def run_test(_fld, _seeds, plot2d=True, plot3d=True, title='', show=False,
**kwargs):
lines, topo = viscid.calc_streamlines(_fld, _seeds, **kwargs)
topo_color = viscid.topology2color(topo)
# downsample lines for plotting
lines = [line[:, ::8] for line in lines]
try:
if not plot2d:
raise ImportError
from viscid.plot import vpyplot as vlt
from matplotlib import pyplot as plt
plt.clf()
vlt.plot2d_lines(lines, scalars=topo_color, symdir='y', marker='^')
if title:
plt.title(title)
plt.savefig(next_plot_fname(__file__, series='2d'))
if show:
plt.show()
except ImportError:
pass
try:
if not plot3d:
raise ImportError
from viscid.plot import vlab
try:
fig = _global_ns['figure']
vlab.clf()
except KeyError:
fig = vlab.figure(size=[1200, 800], offscreen=not show,
bgcolor=(1, 1, 1), fgcolor=(0, 0, 0))
_global_ns['figure'] = fig
fld_mag = np.log(viscid.magnitude(_fld))
try:
# note: mayavi.mlab.mesh can't take color tuples as scalars
# so one can't use topo_color on a mesh surface. This
# is a limitation of mayavi. To actually plot a specific
# set of colors on a mesh, one must use a texture
mesh = vlab.mesh_from_seeds(_seeds, scalars=topo, opacity=0.6)
mesh.actor.property.backface_culling = True
except RuntimeError:
pass
vlab.plot_lines(lines, scalars=fld_mag, tube_radius=0.01,
cmap='viridis')
if title:
vlab.title(title)
vlab.savefig(next_plot_fname(__file__, series='3d'))
if show:
vlab.show()
except ImportError:
pass
def _main():
crd_system = 'gse'
print(
viscid.get_dipole_moment_ang(dip_tilt=45.0,
dip_gsm=0.0,
crd_system=crd_system))
print(
viscid.get_dipole_moment_ang(dip_tilt=0.0,
dip_gsm=45.0,
crd_system=crd_system))
print(
viscid.get_dipole_moment_ang(dip_tilt=45.0,
dip_gsm=45.0,
crd_system=crd_system))
print("---")
ptsNP = np.array([[+2, -2, +2], [+2, -1, +2], [+2, 1, +2], [+2, 2, +2]]).T
ptsSP = np.array([[+2, -2, -2], [+2, -1, -2], [+2, 1, -2], [+2, 2, -2]]).T
ptsNN = np.array([[-2, -2, +2], [-2, -1, +2], [-2, 1, +2], [-2, 2, +2]]).T
ptsSN = np.array([[-2, -2, -2], [-2, -1, -2], [-2, 1, -2], [-2, 2, -2]]).T
mapped_ptsNP = dipole_map(ptsNP)
mapped_ptsNN = dipole_map(ptsNN)
mapped_ptsSP = dipole_map(ptsSP)
mapped_ptsSN = dipole_map(ptsSN)
try:
from viscid.plot import vlab
colors1 = np.array([(0.6, 0.2, 0.2), (0.2, 0.2, 0.6), (0.6, 0.6, 0.2),
(0.2, 0.6, 0.6)])
colors2 = colors1 * 0.5
vlab.points3d(ptsNP, scale_factor=0.4, color=tuple(colors1[0]))
vlab.points3d(ptsNN, scale_factor=0.4, color=tuple(colors1[1]))
vlab.points3d(ptsSP, scale_factor=0.4, color=tuple(colors1[2]))
vlab.points3d(ptsSN, scale_factor=0.4, color=tuple(colors1[3]))
vlab.points3d(mapped_ptsNP, scale_factor=0.4, color=tuple(colors2[0]))
vlab.points3d(mapped_ptsNN, scale_factor=0.4, color=tuple(colors2[1]))
vlab.points3d(mapped_ptsSP, scale_factor=0.4, color=tuple(colors2[2]))
vlab.points3d(mapped_ptsSN, scale_factor=0.4, color=tuple(colors2[3]))
b = make_dipole()
vlab.plot_lines(
viscid.calc_streamlines(b, mapped_ptsNP, ibound=0.5)[0])
vlab.plot_lines(
viscid.calc_streamlines(b, mapped_ptsNN, ibound=0.5)[0])
vlab.show()
except ImportError:
print("Mayavi not installed, no 3D plots", file=sys.stderr)
def run_test(_fld, _seeds, plot2d=True, plot3d=True, title='', show=False,
**kwargs):
lines, topo = viscid.calc_streamlines(_fld, _seeds, **kwargs)
