def endFeature(self):
     "Actually write the interface to the output file."
     # C-specific
     if self.emit:
         if self.feature_not_empty:
             is_core = self.featureName.startswith(self.conventions.api_prefix + "VERSION_")
             if self.genOpts.conventions.writeFeature(self.featureExtraProtect, self.genOpts.filename):
                 self.newline()
                 if self.genOpts.protectFeature:
                     write('#ifndef', self.featureName, file=self.outFile)
                 # If type declarations are needed by other features based on
                 # this one, it may be necessary to suppress the ExtraProtect,
                 # or move it below the 'for section...' loop.
                 if self.featureExtraProtect is not None:
                     write('#ifdef', self.featureExtraProtect, file=self.outFile)
                 self.newline()
                 write('#define', self.featureName, '1', file=self.outFile)
                 for section in self.TYPE_SECTIONS:
                     contents = self.sections[section]
                     if contents:
                         write('\n'.join(contents), file=self.outFile)
                 if self.genOpts.genFuncPointers and self.sections['commandPointer']:
                     write('\n'.join(self.sections['commandPointer']), file=self.outFile)
                     self.newline()
                 if self.sections['command']:
                     if self.genOpts.protectProto:
                         write(self.genOpts.protectProto,
                               self.genOpts.protectProtoStr, file=self.outFile)
                     if self.genOpts.protectExtensionProto and not is_core:
                         write(self.genOpts.protectExtensionProto,
                               self.genOpts.protectExtensionProtoStr, file=self.outFile)
                     write('\n'.join(self.sections['command']), end='', file=self.outFile)
                     if self.genOpts.protectExtensionProto and not is_core:
                         write('#endif',
                               self._endProtectComment(protect_directive=self.genOpts.protectExtensionProto,
                                                       protect_str=self.genOpts.protectExtensionProtoStr),
                               file=self.outFile)
                     if self.genOpts.protectProto:
                         write('#endif',
                               self._endProtectComment(protect_directive=self.genOpts.protectProto,
                                                       protect_str=self.genOpts.protectProtoStr),
                               file=self.outFile)
                     else:
                         self.newline()
                 if self.featureExtraProtect is not None:
                     write('#endif',
                           self._endProtectComment(protect_str=self.featureExtraProtect),
                           file=self.outFile)
                 if self.genOpts.protectFeature:
                     write('#endif',
                           self._endProtectComment(protect_str=self.featureName),
                           file=self.outFile)
     # Finish processing in superclass
     OutputGenerator.endFeature(self)
Beispiel #2
0
 def endFeature(self):
     # C-specific
     # Actually write the interface to the output file.
     if self.emit:
         if self.feature_not_empty:
             if self.genOpts.conventions.writeFeature(self.featureExtraProtect, self.genOpts.filename):
                 self.newline()
                 if self.genOpts.protectFeature:
                     write('#ifndef', self.featureName, file=self.outFile)
                 # If type declarations are needed by other features based on
                 # this one, it may be necessary to suppress the ExtraProtect,
                 # or move it below the 'for section...' loop.
                 if self.featureExtraProtect is not None:
                     write('#ifdef', self.featureExtraProtect, file=self.outFile)
                 self.newline()
                 write('#define', self.featureName, '1', file=self.outFile)
                 for section in self.TYPE_SECTIONS:
                     # OpenXR:
                     # If we need the explicit include of the external platform header,
                     # put it right before the function pointer definitions
                     if section == "funcpointer" and self.need_platform_include:
                         write('// Include for OpenXR Platform-Specific Types', file=self.outFile)
                         write('#include "openxr_platform.h"', file=self.outFile)
                         self.newline()
                         self.need_platform_include = False
                     contents = self.sections[section]
                     if contents:
                         write('\n'.join(contents), file=self.outFile)
                 if self.genOpts.genFuncPointers and self.sections['commandPointer']:
                     write('\n'.join(self.sections['commandPointer']), file=self.outFile)
                     self.newline()
                 if self.sections['command']:
                     if self.genOpts.protectProto:
                         write(self.genOpts.protectProto,
                             self.genOpts.protectProtoStr, file=self.outFile)
                     write('\n'.join(self.sections['command']), end='', file=self.outFile)
                     if self.genOpts.protectProto:
                         write('#endif', file=self.outFile)
                     else:
                         self.newline()
                 if self.featureExtraProtect is not None:
                     write('#endif /*', self.featureExtraProtect, '*/', file=self.outFile)
                 if self.genOpts.protectFeature:
                     write('#endif /*', self.featureName, '*/', file=self.outFile)
     # Finish processing in superclass
     OutputGenerator.endFeature(self)
    def endFeature(self):
        # Generate code for the feature
        if self.emit and self.needFeatureGeneration():
            if self.featureBreak:
                self.newline()

            if (self.featureExtraProtect is not None):
                write('#ifdef', self.featureExtraProtect, file=self.outFile)

            self.generateFeature()

            if (self.featureExtraProtect is not None):
                write('#endif /*',
                      self.featureExtraProtect,
                      '*/',
                      file=self.outFile)

