,
cn.gross_emis_wildfire_soil_only_dir,
cn.gross_emis_urban_soil_only_dir,
cn.gross_emis_no_driver_soil_only_dir,
cn.gross_emis_all_gases_all_drivers_soil_only_dir,
cn.gross_emis_co2_only_all_drivers_soil_only_dir,
cn.gross_emis_non_co2_all_drivers_soil_only_dir,
cn.gross_emis_nodes_soil_only_dir
]
output_pattern_list = [
cn.pattern_gross_emis_commod_soil_only,
cn.pattern_gross_emis_shifting_ag_soil_only,
cn.pattern_gross_emis_forestry_soil_only,
cn.pattern_gross_emis_wildfire_soil_only,
cn.pattern_gross_emis_urban_soil_only,
cn.pattern_gross_emis_no_driver_soil_only,
cn.pattern_gross_emis_all_gases_all_drivers_soil_only,
cn.pattern_gross_emis_co2_only_all_drivers_soil_only,
cn.pattern_gross_emis_non_co2_all_drivers_soil_only,
cn.pattern_gross_emis_nodes_soil_only
]
else:
uu.exception_log('Must compile soil_only C++...')
else:
uu.exception_log('Pool and/or sensitivity analysis option not valid')
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, folder, sensit_type,
tile_id_list)
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
output_dir_list = uu.alter_dirs(sensit_type, output_dir_list)
output_pattern_list = uu.alter_patterns(sensit_type,
output_pattern_list)
uu.print_log(output_dir_list)
uu.print_log(output_pattern_list)
# A date can optionally be provided by the full model script or a run of this script.
# This replaces the date in constants_and_names.
if run_date is not None:
output_dir_list = uu.replace_output_dir_date(output_dir_list, run_date)
# The C++ code expects certain tiles for every input 10x10.
# However, not all Hansen tiles have all of these inputs.
# This function creates "dummy" tiles for all Hansen tiles that currently have non-existent tiles.
# That way, the C++ script gets all the necessary input files.
# If it doesn't get the necessary inputs, it skips that tile.
uu.print_log("Making blank tiles for inputs that don't currently exist")
# All of the inputs that need to have dummy tiles made in order to match the tile list of the carbon emitted_pools
pattern_list = [
cn.pattern_planted_forest_type_unmasked, cn.pattern_peat_mask,
cn.pattern_ifl_primary, cn.pattern_drivers,
cn.pattern_bor_tem_trop_processed, cn.pattern_burn_year,
cn.pattern_climate_zone, cn.pattern_soil_C_emis_year_2000
]
# textfile that stores the names of the blank tiles that are created for processing.
# This will be iterated through to delete the tiles at the end of the script.
uu.create_blank_tile_txt()
for pattern in pattern_list:
pool = multiprocessing.Pool(processes=60) # 60 = 100 GB peak
pool.map(
partial(uu.make_blank_tile,
pattern=pattern,
folder=folder,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for pattern in pattern_list:
# for tile in tile_id_list:
# uu.make_blank_tile(tile, pattern, folder, sensit_type)
# Calculates gross emissions for each tile
# count/4 uses about 390 GB on a r4.16xlarge spot machine.
# processes=18 uses about 440 GB on an r4.16xlarge spot machine.
if cn.count == 96:
if sensit_type == 'biomass_swap':
processes = 15 # 15 processors = XXX GB peak
else:
processes = 19 # 17 = 650 GB peak; 18 = 677 GB peak; 19 = 714 GB peak
else:
processes = 9
uu.print_log('Gross emissions max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(
partial(calculate_gross_emissions.calc_emissions,
emitted_pools=emitted_pools,
sensit_type=sensit_type,
folder=folder), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile in tile_id_list:
# calculate_gross_emissions.calc_emissions(tile, emitted_pools, sensit_type, folder)
# Print the list of blank created tiles, delete the tiles, and delete their text file
uu.list_and_delete_blank_tiles()
for i in range(0, len(output_pattern_list)):
pattern = output_pattern_list[i]
uu.print_log("Adding metadata tags for pattern {}".format(pattern))
if cn.count == 96:
processes = 45 # 45 processors = XXX GB peak
else:
processes = 9
uu.print_log('Adding metadata tags max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(
partial(calculate_gross_emissions.add_metadata_tags,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# for tile_id in tile_id_list:
# calculate_gross_emissions.add_metadata_tags(tile_id, pattern, sensit_type)
# Uploads emissions to appropriate directory for the carbon emitted_pools chosen
for i in range(0, len(output_dir_list)):
uu.upload_final_set(output_dir_list[i], output_pattern_list[i])
def main():
no_upload = False
sensit_type = "legal_Amazon_loss"
# Create the output log
uu.initiate_log()
os.chdir(cn.docker_base_dir)
Brazil_stages = ['all', 'create_forest_extent', 'create_loss']
# The argument for what kind of model run is being done: standard conditions or a sensitivity analysis run
parser = argparse.ArgumentParser(
description=
'Create tiles of forest extent in legal Amazon in 2000 and annual loss according to PRODES'
)
parser.add_argument(
'--stages',
'-s',
required=True,
help=
'Stages of creating Brazil legal Amazon-specific gross cumulative removals. Options are {}'
.format(Brazil_stages))
parser.add_argument(
'--run_through',
'-r',
required=True,
help=
'Options: true or false. true: run named stage and following stages. false: run only named stage.'
)
args = parser.parse_args()
stage_input = args.stages
run_through = args.run_through
# Checks the validity of the two arguments. If either one is invalid, the script ends.
if (stage_input not in Brazil_stages):
uu.exception_log(
no_upload, 'Invalid stage selection. Please provide a stage from',
Brazil_stages)
else:
pass
if (run_through not in ['true', 'false']):
uu.exception_log(
no_upload,
'Invalid run through option. Please enter true or false.')
else:
pass
actual_stages = uu.analysis_stages(Brazil_stages, stage_input, run_through,
sensit_type)
uu.print_log(actual_stages)
# By definition, this script is for US-specific removals
sensit_type = 'legal_Amazon_loss'
# List of output directories and output file name patterns
master_output_dir_list = [
cn.Brazil_forest_extent_2000_processed_dir,
cn.Brazil_annual_loss_processed_dir
]
master_output_pattern_list = [
cn.pattern_Brazil_forest_extent_2000_processed,
cn.pattern_Brazil_annual_loss_processed
]
# Creates forest extent 2000 raster from multiple PRODES forest extent rasters
###NOTE: Didn't redo this for model v1.2.0, so I don't know if it still works.
if 'create_forest_extent' in actual_stages:
uu.print_log('Creating forest extent tiles')
# List of tiles that could be run. This list is only used to create the FIA region tiles if they don't already exist.
tile_id_list = uu.tile_list_s3(cn.WHRC_biomass_2000_unmasked_dir)
# tile_id_list = ["00N_000E", "00N_050W", "00N_060W", "00N_010E", "00N_020E", "00N_030E", "00N_040E", "10N_000E", "10N_010E", "10N_010W", "10N_020E", "10N_020W"] # test tiles
# tile_id_list = ['50N_130W'] # test tiles
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# Downloads input rasters and lists them
uu.s3_folder_download(cn.Brazil_forest_extent_2000_raw_dir,
cn.docker_base_dir, sensit_type)
raw_forest_extent_inputs = glob.glob(
'*_AMZ_warped_*tif') # The list of tiles to merge
# Gets the resolution of a more recent PRODES raster, which has a higher resolution. The merged output matches that.
raw_forest_extent_input_2019 = glob.glob('*2019_AMZ_warped_*tif')
prodes_2019 = gdal.Open(raw_forest_extent_input_2019[0])
transform_2019 = prodes_2019.GetGeoTransform()
pixelSizeX = transform_2019[1]
pixelSizeY = -transform_2019[5]
uu.print_log(pixelSizeX)
uu.print_log(pixelSizeY)
# This merges all six rasters together, so it takes a lot of memory and time. It seems to repeatedly max out
# at about 300 GB as it progresses abot 15% each time; then the memory drops back to 0 and slowly increases.
cmd = [
'gdal_merge.py', '-o',
'{}.tif'.format(cn.pattern_Brazil_forest_extent_2000_merged),
'-co', 'COMPRESS=LZW', '-a_nodata', '0', '-n', '0', '-ot', 'Byte',
'-ps', '{}'.format(pixelSizeX), '{}'.format(pixelSizeY),
raw_forest_extent_inputs[0], raw_forest_extent_inputs[1],
raw_forest_extent_inputs[2], raw_forest_extent_inputs[3],
raw_forest_extent_inputs[4], raw_forest_extent_inputs[5]
]
uu.log_subprocess_output_full(cmd)
# Uploads the merged forest extent raster to s3 for future reference
uu.upload_final_set(cn.Brazil_forest_extent_2000_merged_dir,
cn.pattern_Brazil_forest_extent_2000_merged)
# Creates legal Amazon extent 2000 tiles
source_raster = '{}.tif'.format(
cn.pattern_Brazil_forest_extent_2000_merged)
out_pattern = cn.pattern_Brazil_forest_extent_2000_processed
dt = 'Byte'
pool = multiprocessing.Pool(int(cn.count / 2))
pool.map(
partial(uu.mp_warp_to_Hansen,
source_raster=source_raster,
out_pattern=out_pattern,
dt=dt,
no_upload=no_upload), tile_id_list)
# Checks if each tile has data in it. Only tiles with data are uploaded.
upload_dir = master_output_dir_list[0]
pattern = master_output_pattern_list[0]
pool = multiprocessing.Pool(cn.count - 5)
pool.map(
partial(uu.check_and_upload,
upload_dir=upload_dir,
pattern=pattern), tile_id_list)
# Creates annual loss raster for 2001-2019 from multiples PRODES rasters
if 'create_loss' in actual_stages:
uu.print_log('Creating annual PRODES loss tiles')
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# Downloads input rasters and lists them
cmd = [
'aws', 's3', 'cp', cn.Brazil_annual_loss_raw_dir, '.',
'--recursive'
]
uu.log_subprocess_output_full(cmd)
uu.print_log(
"Input loss rasters downloaded. Getting resolution of recent raster..."
