last_game_y = 0
g = Gamepad(usb_hid.devices)
while True:
x = ss.analog_read(2)
y = ss.analog_read(3)
game_x = range_map(x, 0, 1023, -127, 127)
game_y = range_map(y, 0, 1023, -127, 127)
if last_game_x != game_x or last_game_y != game_y:
last_game_x = game_x
last_game_y = game_y
print(game_x, game_y)
g.move_joysticks(x=game_x, y=game_y)
buttons = (BUTTON_RIGHT, BUTTON_DOWN, BUTTON_LEFT, BUTTON_UP, BUTTON_SEL)
button_state = [False] * len(buttons)
for i, button in enumerate(buttons):
buttons = ss.digital_read_bulk(button_mask)
if not (buttons & (1 << button) and not button_state[i]):
g.press_buttons(i + 1)
print("Press", i + 1)
button_state[i] = True
elif button_state[i]:
g.release_buttons(i + 1)
print("Release", i + 1)
button_state[i] = False
time.sleep(0.01)
import board
import digitalio
import usb_hid
from adafruit_hid.gamepad import Gamepad
shifter = Gamepad(usb_hid.devices)
button_pins = (board.GP18, board.GP19, board.GP20, board.GP21, board.GP22,
board.GP26, board.GP27)
shifter_buttons = (1, 2, 3, 4, 5, 6, 7)
buttons = [digitalio.DigitalInOut(pin) for pin in button_pins]
for button in buttons:
button.direction = digitalio.Direction.INPUT
button.pull = digitalio.Pull.UP
pressedButtons = [False, False, False, False, False, False, False]
while True:
for i, button in enumerate(buttons):
if pressedButtons[i] != button.value:
if button.value:
shifter.release_buttons(shifter_buttons[i])
else:
shifter.press_buttons(shifter_buttons[i])
pressedButtons[i] = button.value
data = [up, down, left, right, ab, c] buttons = len(data) for pin in data: pin.direction = digitalio.Direction.INPUT pin.pull = digitalio.Pull.UP select = digitalio.DigitalInOut(board.GP22) select.direction = digitalio.Direction.OUTPUT wait = .00001 while True: select.value = True sleep(wait) for h, btn in enumerate(data): pressed[h] = data[h].value select.value = False sleep(wait) pressed[buttons] = ab.value pressed[buttons+1] = c.value # and since we know the state of all buttons, let's press 'em for index in pressed: # Data pulls up (grounds when pressed), which means we actually press on False if pressed[index] == True: gamepad.release_buttons(gamepad_buttons[genesis_buttons[index]]) else: gamepad.press_buttons(gamepad_buttons[genesis_buttons[index]])
cycle_clock = 0.000006 # 6µs according to spec cycle_pause = 0.000006 # 6µs according to spec while True: # toggle the latch to indicate we're polling for current button states latch.value = True sleep(cycle_latch) latch.value = False sleep(cycle_pause) # the A button is always sent immediately pressed[0] = data.value # now cycle through the rest of the buttons in order for x in range(1, 8): # each clock pulse tells the controller to send the next button in its internal order clock.value = True sleep(cycle_clock) clock.value = False sleep(cycle_pause) pressed[x] = data.value # and since we know the state of all buttons, let's press 'em for index in pressed: # Data pulls up (grounds when pressed), which means we actually press on False if pressed[index] == True: gamepad.release_buttons(gamepad_buttons[nes_buttons[index]]) else: gamepad.press_buttons(gamepad_buttons[nes_buttons[index]])
sleep(delaytime)
clock.value = False
sleep(delaytime)
button_status[buttons[x + 1]] = data.value
if button_status['select'] == False and button_status[
'start'] == False and button_status['up'] == False:
if mode == 2:
mode = 1
else:
mode = 2
keyboard.release_all()
print(mode)
sleep(0.3)
press_buttons = []
release_buttons = []
for x in buttons:
if mode == 2:
if button_status[buttons[x]] == True:
gamepad.release_buttons(x + 1)
else:
gamepad.press_buttons(x + 1)
else:
if button_status[buttons[x]] == True:
release_buttons.append(keyboard_buttons[buttons[x]])
else:
press_buttons.append(keyboard_buttons[buttons[x]])
if mode == 1:
keyboard.press(*press_buttons)
keyboard.release(*release_buttons)
