def run(test, params, env):
"""
This test virsh domfsfreeze and domfsthaw commands and their options.
1) Start a guest with/without guest agent configured;
2) Freeze the guest file systems with domfsfreeze;
3) Create a file on guest to see command hang;
4) Thaw the guest file systems with domfsthaw;
5) Check the file is already created;
6) Retouch the file the ensure guest file system are not frozen;
7) Cleanup test environment.
"""
def check_freeze(session):
"""
Check whether file system has been frozen by touch a test file
and see if command will hang.
:param session: Guest session to be tested.
"""
try:
output = session.cmd_output('touch freeze_test',
timeout=10)
test.fail("Failed to freeze file system. "
"Create file succeeded:\n%s" % output)
except aexpect.ShellTimeoutError:
pass
def check_thaw(session):
"""
Check whether file system has been thawed by check a test file
prohibited from creation when frozen created and successfully touch
the file again.
:param session: Guest session to be tested.
"""
status, output = session.cmd_status_output('ls freeze_test')
if status:
test.fail("Failed to thaw file system. "
"Find created file failed:\n%s" % output)
try:
output = session.cmd_output('touch freeze_test', timeout=10)
except aexpect.ShellTimeoutError:
test.fail("Failed to freeze file system. "
"Touch file timeout:\n%s" % output)
def cleanup(session):
"""
Clean up the test file used for freeze/thaw test.
:param session: Guest session to be cleaned up.
"""
status, output = session.cmd_status_output('rm -f freeze_test')
if status:
test.error("Failed to cleanup test file"
"Find created file failed:\n%s" % output)
if not virsh.has_help_command('domfsfreeze'):
test.cancel("This version of libvirt does not support "
"the domfsfreeze/domfsthaw test")
channel = ("yes" == params.get("prepare_channel", "yes"))
agent = ("yes" == params.get("start_agent", "yes"))
mountpoint = params.get("mountpoint", None)
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
xml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
try:
# Add or remove qemu-agent from guest before test
vm.prepare_guest_agent(channel=channel, start=agent)
session = vm.wait_for_login()
try:
# Expected fail message patterns
fail_patts = []
if not channel:
fail_patts.append(r"QEMU guest agent is not configured")
if not agent:
# For older version
fail_patts.append(r"Guest agent not available for now")
# For newer version
fail_patts.append(r"Guest agent is not responding")
# Message patterns test should skip when met
skip_patts = [
r'The command \S+ has not been found',
r'specifying mountpoints is not supported',
]
res = virsh.domfsfreeze(vm_name, mountpoint=mountpoint)
libvirt.check_result(res, fail_patts, skip_patts)
if not res.exit_status:
check_freeze(session)
res = virsh.domfsthaw(vm_name, mountpoint=mountpoint)
libvirt.check_result(res, fail_patts, skip_patts)
if not res.exit_status:
check_thaw(session)
cleanup(session)
finally:
session.close()
finally:
xml_backup.sync()
def run(test, params, env):
"""
Test domfsthaw command, make sure that all supported options work well
Test scenaries:
1. fsthaw fs which has been freezed
2. fsthaw fs which has not been freezed
Note: --mountpoint still not supported so will not test here
"""
if not virsh.has_help_command('domfsthaw'):
raise error.TestNAError("This version of libvirt does not support "
"the domfsthaw test")
vm_name = params.get("main_vm", "avocado-vt-vm1")
start_vm = ("yes" == params.get("start_vm", "no"))
no_freeze = ("yes" == params.get("no_freeze", "yes"))
has_qemu_ga = not ("yes" == params.get("no_qemu_ga", "no"))
start_qemu_ga = not ("yes" == params.get("no_start_qemu_ga", "no"))
status_error = ("yes" == params.get("status_error", "no"))
options = params.get("domfsthaw_options", "")
vm_ref = params.get("vm_ref", "")
# Do backup for origin xml
xml_backup = vm_xml.VMXML.new_from_dumpxml(vm_name)
try:
vm = env.get_vm(vm_name)
vm.destroy()
if not vm.is_alive():
vm.start()
# Firstly, freeze all filesytems
if not no_freeze:
# Add channel device for qemu-ga
vm.prepare_guest_agent()
cmd_result = virsh.domfsfreeze(vm_name, debug=True)
if cmd_result.exit_status != 0:
raise error.TestFail("Fail to do virsh domfsfreeze, error %s" %
cmd_result.stderr)
if has_qemu_ga:
vm.prepare_guest_agent(start=start_qemu_ga)
else:
# Remove qemu-ga channel
vm.prepare_guest_agent(channel=has_qemu_ga, start=False)
if start_vm:
if not vm.is_alive():
vm.start()
else:
vm.destroy()
if vm_ref == "none":
vm_name = " "
cmd_result = virsh.domfsthaw(vm_name, options=options, debug=True)
if not status_error:
if cmd_result.exit_status != 0:
raise error.TestFail("Fail to do virsh domfsthaw, error %s" %
cmd_result.stderr)
else:
if cmd_result.exit_status == 0:
raise error.TestFail("Command 'virsh domfsthaw' failed ")
finally:
# Do domain recovery
xml_backup.sync()
def run(test, params, env):
"""
Test command: domfsinfo [--domain]
The command gets information of domain's mounted filesystems.
