def add_normalise_power_selector(self):
"""
Add a radio button to chose whether or not the power of all spectra
shouold be normalised to 1.
"""
pos_shp = [0.02, 0.8, 0.05, 0.104]
rax = self.ifft_fig.add_axes(pos_shp,
axisbg=AXCOLOUR,
title="normalise")
np_tuple = ("yes", "no")
self.normalise_power_selector = widgets.RadioButtons(rax,
np_tuple,
active=1)
self.normalise_power_selector.on_clicked(self.update_normalise_power)
def add_state_variable_selector(self):
"""
Generate radio selector buttons to set which state variable is displayed
on the x and y axis of the phase-plane plot.
"""
svx_ind = self.model.state_variables.index(self.svx)
svy_ind = self.model.state_variables.index(self.svy)
#State variable for the x axis
pos_shp = [0.07, 0.05, 0.065, 0.12+0.006*self.model.nvar]
rax = self.ipp_fig.add_axes(pos_shp, axisbg=AXCOLOUR, title="x-axis")
self.state_variable_x = widgets.RadioButtons(rax,
tuple(self.model.state_variables),
active=svx_ind)
self.state_variable_x.on_clicked(self.update_svx)
#State variable for the y axis
pos_shp = [0.14, 0.05, 0.065, 0.12+0.006*self.model.nvar]
rax = self.ipp_fig.add_axes(pos_shp, axisbg=AXCOLOUR, title="y-axis")
self.state_variable_y = widgets.RadioButtons(rax,
tuple(self.model.state_variables),
active=svy_ind)
self.state_variable_y.on_clicked(self.update_svy)
def add_yscale_selector(self):
"""
Add a radio button to the figure for selecting which scaling the y-axes
should use.
"""
pos_shp = [0.02, 0.5, 0.05, 0.104]
rax = self.ifft_fig.add_axes(pos_shp,
facecolor=AXCOLOUR,
title="yscale")
yscale_tuple = ("log", "linear")
self.yscale_selector = widgets.RadioButtons(rax,
yscale_tuple,
active=0)
self.yscale_selector.on_clicked(self.update_yscale)
def add_window_length_selector(self):
"""
Generate radio selector buttons to set the window length is seconds.
"""
noc = self.possible_window_lengths.shape[0] # number of choices
#State variable for the x axis
pos_shp = [0.88, 0.07, 0.1, 0.12 + 0.02 * noc]
rax = self.ifft_fig.add_axes(pos_shp,
facecolor=AXCOLOUR,
title="Segment length")
wl_tup = tuple(self.possible_window_lengths)
self.window_length_selector = widgets.RadioButtons(rax,
wl_tup,
active=4)
self.window_length_selector.on_clicked(self.update_window_length)
def add_variable_selector(self):
"""
Generate radio selector buttons to set which state variable is
displayed.
"""
noc = self.data.shape[1] # number of choices
#State variable for the x axis
pos_shp = [0.02, 0.22, 0.05, 0.12 + 0.008 * noc]
rax = self.ifft_fig.add_axes(pos_shp,
facecolor=AXCOLOUR,
title="state variable")
self.variable_selector = widgets.RadioButtons(rax,
tuple(range(noc)),
active=0)
self.variable_selector.on_clicked(self.update_variable)
def plotResModel(self, res_range=(0, 4), res_num=9):
"""
plot the resistivity model with finite element mesh on and scale is
in meters, which makes everything a lot easier to handle at the
moment.
"""
self._make_resisitivity_range(res_range[0], res_range[1], res_num)
# call plot2DmModel to draw figure and plot mesh grid
self.mesh_plot = self.plot2DModel(femesh="on", yscale="m")
# connect to a button press event for changing resistivity values in
# the plot
self.cid = self.mesh_plot.ax.figure.canvas.mpl_connect(
"button_press_event", self.get_mclick_xy
)
# connect to a key press event for changing resistivity values
self.cid_pmres = self.mesh_plot.ax.figure.canvas.mpl_connect(
"key_press_event", self.pmRes
)
# make a rectangular selector
self.rect_selector = widgets.RectangleSelector(
self.mesh_plot.ax, self.rect_onselect, drawtype="box", useblit=True
)
# make a radio boxe for changing the resistivity values easily
self.radio_res_ax = self.mesh_plot.fig.add_axes(self.radio_res_loc)
self.radio_res_labels = ["air", "sea"] + [
"{0:.4g}".format(rr) for rr in self.res_range[2:]
]
self.radio_res = widgets.RadioButtons(
self.radio_res_ax, self.radio_res_labels, active=self.res_ii
)
self.radio_res.on_clicked(self.set_res_value)
# calculate minimum block width
self.mesh_width = np.min(
[
abs(om.meshx[0, ii + 1] - xx)
for ii, xx in enumerate(self.meshx[0, 7:-7], 7)
]
)
self._caluculate_midpoints()
def add_window_function_selector(self):
"""
Generate radio selector buttons to set the windowing function.
"""
#TODO: add support for kaiser, requiers specification of beta.
wf_tup = ("None", "hamming", "bartlett", "blackman", "hanning")
noc = len(wf_tup) # number of choices
#State variable for the x axis
pos_shp = [0.88, 0.77, 0.085, 0.12 + 0.01 * noc]
rax = self.ifft_fig.add_axes(pos_shp,
facecolor=AXCOLOUR,
title="Windowing function")
self.window_function_selector = widgets.RadioButtons(rax,
wf_tup,
active=0)
self.window_function_selector.on_clicked(self.update_window_function)
def __init__(self, simulation):
self.simulation = simulation
self.fig = plt.figure()
self.scale_axes = plt.axes([0.25, 0.90, 0.65, 0.03])
self.scale_slider = wdg.Slider(self.scale_axes,
"Scale",
0.01,
16,
valinit=1)
self.h_offset_axes = plt.axes([0.25, 0.80, 0.65, 0.03])
self.h_offset_slider = wdg.Slider(self.h_offset_axes,
"Horizontal offset",
-math.pi,
math.pi,
valinit=0)
self.v_offset_axes = plt.axes([0.25, 0.70, 0.65, 0.03])
self.v_offset_slider = wdg.Slider(self.v_offset_axes,
"Vertical offset",
-math.pi,
math.pi,
valinit=0)
self.color_range_axes = plt.axes([0.25, 0.60, 0.65, 0.03])
self.color_range_slider = wdg.Slider(self.color_range_axes,
"Color range",
0,
200,
valinit=100)
self.width_axes = plt.axes([0.25, 0.50, 0.65, 0.03])
self.width_slider = wdg.Slider(self.width_axes,
"Width",
0,
100,
valinit=8,
valstep=1)
self.height_axes = plt.axes([0.25, 0.40, 0.65, 0.03])
self.height_slider = wdg.Slider(self.height_axes,
"Height",
0,
100,
valinit=1,
valstep=1)
self.z_axes = plt.axes([0.25, 0.30, 0.65, 0.03])
self.z_slider = wdg.Slider(self.z_axes, "z", -2, 2, valinit=0)
self.plane_axes = plt.axes([0.25, 0.1, 0.15, 0.15])
self.plane_radio = wdg.RadioButtons(self.plane_axes,
('XY', 'XZ', 'YZ'))
def setup():
#Setup figure
#Top, Bottom, Side with top and bottom plot sharing x axis
fig = plt.figure()
top = plt.subplot(221)
bot = plt.subplot(223, sharex=top)
sid = plt.subplot(122)
stklst = sorted(('AMZN', 'GE', 'GOOG', 'MSFT', 'YHOO', 'EBAY'))
fig = plot_data(stklst[0], fig, top, bot, sid)
#Setup for radio bottoms
axcolor = 'lightgoldenrodyellow'
ylen = len(stklst)/50.0
prop_radio = plt.axes([0.95, 1-ylen, 0.048, ylen], axisbg=axcolor)
radio = wd.RadioButtons(prop_radio, stklst)
return [fig, top, bot, sid, radio]
def setup():
stklst = sorted(('ABB', 'AMZN', 'GE', 'GOOG', 'MSFT', 'YHOO', 'EBAY'))
#Setup figure
#Top, Bottom, Side with top and bottom plot sharing x axis
fig = plt.figure()
top = plt.subplot2grid((3, 3), (0, 0), colspan=2)
bot = plt.subplot2grid((3, 3), (1, 0), colspan=2, sharex=top)
mlrn = plt.subplot2grid((3, 3), (2, 0), colspan=2, sharex=top)
sid = plt.subplot2grid((3, 3), (0, 2), rowspan=3)
fig = plot_data(stklst[0], fig, top, bot, mlrn, sid)
#Setup for radio bottoms
axcolor = 'lightgoldenrodyellow'
ylen = len(stklst) / 50.0
prop_radio = plt.axes([0.95, 1 - ylen, 0.048, ylen], axisbg=axcolor)
radio = wd.RadioButtons(prop_radio, stklst)
return [fig, top, bot, sid, mlrn, radio]
def main():
"""
Display a fits file choosen by a radio button
and allows to change the threshold with a slider
"""
# Display the canvas
fig, axis = plt.subplots()
plt.subplots_adjust(left=0.1, bottom=0.25)
# Get list of fits files
file_list = []
for _, _, file_list in os.walk('../data'):
break
fits_files = [
file_name for file_name in file_list
if file_name.split(".")[-1] == "fits"
]
# Define radio button
radio_axis = plt.axes([0.02, 0.5, 0.2, 0.3])
radio = widgets.RadioButtons(radio_axis, fits_files)
# Define slider axis
slider_axis = plt.axes([0.2, 0.1, 0.6, 0.105])
# Initialize Action class, display the first fits file
# and get the slider
action = Action(slider_axis, fig, axis)
action.radio_action(fits_files[0])
my_widget = action.my_widget
# Use event handler and show
radio.on_clicked(action.radio_action)
my_widget.on_changed(action.slider_action)
plt.show()
return 0
def radio_buttons(rax, labels, user_callback=None):
"""
rab = radio_buttons(rax, labels, user_callback=None)
Puts up radio buttons (only one selected at a time) for the strings
passed in the vector of strings "labels", in the matplotlib axes given by "rax".
On click, if the function user_callback is set, it will be called, with a string
as its single parameter-- that string will be the label of the selected button.
You can also access the string of the currently selected button through
rab.value_selected
Or, in Julia, with the PyCall syntax
rab[:value_selected]
"""
radio = Wid.RadioButtons(rax, labels)
if user_callback != None:
radio.on_clicked(user_callback)
return radio
def main():
dirpath, interactive = lib_args.get_args()
filepaths = scan_dir(dirpath)
# batch console output
if not interactive:
for filepath in filepaths:
print(filepath)
# graphic interaction
else:
fig, img_axis = plt.subplots(figsize=(10, 5))
plt.subplots_adjust(left=0.05, right=0.45, bottom=0.1, top=0.9)
buttons_axis = plt.axes([0.55, 0.1, 0.4, 0.8])
buttons = widgets.RadioButtons(buttons_axis, filepaths)
callback = UpdateFile(img_axis, fig)
buttons.on_clicked(callback)
callback(filepaths[0])
plt.show()
return 0
def __create_radio(self) -> None:
"""Build the radio widget."""
