示例#1
0
def topoGPU(masterTrack, numberRangeLooks, numberAzimuthLooks, demFile,
            latFile, lonFile, hgtFile, losFile):
    '''
    Try with GPU module.
    '''
    import datetime
    import numpy as np
    from isceobj.Planet.Planet import Planet
    from zerodop.GPUtopozero.GPUtopozero import PyTopozero
    from isceobj.Util.Poly2D import Poly2D
    from iscesys import DateTimeUtil as DTU

    pointingDirection = {'right': -1, 'left': 1}

    #creat poynomials
    polyDoppler = Poly2D(name='topsApp_dopplerPoly')
    polyDoppler.setWidth(masterTrack.numberOfSamples)
    polyDoppler.setLength(masterTrack.numberOfLines)
    polyDoppler.setNormRange(1.0)
    polyDoppler.setNormAzimuth(1.0)
    polyDoppler.setMeanRange(0.0)
    polyDoppler.setMeanAzimuth(0.0)
    polyDoppler.initPoly(rangeOrder=0, azimuthOrder=0, coeffs=[[0.]])
    polyDoppler.createPoly2D()

    slantRangeImage = Poly2D()
    slantRangeImage.setWidth(masterTrack.numberOfSamples)
    slantRangeImage.setLength(masterTrack.numberOfLines)
    slantRangeImage.setNormRange(1.0)
    slantRangeImage.setNormAzimuth(1.0)
    slantRangeImage.setMeanRange(0.)
    slantRangeImage.setMeanAzimuth(0.)
    slantRangeImage.initPoly(
        rangeOrder=1,
        azimuthOrder=0,
        coeffs=[[
            masterTrack.startingRange +
            (numberRangeLooks - 1.0) / 2.0 * masterTrack.rangePixelSize,
            numberRangeLooks * masterTrack.rangePixelSize
        ]])
    slantRangeImage.createPoly2D()

    #creat images
    latImage = isceobj.createImage()
    latImage.initImage(latFile, 'write', masterTrack.numberOfSamples, 'DOUBLE')
    latImage.createImage()

    lonImage = isceobj.createImage()
    lonImage.initImage(lonFile, 'write', masterTrack.numberOfSamples, 'DOUBLE')
    lonImage.createImage()

    losImage = isceobj.createImage()
    losImage.initImage(losFile,
                       'write',
                       masterTrack.numberOfSamples,
                       'FLOAT',
                       bands=2,
                       scheme='BIL')
    losImage.setCaster('write', 'DOUBLE')
    losImage.createImage()

    heightImage = isceobj.createImage()
    heightImage.initImage(hgtFile, 'write', masterTrack.numberOfSamples,
                          'DOUBLE')
    heightImage.createImage()

    demImage = isceobj.createDemImage()
    demImage.load(demFile + '.xml')
    demImage.setCaster('read', 'FLOAT')
    demImage.createImage()

    #compute a few things
    t0 = masterTrack.sensingStart + datetime.timedelta(
        seconds=(numberAzimuthLooks - 1.0) / 2.0 *
        masterTrack.azimuthLineInterval)
    orb = masterTrack.orbit
    pegHdg = np.radians(orb.getENUHeading(t0))
    elp = Planet(pname='Earth').ellipsoid

    #call gpu topo
    topo = PyTopozero()
    topo.set_firstlat(demImage.getFirstLatitude())
    topo.set_firstlon(demImage.getFirstLongitude())
    topo.set_deltalat(demImage.getDeltaLatitude())
    topo.set_deltalon(demImage.getDeltaLongitude())
    topo.set_major(elp.a)
    topo.set_eccentricitySquared(elp.e2)
    topo.set_rSpace(numberRangeLooks * masterTrack.rangePixelSize)
    topo.set_r0(masterTrack.startingRange +
                (numberRangeLooks - 1.0) / 2.0 * masterTrack.rangePixelSize)
    topo.set_pegHdg(pegHdg)
    topo.set_prf(1.0 / (numberAzimuthLooks * masterTrack.azimuthLineInterval))
    topo.set_t0(DTU.seconds_since_midnight(t0))
    topo.set_wvl(masterTrack.radarWavelength)
    topo.set_thresh(.05)
    topo.set_demAccessor(demImage.getImagePointer())
    topo.set_dopAccessor(polyDoppler.getPointer())
    topo.set_slrngAccessor(slantRangeImage.getPointer())
    topo.set_latAccessor(latImage.getImagePointer())
    topo.set_lonAccessor(lonImage.getImagePointer())
    topo.set_losAccessor(losImage.getImagePointer())
    topo.set_heightAccessor(heightImage.getImagePointer())
    topo.set_incAccessor(0)
    topo.set_maskAccessor(0)
    topo.set_numIter(25)
    topo.set_idemWidth(demImage.getWidth())
    topo.set_idemLength(demImage.getLength())
    topo.set_ilrl(pointingDirection[masterTrack.pointingDirection])
    topo.set_extraIter(10)
    topo.set_length(masterTrack.numberOfLines)
    topo.set_width(masterTrack.numberOfSamples)
    topo.set_nRngLooks(1)
    topo.set_nAzLooks(1)
    topo.set_demMethod(5)  # BIQUINTIC METHOD
    topo.set_orbitMethod(0)  # HERMITE