"""
start_vm = ("yes" == params.get("start_vm", "yes"))
start_ga = ("yes" == params.get("start_ga", "yes"))
prepare_channel = ("yes" == params.get("prepare_channel", "yes"))
status_error = ("yes" == params.get("status_error", "no"))
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
mount_dir = params.get("mount_dir", None)
quiet_mode = ("yes" == params.get("quiet_mode", False))
readonly_mode = ("yes" == params.get("readonly_mode", False))
nfs_mount = ("yes" == params.get("nfs_mount", False))
domfsfreeze = ("yes" == params.get("domfsfreeze", False))
# Hotplug and Unplug options
hotplug_unplug = ("yes" == params.get("hotplug_unplug", False))
disk_name = params.get("disk_name", "test")
disk_path = os.path.join(data_dir.get_tmp_dir(), disk_name)
disk_target = params.get("disk_target", "vdb")
fs_type = params.get("fs_type", "ext3")
new_part = ""
fail_pat = []
check_point_msg = params.get("check_point_msg", "")
if check_point_msg:
for msg in check_point_msg.split(";"):
fail_pat.append(msg)
def hotplug_domain_disk(domain, target, source=None, hotplug=True):
"""
Hot-plug/Hot-unplug disk for domain
:param domain: Guest name
:param source: Source of disk device, can leave None if hotplug=False
:param target: Target of disk device
:param hotplug: True means hotplug, False means hot-unplug
:return: Virsh command object
"""
if hotplug:
result = virsh.attach_disk(domain,
source,
target,
"--live",
ignore_status=False,
debug=True)
else:
session = vm.wait_for_login()
try:
session.cmd("umount %s" % mount_dir)
session.close()
except:
test.error(
"fail to unmount the disk before unpluging the disk")
result = virsh.detach_disk(domain,
target,
"--live",
ignore_status=False,
debug=True)
# It need more time for attachment to take effect
time.sleep(5)
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
cleanup_nfs = False
try:
reset_kwargs = {
"start_vm": start_vm,
"start_ga": start_ga,
"prepare_channel": prepare_channel
}
reset_domain(vm, **reset_kwargs)
if domfsfreeze:
result = virsh.domfsfreeze(vm_name, debug=True)
if result.exit_status:
test.fail("Failed to execute virsh.domfsfreeze:\n%s" %
result.stderr)
if nfs_mount:
nfs_device = libvirt.setup_or_cleanup_nfs(True,
mount_dir=mount_dir,
is_mount=True)
if nfs_device:
cleanup_nfs = True
if hotplug_unplug:
session = vm.wait_for_login()
new_device = libvirt.create_local_disk("file",
path=disk_path,
size="1")
parts_list_before_attach = utils_disk.get_parts_list(session)
hotplug_domain_disk(vm_name, disk_target, new_device)
parts_list_after_attach = utils_disk.get_parts_list(session)
new_part = list(
set(parts_list_after_attach).difference(
set(parts_list_before_attach)))[0]
logging.debug("The new partition is %s", new_part)
libvirt.mkfs("/dev/%s" % new_part, fs_type, session=session)
session.cmd_status(
"mkdir -p {0} ; mount /dev/{1} {0}; ls {0}".format(
mount_dir, new_part))
session.close()
# Run test case
command_dargs = {
"readonly": readonly_mode,
"quiet": quiet_mode,
"debug": True
}
result = virsh.domfsinfo(vm_name, **command_dargs)
if not result.exit_status:
if fail_pat:
test.fail("Expected fail with %s, but run succeed:\n%s" %
(fail_pat, result))
else:
if not fail_pat:
test.fail("Expected success, but run failed:\n%s" % result)
else:
# If not any pattern matches(fail_pat, result.stderr)
if not any(p in result.stderr for p in fail_pat):
test.fail(
"Expected fail with one of %s, but failed with:\n%s" %
(fail_pat, result))
# Check virsh.domfsinfo output
cmd_output = result.stdout.strip()
if quiet_mode:
head_pat = "Mountpoint\s+Name\s+Type\s+Target"
check_output(cmd_output, head_pat, test, expected=False)
elif nfs_mount:
check_output(cmd_output, mount_dir, test, expected=False)
elif hotplug_unplug:
blk_target = re.findall(r'[a-z]+', new_part)[0]