        # Finish processing in superclass
        OutputGenerator.endFeature(self)
    def endFeature(self):
        # Add feature to global list with protectFeature
        if self.emit and self.featurePointers:
            if self.genOpts.protectFeature:
                self.pointers.append('#ifdef ' + self.featureName)
                self.pointerInitializersInstance.append('#ifdef ' +
                                                        self.featureName)
                self.pointerInitializersDevice.append('#ifdef ' +
                                                      self.featureName)

            if self.featureExtraProtect is not None:
                self.pointers.append('#ifdef ' + self.featureExtraProtect)
                self.pointerInitializersInstance.append('#ifndef ' +
                                                        self.featureName)
                self.pointerInitializersDevice.append('#ifndef ' +
                                                      self.featureName)

            self.pointers += self.featurePointers
            self.pointerInitializersInstance += self.featurePointerInitializersInstance
            self.pointerInitializersDevice += self.featurePointerInitializersDevice

            if self.featureExtraProtect is not None:
                self.pointers.append('#endif /* ' + self.featureExtraProtect +
                                     ' */')
                self.pointerInitializersInstance.append(
                    '#endif /* ' + self.featureExtraProtect + ' */')
                self.pointerInitializersDevice.append(
                    '#endif /* ' + self.featureExtraProtect + ' */')
            if self.genOpts.protectFeature:
                self.pointers.append('#endif /* ' + self.featureName + ' */')
                self.pointerInitializersInstance.append('#endif /* ' +
                                                        self.featureName +
                                                        ' */')
                self.pointerInitializersDevice.append('#endif /* ' +
                                                      self.featureName + ' */')

        # Finish processing in superclass
        OutputGenerator.endFeature(self)
Beispiel #5
0
class Registry:
    """Represents an API registry loaded from XML"""
    def __init__(self):
        self.tree         = None
        self.typedict     = {}
        self.groupdict    = {}
        self.enumdict     = {}
        self.cmddict      = {}
        self.apidict      = {}
        self.extensions   = []
        self.extdict      = {}
        # A default output generator, so commands prior to apiGen can report
        # errors via the generator object.
        self.gen          = OutputGenerator()
        self.genOpts      = None
        self.emitFeatures = False
    def loadElementTree(self, tree):
        """Load ElementTree into a Registry object and parse it"""
        self.tree = tree
        self.parseTree()
    def loadFile(self, file):
        """Load an API registry XML file into a Registry object and parse it"""
        self.tree = etree.parse(file)
        self.parseTree()
    def setGenerator(self, gen):
        """Specify output generator object. None restores the default generator"""
        self.gen = gen
        self.gen.setRegistry(self)

    # addElementInfo - add information about an element to the
    # corresponding dictionary
    #   elem - <type>/<enums>/<enum>/<command>/<feature>/<extension> Element
    #   info - corresponding {Type|Group|Enum|Cmd|Feature}Info object
    #   infoName - 'type' / 'group' / 'enum' / 'command' / 'feature' / 'extension'
    #   dictionary - self.{type|group|enum|cmd|api|ext}dict
    # If the Element has an 'api' attribute, the dictionary key is the
    # tuple (name,api). If not, the key is the name. 'name' is an
    # attribute of the Element
    def addElementInfo(self, elem, info, infoName, dictionary):
        if ('api' in elem.attrib):
            key = (elem.get('name'),elem.get('api'))
        else:
            key = elem.get('name')
        if key in dictionary:
            self.gen.logMsg('warn', '*** Attempt to redefine',
                            infoName, 'with key:', key)
        else:
            dictionary[key] = info
    #
    # lookupElementInfo - find a {Type|Enum|Cmd}Info object by name.
    # If an object qualified by API name exists, use that.
    #   fname - name of type / enum / command
    #   dictionary - self.{type|enum|cmd}dict
    def lookupElementInfo(self, fname, dictionary):
        key = (fname, self.genOpts.apiname)
        if (key in dictionary):
            # self.gen.logMsg('diag', 'Found API-specific element for feature', fname)
            return dictionary[key]
        elif (fname in dictionary):
            # self.gen.logMsg('diag', 'Found generic element for feature', fname)
            return dictionary[fname]
        else:
            return None
    def parseTree(self):
        """Parse the registry Element, once created"""
        # This must be the Element for the root <registry>
        self.reg = self.tree.getroot()
        #
        # Create dictionary of registry types from toplevel <types> tags
        # and add 'name' attribute to each <type> tag (where missing)
        # based on its <name> element.
        #
        # There's usually one <types> block; more are OK
        # Required <type> attributes: 'name' or nested <name> tag contents
        self.typedict = {}
        for type in self.reg.findall('types/type'):
            # If the <type> doesn't already have a 'name' attribute, set
            # it from contents of its <name> tag.
            if (type.get('name') == None):
                type.attrib['name'] = type.find('name').text
            self.addElementInfo(type, TypeInfo(type), 'type', self.typedict)
        #
        # Create dictionary of registry enum groups from <enums> tags.
        #
        # Required <enums> attributes: 'name'. If no name is given, one is
        # generated, but that group can't be identified and turned into an
        # enum type definition - it's just a container for <enum> tags.
        self.groupdict = {}
        for group in self.reg.findall('enums'):
            self.addElementInfo(group, GroupInfo(group), 'group', self.groupdict)
        #
        # Create dictionary of registry enums from <enum> tags
        #
        # <enums> tags usually define different namespaces for the values
        #   defined in those tags, but the actual names all share the
        #   same dictionary.
        # Required <enum> attributes: 'name', 'value'
        # For containing <enums> which have type="enum" or type="bitmask",
        # tag all contained <enum>s are required. This is a stopgap until
        # a better scheme for tagging core and extension enums is created.
        self.enumdict = {}
        for enums in self.reg.findall('enums'):
            required = (enums.get('type') != None)
            for enum in enums.findall('enum'):
                enumInfo = EnumInfo(enum)
                enumInfo.required = required
                self.addElementInfo(enum, enumInfo, 'enum', self.enumdict)
        #
        # Create dictionary of registry commands from <command> tags
        # and add 'name' attribute to each <command> tag (where missing)
        # based on its <proto><name> element.
        #
        # There's usually only one <commands> block; more are OK.
        # Required <command> attributes: 'name' or <proto><name> tag contents
        self.cmddict = {}
        for cmd in self.reg.findall('commands/command'):
            # If the <command> doesn't already have a 'name' attribute, set
            # it from contents of its <proto><name> tag.
            if (cmd.get('name') == None):
                cmd.attrib['name'] = cmd.find('proto/name').text
            ci = CmdInfo(cmd)
            self.addElementInfo(cmd, ci, 'command', self.cmddict)
        #
        # Create dictionaries of API and extension interfaces
        #   from toplevel <api> and <extension> tags.
        #
        self.apidict = {}
        for feature in self.reg.findall('feature'):
            featureInfo = FeatureInfo(feature)
            self.addElementInfo(feature, featureInfo, 'feature', self.apidict)
        self.extensions = self.reg.findall('extensions/extension')
        self.extdict = {}
        for feature in self.extensions:
            featureInfo = FeatureInfo(feature)
            self.addElementInfo(feature, featureInfo, 'extension', self.extdict)