# create new axis for radio widget
x0 = self.bbox[0]
y0 = self.bbox[1]
width = self.bbox[2] / 3
height = self.bbox[3]
axis = self.figure.add_axes([x0, y0, width, height])
# formatting
axis.patch.set_facecolor('none')
axis.patch.set_edgecolor('none')
for edge in 'left', 'right', 'top', 'bottom':
axis.spines[edge].set_visible(False)
self.__radio_axis = axis
# create widget
options = {'activecolor': 'steelblue'}
options.update(self.radio_options)
self.__radio = widgets.RadioButtons(
axis, tuple(model.label for model in self.models), **options)
# update function
self.__radio.on_clicked(self.__radio_on_clicked)
def __init__(self):
self.param = {
"dust_type": "MW",
"tau_V": 1,
"geometry": "SHELL",
"dust_distrib": "homogeneous",
}
# generate the curves and plot them
# Use 1/microns for a better sampling
self.x = np.arange(0.35, 10.0, 0.1) / u.micron
self.x_Vband = 0.55
self.fig, self.ax = plt.subplots(figsize=(15, 10))
self.axatt = plt.subplot2grid((4, 2), (0, 0), colspan=2, rowspan=3)
self.axFF = plt.subplot2grid((4, 2), (3, 0), colspan=1, rowspan=1)
self.axalb = plt.subplot2grid((4, 2), (3, 1), colspan=1, rowspan=1)
self.fig.canvas.set_window_title("widget for WG00 RT model")
plt.subplots_adjust(bottom=0.15)
plt.subplots_adjust(left=0.35)
plt.subplots_adjust(hspace=0.8)
axcolor = "lightgoldenrodyellow"
self.rax_sketch = plt.axes([0.03, 0.68, 0.25, 0.32])
self.rax_sketch.axis("off")
rax = plt.axes([0.05, 0.52, 0.15, 0.15], facecolor=axcolor)
dust_type = wgt.RadioButtons(rax, ("MW", "SMC"))
dust_type.on_clicked(self.update_dust_type)
rax = plt.axes([0.05, 0.335, 0.15, 0.15], facecolor=axcolor)
geometry = wgt.RadioButtons(rax, ("SHELL", "CLOUDY", "DUSTY"))
geometry.on_clicked(self.update_geometry)
rax = plt.axes([0.05, 0.15, 0.15, 0.15], facecolor=axcolor)
distrib = wgt.RadioButtons(rax, ("Homogeneous", "Clumpy"))
distrib.on_clicked(self.update_dust_distrib)
rax = plt.axes([0.05, 0.03, 0.12, 0.08], facecolor=axcolor)
norm = wgt.CheckButtons(rax, (r"Normalised to A$_V$", ), (True, ))
norm.on_clicked(self.update_norm)
self.norm = True
rax = plt.axes([0.3, 0.05, 0.6, 0.0275])
tau_V = wgt.Slider(rax,
r"$\tau_V$",
0.5,
50,
valinit=self.param["tau_V"])
tau_V.on_changed(self.update_tau_V)
# Initialise WG00 model
self.att_model = WG00(
tau_V=self.param["tau_V"],
geometry=self.param["geometry"],
dust_type=self.param["dust_type"],
dust_distribution=self.param["dust_distrib"],
)
self.update_sketch()
self.update_att_curve()
plt.show()
def __init__(self):
self.param = {
'dust_type': 'MW',
'tau_V': 1,
'geometry': 'SHELL',
'dust_distrib': 'homogeneous'
}
# generate the curves and plot them
# Use 1/microns for a better sampling
self.x = np.arange(0.35, 10.0, 0.1) / u.micron
self.x_Vband = 0.55
self.fig, self.ax = plt.subplots(figsize=(15, 10))
self.axatt = plt.subplot2grid((4, 2), (0, 0), colspan=2, rowspan=3)
self.axFF = plt.subplot2grid((4, 2), (3, 0), colspan=1, rowspan=1)
self.axalb = plt.subplot2grid((4, 2), (3, 1), colspan=1, rowspan=1)
self.fig.canvas.set_window_title('widget for WG00 RT model')
plt.subplots_adjust(bottom=0.15)
plt.subplots_adjust(left=0.35)
plt.subplots_adjust(hspace=0.8)
axcolor = 'lightgoldenrodyellow'
self.rax_sketch = plt.axes([.03, .68, .25, .32])
self.rax_sketch.axis('off')
rax = plt.axes([0.05, 0.52, 0.15, 0.15], facecolor=axcolor)
dust_type = wgt.RadioButtons(rax, ('MW', 'SMC'))
dust_type.on_clicked(self.update_dust_type)
rax = plt.axes([0.05, 0.335, 0.15, 0.15], facecolor=axcolor)
geometry = wgt.RadioButtons(rax, ('SHELL', 'CLOUDY', 'DUSTY'))
geometry.on_clicked(self.update_geometry)
rax = plt.axes([0.05, 0.15, 0.15, 0.15], facecolor=axcolor)
distrib = wgt.RadioButtons(rax, ('Homogeneous', 'Clumpy'))
distrib.on_clicked(self.update_dust_distrib)
rax = plt.axes([0.05, 0.03, 0.12, 0.08], facecolor=axcolor)
norm = wgt.CheckButtons(rax, (r'Normalised to A$_V$', ), (True, ))
norm.on_clicked(self.update_norm)
self.norm = True
rax = plt.axes([.3, .05, .6, .0275])
tau_V = wgt.Slider(rax,
r'$\tau_V$',
0.5,
50,
valinit=self.param['tau_V'])
tau_V.on_changed(self.update_tau_V)
# Initialise WG00 model
self.att_model = WG00(tau_V=self.param['tau_V'],
geometry=self.param['geometry'],
dust_type=self.param['dust_type'],
dust_distribution=self.param['dust_distrib'])
self.update_sketch()
self.update_att_curve()
plt.show()
def kwargs_to_mpl_widgets(kwargs, params, update, slider_format_strings):
n_opts = 0
n_radio = 0
n_sliders = 0
for key, val in kwargs.items():
if isinstance(val, set):
new_opts = extract_num_options(val)
if new_opts > 0:
n_radio += 1
n_opts += new_opts
elif (not isinstance(val, mwidgets.AxesWidget)
and not isinstance(val, widgets.fixed)
and isinstance(val, Iterable) and len(val) > 1):
n_sliders += 1
# These are roughly the sizes used in the matplotlib widget tutorial
# https://matplotlib.org/3.2.2/gallery/widgets/slider_demo.html#sphx-glr-gallery-widgets-slider-demo-py
slider_in = 0.15
radio_in = 0.6 / 3
widget_gap_in = 0.1
widget_inches = (n_sliders * slider_in + n_opts * radio_in +
widget_gap_in * (n_sliders + n_radio + 1) + 0.5
) # half an inch for margin
fig = None
if not all(
map(lambda x: isinstance(x, mwidgets.AxesWidget),
kwargs.values())):
# if the only kwargs are existing matplotlib widgets don't make a new figure
with ioff:
fig = figure()
size = fig.get_size_inches()
fig_h = widget_inches
fig.set_size_inches(size[0], widget_inches)
slider_height = slider_in / fig_h
radio_height = radio_in / fig_h
# radio
gap_height = widget_gap_in / fig_h
widget_y = 0.05
slider_ax = []
sliders = []
radio_ax = []
radio_buttons = []
cbs = []
for key, val in kwargs.items():
if isinstance(val, set):
if len(val) == 1:
val = val.pop()
if isinstance(val, tuple):
pass
else:
params[key] = val
continue
else:
val = list(val)
n = len(val)
longest_len = max(list(map(lambda x: len(list(x)), map(str, val))))
# should probably use something based on fontsize rather that .015
width = max(0.15, 0.015 * longest_len)
radio_ax.append(
axes([
0.2, 0.9 - widget_y - radio_height * n, width,
radio_height * n
]))
widget_y += radio_height * n + gap_height
radio_buttons.append(
mwidgets.RadioButtons(radio_ax[-1], val, active=0))
cbs.append(radio_buttons[-1].on_clicked(
partial(changeify, key=key, update=update)))
params[key] = val[0]
elif isinstance(val, mwidgets.RadioButtons):
val.on_clicked(partial(changeify, key=key, update=update))
params[key] = val.val
elif isinstance(val, mwidgets.Slider):
val.on_changed(partial(changeify, key=key, update=update))
params[key] = val.val
else:
if isinstance(val, tuple):
if len(val) == 2:
min_ = val[0]
max_ = val[1]
elif len(val) == 3:
# should warn that that doesn't make sense with matplotlib sliders
min_ = val[0]
max_ = val[1]
else:
val = np.atleast_1d(val)
if val.ndim > 1:
raise ValueError(
f"{key} is {val.ndim}D but can only be 1D or a scalar")
if len(val) == 1:
# don't need to create a slider
params[key] = val[0]
continue
else:
# list or numpy array
# should warn here as well
min_ = np.min(val)
max_ = np.max(val)
slider_ax.append(
axes([0.2, 0.9 - widget_y - gap_height, 0.65, slider_height]))
sliders.append(
mwidgets.Slider(
slider_ax[-1],
key,
min_,
max_,
valinit=min_,
valfmt=slider_format_strings[key],
))
cbs.append(sliders[-1].on_changed(
partial(changeify, key=key, update=update)))
widget_y += slider_height + gap_height
params[key] = min_
controls = [fig, radio_ax, radio_buttons, slider_ax, sliders]
return controls
def __init__(self, datapath):
"""Initialization"""
# object that handles output data
self._data = OutputData.OutputData(datapath)
# time dependent data for plotting
self._scalar_t = self._data.get_scalar_t()
self._mode_t = self._data.get_mode_t()
# initial parameters
self._iscalar = 0 # scalar index
self._imode = 0 # mode index
self._itime = 0 # time index
self._itime1 = 0 # time range index 1
self._itime2 = self._data.ntime # time range index 2
self._ispecies = self._data.nspecies # species index
self._iptcldist = 0 # 0: g; 1: f; 2: delta f
self._ani_playing = False # whether animation is playing
# colormap
cdict = {
'red': [(0.0, 0.0, 0.0), (0.5, 1.0, 1.0), (1.0, 1.0, 1.0)],
'green': [(0.0, 0.0, 0.0), (0.5, 1.0, 1.0), (1.0, 0.0, 0.0)],