)
# Gets the resolution of the more recent PRODES raster, which has a higher resolution. The merged output matches that.
raw_forest_extent_input_2019 = glob.glob('Prodes2019_*tif')
prodes_2019 = gdal.Open(raw_forest_extent_input_2019[0])
transform_2019 = prodes_2019.GetGeoTransform()
pixelSizeX = transform_2019[1]
pixelSizeY = -transform_2019[5]
uu.print_log(" Recent raster resolution: {0} by {1}".format(
pixelSizeX, pixelSizeY))
# This merges both loss rasters together, so it takes a lot of memory and time. It seems to max out
# at about 180 GB, then go back to 0.
# This took about 8 minutes.
uu.print_log(
"Merging input loss rasters into a composite for all years...")
cmd = [
'gdal_merge.py', '-o',
'{}.tif'.format(cn.pattern_Brazil_annual_loss_merged), '-co',
'COMPRESS=LZW', '-a_nodata', '0', '-n', '0', '-ot', 'Byte', '-ps',
'{}'.format(pixelSizeX), '{}'.format(pixelSizeY),
'Prodes2019_annual_loss_2008_2019.tif',
'Prodes2014_annual_loss_2001_2007.tif'
]
uu.log_subprocess_output_full(cmd)
uu.print_log(" Loss rasters combined into composite")
# Uploads the merged loss raster to s3 for future reference
uu.upload_final_set(cn.Brazil_annual_loss_merged_dir,
cn.pattern_Brazil_annual_loss_merged)
# Creates annual loss 2001-2015 tiles
uu.print_log("Warping composite PRODES loss to Hansen tiles...")
source_raster = '{}.tif'.format(cn.pattern_Brazil_annual_loss_merged)
out_pattern = cn.pattern_Brazil_annual_loss_processed
dt = 'Byte'
pool = multiprocessing.Pool(int(cn.count / 2))
pool.map(
partial(uu.mp_warp_to_Hansen,
source_raster=source_raster,
out_pattern=out_pattern,
dt=dt,
no_upload=no_upload), tile_id_list)
uu.print_log(" PRODES composite loss raster warped to Hansen tiles")
# Checks if each tile has data in it. Only tiles with data are uploaded.
# In practice, every Amazon tile has loss in it but I figured I'd do this just to be thorough.
upload_dir = master_output_dir_list[1]
pattern = master_output_pattern_list[1]
pool = multiprocessing.Pool(cn.count - 5)
pool.map(
partial(uu.check_and_upload,
upload_dir=upload_dir,
pattern=pattern), tile_id_list)
# Creates forest age category tiles
if 'forest_age_category' in actual_stages:
uu.print_log('Creating forest age category tiles')
# Files to download for this script.
download_dict = {
cn.Brazil_annual_loss_processed_dir:
[cn.pattern_Brazil_annual_loss_processed],
cn.gain_dir: [cn.pattern_gain],
cn.WHRC_biomass_2000_non_mang_non_planted_dir:
[cn.pattern_WHRC_biomass_2000_non_mang_non_planted],
cn.planted_forest_type_unmasked_dir:
[cn.pattern_planted_forest_type_unmasked],
cn.mangrove_biomass_2000_dir: [cn.pattern_mangrove_biomass_2000],
cn.Brazil_forest_extent_2000_processed_dir:
[cn.pattern_Brazil_forest_extent_2000_processed]
}
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(sensit_type,
master_output_dir_list)
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list)
output_pattern = stage_output_pattern_list[2]
# This configuration of the multiprocessing call is necessary for passing multiple arguments to the main function
# It is based on the example here: http://spencerimp.blogspot.com/2015/12/python-multiprocess-with-multiple.html
# With processes=30, peak usage was about 350 GB using WHRC AGB.
# processes=26 maxes out above 480 GB for biomass_swap, so better to use fewer than that.
pool = multiprocessing.Pool(int(cn.count / 2))
pool.map(
partial(legal_AMZ_loss.legal_Amazon_forest_age_category,
sensit_type=sensit_type,
output_pattern=output_pattern), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
#
# legal_AMZ_loss.legal_Amazon_forest_age_category(tile_id, sensit_type, output_pattern)
# Uploads output from this stage
uu.upload_final_set(stage_output_dir_list[2],
stage_output_pattern_list[2])
# Creates tiles of the number of years of removals
if 'gain_year_count' in actual_stages:
uu.print_log('Creating gain year count tiles for natural forest')
# Files to download for this script.
download_dict = {
cn.Brazil_annual_loss_processed_dir:
[cn.pattern_Brazil_annual_loss_processed],
cn.gain_dir: [cn.pattern_gain],
cn.WHRC_biomass_2000_non_mang_non_planted_dir:
[cn.pattern_WHRC_biomass_2000_non_mang_non_planted],
cn.planted_forest_type_unmasked_dir:
[cn.pattern_planted_forest_type_unmasked],
cn.mangrove_biomass_2000_dir: [cn.pattern_mangrove_biomass_2000],
cn.Brazil_forest_extent_2000_processed_dir:
[cn.pattern_Brazil_forest_extent_2000_processed]
}
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(sensit_type,
master_output_dir_list)
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list)
output_pattern = stage_output_pattern_list[3]
pool = multiprocessing.Pool(int(cn.count / 3))
pool.map(
partial(
legal_AMZ_loss.legal_Amazon_create_gain_year_count_loss_only,
sensit_type=sensit_type), tile_id_list)
pool.map(
partial(
legal_AMZ_loss.legal_Amazon_create_gain_year_count_no_change,
sensit_type=sensit_type), tile_id_list)
pool.map(
partial(legal_AMZ_loss.
legal_Amazon_create_gain_year_count_loss_and_gain_standard,
sensit_type=sensit_type), tile_id_list)
pool = multiprocessing.Pool(
int(cn.count / 8)
) # count/5 uses more than 160GB of memory. count/8 uses about 120GB of memory.
pool.map(
partial(legal_AMZ_loss.legal_Amazon_create_gain_year_count_merge,
output_pattern=output_pattern), tile_id_list)
# # For single processor use
# for tile_id in tile_id_list:
# legal_AMZ_loss.legal_Amazon_create_gain_year_count_loss_only(tile_id, sensit_type)
#
# for tile_id in tile_id_list:
# legal_AMZ_loss.legal_Amazon_create_gain_year_count_no_change(tile_id, sensit_type)
#
# for tile_id in tile_id_list:
# legal_AMZ_loss.legal_Amazon_create_gain_year_count_loss_and_gain_standard(tile_id, sensit_type)
#
# for tile_id in tile_id_list:
# legal_AMZ_loss.legal_Amazon_create_gain_year_count_merge(tile_id, output_pattern)
# Intermediate output tiles for checking outputs
uu.upload_final_set(stage_output_dir_list[3], "growth_years_loss_only")
uu.upload_final_set(stage_output_dir_list[3], "growth_years_gain_only")
uu.upload_final_set(stage_output_dir_list[3], "growth_years_no_change")
uu.upload_final_set(stage_output_dir_list[3],
"growth_years_loss_and_gain")
# Uploads output from this stage
uu.upload_final_set(stage_output_dir_list[3],
stage_output_pattern_list[3])
# Creates tiles of annual AGB and BGB gain rate for non-mangrove, non-planted forest using the standard model
# removal function
if 'annual_removals' in actual_stages:
uu.print_log('Creating annual removals for natural forest')
# Files to download for this script.
download_dict = {
cn.age_cat_IPCC_dir: [cn.pattern_age_cat_IPCC],
cn.cont_eco_dir: [cn.pattern_cont_eco_processed],
cn.plant_pre_2000_processed_dir: [cn.pattern_plant_pre_2000]
}
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# If the model run isn't the standard one, the output directory and file names are changed.
# This adapts just the relevant items in the output directory and pattern lists (annual removals).
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(sensit_type,
master_output_dir_list[4:6])
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list[4:6])
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# Table with IPCC Table 4.9 default gain rates
cmd = [
'aws', 's3', 'cp',
os.path.join(cn.gain_spreadsheet_dir, cn.gain_spreadsheet),
cn.docker_base_dir
]
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
pd.options.mode.chained_assignment = None
# Imports the table with the ecozone-continent codes and the carbon gain rates
gain_table = pd.read_excel(
"{}".format(cn.gain_spreadsheet),
sheet_name="natrl fores gain, for std model")
# Removes rows with duplicate codes (N. and S. America for the same ecozone)
gain_table_simplified = gain_table.drop_duplicates(subset='gainEcoCon',
keep='first')
# Converts gain table from wide to long, so each continent-ecozone-age category has its own row
gain_table_cont_eco_age = pd.melt(gain_table_simplified,
id_vars=['gainEcoCon'],
value_vars=[
'growth_primary',
'growth_secondary_greater_20',
'growth_secondary_less_20'
])
gain_table_cont_eco_age = gain_table_cont_eco_age.dropna()
# Creates a table that has just the continent-ecozone combinations for adding to the dictionary.
# These will be used whenever there is just a continent-ecozone pixel without a forest age pixel.
# Assigns removal rate of 0 when there's no age category.
gain_table_con_eco_only = gain_table_cont_eco_age
gain_table_con_eco_only = gain_table_con_eco_only.drop_duplicates(
subset='gainEcoCon', keep='first')
gain_table_con_eco_only['value'] = 0
gain_table_con_eco_only['cont_eco_age'] = gain_table_con_eco_only[
'gainEcoCon']
# Creates a code for each age category so that each continent-ecozone-age combo can have its own unique value
age_dict = {
'growth_primary': 10000,
'growth_secondary_greater_20': 20000,
'growth_secondary_less_20': 30000
}
# Creates a unique value for each continent-ecozone-age category
gain_table_cont_eco_age = gain_table_cont_eco_age.replace(
{"variable": age_dict})
gain_table_cont_eco_age['cont_eco_age'] = gain_table_cont_eco_age[
'gainEcoCon'] + gain_table_cont_eco_age['variable']
# Merges the table of just continent-ecozone codes and the table of continent-ecozone-age codes
gain_table_all_combos = pd.concat(
[gain_table_con_eco_only, gain_table_cont_eco_age])
# Converts the continent-ecozone-age codes and corresponding gain rates to a dictionary
gain_table_dict = pd.Series(
gain_table_all_combos.value.values,
index=gain_table_all_combos.cont_eco_age).to_dict()
# Adds a dictionary entry for where the ecozone-continent-age code is 0 (not in a continent)
gain_table_dict[0] = 0
# Adds a dictionary entry for each forest age code for pixels that have forest age but no continent-ecozone
for key, value in age_dict.items():
gain_table_dict[value] = 0
# Converts all the keys (continent-ecozone-age codes) to float type
gain_table_dict = {
float(key): value
for key, value in gain_table_dict.items()
}
uu.print_log(gain_table_dict)
# This configuration of the multiprocessing call is necessary for passing multiple arguments to the main function
# It is based on the example here: http://spencerimp.blogspot.com/2015/12/python-multiprocess-with-multiple.html
# processes=24 peaks at about 440 GB of memory on an r4.16xlarge machine
output_pattern_list = stage_output_pattern_list
pool = multiprocessing.Pool(int(cn.count / 2))
pool.map(
partial(annual_gain_rate_natrl_forest.annual_gain_rate,
sensit_type=sensit_type,
gain_table_dict=gain_table_dict,
output_pattern_list=output_pattern_list), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile in tile_id_list:
#
# annual_gain_rate_natrl_forest.annual_gain_rate(tile, sensit_type, gain_table_dict, stage_output_pattern_list)
# Uploads outputs from this stage
for i in range(0, len(stage_output_dir_list)):
uu.upload_final_set(stage_output_dir_list[i],
stage_output_pattern_list[i])
# Creates tiles of cumulative AGCO2 and BGCO2 gain rate for non-mangrove, non-planted forest using the standard model
# removal function
if 'cumulative_removals' in actual_stages:
uu.print_log('Creating cumulative removals for natural forest')
# Files to download for this script.
download_dict = {
cn.annual_gain_AGB_IPCC_defaults_dir:
[cn.pattern_annual_gain_AGB_IPCC_defaults],
cn.annual_gain_BGB_natrl_forest_dir:
[cn.pattern_annual_gain_BGB_natrl_forest],
cn.gain_year_count_natrl_forest_dir:
[cn.pattern_gain_year_count_natrl_forest]
}
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# If the model run isn't the standard one, the output directory and file names are changed.