topo_color = viscid.topology2color(topo)
# downsample lines for plotting
lines = [line[:, ::8] for line in lines]
try:
if not plot2d:
raise ImportError
from viscid.plot import vpyplot as vlt
from matplotlib import pyplot as plt
plt.clf()
vlt.plot2d_lines(lines, scalars=topo_color, symdir='y', marker='^')
if title:
plt.title(title)
plt.savefig(next_plot_fname(__file__, series='2d'))
if show:
plt.show()
except ImportError:
pass
try:
if not plot3d:
raise ImportError
vlab, _ = get_mvi_fig()
fld_mag = np.log(viscid.magnitude(_fld))
try:
# note: mayavi.mlab.mesh can't take color tuples as scalars
# so one can't use topo_color on a mesh surface. This
# is a limitation of mayavi. To actually plot a specific
# set of colors on a mesh, one must use a texture
mesh = vlab.mesh_from_seeds(_seeds, scalars=topo, opacity=0.6)
mesh.actor.property.backface_culling = True
except RuntimeError:
pass
vlab.plot_lines(lines, scalars=fld_mag, tube_radius=0.01,
cmap='viridis')
if title:
vlab.title(title)
vlab.savefig(next_plot_fname(__file__, series='3d'))
if show:
vlab.show()
except ImportError:
pass
def _test(_p1, _p2, r1=None, r2=None, color=(0.8, 0.8, 0.8)):
if r1 is not None:
_p1 = r1 * np.asarray(_p1) / np.linalg.norm(_p1)
if r2 is not None:
_p2 = r2 * np.asarray(_p2) / np.linalg.norm(_p2)
circ = great_circle(_p1, _p2)
if not np.all(np.isclose(circ[:, 0], _p1)):
print("!! great circle error P1:", _p1, ", P2:", _p2)
print(" first_point:", circ[:, 0], "!= P1")
if not np.all(np.isclose(circ[:, -1], _p2)):
print("!! great circle error P1:", _p1, ", P2:", _p2)
print(" last_point:", circ[:, -1], "!= P2")
if _HAS_MVI:
vlab.plot_lines([circ], tube_radius=0.02, color=color)
def _test(_p1, _p2, r1=None, r2=None, color=(0.8, 0.8, 0.8)):
if r1 is not None:
_p1 = r1 * np.asarray(_p1) / np.linalg.norm(_p1)
if r2 is not None:
_p2 = r2 * np.asarray(_p2) / np.linalg.norm(_p2)
circ = great_circle(_p1, _p2)
if not np.all(np.isclose(circ[:, 0], _p1)):
print("!! great circle error P1:", _p1, ", P2:", _p2)
print(" first_point:", circ[:, 0], "!= P1")
if not np.all(np.isclose(circ[:, -1], _p2)):
print("!! great circle error P1:", _p1, ", P2:", _p2)
print(" last_point:", circ[:, -1], "!= P2")
if _HAS_MVI:
vlab.plot_lines([circ], tube_radius=0.02, color=color)
def _main():
crd_system = 'gse'
print(viscid.get_dipole_moment_ang(dip_tilt=45.0, dip_gsm=0.0,
crd_system=crd_system))
print(viscid.get_dipole_moment_ang(dip_tilt=0.0, dip_gsm=45.0,
crd_system=crd_system))
print(viscid.get_dipole_moment_ang(dip_tilt=45.0, dip_gsm=45.0,
crd_system=crd_system))
print("---")
ptsNP = np.array([[+2, -2, +2], [+2, -1, +2], [+2, 1, +2], [+2, 2, +2]]).T
ptsSP = np.array([[+2, -2, -2], [+2, -1, -2], [+2, 1, -2], [+2, 2, -2]]).T
ptsNN = np.array([[-2, -2, +2], [-2, -1, +2], [-2, 1, +2], [-2, 2, +2]]).T
ptsSN = np.array([[-2, -2, -2], [-2, -1, -2], [-2, 1, -2], [-2, 2, -2]]).T
mapped_ptsNP = dipole_map(ptsNP)
mapped_ptsNN = dipole_map(ptsNN)
mapped_ptsSP = dipole_map(ptsSP)
mapped_ptsSN = dipole_map(ptsSN)
try:
from viscid.plot import vlab
colors1 = np.array([(0.6, 0.2, 0.2),
(0.2, 0.2, 0.6),
(0.6, 0.6, 0.2),
(0.2, 0.6, 0.6)])
colors2 = colors1 * 0.5
vlab.points3d(ptsNP, scale_factor=0.4, color=tuple(colors1[0]))