            # Add additional enums defined only in <extension> tags
            # to the corresponding core type.
            # When seen here, the <enum> element, processed to contain the
            # numeric enum value, is added to the corresponding <enums>
            # element, as well as adding to the enum dictionary. It is
            # *removed* from the <require> element it is introduced in.
            # Not doing this will cause spurious genEnum()
            # calls to be made in output generation, and it's easier
            # to handle here than in genEnum().
            #
            # In lxml.etree, an Element can have only one parent, so the
            # append() operation also removes the element. But in Python's
            # ElementTree package, an Element can have multiple parents. So
            # it must be explicitly removed from the <require> tag, leading
            # to the nested loop traversal of <require>/<enum> elements
            # below.
            #
            # This code also adds a 'extnumber' attribute containing the
            # extension number, used for enumerant value calculation.
            #
            # For <enum> tags which are actually just constants, if there's
            # no 'extends' tag but there is a 'value' or 'bitpos' tag, just
            # add an EnumInfo record to the dictionary. That works because
            # output generation of constants is purely dependency-based, and
            # doesn't need to iterate through the XML tags.
            #
            # Something like this will need to be done for 'feature's up
            # above, if we use the same mechanism for adding to the core
            # API in 1.1.
            #
            for elem in feature.findall('require'):
              for enum in elem.findall('enum'):
                addEnumInfo = False
                groupName = enum.get('extends')
                if (groupName != None):
                    # self.gen.logMsg('diag', '*** Found extension enum',
                    #     enum.get('name'))
                    # Add extension number attribute to the <enum> element
                    enum.attrib['extnumber'] = featureInfo.number
                    enum.attrib['extname'] = featureInfo.name
                    enum.attrib['supported'] = featureInfo.supported
                    # Look up the GroupInfo with matching groupName
                    if (groupName in self.groupdict.keys()):
                        # self.gen.logMsg('diag', '*** Matching group',
                        #     groupName, 'found, adding element...')
                        gi = self.groupdict[groupName]
                        gi.elem.append(enum)
                        # Remove element from parent <require> tag
                        # This should be a no-op in lxml.etree
                        elem.remove(enum)
                    else:
                        self.gen.logMsg('warn', '*** NO matching group',
                            groupName, 'for enum', enum.get('name'), 'found.')
                    addEnumInfo = True
                elif (enum.get('value') or enum.get('bitpos')):
                    # self.gen.logMsg('diag', '*** Adding extension constant "enum"',
                    #     enum.get('name'))
                    addEnumInfo = True
                if (addEnumInfo):
                    enumInfo = EnumInfo(enum)
                    self.addElementInfo(enum, enumInfo, 'enum', self.enumdict)
    def dumpReg(self, maxlen = 40, filehandle = sys.stdout):
        """Dump all the dictionaries constructed from the Registry object"""
        write('***************************************', file=filehandle)
        write('    ** Dumping Registry contents **',     file=filehandle)
        write('***************************************', file=filehandle)
        write('// Types', file=filehandle)
        for name in self.typedict:
            tobj = self.typedict[name]
            write('    Type', name, '->', etree.tostring(tobj.elem)[0:maxlen], file=filehandle)
        write('// Groups', file=filehandle)
        for name in self.groupdict:
            gobj = self.groupdict[name]
            write('    Group', name, '->', etree.tostring(gobj.elem)[0:maxlen], file=filehandle)
        write('// Enums', file=filehandle)
        for name in self.enumdict:
            eobj = self.enumdict[name]
            write('    Enum', name, '->', etree.tostring(eobj.elem)[0:maxlen], file=filehandle)
        write('// Commands', file=filehandle)
        for name in self.cmddict:
            cobj = self.cmddict[name]
            write('    Command', name, '->', etree.tostring(cobj.elem)[0:maxlen], file=filehandle)
        write('// APIs', file=filehandle)
        for key in self.apidict:
            write('    API Version ', key, '->',
                etree.tostring(self.apidict[key].elem)[0:maxlen], file=filehandle)
        write('// Extensions', file=filehandle)
        for key in self.extdict:
            write('    Extension', key, '->',
                etree.tostring(self.extdict[key].elem)[0:maxlen], file=filehandle)
        # write('***************************************', file=filehandle)
        # write('    ** Dumping XML ElementTree **', file=filehandle)
        # write('***************************************', file=filehandle)