'blue': [(0.0, 1.0, 1.0), (0.5, 1.0, 1.0), (1.0, 0.0, 0.0)]
}
self._cmap = mpl.colors.LinearSegmentedColormap('BWR', cdict, 256)
self._levels = (np.arange(64) - 31.5) / 31.5
# layout
self._fig = plt.figure(figsize=(22, 11))
self._fig.canvas.set_window_title(os.path.abspath(datapath))
# plots
self._ax_scalar_t = self._fig.add_axes([0.04, 0.53, 0.18, 0.44])
self._ax_mode_t = self._fig.add_axes([0.04, 0.045, 0.18, 0.44])
self._ax_mode_amp_t = self._fig.add_axes([0.26, 0.53, 0.18, 0.44])
self._ax_mode_norm_t = self._fig.add_axes([0.26, 0.045, 0.18, 0.44])
self._ax_field_x = self._fig.add_axes([0.58, 0.53, 0.18, 0.44])
#self._ax_chargeden_x = self._fig.add_axes([0.54, 0.045, 0.22, 0.44])
self._ax_ptcldist_xv = self._fig.add_axes([0.8, 0.53, 0.16, 0.44])
self._ax_ptcldist_xv_colorbar = self._fig.add_axes(
[0.965, 0.53, 0.01, 0.44])
self._ax_ptcldist_v = self._fig.add_axes([0.8, 0.045, 0.18, 0.44])
# widgets
self._ax_scalar_chooser = self._fig.add_axes([0.45, 0.85, 0.08, 0.1])
self._ax_scalar_chooser.set_title('Scalar')
self._ax_mode_chooser = self._fig.add_axes([0.45, 0.7, 0.08, 0.1])
self._ax_mode_chooser.set_title('Fourier mode')
self._ax_ptcldist_chooser = self._fig.add_axes([0.45, 0.55, 0.08, 0.1])
self._ax_ptcldist_chooser.set_title('Distribution')
self._ax_species_chooser = self._fig.add_axes([0.45, 0.4, 0.08, 0.1])
self._ax_species_chooser.set_title('Species')
self._ax_ani_playpause = self._fig.add_axes([0.45, 0.25, 0.08, 0.04])
# clicking on window: time chooser and time range chooser
self._fig.canvas.mpl_connect('button_press_event',
self._canvas_on_press)
self._fig.canvas.mpl_connect('button_release_event',
self._canvas_on_release)
# scalar chooser
self._scalar_labels = ['$\int E^2 \mathrm{d} x$', \
'$\int \, (g|f|\delta f) v^2 \mathrm{d} v \mathrm{d} x$']
self._scalar_chooser = widgets.RadioButtons(self._ax_scalar_chooser, \
self._scalar_labels, active = self._iscalar)
self._scalar_chooser.on_clicked(self._scalar_chooser_on_click)
# mode chooser
self._mode_labels = []
for i in range(self._data.nmode):
self._mode_labels.append(str(self._data.mode[i]))
self._mode_chooser = widgets.RadioButtons(self._ax_mode_chooser, \
self._mode_labels, active = self._imode)
self._mode_chooser.on_clicked(self._mode_chooser_on_click)
# particle distribution chooser
self._ptcldist_labels = ['$g$', '$f$', '$\delta f$']
self._ptcldist_chooser = widgets.RadioButtons( \
self._ax_ptcldist_chooser, self._ptcldist_labels, \
active = self._iptcldist)
self._ptcldist_chooser.on_clicked(self._ptcldist_chooser_on_click)
# species chooser
self._species_labels = []
for ispecies in range(self._data.nspecies):
self._species_labels.append(str(ispecies + 1))
self._species_labels.append('Sum')
self._species_chooser = widgets.RadioButtons( \
self._ax_species_chooser, self._species_labels, \
active = self._ispecies)
self._species_chooser.on_clicked(self._species_chooser_on_click)
# animation play/pause button
self._ani_playpause = widgets.Button(self._ax_ani_playpause,
'Play animation')
self._ani_playpause.on_clicked(self._ani_playpause_on_click)
# timer for animation
self._timer = self._fig.canvas.new_timer(interval=200)
self._timer.add_callback(self._ani_advance)
self._timer.start()
# update all plots
self.update_plot_all()
def __init__(self,
data_filter_change=None,
data_fir_n_change=None,
der_filter_change=None,
der_fir_n_change=None,
file_change=None,
refresh_button_click=None,
sh_click=None,
icg_click=None,
file_list: List[str] = None):
self.fig, self.axs = plt.subplots(3, 2, constrained_layout=True)
self.lines = numpy.ndarray(shape=(3, 2), dtype=plt.Line2D)
plt.subplots_adjust(bottom=0.25)
widgets.TextBox(plt.axes([0, 0.17, 0.12, 0.02]),
"",
initial="Data filter")
self.data_filter_widget = widgets.RadioButtons(
plt.axes([0, 0.01, 0.12, 0.15]), ["savgol", "FIR", "None"], 2)
self.data_filter_widget.on_clicked(data_filter_change)
self.data_fir_n_widget = widgets.Slider(plt.axes(
[0.4, 0.08, 0.25, 0.05]),
"Data FIR N",
5,
100,
20,
valstep=1)
self.data_fir_n_widget.on_changed(data_fir_n_change)
widgets.TextBox(plt.axes([0.12, 0.17, 0.12, 0.02]),
"",
initial="Derivative filter")
self.der_filter_widget = widgets.RadioButtons(
plt.axes([0.12, 0.01, 0.12, 0.15]), ["savgol", "FIR", "None"], 2)
self.der_filter_widget.on_clicked(der_filter_change)
self.der_fir_n_widget = widgets.Slider(plt.axes(
[0.4, 0.02, 0.25, 0.05]),
"Deriv FIR N",
5,
100,
50,
valstep=1)
self.der_fir_n_widget.on_changed(der_fir_n_change)
self.refresh_button = widgets.Button(
plt.axes([0.40, 0.15, 0.08, 0.05]), "Measure")
self.refresh_button.on_clicked(refresh_button_click)
self.sh_widget = widgets.TextBox(plt.axes([0.5, 0.15, 0.05, 0.05]), "",
"200")
self.sh_plus_btn = widgets.Button(plt.axes([0.55, 0.175, 0.02, 0.025]),
"+")
self.sh_minus_btn = widgets.Button(plt.axes([0.55, 0.15, 0.02, 0.025]),
"-")
def sh_pl_cl(_):
new_val = int(self.sh_widget.text) + 50
self.sh_widget.set_val(str(new_val))
sh_click(new_val)
def sh_mn_cl(_):
new_val = int(self.sh_widget.text) - 50
self.sh_widget.set_val(str(new_val))
sh_click(new_val)
self.sh_plus_btn.on_clicked(sh_pl_cl)
self.sh_minus_btn.on_clicked(sh_mn_cl)
self.sh_widget.on_text_change(
lambda _: sh_click(int(self.sh_widget.text)))
self.icg_widget = widgets.TextBox(plt.axes([0.6, 0.15, 0.05, 0.05]),
"", "100000")
self.icg_plus_btn = widgets.Button(
plt.axes([0.65, 0.175, 0.02, 0.025]), "+")
self.icg_minus_btn = widgets.Button(
plt.axes([0.65, 0.15, 0.02, 0.025]), "-")
self.icg_widget.on_text_change(
lambda _: icg_click(int(self.icg_widget.text)))
def icg_pl_cl(_):
new_val = int(self.icg_widget.text) + 1000
self.icg_widget.set_val(str(new_val))
sh_click(new_val)
def icg_mn_cl(_):
new_val = int(self.icg_widget.text) - 1000
self.icg_widget.set_val(str(new_val))
sh_click(new_val)
self.icg_plus_btn.on_clicked(icg_pl_cl)
self.icg_minus_btn.on_clicked(icg_mn_cl)
if file_list is not None:
self.file_list_widget = widgets.RadioButtons(
plt.axes([0.7, 0.01, 0.28, 0.15]), file_list)
self.file_list_widget.on_clicked(file_change)
#ax2 = plt.axes([0.05, 0.15, 0.9, 0.80], projection='3d')
ax_slider_1 = plt.axes([0.1, 0.01, 0.2, 0.02])
ax_slider_2 = plt.axes([0.1, 0.04, 0.2, 0.02])
ax_slider_3 = plt.axes([0.1, 0.07, 0.2, 0.02])
ax_slider_4 = plt.axes([0.1, 0.1, 0.2, 0.02])
ax_slider_5 = plt.axes([0.1, 0.13, 0.2, 0.02])
ax_slider_6 = plt.axes([0.5, 0.01, 0.2, 0.02])
ax_slider_7 = plt.axes([0.5, 0.04, 0.2, 0.02])
ax_slider_8 = plt.axes([0.5, 0.07, 0.2, 0.02])
ax_slider_9 = plt.axes([0.5, 0.1, 0.2, 0.02])
ax_slider_10 = plt.axes([0.5, 0.13, 0.2, 0.02])
rax = plt.axes([0.0, 0.8, 0.1, 0.15])
ax_slider_11 = plt.axes([0.2, 0.97, 0.1, 0.02])
ax_slider_12 = plt.axes([0.6, 0.97, 0.1, 0.02])
ax_slider_13 = plt.axes([0.8, 0.97, 0.2, 0.02])
radio = widgets.RadioButtons(rax, ('CW', 'Pulsed'))
slider_1 = widgets.Slider(ax_slider_1, 'qwp_1', 0., 360)
slider_2 = widgets.Slider(ax_slider_2, 'hwp_2', 0., 360)
slider_3 = widgets.Slider(ax_slider_3, 'qwp_2', 0., 360)
slider_4 = widgets.Slider(ax_slider_4, 'hwp_3', 0., 360)
slider_5 = widgets.Slider(ax_slider_5, 'qwp_3', 0., 360)
slider_6 = widgets.Slider(ax_slider_6, 'delay_2', -2, 2)
slider_7 = widgets.Slider(ax_slider_7, 'delay_3', -2, 2)
slider_8 = widgets.Slider(ax_slider_8, 'ampl_1', 0, 1)
slider_9 = widgets.Slider(ax_slider_9, 'ampl_2', 0, 1)
slider_10 = widgets.Slider(ax_slider_10, 'ampl_3', 0, 1)
slider_11 = widgets.Slider(ax_slider_11, 'x-size', 0, 4)
slider_12 = widgets.Slider(ax_slider_12, 'x-start', -2, 2)
slider_13 = widgets.Slider(ax_slider_13, 'close', 0, 1)
#start
axe_rayon = plt.axes([0.7, 0.92, 0.2, 0.03])
axe_infiny = plt.axes([0.025, 0.7, 0.1, 0.1])
axe_r = plt.axes([0.025, 0.5, 0.1, 0.1])
slider_teta = wdg.Slider(axe_teta,
'Ouverture',
0,
np.pi / 4,
valinit=np.pi / 6)
slider_diametre = wdg.Slider(axe_dia,
'Diamètre',
0,
np.pi / 2,
valinit=np.pi / 6)
slider_rayon = wdg.Slider(axe_rayon, "Rayon", 0.1, 15, valinit=10)
button_inf = wdg.RadioButtons(axe_infiny, ('Infinie', 'Non'))
button_type = wdg.RadioButtons(axe_r, ("Concave", "Convexe"))
def mise_a_jour(val=None):
#On enlève tous les rayon/miroirs/sources des listes pour en créer des nouveaux