vlab.points3d(ptsNN, scale_factor=0.4, color=tuple(colors1[1]))
vlab.points3d(ptsSP, scale_factor=0.4, color=tuple(colors1[2]))
vlab.points3d(ptsSN, scale_factor=0.4, color=tuple(colors1[3]))
vlab.points3d(mapped_ptsNP, scale_factor=0.4, color=tuple(colors2[0]))
vlab.points3d(mapped_ptsNN, scale_factor=0.4, color=tuple(colors2[1]))
vlab.points3d(mapped_ptsSP, scale_factor=0.4, color=tuple(colors2[2]))
vlab.points3d(mapped_ptsSN, scale_factor=0.4, color=tuple(colors2[3]))
b = make_dipole()
vlab.plot_lines(viscid.calc_streamlines(b, mapped_ptsNP, ibound=0.5)[0])
vlab.plot_lines(viscid.calc_streamlines(b, mapped_ptsNN, ibound=0.5)[0])
vlab.show()
except ImportError:
print("Mayavi not installed, no 3D plots", file=sys.stderr)
def _main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument("--show", "--plot", action="store_true")
parser.add_argument("--interact", "-i", action="store_true")
args = vutil.common_argparse(parser)
f3d = viscid.load_file(os.path.join(sample_dir, 'sample_xdmf.3d.[0].xdmf'))
f_iono = viscid.load_file(os.path.join(sample_dir, "sample_xdmf.iof.[0].xdmf"))
b = f3d["b"]
v = f3d["v"]
pp = f3d["pp"]
e = f3d["e_cc"]
vlab.figure(size=(1280, 800), offscreen=not args.show)
##########################################################
# make b a dipole inside 3.1Re and set e = 0 inside 4.0Re
cotr = viscid.Cotr(time='1990-03-21T14:48', dip_tilt=0.0) # pylint: disable=not-callable
moment = cotr.get_dipole_moment(crd_system=b)
isphere_mask = viscid.make_spherical_mask(b, rmax=3.1)
viscid.fill_dipole(b, m=moment, mask=isphere_mask)
e_mask = viscid.make_spherical_mask(b, rmax=4.0)
viscid.set_in_region(e, 0.0, alpha=0.0, mask=e_mask, out=e)
######################################
# plot a scalar cut plane of pressure
pp_src = vlab.field2source(pp, center='node')
scp = vlab.scalar_cut_plane(pp_src, plane_orientation='z_axes', opacity=0.5,
transparent=True, view_controls=False,
cmap="inferno", logscale=True)
scp.implicit_plane.normal = [0, 0, -1]
scp.implicit_plane.origin = [0, 0, 0]
scp.enable_contours = True
scp.contour.filled_contours = True
scp.contour.number_of_contours = 64
cbar = vlab.colorbar(scp, title=pp.name, orientation='vertical')
cbar.scalar_bar_representation.position = (0.01, 0.13)
cbar.scalar_bar_representation.position2 = (0.08, 0.76)
######################################
# plot a vector cut plane of the flow
vcp = vlab.vector_cut_plane(v, scalars=pp_src, plane_orientation='z_axes',
view_controls=False, mode='arrow',
cmap='Greens_r')
vcp.implicit_plane.normal = [0, 0, -1]
vcp.implicit_plane.origin = [0, 0, 0]
##############################
# plot very faint isosurfaces
vx_src = vlab.field2source(v['x'], center='node')
iso = vlab.iso_surface(vx_src, contours=[0.0], opacity=0.008, cmap='Pastel1')
##############################################################
# calculate B field lines && topology in Viscid and plot them
seedsA = viscid.SphericalPatch([0, 0, 0], [2, 0, 1], 30, 15, r=5.0,
nalpha=5, nbeta=5)
seedsB = viscid.SphericalPatch([0, 0, 0], [1.9, 0, -20], 30, 15, r=5.0,
nalpha=1, nbeta=5)
seeds = np.concatenate([seedsA, seedsB], axis=1)
b_lines, topo = viscid.calc_streamlines(b, seeds, ibound=3.5,
obound0=[-25, -20, -20],
obound1=[15, 20, 20], wrap=True)
vlab.plot_lines(b_lines, scalars=viscid.topology2color(topo))