disk_pat = "%s\s+%s\s+%s\s+%s" % (mount_dir, new_part, fs_type,
blk_target)
check_output(cmd_output, disk_pat, test, expected=True)
# Unplug domain disk
hotplug_domain_disk(vm_name, target=new_part, hotplug=False)
result = virsh.domfsinfo(vm_name, **command_dargs)
if result.exit_status:
test.fail(
"Failed to run virsh.domfsinfo after disk unplug:\n%s" %
result.stderr)
check_output(result.stdout.strip(), disk_pat, test, expected=False)
else:
# Verify virsh.domfsinfo consistency
if not status_error:
session = vm.wait_for_login(timeout=120)
domfsinfo = vm.domfsinfo()
expected_result = get_mount_fs(session)
if domfsinfo and expected_result:
check_domfsinfo(domfsinfo, expected_result, test)
else:
logging.debug("Virsh.domfsinfo output:\n%s", domfsinfo)
logging.debug("Expected_result is:\n%s", expected_result)
test.error("Command output inconsistent with expected")
session.close()
finally:
if cleanup_nfs:
libvirt.setup_or_cleanup_nfs(False, mount_dir=mount_dir)
if vm.is_alive():
vm.destroy()
if hotplug_unplug:
if disk_path:
cmd = "rm -rf %s" % disk_path
process.run(cmd)
vmxml_backup.sync()
def run(test, params, env):
"""
Test domfsfreeze command, make sure that all supported options work well
Test scenaries:
1. fsfreeze all fs without options
2. fsfreeze a mountpoint with --mountpoint
3. fsfreeze a mountpoint without --mountpoint
"""
def check_freeze(session):
"""
Check whether file system has been frozen by touch a test file
and see if command will hang.
:param session: Guest session to be tested.
"""
try:
output = session.cmd_output('touch freeze_test', timeout=10)
test.fail("Failed to freeze file system. "
"Create file succeeded:%s\n" % output)
except aexpect.ShellTimeoutError:
pass
if not virsh.has_help_command('domfsfreeze'):
test.cancel("This version of libvirt does not support "
"the domfsfreeze test")
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
test.cancel("API acl test not supported in current"
" libvirt version.")
vm_ref = params.get("vm_ref", "name")
vm_name = params.get("main_vm", "virt-tests-vm1")
mountpoint = params.get("domfsfreeze_mnt", None)
options = params.get("domfsfreeze_options", "")
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
start_vm = ("yes" == params.get("start_vm", "yes"))
has_channel = ("no" == params.get("no_qemu_ga", "no"))
start_qemu_ga = ("no" == params.get("no_start_qemu_ga", "no"))
status_error = ("yes" == params.get("status_error", "no"))
# Do backup for origin xml
xml_backup = vm_xml.VMXML.new_from_dumpxml(vm_name)
try:
vm = env.get_vm(vm_name)
if vm.is_alive():
vm.destroy()
if has_channel:
# Add channel device for qemu-ga
vm.prepare_guest_agent(start=start_qemu_ga)
else:
# Remove qemu-ga channel
vm.prepare_guest_agent(channel=False, start=False)
if start_vm:
if not vm.is_alive():
vm.start()
domid = vm.get_id()
session = vm.wait_for_login()
else:
vm.destroy()
domuuid = vm.get_uuid()
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "uuid":
vm_ref = domuuid
elif vm_ref.count("invalid"):
vm_ref = uuid.uuid1()
elif vm_ref == "none":
vm_ref = ""
elif vm_ref == "name":
vm_ref = vm_name
result = virsh.domfsfreeze(vm_ref,
mountpoint=mountpoint,
options=options,
unprivileged_user=unprivileged_user,
uri=uri,
debug=True)
libvirt.check_exit_status(result, status_error)
if not result.exit_status:
check_freeze(session)
finally:
# Do domain recovery
xml_backup.sync()
def run(test, params, env):
"""
Test domfsfreeze command, make sure that all supported options work well
Test scenaries:
1. fsfreeze all fs without options
2. fsfreeze a mountpoint with --mountpoint
3. fsfreeze a mountpoint without --mountpoint
"""
def check_freeze(session):
"""
Check whether file system has been frozen by touch a test file
and see if command will hang.