# reverse thrust (TODO: maybe buttons?)
#rthr1 = analogio.AnalogIn(board.RCC1)
#rthr2 = analogio.AnalogIn(board.RCC2)
#rthr3 = analogio.AnalogIn(board.RCC3)
#rthr4 = analogio.AnalogIn(board.RCC4)
# Equivalent of Arduino's map() function.
def range_map(x, in_min, in_max, out_min, out_max):
return (x - in_min) * (out_max - out_min) // (in_max - in_min) + out_min
while True:
# Buttons are grounded when pressed (.value = False).
for i, button in enumerate(buttons):
gamepad_button_num = gamepad_buttons[i]
if button.value:
gp.release_buttons(gamepad_button_num)
print(" release", gamepad_button_num, end="")
else:
gp.press_buttons(gamepad_button_num)
print(" press", gamepad_button_num, end="")
# Convert range[0, 65535] to -127 to 127
gp.move_joysticks(
x=range_map(ax.value, 0, 65535, -127, 127),
y=range_map(ay.value, 0, 65535, -127, 127),
)
print(" x", ax.value, "y", ay.value)
whammyVal = setToJoyStickRange(whammyVal)
if(whammyVal < whammyDeadZoneVal):
return whammyDeadZoneVal
else:
return whammyVal
# rounds down the joystick value to the value specified
def roundStickVal(stickVal):
roundDownVal = 20
return int(stickVal / roundDownVal) * roundDownVal
while True:
for gamenum, button in buttons.items():
if button.value:
gamepad.press_buttons(gamenum)
else:
gamepad.release_buttons(gamenum)
# the limit on each analog stick is by the first value
# make limit -127 to 127
# adjust your joystick until limits are -127 to 127
gamepad.move_joysticks(
setToJoyStickRange(ana_joy_x.value/64000),
setToJoyStickRange(ana_joy_y.value/65000),
roundStickVal(whammyDeadZone((ana_whammy.value-30000)/25000)),
None)
#time.sleep(0.1)
#print(roundStickVal(whammyDeadZone((ana_whammy.value-30000)/25000)))
gamepad_buttons = (1, 2, 8, 15)
buttons = [digitalio.DigitalInOut(pin) for pin in button_pins]
for button in buttons:
button.direction = digitalio.Direction.INPUT
button.pull = digitalio.Pull.UP
# Connect an analog two-axis joystick to A4 and A5.
ax = analogio.AnalogIn(board.A4)
ay = analogio.AnalogIn(board.A5)
# Equivalent of Arduino's map() function.
def range_map(x, in_min, in_max, out_min, out_max):
return (x - in_min) * (out_max - out_min) // (in_max - in_min) + out_min
while True:
# Buttons are grounded when pressed (.value = False).
for i, button in enumerate(buttons):
gamepad_button_num = gamepad_buttons[i]
if button.value:
gp.release_buttons(gamepad_button_num)
print(" release", gamepad_button_num, end='')
else:
gp.press_buttons(gamepad_button_num)
print(" press", gamepad_button_num, end='')
# Convert range[0, 65535] to -127 to 127
gp.move_joysticks(x=range_map(ax.value, 0, 65535, -127, 127),
y=range_map(ay.value, 0, 65535, -127, 127))
print(" x", ax.value, "y", ay.value)
def get_wheel_position(device: AnalogIn) -> int:
"""Returns the current Wheel position, value between -127 and 127
Args:
device (AnalogIn): Analog device representing the wheel
Returns:
int: Scaled wheel value, between -127 and 127
"""
return scale_voltage(device.value, min_voltage=3520, max_voltage=61712)
# calibrate_analog_input(steering_wheel)
while True:
for idx, button in buttons.items():
if not button["device"].value and button["pressed"]:
button["pressed"] = False
print(f"Button {idx} Released!")
gp.release_buttons(idx)
if button["device"].value and not button["pressed"]:
button["pressed"] = True
print(f"Button {idx} pressed!")
gp.press_buttons(idx)
gear_position = get_gear_position(gear_lever)
wheel_position = get_wheel_position(steering_wheel)
gp.move_joysticks(x=wheel_position, y=gear_position)