    # Need to simplify orbit stuff later
    nvecs = len(orb._stateVectors)
    topo.set_orbitNvecs(nvecs)
    topo.set_orbitBasis(1)  # Is this ever different?
    topo.createOrbit(
    )  # Initializes the empty orbit to the right allocated size
    count = 0
    for sv in orb._stateVectors:
        td = DTU.seconds_since_midnight(sv.getTime())
        pos = sv.getPosition()
        vel = sv.getVelocity()
        topo.set_orbitVector(count, td, pos[0], pos[1], pos[2], vel[0], vel[1],
                             vel[2])
        count += 1

    topo.runTopo()

    #tidy up
    latImage.addDescription('Pixel-by-pixel latitude in degrees.')
    latImage.finalizeImage()
    latImage.renderHdr()

    lonImage.addDescription('Pixel-by-pixel longitude in degrees.')
    lonImage.finalizeImage()
    lonImage.renderHdr()

    heightImage.addDescription('Pixel-by-pixel height in meters.')
    heightImage.finalizeImage()
    heightImage.renderHdr()

    descr = '''Two channel Line-Of-Sight geometry image (all angles in degrees). Represents vector drawn from target to platform.
            Channel 1: Incidence angle measured from vertical at target (always +ve).
            Channel 2: Azimuth angle measured from North in Anti-clockwise direction.'''
    losImage.setImageType('bil')
    losImage.addDescription(descr)
    losImage.finalizeImage()
    losImage.renderHdr()

    demImage.finalizeImage()

    if slantRangeImage:
        try:
            slantRangeImage.finalizeImage()
        except:
            pass
示例#2
0
文件: topo.py 项目: zyizhang/isce2
def runTopoGPU(info, demImage, dop=None, nativedop=False, legendre=False):

    from isceobj import Constants as CN
    from isceobj.Planet.Planet import Planet
    from isceobj.Util.Poly2D import Poly2D
    from iscesys import DateTimeUtil as DTU
    from zerodop.GPUtopozero.GPUtopozero import PyTopozero

    ## TODO GPU does not support shadow and layover and local inc file generation
    full = False

    os.makedirs(info.outdir, exist_ok=True)

    # define variables to be used later on
    r0 = info.rangeFirstSample + (
        (info.numberRangeLooks - 1) / 2) * info.slantRangePixelSpacing
    tbef = info.sensingStart + datetime.timedelta(seconds=(
        (info.numberAzimuthLooks - 1) / 2) / info.prf)
    pegHdg = np.radians(info.orbit.getENUHeading(tbef))
    width = info.width // info.numberRangeLooks
    length = info.length // info.numberAzimuthLooks
    dr = info.slantRangePixelSpacing * info.numberRangeLooks

    # output file names
    latFilename = info.latFilename
    lonFilename = info.lonFilename
    losFilename = info.losFilename
    heightFilename = info.heightFilename
    incFilename = info.incFilename
    maskFilename = info.maskFilename

    # orbit interpolator
    if legendre:
        omethod = 2  # LEGENDRE INTERPOLATION
    else:
        omethod = 0  # HERMITE INTERPOLATION