        # write(etree.tostring(self.tree.getroot(),pretty_print=True), file=filehandle)
    #
    # typename - name of type
    # required - boolean (to tag features as required or not)
    def markTypeRequired(self, typename, required):
        """Require (along with its dependencies) or remove (but not its dependencies) a type"""
        self.gen.logMsg('diag', '*** tagging type:', typename, '-> required =', required)
        # Get TypeInfo object for <type> tag corresponding to typename
        type = self.lookupElementInfo(typename, self.typedict)
        if (type != None):
            if (required):
                # Tag type dependencies in 'required' attributes as
                # required. This DOES NOT un-tag dependencies in a <remove>
                # tag. See comments in markRequired() below for the reason.
                if ('requires' in type.elem.attrib):
                    depType = type.elem.get('requires')
                    self.gen.logMsg('diag', '*** Generating dependent type',
                        depType, 'for type', typename)
                    self.markTypeRequired(depType, required)
                # Tag types used in defining this type (e.g. in nested
                # <type> tags)
                # Look for <type> in entire <command> tree,
                # not just immediate children
                for subtype in type.elem.findall('.//type'):
                    self.gen.logMsg('diag', '*** markRequired: type requires dependent <type>', subtype.text)
                    self.markTypeRequired(subtype.text, required)
                # Tag enums used in defining this type, for example in
                #   <member><name>member</name>[<enum>MEMBER_SIZE</enum>]</member>
                for subenum in type.elem.findall('.//enum'):
                    self.gen.logMsg('diag', '*** markRequired: type requires dependent <enum>', subenum.text)
                    self.markEnumRequired(subenum.text, required)
            type.required = required
        else:
            self.gen.logMsg('warn', '*** type:', typename , 'IS NOT DEFINED')
    #
    # enumname - name of enum
    # required - boolean (to tag features as required or not)
    def markEnumRequired(self, enumname, required):
        self.gen.logMsg('diag', '*** tagging enum:', enumname, '-> required =', required)
        enum = self.lookupElementInfo(enumname, self.enumdict)
        if (enum != None):
            enum.required = required
        else:
            self.gen.logMsg('warn', '*** enum:', enumname , 'IS NOT DEFINED')
    #
    # features - Element for <require> or <remove> tag
    # required - boolean (to tag features as required or not)
    def markRequired(self, features, required):
        """Require or remove features specified in the Element"""
        self.gen.logMsg('diag', '*** markRequired (features = <too long to print>, required =', required, ')')
        # Loop over types, enums, and commands in the tag
        # @@ It would be possible to respect 'api' and 'profile' attributes
        #  in individual features, but that's not done yet.
        for typeElem in features.findall('type'):
            self.markTypeRequired(typeElem.get('name'), required)
        for enumElem in features.findall('enum'):
            self.markEnumRequired(enumElem.get('name'), required)
        for cmdElem in features.findall('command'):
            name = cmdElem.get('name')
            self.gen.logMsg('diag', '*** tagging command:', name, '-> required =', required)
            cmd = self.lookupElementInfo(name, self.cmddict)
            if (cmd != None):
                cmd.required = required
                # Tag all parameter types of this command as required.
                # This DOES NOT remove types of commands in a <remove>
                # tag, because many other commands may use the same type.
                # We could be more clever and reference count types,
                # instead of using a boolean.
                if (required):
                    # Look for <type> in entire <command> tree,
                    # not just immediate children
                    for type in cmd.elem.findall('.//type'):
                        self.gen.logMsg('diag', '*** markRequired: command implicitly requires dependent type', type.text)
                        self.markTypeRequired(type.text, required)
            else:
                self.gen.logMsg('warn', '*** command:', name, 'IS NOT DEFINED')
    #
    # interface - Element for <version> or <extension>, containing
    #   <require> and <remove> tags
    # api - string specifying API name being generated
    # profile - string specifying API profile being generated
    def requireAndRemoveFeatures(self, interface, api, profile):
        """Process <recquire> and <remove> tags for a <version> or <extension>"""
        # <require> marks things that are required by this version/profile
        for feature in interface.findall('require'):
            if (matchAPIProfile(api, profile, feature)):
                self.markRequired(feature,True)
        # <remove> marks things that are removed by this version/profile
        for feature in interface.findall('remove'):
            if (matchAPIProfile(api, profile, feature)):
                self.markRequired(feature,False)

