def negative_vbr_flowfilter():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "Negative test scenario test cases"
print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative the VbrFlowFilterEntry to vbrthree'
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', 'NegativeFlowfilter')
if retval != 0:
print "VBRFlowFilterEntry at negative priority and dscp has Failed"
print "Because flowfilter priority range up 63 and dscp range up to 7 its more than test was faild its showing Bad error"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne|NegativeFlowfilter', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Negative Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def update_vbrif_flowfilter_pass_audit():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "TEST 4 : VBRIF->Update AUDIT FLOWFILTER DROP TEST"
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
print "****UPDATE Controller IP to Valid****"
test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
if retval != 0:
print "controller valid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass', 'UpdateFlowfilterOnePass')
if retval != 0:
print "VBRFIFlowFilterEntry Update Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst','UpdateFlowfilterOnePass', presence='yes', position=0)
if retval != 0:
print "VBRFIFlowFilterEntry Updatation Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOnePass', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->AUDIT UPDATE FLOWFILTER DROP TEST SUCCESS"
def test_vbr_flowfilter_audit_1():
print "****CREATE Controller with valid IP****"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print """TEST 1 : create VTN and VBR FLOWFILTER when controller is down
change the controller status to up trigger Audit and validate"""
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
print "****Create VTN****"
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
print "****Create VBR****"
retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
print "****UPDATE Controller IP to Valid****"
test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
if retval != 0:
print "controller valid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation Failed at Controller"
exit(1)
retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
print "****Delete VTN****"
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->FLOWFILTER AUDIT_1 TEST SUCCESS"
def update_vbr_flowfilter_pass():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print 'TEST 6 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
'ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller(
'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
'VbrTwo',
'ControllerFirst',
presence='yes',
position=1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'VbrIfTwo',
'ControllerFirst',
presence='yes',
position=0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval = flowlistentry.create_flowlistentry('FlowlistOne',
'FlowlistentryOne',
'ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
'ControllerFirst',
'FlowfilterOnePass',
presence='yes',
position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval = flowfilter.update_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOnePass',
'UpdateFlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry Update Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller(
'VtnOne|VbrOne',
'ControllerFirst',
'UpdateFlowfilterOnePass',
presence='yes',
position=0)
if retval != 0:
print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
exit(1)
retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlistentry('FlowlistOne',
'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo',
'ControllerFirst',
'FlowfilterOnePass',
presence='no',
position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
'ControllerFirst',
presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def test_vbr_flowfilter_drop():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "TEST 1 : VBR->FLOWFILTER TEST"
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
'ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller(
'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
'VbrTwo',
'ControllerFirst',
presence='yes',
position=1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'VbrIfTwo',
'ControllerFirst',
presence='yes',
position=0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval = flowlistentry.create_flowlistentry('FlowlistOne',
'FlowlistentryOne',
'ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
'ControllerFirst',
'FlowfilterOneDrop',
presence='yes',
position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlistentry('FlowlistOne',
'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
'ControllerFirst',
'FlowfilterOneDrop',
presence='no',
position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
'ControllerFirst',
presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->FLOWFILTER TEST SUCCESS"
def negative_vbrif_flowfilter_out():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "TEST 1 : VBRIF->Negative test scenario FLOWFILTER TEST"
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', 'NegativeFlowfilterOne')
if retval != 0:
print "VBRFIFlowFilterEntry Negative test case DSCP,Priority Failed"
print "Because DSCP range was up to (0-63) and priority range (0-7) its more than higher its showing Bad command so test failed "
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut|NegativeFlowfilterOne', presence='yes', position=0)
if retval != 0:
print retval
print "VBRFIFlowFilterEntry Updatation Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def negative_vbr_flowfilter():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "Negative test scenario test cases"
print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative the VbrFlowFilterEntry to vbrthree'
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
'ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller(
'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
'VbrTwo',
'ControllerFirst',
presence='yes',
position=1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'VbrIfTwo',
'ControllerFirst',
presence='yes',
position=0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval = flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval = flowlistentry.create_flowlistentry('FlowlistOne',
'FlowlistentryOne',
'ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval = flowfilter.validate_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOne',
presence='yes',
position=0)
if retval != 0:
print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
'ControllerFirst',
'FlowfilterOne',
presence='yes',
position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrThree', 'ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrThree', 'VbrIfThree')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval = flowfilter.update_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOne',
'NegativeFlowfilter')
if retval != 0:
print "VBRFlowFilterEntry at negative priority and dscp has Failed"
print "Because flowfilter priority range up 63 and dscp range up to 7 its more than test was faild its showing Bad error"
exit(1)
retval = flowfilter.validate_flowfilter_entry(
'VtnOne|VbrOne',
'FlowfilterOne|NegativeFlowfilter',
presence='yes',
position=0)
if retval != 0:
print "VBRFlowFilterEntry Negative Validate Failed at Co-ordinator"
exit(1)
retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlistentry('FlowlistOne',
'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval = flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo',
'ControllerFirst',
'FlowfilterOne',
presence='no',
position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
'ControllerFirst',
presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def test_multi_ctr_mininet_ping():
child = create_multicontroller_mininet_topology('MININETONE')
if child.isalive() == True:
print "Topology creation Success!!!"