    # tracking doppler specifications
    if nativedop and (dop is not None):
        try:
            coeffs = dop._coeffs
        except:
            coeffs = dop

        polyDoppler = Poly2D()
        polyDoppler.setWidth(width)
        polyDoppler.setLength(length)
        polyDoppler.initPoly(rangeOrder=len(coeffs) - 1,
                             azimuthOrder=0,
                             coeffs=[coeffs])
    else:
        print('Zero doppler')
        polyDoppler = Poly2D(name='stripmapStack_dopplerPoly')
        polyDoppler.setWidth(width)
        polyDoppler.setLength(length)
        polyDoppler.setNormRange(1.0)
        polyDoppler.setNormAzimuth(1.0)
        polyDoppler.setMeanRange(0.0)
        polyDoppler.setMeanAzimuth(0.0)
        polyDoppler.initPoly(rangeOrder=0, azimuthOrder=0, coeffs=[[0.0]])
        polyDoppler.createPoly2D()

    # dem
    demImage.setCaster('read', 'FLOAT')
    demImage.createImage()

    # slant range file
    slantRangeImage = Poly2D()
    slantRangeImage.setWidth(width)
    slantRangeImage.setLength(length)
    slantRangeImage.setNormRange(1.0)
    slantRangeImage.setNormAzimuth(1.0)
    slantRangeImage.setMeanRange(0.0)
    slantRangeImage.setMeanAzimuth(0.0)
    slantRangeImage.initPoly(rangeOrder=1, azimuthOrder=0, coeffs=[[r0, dr]])
    slantRangeImage.createPoly2D()

    # lat file
    latImage = isceobj.createImage()
    accessMode = 'write'
    dataType = 'DOUBLE'
    latImage.initImage(latFilename, accessMode, width, dataType)
    latImage.createImage()

    # lon file
    lonImage = isceobj.createImage()
    lonImage.initImage(lonFilename, accessMode, width, dataType)
    lonImage.createImage()

    # LOS file
    losImage = isceobj.createImage()
    dataType = 'FLOAT'
    bands = 2
    scheme = 'BIL'
    losImage.initImage(losFilename,
                       accessMode,
                       width,
                       dataType,
                       bands=bands,
                       scheme=scheme)
    losImage.setCaster('write', 'DOUBLE')
    losImage.createImage()

    # height file
    heightImage = isceobj.createImage()
    dataType = 'DOUBLE'
    heightImage.initImage(heightFilename, accessMode, width, dataType)
    heightImage.createImage()

    # add inc and mask file if requested
    if full:
        incImage = isceobj.createImage()
        dataType = 'FLOAT'
        incImage.initImage(incFilename,
                           accessMode,
                           width,
                           dataType,
                           bands=bands,
                           scheme=scheme)
        incImage.createImage()
        incImagePtr = incImage.getImagePointer()

        maskImage = isceobj.createImage()
        dataType = 'BYTE'
        bands = 1
        maskImage.initImage(maskFilename,
                            accessMode,
                            width,
                            dataType,
                            bands=bands,
                            scheme=scheme)
        maskImage.createImage()
        maskImagePtr = maskImage.getImagePointer()
    else:
        incImagePtr = 0
        maskImagePtr = 0

    # initalize planet
    elp = Planet(pname='Earth').ellipsoid

    # initialize topo object and fill with parameters
    topo = PyTopozero()
    topo.set_firstlat(demImage.getFirstLatitude())
    topo.set_firstlon(demImage.getFirstLongitude())
    topo.set_deltalat(demImage.getDeltaLatitude())
    topo.set_deltalon(demImage.getDeltaLongitude())
    topo.set_major(elp.a)
    topo.set_eccentricitySquared(elp.e2)
    topo.set_rSpace(info.slantRangePixelSpacing)
    topo.set_r0(r0)
    topo.set_pegHdg(pegHdg)
    topo.set_prf(info.prf)
    topo.set_t0(DTU.seconds_since_midnight(tbef))
    topo.set_wvl(info.radarWavelength)
    topo.set_thresh(.05)
    topo.set_demAccessor(demImage.getImagePointer())
    topo.set_dopAccessor(polyDoppler.getPointer())
    topo.set_slrngAccessor(slantRangeImage.getPointer())
    topo.set_latAccessor(latImage.getImagePointer())
    topo.set_lonAccessor(lonImage.getImagePointer())
    topo.set_losAccessor(losImage.getImagePointer())
    topo.set_heightAccessor(heightImage.getImagePointer())
    topo.set_incAccessor(incImagePtr)
    topo.set_maskAccessor(maskImagePtr)
    topo.set_numIter(25)
    topo.set_idemWidth(demImage.getWidth())
    topo.set_idemLength(demImage.getLength())
    topo.set_ilrl(info.lookSide)
    topo.set_extraIter(10)
    topo.set_length(length)
    topo.set_width(width)
    topo.set_nRngLooks(info.numberRangeLooks)
    topo.set_nAzLooks(info.numberAzimuthLooks)
    topo.set_demMethod(5)  # BIQUINTIC METHOD
    topo.set_orbitMethod(omethod)

