def specialWrite():
""" ./job-panda.py -swrite
Write TCuts from waveSkim files into splitSkim files.
"""
from ROOT import TFile, TNamed, TObject
cal = dsi.CalInfo()
runList = cal.GetSpecialRuns("longCal", 5)
for run in runList:
dsNum = dsi.GetDSNum(run)
wavePath = "%s/waves/waveSkimDS%d_run%d.root" % (dsi.specialDir, dsNum,
run)
waveFile = TFile(wavePath)
theCut = waveFile.Get("theCut").GetTitle()
print(wavePath)
splitFiles = glob.glob("%s/split/splitSkimDS%d_run%d*.root" %
(dsi.specialDir, dsNum, run))
for idx in range(len(splitFiles)):
if idx == 0:
splitPath = "%s/split/splitSkimDS%d_run%d.root" % (
dsi.specialDir, dsNum, run)
else:
splitPath = "%s/split/splitSkimDS%d_run%d_%d.root" % (
dsi.specialDir, dsNum, run, idx)
if not os.path.isfile(splitPath):
print("File doesn't exist:", splitPath)
return
splitFile = TFile(splitPath, "UPDATE")
thisCut = TNamed("theCut", theCut)
thisCut.Write("", TObject.kOverwrite)
print(splitFiles[-1])
def splitTree():
dsNum, subNum = 0, 25
inPath = "/global/homes/w/wisecg/project/waveskim/waveSkimDS%d_%d.root" % (dsNum, subNum)
outPath = "./cutSkimDS%d_%d.root" % (dsNum, subNum)
inFile = TFile(inPath)
bigTree = inFile.Get("skimTree")
theCut = inFile.Get("theCut").GetTitle()
bigTree.Draw(">>elist",theCut,"entrylist")
elist = gDirectory.Get("elist")
bigTree.SetEntryList(elist)
nList = elist.GetN()
outFile = TFile(outPath,"RECREATE")
lilTree = TTree()
lilTree.SetMaxTreeSize(150000000)
lilTree = bigTree.CopyTree("")
lilTree.Write("",TObject.kOverwrite)
thisCut = TNamed("theCut",theCut)
thisCut.Write()
def splitTree(dsNum, subNum=None, runNum=None):
""" ./job-panda.py -split (-sub dsNum subNum) (-run dsNum runNum)
Split a SINGLE waveSkim file into small (~50MB) files to speed up LAT parallel processing.
Can call 'batchSplit' instead to submit each run in the list as a job, splitting the files in parallel.
NOTE: The cut written into the first file is NOT copied into the additional files
(I couldn't get it to work within this function -- kept getting "file not closed" errors.)
To clean up, do that with the 'writeCut' function below, potentially AFTER a big parallel job.
"""
from ROOT import TFile, TTree, gDirectory, TEntryList, TNamed, TObject, gROOT
print("Splitting tree. dsNum:", dsNum, "subNum:", subNum, "runNum:",
runNum)
# Set input and output paths. Clear out any files from a previous
# try before you attempt a copy (avoid the double underscore)
inPath, outPath = "", ""
if runNum == None:
# bg mode
inPath = "%s/waveSkimDS%d_%d.root" % (dsi.waveDir, dsNum, subNum)
outPath = "%s/splitSkimDS%d_%d.root" % (dsi.splitDir, dsNum, subNum)
fileList = sorted(
glob.glob("%s/splitSkimDS%d_%d*.root" %
(dsi.splitDir, dsNum, subNum)))
for f in fileList:
os.remove(f)
elif subNum == None:
# cal mode
inPath = "%s/waveSkimDS%d_run%d.root" % (dsi.calWaveDir, dsNum, runNum)
outPath = "%s/splitSkimDS%d_run%d.root" % (dsi.calSplitDir, dsNum,
runNum)
fileList = sorted(
glob.glob("%s/splitSkimDS%d_run%d*.root" %
(dsi.calSplitDir, dsNum, runNum)))
for f in fileList:
os.remove(f)
inFile = TFile(inPath)
bigTree = inFile.Get("skimTree")
theCut = inFile.Get("theCut").GetTitle()
bigTree.Draw(">>elist", theCut, "entrylist")
elist = gDirectory.Get("elist")
bigTree.SetEntryList(elist)
nList = elist.GetN()
outFile = TFile(outPath, "RECREATE")
lilTree = TTree()
lilTree.SetMaxTreeSize(50000000) # 50 MB
thisCut = TNamed("theCut", theCut)
thisCut.Write("", TObject.kOverwrite)
lilTree = bigTree.CopyTree(
"") # this does NOT write the cut into the extra files
lilTree.Write("", TObject.kOverwrite)
def complicatedCopy():
gFile = TFile("~/project/mjddatadir/gatified/mjd_run13071.root")
bFile = TFile("~/project/mjddatadir/built/OR_run13071.root")
gatTree = gFile.Get("mjdTree")
bltTree = bFile.Get("MGTree")
gatTree.AddFriend(bltTree)
theCut = "mH > 1 && !EventDC1Bits && Entry$ < 320"
gatTree.Draw(">>elist", theCut, "entrylist")
elist = gDirectory.Get("elist")
gatTree.SetEntryList(elist)
nList = elist.GetN()
print "Using cut:\n", theCut
print "Found", gatTree.GetEntries(), "input events."
print "Found", nList, "events passing cuts."
print "Starting event loop ..."
for iList in range(nList):
entry = gatTree.GetEntryNumber(iList)
gatTree.LoadTree(entry)
gatTree.GetEntry(entry)
nChans = gatTree.channel.size()
# Loop over hits passing cuts
numPass = gatTree.Draw("channel", theCut, "GOFF", 1, iList)
chans = gatTree.GetV1()
chanList = list(set(int(chans[n]) for n in xrange(numPass)))
hitList = (iH for iH in xrange(nChans)
if gatTree.channel.at(iH) in chanList
) # a 'generator expression'
for iH in hitList:
# Load data
run = gatTree.run
chan = gatTree.channel.at(iH)
dataENF = gatTree.trapENFCal.at(iH)
print "run %d iList %d chan %d enf %.2f" % (run, iList, chan,
dataENF)
print "Copying tree with same cut ..."
outFile = TFile("~/project/lat/copyTree_test.root", "RECREATE")
outTree = gatTree.CopyTree("")
outTree.Write()
print "Wrote", outTree.GetEntries(), "events."
cutUsed = TNamed("theCut", theCut)
cutUsed.Write()
def writeCut(dsNum, subNum=None, runNum=None, calList=[]):
""" ./job-panda.py -writeCut (-ds dsNum) (-sub dsNum subNum) (-run dsNum subNum) [-cal]
Assumes the cut used in the FIRST file (even in the whole DS) should be applied
to ALL files. This should be a relatively safe assumption.
"""
from ROOT import TFile, TNamed, TObject
fileList = []
bkg = dsi.BkgInfo()
# bg
if not calList:
dsMap = bkg.dsMap()
# -ds
if subNum == None and runNum == None:
for i in range(dsMap[dsNum] + 1):
inPath = "%s/splitSkimDS%d_%d*" % (dsi.splitDir, dsNum, i)
fileList.extend(sorted(glob.glob(inPath)))
# -sub
elif runNum == None:
inPath = "%s/splitSkimDS%d_%d*" % (dsi.splitDir, dsNum, subNum)
fileList.extend(sorted(glob.glob(inPath)))
# -run
elif subNum == None:
inPath = "%s/splitSkimDS%d_run%d*" % (dsi.splitDir, dsNum, runNum)
fileList.extend(sorted(glob.glob(inPath)))
# cal
else:
dsRanges = bkg.dsRanges()
for run in calList:
for key in dsRanges:
if dsRanges[key][0] <= run <= dsRanges[key][1]:
dsNum = key
inPath = "%s/splitSkimDS%d_run%d*" % (dsi.calSplitDir, dsNum, run)
fileList.extend(sorted(glob.glob(inPath)))
# Pull the cut off the FIRST file and add it to the sub-files
if len(fileList) <= 1:
print("No files found! Exiting...")
exit(1)
firstFile = TFile(fileList[0])
theCut = firstFile.Get("theCut").GetTitle()
print("Applying this cut:\n", theCut)
for f in fileList:
print(f)
subRangeFile = TFile(f, "UPDATE")
thisCut = TNamed("theCut", theCut)
thisCut.Write("", TObject.kOverwrite)
def save_command_line_in_tfile(output_tfile_, command_line_):
from ROOT import TNamed
from ROOT import gDirectory
current_directory = gDirectory
mkdir_cd_rootfile(output_tfile_, "")
TNamed("command_line_TNamed", command_line_).Write()
current_directory.cd()
def __init__(self):
TNamed.__init__(self, 'Kernel', 'Kernel')
self.FlowList = []
self.wb = None
self.ao = None
self.dataset = None
self.treename = None
self.samplename = None
self.inputpath = None
self.outputpath = None
self.outputdump = None
self.corrections = []
self.systematics = []
self.totalflow = None
self.inputtree = None
self.outputtree = None
self._tempVec = []
self._tempTree = {}
def __init__(self):
TNamed.__init__(self, 'Kernel', 'Kernel')
self.FlowList = []
self.wb = None
self.ao = None
self.dataset = None
self.treename = None
self.samplename = None
self.inputpath = None
self.outputpath = None
self.outputdump = None
self.corrections = []
self.systematics = []
self.totalflow = None
self.inputtree = None
self.outputtree = None
self._tempVec = []
self._tempTree = {}
def test11WriteTObjArray(self):
"""Test writing of a TObjArray"""
f = TFile(self.fname, 'RECREATE')
t = TTree(self.tname, self.ttitle)
o = TObjArray()
t.Branch('mydata', o)
nameds = [TNamed(name, name) for name in self.testnames]
for name in nameds:
o.Add(name)
self.assertEqual(len(o), len(self.testnames))
t.Fill()
f.Write()
f.Close()
def AnalyzeDataSet():
CSVMWP = 0.8484
DCSVMWP = 0.6324
NEntries = skimmedTree.GetEntries()
# NEntries = 1000
h_total = TH1F('h_total', 'h_total', 2, 0, 2)
h_total_mcweight = TH1F('h_total_mcweight', 'h_total_mcweight', 2, 0, 2)
triglist = [
'HLT_IsoMu20', 'HLT_Ele27_WPLoose_Gsf',
'HLT_PFMETNoMu90_PFMHTNoMu90_IDTight_v',
'HLT_PFMETNoMu120_PFMHTNoMu120_IDTight_v'
]
outfile = TFile(outfilename, 'RECREATE')
outTree = TTree('outTree', 'tree branches')
samplepath = TNamed('samplepath', str(sys.argv[1]))
st_runId = numpy_.zeros(1, dtype=int)
st_lumiSection = array('L', [0])
st_eventId = array('L', [0])
st_pfMetCorrPt = array('f', [0.])
st_pfMetCorrPhi = array('f', [0.])
st_isData = array('b', [0])
for trigs in triglist:
exec("st_" + trigs + " = array( 'b', [ 0 ] )")
# st_HLT_IsoMu20 = array( 'b', [ 0 ] )
# st_HLT_Ele27_WPLoose_Gsf = array( 'b', [ 0 ] )
maxn = 10
st_THINnJet = array('L', [0]) #ROOT.std.vector('int')()
st_THINjetP4 = ROOT.std.vector('TLorentzVector')()
st_THINjetCISVV2 = ROOT.std.vector('float')()
st_THINjetHadronFlavor = ROOT.std.vector('int')()
st_THINjetNHadEF = ROOT.std.vector('float')()
st_THINjetCHadEF = ROOT.std.vector('float')()
st_AK4deepCSVnJet = array('L', [0]) #ROOT.std.vector('int')()
st_AK4deepCSVjetP4 = ROOT.std.vector('TLorentzVector')()
st_AK4deepCSVjetDeepCSV_b = ROOT.std.vector('float')()
st_nEle = array('L', [0]) #ROOT.std.vector('int')()
st_eleP4 = ROOT.std.vector('TLorentzVector')()
st_eleIsPassLoose = ROOT.std.vector('bool')()
st_eleIsPassMedium = ROOT.std.vector('bool')()
st_eleIsPassTight = ROOT.std.vector('bool')()
st_nMu = array('L', [0]) #ROOT.std.vector('int')()
st_muP4 = ROOT.std.vector('TLorentzVector')()
st_isLooseMuon = ROOT.std.vector('bool')()
st_isMediumMuon = ROOT.std.vector('bool')()
st_isTightMuon = ROOT.std.vector('bool')()
st_muChHadIso = ROOT.std.vector('float')()
st_muNeHadIso = ROOT.std.vector('float')()
st_muGamIso = ROOT.std.vector('float')()
st_muPUPt = ROOT.std.vector('float')()
st_muCharge = ROOT.std.vector('int')()
st_trigResult = ROOT.std.vector('bool')()
st_trigName = ROOT.std.vector('string')()
st_HPSTau_n = array('L', [0]) #ROOT.std.vector('int')()
st_HPSTau_4Momentum = ROOT.std.vector('TLorentzVector')()
mcweight = array('f', [0])
st_pu_nTrueInt = array('f', [0]) #ROOT.std.vector('std::vector<float>')()
st_nGenPar = array('L', [0])
st_genParId = ROOT.std.vector('int')()
st_genMomParId = ROOT.std.vector('int')()
st_genParSt = ROOT.std.vector('int')()
st_genParP4 = ROOT.std.vector('TLorentzVector')()
WenuRecoil = array('f', [0.])
Wenumass = array('f', [0.])
WenuPhi = array('f', [0.])
WmunuRecoil = array('f', [0.])
Wmunumass = array('f', [0.])
WmunuPhi = array('f', [0.])
ZeeRecoil = array('f', [0.])
ZeeMass = array('f', [0.])
ZeePhi = array('f', [0.])
ZmumuRecoil = array('f', [0.])
ZmumuMass = array('f', [0.])
ZmumuPhi = array('f', [0.])
TOPRecoil = array('f', [0.])
TOPPhi = array('f', [0.])
outTree.Branch('st_runId', st_runId, 'st_runId/L')
outTree.Branch('st_lumiSection', st_lumiSection, 'st_lumiSection/L')
outTree.Branch('st_eventId', st_eventId, 'st_eventId/L')
outTree.Branch('st_pfMetCorrPt', st_pfMetCorrPt, 'st_pfMetCorrPt/F')
outTree.Branch('st_pfMetCorrPhi', st_pfMetCorrPhi, 'st_pfMetCorrPhi/F')
outTree.Branch('st_isData', st_isData, 'st_isData/O')
for trigs in triglist:
exec("outTree.Branch( 'st_" + trigs + "', st_" + trigs + " , 'st_" +
trigs + "/O')")
# outTree.Branch( 'st_HLT_IsoMu20', st_HLT_IsoMu20 , 'st_HLT_IsoMu20/O')
# outTree.Branch( 'st_HLT_Ele27_WPLoose_Gsf', st_HLT_Ele27_WPLoose_Gsf , 'st_HLT_Ele27_WPLoose_Gsf/O')
outTree.Branch('st_THINnJet', st_THINnJet, 'st_THINnJet/L')
#outTree.Branch( 'st_THINnJet',st_AK4deepCSVnJet, 'st_AK4deepCSVnJet/L' )
outTree.Branch('st_THINjetP4', st_THINjetP4)
#outTree.Branch( 'st_THINjetP4',st_AK4deepCSVjetP4 )
outTree.Branch('st_THINjetCISVV2', st_THINjetCISVV2)
#outTree.Branch( 'st_THINjetCISVV2',st_AK4deepCSVjetDeepCSV_b )
outTree.Branch('st_THINjetHadronFlavor', st_THINjetHadronFlavor)
outTree.Branch('st_THINjetNHadEF', st_THINjetNHadEF)
outTree.Branch('st_THINjetCHadEF', st_THINjetCHadEF)
outTree.Branch('st_AK4deepCSVnJet', st_AK4deepCSVnJet,
'st_AK4deepCSVnJet/L')
outTree.Branch('st_AK4deepCSVjetP4', st_AK4deepCSVjetP4)
outTree.Branch('st_AK4deepCSVjetDeepCSV_b', st_AK4deepCSVjetDeepCSV_b)
outTree.Branch('st_nEle', st_nEle, 'st_nEle/L')
outTree.Branch('st_eleP4', st_eleP4)
outTree.Branch('st_eleIsPassLoose',
st_eleIsPassLoose) #, 'st_eleIsPassLoose/O' )
outTree.Branch('st_eleIsPassMedium',
st_eleIsPassMedium) #, 'st_eleIsPassMedium/O' )
outTree.Branch('st_eleIsPassTight',
st_eleIsPassTight) #, 'st_eleIsPassTight/O' )
outTree.Branch('st_nMu', st_nMu, 'st_nMu/L')
outTree.Branch('st_muP4', st_muP4)
outTree.Branch('st_isLooseMuon', st_isLooseMuon) #, 'st_isLooseMuon/O' )
outTree.Branch('st_isMediumMuon',
st_isMediumMuon) #, 'st_isMediumMuon/O' )
outTree.Branch('st_isTightMuon', st_isTightMuon) #, 'st_isTightMuon/O' )
outTree.Branch('st_muChHadIso', st_muChHadIso) #, 'st_muChHadIso/F')
outTree.Branch('st_muNeHadIso', st_muNeHadIso) #, 'st_muNeHadIso/F')
outTree.Branch('st_muGamIso', st_muGamIso) #, 'st_muGamIso/F')
outTree.Branch('st_muPUPt', st_muPUPt) #, 'st_muPUPt/F')
outTree.Branch('st_trigName', st_trigName)
outTree.Branch('st_trigResult', st_trigResult)
outTree.Branch('st_HPSTau_n', st_HPSTau_n, 'st_HPSTau_n/L')
outTree.Branch('st_HPSTau_4Momentum', st_HPSTau_4Momentum)
outTree.Branch('st_pu_nTrueInt', st_pu_nTrueInt, 'st_pu_nTrueInt/F')
outTree.Branch('mcweight', mcweight, 'mcweight/F')
outTree.Branch('st_nGenPar', st_nGenPar, 'st_nGenPar/L') #nGenPar/I
outTree.Branch('st_genParId', st_genParId) #vector<int>
outTree.Branch('st_genMomParId', st_genMomParId)
outTree.Branch('st_genParSt', st_genParSt)
outTree.Branch('st_genParP4', st_genParP4)
outTree.Branch('WenuRecoil', WenuRecoil, 'WenuRecoil/F')
outTree.Branch('Wenumass', Wenumass, 'Wenumass/F')
outTree.Branch('WenuPhi', WenuPhi, 'WenuPhi/F')
outTree.Branch('WmunuRecoil', WmunuRecoil, 'WmunuRecoil/F')
outTree.Branch('Wmunumass', Wmunumass, 'Wmunumass/F')
outTree.Branch('WmunuPhi', WmunuPhi, 'WmunuPhi/F')
outTree.Branch('ZeeRecoil', ZeeRecoil, 'ZeeRecoil/F')
outTree.Branch('ZeeMass', ZeeMass, 'ZeeMass/F')
outTree.Branch('ZeePhi', ZeePhi, 'ZeePhi/F')
outTree.Branch('ZmumuRecoil', ZmumuRecoil, 'ZmumuRecoil/F')
outTree.Branch('ZmumuMass', ZmumuMass, 'ZmumuMass/F')
outTree.Branch('ZmumuPhi', ZmumuPhi, 'ZmumuPhi/F')
outTree.Branch('TOPRecoil', TOPRecoil, 'TOPRecoil/F')
outTree.Branch('TOPPhi', TOPPhi, 'TOPPhi/F')
for ievent in range(NEntries):
# print "\n*****\nWARNING: *Test run* Processing 200 events only.\n*****\n"
# for ievent in range(200):
if ievent % 100 == 0:
print "Processed " + str(ievent) + " of " + str(
NEntries) + " events."