# This adapts just the relevant items in the output directory and pattern lists (cumulative removals).
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(sensit_type,
master_output_dir_list[6:8])
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list[6:8])
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# Calculates cumulative aboveground carbon gain in non-mangrove planted forests
output_pattern_list = stage_output_pattern_list
pool = multiprocessing.Pool(int(cn.count / 3))
pool.map(
partial(cumulative_gain_natrl_forest.cumulative_gain_AGCO2,
output_pattern_list=output_pattern_list,
sensit_type=sensit_type), tile_id_list)
# Calculates cumulative belowground carbon gain in non-mangrove planted forests
pool = multiprocessing.Pool(int(cn.count / 3))
pool.map(
partial(cumulative_gain_natrl_forest.cumulative_gain_BGCO2,
output_pattern_list=output_pattern_list,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# cumulative_gain_natrl_forest.cumulative_gain_AGCO2(tile_id, stage_output_pattern_list[0], sensit_type)
#
# for tile_id in tile_id_list:
# cumulative_gain_natrl_forest.cumulative_gain_BGCO2(tile_id, stage_output_pattern_list[1], sensit_type)
# Uploads outputs from this stage
for i in range(0, len(stage_output_dir_list)):
uu.upload_final_set(stage_output_dir_list[i],
stage_output_pattern_list[i])
# Creates tiles of annual gain rate and cumulative removals for all forest types (above + belowground)
if 'removals_merged' in actual_stages:
uu.print_log(
'Creating annual and cumulative removals for all forest types combined (above + belowground)'
)
# Files to download for this script
download_dict = {
cn.annual_gain_AGB_mangrove_dir:
[cn.pattern_annual_gain_AGB_mangrove],
cn.annual_gain_AGB_planted_forest_non_mangrove_dir:
[cn.pattern_annual_gain_AGB_planted_forest_non_mangrove],
cn.annual_gain_AGB_IPCC_defaults_dir:
[cn.pattern_annual_gain_AGB_IPCC_defaults],
cn.annual_gain_BGB_mangrove_dir:
[cn.pattern_annual_gain_BGB_mangrove],
cn.annual_gain_BGB_planted_forest_non_mangrove_dir:
[cn.pattern_annual_gain_BGB_planted_forest_non_mangrove],
cn.annual_gain_BGB_natrl_forest_dir:
[cn.pattern_annual_gain_BGB_natrl_forest],
cn.cumul_gain_AGCO2_mangrove_dir:
[cn.pattern_cumul_gain_AGCO2_mangrove],
cn.cumul_gain_AGCO2_planted_forest_non_mangrove_dir:
[cn.pattern_cumul_gain_AGCO2_planted_forest_non_mangrove],
cn.cumul_gain_AGCO2_natrl_forest_dir:
[cn.pattern_cumul_gain_AGCO2_natrl_forest],
cn.cumul_gain_BGCO2_mangrove_dir:
[cn.pattern_cumul_gain_BGCO2_mangrove],
cn.cumul_gain_BGCO2_planted_forest_non_mangrove_dir:
[cn.pattern_cumul_gain_BGCO2_planted_forest_non_mangrove],
cn.cumul_gain_BGCO2_natrl_forest_dir:
[cn.pattern_cumul_gain_BGCO2_natrl_forest]
}
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
# If the model run isn't the standard one, the output directory and file names are changed.
# This adapts just the relevant items in the output directory and pattern lists (cumulative removals).
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(sensit_type,
master_output_dir_list[8:10])
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list[8:10])
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# For multiprocessing
output_pattern_list = stage_output_pattern_list
pool = multiprocessing.Pool(int(cn.count / 3))
pool.map(
partial(merge_cumulative_annual_gain_all_forest_types.gain_merge,
output_pattern_list=output_pattern_list,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# merge_cumulative_annual_gain_all_forest_types.gain_merge(tile_id, output_pattern_list, sensit_type)
# Uploads output tiles to s3
for i in range(0, len(stage_output_dir_list)):
uu.upload_final_set(stage_output_dir_list[i],
stage_output_pattern_list[i])
# Creates carbon emitted_pools in loss year
if 'carbon_pools' in actual_stages:
uu.print_log('Creating emissions year carbon emitted_pools')
# Specifies that carbon emitted_pools are created for loss year rather than in 2000
extent = 'loss'
# Files to download for this script
download_dict = {
cn.mangrove_biomass_2000_dir: [cn.pattern_mangrove_biomass_2000],
cn.cont_eco_dir: [cn.pattern_cont_eco_processed],
cn.bor_tem_trop_processed_dir: [cn.pattern_bor_tem_trop_processed],
cn.precip_processed_dir: [cn.pattern_precip],
cn.elevation_processed_dir: [cn.pattern_elevation],
cn.soil_C_full_extent_2000_dir:
[cn.pattern_soil_C_full_extent_2000],
cn.gain_dir: [cn.pattern_gain],
cn.cumul_gain_AGCO2_mangrove_dir:
[cn.pattern_cumul_gain_AGCO2_mangrove],
cn.cumul_gain_AGCO2_planted_forest_non_mangrove_dir:
[cn.pattern_cumul_gain_AGCO2_planted_forest_non_mangrove],
cn.cumul_gain_AGCO2_natrl_forest_dir:
[cn.pattern_cumul_gain_AGCO2_natrl_forest],
cn.annual_gain_AGB_mangrove_dir:
[cn.pattern_annual_gain_AGB_mangrove],
cn.annual_gain_AGB_planted_forest_non_mangrove_dir:
[cn.pattern_annual_gain_AGB_planted_forest_non_mangrove],
cn.annual_gain_AGB_IPCC_defaults_dir:
[cn.pattern_annual_gain_AGB_IPCC_defaults]
}
# Adds the correct AGB tiles to the download dictionary depending on the model run
if sensit_type == 'biomass_swap':
download_dict[cn.JPL_processed_dir] = [
cn.pattern_JPL_unmasked_processed
]
else:
download_dict[cn.WHRC_biomass_2000_unmasked_dir] = [
cn.pattern_WHRC_biomass_2000_unmasked
]
# Adds the correct loss tile to the download dictionary depending on the model run
if sensit_type == 'legal_Amazon_loss':
download_dict[cn.Brazil_annual_loss_processed_dir] = [
cn.pattern_Brazil_annual_loss_processed
]
else:
download_dict[cn.loss_dir] = ['']
tile_id_list = uu.tile_list_s3(
cn.Brazil_forest_extent_2000_processed_dir)
# tile_id_list = ['00N_050W']
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) +
"\n")
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir,
sensit_type, tile_id_list)
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
stage_output_dir_list = uu.alter_dirs(
sensit_type, master_output_dir_list[10:16])
stage_output_pattern_list = uu.alter_patterns(
sensit_type, master_output_pattern_list[10:16])
# Table with IPCC Wetland Supplement Table 4.4 default mangrove gain rates
cmd = [
'aws', 's3', 'cp',
os.path.join(cn.gain_spreadsheet_dir, cn.gain_spreadsheet),
cn.docker_base_dir
]
# Solution for adding subprocess output to log is from https://stackoverflow.com/questions/21953835/run-subprocess-and-print-output-to-logging
process = Popen(cmd, stdout=PIPE, stderr=STDOUT)
with process.stdout:
uu.log_subprocess_output(process.stdout)
pd.options.mode.chained_assignment = None
# Imports the table with the ecozone-continent codes and the carbon gain rates
gain_table = pd.read_excel("{}".format(cn.gain_spreadsheet),
sheet_name="mangrove gain, for model")
# Removes rows with duplicate codes (N. and S. America for the same ecozone)
gain_table_simplified = gain_table.drop_duplicates(subset='gainEcoCon',
keep='first')
mang_BGB_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(
gain_table_simplified, cn.below_to_above_trop_dry_mang,
cn.below_to_above_trop_wet_mang, cn.below_to_above_subtrop_mang)
mang_deadwood_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(
gain_table_simplified, cn.deadwood_to_above_trop_dry_mang,
cn.deadwood_to_above_trop_wet_mang,
cn.deadwood_to_above_subtrop_mang)
mang_litter_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(
gain_table_simplified, cn.litter_to_above_trop_dry_mang,
cn.litter_to_above_trop_wet_mang, cn.litter_to_above_subtrop_mang)
if extent == 'loss':
uu.print_log(
"Creating tiles of emitted aboveground carbon (carbon 2000 + carbon accumulation until loss year)"
)
# 16 processors seems to use more than 460 GB-- I don't know exactly how much it uses because I stopped it at 460
# 14 processors maxes out at 410-415 GB
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[0]
pool = multiprocessing.Pool(int(cn.count / 4))
pool.map(
partial(create_carbon_pools.create_emitted_AGC,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_emitted_AGC(tile_id, stage_output_pattern_list[0], sensit_type)
uu.upload_final_set(stage_output_dir_list[0],
stage_output_pattern_list[0])
elif extent == '2000':
uu.print_log("Creating tiles of aboveground carbon in 2000")
# 16 processors seems to use more than 460 GB-- I don't know exactly how much it uses because I stopped it at 460
# 14 processors maxes out at 415 GB
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[0]
pool = multiprocessing.Pool(processes=14)
pool.map(
partial(create_carbon_pools.create_2000_AGC,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_2000_AGC(tile_id, output_pattern_list[0], sensit_type)
uu.upload_final_set(stage_output_dir_list[0],
stage_output_pattern_list[0])
else:
uu.exception_log(no_upload, "Extent argument not valid")
uu.print_log("Creating tiles of belowground carbon")
# 18 processors used between 300 and 400 GB memory, so it was okay on a r4.16xlarge spot machine
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[1]
pool = multiprocessing.Pool(int(cn.count / 2))
pool.map(
partial(create_carbon_pools.create_BGC,
mang_BGB_AGB_ratio=mang_BGB_AGB_ratio,
extent=extent,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_BGC(tile_id, mang_BGB_AGB_ratio, extent, stage_output_pattern_list[1], sensit_type)
uu.upload_final_set(stage_output_dir_list[1],
stage_output_pattern_list[1])
uu.print_log("Creating tiles of deadwood carbon")
# processes=16 maxes out at about 430 GB
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[2]
pool = multiprocessing.Pool(int(cn.count / 4))
pool.map(
partial(create_carbon_pools.create_deadwood,
mang_deadwood_AGB_ratio=mang_deadwood_AGB_ratio,
extent=extent,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_deadwood(tile_id, mang_deadwood_AGB_ratio, extent, stage_output_pattern_list[2], sensit_type)
uu.upload_final_set(stage_output_dir_list[2],
stage_output_pattern_list[2])
uu.print_log("Creating tiles of litter carbon")
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[3]
pool = multiprocessing.Pool(int(cn.count / 4))
pool.map(
partial(create_carbon_pools.create_litter,
mang_litter_AGB_ratio=mang_litter_AGB_ratio,
extent=extent,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_litter(tile_id, mang_litter_AGB_ratio, extent, stage_output_pattern_list[3], sensit_type)
uu.upload_final_set(stage_output_dir_list[3],
stage_output_pattern_list[3])
if extent == 'loss':
uu.print_log("Creating tiles of soil carbon")
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[4]
pool = multiprocessing.Pool(int(cn.count / 3))
pool.map(
partial(create_carbon_pools.create_soil,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_soil(tile_id, stage_output_pattern_list[4], sensit_type)
uu.upload_final_set(stage_output_dir_list[4],
stage_output_pattern_list[4])
elif extent == '2000':
uu.print_log("Skipping soil for 2000 carbon pool calculation")
else:
uu.exception_log(no_upload, "Extent argument not valid")
uu.print_log("Creating tiles of total carbon")
# I tried several different processor numbers for this. Ended up using 14 processors, which used about 380 GB memory
# at peak. Probably could've handled 16 processors on an r4.16xlarge machine but I didn't feel like taking the time to check.