for rayon in lst_ray:
lst_ray.remove(rayon)
for sourcee in lst_source:
lst_source.remove(sourcee)
for miroire in lst_miroir:
lst_miroir.remove(miroire)
fig[1].cla() #Clear de la figure
#On récupère la valeur des widgets
ouverture = slider_teta.val
def test_check_bunch_of_radio_buttons():
rax = plt.axes([0.05, 0.1, 0.15, 0.7])
widgets.RadioButtons(rax, ('B1', 'B2', 'B3', 'B4', 'B5', 'B6', 'B7', 'B8',
'B9', 'B10', 'B11', 'B12', 'B13', 'B14', 'B15'))
def interactive_ui(base_path: str):
# Load all array file
print("Loading data")
FILE_STABILITY_F = "sampo.stability_f.array"
FILE_STABILITY_E = "sampo.stability_e.array"
FILE_STABILITY_D = "sampo.stability_d.array"
FILE_PRESSURE_SELF = "sampo.pressure_self.array"
FILE_PRESSURE_ENEMY = "sampo.pressure_enemy.array"
FILE_BARRAGE_SELF = "sampo.barrage_self.array"
FILE_BARRAGE_ENEMY = "sampo.barrage_enemy.array"
FILE_PROXIMITY_SELF = "sampo.proximity_self.array"
FILE_PROXIMITY_ENEMY = "sampo.proximity_enemy.array"
FILE_PATH1_SELF = "sampo.path1_self.array"
FILE_PATH1_ENEMY = "sampo.path1_enemy.array"
stability_F = _load_field_from_file(base_path + '/' + FILE_STABILITY_F)
stability_E = _load_field_from_file(base_path + '/' + FILE_STABILITY_E)
stability_D = _load_field_from_file(base_path + '/' + FILE_STABILITY_D)
pressure_self = _load_field_from_file(base_path + '/' + FILE_PRESSURE_SELF)
pressure_enemy = _load_field_from_file(base_path + '/' + FILE_PRESSURE_ENEMY)
barrage_self = _load_field_from_file(base_path + '/' + FILE_BARRAGE_SELF)
barrage_enemy = _load_field_from_file(base_path + '/' + FILE_BARRAGE_ENEMY)
proximity_self = _load_field_from_file(base_path + '/' + FILE_PROXIMITY_SELF)
proximity_enemy = _load_field_from_file(base_path + '/' + FILE_PROXIMITY_ENEMY)
path1_self = _load_paths_from_file(base_path + '/' + FILE_PATH1_SELF)
path1_enemy = _load_paths_from_file(base_path + '/' + FILE_PATH1_ENEMY)
nTurns = len(stability_F)
print("Turns: {}".format(nTurns))
fig = pyplot.figure(figsize=(12,6))
fig.subplots_adjust(hspace=0.05)
nRows = 1
nCols = 2
heat_axis = fig.add_subplot(nRows, nCols, 1)
grid = numpy.zeros((transform.ARENA_SIZE, transform.ARENA_SIZE))
heat_im = heat_axis.imshow(grid.T,
origin='lower', aspect='equal')
path_axis = fig.add_subplot(nRows, nCols, 2)
path_im = path_axis.imshow(grid.T,
origin='lower', aspect='equal')
def update_heat(a):
#print("update_heat Called")
grid = numpy.zeros((transform.ARENA_SIZE, transform.ARENA_SIZE))
v_min = 0
v_max = 1
for p in range(transform.ARENA_VOL):
x,y = transform.pos2_decode(p)
grid[x][y] = a[p]
v = a[p]
if v == float('-inf') or v == float('inf'):
v = -1
if v < v_min: v_min = v
if v > v_max: v_max = v
heat_im.set_clim(vmin=v_min, vmax=v_max)
heat_im.set_data(grid.T)
#heat_im.set_clim()
#print("Min: {}, Max: {}".format(v_min,v_max))
update_heat(stability_F[0])
def update_path(path, ty):
grid = -numpy.ones((transform.ARENA_SIZE, transform.ARENA_SIZE))
v_min = -1
v_max = 1
# Note: Enemy hazard is not computed.
if path and not (ty == 2 and 'Enemy'== player_radio.value_selected):
n = len(path)
for i in range(n):
x = path.px[i]
y = path.py[i]
if ty == 0:
grid[x][y] = path.damage_dp[i]
elif ty == 1:
grid[x][y] = path.shield_dp[i]
else:
grid[x][y] = path.hazard_dp[i]
v = grid[x][y]
if v < v_min: v_min = v
if v > v_max: v_max = v
path_im.set_clim(vmin=v_min, vmax=v_max)
path_im.set_data(grid.T)
fig.subplots_adjust(left=0.3,bottom=0.5,right=1.0)
path_axis_bbox = path_axis.get_position()
feasibility_plot_axis = fig.add_axes(
[path_axis_bbox.xmin,0.3,path_axis_bbox.width,0.05])
feasibility_plot_axis.set_autoscale_on(True)
feasibility_plot_axis.get_xaxis().set_visible(False)
feasibility_plot_axis.get_yaxis().set_visible(False)
feasibility_plot, = feasibility_plot_axis.plot( \
range(transform.ARENA_SIZE), [0] * transform.ARENA_SIZE)
player_radio_axis = fig.add_axes([0,0.85,0.25,0.15])
player_radio = widgets.RadioButtons(player_radio_axis,
('Self', 'Enemy'))
fields_radio_axis = fig.add_axes([0,0.4,0.25,0.45])
fields_radio = widgets.RadioButtons(fields_radio_axis,
('stability_F', 'stability_E', 'stability_D',
'pressure', 'barrage', 'proximity'))
path_radio_axis = fig.add_axes([0,0.2,0.25,0.2])
path_radio = widgets.RadioButtons(path_radio_axis,
('Damage', 'Shield', 'Hazard'))
turn_slider_axis = fig.add_axes([0.3,0.2,0.3,0.03])
turn_slider = DiscreteSlider(turn_slider_axis, 'Turns', 0, nTurns-1,
valinit=0, valfmt='%0.0f')
colorbar_axis = fig.add_axes([0.3,0.3,0.3,0.03])
fig.colorbar(heat_im, cax=colorbar_axis, orientation='horizontal')
abscissa_slider_axis = fig.add_axes(
[path_axis_bbox.xmin,0.2,path_axis_bbox.width,0.03])
abscissa_slider = DiscreteSlider(abscissa_slider_axis, 'Ab.',
0, transform.ARENA_SIZE - 1,
valinit=0, valfmt='%0.0f')
primal_button_axis = fig.add_axes([0.65,0.23, 0.05, 0.05])
primal_button = widgets.Button(primal_button_axis, 'Primal')
def onChange_field(val):
turn = int(turn_slider.val)
pname = player_radio.value_selected
aname = fields_radio.value_selected
#print("Event! aname: {}".format(aname))
try:
if aname == 'stability_F': update_heat(stability_F[turn])
elif aname == 'stability_E': update_heat(stability_E[turn])
elif aname == 'stability_D': update_heat(stability_D[turn])
elif aname == 'pressure':
if pname == 'Self': update_heat(pressure_self[turn])
else: update_heat(pressure_enemy[turn])
elif aname == 'barrage':
if pname == 'Self': update_heat(barrage_self[turn])
else: update_heat(barrage_enemy[turn])
elif aname == 'proximity':
if pname == 'Self': update_heat(proximity_self[turn])
else: update_heat(proximity_enemy[turn])
else: print("Unknown aname: {}".format(aname))
except Exception as e:
print(e)
fig.canvas.draw_idle()
def onChange_path(val):
turns = int(turn_slider.val)
ab = int(abscissa_slider.val)
pname = player_radio.value_selected
aname = path_radio.value_selected
try:
if aname == 'Damage':
if pname == 'Self': update_path(path1_self[turns][ab], ty=0)
else: update_path(path1_enemy[turns][ab], ty=0)
elif aname == 'Shield':
if pname == 'Self': update_path(path1_self[turns][ab], ty=1)
else: update_path(path1_enemy[turns][ab], ty=1)
elif aname == 'Hazard':
if pname == 'Self': update_path(path1_self[turns][ab], ty=2)
else: update_path(path1_enemy[turns][ab], ty=2)
else: print("Unknown aname: {}".format(aname))
except Exception as e:
print(e)
fig.canvas.draw_idle()
def onClick_primal(event):
turns = int(turn_slider.val)
pname = player_radio.value_selected
aname = path_radio.value_selected
try:
assert len(path1_self[turns]) == transform.ARENA_SIZE
max_i = 0
max_feasibility = float('-inf')
for i in range(transform.ARENA_SIZE):
if pname == 'Self':
p = path1_self[turns][i]
else:
p = path1_enemy[turns][i]
if not p:
continue
assert p.evaluated
if p.feasibility > max_feasibility:
max_i = i
max_feasibility = p.feasibility
print("Primal at: {}".format(max_i))
abscissa_slider.set_val(float(max_i))
except Exception as e:
raise
onChange_path(None)
def onChange(val):
pname = player_radio.value_selected
turns = int(turn_slider.val)
if pname == 'Self': path_array = path1_self[turns]
else: path_array = path1_enemy[turns]
feas = [(i,p.feasibility) for i,p in enumerate(path_array) if p]
feas_x, feas_y = zip(*feas)
feasibility_plot.set_data(feas_x, feas_y)
feasibility_plot_axis.relim()
feasibility_plot_axis.autoscale_view(True, True, True)
onChange_field(val)
onChange_path(val)
player_radio.on_clicked(onChange)
turn_slider.on_changed(onChange)
fields_radio.on_clicked(onChange_field)
abscissa_slider.on_changed(onChange_path)
path_radio.on_clicked(onChange_path)
primal_button.on_clicked(onClick_primal)
pyplot.show()
print('Plot closing')
def __init__(self, blocksize, samplerate):
# choosing style
plt.style.use('dark_background')
# creating figure and gridspec instance
self.fig = plt.figure(figsize=(16, 9))
self.gs = self.fig.add_gridspec(90, 160)
def on_close(event):
sys.exit()
# connecting on_close event
self.fig.canvas.mpl_connect('close_event', on_close)
# creating and formatting axes for waveform
self.ax1 = self.fig.add_subplot(self.gs[5:44, 0:63])
self.ax1.grid(True, lw=0.2)
self.x_max_span = np.round(blocksize * 1000 / samplerate, 1)