else:
print "Topology creation Failed"
mininet_test.mininet_test.close_topology(child)
exit(1)
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 3 :Controller Create Failed"
mininet_test.close_topology(child)
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "controller state change failed"
exit(1)
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 3 :Controller Create Failed"
mininet_test.close_topology(child)
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond', "up")
if retval != 0:
print "controller state change failed"
exit(1)
retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
if retval != 0:
print "Boundary Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = validate_boundary('BOUNDARY', presence="yes", position=0)
if retval != 0:
print "Boundary Validate Failed after create"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VBR Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
if retval != 0:
print "VBRTWO Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
if retval != 0:
print "VBRIFONE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrOne',
'MultiCtrVbrIfOne',
'ControllerFirst',
position=0)
if retval != 0:
print "VBRIFONE Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VBRIFONE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrOne',
'VbrIfTwo',
'ControllerFirst',
position=1)
if retval != 0:
print "VBRIFTWO Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne',
'VbrOne',
'MultiCtrVbrIfOne',
vlan_tagged=0)
if retval != 0:
print "VBRIF1 Portmap Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
'VtnOne',
'VbrOne',
'MultiCtrVbrIfOne',
'ControllerFirst',
presence="yes")
if retval != 0:
print "VBRIF1 Portmap Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo',
'MultiCtrVbrIfThree')
if retval != 0:
print "VBRIFTHREE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'MultiCtrVbrIfThree',
'ControllerSecond',
position=0)
if retval != 0:
print "VBRIFTHREE Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
if retval != 0:
print "VBRIFFOUR Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'VbrIfFour',
'ControllerSecond',
position=0)
if retval != 0:
print "VBRIFFOUR Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne',
'VbrTwo',
'MultiCtrVbrIfThree',
vlan_tagged=0)
if retval != 0:
print "VBRIF3 Portmap Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
'VtnOne',
'VbrTwo',
'MultiCtrVbrIfThree',
'ControllerSecond',
presence="yes")
if retval != 0:
print "VBRIF3 Portmap Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = create_vlink('VLINK', 'BOUNDARY', 'VtnOne')
if retval != 0:
print "Vlink create Failed"
mininet_test.close_topology(child)
exit(1)
retval = validate_vlink('VLINK', 'VtnOne', presence="yes", position=0)
if retval != 0:
print "Vlink validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = mininet_test.ping_mininet(child, 'h2', 'h6')
if retval != 0:
print "MININET PING FAILED"
mininet_test.close_topology(child)
retval = delete_vlink('VLINK', 'VtnOne')
if retval != 0:
print "Vlink Delete Failed"
exit(1)
retval = validate_vlink('VLINK', 'VtnOne', presence="no")
if retval != 0:
print "After Delete validate vlink Failed"
exit(1)
retval = delete_boundary('BOUNDARY')
if retval != 0:
print "Delete boundary Failed"
exit(1)
retval = validate_boundary('BOUNDARY', presence="no")
if retval != 0:
print "After Delete validate boundary Failed"
exit(1)
retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrTwo',
'MultiCtrVbrIfThree')
if retval != 0:
print "VBRIF3 portmap Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
'VtnOne',
'VbrTwo',
'MultiCtrVbrIfThree',
'ControllerSecond',
presence="no")
if retval != 0:
print "After Delete VBRIF3 Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrOne',
'MultiCtrVbrIfOne')
if retval != 0:
print "VBRIF1 portmap Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
'VtnOne',
'VbrOne',
'MultiCtrVbrIfOne',
'ControllerFirst',
presence="no")
if retval != 0:
print "After Delete VBRIF1 Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
if retval != 0:
print "VTN1->VBR1->VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrOne',
'MultiCtrVbrIfOne',
'ControllerFirst',
presence="no")
if retval != 0:
print "After Delete VBRIFONE Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VTN1->VBR1->VBRIF2 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrOne',
'VbrIfTwo',
'ControllerFirst',
presence="no")
if retval != 0:
print "After Delete VBRIFTWO Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo',
'MultiCtrVbrIfThree')
if retval != 0:
print "VTN1->VBR2->VBRIF3 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'MultiCtrVbrIfThree',
'ControllerSecond',
presence="no")
if retval != 0:
print "After Delete VBRIFTHREE Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
if retval != 0:
print "VTN1->VBR2->VBRIF4 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
'VbrTwo',
'VbrIfFour',
'ControllerSecond',
presence="no")
if retval != 0:
print "After Delete VBRIFFOUR Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
'VbrOne',
'ControllerFirst',
presence="no")
if retval != 0:
print "After Delete VBR1 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne', 'VbrTwo')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
'VbrTwo',
'ControllerSecond',
presence="no")
if retval != 0:
print "After Delete VBR2 Validate Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
'ControllerFirst',
presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
'ControllerSecond',
presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