skimmedTree.GetEntry(ievent)
## Get all relevant branches
run = skimmedTree.__getattr__('runId')
lumi = skimmedTree.__getattr__('lumiSection')
event = skimmedTree.__getattr__('eventId')
# print "Run:"+str(run)+"; Lumi:"+str(lumi)+"; Event:"+str(event)
trigName = skimmedTree.__getattr__('hlt_trigName')
trigResult = skimmedTree.__getattr__('hlt_trigResult')
filterName = skimmedTree.__getattr__('hlt_filterName')
filterResult = skimmedTree.__getattr__('hlt_filterResult')
pfMet = skimmedTree.__getattr__('pfMetCorrPt')
pfMetPhi = skimmedTree.__getattr__('pfMetCorrPhi')
nTHINJets = skimmedTree.__getattr__('THINnJet')
thinjetP4 = skimmedTree.__getattr__('THINjetP4')
thinJetCSV = skimmedTree.__getattr__('THINjetCISVV2')
passThinJetLooseID = skimmedTree.__getattr__('THINjetPassIDLoose')
THINjetHadronFlavor = skimmedTree.__getattr__('THINjetHadronFlavor')
thinjetNhadEF = skimmedTree.__getattr__('THINjetNHadEF')
thinjetChadEF = skimmedTree.__getattr__('THINjetCHadEF')
try:
nTHINdeepCSVJets = skimmedTree.__getattr__('AK4deepCSVnJet')
thindeepCSVjetP4 = skimmedTree.__getattr__('AK4deepCSVjetP4')
thinJetdeepCSV = skimmedTree.__getattr__('AK4deepCSVjetDeepCSV_b')
except:
if ievent == 0:
print "\n**********WARNING: Looks like the ntuple is from an older version, as DeepCSV jet collection is missing. DeepCSV information will NOT be stored.**********\n"
nEle = skimmedTree.__getattr__('nEle')
eleP4 = skimmedTree.__getattr__('eleP4')
eleIsPassLoose = skimmedTree.__getattr__('eleIsPassLoose')
eleIsPassMedium = skimmedTree.__getattr__('eleIsPassMedium')
eleIsPassTight = skimmedTree.__getattr__('eleIsPassTight')
eleCharge = skimmedTree.__getattr__('eleCharge')
nMu = skimmedTree.__getattr__('nMu')
muP4 = skimmedTree.__getattr__('muP4')
isLooseMuon = skimmedTree.__getattr__('isLooseMuon')
isMediumMuon = skimmedTree.__getattr__('isMediumMuon')
isTightMuon = skimmedTree.__getattr__('isTightMuon')
muChHadIso = skimmedTree.__getattr__('muChHadIso')
muNeHadIso = skimmedTree.__getattr__('muNeHadIso')
muGamIso = skimmedTree.__getattr__('muGamIso')
muPUPt = skimmedTree.__getattr__('muPUPt')
muCharge = skimmedTree.__getattr__('muCharge')
nTau = skimmedTree.__getattr__('HPSTau_n')
tauP4 = skimmedTree.__getattr__('HPSTau_4Momentum')
isDecayModeFinding = skimmedTree.__getattr__('disc_decayModeFinding')
passLooseTauIso = skimmedTree.__getattr__(
'disc_byLooseIsolationMVA3oldDMwLT')
isData = skimmedTree.__getattr__('isData')
mcWeight = skimmedTree.__getattr__('mcWeight')
pu_nTrueInt = skimmedTree.__getattr__('pu_nTrueInt') #int()
# print skimmedTree.__getattr__('pu_nTrueInt')
# print pu_nTrueInt
# print
nGenPar = skimmedTree.__getattr__('nGenPar')
genParId = skimmedTree.__getattr__('genParId')
genMomParId = skimmedTree.__getattr__('genMomParId')
genParSt = skimmedTree.__getattr__('genParSt')
genParP4 = skimmedTree.__getattr__('genParP4')
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# MC Weights ----------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
mcweight[0] = 0.0
if isData == 1: mcweight[0] = 1.0
if not isData:
if mcWeight < 0: mcweight[0] = -1.0
if mcWeight > 0: mcweight[0] = 1.0
h_total.Fill(1.)
h_total_mcweight.Fill(1., mcweight[0])
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## Trigger selection
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
itrig_ = 0
trig1 = False
trig2 = False
trig3 = False
trig4 = False
trig5 = False
trig6 = False
trig7 = False
trig8 = False
trig9 = False
trig10 = False
trig11 = False
trig12 = False
trig1 = CheckFilter(trigName, trigResult,
'HLT_PFMET170_') # added from monojet
trig2 = CheckFilter(trigName, trigResult, 'HLT_PFMET170_NoiseCleaned')
trig3 = CheckFilter(trigName, trigResult,
'HLT_PFMET170_JetIdCleaned_v')
trig4 = CheckFilter(trigName, trigResult, 'HLT_PFMET170_HBHECleaned_v')
trig5 = CheckFilter(trigName, trigResult,
'HLT_PFMETNoMu90_PFMHTNoMu90_IDTight_v')
trig6 = CheckFilter(trigName, trigResult,
'HLT_PFMETNoMu100_PFMHTNoMu100_IDTight_v'
) #added from tt+DM all hadronic analysis
trig7 = CheckFilter(trigName, trigResult,
'HLT_PFMETNoMu110_PFMHTNoMu110_IDTight_v')
trig8 = CheckFilter(trigName, trigResult,
'HLT_PFMETNoMu120_PFMHTNoMu120_IDTight_v')
trig9 = CheckFilter(trigName, trigResult, 'HLT_PFMET110_PFMHT110_')
trig10 = CheckFilter(
trigName, trigResult,
'HLT_IsoMu24_v') #added from tt+DM all hadronic analysis
trig11 = CheckFilter(
trigName, trigResult,
'HLT_IsoTkMu24_v') #added from tt+DM all hadronic analysis
trig12 = CheckFilter(
trigName, trigResult,
'HLT_Ele27_WPTight_Gsf') #added from Siew Yan slides
# trig13 = CheckFilter(trigName, trigResult, 'HLT_IsoMu20') #Added from AN CR
trig13 = CheckFilter(
trigName, trigResult,
'HLT_IsoMu24') #Instead of IsoMu20 which is absent era E onwards
trig14 = CheckFilter(trigName, trigResult,
'HLT_Ele27_WPLoose_Gsf') #Added from AN CR
# print list(trigName)
# print [bool(i) for i in list(trigResult)]
# print ievent
# for itrig in range(len(list(trigResult))):
# if bool(list(trigResult)[itrig]): print list(trigName)[itrig]
# if 'HLT_IsoMu20' in list(trigName):
# print 'HLT_IsoMu20'
# if 'HLT_Ele27_WPLoose_Gsf' in list(trigName):
# print 'HLT_Ele27_WPLoose_Gsf'
# print list(trigName)
# for itr in list(trigName):
# if itr.find('IsoMu')!=-1: print itr
## if itr.find('HLT_Ele27_WPLoose_Gsf')!=-1: print itr
### print (trig13,trig14)
# print
# if not isData:
# trigstatus = False # triggers are not required for MC
# if isData:
# trigstatus = trig1 | trig2 | trig3 | trig4 | trig5 | trig6 | trig7 | trig8 | trig9 | trig10 | trig11 | trig12 #to include data with above triggers
# if not isData:
# if trigstatus == True : continue
trigstatus = trig1 | trig2 | trig3 | trig4 | trig5 | trig6 | trig7 | trig8 | trig9 | trig10 | trig11 | trig12 | trig13 | trig14
if not trigstatus: continue #Currently doing this for both MC and data
for itrig in range(len(list(trigName))):
st_trigName.push_back(list(trigName)[itrig])
st_trigResult.push_back(bool(list(trigResult)[itrig]))
# print (isData,trigstatus)
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## Filter selection
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
filterstatus = False
filter1 = False
filter2 = False
filter3 = False
filter4 = False
filter5 = False
filter6 = False
ifilter_ = 0
filter1 = CheckFilter(filterName, filterResult, 'Flag_HBHENoiseFilter')
filter2 = CheckFilter(filterName, filterResult,
'Flag_globalTightHalo2016Filter')
filter3 = CheckFilter(filterName, filterResult, 'Flag_eeBadScFilter')
filter4 = CheckFilter(filterName, filterResult, 'Flag_goodVertices')
filter5 = CheckFilter(filterName, filterResult,
'Flag_EcalDeadCellTriggerPrimitiveFilter')
filter6 = True #Flag_HBHENoiseIsoFilter
if not isData:
filterstatus = True
if isData:
filterstatus = filter1 & filter2 & filter3 & filter4 & filter5 & filter6
if filterstatus == False: continue
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## PFMET Selection
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# if samplename=="all":
pfmetstatus = (pfMet > 200.0)
# if pfmetstatus == False : continue
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
thinjetpassindex = []
nBjets = 0
for ithinjet in range(nTHINJets):
j1 = thinjetP4[ithinjet]
#if (j1.Pt() > 30.0)&(abs(j1.Eta())<2.4)&(bool(passThinJetLooseID[ithinjet])==True)&(bool(passThinJetPUID[ithinjet]) == True):
if (j1.Pt() > 30.0) & (abs(j1.Eta()) < 2.4) & (bool(
passThinJetLooseID[ithinjet]) == True):
thinjetpassindex.append(ithinjet)
if thinJetCSV[ithinjet] > CSVMWP: nBjets += 1
# print ('njet: ',len(thinjetpassindex))
# if len(thinjetpassindex) < 1 : continue
# print nBjets
# if nBjets < 1: continue
thindCSVjetpassindex = []
ndBjets = 0
try:
for jthinjet in range(nTHINdeepCSVJets):
j1 = thindeepCSVjetP4[jthinjet]
#if (j1.Pt() > 30.0)&(abs(j1.Eta())<2.4)&(bool(passThinJetLooseID[ithinjet])==True)&(bool(passThinJetPUID[ithinjet]) == True):
if (j1.Pt() > 30.0) & (abs(j1.Eta()) < 2.4) & (bool(
passThinJetLooseID[jthinjet]) == True):
thindCSVjetpassindex.append(jthinjet)
if thinJetdeepCSV[jthinjet] > DCSVMWP: ndBjets += 1
if len(thinjetpassindex) < 1 and len(thindCSVjetpassindex) < 1:
continue
except:
if len(thinjetpassindex) < 1: continue
# print ('njet: ',len(thinjetpassindex))
# if len(thindCSVjetpassindex) < 1 : continue
# print nBjets
# if nBjets < 1: continue
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## Electron Veto
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
myEles = []
for iele in range(nEle):
if (eleP4[iele].Pt() > 10.) & (abs(eleP4[iele].Eta()) < 2.5) & (
bool(eleIsPassLoose[iele]) == True):
myEles.append(iele)
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## Muon Veto
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
myMuos = []
for imu in range(nMu):
if (muP4[imu].Pt() > 10.) & (abs(muP4[imu].Eta()) < 2.4) & (bool(
isLooseMuon[imu]) == True):
relPFIso = (muChHadIso[imu] + max(
0., muNeHadIso[imu] + muGamIso[imu] -
0.5 * muPUPt[imu])) / muP4[imu].Pt()
if relPFIso < 0.25:
myMuos.append(imu)
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
## Tau Veto
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
# ----------------------------------------------------------------------------------------------------------------------------------------------------------------
myTaus = []
for itau in range(nTau):
if (tauP4[itau].Pt() > 18.) & (abs(tauP4[itau].Eta()) < 2.3) & (
bool(isDecayModeFinding[itau]) == True) & (bool(
passLooseTauIso[itau]) == True):
myTaus.append(itau)
st_runId[0] = long(run)
st_lumiSection[0] = lumi
st_eventId[0] = event
# print '-----------'+str(st_runId)+", "+str(st_lumiSection)+", "+str(st_eventId)
st_pfMetCorrPt[0] = pfMet
st_pfMetCorrPhi[0] = pfMetPhi
st_isData[0] = isData
st_HLT_PFMETNoMu90_PFMHTNoMu90_IDTight_v[0] = trig5
st_HLT_PFMETNoMu120_PFMHTNoMu120_IDTight_v[0] = trig8
st_HLT_IsoMu20[0] = trig13
st_HLT_Ele27_WPLoose_Gsf[0] = trig14
st_THINjetP4.clear()
st_THINjetCISVV2.clear()
st_THINjetHadronFlavor.clear()
st_THINjetNHadEF.clear()
st_THINjetCHadEF.clear()
st_AK4deepCSVjetP4.clear()
st_AK4deepCSVjetDeepCSV_b.clear()
st_eleP4.clear()
st_muP4.clear()
st_muChHadIso.clear()
st_muGamIso.clear()
st_muNeHadIso.clear()
st_HPSTau_4Momentum.clear()
st_genParId.clear()
st_genMomParId.clear()
st_genParSt.clear()
st_genParP4.clear()
st_THINnJet[0] = len(thinjetpassindex)
for ithinjet in thinjetpassindex:
st_THINjetP4.push_back(thinjetP4[ithinjet])
st_THINjetCISVV2.push_back(thinJetCSV[ithinjet])
st_THINjetHadronFlavor.push_back(THINjetHadronFlavor[ithinjet])
st_THINjetNHadEF.push_back(thinjetNhadEF[ithinjet])
st_THINjetCHadEF.push_back(thinjetChadEF[ithinjet])
try:
st_AK4deepCSVnJet[0] = len(thindCSVjetpassindex)
for ithinjet in thindCSVjetpassindex:
st_AK4deepCSVjetP4.push_back(thindeepCSVjetP4[ithinjet])
st_AK4deepCSVjetDeepCSV_b.push_back(thinJetdeepCSV[ithinjet])
except:
pass
st_nEle[0] = len(myEles)
for iele in myEles:
st_eleP4.push_back(eleP4[iele])
st_eleIsPassLoose.push_back(bool(eleIsPassLoose[iele]))
st_eleIsPassMedium.push_back(bool(eleIsPassMedium[iele]))
st_eleIsPassTight.push_back(bool(eleIsPassTight[iele]))
st_nMu[0] = len(myMuos)
for imu in myMuos:
st_muP4.push_back(muP4[imu])
st_isLooseMuon.push_back(bool(isLooseMuon[imu]))
st_isTightMuon.push_back(bool(isTightMuon[imu]))
st_isMediumMuon.push_back(bool(isMediumMuon[imu]))
st_muChHadIso.push_back(muChHadIso[imu])
st_muNeHadIso.push_back(muNeHadIso[imu])
st_muGamIso.push_back(muGamIso[imu])
st_muPUPt.push_back(muPUPt[imu])
st_HPSTau_n[0] = len(myTaus)
for itau in myTaus:
st_HPSTau_4Momentum.push_back(tauP4[itau])
st_pu_nTrueInt[0] = pu_nTrueInt
# print pu_nTrueInt
# print st_pu_nTrueInt[0]
st_nGenPar[0] = nGenPar
for igp in range(nGenPar):
st_genParId.push_back(genParId[igp])
st_genMomParId.push_back(genMomParId[igp])
st_genParSt.push_back(genParSt[igp])
st_genParP4.push_back(genParP4[igp])
## Fill variables for the CRs.
WenuRecoil[0] = -1.0
Wenumass[0] = -1.0
WenuPhi[0] = -10.
WmunuRecoil[0] = -1.0
Wmunumass[0] = -1.0
WmunuPhi[0] = -1.0
ZeeMass[0] = -1.0
ZeeRecoil[0] = -1.0
ZeePhi[0] = -10.
ZmumuMass[0] = -1.0
ZmumuRecoil[0] = -1.0
ZmumuPhi[0] = -10.
TOPRecoil[0] = -1.0
TOPPhi[0] = -10.