# Creates a single filename pattern to pass to the multiprocessor call
pattern = stage_output_pattern_list[5]
pool = multiprocessing.Pool(int(cn.count / 4))
pool.map(
partial(create_carbon_pools.create_total_C,
extent=extent,
pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_total_C(tile_id, extent, stage_output_pattern_list[5], sensit_type)
uu.upload_final_set(stage_output_dir_list[5],
stage_output_pattern_list[5])
def main():
os.chdir(cn.docker_base_dir)
# List of possible model stages to run (not including mangrove and planted forest stages)
model_stages = [
'all', 'model_extent', 'forest_age_category_IPCC',
'annual_removals_IPCC', 'annual_removals_all_forest_types',
'gain_year_count', 'gross_removals_all_forest_types', 'carbon_pools',
'gross_emissions', 'net_flux', 'aggregate'
]
# The argument for what kind of model run is being done: standard conditions or a sensitivity analysis run
parser = argparse.ArgumentParser(
description='Run the full carbon flux model')
parser.add_argument('--model-type',
'-t',
required=True,
help='{}'.format(cn.model_type_arg_help))
parser.add_argument(
'--stages',
'-s',
required=True,
help='Stages for running the flux model. Options are {}'.format(
model_stages))
parser.add_argument(
'--run-through',
'-r',
required=True,
help=
'Options: true or false. true: run named stage and following stages. false: run only named stage.'
)
parser.add_argument('--run-date',
'-d',
required=False,
help='Date of run. Must be format YYYYMMDD.')
parser.add_argument(
'--tile-id-list',
'-l',
required=True,
help=
'List of tile ids to use in the model. Should be of form 00N_110E or 00N_110E,00N_120E or all.'
)
parser.add_argument(
'--carbon-pool-extent',
'-ce',
required=False,
help=
'Time period for which carbon emitted_pools should be calculated: loss, 2000, loss,2000, or 2000,loss'
)
parser.add_argument(
'--emitted-pools-to-use',
'-p',
required=False,
help=
'Options are soil_only or biomass_soil. Former only considers emissions from soil. Latter considers emissions from biomass and soil.'
)
parser.add_argument(
'--tcd-threshold',
'-tcd',
required=False,
help=
'Tree cover density threshold above which pixels will be included in the aggregation.'
)
parser.add_argument(
'--std-net-flux-aggreg',
'-sagg',
required=False,
help=
'The s3 standard model net flux aggregated tif, for comparison with the sensitivity analysis map'
)
parser.add_argument(
'--mangroves',
'-ma',
required=False,
help=
'Include mangrove removal rate and standard deviation tile creation step (before model extent). true or false.'
)
parser.add_argument(
'--us-rates',
'-us',
required=False,
help=
'Include US removal rate and standard deviation tile creation step (before model extent). true or false.'
)
parser.add_argument(
'--per-pixel-results',
'-ppr',
required=False,
help=
'Include per pixel result calculations for gross emissions (all gases, all pools), gross removals, and net flux. true or false.'
)
parser.add_argument('--log-note',
'-ln',
required=False,
help='Note to include in log header about model run.')
args = parser.parse_args()
sensit_type = args.model_type
stage_input = args.stages
run_through = args.run_through
run_date = args.run_date
tile_id_list = args.tile_id_list
carbon_pool_extent = args.carbon_pool_extent
emitted_pools = args.emitted_pools_to_use
thresh = args.tcd_threshold
if thresh is not None:
thresh = int(thresh)
std_net_flux = args.std_net_flux_aggreg
include_mangroves = args.mangroves
include_us = args.us_rates
include_per_pixel = args.per_pixel_results
log_note = args.log_note
# Start time for script
script_start = datetime.datetime.now()
# Create the output log
uu.initiate_log(tile_id_list=tile_id_list,
sensit_type=sensit_type,
run_date=run_date,
stage_input=stage_input,
run_through=run_through,
carbon_pool_extent=carbon_pool_extent,
emitted_pools=emitted_pools,
thresh=thresh,
std_net_flux=std_net_flux,
include_mangroves=include_mangroves,
include_us=include_us,
include_per_pixel=include_per_pixel,
log_note=log_note)
# Checks the validity of the model stage arguments. If either one is invalid, the script ends.
if (stage_input not in model_stages):
uu.exception_log(
'Invalid stage selection. Please provide a stage from',
model_stages)
else:
pass
if (run_through not in ['true', 'false']):
uu.exception_log(
'Invalid run through option. Please enter true or false.')
else:
pass
# Generates the list of stages to run
actual_stages = uu.analysis_stages(model_stages,
stage_input,
run_through,
include_mangroves=include_mangroves,
include_us=include_us,
include_per_pixel=include_per_pixel)
uu.print_log("Analysis stages to run:", actual_stages)
# Reports how much storage is being used with files
uu.check_storage()
# Checks whether the sensitivity analysis argument is valid
uu.check_sensit_type(sensit_type)
# Checks if the carbon pool type is specified if the stages to run includes carbon pool generation.
# Does this up front so the user knows before the run begins that information is missing.
if ('carbon_pools' in actual_stages) & (carbon_pool_extent not in [
'loss', '2000', 'loss,2000', '2000,loss'
]):
uu.exception_log(
"Invalid carbon_pool_extent input. Please choose loss, 2000, loss,2000 or 2000,loss."
)
# Checks if the correct c++ script has been compiled for the pool option selected.
# Does this up front so that the user is prompted to compile the C++ before the script starts running, if necessary.
if 'gross_emissions' in actual_stages:
if emitted_pools == 'biomass_soil':
# Some sensitivity analyses have specific gross emissions scripts.
# The rest of the sensitivity analyses and the standard model can all use the same, generic gross emissions script.
if sensit_type in ['no_shifting_ag', 'convert_to_grassland']:
if os.path.exists('{0}/calc_gross_emissions_{1}.exe'.format(
cn.c_emis_compile_dst, sensit_type)):
uu.print_log(
"C++ for {} already compiled.".format(sensit_type))
else:
uu.exception_log(
'Must compile standard {} model C++...'.format(
sensit_type))
else:
if os.path.exists(
'{0}/calc_gross_emissions_generic.exe'.format(
cn.c_emis_compile_dst)):
uu.print_log("C++ for generic emissions already compiled.")
else:
uu.exception_log('Must compile generic emissions C++...')
elif (emitted_pools == 'soil_only') & (sensit_type == 'std'):
if os.path.exists('{0}/calc_gross_emissions_soil_only.exe'.format(
cn.c_emis_compile_dst)):
uu.print_log("C++ for generic emissions already compiled.")
else:
uu.exception_log('Must compile soil_only C++...')
else:
uu.exception_log(
'Pool and/or sensitivity analysis option not valid for gross emissions'
)
# Checks whether the canopy cover argument is valid up front.
if 'aggregate' in actual_stages:
if thresh < 0 or thresh > 99:
uu.exception_log(
'Invalid tcd. Please provide an integer between 0 and 99.')
else:
pass
# If the tile_list argument is an s3 folder, the list of tiles in it is created
if 's3://' in tile_id_list:
tile_id_list = uu.tile_list_s3(tile_id_list, 'std')
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))),
"\n")
# Otherwise, check that the tile list argument is valid. "all" is the way to specify that all tiles should be processed
else:
tile_id_list = uu.tile_id_list_check(tile_id_list)
# List of output directories and output file name patterns.
# The directory list is only used for counting tiles in output folders at the end of the model
output_dir_list = [
cn.model_extent_dir, cn.age_cat_IPCC_dir,
cn.annual_gain_AGB_IPCC_defaults_dir,
cn.annual_gain_BGB_IPCC_defaults_dir,
cn.stdev_annual_gain_AGB_IPCC_defaults_dir, cn.removal_forest_type_dir,
cn.annual_gain_AGC_all_types_dir, cn.annual_gain_BGC_all_types_dir,
cn.annual_gain_AGC_BGC_all_types_dir,
cn.stdev_annual_gain_AGC_all_types_dir, cn.gain_year_count_dir,
cn.cumul_gain_AGCO2_all_types_dir, cn.cumul_gain_BGCO2_all_types_dir,
cn.cumul_gain_AGCO2_BGCO2_all_types_dir
]
# Prepends the mangrove and US output directories if mangroves are included
if 'annual_removals_mangrove' in actual_stages:
output_dir_list = [
cn.annual_gain_AGB_mangrove_dir, cn.annual_gain_BGB_mangrove_dir,
cn.stdev_annual_gain_AGB_mangrove_dir
] + output_dir_list
if 'annual_removals_us' in actual_stages:
output_dir_list = [
cn.annual_gain_AGC_BGC_natrl_forest_US_dir,
cn.stdev_annual_gain_AGC_BGC_natrl_forest_US_dir
] + output_dir_list
# Adds the carbon directories depending on which carbon emitted_pools are being generated: 2000 and/or emissions year
if 'carbon_pools' in actual_stages:
if 'loss' in carbon_pool_extent:
output_dir_list = output_dir_list + [
cn.AGC_emis_year_dir, cn.BGC_emis_year_dir,
cn.deadwood_emis_year_2000_dir, cn.litter_emis_year_2000_dir,
cn.soil_C_emis_year_2000_dir, cn.total_C_emis_year_dir
]
if '2000' in carbon_pool_extent:
output_dir_list = output_dir_list + [
cn.AGC_2000_dir, cn.BGC_2000_dir, cn.deadwood_2000_dir,
cn.litter_2000_dir, cn.soil_C_full_extent_2000_dir,
cn.total_C_2000_dir
]
# Adds the biomass_soil output directories or the soil_only output directories depending on the model run
if 'gross_emissions' in actual_stages:
if emitted_pools == 'biomass_soil':
output_dir_list = output_dir_list + [
cn.gross_emis_commod_biomass_soil_dir,
cn.gross_emis_shifting_ag_biomass_soil_dir,
cn.gross_emis_forestry_biomass_soil_dir,
cn.gross_emis_wildfire_biomass_soil_dir,
cn.gross_emis_urban_biomass_soil_dir,
cn.gross_emis_no_driver_biomass_soil_dir,
cn.gross_emis_all_gases_all_drivers_biomass_soil_dir,
cn.gross_emis_co2_only_all_drivers_biomass_soil_dir,
cn.gross_emis_non_co2_all_drivers_biomass_soil_dir,
cn.gross_emis_nodes_biomass_soil_dir
]
else:
output_dir_list = output_dir_list + [
cn.gross_emis_commod_soil_only_dir,
cn.gross_emis_shifting_ag_soil_only_dir,
cn.gross_emis_forestry_soil_only_dir,
cn.gross_emis_wildfire_soil_only_dir,
cn.gross_emis_urban_soil_only_dir,
cn.gross_emis_no_driver_soil_only_dir,
cn.gross_emis_all_gases_all_drivers_soil_only_dir,
cn.gross_emis_co2_only_all_drivers_soil_only_dir,
cn.gross_emis_non_co2_all_drivers_soil_only_dir,
cn.gross_emis_nodes_soil_only_dir
]
output_dir_list = output_dir_list + [
cn.net_flux_dir, cn.cumul_gain_AGCO2_BGCO2_all_types_per_pixel_dir,
cn.gross_emis_all_gases_all_drivers_biomass_soil_per_pixel_dir,
cn.net_flux_per_pixel_dir
]