    def assignAdditionalValidity(self, interface, api, profile):
        #
        # Loop over all usage inside all <require> tags.
        for feature in interface.findall('require'):
            if (matchAPIProfile(api, profile, feature)):
                for v in feature.findall('usage'):
                    if v.get('command'):
                        self.cmddict[v.get('command')].additionalValidity.append(copy.deepcopy(v))
                    if v.get('struct'):
                        self.typedict[v.get('struct')].additionalValidity.append(copy.deepcopy(v))

        #
        # Loop over all usage inside all <remove> tags.
        for feature in interface.findall('remove'):
            if (matchAPIProfile(api, profile, feature)):
                for v in feature.findall('usage'):
                    if v.get('command'):
                        self.cmddict[v.get('command')].removedValidity.append(copy.deepcopy(v))
                    if v.get('struct'):
                        self.typedict[v.get('struct')].removedValidity.append(copy.deepcopy(v))

    #
    # generateFeature - generate a single type / enum group / enum / command,
    # and all its dependencies as needed.
    #   fname - name of feature (<type>/<enum>/<command>)
    #   ftype - type of feature, 'type' | 'enum' | 'command'
    #   dictionary - of *Info objects - self.{type|enum|cmd}dict
    def generateFeature(self, fname, ftype, dictionary):
        f = self.lookupElementInfo(fname, dictionary)
        if (f == None):
            # No such feature. This is an error, but reported earlier
            self.gen.logMsg('diag', '*** No entry found for feature', fname,
                            'returning!')
            return
        #
        # If feature isn't required, or has already been declared, return
        if (not f.required):
            self.gen.logMsg('diag', '*** Skipping', ftype, fname, '(not required)')
            return
        if (f.declared):
            self.gen.logMsg('diag', '*** Skipping', ftype, fname, '(already declared)')
            return
        # Always mark feature declared, as though actually emitted
        f.declared = True
        #
        # Pull in dependent declaration(s) of the feature.
        # For types, there may be one type in the 'required' attribute of
        #   the element, as well as many in imbedded <type> and <enum> tags
        #   within the element.
        # For commands, there may be many in <type> tags within the element.
        # For enums, no dependencies are allowed (though perhaps if you
        #   have a uint64 enum, it should require GLuint64).
        genProc = None
        if (ftype == 'type'):
            genProc = self.gen.genType
            if ('requires' in f.elem.attrib):
                depname = f.elem.get('requires')
                self.gen.logMsg('diag', '*** Generating required dependent type',
                                depname)
                self.generateFeature(depname, 'type', self.typedict)
            for subtype in f.elem.findall('.//type'):
                self.gen.logMsg('diag', '*** Generating required dependent <type>',
                    subtype.text)
                self.generateFeature(subtype.text, 'type', self.typedict)
            for subtype in f.elem.findall('.//enum'):
                self.gen.logMsg('diag', '*** Generating required dependent <enum>',
                    subtype.text)
                self.generateFeature(subtype.text, 'enum', self.enumdict)
            # If the type is an enum group, look up the corresponding
            # group in the group dictionary and generate that instead.
            if (f.elem.get('category') == 'enum'):
                self.gen.logMsg('diag', '*** Type', fname, 'is an enum group, so generate that instead')
                group = self.lookupElementInfo(fname, self.groupdict)
                if (group == None):
                    # Unless this is tested for, it's probably fatal to call below
                    genProc = None
                    self.logMsg('warn', '*** NO MATCHING ENUM GROUP FOUND!!!')
                else:
                    genProc = self.gen.genGroup
                    f = group
        elif (ftype == 'command'):
            genProc = self.gen.genCmd
            for type in f.elem.findall('.//type'):
                depname = type.text
                self.gen.logMsg('diag', '*** Generating required parameter type',
                                depname)
                self.generateFeature(depname, 'type', self.typedict)
        elif (ftype == 'enum'):
            genProc = self.gen.genEnum
        # Actually generate the type only if emitting declarations
        if self.emitFeatures:
            self.gen.logMsg('diag', '*** Emitting', ftype, 'decl for', fname)
            genProc(f, fname)
        else:
            self.gen.logMsg('diag', '*** Skipping', ftype, fname,
                            '(not emitting this feature)')
    #
    # generateRequiredInterface - generate all interfaces required
    # by an API version or extension
    #   interface - Element for <version> or <extension>
    def generateRequiredInterface(self, interface):
        """Generate required C interface for specified API version/extension"""

        #
        # Loop over all features inside all <require> tags.
        for features in interface.findall('require'):
            for t in features.findall('type'):
                self.generateFeature(t.get('name'), 'type', self.typedict)
            for e in features.findall('enum'):
                self.generateFeature(e.get('name'), 'enum', self.enumdict)
            for c in features.findall('command'):
                self.generateFeature(c.get('name'), 'command', self.cmddict)