######################################################################
# plot a random circle at geosynchronus orbit with scalars colored
# by the Matplotlib viridis color map, just because we can; this is
# a useful toy for debugging
circle = viscid.Circle(p0=[0, 0, 0], r=6.618, n=128, endpoint=True)
scalar = np.sin(circle.as_local_coordinates().get_crd('phi'))
surf = vlab.plot_line(circle.get_points(), scalars=scalar, clim=0.8,
cmap="Spectral_r")
######################################################################
# Use Mayavi (VTK) to calculate field lines using an interactive seed
# These field lines are colored by E parallel
epar = viscid.project(e, b)
epar.name = "Epar"
bsl2 = vlab.streamline(b, epar, seedtype='plane', seed_resolution=4,
integration_direction='both', clim=(-0.05, 0.05))
# now tweak the VTK streamlines
bsl2.stream_tracer.maximum_propagation = 20.
bsl2.seed.widget.origin = [-11, -5.0, -2.0]
bsl2.seed.widget.point1 = [-11, 5.0, -2.0]
bsl2.seed.widget.point2 = [-11.0, -5.0, 2.0]
bsl2.streamline_type = 'tube'
bsl2.tube_filter.radius = 0.03
bsl2.stop() # this stop/start was a hack to get something to update
bsl2.start()
bsl2.seed.widget.enabled = False
cbar = vlab.colorbar(bsl2, title=epar.name, label_fmt='%.3f',
orientation='horizontal')
cbar.scalar_bar_representation.position = (0.15, 0.01)
cbar.scalar_bar_representation.position2 = (0.72, 0.10)
###############################################################
# Make a contour at the open-closed boundary in the ionosphere
seeds_iono = viscid.Sphere(r=1.063, pole=-moment, ntheta=256, nphi=256,
thetalim=(0, 180), philim=(0, 360), crd_system=b)
_, topo_iono = viscid.calc_streamlines(b, seeds_iono, ibound=1.0,
nr_procs='all',
output=viscid.OUTPUT_TOPOLOGY)
topo_iono = np.log2(topo_iono)
m = vlab.mesh_from_seeds(seeds_iono, scalars=topo_iono, opacity=1.0,
clim=(0, 3), color=(0.992, 0.445, 0.0))
m.enable_contours = True
m.actor.property.line_width = 4.0
m.contour.number_of_contours = 4
####################################################################
# Plot the ionosphere, note that the sample data has the ionosphere
# at a different time, so the open-closed boundary found above
# will not be consistant with the field aligned currents
fac_tot = 1e9 * f_iono['fac_tot']
m = vlab.plot_ionosphere(fac_tot, bounding_lat=30.0, vmin=-300, vmax=300,
opacity=0.75, rotate=cotr, crd_system=b)
m.actor.property.backface_culling = True
########################################################################
# Add some markers for earth, i.e., real earth, and dayside / nightside
# representation
vlab.plot_blue_marble(r=1.0, lines=False, ntheta=64, nphi=128,
rotate=cotr, crd_system=b)
# now shade the night side with a transparent black hemisphere
vlab.plot_earth_3d(radius=1.01, night_only=True, opacity=0.5, crd_system=b)
####################
# Finishing Touches
# vlab.axes(pp_src, nb_labels=5)
oa = vlab.orientation_axes()
oa.marker.set_viewport(0.75, 0.75, 1.0, 1.0)
# note that resize won't work if the current figure has the
# off_screen_rendering flag set
# vlab.resize([1200, 800])
vlab.view(azimuth=45, elevation=70, distance=35.0, focalpoint=[-2, 0, 0])
##############