self.ax1.set_xlim(-np.round(self.x_max_span / 8, 1),
np.round(self.x_max_span / 8, 1))
self.ax1.set_xticks(
np.linspace(-np.round(self.x_max_span / 8, 1),
np.round(self.x_max_span / 8, 1),
11,
endpoint=True))
self.ax1.set_xticklabels([])
self.ax1.set_ylim(-1, 1)
self.ax1.set_yticks(np.linspace(-1, 1, 9, endpoint=True))
self.ax1.set_yticklabels([])
self.ax1.tick_params(axis='both', length=0)
# creating and formatting axes for spectrum
self.ax2 = self.fig.add_subplot(self.gs[45:84, 0:63])
self.ax2.grid(True, lw=0.2)
self.ax2.set_xlim(0, 22050)
self.ax2.set_xticks(np.linspace(0, 22050, 11, endpoint=True))
self.ax2.set_xticklabels([])
self.ax2.set_ylim(0, 0.5)
self.ax2.set_yticks(np.linspace(0, 0.5, 9, endpoint=True))
self.ax2.set_yticklabels([])
self.ax2.tick_params(axis='both', length=0)
# creating text boxes for distances between cursors
self.ax_t_1_l = self.fig.add_subplot(self.gs[0:4, 8:23])
self.ax_t_1_l.set_xticklabels([])
self.ax_t_1_l.set_yticklabels([])
self.ax_t_1_l.tick_params(axis='both', length=0)
self.t_1_l = self.ax_t_1_l.text(0.5, 0.5, '', ha='center', va='center')
self.ax_t_1_r = self.fig.add_subplot(self.gs[0:4, 40:55])
self.ax_t_1_r.set_xticklabels([])
self.ax_t_1_r.set_yticklabels([])
self.ax_t_1_r.tick_params(axis='both', length=0)
self.t_1_r = self.ax_t_1_r.text(0.5, 0.5, '', ha='center', va='center')
self.ax_t_2_l = self.fig.add_subplot(self.gs[85:89, 8:23])
self.ax_t_2_l.set_xticklabels([])
self.ax_t_2_l.set_yticklabels([])
self.ax_t_2_l.tick_params(axis='both', length=0)
self.t_2_l = self.ax_t_2_l.text(0.5, 0.5, '', ha='center', va='center')
self.ax_t_2_r = self.fig.add_subplot(self.gs[85:89, 40:55])
self.ax_t_2_r.set_xticklabels([])
self.ax_t_2_r.set_yticklabels([])
self.ax_t_2_r.tick_params(axis='both', length=0)
self.t_2_r = self.ax_t_2_r.text(0.5, 0.5, '', ha='center', va='center')
# creating text boxes for cell scales
self.ax_t_y_ch_1 = self.fig.add_subplot(self.gs[9:13, 90:101])
self.ax_t_y_ch_1.set_xticklabels([])
self.ax_t_y_ch_1.set_yticklabels([])
self.ax_t_y_ch_1.tick_params(axis='both', length=0)
self.t_y_ch_1 = self.ax_t_y_ch_1.text(0.5,
0.5,
'0.25',
ha='center',
va='center')
self.ax_t_y_ch_2 = self.fig.add_subplot(self.gs[9:13, 108:119])
self.ax_t_y_ch_2.set_xticklabels([])
self.ax_t_y_ch_2.set_yticklabels([])
self.ax_t_y_ch_2.tick_params(axis='both', length=0)
self.t_y_ch_2 = self.ax_t_y_ch_2.text(0.5,
0.5,
'0.25',
ha='center',
va='center')
self.ax_t_y_ch_3 = self.fig.add_subplot(self.gs[9:14, 126:138])
self.ax_t_y_ch_3.set_xticklabels([])
self.ax_t_y_ch_3.set_yticklabels([])
self.ax_t_y_ch_3.tick_params(axis='both', length=0)
self.t_y_ch_3 = self.ax_t_y_ch_3.text(0.5,
0.5,
'0.25',
ha='center',
va='center')
self.ax_t_y_ch_4 = self.fig.add_subplot(self.gs[9:13, 144:157])
self.ax_t_y_ch_4.set_xticklabels([])
self.ax_t_y_ch_4.set_yticklabels([])
self.ax_t_y_ch_4.tick_params(axis='both', length=0)
self.t_y_ch_4 = self.ax_t_y_ch_4.text(0.5,
0.5,
'0.25',
ha='center',
va='center')
self.ax_t_x = self.fig.add_subplot(self.gs[54:58, 104:115])
self.ax_t_x.set_xticklabels([])
self.ax_t_x.set_yticklabels([])
self.ax_t_x.tick_params(axis='both', length=0)
self.t_x = self.ax_t_x.text(0.5,
0.5,
str(np.round(self.x_max_span / 40, 1)) +
' ms',
ha='center',
va='center')
# creating X-scale slider
self.ax_sl_x_sc = self.fig.add_subplot(self.gs[54:57, 66:97])
self.ax_sl_x_sc.set_title('X-scale', {'fontsize': 10})
self.sl_x_sc = wdgt.Slider(self.ax_sl_x_sc,
'',
-4,
0,
-2,
valstep=0.5,
facecolor='0.95')
self.sl_x_sc.valtext.set_visible(False)
# making X-scale slider work
def scale_x(event):
xcur1pos = (
(self.xcur1.line.get_xdata()[0] - self.ax1.get_xlim()[0]) /
(self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]))
xcur2pos = (
(self.xcur2.line.get_xdata()[0] - self.ax1.get_xlim()[0]) /
(self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]))
self.ax1.set_xlim(
-np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1), 1) -
self.sl_x_sh.val,
np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1), 1) -
self.sl_x_sh.val)
self.ax1.set_xticks(
np.linspace(
-np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1), 1)
- self.sl_x_sh.val,
np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1),
1) - self.sl_x_sh.val,
11,
endpoint=True))
self.xcur1.line.set_xdata([
xcur1pos * (self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]) +
self.ax1.get_xlim()[0],
xcur1pos * (self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]) +
self.ax1.get_xlim()[0]
])
self.xcur2.line.set_xdata([
xcur2pos * (self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]) +
self.ax1.get_xlim()[0],
xcur2pos * (self.ax1.get_xlim()[1] - self.ax1.get_xlim()[0]) +
self.ax1.get_xlim()[0]
])
self.t_x.set_text(
str(np.round(self.x_max_span *
(2.0**self.sl_x_sc.val) / 10, 1)) + ' ms')
self.sl_x_sc.on_changed(scale_x)
# creating X-shift slider
self.ax_sl_x_sh = self.fig.add_subplot(self.gs[62:65, 66:97])
self.ax_sl_x_sh.set_title('X-shift', {'fontsize': 10})
self.sl_x_sh = wdgt.Slider(self.ax_sl_x_sh,
'',
-np.round(self.x_max_span / 2, 1),
np.round(self.x_max_span / 2, 1),
0.0,
facecolor='0.95')
self.sl_x_sh.valtext.set_visible(False)
# making X-shift slider work
def shift_x(event):
xcur1pos = (self.xcur1.line.get_xdata()[0] -
self.ax1.get_xlim()[0])
xcur2pos = (self.xcur2.line.get_xdata()[0] -
self.ax1.get_xlim()[0])
self.ax1.set_xlim(
-np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1), 1) -
self.sl_x_sh.val,
np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 1), 1) -
self.sl_x_sh.val)
self.ax1.set_xticks(
np.linspace(self.ax1.get_xlim()[0],
self.ax1.get_xlim()[1],
11,
endpoint=True))
self.xcur1.line.set_xdata([
xcur1pos + self.ax1.get_xlim()[0],
xcur1pos + self.ax1.get_xlim()[0]
])
self.xcur2.line.set_xdata([
xcur2pos + self.ax1.get_xlim()[0],
xcur2pos + self.ax1.get_xlim()[0]
])
self.sl_x_sh.on_changed(shift_x)
# creating on/off button for channel 1
self.ax_b_on_off_1 = self.fig.add_subplot(self.gs[47:50, 96:99])
self.b_on_off_1 = wdgt.Button(self.ax_b_on_off_1, '1', None, '#f4bb32',
'#efc35b')
self.b_on_off_1.label.set_color('0')
# making on/off button for channel 1 change color on click
def button_change_1(event):
if self.b_on_off_1.color == '#f4bb32':
self.b_on_off_1.color = '0.85'
self.line1.set_linestyle('')
self.line_fft_1.set_linestyle('')
else:
self.b_on_off_1.color = '#f4bb32'
self.line1.set_linestyle('-')
if self.b_on_off_s.color == '0.95':
self.line_fft_1.set_linestyle('-')
self.b_on_off_1.on_clicked(button_change_1)
# creating Y-scale slider for channel 1
self.ax_sl_y_sc_1 = self.fig.add_subplot(self.gs[17:40, 94:97])
self.ax_sl_y_sc_1.set_title('Y-scale', {'fontsize': 10})
self.sl_y_sc_1 = wdgt.Slider(self.ax_sl_y_sc_1,
'',
-2,
2,
0,
orientation='vertical',
valstep=0.5,
facecolor='#f4bb32')
self.sl_y_sc_1.valtext.set_visible(False)
# making Y-scale slider for channel 1 affect scale box
def scale_1(event):
self.t_y_ch_1.set_text(
str(np.round(0.25 / (2**self.sl_y_sc_1.val), 3)))
if self.data1 is not None:
self.line1.set_ydata((self.data1 * (2**self.sl_y_sc_1.val)) +
self.sl_y_sh_1.val)
self.sl_y_sc_1.on_changed(scale_1)
# creating Y-shift slider for channel 1
self.ax_sl_y_sh_1 = self.fig.add_subplot(self.gs[5:44, 102:105])
self.ax_sl_y_sh_1.set_title('Y-shift', {'fontsize': 10})
self.sl_y_sh_1 = wdgt.Slider(self.ax_sl_y_sh_1,
'',
-1.0,
1.0,
0.0,
orientation='vertical',
facecolor='#f4bb32')
self.sl_y_sh_1.valtext.set_visible(False)
# making Y-shift slider for channel 1 move trigger
# self.prev1 = 0
# def shift_1(event):
# if self.b_on_off_tr.color == '0.95' and self.r_b.value_selected == 'Channel 1':
# if self.sl_tr.val + self.sl_y_sh_1.val - self.prev1 > 1:
# self.sl_tr.set_val(1)
# elif self.sl_tr.val + self.sl_y_sh_1.val - self.prev1 < -1:
# self.sl_tr.set_val(-1)
# else:
# self.sl_tr.set_val(self.sl_tr.val + self.sl_y_sh_1.val - self.prev1)
# self.prev1 = self.sl_y_sh_1.val
# self.sl_y_sh_1.on_changed(shift_1)
# creating on/off button for channel 2
self.ax_b_on_off_2 = self.fig.add_subplot(self.gs[47:50, 114:117])
self.b_on_off_2 = wdgt.Button(self.ax_b_on_off_2, '2', None, '0.85',
'#9fd1ac')