## for dielectron
if len(myEles) >= 2:
# ele1 = myEles[0]
# ele2 = myEles[1]
# p4_ele1 = eleP4[ele1]
# p4_ele2 = eleP4[ele2]
for iele1 in myEles:
p4_ele1 = eleP4[iele1]
for iele2 in myEles:
if iele2 > iele1 and eleCharge[iele1] * eleCharge[
iele2] < 0:
p4_ele2 = eleP4[iele2]
ee_mass = (p4_ele1 + p4_ele2).M()
zeeRecoilPx = -(pfMet * math.cos(pfMetPhi) -
p4_ele1.Px() - p4_ele2.Px())
zeeRecoilPy = -(pfMet * math.sin(pfMetPhi) -
p4_ele1.Py() - p4_ele2.Py())
ZeeRecoilPt = math.sqrt(zeeRecoilPx * zeeRecoilPx +
zeeRecoilPy * zeeRecoilPy)
if ee_mass > 70.0 and ee_mass < 110.0 and ZeeRecoilPt > 200.:
ZeeRecoil[0] = ZeeRecoilPt
ZeeMass[0] = ee_mass
ZeePhi[0] = arctan(-zeeRecoilPx, -zeeRecoilPy)
break
# ee_mass = ( p4_ele1 + p4_ele2 ).M()
#
# #if not ( (ee_mass > 70.0 ) & (ee_mass < 110.0) ): continue
# if not ( eleCharge[ele1] * eleCharge[ele2] > 0 ) :
# zeeRecoilPx = -( pfMet*math.cos(pfMetPhi) - p4_ele1.Px() - p4_ele2.Px())
# zeeRecoilPy = -( pfMet*math.sin(pfMetPhi) - p4_ele1.Py() - p4_ele2.Py())
# ZeeRecoil[0] = math.sqrt(zeeRecoilPx * zeeRecoilPx + zeeRecoilPy*zeeRecoilPy)
# ZeeMass[0] = ee_mass
## hardrecoil cut for ZJETS sample
# if samplename == "ZJETS":
# ZeeRecoilstatus =(ZeeRecoil > 200)
# print(samplename,ZeeRecoilstatus)
# if ZeeRecoilstatus == False : continue
## for dimu
if len(myMuos) >= 2:
# mu1 = myMuos[0]
# mu2 = myMuos[1]
# p4_mu1 = muP4[mu1]
# p4_mu2 = muP4[mu2]
#
# mumu_mass = ( p4_mu1 + p4_mu2 ).M()
#
# #if not ( (mumu_mass > 70.0 ) & (mumu_mass < 110.0) ): continue
# if not ( muCharge[mu1] * muCharge[mu2] > 0 ) :
# zmumuRecoilPx = -( pfMet*math.cos(pfMetPhi) - p4_mu1.Px() - p4_mu2.Px())
# zmumuRecoilPy = -( pfMet*math.sin(pfMetPhi) - p4_mu1.Py() - p4_mu2.Py())
# ZmumuRecoil[0] = math.sqrt(zmumuRecoilPx * zmumuRecoilPx + zmumuRecoilPy*zmumuRecoilPy)
# ZmumuMass[0] = mumu_mass
for imu1 in myMuos:
p4_mu1 = muP4[imu1]
for imu2 in myMuos:
if imu2 > imu1 and muCharge[imu1] * muCharge[imu2] < 0:
p4_mu2 = muP4[imu2]
mumu_mass = (p4_mu1 + p4_mu2).M()
zmumuRecoilPx = -(pfMet * math.cos(pfMetPhi) -
p4_mu1.Px() - p4_mu2.Px())
zmumuRecoilPy = -(pfMet * math.sin(pfMetPhi) -
p4_mu1.Py() - p4_mu2.Py())
ZmumuRecoilPt = math.sqrt(
zmumuRecoilPx * zmumuRecoilPx +
zmumuRecoilPy * zmumuRecoilPy)
if mumu_mass > 70.0 and mumu_mass < 110.0 and ZmumuRecoilPt > 200.:
ZmumuRecoil[0] = ZmumuRecoilPt
ZmumuMass[0] = mumu_mass
ZeePhi[0] = arctan(-zmumuRecoilPx, -zmumuRecoilPy)
break
## hardrecoil cut for ZJETS sample
# if samplename == "ZJETS":
if len(myEles) >= 2:
ZRecoilstatus = (ZeeRecoil[0] > 200)
elif len(myMuos) >= 2:
ZRecoilstatus = (ZmumuRecoil[0] > 200)
else:
ZRecoilstatus = False
# print(samplename,ZRecoilstatus)
# if ZRecoilstatus == False : continue
## for Single electron
if len(myEles) == 1:
ele1 = myEles[0]
p4_ele1 = eleP4[ele1]
e_mass = MT(
p4_ele1.Pt(), pfMet, DeltaPhi(p4_ele1.Phi(), pfMetPhi)
) #transverse mass defined as sqrt{2pT*MET*(1-cos(dphi)}
#if not ( (e_mass > 50.0 ) & (e_mass < 160.0) ): continue
WenuRecoilPx = -(pfMet * math.cos(pfMetPhi) - p4_ele1.Px())
WenuRecoilPy = -(pfMet * math.sin(pfMetPhi) - p4_ele1.Py())
WenuRecoilPt = math.sqrt(WenuRecoilPx * WenuRecoilPx +
WenuRecoilPy * WenuRecoilPy)
if WenuRecoilPt > 200.:
WenuRecoil[0] = WenuRecoilPt
Wenumass[0] = e_mass
WenuPhi[0] = arctan(-WenuRecoilPx, -WenuRecoilPy)
## hardrecoil cut for WJETS sample
# if samplename == "WJETS":
# WenuRecoilstatus =(WenuRecoil > 200)
# print(samplename,WenuRecoilstatus)
# if WenuRecoilstatus == False : continue
## for Single muon
if len(myMuos) == 1:
mu1 = myMuos[0]
p4_mu1 = muP4[mu1]
mu_mass = MT(
p4_mu1.Pt(), pfMet, DeltaPhi(p4_mu1.Phi(), pfMetPhi)
) #transverse mass defined as sqrt{2pT*MET*(1-cos(dphi)}
#if not ( (mu_mass > 50.0 ) & (mu_mass < 160.0) ): continue
WmunuRecoilPx = -(pfMet * math.cos(pfMetPhi) - p4_mu1.Px())
WmunuRecoilPy = -(pfMet * math.sin(pfMetPhi) - p4_mu1.Py())
WmunuRecoilPt = math.sqrt(WmunuRecoilPx * WmunuRecoilPx +
WmunuRecoilPy * WmunuRecoilPy)
if WmunuRecoilPt > 200.:
WmunuRecoil[0] = WmunuRecoilPt
Wmunumass[0] = mu_mass
WmunuPhi[0] = arctan(-WmunuRecoilPx, -WmunuRecoilPy)
## hardrecoil cut for WJETS sample
# if samplename == "WJETS":
if len(myEles) == 1:
WRecoilstatus = (WenuRecoil[0] > 200)
elif len(myMuos) == 1:
WRecoilstatus = (WmunuRecoil[0] > 200)
else:
WRecoilstatus = False
# print(samplename,WRecoilstatus)
# if WRecoilstatus == False : continue
## for Single electron && Single Muon
if len(myEles) >= 1 and len(myMuos) >= 1:
# ele1 = myEles[0]
# p4_ele1 = eleP4[ele1]
# mu1 = myMuos[0]
# p4_mu1 = muP4[mu1]
#
# #e_mass = MT(p4_ele1.Pt(),pfMet, DeltaPhi(p4_ele1.Phi(),pfMetPhi)) #transverse mass defined as sqrt{2pT*MET*(1-cos(dphi)}
# #mu_mass = MT(p4_mu1.Pt(),pfMet, DeltaPhi(p4_mu1.Phi(),pfMetPhi))
# #if not ( (e_mass > 50.0 ) & (e_mass < 160.0) ): continue
#
# TOPenumunuRecoilPx = -( pfMet*math.cos(pfMetPhi) - p4_mu1.Px() -p4_ele1.Px())
# TOPenumunuRecoilPy = -( pfMet*math.sin(pfMetPhi) - p4_mu1.Py() -p4_ele1.Py())
# TOPRecoil[0] = math.sqrt(TOPenumunuRecoilPx * TOPenumunuRecoilPx + TOPenumunuRecoilPy*TOPenumunuRecoilPy)
for iele in myEles:
p4_ele1 = eleP4[iele]
for imu in myMuos:
p4_mu1 = muP4[imu]
TOPenumunuRecoilPx = -(pfMet * math.cos(pfMetPhi) -
p4_mu1.Px() - p4_ele1.Px())
TOPenumunuRecoilPy = -(pfMet * math.sin(pfMetPhi) -
p4_mu1.Py() - p4_ele1.Py())
TOPenumunuRecoilPt = math.sqrt(
TOPenumunuRecoilPx * TOPenumunuRecoilPx +
TOPenumunuRecoilPy * TOPenumunuRecoilPy)
if TOPenumunuRecoilPt > 200:
TOPRecoil[0] = TOPenumunuRecoilPt
TOPPhi[0] = arctan(-TOPenumunuRecoilPx,
-TOPenumunuRecoilPy)
break
TOPRecoilstatus = (TOPRecoil[0] > 200)
if pfmetstatus == False and ZRecoilstatus == False and WRecoilstatus == False and TOPRecoilstatus == False:
continue
# if ZRecoilstatus:
# print ('Z: ',nEle, nMu, ZeeMass[0], ZmumuMass[0])
# if WRecoilstatus:
# print ('W: ', Wenumass[0], Wmunumass[0])
# if TOPRecoilstatus:
# print ('T: ',nEle, nMu, TOPenumunuRecoilPt)
outTree.Fill()
h_total_mcweight.Write()
h_total.Write()
samplepath.Write()
outfile.Write()
def tag(self, name, content):
named = TNamed(name, content)
oldDir = gDirectory
self.file.cd()
named.Write()
oldDir.cd()
def __init__(self, key, value):
"""Initialize a string value."""
TNamed.__init__(self, key, value)
# Declare the file
file_Output_S = TFile(
"%s_VFAT%s_ID_%s_ScurveOutput.root" %
(TestName, pos, port), "RECREATE", "", 1)
dir_S_ChipID = file_Output_S.mkdir("ChipID")
dir_S_Thresholds = file_Output_S.mkdir("Thresholds")
dir_S_TrimDACValues = file_Output_S.mkdir("TrimDACValues")
dir_S_SCurveMeanByChan = file_Output_S.mkdir(
"SCurveMeanByChannel")
dir_S_SCurveSigma = file_Output_S.mkdir("SCurvesSigma")
dir_S_SCurveByChan = file_Output_S.mkdir("SCurveByChannel")
dir_S_SCurveExample = file_Output_S.mkdir("SCurveExample")
dir_S_SCurveSeparation = file_Output_S.mkdir(
"SCurveSeparation")
chipID = TNamed("VFAT%s" % (pos), str(port))
dir_A_ChipID.cd()
chipID.Write()
dir_S_ChipID.cd()
chipID.Write()
Canvas = TCanvas()
#Number of the example channel for which the SCURVE and its fit are printed.
SCUVRE = 15
# build a rectangle in axes coords
VCALmean14 = [
] #to plot VCal means for one channel (SCUVRE) for all chips
VCALcov14 = [
] #to plot VCal covs for one channel (SCUVRE) for all chips
Threshold_2 = False
def main(argv):
print("=======================================")
print("LAT started:",time.strftime('%X %x %Z'))
startT = time.clock()
# gROOT.ProcessLine("gErrorIgnoreLevel = 3001;") # suppress ROOT error messages
global batMode
intMode, batMode, rangeMode, fileMode, gatMode, singleMode, pathMode, cutMode = False, False, False, False, False, False, False, False
dontUseTCuts = False
dsNum, subNum, runNum, plotNum = -1, -1, -1, 1
pathToInput, pathToOutput, manualInput, manualOutput, customPar = ".", ".", "", "", ""
if len(argv)==0: return
for i,opt in enumerate(argv):
if opt == "-r":
rangeMode, dsNum, subNum = True, int(argv[i+1]), int(argv[i+2])
print("Scanning DS-%d sub-range %d" % (dsNum, subNum))
if opt == "-p":
pathMode, manualInput, manualOutput = True, argv[i+1], argv[i+2]
print("Manually set input/output files:\nInput: %s\nOutput: %s" % (manualInput, manualOutput))
if opt == "-d":
pathToInput, pathToOutput = argv[i+1], argv[i+2]
print("Custom paths: Input %s, Output %s" % (pathToInput,pathToOutput))
if opt == "-f":
fileMode, dsNum, runNum = True, int(argv[i+1]), int(argv[i+2])
print("Scanning DS-%d, run %d" % (dsNum, runNum))
if opt == "-g":
gatMode, runNum = True, int(argv[i+1])
print("GATDataSet mode. Scanning run %d" % (runNum))
if opt == "-s":
singleMode, pathToInput = True, argv[i+1]
print("Single file mode. Scanning {}".format(pathToInput))
if opt == "-i":
intMode, plotNum = True, int(argv[i+1])
print("Interactive mode selected. Use \"p\" for previous and \"q\" to exit.")
if opt == "-x":
dontUseTCuts = True
print("DC TCuts deactivated. Retaining all events ...")
if opt == "-c":
cutMode, customPar = True, str(argv[i+1])
print("Using custom cut parameter: {}".format(customPar))
if opt == "-b":
batMode = True
import matplotlib
# if os.environ.get('DISPLAY','') == '':
# print('No display found. Using non-interactive Agg backend')
matplotlib.use('Agg')
print("Batch mode selected. A new file will be created.")
import matplotlib.pyplot as plt
from matplotlib import gridspec
import matplotlib.ticker as mtick
plt.style.use('pltTalks.mplstyle')
from matplotlib.colors import LogNorm, Normalize
# File I/O
inFile, outFile, bltFile = TFile(), TFile(), TFile()
gatTree, bltTree, out = TTree(), TTree(), TTree()
theCut, inPath, outPath = "", "", ""
# Set input and output files
if rangeMode:
inPath = "%s/waveSkimDS%d_%d.root" % (pathToInput, dsNum, subNum)
outPath = "%s/latSkimDS%d_%d.root" % (pathToOutput, dsNum, subNum)
if fileMode:
inPath = "%s/waveSkimDS%d_run%d.root" % (pathToInput, dsNum, runNum)
outPath = "%s/latSkimDS%d_run%d.root" % (pathToOutput, dsNum, runNum)
if pathMode:
inPath, outPath = manualInput, manualOutput
if gatMode:
ds = GATDataSet()
gatPath = ds.GetPathToRun(runNum,GATDataSet.kGatified)
bltPath = ds.GetPathToRun(runNum,GATDataSet.kBuilt)
outPath = "%s/lat_run%d.root" % (pathToOutput, runNum)
if pathMode and gatMode:
outPath = manualOutput
# Initialize trees
if rangeMode or fileMode or pathMode:
inFile = TFile(inPath)
gatTree = inFile.Get("skimTree")
print(gatTree.GetEntries(),"entries in input tree.")
elif gatMode:
inFile = TFile(gatPath)
bltFile = TFile(bltPath)
gatTree = inFile.Get("mjdTree")
bltTree = bltFile.Get("MGTree")
gatTree.AddFriend(bltTree)
if singleMode:
inFile = TFile(pathToInput)
gatTree = inFile.Get("skimTree")
# apply cut to tree
if (rangeMode or fileMode or pathMode) and not dontUseTCuts:
try:
theCut = inFile.Get("theCut").GetTitle()
except ReferenceError:
theCut = ""
if cutMode:
# theCut += customPar
# theCut = "(channel==672 || channel==674) && mH==2" # sync chan: 672, extp chan: 674
# theCut += " && fitSlo < 10"
# theCut = "trapENFCal > 1 && trapENFCal < 10 && riseNoise > 2"
theCut = "trapENFCal > 20 && trapENFCal < 100 && riseNoise > 2"
print("WARNING: Custom cut in use! : ",theCut)
gatTree.Draw(">>elist", theCut, "entrylist")
elist = gDirectory.Get("elist")
gatTree.SetEntryList(elist)
nList = elist.GetN()
print("Using cut:\n",theCut)
print("Found",gatTree.GetEntries(),"input entries.")
print("Found",nList,"entries passing cuts.")
# Output: In batch mode (-b) only, create an output file+tree & append new branches.
if batMode and not intMode:
outFile = TFile(outPath, "RECREATE")
print("Attempting tree copy to",outPath)
out = gatTree.CopyTree("")
out.Write()
print("Wrote",out.GetEntries(),"entries.")
cutUsed = TNamed("theCut",theCut)
cutUsed.Write()
waveS1, waveS2 = std.vector("double")(), std.vector("double")()
waveS3, waveS4, waveS5 = std.vector("double")(), std.vector("double")(), std.vector("double")()
bcMax, bcMin = std.vector("double")(), std.vector("double")()
bandMax, bandTime = std.vector("double")(), std.vector("double")()
den10, den50, den90 = std.vector("double")(), std.vector("double")(), std.vector("double")()
oppie = std.vector("double")()
fitMu, fitAmp, fitSlo = std.vector("double")(), std.vector("double")(), std.vector("double")()
fitTau, fitBL = std.vector("double")(), std.vector("double")()
matchMax, matchWidth, matchTime = std.vector("double")(), std.vector("double")(), std.vector("double")()
pol0, pol1, pol2, pol3 = std.vector("double")(), std.vector("double")(), std.vector("double")(), std.vector("double")()
fails, fitChi2, fitLL = std.vector("int")(), std.vector("double")(), std.vector("double")()
riseNoise = std.vector("double")()
t0_SLE, t0_ALE, lat, latF = std.vector("double")(), std.vector("double")(), std.vector("double")(), std.vector("double")()
latAF, latFC, latAFC = std.vector("double")(), std.vector("double")(), std.vector("double")()
nMS = std.vector("int")()
tE50, latE50, wfStd = std.vector("double")(), std.vector("double")(), std.vector("double")()
wfAvgBL, wfRMSBL = std.vector("double")(), std.vector("double")()
fitErr = std.vector("int")()