# Save Figure
# print("saving png")
# vlab.savefig('mayavi_msphere_sample.png')
# print("saving x3d")
# # x3d files can be turned into COLLADA files with meshlab, and
# # COLLADA (.dae) files can be opened in OS X's preview
# #
# # IMPORTANT: for some reason, using bounding_lat in vlab.plot_ionosphere
# # causes a segfault when saving x3d files
# #
# vlab.savefig('mayavi_msphere_sample.x3d')
# print("done")
vlab.savefig(next_plot_fname(__file__))
###########################
# Interact Programatically
if args.interact:
vlab.interact()
#######################
# Interact Graphically
if args.show:
vlab.show()
try:
vlab.mlab.close()
except AttributeError:
pass
return 0
def _main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument("--show", "--plot", action="store_true")
args = vutil.common_argparse(parser)
b, e = make_arcade(8.0, N=[64, 64, 64])
epar = viscid.project(e, b)
epar.pretty_name = "E parallel"
###############
# Calculate Xi
seeds = viscid.Volume(xl=[-10, 0.0, -10], xh=[10, 0.0, 10], n=[64, 1, 64])
b_lines, _ = viscid.calc_streamlines(b, seeds)
xi_dat = viscid.integrate_along_lines(b_lines, e, reduction='dot')
xi = seeds.wrap_field(xi_dat, name='xi', pretty_name=r"$\Xi$")
################################
# Make 2D Matplotlib plot of Xi
vlt.plot(xi,
x=(-10, 10),
y=(-10, 10),
style='contourf',
levels=256,
lin=(2e-4, 1.5718))
vlt.plot(xi,
x=(-10, 10),
y=(-10, 10),
style='contour',
colors='grey',
levels=[0.5, 1.0])
vlt.savefig(next_plot_fname(__file__))
if args.show:
vlt.show()
############################################################
# Make 3D mayavi plot of Xi and the 'brightest' field lines
# as well as some other field lines for context
try:
from viscid.plot import vlab
except ImportError:
xfail("Mayavi not installed")
vlab.figure(size=[1200, 800], offscreen=not args.show)
inds = np.argsort(xi_dat)[-64:]
inds = np.concatenate([inds, np.arange(len(xi_dat))[::71]])
s = vlab.plot_lines(b_lines[inds], scalars=epar, cmap='viridis')
vlab.mesh_from_seeds(seeds, scalars=xi, cmap='inferno')
vlab.colorbar(s, orientation='horizontal', title=epar.pretty_name)
# vlab.streamline(b, scalars=e, seedtype='sphere', seed_resolution=4,
# integration_direction='both')
oa = vlab.orientation_axes()
oa.marker.set_viewport(0.75, 0.75, 1.0, 1.0)
vlab.view(roll=0,
azimuth=90,
elevation=25,
distance=30.0,
focalpoint=[0, 2, 0])
vlab.savefig(next_plot_fname(__file__))
if args.show:
vlab.show()
try:
vlab.mlab.close()
except AttributeError:
pass
return 0
def main():
mhd_type = "C"
make_plots = 1
mhd_type = mhd_type.upper()
if mhd_type.startswith("C"):
if mhd_type in ("C",):
f = viscid.load_file("$WORK/tmedium/*.3d.[-1].xdmf")
elif mhd_type in ("C2", "C3"):
f = viscid.load_file("$WORK/tmedium2/*.3d.[-1].xdmf")
else:
raise ValueError()
catol = 1e-8
rtol = 2e-6
elif mhd_type in ("F", "FORTRAN"):
f = viscid.load_file("$WORK/tmedium3/*.3df.[-1]")
catol = 1e-8
rtol = 7e-2
else:
raise ValueError()
do_fill_dipole = True
gslc = "x=-21.2j:12j, y=-11j:11j, z=-11j:11j"
b = f['b_cc'][gslc]
b1 = f['b_fc'][gslc]
e_cc = f['e_cc'][gslc]
e_ec = f['e_ec'][gslc]
if do_fill_dipole:
mask = viscid.make_spherical_mask(b, rmax=3.5)
viscid.fill_dipole(b, mask=mask)
mask = viscid.make_spherical_mask(b1, rmax=3.5)
viscid.fill_dipole(b1, mask=mask)
mask = None