self.b_on_off_2.label.set_color('0')
# making on/off button for channel 2 change color on click
def button_change_2(event):
if self.b_on_off_2.color == '#81b78f':
self.b_on_off_2.color = '0.85'
self.line2.set_linestyle('')
self.line_fft_2.set_linestyle('')
else:
self.b_on_off_2.color = '#81b78f'
self.line2.set_linestyle('-')
if self.b_on_off_s.color == '0.95':
self.line_fft_2.set_linestyle('-')
self.b_on_off_2.on_clicked(button_change_2)
# creating Y-scale slider for channel 2
self.ax_sl_y_sc_2 = self.fig.add_subplot(self.gs[17:40, 112:115])
self.ax_sl_y_sc_2.set_title('Y-scale', {'fontsize': 10})
self.sl_y_sc_2 = wdgt.Slider(self.ax_sl_y_sc_2,
'',
-2,
2,
0,
orientation='vertical',
valstep=0.5,
facecolor='#81b78f')
self.sl_y_sc_2.valtext.set_visible(False)
# making Y-scale slider for channel 2 affect scale box
def scale_2(event):
self.t_y_ch_2.set_text(
str(np.round(0.25 / (2**self.sl_y_sc_2.val), 3)))
if self.data2 is not None:
self.line2.set_ydata((self.data2 * (2**self.sl_y_sc_2.val)) +
self.sl_y_sh_2.val)
self.sl_y_sc_2.on_changed(scale_2)
# creating Y-shift slider for channel 2
self.ax_sl_y_sh_2 = self.fig.add_subplot(self.gs[5:44, 120:123])
self.ax_sl_y_sh_2.set_title('Y-shift', {'fontsize': 10})
self.sl_y_sh_2 = wdgt.Slider(self.ax_sl_y_sh_2,
'',
-1.0,
1.0,
0.0,
orientation='vertical',
facecolor='#81b78f')
self.sl_y_sh_2.valtext.set_visible(False)
# making Y-shift slider for channel 2 move trigger
self.prev2 = 0
def shift_2(event):
if self.b_on_off_tr.color == '0.95' and self.r_b.value_selected == 'Channel 2':
if self.sl_tr.val + self.sl_y_sh_2.val - self.prev2 > 1:
self.sl_tr.set_val(1)
elif self.sl_tr.val + self.sl_y_sh_2.val - self.prev2 < -1:
self.sl_tr.set_val(-1)
else:
self.sl_tr.set_val(self.sl_tr.val + self.sl_y_sh_2.val -
self.prev2)
self.prev2 = self.sl_y_sh_2.val
self.sl_y_sh_2.on_changed(shift_2)
# creating on/off button for channel 3
self.ax_b_on_off_3 = self.fig.add_subplot(self.gs[47:50, 132:135])
self.b_on_off_3 = wdgt.Button(self.ax_b_on_off_3, '3', None, '0.85',
'#89a8db')
self.b_on_off_3.label.set_color('0')
# making on/off button for channel 3 change color on click
def button_change_3(event):
if self.b_on_off_3.color == '#6590d8':
self.b_on_off_3.color = '0.85'
self.line3.set_linestyle('')
self.line_fft_3.set_linestyle('')
else:
self.b_on_off_3.color = '#6590d8'
self.line3.set_linestyle('-')
if self.b_on_off_s.color == '0.95':
self.line_fft_3.set_linestyle('-')
self.b_on_off_3.on_clicked(button_change_3)
# creating Y-scale slider for channel 3
self.ax_sl_y_sc_3 = self.fig.add_subplot(self.gs[17:40, 130:133])
self.ax_sl_y_sc_3.set_title('Y-scale', {'fontsize': 10})
self.sl_y_sc_3 = wdgt.Slider(self.ax_sl_y_sc_3,
'',
-2,
2,
0,
orientation='vertical',
valstep=0.5,
facecolor='#6590d8')
self.sl_y_sc_3.valtext.set_visible(False)
# making Y-scale slider for channel 3 affect scale box
def scale_3(event):
self.t_y_ch_3.set_text(
str(np.round(0.25 / (2**self.sl_y_sc_3.val), 3)))
if self.data3 is not None:
self.line3.set_ydata((self.data3 * (2**self.sl_y_sc_3.val)) +
self.sl_y_sh_3.val)
self.sl_y_sc_3.on_changed(scale_3)
# creating Y-shift slider for channel 3
self.ax_sl_y_sh_3 = self.fig.add_subplot(self.gs[5:44, 138:141])
self.ax_sl_y_sh_3.set_title('Y-shift', {'fontsize': 10})
self.sl_y_sh_3 = wdgt.Slider(self.ax_sl_y_sh_3,
'',
-1.0,
1.0,
0.0,
orientation='vertical',
facecolor='#6590d8')
self.sl_y_sh_3.valtext.set_visible(False)
# making Y-shift slider for channel 3 move trigger
self.prev3 = 0
def shift_3(event):
if self.b_on_off_tr.color == '0.95' and self.r_b.value_selected == 'Channel 3':
if self.sl_tr.val + self.sl_y_sh_3.val - self.prev3 > 3:
self.sl_tr.set_val(1)
elif self.sl_tr.val + self.sl_y_sh_3.val - self.prev3 < -1:
self.sl_tr.set_val(-1)
else:
self.sl_tr.set_val(self.sl_tr.val + self.sl_y_sh_3.val -
self.prev3)
self.prev3 = self.sl_y_sh_3.val
self.sl_y_sh_3.on_changed(shift_3)
# creating on/off button for channel 4
self.ax_b_on_off_4 = self.fig.add_subplot(self.gs[47:50, 150:153])
self.b_on_off_4 = wdgt.Button(self.ax_b_on_off_4, '4', None, '0.85',
'#f5b8d8')
self.b_on_off_4.label.set_color('0')
# making on/off button for channel 4 change color on click
def button_change_4(event):
if self.b_on_off_4.color == '#de8fb9':
self.b_on_off_4.color = '0.85'
self.line4.set_linestyle('')
self.line_fft_4.set_linestyle('')
else:
self.b_on_off_4.color = '#de8fb9'
self.line4.set_linestyle('-')
if self.b_on_off_s.color == '0.95':
self.line_fft_4.set_linestyle('-')
self.b_on_off_4.on_clicked(button_change_4)
# creating Y-scale slider for channel 4
self.ax_sl_y_sc_4 = self.fig.add_subplot(self.gs[17:40, 148:151])
self.ax_sl_y_sc_4.set_title('Y-scale', {'fontsize': 10})
self.sl_y_sc_4 = wdgt.Slider(self.ax_sl_y_sc_4,
'',
-2,
2,
0,
orientation='vertical',
valstep=0.5,
facecolor='#de8fb9')
self.sl_y_sc_4.valtext.set_visible(False)
# making Y-scale slider for channel 4 affect scale box
def scale_4(event):
self.t_y_ch_4.set_text(
str(np.round(0.25 / (2**self.sl_y_sc_4.val), 3)))
if self.data4 is not None:
self.line4.set_ydata((self.data4 * (2**self.sl_y_sc_4.val)) +
self.sl_y_sh_4.val)
self.sl_y_sc_4.on_changed(scale_4)
# creating Y-shift slider for channel 4
self.ax_sl_y_sh_4 = self.fig.add_subplot(self.gs[5:44, 156:159])
self.ax_sl_y_sh_4.set_title('Y-shift', {'fontsize': 10})
self.sl_y_sh_4 = wdgt.Slider(self.ax_sl_y_sh_4,
'',
-1.0,
1.0,
0.0,
orientation='vertical',
facecolor='#de8fb9')
self.sl_y_sh_4.valtext.set_visible(False)
# making Y-shift slider for channel 4 move trigger
self.prev4 = 0
def shift_4(event):
if self.b_on_off_tr.color == '0.95' and self.r_b.value_selected == 'Channel 4':
if self.sl_tr.val + self.sl_y_sh_4.val - self.prev4 > 1:
self.sl_tr.set_val(1)
elif self.sl_tr.val + self.sl_y_sh_4.val - self.prev4 < -1:
self.sl_tr.set_val(-1)
else:
self.sl_tr.set_val(self.sl_tr.val + self.sl_y_sh_4.val -
self.prev4)
self.prev4 = self.sl_y_sh_4.val
self.sl_y_sh_4.on_changed(shift_4)
# creating on/off button spectrum
self.ax_b_on_off_s = self.fig.add_subplot(self.gs[70:74, 66:77])
self.b_on_off_s = wdgt.Button(self.ax_b_on_off_s, 'Spectrum', None,
'0.85', 'w')
self.b_on_off_s.label.set_color('0')
# making on/off button for spectrum change color on click
def button_change_s(event):
if self.b_on_off_s.color == '0.95':
self.b_on_off_s.color = '0.85'
self.line_fft_1.set_linestyle('')
self.line_fft_2.set_linestyle('')
else:
self.b_on_off_s.color = '0.95'
if self.b_on_off_1.color == '#f4bb32':
self.line_fft_1.set_linestyle('-')
if self.b_on_off_2.color == '#81b78f':
self.line_fft_2.set_linestyle('-')
self.b_on_off_s.on_clicked(button_change_s)
# creating lin/log button for spectrum
# self.ax_b_lin_log = self.fig.add_subplot(self.gs[70:74, 82:93])
# self.b_lin_log = wdgt.Button(self.ax_b_lin_log, 'Lin/Log', None, '0.85', 'w')
# self.b_lin_log.label.set_color('0')
# self.flag2 = False
# making lin/log button for spectrum work
# def lin_log_switch(event):
# if self.flag2:
# self.flag2 = False
# self.ax2.set_ylim(0, 0.2)
# self.ax2.set_yticks(np.linspace(0, 0.2, 9, endpoint=True))
# self.ax2.set_yscale('linear')
# self.ax2.set_yticklabels([])
# else:
# self.flag2 = True
# self.ax2.set_ylim(0, 1)
# self.ax2.set_yticks(np.linspace(0, 1, 9, endpoint=True))
# self.ax2.set_yscale('log')
# # self.ax2.set_yticklabels([])
# self.ax2.tick_params(axis='y', length=0)
# print(self.ax2.get_yticks())
# print(self.ax2.get_ylim())
# self.b_lin_log.on_clicked(lin_log_switch)
# creating range slider for spectrum
self.ax_r_sl = self.fig.add_subplot(self.gs[79:82, 66:97])
self.ax_r_sl.set_title('Frequency range, Hz', fontsize=10)
self.r_sl = wdgt.RangeSlider(self.ax_r_sl,
'',
0.0,
22050.0,
facecolor='0.95')
self.r_sl.set_val([0.0, 22050.0])
# making range slider for spectrum work
def change_size(event):
xfftcur1pos = (
(self.xfftcur1.line.get_xdata()[0] - self.ax2.get_xlim()[0]) /
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]))
xfftcur2pos = (
(self.xfftcur2.line.get_xdata()[0] - self.ax2.get_xlim()[0]) /
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]))
self.ax2.set_xlim(self.r_sl.val[0], self.r_sl.val[1])
self.ax2.set_xticks(
np.linspace(self.r_sl.val[0],