retval = controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "MININET PING MULTI CONTROLLER TEST SUCCESS"
def test_vtn_mininet_ping_demo1():
print """TEST 1 : One vtn and one VBridge with Two Interfaces one Portmap each
send packets between two configured host(H1,H3)"""
print "CREATE Controller"
print "VTNONE->VBRONE->VBRIFONE->PORTMAP"
print "VTNONE->VBRONE->VBRIFTWO->PORTMAP"
child = create_mininet_topology('MININETONE', 'ControllerFirst', '2')
if child.isalive() == True :
print "Topology creation Success!!!"
else:
print "Topology creation Failed"
close_topology(child)
exit(1)
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 1 :Controller Create Failed"
close_topology(child)
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
close_topology(child)
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VBR Create Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
if retval != 0:
print "VBRIFONE Create Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', position=0)
if retval != 0:
print "VBRIFONE Validate Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VBRIFTWO Create Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
if retval != 0:
print "VBRIFTWO Validate Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfOne', vlan_tagged=0);
if retval != 0:
print "VBRIF1 Portmap Create Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfTwo', vlan_tagged=0);
if retval != 0:
print "VBRIF2 Portmap Create Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="yes");
if retval != 0:
print "VBRIF1 Portmap Validate Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="yes");
if retval != 0:
print "VBRIF2 Portmap Validate Failed"
close_topology(child)
exit(1)
retval = ping_mininet (child,'h1','h3')
if retval != 0:
print "MININET PING FAILED"
close_topology(child)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
close_topology(child)
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
close_topology(child)
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
if retval != 0:
print "VTN1->VBR1->VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="no", position=0)
if retval != 0:
print "After Delete VBRIFONE Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VTN1->VBR1->VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="no", position=1)
if retval != 0:
print "After Delete VBRIFTWO Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst', presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst', presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "MININET PING DEMO 1 TEST SUCCESS"
def test_audit_vtn_vbr_multi_vbrif_portmap():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 6 :Controller Create Failed"
exit(1)
print "TEST 6 : VTenant with one VBridge Two VBRIF1/VBRIF2 and One PORTMAP in VBRIF1"
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR1 Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF1 Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfTwo')
if retval != 0:
print "VBRIF2 Create Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
if retval != 0:
print "After Create VBRIF1 Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',position=1)
if retval != 0:
print "After Create VBRIF2 Validate Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "VBRIF1 Portmap Create Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes",position=0);
if retval != 0:
print "VBRIF1 Portmap Validate Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Delete Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfTwo');
if retval != 0:
print "VBRIF2 Portmap Create Failed"
exit(1)
print "****UPDATE Controller IP to Valid****"
test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
if retval != 0:
print "controller valid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="yes",position=0);
if retval != 0:
print "VBRIF2 Portmap Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
if retval != 0:
print "After Create VBR1 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfTwo');
if retval != 0:
print "Portmap Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0);
if retval != 0:
print "After Delete VBRIF1 Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfTwo')
if retval != 0:
print "VBRIF2 Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
if retval != 0:
print "After Delete VBRIF1 Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="no",position=1)
if retval != 0:
print "After Delete VBRIF2 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTN1->VBR1->VBRIF1->PORTMAP(DELETE) AND VTN1->VBR1->VBRIF2->PORTMAP(CREATE) AUDIT TEST SUCCESS"
def test_vtermif_flowfilter_drop_audit():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "TEST 5 : VTERMIF->AUDIT FLOWFILTER TEST"
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
if retval != 0:
print "VTERM Create Failed"
exit(1)
retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
if retval != 0:
print "VTERMIF Create Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
if retval != 0:
print "VTERMFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
if retval != 0:
print "VTERMFlowFilterEntry Create Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
if retval != 0:
print "VTERMFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
if retval != 0:
print "VTERMFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTERM->AUDIT FLOWFILTER TEST SUCCESS"
def test_audit_vtn_vbr_vbrif_portmap():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 4 :Controller Create Failed"
exit(1)
print "TEST 4 : Test Audit with VTenant one VBridge one VBRIF and One PORTMAP"
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