    # Need to simplify orbit stuff later
    nvecs = len(info.orbit.stateVectors.list)
    topo.set_orbitNvecs(nvecs)
    topo.set_orbitBasis(1)  # Is this ever different?
    topo.createOrbit(
    )  # Initializes the empty orbit to the right allocated size
    count = 0

    for sv in info.orbit.stateVectors.list:
        td = DTU.seconds_since_midnight(sv.getTime())
        pos = sv.getPosition()
        vel = sv.getVelocity()
        topo.set_orbitVector(count, td, pos[0], pos[1], pos[2], vel[0], vel[1],
                             vel[2])
        count += 1

    # run topo
    topo.runTopo()

    # close the written files and add description etc
    # lat file
    latImage.addDescription('Pixel-by-pixel latitude in degrees.')
    latImage.finalizeImage()
    latImage.renderHdr()

    # lon file
    lonImage.addDescription('Pixel-by-pixel longitude in degrees.')
    lonImage.finalizeImage()
    lonImage.renderHdr()

    # height file
    heightImage.addDescription('Pixel-by-pixel height in meters.')
    heightImage.finalizeImage()
    heightImage.renderHdr()

    # los file
    descr = '''Two channel Line-Of-Sight geometry image (all angles in degrees). Represents vector drawn from target to platform.
                Channel 1: Incidence angle measured from vertical at target (always +ve).
                Channel 2: Azimuth angle measured from North in Anti-clockwise direction.'''
    losImage.setImageType('bil')
    losImage.addDescription(descr)
    losImage.finalizeImage()
    losImage.renderHdr()

    # dem/ height file
    demImage.finalizeImage()

    # adding in additional files if requested
    if full:
        descr = '''Two channel angle file.
                Channel 1: Angle between ray to target and the vertical at the sensor
                Channel 2: Local incidence angle accounting for DEM slope at target'''

        incImage.addDescription(descr)
        incImage.finalizeImage()
        incImage.renderHdr()

        descr = 'Radar shadow-layover mask. 1 - Radar Shadow. 2 - Radar Layover. 3 - Both.'
        maskImage.addDescription(descr)
        maskImage.finalizeImage()
        maskImage.renderHdr()

        if slantRangeImage:
            try:
                slantRangeImage.finalizeImage()
            except:
                pass
示例#3
0
def runTopoGPU(self):
    '''
    Try with GPU module.
    '''

    from isceobj.Planet.Planet import Planet
    from zerodop.GPUtopozero.GPUtopozero import PyTopozero
    from isceobj import Constants as CN
    from isceobj.Util.Poly2D import Poly2D
    from iscesys import DateTimeUtil as DTU

    swathList = self._insar.getValidSwathList(self.swaths)

    ####Catalog for logging
    catalog = isceobj.Catalog.createCatalog(self._insar.procDoc.name)

    ####Load in DEM
    demfilename = self.verifyDEM()
    catalog.addItem('Dem Used', demfilename, 'topo')

    frames = []
    swaths = []
    swathStarts = []

    for swath in swathList:
        #####Load the master product
        master = self._insar.loadProduct(
            os.path.join(self._insar.masterSlcProduct,
                         'IW{0}.xml'.format(swath)))

        numCommon = self._insar.numberOfCommonBursts[swath - 1]
        startIndex = self._insar.commonBurstStartMasterIndex[swath - 1]

        if numCommon > 0:
            catalog.addItem('Number of common bursts IW-{0}'.format(swath),
                            self._insar.numberOfCommonBursts[swath - 1],
                            'topo')

            master.bursts = master.bursts[startIndex:startIndex + numCommon]
            master.numberOfBursts = numCommon

            frames.append(master)
            swaths.append(swath)
            swathStarts.append(startIndex)