# It's not possible to put the "out.Branch" call into a class initializer (waveLibs::latBranch). You suck, ROOT.
b1, b2 = out.Branch("waveS1",waveS1), out.Branch("waveS2",waveS2)
b3, b4, b5 = out.Branch("waveS3",waveS3), out.Branch("waveS4",waveS4), out.Branch("waveS5",waveS5)
b7, b8 = out.Branch("bcMax",bcMax), out.Branch("bcMin",bcMin)
b9, b10 = out.Branch("bandMax",bandMax), out.Branch("bandTime",bandTime)
b11, b12, b13 = out.Branch("den10",den10), out.Branch("den50",den50), out.Branch("den90",den90)
b14 = out.Branch("oppie",oppie)
b15, b16, b17 = out.Branch("fitMu", fitMu), out.Branch("fitAmp", fitAmp), out.Branch("fitSlo", fitSlo)
b18, b19 = out.Branch("fitTau",fitTau), out.Branch("fitBL",fitBL)
b20, b21, b22 = out.Branch("matchMax", matchMax), out.Branch("matchWidth", matchWidth), out.Branch("matchTime", matchTime)
b23, b24, b25, b26 = out.Branch("pol0", pol0), out.Branch("pol1", pol1), out.Branch("pol2", pol2), out.Branch("pol3", pol3)
b27, b28, b29 = out.Branch("fails",fails), out.Branch("fitChi2",fitChi2), out.Branch("fitLL",fitLL)
b30 = out.Branch("riseNoise",riseNoise)
b31, b32, b33, b34 = out.Branch("t0_SLE",t0_SLE), out.Branch("t0_ALE",t0_ALE), out.Branch("lat",lat), out.Branch("latF",latF)
b35, b36, b37 = out.Branch("latAF",latAF), out.Branch("latFC",latFC), out.Branch("latAFC",latAFC)
b38 = out.Branch("nMS",nMS)
b39, b40, b41 = out.Branch("tE50", tE50), out.Branch("latE50", latE50), out.Branch("wfStd", wfStd)
b42, b43 = out.Branch("wfAvgBL", wfAvgBL), out.Branch("wfRMSBL", wfRMSBL)
b44 = out.Branch("fitErr",fitErr)
# make a dictionary that can be iterated over (avoids code repetition in the loop)
brDict = {
"waveS1":[waveS1, b1], "waveS2":[waveS2, b2],
"waveS3":[waveS3, b3], "waveS4":[waveS4, b4], "waveS5":[waveS5, b5],
"bcMax":[bcMax, b7], "bcMin":[bcMin, b8],
"bandMax":[bandMax, b9], "bandTime":[bandTime, b10],
"den10":[den10, b11], "den50":[den50, b12], "den90":[den90, b13],
"oppie":[oppie, b14],
"fitMu":[fitMu, b15], "fitAmp":[fitAmp, b16], "fitSlo":[fitSlo, b17],
"fitTau":[fitTau, b18], "fitBL":[fitBL,b19],
"matchMax":[matchMax, b20], "matchWidth":[matchWidth, b21], "matchTime":[matchTime, b22],
"pol0":[pol0, b23], "pol1":[pol1, b24], "pol2":[pol2, b25], "pol3":[pol3, b26],
"fails":[fails,b27], "fitChi2":[fitChi2,b28], "fitLL":[fitLL,b29],
"riseNoise":[riseNoise,b30],
"t0_SLE":[t0_SLE,b31], "t0_ALE":[t0_ALE,b32], "lat":[lat,b33], "latF":[latF,b34],
"latAF":[latAF,b35], "latFC":[latFC,b36], "latAFC":[latAFC,b37],
"nMS":[nMS,b38], "tE50":[tE50,b39], "latE50":[latE50,b40], "wfStd":[wfStd,b41],
"wfAvgBL":[wfAvgBL,b42], "wfRMSBL":[wfRMSBL,b43],
"fitErr":[fitErr,b44]
}
# Make a figure (-i option: select different plots)
# fig = plt.figure(figsize=(12,9), facecolor='w')
fig = plt.figure()
if plotNum==0 or plotNum==7 or plotNum==8:
p0 = plt.subplot(111) # 0-raw waveform, 7-new trap filters
elif plotNum==1 or plotNum==2:
p0 = plt.subplot(211) # 1-wavelet, 2-time points, bandpass filters, tail slope
p1 = plt.subplot(212)
elif plotNum==3:
p0 = plt.subplot2grid((2,5), (0,0), colspan=3) # oppie / freq-domain matched filter
p1 = plt.subplot2grid((2,5), (0,3), colspan=2)
p2 = plt.subplot2grid((2,5), (1,0), colspan=3)
elif plotNum==4:
p0 = plt.subplot(111) # time-domain matched filter
elif plotNum==5:
p0 = plt.subplot(111) # bandpass / bandTime
elif plotNum==6:
p0 = plt.subplot2grid((6,10), (0,0), colspan=10, rowspan=3) # waveform fit
p1 = plt.subplot2grid((6,10), (3,0), colspan=10, rowspan=1) # residual
p2 = plt.subplot2grid((6,10), (4,0), colspan=2, rowspan=2) # traces
p3 = plt.subplot2grid((6,10), (4,2), colspan=2, rowspan=2)
p4 = plt.subplot2grid((6,10), (4,4), colspan=2, rowspan=2)
p5 = plt.subplot2grid((6,10), (4,6), colspan=2, rowspan=2)
p6 = plt.subplot2grid((6,10), (4,8), colspan=2, rowspan=2)
elif plotNum==9:
p0 = plt.subplot2grid((5,1), (0,0)) # 9- wpt on wf fit residual
p1 = plt.subplot2grid((5,1), (1,0), rowspan=2)
p2 = plt.subplot2grid((5,1), (3,0), rowspan=2)
if not batMode: plt.show(block=False)
# Load a fast signal template - used w/ the freq-domain matched filter
# print("Generating signal template ...")
tSamp, tR, tZ, tAmp, tST, tSlo = 5000, 0, 15, 100, 2500, 10
# tOrig, tOrigTS = wl.MakeSiggenWaveform(tSamp,tR,tZ,tAmp,tST,tSlo) # Damn you to hell, PDSF
templateFile = np.load("%s/data/lat_template.npz" % os.environ['LATDIR'])
if dsNum==2 or dsNum==6: templateFile = np.load("%s/data/lat_ds2template.npz" % os.environ['LATDIR'])
tOrig, tOrigTS = templateFile['arr_0'], templateFile['arr_1']
# Load stuff from DS1 forced acq. runs
npzfile = np.load("%s/data/fft_forcedAcqDS1.npz" % os.environ['LATDIR'])
noise_asd, noise_xFreq, avgPwrSpec, xPwrSpec, data_forceAcq, data_fft = npzfile['arr_0'],npzfile['arr_1'],npzfile['arr_2'],npzfile['arr_3'],npzfile['arr_4'],npzfile['arr_5']
# Loop over events
print("Starting event loop ...")
iList = -1
while True:
iList += 1
if intMode==True and iList != 0:
value = input()
if value=='q': break # quit
if value=='p': iList -= 2 # go to previous
if (value.isdigit()):
iList = int(value) # go to entry number
elif intMode==False and batMode==False:
plt.pause(0.00001) # rapid-draw mode
if iList >= nList: break # bail out, goose!
entry = gatTree.GetEntryNumber(iList);
gatTree.LoadTree(entry)
gatTree.GetEntry(entry)
nChans = gatTree.channel.size()
event = MGTEvent()
if gatMode: event = bltTree.event
# Reset all branch vectors
# NOTE: The events sometimes contain 'straggler' hits that do not pass the
# given TCut. This line sets ALL the new parameters to -88888 by default.
# If you see this value in a plot, then you must be including hits that
# passed the cut in wave-skim but did not pass the (different?) cut in LAT.
for key in brDict: brDict[key][0].assign(nChans,-88888)
brDict["fails"][0].assign(nChans,0) # set error code to 'true' by default
errorCode = [0,0,0,0]
# Loop over hits passing cuts
numPass = gatTree.Draw("channel",theCut,"GOFF",1,iList)
chans = gatTree.GetV1()
chanList = list(set(int(chans[n]) for n in range(numPass)))
hitList = (iH for iH in range(nChans) if gatTree.channel.at(iH) in chanList) # a 'generator expression'
for iH in hitList:
# ------------------------------------------------------------------------
# Waveform processing
# load data
run = gatTree.run
chan = gatTree.channel.at(iH)
dataENFCal = gatTree.trapENFCal.at(iH)
dataENM = gatTree.trapENM.at(iH)
dataTSMax = gatTree.trapENMSample.at(iH)*10. - 4000
wf = MGTWaveform()
iEvent = 0
if gatMode:
wf = event.GetWaveform(iH)
iEvent = entry
else:
wf = gatTree.MGTWaveforms.at(iH)
iEvent = gatTree.iEvent
# print("%d: run %d chan %d trapENFCal %.2f" % (iList, run, chan, dataENFCal))
# be absolutely sure you're matching the right waveform to this hit
if wf.GetID() != chan:
print("ERROR -- Vector matching failed. iList %d run %d iEvent %d" % (iList,run,iEvent))
return
# Let's start the show - grab a waveform.
# Remove first 4 samples when we have multisampling
# Remove last 2 samples to get rid of the ADC spike at the end of all wf's.
truncLo, truncHi = 0, 2
if dsNum==6 or dsNum==2: truncLo = 4
signal = wl.processWaveform(wf,truncLo,truncHi)
data = signal.GetWaveRaw()
data_blSub = signal.GetWaveBLSub()
dataTS = signal.GetTS()
dataBL,dataNoise = signal.GetBaseNoise()
# wavelet packet transform
wp = pywt.WaveletPacket(data_blSub, 'db2', 'symmetric', maxlevel=4)
nodes = wp.get_level(4, order='freq')
wpCoeff = np.array([n.data for n in nodes],'d')
wpCoeff = abs(wpCoeff)
# wavelet parameters
# First get length of wavelet on the time axis, the scale axis will always be the same
# due to the number of levels in the wavelet
wpLength = len(wpCoeff[1,:])
waveS1[iH] = np.sum(wpCoeff[0:1,1:wpLength//4+1]) # python3 : floor division (//) returns an int
waveS2[iH] = np.sum(wpCoeff[0:1,wpLength//4+1:wpLength//2+1])
waveS3[iH] = np.sum(wpCoeff[0:1,wpLength//2+1:3*wpLength//4+1])
waveS4[iH] = np.sum(wpCoeff[0:1,3*wpLength//4+1:-1])
waveS5[iH] = np.sum(wpCoeff[2:-1,1:-1])
S6 = np.sum(wpCoeff[2:9,1:wpLength//4+1])
S7 = np.sum(wpCoeff[2:9,wpLength//4+1:wpLength//2+1])
S8 = np.sum(wpCoeff[2:9,wpLength//2+1:3*wpLength//4+1])
S9 = np.sum(wpCoeff[2:9,3*wpLength//4+1:-1])
S10 = np.sum(wpCoeff[9:,1:wpLength//4+1])
S11 = np.sum(wpCoeff[9:,wpLength//4+1:wpLength//2+1])
S12 = np.sum(wpCoeff[9:,wpLength//2+1:3*wpLength//4+1])
S13 = np.sum(wpCoeff[9:,3*wpLength//4+1:-1])
sumList = [S6, S7, S8, S9, S10, S11, S12, S13]
bcMax[iH] = np.max(sumList)
bcMin[iH] = 1. if np.min(sumList) < 1 else np.min(sumList)
# reconstruct waveform w/ only lowest frequency.
new_wp = pywt.WaveletPacket(data=None, wavelet='db2', mode='symmetric')
new_wp['aaa'] = wp['aaa'].data
data_wlDenoised = new_wp.reconstruct(update=False)
# resize in a smart way
diff = len(data_wlDenoised) - len(data_blSub)
if diff > 0: data_wlDenoised = data_wlDenoised[diff:]
# waveform high/lowpass filters - parameters are a little arbitrary
B1,A1 = butter(2, [1e5/(1e8/2),1e6/(1e8/2)], btype='bandpass')
data_bPass = lfilter(B1, A1, data_blSub)
# used in the multisite tagger
B2, A2 = butter(1, 0.08)
data_filt = filtfilt(B2, A2, data_blSub)
data_filtDeriv = wl.wfDerivative(data_filt)
filtAmp = np.amax(data_filtDeriv) # scale the max to match the amplitude
data_filtDeriv = data_filtDeriv * (dataENM / filtAmp)
B3, A3 = butter(2,1e6/(1e8/2), btype='lowpass')
data_lPass = lfilter(B3, A3, data_blSub)
idx = np.where((dataTS > dataTS[0]+100) & (dataTS < dataTS[-1]-100))
windowingOffset = dataTS[idx][0] - dataTS[0]
bandMax[iH] = np.amax(data_bPass[idx])
bandTime[iH] = dataTS[ np.argmax(data_bPass[idx])] - windowingOffset
# timepoints of low-pass waveforms
tpc = MGWFTimePointCalculator();
tpc.AddPoint(.2)
tpc.AddPoint(.5)
tpc.AddPoint(.9)
mgtLowPass = wl.MGTWFFromNpArray(data_lPass)
tpc.FindTimePoints(mgtLowPass)
den10[iH] = tpc.GetFromStartRiseTime(0)*10
den50[iH] = tpc.GetFromStartRiseTime(1)*10
den90[iH] = tpc.GetFromStartRiseTime(2)*10
# ================ xgauss waveform fitting ================
amp, mu, sig, tau, bl = dataENM, dataTSMax, 600., -72000., dataBL
floats = np.asarray([amp, mu, sig, tau, bl])
temp = xgModelWF(dataTS, floats)
if not batMode: MakeTracesGlobal()
# get the noise of the denoised wf
denoisedNoise,_,_ = wl.baselineParameters(data_wlDenoised)
# NOTE: fit is to wavelet-denoised data, BECAUSE there are no HF components in the model,
# AND we'll still calculate fitChi2 w/r/t the data, not the denoised data.
# datas = [dataTS, data, dataNoise] # fit data
datas = [dataTS, data_wlDenoised + dataBL, denoisedNoise] # fit wavelet-denoised data w/ Bl added back in
# Set bounds - A,mu,sig,tau,bl.
# bnd = ((None,None),(None,None),(None,None),(None,None),(None,None)) # often gets caught at sig=0
bnd = ((None,None),(None,None),(2.,None),(-72001.,-71999.),(None,None)) # gets caught much less often.
# L-BGFS-B with numerical gradient.
start = time.clock()
result = op.minimize(lnLike, floats, args=datas, method="L-BFGS-B", options=None, bounds=bnd)
fitSpeed = time.clock() - start
fitErr[iH] = 0
if not result["success"]:
# print("fit fail: ", result["message"])
fitErr[iH] = 1
errorCode[0] = 1
amp, mu, sig, tau, bl = result["x"]
# save parameters
fitMu[iH], fitAmp[iH], fitSlo[iH], fitTau[iH], fitBL[iH] = mu, amp, sig, tau, bl
floats = np.asarray([amp, mu, sig, tau, bl])
fit = xgModelWF(dataTS, floats)
# print("%d/%d iH %d e %-10.2f fs %-8.2f f %d" % (iList, nList, iH, dataENFCal, fitSlo[iH], fitErr[iH]))
# log-likelihood of this fit
fitLL[iH] = result["fun"]
# chi-square of this fit
# Textbook is (observed - expected)^2 / expected,
# but we'll follow MGWFCalculateChiSquare.cc and do (observed - expected)^2 / NDF.
# NOTE: we're doing the chi2 against the DATA, though the FIT is to the DENOISED DATA.
fitChi2[iH] = np.sum(np.square(data-fit)) / (len(data)-1)/dataNoise
# get wavelet coeff's for rising edge only. normalize to bcMin
# view this w/ plot 1
# find the window of rising edge
fit_blSub = fit - bl
fitMaxTime = dataTS[np.argmax(fit_blSub)]
fitStartTime = dataTS[0]
idx = np.where(fit_blSub < 0.1)
if len(dataTS[idx] > 0): fitStartTime = dataTS[idx][-1]
fitRiseTime50 = (fitMaxTime + fitStartTime)/2.
# bcMin is 32 samples long in the x-direction.
# if we make the window half as wide, it'll have the same # of coeff's as bcMin.
# this is still 'cheating' since we're not summing over the same rows.
numXRows = wpCoeff.shape[1]
wpCtrRise = int((fitRiseTime50 - dataTS[0]) / (dataTS[-1] - dataTS[0]) * numXRows)
wpLoRise = wpCtrRise - 8
if wpLoRise < 0: wpLoRise = 0
wpHiRise = wpCtrRise + 8
if wpHiRise > numXRows: wpHiRise = numXRows
# sum all HF wavelet components for this edge.
riseNoise[iH] = np.sum(wpCoeff[2:-1,wpLoRise:wpHiRise]) / bcMin[iH]
# print("%d %d %d %d e %-5.2f bmax %-6.2f bmin %-6.2f mu %-5.2f a %-5.2f s %-5.2f bl %-5.2f rn %.2f" % (run,iList,iH,chan,dataENFCal,bcMax[iH],bcMin[iH],fitMu[iH],fitAmp[iH],fitSlo[iH],fitBL[iH],riseNoise[iH]))
# =========================================================
# optimal matched filter (freq. domain)
# we use the pysiggen fast template (not the fit result) to keep this independent of the wf fitter.
# pull in the template, shift it, and make sure it's the same length as the data
guessTS = tOrigTS - 15000.
idx = np.where((guessTS > -5) & (guessTS < dataTS[-1]))
guessTS, guess = guessTS[idx], tOrig[idx]
if len(guess)!=len(data):
if len(guess)>len(data):
guess, guessTS = guess[0:len(data)], guessTS[0:len(data)]
else:
guess = np.pad(guess, (0,len(data)-len(guess)), 'edge')
guessTS = np.pad(guessTS, (0,len(data)-len(guessTS)), 'edge')
data_fft = np.fft.fft(data_blSub) # can also try taking fft of the low-pass data
temp_fft = np.fft.fft(guess)
datafreq = np.fft.fftfreq(data.size) * 1e8
power_vec = np.interp(datafreq, noise_xFreq, noise_asd) # load power spectra from file
# Apply the filter
optimal = data_fft * temp_fft.conjugate() / power_vec
optimal_time = 2 * np.fft.ifft(optimal)
# Normalize the output
df = np.abs(datafreq[1] - datafreq[0]) # freq. bin size
sigmasq = 2 * (temp_fft * temp_fft.conjugate() / power_vec).sum() * df
sigma = np.sqrt(np.abs(sigmasq))
SNR = abs(optimal_time) / (sigma)
oppie[iH] = np.amax(SNR)
# time-domain matched filter. use the baseline-subtracted wf as data, and fit_blSub too.
# make a longer best-fit waveform s/t it can be shifted L/R.
matchTS = np.append(dataTS, np.arange(dataTS[-1], dataTS[-1] + 20000, 10)) # add 2000 samples
match = xgModelWF(matchTS, [amp, mu+10000., sig, tau, bl]) # shift mu accordingly
match = match[::-1] - bl # time flip and subtract off bl
# line up the max of the 'match' (flipped wf) with the max of the best-fit wf
# this kills the 1-1 matching between matchTS and dataTS (each TS has some offset)
matchMaxTime = matchTS[np.argmax(match)]
matchTS = matchTS + (fitMaxTime - matchMaxTime)
# resize match, matchTS to have same # samples as data, dataTS.
# this is the only case we really care about
# ("too early" and "too late" also happen, but the shift is larger than the trigger walk, making it unphysical)
if matchTS[0] <= dataTS[0] and matchTS[-1] >= dataTS[-1]:
idx = np.where((matchTS >= dataTS[0]) & (matchTS <= dataTS[-1]))
match, matchTS = match[idx], matchTS[idx]
sizeDiff = len(dataTS)-len(matchTS)
if sizeDiff < 0:
match, matchTS = match[:sizeDiff], matchTS[:sizeDiff]
elif sizeDiff > 0:
match = np.hstack((match, np.zeros(sizeDiff)))
matchTS = np.hstack((matchTS, dataTS[-1*sizeDiff:]))
if len(match) != len(data):
print("FIXME: match filter array manip is still broken.")
