示例#1
0
    def _recv_sub_socket(self):
        while True:
            frame = self.sub_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'MSG':
                if not self._duplicate_message(message):
                    user = message.contents.get('author', message.source)
                    msg = message.contents.get('message')
                    if msg:
                        self.message_signal.emit(message.source, user, msg)

            elif message.type == 'CMD':
                command = message.contents.get('command')
                if command == 'clear':
                    self.clear_signal.emit()

            elif message.type == 'STATUS':
                state = message.contents.get('status')
                if state == 'CONNECTED':
                    state = True
                elif state == 'DISCONNECTED':
                    state = False
                else:
                    continue
                self.connected_signal.emit(state, message.source)
示例#2
0
 def _publish_helper(self, msg):
     msg = decode_vex_message(msg)
     self.chatter.on_next(msg)
     # FIXME: Awkward way to replace the uuid by creating a new vexmessage
     msg = create_vex_message(msg.target, msg.source, self.uuid, **msg.contents)
     self.loop.add_callback(self.subscription_socket.send_multipart, msg)
     self._heartbeat_helper.message_recieved()
示例#3
0
async def _run(
    messaging,
    live_chat_messages,
    live_chat_id,
):
    command_manager = AdapterCommandManager(messaging)
    frame = None
    while True:
        try:
            frame = messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
        except zmq.error.ZMQError:
            pass
        if frame:
            message = decode_vex_message(frame)
            if message.type == 'CMD':
                command_manager.parse_commands(message)
            elif message.type == 'RSP':
                message = message.contents.get('response')
                body = {
                    'snippet': {
                        'type': 'textmessageEvent',
                        'liveChatId': live_chat_id,
                        'textMessageDetails': {
                            'messageText': message
                        }
                    }
                }

                live_chat_messages.insert(part='snippet', body=body).execute()

            frame = None

        await asyncio.sleep(1)
示例#4
0
    def _recv_sub_socket(self):
        while True:
            frame = self.sub_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'MSG':
                if not self._duplicate_message(message):
                    user = message.contents.get('author', message.source)
                    msg = message.contents.get('message')
                    if msg:
                        self.message_signal.emit(message.source,
                                                 user,
                                                 msg)

            elif message.type == 'CMD':
                command = message.contents.get('command')
                if command == 'clear':
                    self.clear_signal.emit()

            elif message.type == 'STATUS':
                state = message.contents.get('status')
                if state == 'CONNECTED':
                    state = True
                elif state == 'DISCONNECTED':
                    state = False
                else:
                    continue
                self.connected_signal.emit(state, message.source)
示例#5
0
def run(database_filepath: str=None, addresses: list=None):
    if database_filepath is None:
        database_filepath = _get_database_filepath()
    if addresses is None:
        addresses = ['tcp://127.0.0.1:4001']

    database = DatabaseManager(database_filepath)
    context = zmq.Context()
    socket = context.socket(zmq.SUB)
    socket.setsockopt(zmq.SUBSCRIBE, b'')
    for address in addresses:
        socket.connect(address)
    while True:
        frame = socket.recv_multipart()
        try:
            msg = decode_vex_message(frame)
        except Exception:
            continue

        if msg.type == 'MSG':
            author = msg.contents.get('author', msg.source)
            contents = msg.contents.get('message', None)
            if contents and author:
                database.record_message(msg.source,
                                        author,
                                        contents)
示例#6
0
 def test_send_targeted_message(self):
     self.test_subscribe_socket.setsockopt_string(zmq.SUBSCRIBE, 'test')
     self.messaging.send_message('test', test='blue')
     frame = self.test_subscribe_socket.recv_multipart()
     message = decode_vex_message(frame)
     self.assertEqual(message.target, 'test')
     self.assertEqual(message.source, 'robot')
     self.assertEqual(message.contents['test'], 'blue')
     self.assertEqual(message.type, 'MSG')
示例#7
0
 def run(self):
     while True:
         frame = self.messaging.sub_socket.recv_multipart()
         message = decode_vex_message(frame)
         if message.type == 'CMD':
             self.command_manager.parse_commands(message)
         elif message.type == 'RSP':
             channel = message.contents.get('channel')
             contents = message.contents.get('response')
             self.send_message(channel, contents, mtype='groupchat')
示例#8
0
    def handle_subscription(self):
        while True:
            frame = self.messaging.sub_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'CMD':
                self.command_manager.parse_commands(message)
            if message.type == 'RSP':
                data = {}
                data['name'] = 'message'
                data['args'] = [message.contents.get('response'),
                                self._streamer_name]

                self.send_packet_helper(5, data)
示例#9
0
    def handle_subscription(self):
        while True:
            frame = self.messaging.sub_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'CMD':
                self.command_manager.parse_commands(message)
            if message.type == 'RSP':
                data = {}
                data['name'] = 'message'
                data['args'] = [
                    message.contents.get('response'), self._streamer_name
                ]

