def _move_by_vehicle_poses(client: airsim.MultirotorClient,
args: argparse.Namespace) -> None:
raise Warning("simSetVehiclePose() is meant for ComputerVision mode")
# NOTE check https://github.com/microsoft/AirSim/pull/2324
for position, orientation in args.viewpoints:
pose = airsim.Pose(airsim.Vector3r(*position),
airsim.Quaternionr(*orientation))
client.simSetVehiclePose(pose, ignore_collision=True)
client.hoverAsync().join()
time.sleep(2)
def fly(client: airsim.MultirotorClient, args: argparse.Namespace) -> None:
if args.reset:
client.reset()
client.simFlushPersistentMarkers()
plot_pose(client, TEST_POSE)
plot_xyz_axis(client, X, Y, Z, origin=O)
with airsimy.pose_at_simulation_pause(client) as pose:
plot_pose(client, pose)
client.simPlotArrows([pose.position], [LOOK_AT_TARGET],
Rgba.White,
is_persistent=True)
# NOTE use x' = (LOOK_AT_TARGET - p) as the new x-axis (i.e. front vector),
# and project the current up/down vector (z-axis in AirSim) into the plane
# that is normal to x' at point p. This way we can get the remaining right
# vector by computing cross(down, front).
x_prime = LOOK_AT_TARGET - pose.position
_, _, z_axis = AirSimNedTransform.local_axes_frame(pose)
z_prime = airsimy.vector_projected_onto_plane(z_axis,
plane_normal=x_prime)
# NOTE don't forget to normalize! Not doing so will break the orientation below.
x_prime /= x_prime.get_length()
z_prime /= z_prime.get_length()
y_prime = z_prime.cross(x_prime)
plot_xyz_axis(
client,
x_prime * 1.25,
y_prime * 1.25,
z_prime * 1.25,
origin=pose.position,
colors=CMY,
thickness=1.5,
)
# Now, find the orientation that corresponds to the x'-y'-z' axis frame:
new_pose = Pose(
pose.position,
airsimy.quaternion_that_rotates_axes_frame(
source_xyz_axes=(X, Y, Z),
target_xyz_axes=(x_prime, y_prime, z_prime),
),
)
plot_pose(client, new_pose
) # NOTE this should be the same as the plot_xyz_axis above!
if args.set:
client.simSetVehiclePose(new_pose, ignore_collision=True)
def fly(client: airsim.MultirotorClient, args: argparse.Namespace) -> None:
if args.z is not None and args.z > 0:
print("Warning: AirSim uses NED coordinates, meaning +z is down")
print(" (to fly upwards use negative z values)\n")
state = client.getMultirotorState()
start_pos = {
'NED': get_NED_coords(client, state),
'UE4': get_UE4_coords(client, state)
} # obs.: UE4's PlayerStart coordinates correspond to ~(0, 0, 0) in AirSim's NED system
coords_format = "({:.2f} {:.2f} {:.2f})"
print("Starting position (NED): {}".format(coords_format).format(
*start_pos['NED']))
if args.verbose:
print("Starting position (UE4): {}".format(coords_format).format(
*start_pos['UE4']))
if args.relative:
if args.z is None:
args.z = 0
xyz = tuple(
sum(axis)
for axis in zip(start_pos['NED'], (args.x, args.y, args.z)))
else:
if args.z is None:
args.z = start_pos['NED'][2] # keep the same altitude
xyz = (args.x, args.y, args.z)
if state.landed_state == airsim.LandedState.Landed:
print(f"\nlanded_state = {state.landed_state} (Landed)")
print("[ff] Taking off... ", end="", flush=True)
client.takeoffAsync().join()
print("done.")
else:
# NOTE .exe environments seem to always return Landed
print(f"\nlanded_state = {state.landed_state} (Flying)")
client.hoverAsync().join()
if args.teleport:
print("[ff] Teleporting to {}... ".format(coords_format).format(*xyz),
end="",
flush=True)
pose = airsim.Pose()
pose.position = airsim.Vector3r(*xyz)
client.simSetVehiclePose(pose, ignore_collision=True)
time.sleep(4) # wait a few seconds after teleporting
else:
print("[ff] Moving to {}... ".format(coords_format).format(*xyz),
end="",
flush=True)
client.moveToPositionAsync(*xyz, args.velocity).join()
print("done.")