# compute match filter parameters
matchMax[iH], matchWidth[iH], matchTime[iH] = -888, -888, -888
if len(match)==len(data):
smoothMF = gaussian_filter(match * data_blSub, sigma=5.)
matchMax[iH] = np.amax(smoothMF)
matchTime[iH] = matchTS[ np.argmax(smoothMF) ]
idx = np.where(smoothMF > matchMax[iH]/2.)
if len(matchTS[idx]>1):
matchWidth[iH] = matchTS[idx][-1] - matchTS[idx][0]
# Fit tail slope to polynomial. Guard against fit fails
idx = np.where(dataTS >= fitMaxTime)
tail, tailTS = data[idx], dataTS[idx]
popt1,popt2 = 0,0
try:
popt1,_ = op.curve_fit(wl.tailModelPol, tailTS, tail)
pol0[iH], pol1[iH], pol2[iH], pol3[iH] = popt1[0], popt1[1], popt1[2], popt1[3]
except:
# print("curve_fit tailModelPol failed, run %i event %i channel %i" % (run, iList, chan))
errorCode[2] = 1
pass
# =========================================================
# new trap filters.
# params: t0_SLE, t0_ALE, lat, latF, latAF, latFC, latAFC
# calculate trapezoids
# standard trapezoid - prone to walking, less sensitive to noise. use to find energy
eTrap = wl.trapFilter(data_blSub, 400, 250, 7200.)
eTrapTS = np.arange(0, len(eTrap)*10., 10)
eTrapInterp = interpolate.interp1d(eTrapTS, eTrap)
# short trapezoid - triggers more quickly, sensitive to noise. use to find t0
sTrap = wl.trapFilter(data_blSub, 100, 150, 7200.)
sTrapTS = np.arange(0, len(sTrap)*10., 10)
# asymmetric trapezoid - used to find the t0 only
aTrap = wl.asymTrapFilter(data_blSub, 4, 10, 200, True) # (0.04us, 0.1us, 2.0us)
aTrapTS = np.arange(0, len(aTrap)*10., 10)
# find leading edges (t0 times)
# limit the range from 0 to 10us, and use an ADC threshold of 1.0 as suggested by DCR
t0_SLE[iH],_ = wl.walkBackT0(sTrap, eTrapTS[-1]+7000-4000-2000, 1., 0, 1000) # (in ns) finds leading edge from short trap
t0_ALE[iH],_ = wl.walkBackT0(aTrap, eTrapTS[-1]+7000-4000-2000, 1., 0, 1000) # (in ns) finds leading edge from asymmetric trap
# standard energy trapezoid w/ a baseline padded waveform
data_pad = np.pad(data_blSub,(200,0),'symmetric')
pTrap = wl.trapFilter(data_pad, 400, 250, 7200.)
pTrapTS = np.linspace(0, len(pTrap)*10, len(pTrap))
pTrapInterp = interpolate.interp1d(pTrapTS, pTrap)
# calculate energy parameters
# standard amplitude. basically trapEM, but w/o NL correction if the input WF doesn't have it.
lat[iH] = np.amax(eTrap)
# Calculate DCR suggested amplitude, using the 50% to the left and right of the maximum point
t0_F50,t0fail1 = wl.walkBackT0(pTrap, thresh=lat[iH]*0.5, rmin=0, rmax=len(pTrap)-1)
t0_B50,t0fail2 = wl.walkBackT0(pTrap, thresh=lat[iH]*0.5, rmin=0, rmax=len(pTrap)-1, forward=True)
t0_E50 = (t0_F50 + t0_B50)/2.0
#TODO -- if it's necessary due to the trigger walk, we could potentially add a way to recursively increase the threshold until a timepoint is found, however it will still always fail for most noise events
if not t0fail1 or not t0fail2:
latE50[iH] = 0 # Set amplitude to 0 if one of the evaluations failed
else:
latE50[iH] = pTrapInterp(t0_E50) # Maybe I should call this latDCR50 to confuse people
tE50[iH] = t0_B50 - t0_F50 # Save the difference between the middle points, can be used as a cut later
# standard amplitude with t0 from the shorter traps
# If either fixed pickoff time (t0) is < 0, use the first sample as the amplitude (energy).
latF[iH] = eTrapInterp( np.amax([t0_SLE[iH]-7000+4000+2000, 0.]) ) # This should be ~trapEF
latAF[iH] = eTrapInterp( np.amax([t0_ALE[iH]-7000+4000+2000, 0.]) )
# amplitude from padded trapezoid, with t0 from short traps and a correction function
# function is under development. currently: f() = exp(p0 + p1*E), p0 ~ 7.8, p1 ~ -0.45 and -0.66
# functional walk back distance is *either* the minimum of the function value, or 5500 (standard value)
# t0_corr = -7000+6000+2000 # no correction
t0_corr = -7000+6000+2000 - np.amin([np.exp(7.8 - 0.45*lat[iH]),1000.])
t0A_corr = -7000+6000+2000 - np.amin([np.exp(7.8 - 0.66*lat[iH]),1000.])
latFC[iH] = pTrapInterp( np.amax([t0_SLE[iH] + t0_corr, 0.]) )
latAFC[iH] = pTrapInterp( np.amax([t0_ALE[iH] + t0A_corr, 0.]) )
# =========================================================
# the genius multisite event tagger - plot 8
# decide a threshold
dIdx = np.argmax(data_filtDeriv)
dMax = data_filtDeriv[dIdx]
dRMS,_,_ = wl.baselineParameters(data_filtDeriv)
# msThresh = np.amax([dMax * .2, dRMS * 5.])
# msThresh = dMax * .15
msThresh = 50. # I don't know. this seems like a good value
# run peak detect algorithm
maxtab,_ = wl.peakdet(data_filtDeriv, msThresh)
# profit
msList = []
for iMax in range(len(maxtab)):
idx = int(maxtab[iMax][0])
val = maxtab[iMax][1]
msList.append(dataTS[idx])
# print("%d idx %d TS %d val %.2f thresh %.2f" % (iList, idx, dataTS[idx], val, msThresh))
nMS[iH] = len(maxtab)
# =========================================================
# wfStd analysis
wfAvgBL[iH] = dataBL
wfRMSBL[iH] = dataNoise
wfStd[iH] = np.std(data[5:-5])
# ------------------------------------------------------------------------
# End waveform processing.
# Calculate error code
fails[iH] = 0
for i,j in enumerate(errorCode):
if j==1: fails[iH] += int(j)<<i
# print("fails:",fails[iH])
# Make plots!
if batMode: continue
if plotNum==0: # raw data
p0.cla()
p0.plot(dataTS,data,'b')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f" % (run,iList,chan,dataENFCal))
p0.set_xlabel("Time (ns)", ha='right', x=1.)
p0.set_ylabel("Voltage (ADC)", ha='right', y=1.)
if plotNum==1: # wavelet plot
p0.cla()
p0.margins(x=0)
p0.plot(dataTS,data_blSub,color='blue',label='data (%.2f keV)' % dataENFCal)
p0.plot(dataTS,data_wlDenoised,color='cyan',label='denoised',alpha=0.7)
p0.axvline(fitRiseTime50,color='green',label='fit 50%',linewidth=2)
p0.plot(dataTS,fit_blSub,color='red',label='bestfit',linewidth=2)
# p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f flo %.0f fhi %.0f fhi-flo %.0f" % (run,iList,chan,dataENFCal,fitStartTime,fitMaxTime,fitMaxTime-fitStartTime))
p0.legend(loc='best')
p0.set_xlabel("Time (ns)", ha='right', x=1.)
p0.set_ylabel("Voltage (ADC)", ha='right', y=1.)
p1.cla()
p1.imshow(wpCoeff, interpolation='nearest', aspect="auto", origin="lower",extent=[0, 1, 0, len(wpCoeff)],cmap='viridis')
p1.axvline(float(wpLoRise)/numXRows,color='orange',linewidth=2)
p1.axvline(float(wpHiRise)/numXRows,color='orange',linewidth=2)
# p1.set_title("waveS5 %.2f bcMax %.2f bcMin %.2f riseNoise %.2f" % (waveS5[iH], bcMax[iH], bcMin[iH], riseNoise[iH]))
# p1.set_xlabel("Time (%wf)", ha='right', x=1.)
p1.set_ylabel("WPT Coefficients", ha='right', y=1.)
if plotNum==2: # time points, bandpass filters, tail slope
p0.cla()
p0.plot(dataTS,data,color='blue',label='data')
p0.axvline(den10[iH],color='black',label='lpTP')
p0.axvline(den50[iH],color='black')
p0.axvline(den90[iH],color='black')
p0.plot(dataTS,fit,color='magenta',label='bestfit')
if errorCode[2]!=1: p0.plot(tailTS, wl.tailModelPol(tailTS, *popt1), color='orange',linewidth=2, label='tailPol')
p0.legend(loc='best')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f" % (run,iEvent,chan,dataENFCal))
p1.cla()
p1.plot(dataTS,data_lPass,color='blue',label='lowpass')
p1.plot(dataTS,data_filtDeriv,color='green',label='filtDeriv')
p1.plot(dataTS,data_filt,color='black',label='filtfilt')
p1.plot(dataTS,data_bPass,color='red',label='bpass')
p1.axvline(bandTime[iH],color='orange',label='bandTime')
p1.legend(loc='best')
if plotNum==3: # freq-domain matched filter
p0.cla()
p0.plot(dataTS,data,'b')
p0.plot(dataTS,temp,'r')
p0.plot(dataTS,fit,color='cyan')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f" % (run,iEvent,chan,dataENFCal))
data_asd, data_xFreq = plt.psd(data, Fs=1e8, NFFT=2048, pad_to=2048, visible=False)
temp_asd, temp_xFreq = plt.psd(temp, Fs=1e8, NFFT=2048, pad_to=2048, visible=False)
p1.cla()
p1.loglog(data_xFreq, np.sqrt(data_asd), 'b')
p1.loglog(noise_xFreq, np.sqrt(noise_asd), 'g')
p1.loglog(temp_xFreq, np.sqrt(temp_asd), 'r')
p1.set_xlabel('Frequency (Hz)')
p1.set_ylabel('ASD')
p1.grid('on')
p2.cla()
p2.plot(dataTS, SNR)
p2.set_title('oppie %.1f' % (oppie[iH]))
p2.set_xlabel('Offset time (s)')
p2.set_ylabel('SNR')
if plotNum==4: # time domain match filter plot
p0.cla()
p0.plot(dataTS,data_blSub,color='blue',label='data',alpha=0.7)
p0.plot(dataTS,fit_blSub,color='red',label='bestfit',linewidth=3)
p0.axvline(matchTime[iH],color='orange',label='matchTime',linewidth=2)
p0.plot(matchTS,smoothMF,color='magenta',label='smoothMF',linewidth=3)
p0.plot(matchTS,match,color='cyan',label='match',linewidth=3)
p0.set_xlabel('Time (s)')
p0.set_ylabel('Voltage (arb)')
p0.legend(loc='best')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f matchMax %.2f matchTime %.2f matchWidth %.2f" % (run,iEvent,chan,dataENFCal,matchMax[iH],matchTime[iH],matchWidth[iH]))
if plotNum==5: # bandTime plot
p0.cla()
p0.plot(dataTS,data_blSub,color='blue',label='data',alpha=0.7)
p0.plot(dataTS,data_lPass,color='magenta',label='lowpass',linewidth=4)
p0.plot(dataTS,data_bPass,color='red',label='bpass',linewidth=4)
p0.axvline(bandTime[iH],color='orange',label='bandTime',linewidth=4)
p0.legend(loc='best')
p0.set_xlabel('Time (ns)')
p0.set_ylabel('ADC (arb)')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f" % (run,iEvent,chan,dataENFCal))
if plotNum==6: # waveform fit plot
p0.cla()
p0.plot(dataTS,data,color='blue',label='data')
# p0.plot(dataTS,data_wlDenoised,color='cyan',label='wlDenoised',alpha=0.5)
p0.plot(dataTS,temp,color='orange',label='xgauss guess')
p0.plot(dataTS,fit,color='red',label='xgauss fit')
p0.set_title("Run %d evt %d chan %d trapENFCal %.1f trapENM %.1f deltaBL %.1f\n amp %.2f mu %.2f sig %.2f tau %.2f chi2 %.2f spd %.3f" % (run,iList,chan,dataENFCal,dataENM,dataBL-bl,amp,mu,sig,tau,fitChi2[iH],fitSpeed))
p0.legend(loc='best')
p1.cla()
p1.plot(dataTS,data-fit,color='blue',label='residual')
p1.legend(loc='best')
p2.cla()
p2.plot(ampTr[1:],label='amp',color='red')
p2.legend(loc='best')
p3.cla()
p3.plot(muTr[1:],label='mu',color='green')
p3.legend(loc='best')
p4.cla()
p4.plot(sigTr[1:],label='sig',color='blue')
p4.yaxis.set_major_formatter(mtick.FormatStrFormatter('%.1e'))
p4.legend(loc='best')
p5.cla()
p5.plot(tauTr[1:],label='tau',color='black')
p5.legend(loc='best')
p6.cla()
p6.plot(blTr[1:],label='bl',color='magenta')
p6.legend(loc='best')
print(gatTree.fitSlo.at(iH), sig)
if plotNum==7: # new traps plot
p0.cla()
p0.plot(dataTS, data_blSub, color='blue', label='data')
p0.plot(sTrapTS, sTrap, color='red', label='sTrap')
p0.axvline(t0_SLE[iH], color='red')
p0.plot(aTrapTS, aTrap, color='orange', label='aTrap')
p0.axvline(t0_ALE[iH], color='orange')
p0.plot(eTrapTS, eTrap, color='green', label='eTrap')
p0.axhline(lat[iH],color='green')
p0.plot(pTrapTS, pTrap, color='magenta', label='pTrap')
p0.axhline(latAFC[iH], color='magenta')
p0.axhline(latE50[iH], color='cyan')
p0.set_title("trapENFCal %.2f trapENM %.2f || latEM %.2f latEF %.2f latEAF %.2f latEFC %.2f latEAFC %.2f latE50 %.2f" % (dataENFCal,dataENM,lat[iH],latF[iH],latAF[iH],latFC[iH],latAFC[iH], latE50[iH]))
p0.legend(loc='best')
if plotNum==8: # multisite tag plot
p0.cla()
p0.plot(dataTS, data_blSub, color='blue', label='data')
p0.plot(dataTS, data_filtDeriv, color='red', label='filtDeriv')
for mse in msList: p0.axvline(mse, color='green')
p0.axhline(msThresh,color='red')
p0.legend()
if plotNum==9: # wavelet vs wf fit residual plot
# wavelet packet transform on wf fit residual
fitResid = data-fit
wpRes = pywt.WaveletPacket(fitResid, 'db2', 'symmetric', maxlevel=4)
nodesRes = wpRes.get_level(4, order='freq')
wpCoeffRes = np.array([n.data for n in nodesRes], 'd')
wpCoeffRes = abs(wpCoeffRes)
R6 = np.sum(wpCoeffRes[2:9,1:wpLength//4+1])
R7 = np.sum(wpCoeffRes[2:9,wpLength//4+1:wpLength//2+1])
R8 = np.sum(wpCoeffRes[2:9,wpLength//2+1:3*wpLength//4+1])
R9 = np.sum(wpCoeffRes[2:9,3*wpLength//4+1:-1])
R10 = np.sum(wpCoeffRes[9:,1:wpLength//4+1])
R11 = np.sum(wpCoeffRes[9:,wpLength//4+1:wpLength//2+1])
R12 = np.sum(wpCoeffRes[9:,wpLength//2+1:3*wpLength//4+1])
R13 = np.sum(wpCoeffRes[9:,3*wpLength//4+1:-1])
RsumList = [R6, R7, R8, R9, R10, R11, R12, R13]
bcMinRes = 1. if np.min(RsumList) < 1 else np.min(RsumList)
riseNoiseRes = np.sum(wpCoeffRes[2:-1,wpLoRise:wpHiRise]) / bcMinRes
rnCut = 1.1762 + 0.00116 * np.log(1 + np.exp((dataENFCal-7.312)/0.341))
p0.cla()
p0.margins(x=0)
p0.plot(dataTS,data_blSub,color='blue',label='data')
# p0.plot(dataTS,data_wlDenoised,color='cyan',label='denoised',alpha=0.7)
# p0.axvline(fitRiseTime50,color='green',label='fit 50%',linewidth=2)
p0.plot(dataTS,fit_blSub,color='red',label='bestfit',linewidth=2)
# p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f flo %.0f fhi %.0f fhi-flo %.0f" % (run,iList,chan,dataENFCal,fitStartTime,fitMaxTime,fitMaxTime-fitStartTime))
# p0.legend(loc='best')
p0.set_title("Run %d Entry %d Channel %d ENFCal %.2f flo %.0f fhi %.0f fhi-flo %.0f approxFitE %.2f" % (run,iList,chan,dataENFCal,fitStartTime,fitMaxTime,fitMaxTime-fitStartTime,fitAmp[iH]*0.4))
p1.cla()
p1.plot(dataTS,fitResid,color='blue')
p2.cla()
p2.set_title("riseNoise %.2f rnCut %.2f riseNoiseRes %.2f bcMinRes %.2f bcMin %.2f max %.2f" % (riseNoise[iH],rnCut,riseNoiseRes,bcMinRes,bcMin[iH],wpCoeffRes.max()))
p2.imshow(wpCoeffRes, interpolation='nearest', aspect="auto", origin="lower",extent=[0, 1, 0, len(wpCoeff)],cmap='viridis')
plt.tight_layout()
plt.pause(0.000001)
# ------------------------------------------------------------------------
# End loop over hits, fill branches
if batMode:
for key in brDict:
brDict[key][1].Fill()
if iList%5000 == 0 and iList!=0:
out.Write("",TObject.kOverwrite)
print("%d / %d entries saved (%.2f %% done), time: %s" % (iList,nList,100*(float(iList)/nList),time.strftime('%X %x %Z')))
# End loop over events
if batMode and not intMode:
out.Write("",TObject.kOverwrite)
print("Wrote",out.GetBranch("channel").GetEntries(),"entries in the copied tree,")
print("and wrote",b1.GetEntries(),"entries in the new branches.")