                self.send_packet_helper(5, data)
示例#10
0
    def run(self):
        while True:
            frame = self.messaging.subscription_socket.recv_multipart()
            msg = None
            try:
                msg = decode_vex_message(frame)
            except Exception:
                pass
            if msg:
                # Right now this is hardcoded into being only
                # the shell adapter
                # change this to some kind of auth code
                if ((msg.source == 'shell' or msg.source == 'command_line')
                        and msg.type == 'CMD'):

                    self.command_manager.parse_commands(msg)
示例#11
0
文件: robot.py 项目: benhoff/vexbot
    def run(self):
        while True:
            frame = self.messaging.subscription_socket.recv_multipart()
            msg = None
            try:
                msg = decode_vex_message(frame)
            except Exception:
                pass
            if msg:
                # Right now this is hardcoded into being only
                # the shell adapter
                # change this to some kind of auth code
                if ((msg.source == 'shell' or
                     msg.source == 'command_line') and msg.type == 'CMD'):

                    self.command_manager.parse_commands(msg)
示例#12
0
    def run(self):
        while True:
            frame = self.subscription_socket.recv_multipart()
            msg = decode_vex_message(frame)

            # add one to the counter
            self._counter += 1
            if msg.type == 'MSG':
                # TODO: add in some `None` parsing here
                string = msg.contents.get('message')
                # TODO: move into the classify parser
                # msg = util.clean_text(msg)
                parse_result = []
                for parser in self.parsers:
                    result = parser.parse(string)
                    # TODO: do more complex parsing here
                    # currently just get the first result and stop
                    if result:
                        parse_result.extend(result)
                        break

                for result in parse_result:
                    past_count = self._memory.get(result, 0)
                    # check to see if this was responded to recently and
                    # not respond if so
                    if (self._counter - past_count > 8 or
                            past_count == 0 or
                            string[0] == '!'):

                        keys_to_pop = ['source', 'to', 'response', 'author', 'message']
                        past_msg_content = dict(msg.contents)

                        _pop_helper(past_msg_content, keys_to_pop)

                        # FIXME
                        frame = create_vex_message(msg.source,
                                                   'vexparser',
                                                   'RSP',
                                                   author='Vex',
                                                   to=msg.contents.get('author'),
                                                   response=result,
                                                   **past_msg_content)

                        self.publish_socket.send_multipart(frame)
                        self._memory[result] = self._counter
示例#13
0
    def run(self):
        while True:
            frame = self.audio_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'AUDIO':
                sample_rate = message.contents['sample_rate']
                sample_width = message.contents['sample_width']
                number_channels = message.contents['number_channels']
                stream_data = message.contents['audio']

                msg = self.speechtotext.get_msg(stream_data,
                                                sample_rate,
                                                sample_width,
                                                number_channels)


                """
                filename = '{}.wav'.format(uuid.uuid4())

                with wave.open(filename, 'wb') as f:
                    f.setnchannels(number_channels)
                    f.setsampwidth(sample_width)
                    f.setframerate(sample_rate)
                    f.writeframes(stream_data)

                logging.error(msg)
                """

                if msg:
                    try:
                        message = msg.get('alternative')[0]['transcript']
                        alternative = msg.get('alternative')
                    except AttributeError:
                        message = msg
                        alternative = None
                    response = create_vex_message('',
                                                  'speechtotext',
                                                  'MSG',
                                                  message=message,
                                                  alternative=alternative)

                    self.publish_socket.send_multipart(response)
                else:
                    pass
示例#14
0
文件: irc.py 项目: maikeffi/vexbot
async def _check_subscription(bot):
    while True:
        await asyncio.sleep(1)
        msg = None
        try:
            msg = bot.messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
        except zmq.error.Again:
            pass
        if msg:
            msg = decode_vex_message(msg)
            if msg.type == 'CMD':
                bot.command_parser.parse_commands(msg)
            elif msg.type == 'RSP':
                channel = msg.contents.get('channel')
                message = msg.contents.get('response')
                bot.privmsg(channel, message)
                bot.messaging.send_message(author=bot.nick,
                                           message=message,
                                           channel=channel)
示例#15
0
文件: shell.py 项目: benhoff/vexbot
    def run(self):
        frame = None
        while True and not self._exit_loop:
            try:
                # NOTE: not blocking here to check the _exit_loop condition
                frame = self.messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
            except zmq.error.ZMQError:
                pass

            sleep(.5)

            if frame:
                message = decode_vex_message(frame)
                if message.type == 'RSP':
                    self.stdout.write("\n{}\n".format(self.doc_leader))
                    header = message.contents.get('original', 'Response')
                    contents = message.contents.get('response', None)
                    # FIXME
                    if (isinstance(header, (tuple, list))
                            and isinstance(contents, (tuple, list))
                            and contents):