# seeds = viscid.SphericalCap(r=1.02, ntheta=64, nphi=32, angle0=17, angle=20,
# philim=(100, 260), roll=-180.0)
# seeds = viscid.SphericalCap(r=1.02, ntheta=64, nphi=32, angle0=17, angle=20,
# philim=(0, 10), roll=0.0)
seedsN = viscid.Sphere(r=1.02, ntheta=16, nphi=16, thetalim=(15, 25),
philim=(0, 300), crd_system=b)
seedsS = viscid.Sphere(r=1.02, ntheta=16, nphi=16, thetalim=(155, 165),
philim=(0, 300), crd_system=b)
bl_kwargs = dict(ibound=0.9, obound0=(-20, -10, -10), obound1=(11, 10, 10))
# blines_cc, topo_cc = viscid.streamlines(b, seeds, **bl_kwargs)
blinesN_fc, topoN_fc = viscid.streamlines(b1, seedsN, **bl_kwargs)
_, topoS_fc = viscid.streamlines(b1, seedsS, output=viscid.OUTPUT_TOPOLOGY,
**bl_kwargs)
if True:
from viscid.plot import vlab
mesh = vlab.mesh_from_seeds(seedsN, scalars=topoN_fc)
mesh.actor.property.backface_culling = True
# vlab.plot_lines(blines_cc, scalars="#000000", tube_radius=0.03)
vlab.plot_lines(blinesN_fc, scalars=viscid.topology2color(topoN_fc),
opacity=0.7)
vlab.plot_blue_marble(r=1.0)
vlab.plot_earth_3d(radius=1.01, crd_system=b, night_only=True,
opacity=0.5)
vlab.show()
if True:
vlt.subplot(121, projection='polar')
vlt.plot(topoN_fc)
vlt.subplot(122, projection='polar')
vlt.plot(topoS_fc)
vlt.show()
return 0
def _main():
parser = argparse.ArgumentParser(description=__doc__)
parser.add_argument("--show", "--plot", action="store_true")
parser.add_argument("--interact", "-i", action="store_true")
args = vutil.common_argparse(parser)
f3d = viscid.load_file(os.path.join(sample_dir, 'sample_xdmf.3d.[0].xdmf'))
f_iono = viscid.load_file(
os.path.join(sample_dir, "sample_xdmf.iof.[0].xdmf"))
b = f3d["b"]
v = f3d["v"]
pp = f3d["pp"]
e = f3d["e_cc"]
vlab.mlab.options.offscreen = not args.show
vlab.figure(size=(1280, 800))
##########################################################
# make b a dipole inside 3.1Re and set e = 0 inside 4.0Re
cotr = viscid.Cotr(time='1990-03-21T14:48', dip_tilt=0.0) # pylint: disable=not-callable
moment = cotr.get_dipole_moment(crd_system=b)
isphere_mask = viscid.make_spherical_mask(b, rmax=3.1)
viscid.fill_dipole(b, m=moment, mask=isphere_mask)
e_mask = viscid.make_spherical_mask(b, rmax=4.0)
viscid.set_in_region(e, 0.0, alpha=0.0, mask=e_mask, out=e)
######################################
# plot a scalar cut plane of pressure
pp_src = vlab.field2source(pp, center='node')
scp = vlab.scalar_cut_plane(pp_src,
plane_orientation='z_axes',
opacity=0.5,
transparent=True,
view_controls=False,
cmap="inferno",
logscale=True)
scp.implicit_plane.normal = [0, 0, -1]
scp.implicit_plane.origin = [0, 0, 0]
scp.enable_contours = True
scp.contour.filled_contours = True
scp.contour.number_of_contours = 64
cbar = vlab.colorbar(scp, title=pp.name, orientation='vertical')
cbar.scalar_bar_representation.position = (0.01, 0.13)
cbar.scalar_bar_representation.position2 = (0.08, 0.76)
######################################
# plot a vector cut plane of the flow
vcp = vlab.vector_cut_plane(v,
scalars=pp_src,
plane_orientation='z_axes',
view_controls=False,
mode='arrow',
cmap='Greens_r')
vcp.implicit_plane.normal = [0, 0, -1]
vcp.implicit_plane.origin = [0, 0, 0]
##############################
# plot very faint isosurfaces
vx_src = vlab.field2source(v['x'], center='node')
iso = vlab.iso_surface(vx_src,