stopT = time.clock()
print("Stopped:",time.strftime('%X %x %Z'),"\nProcess time (min):",(stopT - startT)/60)
print(float(nList)/((stopT-startT)/60.),"entries per minute.")
def main(argv):
# gROOT.ProcessLine("gErrorIgnoreLevel = 3001;") # suppress ROOT error messages
startT = time.clock()
print "Started:", time.strftime('%X %x %Z')
intMode, batMode, rangeMode, fileMode, dsNum, subNum, runNum = False, False, False, False, -1, -1, -1
for i, opt in enumerate(argv):
if opt == "-i":
intMode = True
print "Interactive mode selected. Use \"p\" for previous and \"q\" to exit."
if opt == "-r":
rangeMode = True
dsNum, subNum = int(argv[i + 1]), int(argv[i + 2])
print "Scanning DS-%d range %d" % (dsNum, subNum)
if opt == "-f":
fileMode = True
dsNum, runNum = int(argv[i + 1]), int(argv[i + 2])
if opt == "-b":
batMode = True
import matplotlib
if os.environ.get('DISPLAY', '') == '':
print('No display found. Using non-interactive Agg backend')
matplotlib.use('Agg')
print "Batch mode selected. A new file will be created."
import matplotlib.pyplot as plt
# Set file I/O and cuts
inFile = "./data/waveSkimDS4_test.root"
outFile = "./data/waveletSkimDS4_test.root"
if (rangeMode):
inFile = "~/project/v2-waveskim/waveSkimDS%d_%d.root" % (dsNum, subNum)
outFile = "~/project/v2-processwfs/waveletSkimDS%d_%d.root" % (dsNum,
subNum)
if (fileMode):
# inFile = "~/project/cal-wave-skim/waveSkimDS%d_run%d.root" % (dsNum,runNum)
# outFile = "~/project/cal-wavelet-skim/waveletSkimDS%d_run%d.root" % (dsNum,runNum)
inFile = "./waveSkimDS%d_run%d.root" % (dsNum, runNum)
outFile = "./waveletSkimDS%d_run%d.root" % (dsNum, runNum)
inputFile = TFile(inFile)
waveTree = inputFile.Get("skimTree")
print "Found", waveTree.GetEntries(), "input entries."
theCut = inputFile.Get("theCut").GetTitle()
# theCut = "trapENFCal > 0.8 && gain==0 && mHClean==1 && isGood && !muVeto && !isLNFill1 && !isLNFill2 && P!=0 && D!=0 && trapETailMin<0"
# theCut += " && Entry$ < 2000"
# theCut += " && trapENFCal > 20"
print "Using cut:\n", theCut, "\n"
print "Attempting entrylist draw ..."
waveTree.Draw(">>elist", theCut, "GOFF entrylist")
elist = gDirectory.Get("elist")
waveTree.SetEntryList(elist)
nList = elist.GetN()
print "Found", nList, "entries passing cuts."
# In batch mode ONLY, create an output file+tree & append new branches
outputFile = TFile()
outTree = TTree()
if (batMode == True):
outputFile = TFile(outFile, "RECREATE")
print "Attempting tree copy to", outFile
outTree = waveTree.CopyTree("")
outTree.Write()
print "Wrote", outTree.GetEntries(), "entries."
cutUsed = TNamed("cutUsedHere", theCut)
cutUsed.Write()
waveS0 = std.vector("double")()
waveS1 = std.vector("double")()
waveS2 = std.vector("double")()
waveS3 = std.vector("double")()
waveS4 = std.vector("double")()
waveS5 = std.vector("double")()
wpar4 = std.vector("double")()
waveEnt = std.vector("double")()
butterMax = std.vector("double")()
butterTime = std.vector("double")()
tOffset = std.vector("double")()
lastZeroTime = std.vector("double")()
pol0 = std.vector("double")()
pol1 = std.vector("double")()
pol2 = std.vector("double")()
pol3 = std.vector("double")()
exp0 = std.vector("double")()
exp1 = std.vector("double")()
rt10 = std.vector("double")()
rt20 = std.vector("double")()
rt50 = std.vector("double")()
rt90 = std.vector("double")()
bWaveS0 = outTree.Branch("waveS0", waveS0)
bWaveS1 = outTree.Branch("waveS1", waveS1)
bWaveS2 = outTree.Branch("waveS2", waveS2)
bWaveS3 = outTree.Branch("waveS3", waveS3)
bWaveS4 = outTree.Branch("waveS4", waveS4)
bWaveS5 = outTree.Branch("waveS5", waveS5)
bWPar4 = outTree.Branch("wpar4", wpar4)
bWaveEnt = outTree.Branch("waveEnt", waveEnt)
bButterMax = outTree.Branch("butterMax", butterMax)
bButterTime = outTree.Branch("butterTime", butterTime)
bTOffset = outTree.Branch("tOffset", tOffset)
bLastZeroTime = outTree.Branch("lastZeroTime", lastZeroTime)
bPol0 = outTree.Branch("pol0", pol0)
bPol1 = outTree.Branch("pol1", pol1)
bPol2 = outTree.Branch("pol2", pol2)
bPol3 = outTree.Branch("pol3", pol3)
bExp0 = outTree.Branch("exp0", exp0)
bExp1 = outTree.Branch("exp1", exp1)
bRt10 = outTree.Branch("rt10", rt10)
bRt20 = outTree.Branch("rt20", rt20)
bRt50 = outTree.Branch("rt50", rt50)
bRt90 = outTree.Branch("rt90", rt90)
# Make a figure
fig = plt.figure(figsize=(7, 7), facecolor='w')
p1 = plt.subplot(211)
p2 = plt.subplot(212)
if not batMode: plt.show(block=False)
# Begin loop over events
iList = -1
while True:
iList += 1
if intMode == True and iList != 0:
value = raw_input()
if value == 'q': break # quit
if value == 'p': iList -= 2 # go to previous
if (value.isdigit()):
iList = int(value) # go to entry number
elif intMode == False and batMode == False:
plt.pause(0.001) # rapid-draw mode
if iList >= nList: break # bail out, goose!
entry = waveTree.GetEntryNumber(iList)
waveTree.LoadTree(entry)
waveTree.GetEntry(entry)
nChans = waveTree.channel.size()
waveS1.assign(nChans, -999)
waveS0.assign(nChans, -999)
waveS1.assign(nChans, -999)
waveS2.assign(nChans, -999)
waveS3.assign(nChans, -999)
waveS4.assign(nChans, -999)
waveS5.assign(nChans, -999)
wpar4.assign(nChans, -999)
waveEnt.assign(nChans, -999)
butterMax.assign(nChans, -999)
butterTime.assign(nChans, -999)
tOffset.assign(nChans, -999)
lastZeroTime.assign(nChans, -999)
pol0.assign(nChans, -999)
pol1.assign(nChans, -999)
pol2.assign(nChans, -999)
pol3.assign(nChans, -999)
exp0.assign(nChans, -999)
exp1.assign(nChans, -999)
rt10.assign(nChans, -999)
rt20.assign(nChans, -999)
rt50.assign(nChans, -999)
rt90.assign(nChans, -999)
# Loop over hits passing cuts
numPass = waveTree.Draw("channel", theCut, "GOFF", 1, iList)
chans = waveTree.GetV1()
chanList = list(set(int(chans[n]) for n in xrange(numPass)))
hitList = (iH for iH in xrange(nChans)
if waveTree.channel.at(iH) in chanList
) # a 'generator expression'
for iH in hitList:
run = waveTree.run
iEvent = waveTree.iEvent
chan = waveTree.channel.at(iH)
energy = waveTree.trapENFCal.at(iH)
wf = waveTree.MGTWaveforms.at(iH)
startTime = waveTree.triggerTrapt0.at(iH)
blrwfFMR50 = waveTree.blrwfFMR50.at(iH)
if wf.GetID() != chan:
print "Warning!! Vector matching failed! iList %d run %d iEvent %d" % (
iList, run, iEvent)
break
signal = wl.processWaveform(wf, opt='full')
waveBLSub = signal.GetWaveBLSub()
waveFilt = signal.GetWaveFilt()
waveTS = signal.GetTS()
waveletYOrig, waveletYTrans = signal.GetWavelet()
# waveFTX, waveFTY, waveFTPow = signal.GetFourier()
# waveTrap = signal.GetTrapezoid()
# waveTrapF = signal.GetFiltTrapezoid()
# waveTrapX = np.linspace(0, len(waveTrap), num=len(waveTrap))
# _,waveletFilt = wl.waveletTransform(waveFilt,level=3) # testing other levels on the filtered WF
# Wavelet cut parameters
waveS0[iH] = np.sum(waveletYTrans[0:1, 1:-1])
waveS1[iH] = np.sum(waveletYTrans[0:1, 1:33])
waveS2[iH] = np.sum(waveletYTrans[0:1, 33:65])
waveS3[iH] = np.sum(waveletYTrans[0:1, 65:97])
waveS4[iH] = np.sum(waveletYTrans[0:1, 97:-1])
waveS5[iH] = np.sum(waveletYTrans[2:-1, 1:-1])
wpar4[iH] = np.amax(waveletYTrans[0:1, 1:-1])
# Waveform entropy parameters
d1 = 2. * np.multiply(
waveletYTrans[0:1, 1:65],
np.log(waveletYTrans[0:1, 1:65] / waveS0[iH] / 2.0))
d2 = np.multiply(waveletYTrans[0:1, 65:-1],
np.log(waveletYTrans[0:1, 65:-1] / waveS0[iH]))
waveEnt[iH] = np.abs(np.sum(d1)) + np.abs(np.sum(d2))
# Smoothed derivative params
waveFiltDeriv = wl.wfDerivative(waveFilt)
butterMax[iH] = np.amax(waveFiltDeriv)
butterTime[iH] = np.argmax(
waveFiltDeriv[100:]) * 10 + signal.GetOffset() + 1000
tOffset[iH] = signal.GetOffset()
# print "max %.3f ts %.0f ns offset %.0f ns" % (butterMax[iH], butterTime[iH], tOffset[iH])
# Make a super denoised waveform
wp = pywt.WaveletPacket(data=waveBLSub,
wavelet='haar',
mode='symmetric',
maxlevel=3)
new_wp = pywt.WaveletPacket(data=None,
wavelet='haar',
mode='symmetric')
new_wp['aaa'] = wp['aaa'].data
superDenoisedWF = new_wp.reconstruct(update=False)
mgtSDWF = wl.MGTWFFromNpArray(superDenoisedWF)
# Try to get start time by finding the super denoised last zero crossing
lastZero = 0
zeros = np.asarray(np.where(superDenoisedWF < 0.1))
if (zeros.size > 0): lastZero = zeros[0, -1]
lastZeroTime[iH] = waveTS[lastZero]
# Time point calculator
timePointCalc = MGWFTimePointCalculator()
timePointCalc.AddPoint(.1)
timePointCalc.AddPoint(.2)
timePointCalc.AddPoint(.5)
timePointCalc.AddPoint(.9)
timePointCalc.FindTimePoints(mgtSDWF)
rt10[iH] = timePointCalc.GetFromStartRiseTime(0) * 10
rt20[iH] = timePointCalc.GetFromStartRiseTime(1) * 10
rt50[iH] = timePointCalc.GetFromStartRiseTime(2) * 10
rt90[iH] = timePointCalc.GetFromStartRiseTime(3) * 10
# print "lastZero %.2f startTime %.2f 10 %.2f 20 %.2f 50 %.2f 90 %.2f" % (lastZeroTime[iH], startTime,rt10, rt20, rt50, rt90)
# Fit tail slope (2 methods). Guard against fit fails
idxMax = np.where(waveTS > rt90[iH]) # returns an array/tuple
idxMax = idxMax[0][0] # "cast" to int
tail, tailTS = waveBLSub[idxMax:], waveTS[idxMax:]
try:
popt1, _ = curve_fit(wl.tailModelPol, tailTS, tail)
pol0[iH], pol1[iH], pol2[iH], pol3[iH] = popt1[0], popt1[
1], popt1[2], popt1[3]
except:
pass
try:
popt2, _ = curve_fit(wl.tailModelExp,
tailTS,
tail,
p0=[energy, 72000])
exp0[iH], exp1[iH] = popt2[0], popt2[1]
except:
# print "curve_fit tailModelExp failed, run %i event %i channel %i" % (run, iList, chan)
pass
# Make a plot
if not batMode:
print "i %d run %d iEvent(i) %d iH(j+1) %d/%d chan %d energy %.2f bt %.2f" % (
iList, run, iEvent, iH + 1, nChans, chan, energy,
butterTime[iH])
# Waveform plot
p1.cla()
p1.plot(waveTS, waveBLSub, color='blue')
p1.plot(waveTS, superDenoisedWF, color='red')
p1.plot(tailTS, wl.tailModelPol(tailTS, *popt1), color='cyan')
p1.plot(tailTS,
wl.tailModelExp(tailTS, *popt2),
color='orange')
p1.set_xlabel("Time (ns)")
p1.set_ylabel("ADC")
p1.set_title(
"Run %d Ch %d Energy %.2f \n S5 %.2f (S3-S2)/E %.2f (S3-S4)/E %.2f"
% (run, chan, energy, waveS5[iH],
((waveS3[iH] - waveS2[iH]) / energy),
((waveS3[iH] - waveS4[iH]) / energy)))
# Wavelet plot
p2.cla()
p2.imshow(waveletYTrans,
interpolation='nearest',
aspect="auto",
origin="lower",
extent=[0, 1, 0, len(waveletYTrans)],
cmap='jet')
plt.tight_layout()
plt.subplots_adjust(hspace=.2, top=0.92)
plt.pause(0.00001)
# End loop over hits
if (batMode == True):
bWaveS0.Fill()
bWaveS1.Fill()
bWaveS2.Fill()
bWaveS3.Fill()
bWaveS4.Fill()
bWaveS5.Fill()
bWPar4.Fill()
bWaveEnt.Fill()
bButterMax.Fill()
bButterTime.Fill()
bTOffset.Fill()
bLastZeroTime.Fill()
bPol0.Fill()
bPol1.Fill()
bPol2.Fill()
bPol3.Fill()
bExp0.Fill()
bExp1.Fill()
bRt10.Fill()
bRt20.Fill()
bRt50.Fill()
bRt90.Fill()
if iList % 5000 == 0:
outTree.Write("", TObject.kOverwrite)
print "%d / %d entries saved (%.2f %% done)." % (
iList, nList, 100 * (float(iList) / nList))
# End loop over events
if (batMode == True):
outTree.Write("", TObject.kOverwrite)
print "Wrote", outTree.GetBranch(
"channel").GetEntries(), "entries in the copied tree,"
print "and wrote", bWaveS0.GetEntries(), "entries in the new branches."
stopT = time.clock()
print "Process time (min): ", (stopT - startT) / 60
def main():
EffName = "Eff"
WMMName = "MM"
# Bin Definitions
binHeader = "bindefs"
# binname = fluxmodel
binname = "bin0"
# ROOT Output
OutFile = "response_matrix.root"
# fout = ROOT.TFile(OutFile, "RECREATE")
fout = ROOT.TFile(OutFile, "UPDATE")
# Check if bin directory exists, quit if so, otherwise create it!
if ( not fout.GetDirectory(binname) ):
pdir = fout.mkdir(binname,"Bin number 0")
else:
fout.Close()
print("\n=========================\n")
errormessage = "Directory %s already exists!\nEither try another bin number or delete %s and start again. Exiting...\n"%(binname,OutFile)
raise ValueError(errormessage)
# Go to home of ROOT file
fout.cd(binname)
# formatted_df = pd.read_csv('../formatted-dataframe.csv')
formatted_df_outfile = os.path.join('/data/user/jbourbeau/composition/unfolding',
'unfolding-dataframe-PyUnfold-formatted.csv')
df_flux = pd.read_csv(formatted_df_outfile, index_col='log_energy_bin_idx')
counts = df_flux['counts'].values
res_mat_file = os.path.join('/data/user/jbourbeau/composition/unfolding',
'response.txt')
# res_mat_file = os.path.join('/data/user/jbourbeau/composition/unfolding',
# 'block_response.txt')
block_response = np.loadtxt(res_mat_file)
res_mat_err_file = os.path.join('/data/user/jbourbeau/composition/unfolding',
'response_err.txt')
# res_mat_err_file = os.path.join('/data/user/jbourbeau/composition/unfolding',
# 'block_response_err.txt')
block_response_err = np.loadtxt(res_mat_err_file)
cbins = len(counts)+1
carray = np.arange(cbins, dtype=float)
print('carray = {}'.format(carray))
print('cbins = {}'.format(cbins))
ebins = len(counts)+1
earray = np.arange(ebins, dtype=float)
print('earray = {}'.format(earray))
cbins -= 1
ebins -= 1
# Prepare Combined Weighted Histograms - To be Normalized by Model After Filling
# Isotropic Weights of Causes - For Calculating Combined Species Efficiency
Eff = TH1F("%s"%(EffName), 'Non-Normed Combined Efficiency', cbins, carray)
Eff.GetXaxis().SetTitle('Causes')
Eff.GetYaxis().SetTitle("Efficiency")
Eff.SetStats(0)
Eff.Sumw2()
# Isotropic Weighted Mixing Matrix - For Calculating Combined Species MM
WMM = TH2F("%s"%(WMMName), 'Weighted Combined Mixing Matrix',
cbins, carray, ebins, earray)
WMM.GetXaxis().SetTitle('Causes')
WMM.GetYaxis().SetTitle('Effects')
WMM.SetStats(0)
WMM.Sumw2()
# # Isotropic Weighted Mixing Matrix - For Calculating Combined Species MM
# ModelMM = TH2F("Model_%s"%(WMMName),'Model Weighted Combined Matrix',cbins,carray,ebins,earray)
# ModelMM.GetXaxis().SetTitle('Causes')
# ModelMM.GetYaxis().SetTitle('Effects')
# ModelMM.SetStats(0)
# ModelMM.Sumw2()
# Raw Number of Events in Each Bin
NMM = TH2F("NMM", 'Number of Events Matrix', cbins, carray, ebins, earray)
NMM.GetXaxis().SetTitle('Causes')
NMM.GetYaxis().SetTitle('Effects')
NMM.SetStats(0)
NMM.Sumw2()
throwArea = 1.
for ci in xrange(0,cbins):
# Calculate Flux-Weighted Efficiency
# Eval = Eff.GetBinContent(ci+1)/binwidth[ci]/throwArea
# dEval = Eff.GetBinError(ci+1)/binwidth[ci]/throwArea
dEval, Eval = 1, 1
Eff.SetBinContent(ci+1, Eval)
# Eff.SetBinError(ci+1, dEval)
# Normalize Species Probability Matrix
sum2 = 0
for ek in xrange(0,ebins):
# Calculate Flux-Weighted Mixing Matrix
# wmm_val = WMM.GetBinContent(ci+1,ek+1)/binwidth[ci]/throwArea
# dwmm_val = WMM.GetBinError(ci+1,ek+1)/binwidth[ci]/throwArea
# wmm_val, dwmm_val = block_response[ebins-ek-1][ci], block_response_err[ebins-ek-1][ci]
wmm_val, dwmm_val = block_response[ek][ci], block_response_err[ek][ci]
sum2 += dwmm_val**2
WMM.SetBinContent(ci+1, ek+1, wmm_val)
WMM.SetBinError(ci+1, ek+1, dwmm_val)
Eff.SetBinError(ci+1, np.sqrt(sum2))
# Write model name to file
modelName = 'whatever'
MODELNAME = TNamed("ModelName",modelName)
MODELNAME.Write()
# Write Cuts to file
cuts = ''
cuts_theta = cuts.replace("rec.zenithAngle","theta")
CUTS = TNamed("cuts",cuts_theta)
CUTS.Write()
# Write the cause and effect arrays to file
CARRAY = TH1F("CARRAY","Cause Array", cbins, carray)
CARRAY.GetXaxis().SetTitle('Causes')
EARRAY = TH1F("EARRAY","Effect Array", ebins, earray)
EARRAY.GetXaxis().SetTitle('Effects')
CARRAY.Write()
EARRAY.Write()
# Write the weighted histograms to file
addtitle = r'Test'
WMM.SetTitle(WMM.GetTitle()+addtitle)
# ModelMM.SetTitle(ModelMM.GetTitle()+addtitle)
Eff.SetTitle(Eff.GetTitle()+addtitle)
WMM.Write()
Eff.Write()
# ModelMM.Write()
NMM.Write()
fout.Write()
fout.Close()
print("Saving output file %s\n"%OutFile)
print("\n=========================\n")
print("Finished here! Exiting...")
def plotDiscriminant(self, discriminant, signal_idx, bkg_idx, weights = None, save_disc = True, rejection_power=True):
'''
Plot the discriminants and the resulting ROC curve derived from them.