# Output patterns aren't actually used in the script-- here just for reference.
output_pattern_list = [
cn.pattern_model_extent, cn.pattern_age_cat_IPCC,
cn.pattern_annual_gain_AGB_IPCC_defaults,
cn.pattern_annual_gain_BGB_IPCC_defaults,
cn.pattern_stdev_annual_gain_AGB_IPCC_defaults,
cn.pattern_removal_forest_type, cn.pattern_annual_gain_AGC_all_types,
cn.pattern_annual_gain_BGC_all_types,
cn.pattern_annual_gain_AGC_BGC_all_types,
cn.pattern_stdev_annual_gain_AGC_all_types, cn.pattern_gain_year_count,
cn.pattern_cumul_gain_AGCO2_all_types,
cn.pattern_cumul_gain_BGCO2_all_types,
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types
]
# Prepends the mangrove and US output pattern if mangroves are included
if 'annual_removals_mangrove' in actual_stages:
output_pattern_list = [
cn.pattern_annual_gain_AGB_mangrove,
cn.pattern_annual_gain_BGB_mangrove,
cn.pattern_stdev_annual_gain_AGB_mangrove
] + output_pattern_list
if 'annual_removals_us' in actual_stages:
output_pattern_list = [
cn.pattern_annual_gain_AGC_BGC_natrl_forest_US,
cn.pattern_stdev_annual_gain_AGC_BGC_natrl_forest_US
] + output_pattern_list
# Adds the soil carbon patterns depending on which carbon emitted_pools are being generated: 2000 and/or emissions year
if 'carbon_pools' in actual_stages:
if 'loss' in carbon_pool_extent:
output_pattern_list = output_pattern_list + [
cn.pattern_AGC_emis_year, cn.pattern_BGC_emis_year,
cn.pattern_deadwood_emis_year_2000,
cn.pattern_litter_emis_year_2000,
cn.pattern_soil_C_emis_year_2000, cn.pattern_total_C_emis_year
]
if '2000' in carbon_pool_extent:
output_pattern_list = output_pattern_list + [
cn.pattern_AGC_2000, cn.pattern_BGC_2000,
cn.pattern_deadwood_2000, cn.pattern_litter_2000,
cn.pattern_soil_C_full_extent_2000, cn.pattern_total_C_2000
]
# Adds the biomass_soil output patterns or the soil_only output directories depending on the model run
if 'gross_emissions' in actual_stages:
if emitted_pools == 'biomass_soil':
output_pattern_list = output_pattern_list + [
cn.pattern_gross_emis_commod_biomass_soil,
cn.pattern_gross_emis_shifting_ag_biomass_soil,
cn.pattern_gross_emis_forestry_biomass_soil,
cn.pattern_gross_emis_wildfire_biomass_soil,
cn.pattern_gross_emis_urban_biomass_soil,
cn.pattern_gross_emis_no_driver_biomass_soil,
cn.pattern_gross_emis_co2_only_all_drivers_biomass_soil,
cn.pattern_gross_emis_non_co2_all_drivers_biomass_soil,
cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil
]
else:
output_pattern_list = output_pattern_list + [
cn.pattern_gross_emis_commod_soil_only,
cn.pattern_gross_emis_shifting_ag_soil_only,
cn.pattern_gross_emis_forestry_soil_only,
cn.pattern_gross_emis_wildfire_soil_only,
cn.pattern_gross_emis_urban_soil_only,
cn.pattern_gross_emis_no_driver_soil_only,
cn.pattern_gross_emis_all_gases_all_drivers_soil_only,
cn.pattern_gross_emis_co2_only_all_drivers_soil_only,
cn.pattern_gross_emis_non_co2_all_drivers_soil_only,
cn.pattern_gross_emis_nodes_soil_only
]
output_pattern_list = output_pattern_list + [
cn.pattern_net_flux,
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types_per_pixel,
cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil_per_pixel,
cn.pattern_net_flux_per_pixel
]
# Creates tiles of annual AGB and BGB gain rate and AGB stdev for mangroves using the standard model
# removal function
if 'annual_removals_mangrove' in actual_stages:
uu.print_log(":::::Creating tiles of annual removals for mangrove")
start = datetime.datetime.now()
mp_annual_gain_rate_mangrove(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for annual_gain_rate_mangrove:",
elapsed_time, "\n")
# Creates tiles of annual AGC+BGC gain rate and AGC stdev for US-specific removals using the standard model
# removal function
if 'annual_removals_us' in actual_stages:
uu.print_log(":::::Creating tiles of annual removals for US")
start = datetime.datetime.now()
mp_US_removal_rates(sensit_type, tile_id_list, run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for annual_gain_rate_us:",
elapsed_time, "\n")
# Creates model extent tiles
if 'model_extent' in actual_stages:
uu.print_log(":::::Creating tiles of model extent")
start = datetime.datetime.now()
mp_model_extent(sensit_type, tile_id_list, run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for model_extent:", elapsed_time,
"\n", "\n")
# Creates age category tiles for natural forests
if 'forest_age_category_IPCC' in actual_stages:
uu.print_log(
":::::Creating tiles of forest age categories for IPCC removal rates"
)
start = datetime.datetime.now()
mp_forest_age_category_IPCC(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for forest_age_category_IPCC:",
elapsed_time, "\n", "\n")
# Creates tiles of annual AGB and BGB gain rates using IPCC Table 4.9 defaults
if 'annual_removals_IPCC' in actual_stages:
uu.print_log(
":::::Creating tiles of annual aboveground and belowground removal rates using IPCC defaults"
)
start = datetime.datetime.now()
mp_annual_gain_rate_IPCC_defaults(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for annual_gain_rate_IPCC:",
elapsed_time, "\n", "\n")
# Creates tiles of annual AGC and BGC removal factors for the entire model, combining removal factors from all forest types
if 'annual_removals_all_forest_types' in actual_stages:
uu.print_log(
":::::Creating tiles of annual aboveground and belowground removal rates for all forest types"
)
start = datetime.datetime.now()
mp_annual_gain_rate_AGC_BGC_all_forest_types(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(
":::::Processing time for annual_gain_rate_AGC_BGC_all_forest_types:",
elapsed_time, "\n", "\n")
# Creates tiles of the number of years of removals for all model pixels (across all forest types)
if 'gain_year_count' in actual_stages:
uu.print_log(
":::::Freeing up memory for gain year count creation by deleting unneeded tiles"
)
tiles_to_delete = []
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_mangrove_biomass_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_WHRC_biomass_2000_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_AGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_BGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_natrl_forest_Europe)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_planted_forest_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_natrl_forest_US)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_natrl_forest_young)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_age_cat_IPCC)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_BGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_ifl_primary)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_planted_forest_type_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_plant_pre_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_natrl_forest_Europe)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_planted_forest_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_natrl_forest_US)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_natrl_forest_young)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_all_types)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log(
":::::Creating tiles of gain year count for all removal pixels")
start = datetime.datetime.now()
mp_gain_year_count_all_forest_types(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for gain_year_count:", elapsed_time,
"\n", "\n")
# Creates tiles of gross removals for all forest types (aboveground, belowground, and above+belowground)
if 'gross_removals_all_forest_types' in actual_stages:
uu.print_log(
":::::Creating gross removals for all forest types combined (above + belowground) tiles'"
)
start = datetime.datetime.now()
mp_gross_removals_all_forest_types(sensit_type,
tile_id_list,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(
":::::Processing time for gross_removals_all_forest_types:",
elapsed_time, "\n", "\n")
# Creates carbon emitted_pools in loss year
if 'carbon_pools' in actual_stages:
uu.print_log(
":::::Freeing up memory for carbon pool creation by deleting unneeded tiles"
)
tiles_to_delete = []
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_model_extent)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_AGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_BGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_natrl_forest_Europe)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_planted_forest_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_natrl_forest_US)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_natrl_forest_young)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_age_cat_IPCC)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_BGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_BGC_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_annual_gain_AGC_BGC_all_types)))
tiles_to_delete.extend(glob.glob('*growth_years*tif'))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_gain_year_count)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_cumul_gain_BGCO2_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_cumul_gain_AGCO2_BGCO2_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_ifl_primary)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_planted_forest_type_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_plant_pre_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGB_mangrove)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_natrl_forest_Europe)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_planted_forest_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_BGC_natrl_forest_US)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_natrl_forest_young)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGB_IPCC_defaults)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_stdev_annual_gain_AGC_all_types)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log(":::::Creating carbon pool tiles")
start = datetime.datetime.now()
mp_create_carbon_pools(sensit_type,
tile_id_list,
carbon_pool_extent,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for create_carbon_pools:",
elapsed_time, "\n", "\n")
# Creates gross emissions tiles by driver, gas, and all emissions combined
if 'gross_emissions' in actual_stages:
uu.print_log(
":::::Freeing up memory for gross emissions creation by deleting unneeded tiles"
)
tiles_to_delete = []
# tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_removal_forest_type)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(
cn.pattern_AGC_2000)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(
cn.pattern_BGC_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_deadwood_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_litter_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_total_C_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_elevation)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_precip)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_annual_gain_AGC_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_cumul_gain_AGCO2_all_types)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_cont_eco_processed)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_WHRC_biomass_2000_unmasked)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_mangrove_biomass_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_removal_forest_type)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
uu.print_log(tiles_to_delete)
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log(":::::Creating gross emissions tiles")
start = datetime.datetime.now()
mp_calculate_gross_emissions(sensit_type,
tile_id_list,
emitted_pools,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for gross_emissions:", elapsed_time,
"\n", "\n")
# Creates net flux tiles (gross emissions - gross removals)
if 'net_flux' in actual_stages:
uu.print_log(
":::::Freeing up memory for net flux creation by deleting unneeded tiles"
)
tiles_to_delete = []
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_loss)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_non_co2_all_drivers_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_co2_only_all_drivers_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_commod_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_shifting_ag_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_forestry_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_wildfire_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_urban_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_no_driver_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_gross_emis_nodes_biomass_soil)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_AGC_emis_year)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_BGC_emis_year)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_deadwood_emis_year_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_litter_emis_year_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_soil_C_emis_year_2000)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_total_C_emis_year)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_peat_mask)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_ifl_primary)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(
cn.pattern_planted_forest_type_unmasked)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_drivers)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_climate_zone)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_bor_tem_trop_processed)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_burn_year)))
tiles_to_delete.extend(
glob.glob('*{}*tif'.format(cn.pattern_plant_pre_2000)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log(":::::Creating net flux tiles")
start = datetime.datetime.now()
mp_net_flux(sensit_type, tile_id_list, run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for net_flux:", elapsed_time, "\n",
"\n")