contours=[0.0],
opacity=0.008,
cmap='Pastel1')
##############################################################
# calculate B field lines && topology in Viscid and plot them
seedsA = viscid.SphericalPatch([0, 0, 0], [2, 0, 1],
30,
15,
r=5.0,
nalpha=5,
nbeta=5)
seedsB = viscid.SphericalPatch([0, 0, 0], [1.9, 0, -20],
30,
15,
r=5.0,
nalpha=1,
nbeta=5)
seeds = np.concatenate([seedsA, seedsB], axis=1)
b_lines, topo = viscid.calc_streamlines(b,
seeds,
ibound=3.5,
obound0=[-25, -20, -20],
obound1=[15, 20, 20],
wrap=True)
vlab.plot_lines(b_lines, scalars=viscid.topology2color(topo))
######################################################################
# plot a random circle at geosynchronus orbit with scalars colored
# by the Matplotlib viridis color map, just because we can; this is
# a useful toy for debugging
circle = viscid.Circle(p0=[0, 0, 0], r=6.618, n=128, endpoint=True)
scalar = np.sin(circle.as_local_coordinates().get_crd('phi'))
surf = vlab.plot_line(circle.get_points(),
scalars=scalar,
clim=0.8,
cmap="Spectral_r")
######################################################################
# Use Mayavi (VTK) to calculate field lines using an interactive seed
# These field lines are colored by E parallel
epar = viscid.project(e, b)
epar.name = "Epar"
bsl2 = vlab.streamline(b,
epar,
seedtype='plane',
seed_resolution=4,
integration_direction='both',
clim=(-0.05, 0.05))
# now tweak the VTK streamlines
bsl2.stream_tracer.maximum_propagation = 20.
bsl2.seed.widget.origin = [-11, -5.0, -2.0]
bsl2.seed.widget.point1 = [-11, 5.0, -2.0]
bsl2.seed.widget.point2 = [-11.0, -5.0, 2.0]
bsl2.streamline_type = 'tube'
bsl2.tube_filter.radius = 0.03
bsl2.stop() # this stop/start was a hack to get something to update
bsl2.start()
bsl2.seed.widget.enabled = False
cbar = vlab.colorbar(bsl2,
title=epar.name,
label_fmt='%.3f',
orientation='horizontal')
cbar.scalar_bar_representation.position = (0.15, 0.01)
cbar.scalar_bar_representation.position2 = (0.72, 0.10)
###############################################################
# Make a contour at the open-closed boundary in the ionosphere
seeds_iono = viscid.Sphere(r=1.063,
pole=-moment,
ntheta=256,
nphi=256,
thetalim=(0, 180),
philim=(0, 360),
crd_system=b)
_, topo_iono = viscid.calc_streamlines(b,
seeds_iono,
ibound=1.0,
nr_procs='all',
output=viscid.OUTPUT_TOPOLOGY)
topo_iono = np.log2(topo_iono)
m = vlab.mesh_from_seeds(seeds_iono,
scalars=topo_iono,
opacity=1.0,
clim=(0, 3),
color=(0.992, 0.445, 0.0))
m.enable_contours = True
m.actor.property.line_width = 4.0
m.contour.number_of_contours = 4
####################################################################
# Plot the ionosphere, note that the sample data has the ionosphere
# at a different time, so the open-closed boundary found above
# will not be consistant with the field aligned currents
fac_tot = 1e9 * f_iono['fac_tot']
m = vlab.plot_ionosphere(fac_tot,
bounding_lat=30.0,
vmin=-300,
vmax=300,
opacity=0.75,
rotate=cotr,
crd_system=b)
m.actor.property.backface_culling = True
########################################################################
# Add some markers for earth, i.e., real earth, and dayside / nightside
# representation
vlab.plot_blue_marble(r=1.0,
lines=False,
ntheta=64,
nphi=128,