    if len(frames) == 0:
        raise Exception(
            'There is no common region between the two dates to process')

    topSwath = min(frames, key=lambda x: x.sensingStart)
    leftSwath = min(frames, key=lambda x: x.startingRange)
    bottomSwath = max(frames, key=lambda x: x.sensingStop)
    rightSwath = max(frames, key=lambda x: x.farRange)

    r0 = leftSwath.startingRange
    rmax = rightSwath.farRange
    dr = frames[0].bursts[0].rangePixelSize
    t0 = topSwath.sensingStart
    tmax = bottomSwath.sensingStop
    dt = frames[0].bursts[0].azimuthTimeInterval
    wvl = frames[0].bursts[0].radarWavelength
    width = int(np.round((rmax - r0) / dr) + 1)
    lgth = int(np.round((tmax - t0).total_seconds() / dt) + 1)

    polyDoppler = Poly2D(name='topsApp_dopplerPoly')
    polyDoppler.setWidth(width)
    polyDoppler.setLength(lgth)
    polyDoppler.setNormRange(1.0)
    polyDoppler.setNormAzimuth(1.0)
    polyDoppler.setMeanRange(0.0)
    polyDoppler.setMeanAzimuth(0.0)
    polyDoppler.initPoly(rangeOrder=0, azimuthOrder=0, coeffs=[[0.]])
    polyDoppler.createPoly2D()

    slantRangeImage = Poly2D()
    slantRangeImage.setWidth(width)
    slantRangeImage.setLength(lgth)
    slantRangeImage.setNormRange(1.0)
    slantRangeImage.setNormAzimuth(1.0)
    slantRangeImage.setMeanRange(0.)
    slantRangeImage.setMeanAzimuth(0.)
    slantRangeImage.initPoly(rangeOrder=1, azimuthOrder=0, coeffs=[[r0, dr]])
    slantRangeImage.createPoly2D()

    dirname = self._insar.geometryDirname
    os.makedirs(dirname, exist_ok=True)

    latImage = isceobj.createImage()
    latImage.initImage(os.path.join(dirname, 'lat.rdr'), 'write', width,
                       'DOUBLE')
    latImage.createImage()

    lonImage = isceobj.createImage()
    lonImage.initImage(os.path.join(dirname, 'lon.rdr'), 'write', width,
                       'DOUBLE')
    lonImage.createImage()

    losImage = isceobj.createImage()
    losImage.initImage(os.path.join(dirname, 'los.rdr'),
                       'write',
                       width,
                       'FLOAT',
                       bands=2,
                       scheme='BIL')
    losImage.setCaster('write', 'DOUBLE')
    losImage.createImage()

    heightImage = isceobj.createImage()
    heightImage.initImage(os.path.join(dirname, 'hgt.rdr'), 'write', width,
                          'DOUBLE')
    heightImage.createImage()

    demImage = isceobj.createDemImage()
    demImage.load(demfilename + '.xml')
    demImage.setCaster('read', 'FLOAT')
    demImage.createImage()

    orb = self._insar.getMergedOrbit(frames)
    pegHdg = np.radians(orb.getENUHeading(t0))

    elp = Planet(pname='Earth').ellipsoid

    topo = PyTopozero()
    topo.set_firstlat(demImage.getFirstLatitude())
    topo.set_firstlon(demImage.getFirstLongitude())
    topo.set_deltalat(demImage.getDeltaLatitude())
    topo.set_deltalon(demImage.getDeltaLongitude())
    topo.set_major(elp.a)
    topo.set_eccentricitySquared(elp.e2)
    topo.set_rSpace(dr)
    topo.set_r0(r0)
    topo.set_pegHdg(pegHdg)
    topo.set_prf(1.0 / dt)
    topo.set_t0(DTU.seconds_since_midnight(t0))
    topo.set_wvl(wvl)
    topo.set_thresh(.05)
    topo.set_demAccessor(demImage.getImagePointer())
    topo.set_dopAccessor(polyDoppler.getPointer())
    topo.set_slrngAccessor(slantRangeImage.getPointer())
    topo.set_latAccessor(latImage.getImagePointer())
    topo.set_lonAccessor(lonImage.getImagePointer())
    topo.set_losAccessor(losImage.getImagePointer())
    topo.set_heightAccessor(heightImage.getImagePointer())
    topo.set_incAccessor(0)
    topo.set_maskAccessor(0)
    topo.set_numIter(25)
    topo.set_idemWidth(demImage.getWidth())
    topo.set_idemLength(demImage.getLength())
    topo.set_ilrl(-1)
    topo.set_extraIter(10)
    topo.set_length(lgth)
    topo.set_width(width)
    topo.set_nRngLooks(1)
    topo.set_nAzLooks(1)
    topo.set_demMethod(5)  # BIQUINTIC METHOD
    topo.set_orbitMethod(0)  # HERMITE