Keyword args:
discriminant --- The score of the BDT (set in the setProbas method)
signal_idx --- The true indices of all signal events
bkg_idx ---The true indices of all background events
save_disc --- Flag indicating if the discriminant plots should be saved.
rejection_power --- Whether or not to calculate bkg power: 1/eff in addtion to 1-eff
'''
import ROOT as root
from ROOT import TH2D, TCanvas, TFile, TNamed, TH1F, TLegend
import numpy as np
from root_numpy import fill_hist
import functions as fn
import os
# stop showing plots to screen
root.gROOT.SetBatch(True)
if not os.path.exists(self.output_path):
os.makedirs(self.output_path)
fo = TFile.Open(self.output_path+"/"+self.output_prefix+str(self.job_id)+'.root','RECREATE')
bins = 100
# when creating the plots do it over the range of all probas (scores)
discriminant_bins = np.linspace(np.min(discriminant), np.max(discriminant), bins)
hist_bkg = TH1F("Background Discriminant","Discriminant",bins, np.min(discriminant), np.max(discriminant))
hist_sig = TH1F("Signal Discriminant","Discriminant",bins, np.min(discriminant), np.max(discriminant))
# fill the signal and background histograms
if weights is not None:
fill_hist(hist_bkg,discriminant[bkg_idx], weights[bkg_idx])
fill_hist(hist_sig,discriminant[signal_idx], weights[signal_idx])
else:
fill_hist(hist_bkg,discriminant[bkg_idx])
fill_hist(hist_sig,discriminant[signal_idx])
if hist_bkg.Integral() != 0:
hist_bkg.Scale(1/hist_bkg.Integral())
if hist_sig.Integral() != 0:
hist_sig.Scale(1/hist_sig.Integral())
hist_sig.SetLineColor(4)
hist_bkg.SetLineColor(2)
#hist_sig.SetFillColorAlpha(4, 0.5);
hist_sig.SetFillStyle(3004)
#hist_bkg.SetFillColorAlpha(2, 0.5);
hist_bkg.SetFillStyle(3005)
hist_sig.Write()
hist_bkg.Write()
c = TCanvas()
leg = TLegend(0.8,0.55,0.9,0.65);leg.SetFillColor(root.kWhite)
leg.AddEntry(hist_sig, "Signal","l")
leg.AddEntry(hist_bkg, "Background", "l")
max_y = max(hist_sig.GetMaximum(), hist_bkg.GetMaximum())
hist_sig.SetMaximum(max_y*1.2)
hist_bkg.SetMaximum(max_y*1.2)
hist_sig.GetXaxis().SetTitle("Signal Probability")
hist_sig.GetYaxis().SetTitle("Normalised Entries")
hist_bkg.GetXaxis().SetTitle("Signal Probability")
hist_bkg.GetYaxis().SetTitle("Normalised Entries")
hist_sig.Draw('hist')
hist_bkg.Draw('histsame')
c.Write()
if save_disc == True:
if not os.path.exists('disc_plots'):
os.makedirs('disc_plots')
c.SaveAs('disc_plots/discriminants_'+str(self.job_id)+'.png')
# before deciding whether to do a left or right cut for the roc curve we have to find the median.
sig_median = np.median(discriminant[signal_idx])
bkg_median = np.median(discriminant[bkg_idx])
if sig_median > bkg_median:
roc_cut = 'R'
else:
roc_cut = 'L'
# create the single sided roccurve with the code from Sam
self.roc_graph = fn.RocCurve_SingleSided(hist_sig, hist_bkg, self.sig_eff,self.bkg_eff, roc_cut)
self.roc_graph.SetName('BackgroundRejection')
self.roc_graph.SetTitle('BackgroundRejection')
self.roc_graph.Write()
# get teh background rejection power at 50% signal efficiency
# store the efficiencies first
self.ROC_sig_efficiency, self.ROC_bkg_rejection = fn.getEfficiencies(self.roc_graph)
self.bkgRejectionPower()
# write the roc score as a string to the output file
rej_string = 'rejection_power_'+str(self.ROC_rej_power_05)
rej_n = TNamed(rej_string,rej_string)
rej_n.Write()
if rejection_power:
c.SetLogy()
self.roc_graph_power = fn.RocCurve_SingleSided(hist_sig, hist_bkg, self.sig_eff,self.bkg_eff, roc_cut, rejection=False)
c.cd()
self.roc_graph_power.SetName('BackgroundPower')
self.roc_graph_power.SetTitle('BackgroundPower')
self.roc_graph_power.Write()
# write the decision function to the root file as well, if it is defined.
if len(self.decision_function) > 0:
self.decisionFunctionCanvas()
# add the legends
leg2 = TLegend(0.8,0.55,0.9,0.65);leg2.SetFillColor(root.kWhite)
leg2.AddEntry(self.df_sig, "Signal","l")
leg2.AddEntry(self.df_bkg, "Background", "l")
# canvas to draw them on
c2 = TCanvas('Decision Functions')
self.df_sig.Draw('hist')
self.df_bkg.Draw('histsame')
leg2.Draw('same')
c2.Write()
# now write the df histograms as well
self.df_sig.Write()
self.df_bkg.Write()
self.hist_sig = hist_sig.Clone(); self.hist_sig.SetDirectory(0)
self.hist_bkg = hist_bkg.Clone(); self.hist_bkg.SetDirectory(0)
fo.Close()
def main(argv):
""" Interactive-fit or 'rapid'-fit waveforms that pass a given TCut.
BUG: Doesn't always work with a TChain. Add input files together
with hadd and use a single TFile.
"""
scanSpeed = 0.2
iList = -1
opt1 = ""
intMode, batMode = False, False
if (len(argv) >= 1): opt1 = argv[0]
if "-i" in (opt1):
intMode = True
print "Interactive mode selected."
if "-b" in (opt1):
batMode = True
print "Batch mode selected. A new file will be created."
# Load template waveform (created by gen-template.py)
npzfile = np.load("./data/genTemplateWF.npz")
temp, tempTS, tempE, tempST = npzfile['arr_0'] + 1, npzfile[
'arr_1'], npzfile['arr_2'], npzfile['arr_3'] * 10
# Set cuts
# theCut = inputFile.Get("cutUsedHere").GetTitle()
# DS3 "big DC" cut - PRELIMINARY
theCut = "trapENFCal > 0.8 && gain==0 && mHClean==1 && isGood && !muVeto && !wfDCBits && !isLNFill1 && !isLNFill2 && trapETailMin < 0 && channel!=596 && channel!=676 && channel!=676 && channel!=612 && channel!=1104 && channel!=1200 && channel!=1334 && channel!=1336 && tOffset < 10 && waveS5/TMath::Power(trapENFCal,1/4) < 1200 && (waveS3-waveS2)/trapENFCal > 100 && (waveS3-waveS2)/trapENFCal < 300 && !(channel==692 && (run==16974 || run==16975 || run==16976 || run==16977 || run==16978 || run==16979)) && butterTime < 11000"
# theCut += " && trapENFCal > 1.5 && trapENFCal < 2.1"
# theCut += " && trapENFCal < 20 && trapENFCal > 2 && run > 17480"
# theCut += " && kvorrT/trapENFCal > 2.2 && trapENFCal > 2 && trapENFCal < 10"
# Set file I/O and create entry lists
startT = time.clock()
inFile = "~/project/wavelet-skim/waveletSkimDS3_1.root"
# inFile = "~/project/wavelet-skim/hadd/waveletSkimDS3.root"
outFile = "~/project/fit-skim/fitSkimDS3_1.root"
inputFile = TFile(inFile)
waveTree = inputFile.Get("skimTree")
print "Found", waveTree.GetEntries(
), "input entries. Using cut:\n", theCut, "\n"
waveTree.Draw(">>elist", theCut, "entrylist")
elist = gDirectory.Get("elist")
waveTree.SetEntryList(elist)
nList = elist.GetN()
print "Found", nList, "entries passing cuts."
stopT = time.clock()
print "Data loading time (s): ", (stopT - startT)
# In batch mode ONLY, create an output file+tree & append new branches
outputFile = TFile()
outTree = TTree()
if batMode:
outputFile = TFile(outFile, "RECREATE")
print "Attempting tree copy to", outFile
outTree = waveTree.CopyTree("")
outTree.Write()
print "Wrote", outTree.GetEntries(), "entries."
cutUsed = TNamed("cutUsedHere", theCut)
cutUsed.Write()
fitStart = std.vector("double")()
fitE = std.vector("double")()
fitSlo = std.vector("double")()
fitStartSD = std.vector("double")()
fitESD = std.vector("double")()
fitSloSD = std.vector("double")()
fitChi2NDF = std.vector("double")()
fitLnLike = std.vector("double")()
tExp1 = std.vector("double")()
tExp2 = std.vector("double")()
tPol0 = std.vector("double")()
tPol1 = std.vector("double")()
tPol2 = std.vector("double")()
tPol3 = std.vector("double")()
baseAvg = std.vector("double")()
baseNoise = std.vector("double")()
bFitStart = outTree.Branch("fitStart", fitStart)
bFitE = outTree.Branch("fitE", fitE)
bFitSlo = outTree.Branch("fitSlo", fitSlo)
bFitStart_sd = outTree.Branch("fitStartSD", fitStartSD)
bFitE_sd = outTree.Branch("fitESD", fitESD)
bFitSlo_sd = outTree.Branch("fitSloSD", fitSloSD)
bFitChi2NDF = outTree.Branch("fitChi2NDF", fitChi2NDF)
bFitLnLike = outTree.Branch("fitLnLike", fitLnLike)
bTExp1 = outTree.Branch("tExp1", tExp1)
bTExp2 = outTree.Branch("tExp2", tExp2)
bTPol0 = outTree.Branch("tPol0", tPol0)
bTPol1 = outTree.Branch("tPol1", tPol1)
bTPol2 = outTree.Branch("tPol2", tPol2)
bTPol3 = outTree.Branch("tPol3", tPol3)
bBaseAvg = outTree.Branch("baseAvg", baseAvg)
bBaseNoise = outTree.Branch("baseNoise", baseNoise)
# Make a figure
# with PdfPages('multipage_pdf.pdf') as pdf:
fig = plt.figure(figsize=(11, 7), facecolor='w')
p1 = plt.subplot2grid((6, 7), (0, 0), colspan=4, rowspan=2) # original
p2 = plt.subplot2grid((6, 7), (2, 0), colspan=4, rowspan=3) # rising edge
p3 = plt.subplot2grid((6, 7), (5, 0), colspan=4, rowspan=1) # residual
p4 = plt.subplot2grid((6, 7), (0, 4), colspan=3, rowspan=2) # trace 1
p5 = plt.subplot2grid((6, 7), (2, 4), colspan=3, rowspan=2,
sharex=p4) # trace 2
p6 = plt.subplot2grid((6, 7), (4, 4), colspan=3, rowspan=2,
sharex=p4) # trace 3
if not batMode: plt.show(block=False)
# Setup multiprocessing
manager = Manager()
returnDict = manager.dict()
# Loop over events
while (True):
saveMe = False
iList += 1
if intMode == True and iList != 0:
value = raw_input()
if value == 'q': break
if value == 's': saveMe = True
if value == 'p': iList -= 2 # previous
if (value.isdigit()): iList = int(value) # go to entry
if iList >= elist.GetN(): break
entry = waveTree.GetEntryNumber(iList)
waveTree.LoadTree(entry)
waveTree.GetEntry(entry)
nChans = waveTree.channel.size()
numPass = waveTree.Draw("channel", theCut, "GOFF", 1, iList)
chans = waveTree.GetV1()
chanList = list(set(int(chans[n]) for n in xrange(numPass)))
fitStart.assign(nChans, -9999)
fitE.assign(nChans, -9999)
fitSlo.assign(nChans, -9999)
fitStartSD.assign(nChans, -9999)
fitESD.assign(nChans, -9999)
fitSloSD.assign(nChans, -9999)
fitChi2NDF.assign(nChans, -9999)
fitLnLike.assign(nChans, -9999)
tExp1.assign(nChans, -9999)
tExp2.assign(nChans, -9999)
tPol0.assign(nChans, -9999)
tPol1.assign(nChans, -9999)
tPol2.assign(nChans, -9999)
tPol3.assign(nChans, -9999)
baseAvg.assign(nChans, -9999)
baseNoise.assign(nChans, -9999)
# Loop over hits passing cuts
hitList = (iH for iH in xrange(nChans)
if waveTree.channel.at(iH) in chanList
) # a 'generator expression'
for iH in hitList:
# Load waveform for this hit
run = waveTree.run
chan = waveTree.channel.at(iH)
dataE = waveTree.trapENFCal.at(iH)
dataST = waveTree.butterTime.at(iH) # replace with blrwfFMR50?
toe = waveTree.kvorrT.at(iH) / dataE
print "%d / %d Run %d nCh %d chan %d trapENF %.1f t/e %.1f" % (
iList, nList, run, nChans, chan, dataE, toe)
signal = wl.processWaveform(waveTree.MGTWaveforms.at(iH),
opt='full')
waveBLSub = signal.GetWaveBLSub()
waveFilt = signal.GetWaveFilt()
waveTS = signal.GetTS()
dataBaseline, dataNoise = signal.GetBaseNoise()
# Denoise the data waveform (take only lowest-frequency components)
wp = pywt.WaveletPacket(data=waveBLSub,
wavelet='haar',
mode='symmetric',
maxlevel=3)
new_wp = pywt.WaveletPacket(data=None,
wavelet='haar',
mode='symmetric')
new_wp['aaa'] = wp['aaa'].data
waveDenoised = new_wp.reconstruct(update=False)
# Window the fit around rising edge - start time calculator method
loWin, hiWin = dataST - 1000, dataST + 4000 # ns
if loWin < waveTS[0] or hiWin > waveTS[-1]:
print "Window out of range! dataST: %.1f loWin %.1f hiWin %.1f" % (
dataST, loWin, hiWin)
idx = np.where((waveTS >= loWin) & (waveTS <= hiWin))
data = waveBLSub[idx]
# data = waveDenoised[idx]
dataTS = waveTS[idx]
# Pack into lists
rawList = [waveBLSub, waveTS, dataE, dataST]
dataList = [data, dataTS, dataE, dataST, loWin, hiWin]
tempList = [temp, tempTS, tempE, tempST]
# Optionally save something to a file
if saveMe:
print "Saved entry", iList, iH
np.savez("./data/tailSlopeInputs.npz", rawList, tempList)
# Recreate the guess and the guess's rising edge
guessFull, guessFullTS = wm.MakeModel(dataList,
tempList,
[dataST, dataE, 1.],
opt="full")
guess, guessTS = wm.MakeModel(dataList,
tempList, [dataST, dataE, 1.],
opt="!fancy")
# Make an "almost complete" guess - no MCMC
# st, en, slo = dataST-100, dataE, 5
# InterpFn = interpolate.interp1d(tempTS, temp, kind="linear", copy="False", assume_sorted="True")
# model, modelTS = wm.MakeModel(dataList, tempList, [st,en,slo], fn=InterpFn)
# Fit with MCMC and get best-fit parameters
numSteps, burnIn = 3000, 1800 # default: 10000, 5000. fast: 3000, 1800 long test: 20000,10000
wfModel = wm.TemplateModel(dataList, dataNoise, tempList)
p = Process(target=RunMCMC,
args=(wfModel, numSteps, burnIn, returnDict))
p.start()
p.join()
startTimeTr = returnDict["startTimeTr"]
energyTr = returnDict["energyTr"]
slownessTr = returnDict["slownessTr"]
st = np.median(startTimeTr[burnIn:])
en = np.median(energyTr[burnIn:])
slo = np.median(slownessTr[burnIn:])
InterpFn = interpolate.interp1d(tempTS,
temp,
kind="linear",
copy="False",
assume_sorted="True")
model, modelTS = wm.MakeModel(dataList,
tempList, [st, en, slo],
fn=InterpFn)