    #
    # apiGen(genOpts) - generate interface for specified versions
    #   genOpts - GeneratorOptions object with parameters used
    #   by the Generator object.
    def apiGen(self, genOpts):
        """Generate interfaces for the specified API type and range of versions"""
        #
        self.gen.logMsg('diag', '*******************************************')
        self.gen.logMsg('diag', '  Registry.apiGen file:', genOpts.filename,
                        'api:', genOpts.apiname,
                        'profile:', genOpts.profile)
        self.gen.logMsg('diag', '*******************************************')
        #
        self.genOpts = genOpts
        # Reset required/declared flags for all features
        self.apiReset()
        #
        # Compile regexps used to select versions & extensions
        regVersions = re.compile(self.genOpts.versions)
        regEmitVersions = re.compile(self.genOpts.emitversions)
        regAddExtensions = re.compile(self.genOpts.addExtensions)
        regRemoveExtensions = re.compile(self.genOpts.removeExtensions)
        #
        # Get all matching API versions & add to list of FeatureInfo
        features = []
        apiMatch = False
        for key in self.apidict:
            fi = self.apidict[key]
            api = fi.elem.get('api')
            if (api == self.genOpts.apiname):
                apiMatch = True
                if (regVersions.match(fi.version)):
                    # Matches API & version #s being generated. Mark for
                    # emission and add to the features[] list .
                    # @@ Could use 'declared' instead of 'emit'?
                    fi.emit = (regEmitVersions.match(fi.version) != None)
                    features.append(fi)
                    if (not fi.emit):
                        self.gen.logMsg('diag', '*** NOT tagging feature api =', api,
                            'name =', fi.name, 'version =', fi.version,
                            'for emission (does not match emitversions pattern)')
                else:
                    self.gen.logMsg('diag', '*** NOT including feature api =', api,
                        'name =', fi.name, 'version =', fi.version,
                        '(does not match requested versions)')
            else:
                self.gen.logMsg('diag', '*** NOT including feature api =', api,
                    'name =', fi.name,
                    '(does not match requested API)')
        if (not apiMatch):
            self.gen.logMsg('warn', '*** No matching API versions found!')
        #
        # Get all matching extensions, in order by their extension number,
        # and add to the list of features.
        # Start with extensions tagged with 'api' pattern matching the API
        # being generated. Add extensions matching the pattern specified in
        # regExtensions, then remove extensions matching the pattern
        # specified in regRemoveExtensions
        for (extName,ei) in sorted(self.extdict.items(),key = lambda x : x[1].number):
            extName = ei.name
            include = False
            #
            # Include extension if defaultExtensions is not None and if the
            # 'supported' attribute matches defaultExtensions. The regexp in
            # 'supported' must exactly match defaultExtensions, so bracket
            # it with ^(pat)$.
            pat = '^(' + ei.elem.get('supported') + ')$'
            if (self.genOpts.defaultExtensions and
                     re.match(pat, self.genOpts.defaultExtensions)):
                self.gen.logMsg('diag', '*** Including extension',
                    extName, "(defaultExtensions matches the 'supported' attribute)")
                include = True
            #
            # Include additional extensions if the extension name matches
            # the regexp specified in the generator options. This allows
            # forcing extensions into an interface even if they're not
            # tagged appropriately in the registry.
            if (regAddExtensions.match(extName) != None):
                self.gen.logMsg('diag', '*** Including extension',
                    extName, '(matches explicitly requested extensions to add)')
                include = True
            # Remove extensions if the name matches the regexp specified
            # in generator options. This allows forcing removal of
            # extensions from an interface even if they're tagged that
            # way in the registry.
            if (regRemoveExtensions.match(extName) != None):
                self.gen.logMsg('diag', '*** Removing extension',
                    extName, '(matches explicitly requested extensions to remove)')
                include = False
            #
            # If the extension is to be included, add it to the
            # extension features list.
            if (include):
                ei.emit = True
                features.append(ei)
            else:
                self.gen.logMsg('diag', '*** NOT including extension',
                    extName, '(does not match api attribute or explicitly requested extensions)')
        #
        # Sort the extension features list, if a sort procedure is defined
        if (self.genOpts.sortProcedure):
            self.genOpts.sortProcedure(features)
        #
        # Pass 1: loop over requested API versions and extensions tagging
        #   types/commands/features as required (in an <require> block) or no
        #   longer required (in an <remove> block). It is possible to remove
        #   a feature in one version and restore it later by requiring it in
        #   a later version.
        # If a profile other than 'None' is being generated, it must
        #   match the profile attribute (if any) of the <require> and
        #   <remove> tags.
        self.gen.logMsg('diag', '*** PASS 1: TAG FEATURES ********************************************')
        for f in features:
            self.gen.logMsg('diag', '*** PASS 1: Tagging required and removed features for',
                f.name)
            self.requireAndRemoveFeatures(f.elem, self.genOpts.apiname, self.genOpts.profile)
            self.assignAdditionalValidity(f.elem, self.genOpts.apiname, self.genOpts.profile)
        #
        # Pass 2: loop over specified API versions and extensions printing
        #   declarations for required things which haven't already been
        #   generated.
        self.gen.logMsg('diag', '*** PASS 2: GENERATE INTERFACES FOR FEATURES ************************')
        self.gen.beginFile(self.genOpts)
        for f in features:
            self.gen.logMsg('diag', '*** PASS 2: Generating interface for',
                f.name)
            emit = self.emitFeatures = f.emit
            if (not emit):
                self.gen.logMsg('diag', '*** PASS 2: NOT declaring feature',
                    f.elem.get('name'), 'because it is not tagged for emission')
            # Generate the interface (or just tag its elements as having been
            # emitted, if they haven't been).
            self.gen.beginFeature(f.elem, emit)
            self.generateRequiredInterface(f.elem)
            self.gen.endFeature()
        self.gen.endFile()
    #
    # apiReset - use between apiGen() calls to reset internal state
    #
    def apiReset(self):
        """Reset type/enum/command dictionaries before generating another API"""
        for type in self.typedict:
            self.typedict[type].resetState()
        for enum in self.enumdict:
            self.enumdict[enum].resetState()
        for cmd in self.cmddict:
            self.cmddict[cmd].resetState()
        for cmd in self.apidict:
            self.apidict[cmd].resetState()
    #
    # validateGroups - check that group= attributes match actual groups
    #
    def validateGroups(self):
        """Validate group= attributes on <param> and <proto> tags"""
        # Keep track of group names not in <group> tags
        badGroup = {}
        self.gen.logMsg('diag', '*** VALIDATING GROUP ATTRIBUTES ***')
        for cmd in self.reg.findall('commands/command'):
            proto = cmd.find('proto')
            funcname = cmd.find('proto/name').text
            if ('group' in proto.attrib.keys()):
                group = proto.get('group')
                # self.gen.logMsg('diag', '*** Command ', funcname, ' has return group ', group)
                if (group not in self.groupdict.keys()):
                    # self.gen.logMsg('diag', '*** Command ', funcname, ' has UNKNOWN return group ', group)
                    if (group not in badGroup.keys()):
                        badGroup[group] = 1
                    else:
                        badGroup[group] = badGroup[group] +  1
            for param in cmd.findall('param'):
                pname = param.find('name')
                if (pname != None):
                    pname = pname.text
                else:
                    pname = type.get('name')
                if ('group' in param.attrib.keys()):
                    group = param.get('group')
                    if (group not in self.groupdict.keys()):
                        # self.gen.logMsg('diag', '*** Command ', funcname, ' param ', pname, ' has UNKNOWN group ', group)
                        if (group not in badGroup.keys()):
                            badGroup[group] = 1
                        else:
                            badGroup[group] = badGroup[group] +  1
        if (len(badGroup.keys()) > 0):
            self.gen.logMsg('diag', '*** SUMMARY OF UNRECOGNIZED GROUPS ***')
            for key in sorted(badGroup.keys()):
                self.gen.logMsg('diag', '    ', key, ' occurred ', badGroup[key], ' times')
Beispiel #6
0
    def endFeature(self):
        if self.emit:
            # first write all types into types.d