print(f"[ff] Hovering for {args.wait_sec} seconds... ", end="", flush=True)
client.hoverAsync().join()
time.sleep(args.wait_sec)
print("done.\n")
state = client.getMultirotorState()
print("[ff] Ending position (NED): {}".format(coords_format).format(
*get_NED_coords(client, state)))
if args.verbose:
print("[ff] Ending position (UE4): {}".format(coords_format).format(
*get_UE4_coords(client, state)))
def teleport(client: airsim.MultirotorClient,
to: Pose,
ignore_collision: bool = True) -> None:
# HACK see https://github.com/Microsoft/AirSim/issues/1618#issuecomment-689152817
client.simSetVehiclePose(to, ignore_collision)
client.moveToPositionAsync(*ff.to_xyz_tuple(to.position), velocity=1)
def fly(client: airsim.MultirotorClient, args: argparse.Namespace) -> None:
initial_pose = client.simGetVehiclePose()
if args.verbose:
ff.print_pose(initial_pose, airsim.to_eularian_angles)
ff.log(client.simGetCameraInfo(camera_name=CAPTURE_CAMERA))
if args.flush or (args.capture_dir and not args.debug):
client.simFlushPersistentMarkers()
camera_poses = []
for camera in args.trajectory:
position = convert_uavmvs_to_airsim_position(
camera.position, translation=args.offset, scaling=args.scale
)
orientation = quaternion_orientation_from_eye_to_look_at(position, LOOK_AT_TARGET)
camera_poses.append(Pose(position, orientation))
if args.debug:
camera_positions = [pose.position for pose in camera_poses]
client.simPlotPoints(camera_positions, Rgba.Blue, is_persistent=True)
client.simPlotLineStrip(camera_positions, Rgba.Cyan, thickness=2.5, is_persistent=True)
airsim_record = []
def do_stuff_at_uavmvs_viewpoint(i, pose):
nonlocal client, camera_poses, airsim_record
log_string = f"({i}/{len(camera_poses)})"
p, q = pose.position, pose.orientation
if args.debug:
log_string += f" position = {to_xyz_str(p)}"
client.simPlotTransforms([pose], scale=100, is_persistent=True)
# client.simPlotArrows([p], [LOOK_AT_TARGET], Rgba.White, thickness=3.0, duration=10)
elif args.capture_dir:
path = f"{args.prefix}pose{args.suffix}_{i:0{len(str(len(camera_poses)))}}.png"
path = os.path.join(args.capture_dir, path)
airsim.write_png(path, AirSimImage.get_mono(client, CAPTURE_CAMERA))
log_string += f' saved image to "{path}"'
record_line = AirSimRecord.make_line_string(p, q, time_stamp=str(i), image_file=path)
airsim_record.append(record_line)
ff.log(log_string)
if IS_CV_MODE:
for i, camera_pose in enumerate(camera_poses):
client.simSetVehiclePose(camera_pose, ignore_collision=True)
do_stuff_at_uavmvs_viewpoint(i, camera_pose)
time.sleep(CV_SLEEP_SEC)
else:
client.moveToZAsync(z=-10, velocity=VELOCITY).join() # XXX avoid colliding on take off
client.hoverAsync().join()
mean_position_error = 0.0
for i, camera_pose in enumerate(camera_poses):
client.moveToPositionAsync(
*to_xyz_tuple(camera_pose.position),
velocity=VELOCITY,
drivetrain=DrivetrainType.MaxDegreeOfFreedom,
yaw_mode=YawMode(is_rate=False, yaw_or_rate=YAW_N),
).join()
with pose_at_simulation_pause(client) as real_pose:
# NOTE when we pre-compute the viewpoint's camera orientation, we use the
# expected drone position, which (should be close, but) is not the actual
# drone position. Hence, we could experiment with using fake orientation:
# quaternion_orientation_from_eye_to_look_at(real_pose.position, LOOK_AT_TARGET)
fake_pose = Pose(real_pose.position, camera_pose.orientation)
client.simSetVehiclePose(fake_pose, ignore_collision=True)
client.simContinueForFrames(1) # NOTE ensures pose change
do_stuff_at_uavmvs_viewpoint(i, fake_pose)
client.simSetVehiclePose(real_pose, ignore_collision=True)
position_error = real_pose.position.distance_to(camera_pose.position)
mean_position_error += position_error
ff.log_debug(f"{position_error = }")
mean_position_error /= len(camera_poses)
ff.log_debug(f"{mean_position_error = }")
if airsim_record:
print_to_file = args.record_path is not None
file = open(args.record_path, "w") if print_to_file else None
print(AirSimRecord.make_header_string(), file=(file if print_to_file else sys.stdout))
for line in airsim_record:
print(line, file=(file if print_to_file else sys.stdout))
if print_to_file:
file.close()
ff.log_info(f'Saved AirSim record to "{args.record_path}"')