print "****UPDATE Controller IP to Valid****"
test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
if retval != 0:
print "controller valid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
if retval != 0:
print "Portmap Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "After Create VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no");
if retval != 0:
print "After Delete Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
if retval != 0:
print "After Delete VBRIF Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
if retval != 0:
print "After Delete VBR Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed after VBR Deleted"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTN->VBR->VBRIF->PORTMAP AUDIT TEST SUCCESS"
def test_audit_vtn_multi_vbr_vbrif():
print "CREATE Controller"
print "VTNONE->VBRONE->VBRIFONE/VBRIFTHREE"
print "VTNONE->VBRTWO->VBRIFTWO/VBRIFFOUR"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 3 :Controller Create Failed"
exit(1)
print "TEST 3 : Audit One vtn and Two VBridges with Two Interfaces each"
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR1 Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VBR2 Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF1 Create Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
if retval != 0:
print "VBRIF1 Validate Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfOne')
if retval != 0:
print "VBR2->VBRIF1 Create Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',position=0)
if retval != 0:
print "VBR2->VBRIF2 Validate Failed"
exit(1)
print "****UPDATE Controller IP to invalid****"
test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
if retval != 0:
print "controller invalid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"down")
if retval != 0:
print "controller state change failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBR1->VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfOne')
if retval != 0:
print "VBR2->VBRIF1 Delete Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfThree')
if retval != 0:
print "VBRIF3 Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBR2->VBRIF2 Create Failed"
exit(1)
print "****UPDATE Controller IP to Valid****"
test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
if retval != 0:
print "controller valid_ip update failed"
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',position=0)
if retval != 0:
print "VBRIF3 Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',position=0)
if retval != 0:
print "VBR2->VBRIF2 Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
if retval != 0:
print "VBRONE Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',position=1)
if retval != 0:
print "VBRTWO Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfThree')
if retval != 0:
print "VBR1->VBRIF3 Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
if retval != 0:
print "VBR1->VBRIF1 Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',presence="no",position=0)
if retval != 0:
print "VBR1->VBRIF3 Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',presence="no",position=0)
if retval != 0:
print "VBR2->VBRIF1 Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBR2->VBRIF2 Delete Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="no",position=1)
if retval != 0:
print "VBR2->VBRIF2 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
if retval != 0:
print "VBR1/VTN Delete Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne','VbrTwo')
if retval != 0:
print "VBR2/VTN Delete Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no",position=0)
if retval != 0:
print "VBR1/VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',presence="no",position=1)
if retval != 0:
print "VBR2/VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTN1->VBR1->VBRIF1/VBRIF3 AND VTN1->VBR2->VBRIF1/VBRIF2 AUDIT TEST SUCCESS"
def update_vbr_flowlist():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print 'TEST 3 : VBR->FLOWLISTTEST:Update the VbrFlowListEntry'
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
if retval != 0:
print "Portmap Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
if retval != 0:
print "Portmap Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence="yes", position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=flowlistentry.update_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne')
if retval != 0:
print "VBRFlowListEntry Update Failed"
exit(1)
# retval=flowlistentry.validate_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne','ControllerFirst', presence='yes', position=0)
# if retval != 0:
# print "VBRFlowListEntry Updatation Validate Failed at Co-ordinator"
# exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=flowlistentry.validate_flowlist_at_controller('FlowlistOne', 'ControllerFirst', presence='no', position=0)
if retval != 0:
print "Flowlist validation Failed after deleting"
exit(1)
# retval=flowlistentry.validate_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne','ControllerFirst', presence='no', position=0)
# if retval != 0:
# print "VBRFlowListEntry Delete Validate Failed at Co-ordinator"
# exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWLIST TEST SUCCESS"
def test_vbr_flowfilter_pass():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "action type create pass"
print "TEST 5 : VBR->FLOWFILTER TEST"
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->FLOWFILTER TEST SUCCESS"
def test_multi_ctr_mininet_ping():
child = create_multicontroller_mininet_topology('MININETONE')
if child.isalive() == True :
print "Topology creation Success!!!"