            # special treat for platform surface extension which get wraped into a version block
            extIndent = self.surfaceExtensionVersionIndent
            self.typesFileContent += "\n{0}\n".format(self.currentFeature)
            surfaceVersion = ""
            if self.isSurfaceExtension:
                surfaceVersion = "version({0}) {{".format(
                    self.surfaceExtensions[self.currentFeature][0])
                self.typesFileContent += "{0}\n\t{1}\n".format(
                    surfaceVersion,
                    self.surfaceExtensions[self.currentFeature][1])

            isFirstSectionInFeature = True  # for output file formating
            for section in self.TYPE_SECTIONS:
                # write contents of type section
                contents = self.sections[section]
                if contents:
                    # check if opaque structs were registered and write tem into types file
                    if section == 'struct':
                        if self.opaqueStruct:
                            for opaque in self.opaqueStruct:
                                self.typesFileContent += "{1}struct {0};\n".format(
                                    opaque, extIndent)
                            self.typesFileContent += '\n'

                    elif not isFirstSectionInFeature:
                        self.typesFileContent += '\n'

                    # for output file formating
                    isFirstSectionInFeature = False

                    # write the rest of the contents, eg. enums, structs, etc. into types file
                    for content in self.sections[section]:
                        self.typesFileContent += "{1}{0}\n".format(
                            content, extIndent)

            if self.isSurfaceExtension:
                self.typesFileContent += "}\n"

            # currently the commandPointer token is not used
            if self.genOpts.genFuncPointers and self.sections['commandPointer']:
                if self.isSurfaceExtension:
                    write(surfaceVersion, file=self.funcsFile)
                write(extIndent +
                      ('\n' + extIndent).join(self.sections['commandPointer']),
                      file=self.funcsFile)
                if self.isSurfaceExtension: write("}", file=self.funcsFile)
                write('', file=self.funcsFile)

            # write function aliases into functions.d and build strings for later injection
            if self.sections['command']:
                # update indention of currentFeature for functions.d content
                self.currentFeature = "\t" + self.currentFeature

                # write the aliases to function types
                write("\n{0}".format(self.currentFeature), file=self.funcsFile)
                if self.isSurfaceExtension:
                    write("\t" + surfaceVersion, file=self.funcsFile)
                write(extIndent +
                      ('\n' + extIndent).join(self.sections['command']),
                      file=self.funcsFile)
                if self.isSurfaceExtension: write("\t}", file=self.funcsFile)

                # capture if function is a instance or device level function
                inInstanceLevelFuncNames = False
                inDeviceLevelFuncNames = False

                # comment the current feature
                self.functionTypeDefinition += "\n\n{0}".format(
                    self.currentFeature)

                # surface extension version directive
                if self.isSurfaceExtension:
                    self.functionTypeDefinition += "\n\t" + surfaceVersion

                # create string of functionTypes functionVars
                for command in self.sections['command']:
                    name = self.functionTypeName[command]
                    self.functionTypeDefinition += "\n\t{1}PFN_{0} {0};".format(
                        name, extIndent)

                    # query if the current function is in instance or deviceLevelFuncNames for the next step
                    if not inInstanceLevelFuncNames and name in self.instanceLevelFuncNames:
                        inInstanceLevelFuncNames = True

                    if not inDeviceLevelFuncNames and name in self.deviceLevelFuncNames:
                        inDeviceLevelFuncNames = True

                # surface extension version closing curly brace
                if self.isSurfaceExtension:
                    self.functionTypeDefinition += "\n\t}"

                # create a strings to load instance level functions
                if inInstanceLevelFuncNames:
                    # comment the current feature
                    self.instanceLevelFunctions += "\n\n{0}".format(
                        self.currentFeature)

                    # surface extension version directive
                    if self.isSurfaceExtension:
                        self.instanceLevelFunctions += "\n\t" + surfaceVersion

                    # set of global level function names, function pointers are ignored here are set in endFile method
                    gloablLevelFuncNames = {
                        "vkGetInstanceProcAddr",
                        "vkEnumerateInstanceExtensionProperties",
                        "vkEnumerateInstanceLayerProperties",
                        "vkCreateInstance"
                    }

                    # build the commands
                    for command in self.sections['command']:
                        name = self.functionTypeName[command]
                        if name in self.instanceLevelFuncNames and name not in gloablLevelFuncNames:
                            self.instanceLevelFunctions += "\n\t{1}{0} = cast(typeof({0})) vkGetInstanceProcAddr(instance, \"{0}\");".format(
                                name, extIndent)

                    # surface extension version closing curly brace
                    if self.isSurfaceExtension:
                        self.instanceLevelFunctions += "\n\t}"

                # create a strings to load device level functions
                if inDeviceLevelFuncNames:
                    # comment the current feature
                    self.deviceLevelFunctions += "\n\n{0}".format(
                        self.currentFeature)

                    # surface extension version directive
                    if self.isSurfaceExtension:
                        self.deviceLevelFunctions += "\n\t" + surfaceVersion

                    # build the commands
                    for command in self.sections['command']:
                        name = self.functionTypeName[command]
                        if name in self.deviceLevelFuncNames:
                            self.deviceLevelFunctions += "\n\t{1}{0} = cast(typeof({0})) vkGet{{INSTANCE_OR_DEVICE}}ProcAddr({{instance_or_device}}, \"{0}\");".format(
                                name, extIndent)

                            # this function type definitions end up in the DispatchDevice struct
                            self.dispatchTypeDefinition += "\n\t{1}PFN_{0} {0};".format(
                                name, extIndent)

                    # surface extension version closing curly brace
                    if self.isSurfaceExtension:
                        self.deviceLevelFunctions += "\n\t}"