self.r_sl.val[1],
11,
endpoint=True))
self.xfftcur1.line.set_xdata([
xfftcur1pos *
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) +
self.ax2.get_xlim()[0], xfftcur1pos *
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) +
self.ax2.get_xlim()[0]
])
self.xfftcur2.line.set_xdata([
xfftcur2pos *
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) +
self.ax2.get_xlim()[0], xfftcur2pos *
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) +
self.ax2.get_xlim()[0]
])
self.r_sl.on_changed(change_size)
# creating on/off button for waveform cursors
self.ax_b_on_off_cur = self.fig.add_subplot(self.gs[54:58, 125:136])
self.b_on_off_cur = wdgt.Button(self.ax_b_on_off_cur,
'Waveform \ncursors', None, '0.85',
'0.95')
self.b_on_off_cur.label.set_color('0')
# making on/off button for waveform cursors change color on click
def button_change_cur(event):
if self.b_on_off_cur.color == '#4cd147':
self.b_on_off_cur.color = '0.85'
self.b_on_off_cur.hovercolor = '0.95'
self.xcur1.line.set_linestyle('')
self.xcur2.line.set_linestyle('')
self.ycur1.line.set_linestyle('')
self.ycur2.line.set_linestyle('')
else:
self.b_on_off_cur.color = '#4cd147'
self.b_on_off_cur.hovercolor = '#2fff27'
self.xcur1.line.set_linestyle('--')
self.xcur2.line.set_linestyle('--')
self.ycur1.line.set_linestyle('--')
self.ycur2.line.set_linestyle('--')
self.b_on_off_cur.on_clicked(button_change_cur)
# creating on/off button for spectrum cursors
self.ax_b_on_off_fft_cur = self.fig.add_subplot(self.gs[63:67,
125:136])
self.b_on_off_fft_cur = wdgt.Button(self.ax_b_on_off_fft_cur,
'Spectrum \ncursors', None, '0.85',
'0.95')
self.b_on_off_fft_cur.label.set_color('0')
# making on/off button for cursors change color on click
def button_change_fft_cur(event):
if self.b_on_off_fft_cur.color == '#4cd147':
self.b_on_off_fft_cur.color = '0.85'
self.b_on_off_fft_cur.hovercolor = '0.95'
self.xfftcur1.line.set_linestyle('')
self.xfftcur2.line.set_linestyle('')
self.yfftcur1.line.set_linestyle('')
self.yfftcur2.line.set_linestyle('')
else:
self.b_on_off_fft_cur.color = '#4cd147'
self.b_on_off_fft_cur.hovercolor = '#2fff27'
self.xfftcur1.line.set_linestyle('--')
self.xfftcur2.line.set_linestyle('--')
self.yfftcur1.line.set_linestyle('--')
self.yfftcur2.line.set_linestyle('--')
self.b_on_off_fft_cur.on_clicked(button_change_fft_cur)
# creating reset button
self.ax_b_reset = self.fig.add_subplot(self.gs[72:76, 133:144])
self.b_reset = wdgt.Button(self.ax_b_reset, 'Reset', None, '#f96b6b',
'#fa9494')
# making reset button reset all sliders' and cursors' positions
def reset(event):
self.sl_x_sc.reset()
self.sl_x_sh.reset()
self.sl_y_sc_1.reset()
self.sl_y_sh_1.reset()
self.sl_y_sc_2.reset()
self.sl_y_sh_2.reset()
self.sl_y_sc_3.reset()
self.sl_y_sh_3.reset()
self.sl_y_sc_4.reset()
self.sl_y_sh_4.reset()
self.sl_tr.reset()
self.r_sl.set_val([0.0, 22050.0])
self.r_b.set_active(0)
self.xcur1.line.set_xdata([
-np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 2), 1),
-np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 2), 1)
])
self.xcur2.line.set_xdata([
np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 2), 1),
np.round(self.x_max_span * 2.0**(self.sl_x_sc.val - 2), 1)
])
self.ycur1.line.set_ydata([-0.5, -0.5])
self.ycur2.line.set_ydata([0.5, 0.5])
xfftcur1pos = self.ax2.get_xlim()[0] + (self.ax2.get_xlim()[1] -
self.ax2.get_xlim()[0]) / 4
xfftcur2pos = self.ax2.get_xlim()[1] - (self.ax2.get_xlim()[1] -
self.ax2.get_xlim()[0]) / 4
yfftcur1pos = self.ax2.get_ylim()[0] + (self.ax2.get_ylim()[1] -
self.ax2.get_ylim()[0]) / 4
yfftcur2pos = self.ax2.get_ylim()[1] - (self.ax2.get_ylim()[1] -
self.ax2.get_ylim()[0]) / 4
self.xfftcur1.line.set_xdata([xfftcur1pos, xfftcur1pos])
self.xfftcur2.line.set_xdata([xfftcur2pos, xfftcur2pos])
self.yfftcur1.line.set_ydata([yfftcur1pos, yfftcur1pos])
self.yfftcur2.line.set_ydata([yfftcur2pos, yfftcur2pos])
self.b_reset.on_clicked(reset)
# creating single frame button
self.ax_b_single = self.fig.add_subplot(self.gs[54:58, 141:152])
self.b_single = wdgt.Button(self.ax_b_single, 'Single', None, '0.85',
'w')
self.b_single.label.set_color('0')
self.flag1 = False
# making single frame button work
def single(event):
if self.b_run_stop.color == '#4cd147':
self.b_run_stop.color = '0.85'
self.b_run_stop.hovercolor = '0.95'
else:
self.b_run_stop.color = '#4cd147'
self.b_run_stop.hovercolor = '#2fff27'
self.flag1 = True
self.b_single.on_clicked(single)
# creating run/stop button
self.ax_b_run_stop = self.fig.add_subplot(self.gs[63:67, 141:152])
self.b_run_stop = wdgt.Button(self.ax_b_run_stop, 'Run/Stop', None,
'0.85', 'w')
self.b_run_stop.label.set_color('0')
# making run/stop button work
def run_stop(event):
if self.b_run_stop.color == '#4cd147':
self.b_run_stop.color = '0.85'
self.b_run_stop.hovercolor = '0.95'
else:
self.b_run_stop.color = '#4cd147'
self.b_run_stop.hovercolor = '#2fff27'
self.b_run_stop.on_clicked(run_stop)
# creating trigger on/off button
self.ax_b_on_off_tr = self.fig.add_subplot(self.gs[47:51, 66:77])
self.b_on_off_tr = wdgt.Button(self.ax_b_on_off_tr, 'Trigger', None,
'0.85', 'w')
self.b_on_off_tr.label.set_color('0')
# making trigger on/off button work
def trigger_on_off(event):
if self.b_on_off_tr.color == '0.95':
self.b_on_off_tr.color = '0.85'
self.trigger.set_linestyle('')
else:
self.b_on_off_tr.color = '0.95'
self.trigger.set_linestyle('-')
self.b_on_off_tr.on_clicked(trigger_on_off)
# creating trigger position slider
self.ax_sl_tr = self.fig.add_subplot(self.gs[5:44, 66:69])
self.ax_sl_tr.set_title('Trigger \nposition', fontsize=10)
self.sl_tr = wdgt.Slider(self.ax_sl_tr,
'',
-1,
1,
0,
orientation='vertical',
facecolor='0.95')
self.sl_tr.valtext.set_visible(False)
# making trigger position slider work
def trigger_move(event):
self.trigger.set_ydata([self.sl_tr.val, self.sl_tr.val])
self.sl_tr.on_changed(trigger_move)
# creating radio buttons for channel selection
self.ax_r_b = self.fig.add_subplot(self.gs[17:40, 72:89])
self.ax_r_b.set_title('Channel \nselection', fontsize=10)
self.r_b = wdgt.RadioButtons(
self.ax_r_b, ('Channel 1', 'Channel 2', 'Channel 3', 'Channel 4'),
0, '#4cd147')
# creating starter plots for all channels
self.line1, = self.ax1.plot(
np.linspace(-np.round(self.x_max_span / 2, 1),
np.round(self.x_max_span / 2, 1), blocksize),
np.zeros(blocksize), '#f4bb32')
self.line2, = self.ax1.plot(
np.linspace(-np.round(self.x_max_span / 2, 1),
np.round(self.x_max_span / 2, 1), blocksize),
np.zeros(blocksize), '#81b78f')
self.line3, = self.ax1.plot(
np.linspace(-np.round(self.x_max_span / 2, 1),
np.round(self.x_max_span / 2, 1), blocksize),
np.zeros(blocksize), '#6590d8')
self.line4, = self.ax1.plot(
np.linspace(-np.round(self.x_max_span / 2, 1),
np.round(self.x_max_span / 2, 1), blocksize),
np.zeros(blocksize), '#de8fb9')
self.line2.set_linestyle('')
self.line3.set_linestyle('')
self.line4.set_linestyle('')
self.line_fft_1, = self.ax2.plot(np.linspace(0, 22050, blocksize),
np.zeros(blocksize), '#f4bb32')
self.line_fft_2, = self.ax2.plot(np.linspace(0, 22050, blocksize),
np.zeros(blocksize), '#81b78f')
self.line_fft_3, = self.ax2.plot(np.linspace(0, 22050, blocksize),
np.zeros(blocksize), '#6590d8')
self.line_fft_4, = self.ax2.plot(np.linspace(0, 22050, blocksize),
np.zeros(blocksize), '#de8fb9')
self.line_fft_1.set_linestyle('')
self.line_fft_2.set_linestyle('')
self.line_fft_3.set_linestyle('')
self.line_fft_4.set_linestyle('')
self.trigger = self.ax1.axhline(0, c='0.95', ls='', lw=0.5)
self.xcur1 = Cc.Cursor(
self.ax1.axvline(-self.x_max_span / 16, c='r', ls='',
pickradius=2), self.b_on_off_cur)
self.xcur2 = Cc.Cursor(
self.ax1.axvline(self.x_max_span / 16, c='r', ls='', pickradius=2),
self.b_on_off_cur)
self.ycur1 = Cc.Cursor(
self.ax1.axhline(-0.5, c='r', ls='', pickradius=2),
self.b_on_off_cur)
self.ycur2 = Cc.Cursor(
self.ax1.axhline(0.5, c='r', ls='', pickradius=2),
self.b_on_off_cur)
self.xfftcur1 = Cc.Cursor(
self.ax2.axvline(
self.ax2.get_xlim()[0] +
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) / 4,
c='r',
ls='',
pickradius=2), self.b_on_off_fft_cur)
self.xfftcur2 = Cc.Cursor(
self.ax2.axvline(