    # Need to simplify orbit stuff later
    nvecs = len(orb._stateVectors)
    topo.set_orbitNvecs(nvecs)
    topo.set_orbitBasis(1)  # Is this ever different?
    topo.createOrbit(
    )  # Initializes the empty orbit to the right allocated size
    count = 0
    for sv in orb._stateVectors:
        td = DTU.seconds_since_midnight(sv.getTime())
        pos = sv.getPosition()
        vel = sv.getVelocity()
        topo.set_orbitVector(count, td, pos[0], pos[1], pos[2], vel[0], vel[1],
                             vel[2])
        count += 1

    topo.runTopo()

    latImage.addDescription('Pixel-by-pixel latitude in degrees.')
    latImage.finalizeImage()
    latImage.renderHdr()

    lonImage.addDescription('Pixel-by-pixel longitude in degrees.')
    lonImage.finalizeImage()
    lonImage.renderHdr()

    heightImage.addDescription('Pixel-by-pixel height in meters.')
    heightImage.finalizeImage()
    heightImage.renderHdr()

    descr = '''Two channel Line-Of-Sight geometry image (all angles in degrees). Represents vector drawn from target to platform.
            Channel 1: Incidence angle measured from vertical at target (always +ve).
            Channel 2: Azimuth angle measured from North in Anti-clockwise direction.'''
    losImage.setImageType('bil')
    losImage.addDescription(descr)
    losImage.finalizeImage()
    losImage.renderHdr()

    demImage.finalizeImage()

    if slantRangeImage:
        try:
            slantRangeImage.finalizeImage()
        except:
            pass

    ####Start creating VRTs to point to global topo output
    for swath, frame, istart in zip(swaths, frames, swathStarts):
        outname = os.path.join(dirname, 'IW{0}'.format(swath))

        os.makedirs(outname, exist_ok=True)

        for ind, burst in enumerate(frame.bursts):
            top = int(np.rint((burst.sensingStart - t0).total_seconds() / dt))
            bottom = top + burst.numberOfLines
            left = int(np.rint((burst.startingRange - r0) / dr))
            right = left + burst.numberOfSamples

            buildVRT(os.path.join(dirname, 'lat.rdr'),
                     os.path.join(outname,
                                  'lat_%02d.rdr' % (ind + istart + 1)),
                     [width, lgth], [top, bottom, left, right],
                     bands=1,
                     dtype='DOUBLE')

            buildVRT(os.path.join(dirname, 'lon.rdr'),
                     os.path.join(outname,
                                  'lon_%02d.rdr' % (ind + istart + 1)),
                     [width, lgth], [top, bottom, left, right],
                     bands=1,
                     dtype='DOUBLE')

            buildVRT(os.path.join(dirname, 'hgt.rdr'),
                     os.path.join(outname,
                                  'hgt_%02d.rdr' % (ind + istart + 1)),
                     [width, lgth], [top, bottom, left, right],
                     bands=1,
                     dtype='DOUBLE')

            buildVRT(os.path.join(dirname, 'los.rdr'),
                     os.path.join(outname,
                                  'los_%02d.rdr' % (ind + istart + 1)),
                     [width, lgth], [top, bottom, left, right],
                     bands=2,
                     dtype='FLOAT')

            catalog.addItem(
                'Subset for IW{0}-B{1}'.format(swath, ind + 1 + istart),
                'Lines: {0}-{1} out of {2}, Pixels: {3}-{4} out of {5}'.format(
                    top, bottom, lgth, left, right, width), 'topo')


#            print('IW{0}-B{1}: {2} - {3}/ {4}, {5} - {6} /{7}'.format(swath, ind+1+istart, top, bottom, lgth, left, right, width))

    catalog.printToLog(logger, "runTopo")
    self._insar.procDoc.addAllFromCatalog(catalog)

    return