# Aggregates gross emissions, gross removals, and net flux to coarser resolution.
# For sensitivity analyses, creates percent difference and sign change maps compared to standard model net flux.
if 'aggregate' in actual_stages:
uu.print_log(":::::Creating 4x4 km aggregate maps")
start = datetime.datetime.now()
mp_aggregate_results_to_4_km(sensit_type,
thresh,
tile_id_list,
std_net_flux=std_net_flux,
run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for aggregate:", elapsed_time, "\n",
"\n")
# Converts gross emissions, gross removals and net flux from per hectare rasters to per pixel rasters
if 'per_pixel_results' in actual_stages:
uu.print_log(":::::Creating per pixel versions of main model outputs")
start = datetime.datetime.now()
mp_output_per_pixel(sensit_type, tile_id_list, run_date=run_date)
end = datetime.datetime.now()
elapsed_time = end - start
uu.check_storage()
uu.print_log(":::::Processing time for per pixel raster creation:",
elapsed_time, "\n", "\n")
uu.print_log(":::::Counting tiles output to each folder")
# Modifies output directory names to make them match those used during the model run.
# The tiles in each of these directories and counted and logged.
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log(
"Modifying output directory and file name pattern based on sensitivity analysis"
)
output_dir_list = uu.alter_dirs(sensit_type, output_dir_list)
# Changes the date in the output directories. This date was used during the model run.
# This replaces the date in constants_and_names.
if run_date:
output_dir_list = uu.replace_output_dir_date(output_dir_list, run_date)
for output in output_dir_list:
tile_count = uu.count_tiles_s3(output)
uu.print_log("Total tiles in", output, ": ", tile_count)
script_end = datetime.datetime.now()
script_elapsed_time = script_end - script_start
uu.print_log(":::::Processing time for entire run:", script_elapsed_time,
"\n")
def mp_aggregate_results_to_4_km(sensit_type,
thresh,
tile_id_list,
std_net_flux=None,
run_date=None,
no_upload=None):
os.chdir(cn.docker_base_dir)
# If a full model run is specified, the correct set of tiles for the particular script is listed
if tile_id_list == 'all':
# List of tiles to run in the model
tile_id_list = uu.tile_list_s3(cn.net_flux_dir, sensit_type)
uu.print_log(tile_id_list)
uu.print_log(
"There are {} tiles to process".format(str(len(tile_id_list))) + "\n")
# Files to download for this script
download_dict = {
cn.annual_gain_AGC_all_types_dir:
[cn.pattern_annual_gain_AGC_all_types],
cn.cumul_gain_AGCO2_BGCO2_all_types_dir:
[cn.pattern_cumul_gain_AGCO2_BGCO2_all_types],
cn.gross_emis_all_gases_all_drivers_biomass_soil_dir:
[cn.pattern_gross_emis_all_gases_all_drivers_biomass_soil],
cn.net_flux_dir: [cn.pattern_net_flux]
}
# Checks whether the canopy cover argument is valid
if thresh < 0 or thresh > 99:
uu.exception_log(
no_upload,
'Invalid tcd. Please provide an integer between 0 and 99.')
if uu.check_aws_creds():
# Pixel area tiles-- necessary for calculating sum of pixels for any set of tiles
uu.s3_flexible_download(cn.pixel_area_dir, cn.pattern_pixel_area,
cn.docker_base_dir, sensit_type, tile_id_list)
# Tree cover density, Hansen gain, and mangrove biomass tiles-- necessary for filtering sums to model extent
uu.s3_flexible_download(cn.tcd_dir, cn.pattern_tcd, cn.docker_base_dir,
sensit_type, tile_id_list)
uu.s3_flexible_download(cn.gain_dir, cn.pattern_gain,
cn.docker_base_dir, sensit_type, tile_id_list)
uu.s3_flexible_download(cn.mangrove_biomass_2000_dir,
cn.pattern_mangrove_biomass_2000,
cn.docker_base_dir, sensit_type, tile_id_list)
uu.print_log("Model outputs to process are:", download_dict)
# List of output directories. Modified later for sensitivity analysis.
# Output pattern is determined later.
output_dir_list = [cn.output_aggreg_dir]
# If the model run isn't the standard one, the output directory is changed
if sensit_type != 'std':
uu.print_log(
"Changing output directory and file name pattern based on sensitivity analysis"
)
output_dir_list = uu.alter_dirs(sensit_type, output_dir_list)
# A date can optionally be provided by the full model script or a run of this script.
# This replaces the date in constants_and_names.
if run_date is not None:
output_dir_list = uu.replace_output_dir_date(output_dir_list, run_date)
# Iterates through the types of tiles to be processed
for dir, download_pattern in list(download_dict.items()):
download_pattern_name = download_pattern[0]
# Downloads input files or entire directories, depending on how many tiles are in the tile_id_list, if AWS credentials are found
if uu.check_aws_creds():
uu.s3_flexible_download(dir, download_pattern_name,
cn.docker_base_dir, sensit_type,
tile_id_list)
# Gets an actual tile id to use as a dummy in creating the actual tile pattern
local_tile_list = uu.tile_list_spot_machine(cn.docker_base_dir,
download_pattern_name)
sample_tile_id = uu.get_tile_id(local_tile_list[0])
# Renames the tiles according to the sensitivity analysis before creating dummy tiles.
# The renaming function requires a whole tile name, so this passes a dummy time name that is then stripped a few
# lines later.
tile_id = sample_tile_id # a dummy tile id (but it has to be a real tile id). It is removed later.
output_pattern = uu.sensit_tile_rename(sensit_type, tile_id,
download_pattern_name)
pattern = output_pattern[9:-4]
# For sensitivity analysis runs, only aggregates the tiles if they were created as part of the sensitivity analysis
if (sensit_type != 'std') & (sensit_type not in pattern):
uu.print_log(
"{} not a sensitivity analysis output. Skipping aggregation..."
.format(pattern))
uu.print_log("")
continue
# Lists the tiles of the particular type that is being iterates through.
# Excludes all intermediate files
tile_list = uu.tile_list_spot_machine(".", "{}.tif".format(pattern))
# from https://stackoverflow.com/questions/12666897/removing-an-item-from-list-matching-a-substring
tile_list = [i for i in tile_list if not ('hanson_2013' in i)]
tile_list = [i for i in tile_list if not ('rewindow' in i)]
tile_list = [i for i in tile_list if not ('0_4deg' in i)]
tile_list = [i for i in tile_list if not ('.ovr' in i)]
# tile_list = ['00N_070W_cumul_gain_AGCO2_BGCO2_t_ha_all_forest_types_2001_15_biomass_swap.tif'] # test tiles
uu.print_log("There are {0} tiles to process for pattern {1}".format(
str(len(tile_list)), download_pattern) + "\n")
uu.print_log("Processing:", dir, "; ", pattern)
# Converts the 10x10 degree Hansen tiles that are in windows of 40000x1 pixels to windows of 400x400 pixels,
# which is the resolution of the output tiles. This will allow the 30x30 m pixels in each window to be summed.
# For multiprocessor use. count/2 used about 400 GB of memory on an r4.16xlarge machine, so that was okay.
if cn.count == 96:
if sensit_type == 'biomass_swap':
processes = 12 # 12 processors = XXX GB peak
else:
processes = 16 # 12 processors = 140 GB peak; 16 = XXX GB peak; 20 = >750 GB (maxed out)
else:
processes = 8
uu.print_log('Rewindow max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(
partial(aggregate_results_to_4_km.rewindow, no_upload=no_upload),
tile_list)
# Added these in response to error12: Cannot allocate memory error.
# This fix was mentioned here: of https://stackoverflow.com/questions/26717120/python-cannot-allocate-memory-using-multiprocessing-pool
# Could also try this: https://stackoverflow.com/questions/42584525/python-multiprocessing-debugging-oserror-errno-12-cannot-allocate-memory
pool.close()
pool.join()
# # For single processor use
# for tile in tile_list:
#
# aggregate_results_to_4_km.rewindow(til, no_upload)
# Converts the existing (per ha) values to per pixel values (e.g., emissions/ha to emissions/pixel)
# and sums those values in each 400x400 pixel window.
# The sum for each 400x400 pixel window is stored in a 2D array, which is then converted back into a raster at
# 0.1x0.1 degree resolution (approximately 10m in the tropics).
# Each pixel in that raster is the sum of the 30m pixels converted to value/pixel (instead of value/ha).
# The 0.1x0.1 degree tile is output.
# For multiprocessor use. This used about 450 GB of memory with count/2, it's okay on an r4.16xlarge
if cn.count == 96:
if sensit_type == 'biomass_swap':
processes = 10 # 10 processors = XXX GB peak
else:
processes = 12 # 16 processors = 180 GB peak; 16 = XXX GB peak; 20 = >750 GB (maxed out)
else:
processes = 8
uu.print_log('Conversion to per pixel and aggregate max processors=',
processes)
pool = multiprocessing.Pool(processes)
pool.map(
partial(aggregate_results_to_4_km.aggregate,
thresh=thresh,
sensit_type=sensit_type,
no_upload=no_upload), tile_list)
pool.close()
pool.join()
# # For single processor use
# for tile in tile_list:
#
# aggregate_results_to_4_km.aggregate(tile, thresh, sensit_type, no_upload)
# Makes a vrt of all the output 10x10 tiles (10 km resolution)
out_vrt = "{}_0_4deg.vrt".format(pattern)
os.system('gdalbuildvrt -tr 0.04 0.04 {0} *{1}_0_4deg*.tif'.format(
out_vrt, pattern))
# Creates the output name for the 10km map
out_pattern = uu.name_aggregated_output(download_pattern_name, thresh,
sensit_type)
uu.print_log(out_pattern)
# Produces a single raster of all the 10x10 tiles (0.4 degree resolution)
cmd = [
'gdalwarp', '-t_srs', "EPSG:4326", '-overwrite', '-dstnodata', '0',
'-co', 'COMPRESS=LZW', '-tr', '0.04', '0.04', out_vrt,
'{}.tif'.format(out_pattern)
]
uu.log_subprocess_output_full(cmd)
# Adds metadata tags to output rasters
uu.add_universal_metadata_tags('{0}.tif'.format(out_pattern),
sensit_type)
# Units are different for annual removal factor, so metadata has to reflect that
if 'annual_removal_factor' in out_pattern:
cmd = [
'gdal_edit.py', '-mo',
'units=Mg aboveground carbon/yr/pixel, where pixels are 0.04x0.04 degrees',
'-mo',
'source=per hectare version of the same model output, aggregated from 0.00025x0.00025 degree pixels',
'-mo', 'extent=Global', '-mo',
'scale=negative values are removals', '-mo',
'treecover_density_threshold={0} (only model pixels with canopy cover > {0} are included in aggregation'
.format(thresh), '{0}.tif'.format(out_pattern)
]
uu.log_subprocess_output_full(cmd)
else:
cmd = [
'gdal_edit.py', '-mo',
'units=Mg CO2e/yr/pixel, where pixels are 0.04x0.04 degrees',
'-mo',
'source=per hectare version of the same model output, aggregated from 0.00025x0.00025 degree pixels',
'-mo', 'extent=Global', '-mo',
'treecover_density_threshold={0} (only model pixels with canopy cover > {0} are included in aggregation'
.format(thresh), '{0}.tif'.format(out_pattern)
]
uu.log_subprocess_output_full(cmd)
# If no_upload flag is not activated, output is uploaded
if not no_upload:
uu.print_log("Tiles processed. Uploading to s3 now...")