else:
print "Topology creation Failed"
mininet_test.mininet_test.close_topology(child)
exit(1)
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "TEST 3 :Controller Create Failed"
mininet_test.close_topology(child)
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerFirst',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval = controller.add_controller_ex('ControllerSecond')
if retval != 0:
print "TEST 3 :Controller Create Failed"
mininet_test.close_topology(child)
exit(1)
# Delay for AUDIT
retval = controller.wait_until_state('ControllerSecond',"up")
if retval != 0:
print "controller state change failed"
exit(1)
retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
if retval != 0:
print "Boundary Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = validate_boundary('BOUNDARY', presence="yes", position=0)
if retval != 0:
print "Boundary Validate Failed after create"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
if retval != 0:
print "VBR Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
if retval != 0:
print "VBRTWO Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
if retval != 0:
print "VBRIFONE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', position=0)
if retval != 0:
print "VBRIFONE Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VBRIFONE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
if retval != 0:
print "VBRIFTWO Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', vlan_tagged=0);
if retval != 0:
print "VBRIF1 Portmap Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="yes");
if retval != 0:
print "VBRIF1 Portmap Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
if retval != 0:
print "VBRIFTHREE Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', position=0)
if retval != 0:
print "VBRIFTHREE Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
if retval != 0:
print "VBRIFFOUR Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'VbrIfFour', 'ControllerSecond', position=0)
if retval != 0:
print "VBRIFFOUR Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.create_portmap('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', vlan_tagged=0);
if retval != 0:
print "VBRIF3 Portmap Create Failed"
mininet_test.close_topology(child)
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="yes");
if retval != 0:
print "VBRIF3 Portmap Validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = create_vlink('VLINK', 'BOUNDARY', 'VtnOne')
if retval != 0:
print "Vlink create Failed"
mininet_test.close_topology(child)
exit(1)
retval = validate_vlink('VLINK', 'VtnOne', presence="yes", position=0)
if retval != 0:
print "Vlink validate Failed"
mininet_test.close_topology(child)
exit(1)
retval = mininet_test.ping_mininet (child,'h2','h6')
if retval != 0:
print "MININET PING FAILED"
mininet_test.close_topology(child)
retval = delete_vlink('VLINK', 'VtnOne')
if retval != 0:
print "Vlink Delete Failed"
exit(1)
retval = validate_vlink('VLINK', 'VtnOne', presence="no")
if retval != 0:
print "After Delete validate vlink Failed"
exit(1)
retval = delete_boundary('BOUNDARY')
if retval != 0:
print "Delete boundary Failed"
exit(1)
retval = validate_boundary('BOUNDARY', presence="no")
if retval != 0:
print "After Delete validate boundary Failed"
exit(1)
retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
if retval != 0:
print "VBRIF3 portmap Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="no");
if retval != 0:
print "After Delete VBRIF3 Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
if retval != 0:
print "VBRIF1 portmap Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="no");
if retval != 0:
print "After Delete VBRIF1 Portmap Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
if retval != 0:
print "VTN1->VBR1->VBRIF1 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="no")
if retval != 0:
print "After Delete VBRIFONE Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
if retval != 0:
print "VTN1->VBR1->VBRIF2 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="no")
if retval != 0:
print "After Delete VBRIFTWO Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
if retval != 0:
print "VTN1->VBR2->VBRIF3 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="no")
if retval != 0:
print "After Delete VBRIFTHREE Validate Failed"
exit(1)
retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
if retval != 0:
print "VTN1->VBR2->VBRIF4 Delete Failed"
exit(1)
retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'VbrIfFour', 'ControllerSecond', presence="no")
if retval != 0:
print "After Delete VBRIFFOUR Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst', presence="no")
if retval != 0:
print "After Delete VBR1 Validate Failed"
exit(1)
retval = vtn_vbr.delete_vbr('VtnOne', 'VbrTwo')
if retval != 0:
