or batt_num == '3' or batt_num == '4'):
break
# Make sure to use the correct cables
ps1_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AH028NK1-if00-port0'
ps2_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A703U4HD-if00-port0'
pfc1_path = '/dev/serial/by-id/usb-loon_onboard_half_stack_hv_pfc_1-if01-port0'
pfc2_path = '/dev/serial/by-id/usb-loon_onboard_half_stack_hv_pfc_2-if01-port0'
pfc3_path = '/dev/serial/by-id/usb-loon_onboard_half_stack_hv_pfc_3-if01-port0'
pfc4_path = '/dev/serial/by-id/usb-loon_onboard_half_stack_hv_pfc_4-if01-port0'
print "Accessing the XPF6020 Power Supply"
charge_v = 50
charge_i = 7 #10
ps1 = xpf6020.Xpf6020(ps1_path)
ps1.reset_ps()
ps2 = xpf6020.Xpf6020(ps2_path)
ps2.reset_ps()
ps1.set_voltage(1, charge_v)
ps1.set_currentlimit(1, charge_i)
if batt_num == '2':
ps1.set_voltage(2, charge_v)
ps1.set_currentlimit(2, charge_i)
elif batt_num == '3':
ps1.set_voltage(2, charge_v)
ps1.set_currentlimit(2, charge_i)
ps2.set_voltage(1, charge_v)
ps2.set_currentlimit(1, charge_i)
i2cvars.append('i2c1.last_wtf_details')
i2cvars.append('i2c1_sched.violation_count')
i2cvars.append('i2c1_sched.last_violation_index')
i2cvars.append('i2c2.wtf_events')
i2cvars.append('i2c1.arb_losts')
max_cycle = raw_input('How many temp cycles would you like to run?: ').strip()
pfc_path = '/dev/serial/by-id/usb-loon_onboard_motherbrain_pfc-if01-port0'
# Charge battery @ 50V and 2A max
#ps_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A5029ID1-if00-port0'
ps_path = '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0'
ps_volt = 48
ps_current = 2
print "Accessing the XPF6020 Power Supply"
ps = xpf6020.Xpf6020(ps_path)
ps.reset_ps()
ps.set_voltage(1, ps_volt)
ps.set_currentlimit(1, ps_current)
# Discharge battery @ CV mode, 46V, and 50V max
# print "Accessing the BK8500 Electronic Load"
# bkload = bk8500.Bk8500()
# bkload.remote_switch('on')
print "Accessing the Temperature Chamber"
tchamber_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A603R0MG-if00-port0'
chamber = watlowf4.WatlowF4(tchamber_path)
chamber.conditioning_on(False)
# Write headers
pfc2_path = '/dev/serial/by-id/usb-FTDI_Dual_RS232-HS-if01-port0'
pfc3_path = '/dev/serial/by-id/usb-loon_onboard_half_stack_hv_pfc-if01-port0'
pfc4_path = '/dev/serial/by-id/usb-FTDI_Dual_RS232-HS-if01-port0'
batt_num = None
while True:
batt_num = raw_input('How many batteries would you like to charge? [ 1 ~ 4 ]: ')
message = raw_input('Charging %s battery(s). Is this correct? [y/N]' % (batt_num))
if message == 'y' and (batt_num == '1' or batt_num == '2' or batt_num == '3' or batt_num == '4'):
break;
print "Accessing the XPF6020 Power Supply"
charge_v = 50
charge_i = 10
ps = xpf6020.Xpf6020(ps_path)
ps.reset_ps()
ps.set_voltage(1, charge_v)
ps.set_currentlimit(1, charge_i)
if batt_num == '2':
ps.set_voltage(2, charge_v)
ps.set_currentlimit(2, charge_i)
elif: batt_num == '3':
ps.set_voltage(2, charge_v)
ps.set_currentlimit(2, charge_i)
ps1 = xpf6020.Xpf6020(ps_path1)
ps1.reset_ps()
ps1.set_voltage(1, charge_v)
ps1.set_currentlimit(1, charge_i)
elif: batt_num == '4':
ps.set_voltage(2, charge_v)
import tools.utils as tools
from tools import shell
parser = argparse.ArgumentParser(description='GXPR Flash')
parser.add_argument('--firmware_dir',
default=None,
help='path to firmware directory (optional)')
args = parser.parse_args()
sorensen_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A5028CFJ-if00-port0'
aero_path = '/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A40132OD-if00-port0'
bridge_path = '/dev/serial/by-id/usb-loon_gxprbridge_300217-059-if03-port0'
print "Accessing the Power Supply"
sore = xpf6020.Xpf6020(sorensen_path)
sore.reset_ps()
sore.set_voltage(1, 20)
sore.set_currentlimit(1, 0.5)
print "Accessing the Aeroflex"
aero = aeroflex.Aeroflex(aero_path)
NAME = 'GXPR'
IMAGE_NAME = 'gxpr'
while True:
sore.all_output('on')
sleep(1)
unit_id = config_common.prompt_unit(NAME)
parser = argparse.ArgumentParser(description='GoPro Temp Test Script')
parser.add_argument('majortom', help='Serial port connected to Major Tom')
parser.add_argument('sorensen',
help='Serial port connected to the Sorensen XPF 6020')
parser.add_argument('tchamber',
help='Serial port connected to the Temperature Chamber')
parser.add_argument('cycle', help='Number of temperature cycle')
parser.add_argument('logfile', help='CSV file to append new measurements')
parser.add_argument('-v',
'--verbose',
action='store_true',
help='Tee serial communications to the console')
args = parser.parse_args()
print "Accessing the Power Supply"
sore = xpf6020.Xpf6020(args.sorensen)
sore.reset_ps()
sore.set_voltage(1, 40)
sore.set_currentlimit(1, 2)
sleep(1)
sore.all_output('on')
sleep(3)
print "Accessing the Temperature Chamber"
chamber = watlowf4.WatlowF4(args.tchamber)
print "Accessing Major Tom"
tom = shell.Shell(args.majortom)
sb = shell.Scoreboard(tom, None)
sbvars = []
sbvars.append('gopro_target_video_on')