uu.upload_final_set(output_dir_list[0], out_pattern)
# Cleans up the folder before starting on the next raster type
vrtList = glob.glob('*vrt')
for vrt in vrtList:
os.remove(vrt)
for tile_name in tile_list:
tile_id = uu.get_tile_id(tile_name)
# os.remove('{0}_{1}.tif'.format(tile_id, pattern))
os.remove('{0}_{1}_rewindow.tif'.format(tile_id, pattern))
os.remove('{0}_{1}_0_4deg.tif'.format(tile_id, pattern))
# Compares the net flux from the standard model and the sensitivity analysis in two ways.
# This does not work for compariing the raw outputs of the biomass_swap and US_removals sensitivity models because their
# extents are different from the standard model's extent (tropics and US tiles vs. global).
# Thus, in order to do this comparison, you need to clip the standard model net flux and US_removals net flux to
# the outline of the US and clip the standard model net flux to the extent of JPL AGB2000.
# Then, manually upload the clipped US_removals and biomass_swap net flux rasters to the spot machine and the
# code below should work.
if sensit_type not in [
'std', 'biomass_swap', 'US_removals', 'legal_Amazon_loss'
]:
if std_net_flux:
uu.print_log(
"Standard aggregated flux results provided. Creating comparison maps."
)
# Copies the standard model aggregation outputs to s3. Only net flux is used, though.
uu.s3_file_download(std_net_flux, cn.docker_base_dir, sensit_type)
# Identifies the standard model net flux map
std_aggreg_flux = os.path.split(std_net_flux)[1]
try:
# Identifies the sensitivity model net flux map
sensit_aggreg_flux = glob.glob(
'net_flux_Mt_CO2e_*{}*'.format(sensit_type))[0]
uu.print_log("Standard model net flux:", std_aggreg_flux)
uu.print_log("Sensitivity model net flux:", sensit_aggreg_flux)
except:
uu.print_log(
'Cannot do comparison. One of the input flux tiles is not valid. Verify that both net flux rasters are on the spot machine.'
)
uu.print_log(
"Creating map of percent difference between standard and {} net flux"
.format(sensit_type))
aggregate_results_to_4_km.percent_diff(std_aggreg_flux,
sensit_aggreg_flux,
sensit_type, no_upload)
uu.print_log(
"Creating map of which pixels change sign and which stay the same between standard and {}"
.format(sensit_type))
aggregate_results_to_4_km.sign_change(std_aggreg_flux,
sensit_aggreg_flux,
sensit_type, no_upload)
# If no_upload flag is not activated, output is uploaded
if not no_upload:
uu.upload_final_set(output_dir_list[0],
cn.pattern_aggreg_sensit_perc_diff)
uu.upload_final_set(output_dir_list[0],
cn.pattern_aggreg_sensit_sign_change)
else:
uu.print_log(
"No standard aggregated flux results provided. Not creating comparison maps."
)
def mp_create_carbon_pools(sensit_type, tile_id_list, carbon_pool_extent, run_date = None):
os.chdir(cn.docker_base_dir)
if (sensit_type != 'std') & (carbon_pool_extent != 'loss'):
uu.exception_log("Sensitivity analysis run must use 'loss' extent")
# Checks the validity of the carbon_pool_extent argument
if (carbon_pool_extent not in ['loss', '2000', 'loss,2000', '2000,loss']):
uu.exception_log("Invalid carbon_pool_extent input. Please choose loss, 2000, loss,2000 or 2000,loss.")
# If a full model run is specified, the correct set of tiles for the particular script is listed.
# For runs generating carbon pools in emissions year, only tiles with model extent and loss are relevant.
if (tile_id_list == 'all') & (carbon_pool_extent == 'loss'):
# Lists the tiles that have both model extent and loss pixels
model_extent_tile_id_list = uu.tile_list_s3(cn.model_extent_dir, sensit_type=sensit_type)
loss_tile_id_list = uu.tile_list_s3(cn.loss_dir, sensit_type=sensit_type)
uu.print_log("Carbon pool at emissions year is combination of model_extent and loss tiles:")
tile_id_list = list(set(model_extent_tile_id_list).intersection(loss_tile_id_list))
# For runs generating carbon pools in 2000, all model extent tiles are relevant.
if (tile_id_list == 'all') & (carbon_pool_extent != 'loss'):
tile_id_list = uu.tile_list_s3(cn.model_extent_dir, sensit_type=sensit_type)
uu.print_log(tile_id_list)
uu.print_log("There are {} tiles to process".format(str(len(tile_id_list))) + "\n")
output_dir_list = []
output_pattern_list = []
# Output files and patterns and files to download if carbon emitted_pools for 2000 are being generated
if '2000' in carbon_pool_extent:
# List of output directories and output file name patterns
output_dir_list = output_dir_list + [cn.AGC_2000_dir, cn.BGC_2000_dir, cn.deadwood_2000_dir,
cn.litter_2000_dir, cn.soil_C_full_extent_2000_dir, cn.total_C_2000_dir]
output_pattern_list = output_pattern_list + [cn.pattern_AGC_2000, cn.pattern_BGC_2000, cn.pattern_deadwood_2000,
cn.pattern_litter_2000, cn.pattern_soil_C_full_extent_2000, cn.pattern_total_C_2000]
# Files to download for this script
download_dict = {
cn.removal_forest_type_dir: [cn.pattern_removal_forest_type],
cn.mangrove_biomass_2000_dir: [cn.pattern_mangrove_biomass_2000],
cn.cont_eco_dir: [cn.pattern_cont_eco_processed],
cn.bor_tem_trop_processed_dir: [cn.pattern_bor_tem_trop_processed],
cn.precip_processed_dir: [cn.pattern_precip],
cn.elevation_processed_dir: [cn.pattern_elevation],
cn.soil_C_full_extent_2000_dir: [cn.pattern_soil_C_full_extent_2000],
cn.gain_dir: [cn.pattern_gain],
}
# Adds the correct AGB tiles to the download dictionary depending on the model run
if sensit_type == 'biomass_swap':
download_dict[cn.JPL_processed_dir] = [cn.pattern_JPL_unmasked_processed]
else:
download_dict[cn.WHRC_biomass_2000_unmasked_dir] = [cn.pattern_WHRC_biomass_2000_unmasked]
# Adds the correct loss tile to the download dictionary depending on the model run
if sensit_type == 'legal_Amazon_loss':
download_dict[cn.Brazil_annual_loss_processed_dir] = [cn.pattern_Brazil_annual_loss_processed]
elif sensit_type == 'Mekong_loss':
download_dict[cn.Mekong_loss_processed_dir] = [cn.pattern_Mekong_loss_processed]
else:
download_dict[cn.loss_dir] = [cn.pattern_loss]
# Output files and patterns and files to download if carbon emitted_pools for loss year are being generated
if 'loss' in carbon_pool_extent:
# List of output directories and output file name patterns
output_dir_list = output_dir_list + [cn.AGC_emis_year_dir, cn.BGC_emis_year_dir, cn.deadwood_emis_year_2000_dir,
cn.litter_emis_year_2000_dir, cn.soil_C_emis_year_2000_dir, cn.total_C_emis_year_dir]
output_pattern_list = output_pattern_list + [cn.pattern_AGC_emis_year, cn.pattern_BGC_emis_year, cn.pattern_deadwood_emis_year_2000,
cn.pattern_litter_emis_year_2000, cn.pattern_soil_C_emis_year_2000, cn.pattern_total_C_emis_year]
# Files to download for this script. This has the same items as the download_dict for 2000 pools plus
# other tiles.
download_dict = {
cn.removal_forest_type_dir: [cn.pattern_removal_forest_type],
cn.mangrove_biomass_2000_dir: [cn.pattern_mangrove_biomass_2000],
cn.cont_eco_dir: [cn.pattern_cont_eco_processed],
cn.bor_tem_trop_processed_dir: [cn.pattern_bor_tem_trop_processed],
cn.precip_processed_dir: [cn.pattern_precip],
cn.elevation_processed_dir: [cn.pattern_elevation],
cn.soil_C_full_extent_2000_dir: [cn.pattern_soil_C_full_extent_2000],
cn.gain_dir: [cn.pattern_gain],
cn.annual_gain_AGC_all_types_dir: [cn.pattern_annual_gain_AGC_all_types],
cn.cumul_gain_AGCO2_all_types_dir: [cn.pattern_cumul_gain_AGCO2_all_types]
}
# Adds the correct AGB tiles to the download dictionary depending on the model run
if sensit_type == 'biomass_swap':
download_dict[cn.JPL_processed_dir] = [cn.pattern_JPL_unmasked_processed]
else:
download_dict[cn.WHRC_biomass_2000_unmasked_dir] = [cn.pattern_WHRC_biomass_2000_unmasked]
# Adds the correct loss tile to the download dictionary depending on the model run
if sensit_type == 'legal_Amazon_loss':
download_dict[cn.Brazil_annual_loss_processed_dir] = [cn.pattern_Brazil_annual_loss_processed]
elif sensit_type == 'Mekong_loss':
download_dict[cn.Mekong_loss_processed_dir] = [cn.pattern_Mekong_loss_processed]
else:
download_dict[cn.loss_dir] = [cn.pattern_loss]
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir, sensit_type, tile_id_list)
# If the model run isn't the standard one, the output directory and file names are changed
if sensit_type != 'std':
uu.print_log("Changing output directory and file name pattern based on sensitivity analysis")
output_dir_list = uu.alter_dirs(sensit_type, output_dir_list)
output_pattern_list = uu.alter_patterns(sensit_type, output_pattern_list)
else:
uu.print_log("Output directory list for standard model:", output_dir_list)