                        for head, content in zip(header, contents):
                            self.print_topics(head, (contents,), 15, 70)
                    else:
                        if isinstance(contents, str):
                            contents = (contents,)
                        self.print_topics(header,
                                          contents,
                                          15,
                                          70)

                    self.stdout.write("vexbot: ")
                    self.stdout.flush()

                else:
                    # FIXME
                    print(message.type,
                          message.contents,
                          'fix me in shell adapter, run function')
                frame = None
示例#16
0
    def run(self):
        while True:
            frame = self.audio_socket.recv_multipart()
            message = decode_vex_message(frame)
            if message.type == 'AUDIO':
                sample_rate = message.contents['sample_rate']
                sample_width = message.contents['sample_width']
                number_channels = message.contents['number_channels']
                stream_data = message.contents['audio']

                msg = self.speechtotext.get_msg(stream_data, sample_rate,
                                                sample_width, number_channels)
                """
                filename = '{}.wav'.format(uuid.uuid4())

                with wave.open(filename, 'wb') as f:
                    f.setnchannels(number_channels)
                    f.setsampwidth(sample_width)
                    f.setframerate(sample_rate)
                    f.writeframes(stream_data)

                logging.error(msg)
                """

                if msg:
                    try:
                        message = msg.get('alternative')[0]['transcript']
                        alternative = msg.get('alternative')
                    except AttributeError:
                        message = msg
                        alternative = None
                    response = create_vex_message('',
                                                  'speechtotext',
                                                  'MSG',
                                                  message=message,
                                                  alternative=alternative)

                    self.publish_socket.send_multipart(response)
                else:
                    pass
示例#17
0
    def run(self):
        messaging = self.messaging
        # TODO: create better type here
        startup_frame = create_vex_message('',
                                           'microphone',
                                           'STATUS',
                                           status='recording')

        messaging.publish_socket.send_multipart(startup_frame)

        while True:
            # NOTE: `frame` is a list of byte strings
            # Once we recv here, MUST reply in order to loop again!
            try:
                frame = self.messaging.subscribe_socket.recv_multipart()
            except KeyboardInterrupt:
                break

            msg = decode_vex_message(frame)

            if msg.type == 'CMD':
                self.command_manager.handle_command(msg)
示例#18
0
    def _recv_loop(self):
        frame = None
        while True and self._shell.running:
            try:
                # NOTE: not blocking here to check the _exit_loop condition
                frame = self.messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
            except zmq.error.ZMQError:
                pass

            _sleep(.5)

            if frame:
                message = decode_vex_message(frame)
                print(message)
                # NOTE: No message type other than `RSP` currently handeled
                if message.type == 'RSP':
                    s = "\n{}\n".format(self._shell.doc_leader)
                    self._shell.stdout.write(s)
                    header = message.contents.get('original', 'Response')
                    contents = message.contents.get('response', None)
                    # FIXME --------------------------------------
                    if (isinstance(header, (tuple, list))
                            and isinstance(contents,
                                           (tuple, list)) and contents):

                        for head, content in zip(header, contents):
                            self._shell.print_topics(head, (contents, ), 15,
                                                     70)
                    else:
                        if isinstance(contents, str):
                            contents = (contents, )
                        self._shell.print_topics(header, contents, 15, 70)
                    # ENDFIXME ----------------------------------

                    self._shell.stdout.write("vexbot: ")
                    self._shell.stdout.flush()
                frame = None
示例#19
0
    def run(self):
        frame = None
        while True and not self._exit_loop:
            try:
                # NOTE: not blocking here to check the _exit_loop condition
                frame = self.messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
            except zmq.error.ZMQError:
                pass

            sleep(.5)

            if frame:
                message = decode_vex_message(frame)
                if message.type == 'RSP':
                    self.stdout.write("\n{}\n".format(self.doc_leader))
                    header = message.contents.get('original', 'Response')
                    contents = message.contents.get('response', None)
                    # FIXME
                    if (isinstance(header, (tuple, list))
                            and isinstance(contents,
                                           (tuple, list)) and contents):

                        for head, content in zip(header, contents):
                            self.print_topics(head, (contents, ), 15, 70)
                    else:
                        if isinstance(contents, str):
                            contents = (contents, )
                        self.print_topics(header, contents, 15, 70)

                    self.stdout.write("vexbot: ")
                    self.stdout.flush()

                else:
                    # FIXME
                    print(message.type, message.contents,
                          'fix me in shell adapter, run function')
                frame = None
示例#20
0
async def _run(messaging, live_chat_messages, live_chat_id, ):
    command_manager = AdapterCommandManager(messaging)
    frame = None
    while True:
        try:
            frame = messaging.sub_socket.recv_multipart(zmq.NOBLOCK)
        except zmq.error.ZMQError:
            pass
        if frame:
            message = decode_vex_message(frame)
            if message.type == 'CMD':
                command_manager.parse_commands(message)
            elif message.type == 'RSP':
                message = message.contents.get('response')
                body={'snippet':{'type': 'textmessageEvent',
                                 'liveChatId': live_chat_id,
                                 'textMessageDetails': {'messageText': message}}}

                live_chat_messages.insert(part='snippet',
                                          body=body).execute()

            frame = None

        await asyncio.sleep(1)