# Save some extra parameters for the ROOT output
# Calculate residual, Chi2/NDF, likelihood, etc.
st_std = np.std(startTimeTr[burnIn:])
en_std = np.std(energyTr[burnIn:])
slo_std = np.std(slownessTr[burnIn:])
residual = model - data
frac = (np.power(data - model, 2)) / np.abs(model)
chi2NDF = np.sum(frac) / len(model)
inv_sigma2 = 1.0 / (dataNoise**2)
lnLike = -0.5 * (np.sum((data - model)**2 * inv_sigma2 -
np.log(inv_sigma2)))
# ** Do a separate & simple fit of the tail slope **
# TODO: Add this to process-waveforms.py
idxMax = np.where(
guessFull == guessFull.max()) # returns an array/tuple
idxMax = idxMax[0][0] # "cast" to int
tail, tailTS = waveDenoised[idxMax:], waveTS[idxMax:]
popt, _ = curve_fit(wl.tailModelPol, tailTS, tail) # poly fit
pol0, pol1, pol2, pol3 = popt[0], popt[1], popt[2], popt[3]
a, b = dataE, 72000
popt2, _ = curve_fit(wl.tailModelExp, tailTS, tail,
p0=[a, b]) # expo fit
e1, e2 = popt2[0], popt2[1]
# Assign values to output vectors and fill branches
fitStart[iH], fitStartSD[iH] = st, st_std
fitE[iH], fitESD[iH] = en, en_std
fitSlo[iH], fitSloSD[iH] = slo, slo_std
fitChi2NDF[iH] = chi2NDF
fitLnLike[iH] = lnLike
tExp1[iH], tExp2[iH] = e1, e2
tPol0[iH], tPol1[iH], tPol2[iH], tPol3[iH] = pol0, pol1, pol2, pol3
baseAvg[iH] = dataBaseline
baseNoise[iH] = dataNoise
if batMode:
bFitStart.Fill()
bFitE.Fill()
bFitSlo.Fill()
bFitStart_sd.Fill()
bFitE_sd.Fill()
bFitSlo_sd.Fill()
bFitChi2NDF.Fill()
bFitLnLike.Fill()
bTExp1.Fill()
bTExp2.Fill()
bTPol0.Fill()
bTPol1.Fill()
bTPol2.Fill()
bTPol3.Fill()
bBaseAvg.Fill()
bBaseNoise.Fill()
if iList % 5000 == 0:
outTree.Write("", TObject.kOverwrite)
print "%d / %d entries saved (%.2f %% done)." % (
iList, nList, 100 * (float(iList) / nList))
# If not in batch mode, fill the figure
if batMode: continue
p1.cla()
p1.set_ylabel("ADC")
p1.set_title(
"Run %d Channel %d Entry %d\ntrapENFCal %.1f T/E %.1f ST %.1f"
% (run, chan, iList, dataE, toe, dataST))
p1.plot(waveTS, waveBLSub, color='blue')
p1.plot(waveTS, waveDenoised, color='red', alpha=0.8)
p1.plot(guessFullTS, guessFull, color='orange', linewidth=2)
p1.axvline(x=dataST, color='green', linewidth=2)
p1.axvline(x=loWin, color='black')
p1.axvline(x=hiWin, color='black')
p1.plot(tailTS,
wl.tailModelPol(tailTS, *popt),
color='cyan',
linewidth=1) # tail poly fit
p1.plot(tailTS,
wl.tailModelExp(tailTS, *popt2),
color='cyan',
linewidth=1) # tail expo fit
p2.cla()
p2.plot(dataTS, data, color='blue', label='Data')
p2.plot(guessTS, guess, color='orange', label='Guess')
# special: plot the values of the trace after burn-in
# to see how the model is covering the "money-zone"/rising edge after it's converged.
# for i in range(burnIn,numSteps):
# st_tr, en_tr, slo_tr = M.trace('startTime')[i], M.trace('energy')[i], M.trace('slowness')[i]
# trace, traceTS = wm.MakeModel(dataList, tempList, [st_tr,en_tr,slo_tr], fn=InterpFn)
# p2.plot(traceTS, trace, color='red',alpha=0.1,linewidth=2)
p2.plot(modelTS,
model,
color='red',
linewidth=3,
alpha=0.7,
label='Best Fit')
p2.legend(loc=4)
p3.cla()
p3.set_xlabel("Time [ns]", x=0.95, ha='right')
p3.set_ylabel("Residual [ADC]")
p3.plot(modelTS, residual, color='red')
p3.axhline(y=0, color='blue', alpha=0.3)
p3.axhline(y=dataNoise, color='blue', alpha=0.3)
p3.axhline(y=-1.0 * dataNoise, color='blue', alpha=0.3)
p4.cla()
minST = tempST - tempTS[-1] + hiWin
maxST = tempST - tempTS[0] + loWin
p4.set_title(
"startTime %.1f Energy %.2f\nSlow %.1f chi2/ndf %.1f Min %d Max %d"
% (st, en, slo, chi2NDF, minST, maxST))
p4.plot(startTimeTr[:])
p4.set_ylabel('startTime')
p4.axvline(x=burnIn, color='red', alpha=0.5)
p5.cla()
p5.plot(energyTr[:])
p5.set_ylabel('energy')
p5.axvline(x=burnIn, color='red', alpha=0.5)
p6.cla()
p6.plot(slownessTr[:])
p6.set_ylabel('slowness')
p6.axvline(x=burnIn, color='red', alpha=0.5)
plt.tight_layout()
plt.subplots_adjust(hspace=0.35)
plt.pause(scanSpeed)
# pdf.savefig()
# End loop over events
if batMode:
outTree.Write("", TObject.kOverwrite)
print "Wrote", outTree.GetBranch(
"channel").GetEntries(), "entries in the copied tree,"
print "and wrote", bFitStart.GetEntries(
), "entries in the new branches."
def ApplyChannelCuts(dsNum, cutType, dType):
""" ./lat3.py -cut [dsNum] [cutType]
This runs over whole datasets.
cutTypes:
fs, rn, wf, fs+rn, fs+wf, rn+wf, fs+rn+wf
dTypes:
bkg, cal
"""
# load the database
calDB = db.TinyDB('../calDB.json')
pars = db.Query()
# setup a loop over modules and dataset ranges
gROOT.ProcessLine("gErrorIgnoreLevel = 3001;")
cInfo = ds.CalInfo()
nMods = [1]
if dsNum == 4: nMods = [2]
if dsNum == 5: nMods = [1,2]
# Dummy string for file writing -- adds nothing to the directories if background
dString = ""
if dType == "cal": dString = "cal"
for modNum in nMods:
# Changed so range of idx are set here to take advantage of module number
nRanges = []
if dType == "bkg":
nRanges = [0, ds.dsMap[dsNum]]
# if dsNum==5: nRanges[0] = 80 # exclude DS-5A
elif dType == "cal":
nRanges = [0, len(cInfo.master['ds%d_m%d'%(dsNum, modNum)])-1]
else:
print "cal or bkg not set, returning"
return 0
# Loop over bkgIdx, even though for calibration runs this will represent calIdx
for bkgIdx in range(nRanges[0], nRanges[1]+1):
# load the chains and find the right calIdx's.
skimTree = TChain("skimTree")
# build the file list
fRegex = ""
fList = []
if dType == "bkg":
fRegex = "/global/homes/w/wisecg/project/bg-lat/latSkimDS%d_%d_*.root" % (dsNum, bkgIdx)
fList = glob.glob(fRegex)
skimTree.Add(fRegex)
elif dType == "cal":
calList = cInfo.GetCalList("ds%d_m%d" % (dsNum, modNum), bkgIdx, runLimit=10)
for i in calList:
fList += glob.glob("/global/homes/w/wisecg/project/cal-lat/latSkimDS%d_run%d_*.root"%(dsNum,i))
skimTree.Add("/global/homes/w/wisecg/project/cal-lat/latSkimDS%d_run%d_*.root" % (dsNum, i))
file0 = fList[0]
print "DS-%d subset %d, Mod-%d. N_files: %d" % (dsNum, bkgIdx, modNum, len(fList))
# Print some basic info about files
f = TFile(file0)
firstRun, lastRun, calIdxLo, calIdxHi = 0,0,0,0
theCut = f.Get("theCut").GetTitle()
if dType == "bkg":
skimTree.GetEntry(0)
firstRun = skimTree.run
skimTree.GetEntry(skimTree.GetEntries()-1)
lastRun = skimTree.run
calIdxLo = cInfo.GetCalIdx("ds%d_m%d" % (dsNum, modNum), firstRun)
calIdxHi = cInfo.GetCalIdx("ds%d_m%d" % (dsNum, modNum), lastRun)
elif dType == "cal":
# All the idx are the same for calibration!
calIdxLo = calIdxHi = bkgIdx
firstRun, lastRun = calList[0], calList[-1]
print " Entries %d firstRun %d lastRun %d calIdxLo %d calIdxHi %d" % (skimTree.GetEntries(),firstRun,lastRun,calIdxLo,calIdxHi)
# build the channel list (remove 692 and 1232 from DS5 for now.)
chList = ds.GetGoodChanList(dsNum)
if dsNum==5 and modNum==1:
chList = [ch for ch in chList if ch < 1000 and ch!=692]
if dsNum==5 and modNum==2:
chList = [ch for ch in chList if ch > 1000 and ch!=1232]
# -- create a dict of cuts for each channel, covering each calIdx. --
cutDict = {}
for calIdx in range(calIdxLo, calIdxHi+1):
runCovMin = cInfo.master["ds%d_m%d" % (dsNum, modNum)][calIdx][1]
runCovMax = cInfo.master["ds%d_m%d" % (dsNum, modNum)][calIdx][2]
runCut = "run>=%d && run<=%d" % (runCovMin, runCovMax)
fsD = ds.getDBRecord("fitSlo_ds%d_idx%d_m%d_Peak" % (dsNum, calIdx, modNum), False, calDB, pars)
rnSD = ds.getDBRecord("riseNoise_ds%d_idx%d_m%d_SoftPlus" % (dsNum, calIdx, modNum), False, calDB, pars)
rnCD = ds.getDBRecord("riseNoise_ds%d_idx%d_m%d_Continuum" % (dsNum, calIdx, modNum), False, calDB, pars)
wfD = ds.getDBRecord("wfstd_ds%d_idx%d_mod%d" % (dsNum, calIdx, modNum), False, calDB, pars)
for ch in chList:
fsCut, rnCut, wfCut, chanCut = None, None, None, None
# print ch,":",fsD[ch][2]
# fitSlo: check the 90% value is positive
if fsD[ch][2] > 0:
fsCut = "fitSlo<%.2f" % fsD[ch][2]
# riseNoise: check the softplus curvature is positive
if rnSD[ch][3] > 0:
rnCut = "riseNoise<(%.3f+%.5f*TMath::Log(1+TMath::Exp((trapENFCal-(%.3f))/%.3f)))" % (max(rnSD[ch][0],rnCD[ch][4]), rnSD[ch][1], rnSD[ch][2], rnSD[ch][3])
# wfStd: check if ralph says this is ok to use
if wfD!=0 and ch in wfD.keys() and wfD[ch][0]==u'y':
wfCut = "abs(wfstd - sqrt((%.4e + %.4e*trapENFCal + %.4e*trapENFCal**2 + %.2e*pow(trapENFCal,3) + %.2e*pow(trapENFCal,4))**2 + %.4f)) < (%.2f+%.3f*trapENFCal)" % (wfD[ch][3], wfD[ch][4], wfD[ch][5], wfD[ch][6], wfD[ch][7], wfD[ch][8], wfD[ch][9], wfD[ch][10])
# set the combination channel cut
if cutType == "fs" and fsCut!=None:
chanCut = "(%s && %s)" % (runCut, fsCut)
if cutType == "rn" and rnCut!=None:
chanCut = "(%s && %s)" % (runCut, rnCut)
if cutType == "wf" and wfCut!=None:
chanCut = "(%s && %s)" % (runCut, wfCut)
if cutType == "fs+rn" and fsCut!=None and rnCut!=None:
chanCut = "(%s && %s && %s)" % (runCut, fsCut, rnCut)
if cutType == "fs+wf" and fsCut!=None and wfCut!=None:
chanCut = "(%s && %s && %s)" % (runCut, fsCut, wfCut)
if cutType == "rn+wf" and rnCut!=None and wfCut!=None:
chanCut = "(%s && %s && %s)" % (runCut, rnCut, wfCut)
if cutType == "fs+rn+wf" and fsCut!=None and rnCut!=None and wfCut!=None:
chanCut = "(%s && %s && %s && %s)" % (runCut, fsCut, rnCut, wfCut)
# create dict entry for this channel or append to existing, taking care of parentheses and OR's.
if ch in cutDict.keys() and chanCut!=None:
cutDict[ch] += " || %s" % chanCut
elif ch not in cutDict.keys() and chanCut!=None:
cutDict[ch] = "(%s" % chanCut
# close the parens for each channel entry
for key in cutDict:
cutDict[key] += ")"
# -- finally, loop over each channel we have an entry for, get its cut, and create an output file. --
for ch in cutDict:
# TODO: threshold cut (or at least save the value for each bkgIdx)
chanCut = theCut + "&& gain==0 && channel==%d" % ch
if cutType == "fs":
outFile = "~/project/cuts/%sfs/%sfitSlo-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& fitSlo>0 && %s" % cutDict[ch]
if cutType == "rn":
outFile = "~/project/cuts/%srn/%sriseNoise-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& %s" % cutDict[ch]
if cutType == "wf":
outFile = "~/project/cuts/%swf/%swfstd-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& %s" % cutDict[ch]
if cutType == "fs+rn":
outFile = "~/project/cuts/%sfs_rn/%sfs_rn-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& fitSlo>0 && %s" % cutDict[ch]
if cutType == "fs+wf":
outFile = "~/project/cuts/%sfs_wf/%sfs_wf-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& fitSlo>0 && %s" % cutDict[ch]
if cutType == "rn+wf":
outFile = "~/project/cuts/%srn_wf/%srn_wf-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& %s" % cutDict[ch]
if cutType == "fs+rn+wf":
outFile = "~/project/cuts/%sfs_rn_wf/%sfs_rn_wf-DS%d-%d-ch%d.root" % (dString, dString, dsNum, bkgIdx, ch)
chanCut += "&& fitSlo>0 && %s" % cutDict[ch]
print " Writing to:",outFile
print " Cut used:",chanCut,"\n"
outFile = TFile(outFile,"RECREATE")
outTree = TTree()
outTree = skimTree.CopyTree(chanCut)
outTree.Write()
cutUsed = TNamed("chanCut",chanCut)
cutUsed.Write()
print "Wrote",outTree.GetEntries(),"entries."
outFile.Close()
def createinputs(fname, sampleset, observables, bins, **kwargs):
"""Create histogram inputs in ROOT file for datacards.
fname: filename pattern of ROOT file
sampleset: SampleSet object
observables: list of Variables objects
bins: list of Selection objects
"""
#LOG.header("createinputs")
outdir = kwargs.get('outdir', "")
tag = kwargs.get('tag', "") # file tag
htag = kwargs.get('htag', "") # hist tag for systematic
filters = kwargs.get('filter',
None) # only create histograms for these processes
vetoes = kwargs.get('veto', None) # veto these processes
parallel = kwargs.get('parallel', True) # MultiDraw histograms in parallel
recreate = kwargs.get('recreate', False) # recreate ROOT file
replaceweight = kwargs.get('replaceweight', None) # replace weight
extraweight = kwargs.get('weight', "") # extraweight
shiftQCD = kwargs.get('shiftQCD', 0) # e.g 0.30 for 30%
verbosity = kwargs.get('verb', 0)
option = 'RECREATE' if recreate else 'UPDATE'
method = 'QCD_OSSS' if filters == None or 'QCD' in filters else None
method = kwargs.get('method', method)
# FILE LOGISTICS: prepare file and directories
files = {}
ensuredir(outdir)
fname = os.path.join(outdir, fname)
for obs in observables:
obsname = obs.filename
ftag = tag + obs.tag
fname_ = repkey(fname, OBS=obsname, TAG=tag)
file = TFile.Open(fname_, option)
if recreate:
print ">>> created file %s" % (fname_)
for selection in bins:
if not obs.plotfor(selection): continue
obs.changecontext(selection)
ensureTDirectory(file, selection.filename, cd=True, verb=verbosity)
if recreate:
string = joincuts(selection.selection, obs.cut)
TNamed("selection", string).Write(
) # write exact selection string to ROOT file for the record / debugging
#TNamed("weight",sampleset.weight).Write()
LOG.verb(
"%s selection %r: %r" % (obsname, selection.name, string),
verbosity, 1)
files[obs] = file
# GET HISTS
for selection in bins:
bin = selection.filename # bin name
print ">>>\n>>> " + color(
" %s " % (bin), 'magenta', bold=True, ul=True)
if htag:
print ">>> systematic uncertainty: %s" % (color(
htag.lstrip('_'), 'grey'))
if recreate or verbosity >= 1:
print ">>> %r" % (selection.selection)
hists = sampleset.gethists(observables,
selection,
method=method,
split=True,
parallel=parallel,
filter=filters,
veto=vetoes)
# SAVE HIST
ljust = 4 + max(11, len(htag)) # extra space
TAB = LOG.table("%10.1f %10d %-18s %s")
TAB.printheader('events', 'entries', 'variable',
'process'.ljust(ljust))
for obs, hist in hists.iterhists():
name = lreplace(hist.GetName(), obs.filename).strip(
'_') # histname = $VAR_$NAME (see Sample.gethist)
if not name.endswith(htag):
name += htag # HIST = $PROCESS_$SYSTEMATIC
name = repkey(name, BIN=bin)
drawopt = 'E1' if 'data' in name else 'EHIST'
lcolor = kBlack if any(
s in name
for s in ['data', 'ST', 'VV']) else hist.GetFillColor()
hist.SetOption(drawopt)
hist.SetLineColor(lcolor)
hist.SetFillStyle(0) # no fill in ROOT file
hist.SetName(name)
hist.GetXaxis().SetTitle(obs.title)
for i, yval in enumerate(hist):
if yval < 0:
print ">>> replace bin %d (%.3f<0) of %r" % (
i, yval, hist.GetName())
hist.SetBinContent(i, 0)
files[obs].cd(bin) # $FILE:$BIN/$PROCESS_$SYSTEMATC
hist.Write(name, TH1.kOverwrite)
TAB.printrow(hist.GetSumOfWeights(), hist.GetEntries(),
obs.printbins(), name)
deletehist(hist) # clean memory
# CLOSE
for obs, file in files.iteritems():
file.Close()