# A date can optionally be provided by the full model script or a run of this script.
# This replaces the date in constants_and_names.
if run_date is not None:
output_dir_list = uu.replace_output_dir_date(output_dir_list, run_date)
# Table with IPCC Wetland Supplement Table 4.4 default mangrove gain rates
cmd = ['aws', 's3', 'cp', os.path.join(cn.gain_spreadsheet_dir, cn.gain_spreadsheet), cn.docker_base_dir]
uu.log_subprocess_output_full(cmd)
pd.options.mode.chained_assignment = None
# Imports the table with the ecozone-continent codes and the carbon gain rates
gain_table = pd.read_excel("{}".format(cn.gain_spreadsheet),
sheet_name="mangrove gain, for model")
# Removes rows with duplicate codes (N. and S. America for the same ecozone)
gain_table_simplified = gain_table.drop_duplicates(subset='gainEcoCon', keep='first')
mang_BGB_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(gain_table_simplified,
cn.below_to_above_trop_dry_mang,
cn.below_to_above_trop_wet_mang,
cn.below_to_above_subtrop_mang)
mang_deadwood_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(gain_table_simplified,
cn.deadwood_to_above_trop_dry_mang,
cn.deadwood_to_above_trop_wet_mang,
cn.deadwood_to_above_subtrop_mang)
mang_litter_AGB_ratio = create_carbon_pools.mangrove_pool_ratio_dict(gain_table_simplified,
cn.litter_to_above_trop_dry_mang,
cn.litter_to_above_trop_wet_mang,
cn.litter_to_above_subtrop_mang)
uu.print_log("Creating tiles of aboveground carbon in {}".format(carbon_pool_extent))
if cn.count == 96:
# More processors can be used for loss carbon pools than for 2000 carbon pools
if carbon_pool_extent == 'loss':
if sensit_type == 'biomass_swap':
processes = 16 # 16 processors = XXX GB peak
else:
processes = 20 # 25 processors > 750 GB peak; 16 = 560 GB peak;
# 18 = 570 GB peak; 19 = 620 GB peak; 20 = 670 GB peak; 21 > 750 GB peak
else: # For 2000, or loss & 2000
processes = 15 # 12 processors = 490 GB peak (stops around 455, then increases slowly); 15 = XXX GB peak
else:
processes = 2
uu.print_log('AGC loss year max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(partial(create_carbon_pools.create_AGC,
sensit_type=sensit_type, carbon_pool_extent=carbon_pool_extent), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_AGC(tile_id, sensit_type, carbon_pool_extent)
if carbon_pool_extent in ['loss', '2000']:
uu.upload_final_set(output_dir_list[0], output_pattern_list[0])
else:
uu.upload_final_set(output_dir_list[0], output_pattern_list[0])
uu.upload_final_set(output_dir_list[6], output_pattern_list[6])
uu.check_storage()
uu.print_log(":::::Freeing up memory for belowground carbon creation; deleting unneeded tiles")
tiles_to_delete = glob.glob('*{}*tif'.format(cn.pattern_annual_gain_AGC_all_types))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_cumul_gain_AGCO2_all_types)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log("Creating tiles of belowground carbon in {}".format(carbon_pool_extent))
# Creates a single filename pattern to pass to the multiprocessor call
if cn.count == 96:
# More processors can be used for loss carbon pools than for 2000 carbon pools
if carbon_pool_extent == 'loss':
if sensit_type == 'biomass_swap':
processes = 30 # 30 processors = XXX GB peak
else:
processes = 38 # 20 processors = 370 GB peak; 32 = 590 GB peak; 36 = 670 GB peak; 38 = 700 GB peak
else: # For 2000, or loss & 2000
processes = 30 # 20 processors = 370 GB peak; 25 = 460 GB peak; 30 = XXX GB peak
else:
processes = 2
uu.print_log('BGC max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(partial(create_carbon_pools.create_BGC, mang_BGB_AGB_ratio=mang_BGB_AGB_ratio,
carbon_pool_extent=carbon_pool_extent,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_BGC(tile_id, mang_BGB_AGB_ratio, carbon_pool_extent, sensit_type)
if carbon_pool_extent in ['loss', '2000']:
uu.upload_final_set(output_dir_list[1], output_pattern_list[1])
else:
uu.upload_final_set(output_dir_list[1], output_pattern_list[1])
uu.upload_final_set(output_dir_list[7], output_pattern_list[7])
uu.check_storage()
# 825 GB isn't enough space to create deadwood and litter 2000 while having AGC and BGC 2000 on.
# Thus must delete AGC, BGC, and soil C 2000 for creation of deadwood and litter, then copy them back to spot machine
# for total C 2000 calculation.
if '2000' in carbon_pool_extent:
uu.print_log(":::::Freeing up memory for deadwood and litter carbon 2000 creation; deleting unneeded tiles")
tiles_to_delete = []
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_BGC_2000)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_removal_forest_type)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_loss)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_gain)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_soil_C_full_extent_2000)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
uu.print_log("Creating tiles of deadwood and litter carbon in {}".format(carbon_pool_extent))
if cn.count == 96:
# More processors can be used for loss carbon pools than for 2000 carbon pools
if carbon_pool_extent == 'loss':
if sensit_type == 'biomass_swap':
processes = 10 # 10 processors = XXX GB peak
else:
processes = 14 # 32 processors = >750 GB peak; 24 > 750 GB peak; 14 = 650 GB peak; 15 = 700 GB peak
else: # For 2000, or loss & 2000
### Note: deleted precip, elevation, and WHRC AGB tiles at equatorial latitudes as deadwood and litter were produced.
### There wouldn't have been enough room for all deadwood and litter otherwise.
### For example, when deadwood and litter generation started getting up to around 50N, I deleted
### 00N precip, elevation, and WHRC AGB. I deleted all of those from 30N to 20S.
processes = 16 # 7 processors = 320 GB peak; 14 = 620 GB peak; 16 = XXX GB peak
else:
processes = 2
uu.print_log('Deadwood and litter max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(
partial(create_carbon_pools.create_deadwood_litter, mang_deadwood_AGB_ratio=mang_deadwood_AGB_ratio,
mang_litter_AGB_ratio=mang_litter_AGB_ratio,
carbon_pool_extent=carbon_pool_extent,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_deadwood_litter(tile_id, mang_deadwood_AGB_ratio, mang_litter_AGB_ratio, carbon_pool_extent, sensit_type)
if carbon_pool_extent in ['loss', '2000']:
uu.upload_final_set(output_dir_list[2], output_pattern_list[2]) # deadwood
uu.upload_final_set(output_dir_list[3], output_pattern_list[3]) # litter
else:
uu.upload_final_set(output_dir_list[2], output_pattern_list[2]) # deadwood
uu.upload_final_set(output_dir_list[3], output_pattern_list[3]) # litter
uu.upload_final_set(output_dir_list[8], output_pattern_list[8]) # deadwood
uu.upload_final_set(output_dir_list[9], output_pattern_list[9]) # litter
uu.check_storage()
uu.print_log(":::::Freeing up memory for soil and total carbon creation; deleting unneeded tiles")
tiles_to_delete = []
tiles_to_delete .extend(glob.glob('*{}*tif'.format(cn.pattern_elevation)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_precip)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_WHRC_biomass_2000_unmasked)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_JPL_unmasked_processed)))
tiles_to_delete.extend(glob.glob('*{}*tif'.format(cn.pattern_cont_eco_processed)))
uu.print_log(" Deleting", len(tiles_to_delete), "tiles...")
for tile_to_delete in tiles_to_delete:
os.remove(tile_to_delete)
uu.print_log(":::::Deleted unneeded tiles")
uu.check_storage()
if 'loss' in carbon_pool_extent:
uu.print_log("Creating tiles of soil carbon in loss extent")
# If pools in 2000 weren't generated, soil carbon in emissions extent is 4.
# If pools in 2000 were generated, soil carbon in emissions extent is 10.
if '2000' not in carbon_pool_extent:
pattern = output_pattern_list[4]
else:
pattern = output_pattern_list[10]
if cn.count == 96:
# More processors can be used for loss carbon pools than for 2000 carbon pools
if carbon_pool_extent == 'loss':
if sensit_type == 'biomass_swap':
processes = 36 # 36 processors = XXX GB peak
else:
processes = 42 # 24 processors = 360 GB peak; 32 = 490 GB peak; 38 = 580 GB peak; 42 = XXX GB peak
else: # For 2000, or loss & 2000
processes = 12 # 12 processors = XXX GB peak
else:
processes = 2
uu.print_log('Soil carbon loss year max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(partial(create_carbon_pools.create_soil_emis_extent, pattern=pattern,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_soil_emis_extent(tile_id, pattern, sensit_type)
# If pools in 2000 weren't generated, soil carbon in emissions extent is 4.
# If pools in 2000 were generated, soil carbon in emissions extent is 10.
if '2000' not in carbon_pool_extent:
uu.upload_final_set(output_dir_list[4], output_pattern_list[4])
else:
uu.upload_final_set(output_dir_list[10], output_pattern_list[10])
uu.check_storage()
if '2000' in carbon_pool_extent:
uu.print_log("Skipping soil for 2000 carbon pool calculation. Soil carbon in 2000 already created.")
uu.check_storage()
# 825 GB isn't enough space to create deadwood and litter 2000 while having AGC and BGC 2000 on.
# Thus must delete BGC and soil C 2000 for creation of deadwood and litter, then copy them back to spot machine
# for total C 2000 calculation.
if '2000' in carbon_pool_extent:
# Files to download for total C 2000. Previously deleted to save space
download_dict = {
cn.BGC_2000_dir: [cn.pattern_BGC_2000],
cn.soil_C_full_extent_2000_dir: [cn.pattern_soil_C_full_extent_2000]
}
for key, values in download_dict.items():
dir = key
pattern = values[0]
uu.s3_flexible_download(dir, pattern, cn.docker_base_dir, sensit_type, tile_id_list)
uu.print_log("Creating tiles of total carbon")
if cn.count == 96:
# More processors can be used for loss carbon pools than for 2000 carbon pools
if carbon_pool_extent == 'loss':
if sensit_type == 'biomass_swap':
processes = 14 # 14 processors = XXX GB peak
else:
processes = 18 # 20 processors > 750 GB peak (by just a bit, I think); 15 = 550 GB peak; 18 = XXX GB peak
else: # For 2000, or loss & 2000
processes = 12 # 12 processors = XXX GB peak
else:
processes = 2
uu.print_log('Total carbon loss year max processors=', processes)
pool = multiprocessing.Pool(processes)
pool.map(partial(create_carbon_pools.create_total_C, carbon_pool_extent=carbon_pool_extent,
sensit_type=sensit_type), tile_id_list)
pool.close()
pool.join()
# # For single processor use
# for tile_id in tile_id_list:
# create_carbon_pools.create_total_C(tile_id, carbon_pool_extent, sensit_type)
if carbon_pool_extent in ['loss', '2000']:
uu.upload_final_set(output_dir_list[5], output_pattern_list[5])
else:
uu.upload_final_set(output_dir_list[5], output_pattern_list[5])
uu.upload_final_set(output_dir_list[11], output_pattern_list[11])
uu.check_storage()