print "VBR/VTN Delete Failed"
exit(1)
retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrTwo', 'ControllerSecond', presence="no")
if retval != 0:
print "After Delete VBR2 Validate Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst', presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerSecond', presence="no")
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval = vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "VTN Delete Failed in coordinator"
exit(1)
print "DELETE CONTROLLER"
retval = controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER1 delete failed"
exit(1)
retval = controller.delete_controller_ex('ControllerSecond')
if retval != 0:
print "CONTROLLER2 delete failed"
exit(1)
print "MININET PING MULTI CONTROLLER TEST SUCCESS"
def update_vbr_flowfilter_drop():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print 'TEST 8 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOneDrop', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop', 'UpdateFlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilterEntry Update Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst','UpdateFlowfilterOneDrop', presence='yes', position=0)
if retval != 0:
print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
if retval != 0:
print "VBRFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOneDrop', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def test_vtermif_flowfilter_1():
print "CREATE Controller"
retval = controller.add_controller_ex('ControllerFirst')
if retval != 0:
print "Controller Create Failed"
exit(1)
print "TEST 2 : VTERMIF->FLOWFILTER TEST"
# Delay for AUDIT
retval=controller.wait_until_state('ControllerFirst', "up")
if retval != 0:
print "Controller state check Failed"
exit(1)
retval=vtn_vbr.create_vtn('VtnOne')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
if retval != 0:
print "VTN Create Failed"
exit(1)
retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree','VbrIfThree')
if retval != 0:
print "VBRIF Create Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
if retval != 0:
print "VTN Validate Failed"
exit(1)
retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
if retval != 0:
print "VBR Validate Failed"
exit(1)
retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
if retval != 0:
print "After Create VBRIF Validate Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
if retval != 0:
print "VTERM Create Failed"
exit(1)
retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
if retval != 0:
print "VTERMIF Create Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
if retval != 0:
print "Portmap Create Failed"
exit(1)
retval=flowlistentry.create_flowlist('FlowlistOne')
if retval != 0:
print "FlowList Create Failed"
exit(1)
retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
if retval != 0:
print "FlowlistEntry Create Failed"
exit(1)
retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
if retval != 0:
print "VTERMFlowFilter Create Failed"
exit(1)
retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
if retval != 0:
print "VTERMFlowFilterEntry Create Failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "VTERMFlowFilterEntry Validation at Co-ordinator Failed "
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
if retval != 0:
print "FlowFilter validation at Controller Failed"
exit(1)
retval=flowfilter.update_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne', 'UpdateFlowfilter')
if retval != 0:
print "VTERMIFFlowFilterEntry Update Failed"
exit(1)
retval=flowfilter.validate_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne|UpdateFlowfilter', presence='yes', position=0)
if retval != 0:
print "VTERMIFFlowFilterEntry Updatation Validate Failed at Co-ordinator"
exit(1)
retval=flowfilter.delete_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
if retval != 0:
print "VTERMFlowFilterEntry deletete Failed"
exit(1)
retval=flowfilter.delete_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
if retval != 0:
print "VTERMFlowFilter deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
if retval != 0:
print "FlowilistEntry deletete Failed"
exit(1)
retval=flowlistentry.delete_flowlist('FlowlistOne')
if retval != 0:
print "Flowilist deletete Failed"
exit(1)
retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
if retval != 0:
print "FlowFilter validation Failed after deleting"
exit(1)
retval=vtn_vbr.delete_vtn('VtnOne')
if retval != 0:
print "DELETE VTN Failed"
exit(1)
retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
if retval != 0:
print "VTN Validate Failed"
exit(1)
print "DELETE CONTROLLER"
retval=controller.delete_controller_ex('ControllerFirst')
if retval != 0:
print "CONTROLLER delete failed"
exit(1)
print "VTERMIF->FLOWFILTER TEST SUCCESS"