        # Finish processing in superclass
        OutputGenerator.endFeature(self)
Beispiel #7
0
	def endFeature(self):
		if self.emit:
			# first write all types into types.d

			# special treat for platform surface extension which get wraped into a version block
			extIndent = self.surfaceExtensionVersionIndent
			self.typesFileContent += "\n{0}\n".format(self.currentFeature)
			surfaceVersion = ""
			if self.isSurfaceExtension:
				surfaceVersion = "version({0}) {{".format(self.surfaceExtensions[self.currentFeature][0])
				self.typesFileContent += "{0}\n\t{1}\n".format(surfaceVersion, self.surfaceExtensions[self.currentFeature][1])
			
			isFirstSectionInFeature = True		# for output file formating
			for section in self.TYPE_SECTIONS:
				# write contents of type section
				contents = self.sections[section]
				if contents:
					# check if opaque structs were registered and write tem into types file	
					if section == 'struct':
						if self.opaqueStruct:
							for opaque in self.opaqueStruct:
								self.typesFileContent += "{1}struct {0};\n".format(opaque, extIndent)
							self.typesFileContent += '\n'

					elif not isFirstSectionInFeature:
						self.typesFileContent += '\n'

					# for output file formating
					isFirstSectionInFeature = False

					# write the rest of the contents, eg. enums, structs, etc. into types file
					for content in self.sections[section]:
						self.typesFileContent += "{1}{0}\n".format(content, extIndent)

			if self.isSurfaceExtension:
				self.typesFileContent += "}\n"

			# currently the commandPointer token is not used
			if self.genOpts.genFuncPointers and self.sections['commandPointer']:
				if self.isSurfaceExtension: write(surfaceVersion, file=self.funcsFile)
				write(extIndent + ('\n' + extIndent).join(self.sections['commandPointer']), file=self.funcsFile)
				if self.isSurfaceExtension: write("}", file=self.funcsFile)
				write('', file=self.funcsFile)

			# write function aliases into functions.d and build strings for later injection
			if self.sections['command']:
				# update indention of currentFeature for functions.d content
				self.currentFeature = "\t" + self.currentFeature;

				# write the aliases to function types
				write("\n{0}".format(self.currentFeature), file=self.funcsFile)
				if self.isSurfaceExtension: write("\t" + surfaceVersion, file=self.funcsFile)
				write(extIndent + ('\n' + extIndent).join(self.sections['command']), file=self.funcsFile)
				if self.isSurfaceExtension: write("\t}", file=self.funcsFile)

				# capture if function is a instance or device level function
				inInstanceLevelFuncNames = False
				inDeviceLevelFuncNames = False

				# comment the current feature
				self.functionTypeDefinition += "\n\n{0}".format(self.currentFeature)

				# surface extension version directive
				if self.isSurfaceExtension: self.functionTypeDefinition += "\n\t" + surfaceVersion

				# create string of functionTypes functionVars
				for command in self.sections['command']:
					name = self.functionTypeName[command]
					self.functionTypeDefinition += "\n\t{1}PFN_{0} {0};".format(name, extIndent)

					# query if the current function is in instance or deviceLevelFuncNames for the next step
					if not inInstanceLevelFuncNames and name in self.instanceLevelFuncNames:
						inInstanceLevelFuncNames = True

					if not inDeviceLevelFuncNames and name in self.deviceLevelFuncNames:
						inDeviceLevelFuncNames = True

				# surface extension version closing curly brace
				if self.isSurfaceExtension: self.functionTypeDefinition += "\n\t}"

				# create a strings to load instance level functions
				if inInstanceLevelFuncNames:
					# comment the current feature
					self.instanceLevelFunctions += "\n\n{0}".format(self.currentFeature)

					# surface extension version directive
					if self.isSurfaceExtension: self.instanceLevelFunctions += "\n\t" + surfaceVersion
					
					# set of global level function names, function pointers are ignored here are set in endFile method
					gloablLevelFuncNames = {"vkGetInstanceProcAddr", "vkEnumerateInstanceExtensionProperties", "vkEnumerateInstanceLayerProperties", "vkCreateInstance"}

					# build the commands
					for command in self.sections['command']:
						name = self.functionTypeName[command]
						if name in self.instanceLevelFuncNames and name not in gloablLevelFuncNames:
							self.instanceLevelFunctions += "\n\t{1}{0} = cast(typeof({0})) vkGetInstanceProcAddr(instance, \"{0}\");".format(name, extIndent)

					# surface extension version closing curly brace
					if self.isSurfaceExtension: self.instanceLevelFunctions += "\n\t}"

				# create a strings to load device level functions
				if inDeviceLevelFuncNames:
					# comment the current feature
					self.deviceLevelFunctions += "\n\n{0}".format(self.currentFeature)

					# surface extension version directive
					if self.isSurfaceExtension: self.deviceLevelFunctions += "\n\t" + surfaceVersion

					# build the commands
					for command in self.sections['command']:
						name = self.functionTypeName[command]
						if name in self.deviceLevelFuncNames:
							self.deviceLevelFunctions += "\n\t{1}{0} = cast(typeof({0})) vkGet{{INSTANCE_OR_DEVICE}}ProcAddr({{instance_or_device}}, \"{0}\");".format(name, extIndent)

							# this function type definitions end up in the DispatchDevice struct
							self.dispatchTypeDefinition += "\n\t{1}PFN_{0} {0};".format(name, extIndent)
					
					# surface extension version closing curly brace
					if self.isSurfaceExtension: self.deviceLevelFunctions += "\n\t}"	

		# Finish processing in superclass
		OutputGenerator.endFeature(self)
 def endFeature(self):
     # Finish processing in superclass
     OutputGenerator.endFeature(self)