rotate=cotr,
crd_system=b)
# now shade the night side with a transparent black hemisphere
vlab.plot_earth_3d(radius=1.01, night_only=True, opacity=0.5, crd_system=b)
####################
# Finishing Touches
# vlab.axes(pp_src, nb_labels=5)
oa = vlab.orientation_axes()
oa.marker.set_viewport(0.75, 0.75, 1.0, 1.0)
# note that resize won't work if the current figure has the
# off_screen_rendering flag set
# vlab.resize([1200, 800])
vlab.view(azimuth=45, elevation=70, distance=35.0, focalpoint=[-2, 0, 0])
##############
# Save Figure
# print("saving png")
# vlab.savefig('mayavi_msphere_sample.png')
# print("saving x3d")
# # x3d files can be turned into COLLADA files with meshlab, and
# # COLLADA (.dae) files can be opened in OS X's preview
# #
# # IMPORTANT: for some reason, using bounding_lat in vlab.plot_ionosphere
# # causes a segfault when saving x3d files
# #
# vlab.savefig('mayavi_msphere_sample.x3d')
# print("done")
vlab.savefig(next_plot_fname(__file__))
###########################
# Interact Programatically
if args.interact:
vlab.interact()
#######################
# Interact Graphically
if args.show:
vlab.show()
try:
vlab.mlab.close()
except AttributeError:
pass
return 0
def main():
mhd_type = "C"
make_plots = 1
mhd_type = mhd_type.upper()
if mhd_type.startswith("C"):
if mhd_type in ("C", ):
f = viscid.load_file("$WORK/tmedium/*.3d.[-1].xdmf")
elif mhd_type in ("C2", "C3"):
f = viscid.load_file("$WORK/tmedium2/*.3d.[-1].xdmf")
else:
raise ValueError()
catol = 1e-8
rtol = 2e-6
elif mhd_type in ("F", "FORTRAN"):
f = viscid.load_file("$WORK/tmedium3/*.3df.[-1]")
catol = 1e-8
rtol = 7e-2
else:
raise ValueError()
do_fill_dipole = True
gslc = "x=-21.2j:12j, y=-11j:11j, z=-11j:11j"
b = f['b_cc'][gslc]
b1 = f['b_fc'][gslc]
e_cc = f['e_cc'][gslc]
e_ec = f['e_ec'][gslc]
if do_fill_dipole:
mask = viscid.make_spherical_mask(b, rmax=3.5)
viscid.fill_dipole(b, mask=mask)
mask = viscid.make_spherical_mask(b1, rmax=3.5)
viscid.fill_dipole(b1, mask=mask)
mask = None
# seeds = viscid.SphericalCap(r=1.02, ntheta=64, nphi=32, angle0=17, angle=20,
# philim=(100, 260), roll=-180.0)
# seeds = viscid.SphericalCap(r=1.02, ntheta=64, nphi=32, angle0=17, angle=20,
# philim=(0, 10), roll=0.0)
seedsN = viscid.Sphere(r=1.02,
ntheta=16,
nphi=16,
thetalim=(15, 25),
philim=(0, 300),
crd_system=b)
seedsS = viscid.Sphere(r=1.02,
ntheta=16,
nphi=16,
thetalim=(155, 165),
philim=(0, 300),
crd_system=b)
bl_kwargs = dict(ibound=0.9, obound0=(-20, -10, -10), obound1=(11, 10, 10))
# blines_cc, topo_cc = viscid.streamlines(b, seeds, **bl_kwargs)
blinesN_fc, topoN_fc = viscid.streamlines(b1, seedsN, **bl_kwargs)
_, topoS_fc = viscid.streamlines(b1,
seedsS,
output=viscid.OUTPUT_TOPOLOGY,
**bl_kwargs)
if True:
from viscid.plot import vlab
mesh = vlab.mesh_from_seeds(seedsN, scalars=topoN_fc)
mesh.actor.property.backface_culling = True
# vlab.plot_lines(blines_cc, scalars="#000000", tube_radius=0.03)
vlab.plot_lines(blinesN_fc,
scalars=viscid.topology2color(topoN_fc),
opacity=0.7)
vlab.plot_blue_marble(r=1.0)
vlab.plot_earth_3d(radius=1.01,
crd_system=b,
night_only=True,
opacity=0.5)
vlab.show()
if True:
vlt.subplot(121, projection='polar')
vlt.plot(topoN_fc)
vlt.subplot(122, projection='polar')
vlt.plot(topoS_fc)
vlt.show()
return 0