:param session: Guest session to be tested.
"""
try:
output = session.cmd_output('touch freeze_test',
timeout=10)
test.fail("Failed to freeze file system. "
"Create file succeeded:%s\n" % output)
except aexpect.ShellTimeoutError:
pass
if not virsh.has_help_command('domfsfreeze'):
test.cancel("This version of libvirt does not support "
"the domfsfreeze test")
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
test.cancel("API acl test not supported in current"
" libvirt version.")
vm_ref = params.get("vm_ref", "name")
vm_name = params.get("main_vm", "virt-tests-vm1")
mountpoint = params.get("domfsfreeze_mnt", None)
options = params.get("domfsfreeze_options", "")
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
start_vm = ("yes" == params.get("start_vm", "yes"))
has_channel = ("no" == params.get("no_qemu_ga", "no"))
start_qemu_ga = ("no" == params.get("no_start_qemu_ga", "no"))
status_error = ("yes" == params.get("status_error", "no"))
# Do backup for origin xml
xml_backup = vm_xml.VMXML.new_from_dumpxml(vm_name)
try:
vm = env.get_vm(vm_name)
if vm.is_alive():
vm.destroy()
if has_channel:
# Add channel device for qemu-ga
vm.prepare_guest_agent(start=start_qemu_ga)
else:
# Remove qemu-ga channel
vm.prepare_guest_agent(channel=False, start=False)
if start_vm:
if not vm.is_alive():
vm.start()
domid = vm.get_id()
session = vm.wait_for_login()
else:
vm.destroy()
domuuid = vm.get_uuid()
if vm_ref == "id":
vm_ref = domid
elif vm_ref == "uuid":
vm_ref = domuuid
elif vm_ref.count("invalid"):
vm_ref = uuid.uuid1()
elif vm_ref == "none":
vm_ref = ""
elif vm_ref == "name":
vm_ref = vm_name
result = virsh.domfsfreeze(vm_ref, mountpoint=mountpoint,
options=options,
unprivileged_user=unprivileged_user,
uri=uri, debug=True)
libvirt.check_exit_status(result, status_error)
if not result.exit_status:
check_freeze(session)
finally:
# Do domain recovery
xml_backup.sync()
def run(test, params, env):
"""
Test domfsthaw command, make sure that all supported options work well
Test scenaries:
1. fsthaw fs which has been freezed
2. fsthaw fs which has not been freezed
Note: --mountpoint still not supported so will not test here
"""
if not virsh.has_help_command('domfsthaw'):
raise error.TestNAError("This version of libvirt does not support "
"the domfsthaw test")
vm_name = params.get("main_vm", "virt-tests-vm1")
start_vm = ("yes" == params.get("start_vm", "no"))
no_freeze = ("yes" == params.get("no_freeze", "yes"))
has_qemu_ga = not ("yes" == params.get("no_qemu_ga", "no"))
start_qemu_ga = not ("yes" == params.get("no_start_qemu_ga", "no"))
status_error = ("yes" == params.get("status_error", "no"))
options = params.get("domfsthaw_options", "")
vm_ref = params.get("vm_ref", "")
# Do backup for origin xml
xml_backup = vm_xml.VMXML.new_from_dumpxml(vm_name)
try:
vm = env.get_vm(vm_name)
vm.destroy()
if not vm.is_alive():
vm.start()
# Firstly, freeze all filesytems
if not no_freeze:
# Add channel device for qemu-ga
vm.prepare_guest_agent()
cmd_result = virsh.domfsfreeze(vm_name, debug=True)
if cmd_result.exit_status != 0:
raise error.TestFail("Fail to do virsh domfsfreeze, error %s" %
cmd_result.stderr)
if has_qemu_ga:
vm.prepare_guest_agent(start=start_qemu_ga)
else:
# Remove qemu-ga channel
vm.prepare_guest_agent(channel=has_qemu_ga, start=False)
if start_vm:
if not vm.is_alive():
vm.start()
else:
vm.destroy()
if vm_ref == "none":
vm_name = " "
cmd_result = virsh.domfsthaw(vm_name, options=options, debug=True)
if not status_error:
if cmd_result.exit_status != 0:
raise error.TestFail("Fail to do virsh domfsthaw, error %s" %
cmd_result.stderr)
else:
if cmd_result.exit_status == 0:
raise error.TestFail("Command 'virsh domfsthaw' failed ")
finally:
# Do domain recovery
xml_backup.sync()