self.ax2.get_xlim()[1] -
(self.ax2.get_xlim()[1] - self.ax2.get_xlim()[0]) / 4,
c='r',
ls='',
pickradius=2), self.b_on_off_fft_cur)
self.yfftcur1 = Cc.Cursor(
self.ax2.axhline(
self.ax2.get_ylim()[0] +
(self.ax2.get_ylim()[1] - self.ax2.get_ylim()[0]) / 4,
c='r',
ls='',
pickradius=2), self.b_on_off_fft_cur)
self.yfftcur2 = Cc.Cursor(
self.ax2.axhline(
self.ax2.get_ylim()[1] -
(self.ax2.get_ylim()[1] - self.ax2.get_ylim()[0]) / 4,
c='r',
ls='',
pickradius=2), self.b_on_off_fft_cur)
self.data1 = None
self.data2 = None
self.data3 = None
self.data4 = None
# creating blitting manager
self.bm = BMc.BlitManager(self.fig.canvas, [
self.line1, self.line2, self.line3, self.line4, self.line_fft_1,
self.line_fft_2, self.line_fft_3, self.line_fft_4, self.trigger,
self.xcur1.line, self.xcur2.line, self.ycur1.line, self.ycur2.line,
self.xfftcur1.line, self.xfftcur2.line, self.yfftcur1.line,
self.yfftcur2.line, self.t_1_l, self.t_1_r, self.t_2_l, self.t_2_r
])
# making plot visible
plt.show(block=False)
plt.pause(.1)
def __init__(self,
inst,
controls=True,
xlim=None,
ylim=None,
zlim=None,
focus=None,
style='dark_background',
**kwargs):
plt.style.use(style)
self.inst = inst
self.controls = controls
self._populate_offset_dict()
self.fig = plt.figure(**kwargs)
self.ax_zx = self.fig.add_subplot(2, 2, 1)
self.ax_zy = self.fig.add_subplot(2, 2, 2)
self.ax_xy = self.fig.add_subplot(2, 2, 3)
self.ax_or = self.fig.add_subplot(2, 2, 4, projection='3d')
self._draw_labels()
self.offset = [0, 0, 0]
if self.controls:
plt.subplots_adjust(left=0.05, right=0.7)
rectprops = dict(facecolor='blue', alpha=0.5)
self.xlim_span_ax = plt.axes([0.72, 0.3, 0.25, 0.03])
self.xlim_span_ax.set_yticks([])
self.xlim_span = wid.SpanSelector(self.xlim_span_ax,
self._inst_xlim_change,
'horizontal',
rectprops=rectprops)
xlim_span_label = self._create_text("xlim",
[0.72, 0.25, 0.25, 0.03])
self.ylim_span_ax = plt.axes([0.72, 0.2, 0.25, 0.03])
self.ylim_span_ax.set_yticks([])
self.ylim_span = wid.SpanSelector(self.ylim_span_ax,
self._inst_ylim_change,
'horizontal',
rectprops=rectprops)
ylim_span_label = self._create_text("ylim",
[0.72, 0.15, 0.25, 0.03])
self.zlim_span_ax = plt.axes([0.72, 0.1, 0.25, 0.03])
self.zlim_span_ax.set_yticks([])
self.zlim_span = wid.SpanSelector(self.zlim_span_ax,
self._inst_zlim_change,
'horizontal',
rectprops=rectprops)
zlim_span_label = self._create_text("zlim",
[0.72, 0.05, 0.25, 0.03])
self.comp_focus_textbox_ax = plt.axes([0.72, 0.35, 0.25, 0.63],
facecolor='grey')
self.comp_focus_buttons = wid.RadioButtons(
self.comp_focus_textbox_ax,
tuple(kr.comp_name for kr in self.inst.kernel_refs))
self.comp_focus_buttons.on_clicked(self._inst_comp_focus)
#self.comp_focus_textbox = wid.TextBox(self.comp_focus_textbox_ax, "", color='.1', hovercolor='.15')
#self.comp_focus_textbox.on_text_change(self._inst_comp_focus)
#comp_focus_label = self._create_text("Focussed component", [0.72, 0.45, 0.25, 0.03]
if focus:
self._inst_comp_focus(focus)
if xlim:
self._inst_xlim_change(xlim[0], xlim[1])
if ylim:
self._inst_ylim_change(ylim[0], ylim[1])
if zlim:
self._inst_zlim_change(zlim[0], zlim[1])
targetNameList.append('No pillar')
fig = plt.figure(figsize=(6, 3))
fig.canvas.set_window_title('Data Labelling Software (Mirsaidov Lab)')
fig.canvas.mpl_connect('key_press_event', press)
axImage = fig.add_axes([0.05, 0.1, 0.4, 0.8])
axRadio = fig.add_axes([0.55, 0.3, 0.40, 0.6])
axSubmitButton = fig.add_axes([0.55, 0.1, 0.1, 0.1])
axSkipButton = fig.add_axes([0.7, 0.1, 0.1, 0.1])
axExitButton = fig.add_axes([0.85, 0.1, 0.1, 0.1])
axImage.imshow(gImgStack[:, :, 0], cmap='Greys_r')
if (method == 'useClassificationResult'):
axImage.set_title(targetNameList[0])
axImage.set_xlabel('Frame %d/%d' % (counter + 1, numFrames))
elif (method == 'makeNewDataset'):
axImage.set_title("C = %d, NC = %d, NP = %d" %
(collapseCounter, notcollapseCounter, nopillarCounter))
axImage.set_xticks([]), axImage.set_yticks([])
radio = widgets.RadioButtons(axRadio,
('Collapse', 'Not collapse', 'No pillar'))
submit = widgets.Button(axSubmitButton, 'Submit')
skip = widgets.Button(axSkipButton, 'Skip')
exitSoftware = widgets.Button(axExitButton, 'Exit')
plt.show()
submit.on_clicked(updateLabel)
skip.on_clicked(loadNewImage)
exitSoftware.on_clicked(quitProgram)
############################################################
def kwarg_to_mpl_widget(
fig,
heights,
widget_y,
key,
val,
update,
slider_format_string,
play_button=False,
play_button_pos="right",
):
"""
heights : tuple
with slider_height, radio_height, gap_height
returns
-------
init_val
widget
cb
the callback id
new_y
The widget_y to use for the next pass
"""
slider_height, radio_height, gap_height = heights
# widget_y = 0.05
slider_ax = []
sliders = []
radio_ax = []
radio_buttons = []
cbs = []
if isinstance(val, set):
if len(val) == 1:
val = val.pop()
if isinstance(val, tuple):
pass
else:
return val, None, None, widget_y
else:
val = list(val)
n = len(val)
longest_len = max(list(map(lambda x: len(list(x)), map(str, val))))
# should probably use something based on fontsize rather that .015
width = max(0.15, 0.015 * longest_len)
radio_ax = fig.add_axes(
[0.2, 0.9 - widget_y - radio_height * n, width, radio_height * n])
widget_y += radio_height * n + gap_height
radio_buttons = mwidgets.RadioButtons(radio_ax, val, active=0)
cb = radio_buttons.on_clicked(
partial(changeify_radio, labels=val, update=update))
return val[0], radio_buttons, cb, widget_y
elif isinstance(val, mwidgets.AxesWidget):
val, widget, cb = process_mpl_widget(val, update)
return val, widget, cb, widget_y
else:
slider = None
update_fxn = None
if isinstance(val, tuple) and val[0] in ["r", "range", "rang", "rage"]:
if isinstance(val[1], (np.ndarray, list)):
vals = val[1]
else:
vals = np.linspace(*val[1:])
slider_ax = fig.add_axes(
[0.2, 0.9 - widget_y - gap_height, 0.65, slider_height])
slider = create_mpl_range_selection_slider(slider_ax, key, vals,
slider_format_string)
cb = slider.on_changed(
partial(changeify, update=partial(update, values=vals)))
widget_y += slider_height + gap_height
return vals[[0, -1]], slider, cb, widget_y
if isinstance(val, tuple):
if len(val) == 2:
min_ = float(val[0])
max_ = float(val[1])
slider_ax = fig.add_axes(
[0.2, 0.9 - widget_y - gap_height, 0.65, slider_height])
slider = mwidgets.Slider(slider_ax, key, min_, max_)
def update_text(val):
slider.valtext.set_text(slider_format_string.format(val))
# make sure the initial value also gets formatted
update_text(slider.valinit)
slider.on_changed(update_text)
cb = slider.on_changed(
partial(changeify, update=partial(update, values=None)))
widget_y += slider_height + gap_height
return min_, slider, cb, widget_y
elif len(val) == 3:
# should warn that that doesn't make sense with matplotlib sliders
min_ = val[0]
max_ = val[1]
val = np.linspace(*val)
val = np.atleast_1d(val)
if val.ndim > 1:
raise ValueError(
f"{key} is {val.ndim}D but can only be 1D or a scalar")
if len(val) == 1:
# don't need to create a slider
return val[0], None, None, widget_y
else:
slider_ax = fig.add_axes(
[0.2, 0.9 - widget_y - gap_height, 0.65, slider_height])
slider = create_mpl_selection_slider(slider_ax, key, val,
slider_format_string)
slider.on_changed(
partial(changeify, update=partial(update, values=val)))
widget_y += slider_height + gap_height
return val[0], slider, None, widget_y
def __init__(self):
self.fig = plt.figure(figsize=(18, 9))
self.ax1 = plt.axes([0.05, 0.8, 0.9, 0.15])
self.ax2 = plt.axes([0.05, 0.5, 0.9, 0.25])
self.axpow = plt.axes([0.125, 0.28, 0.05, 0.1])
self.powerHandle = widgets.RadioButtons(self.axpow, ('On', 'Off'))
self.axshape = plt.axes([0.2, 0.28, 0.08, 0.12])
self.shapeHandle = widgets.RadioButtons(self.axshape,
('Sine', 'Sawtooth', 'Square'))
self.axpoint = plt.axes([0.1, 0.07, 0.8, 0.05])
self.pointHandle = widgets.Slider(self.axpoint,
'Number of points',
10,
2000,
valstep=1,
valinit=300)
self.N = int(self.pointHandle.val)
self.axfreq = plt.axes([0.1, 0.19, 0.8, 0.05])
self.freqHandle = widgets.Slider(self.axfreq,
'Frequency (Hz)',
0.5,
100,
valinit=30)
self.f = self.freqHandle.val
self.axtime = plt.axes([0.1, 0.13, 0.8, 0.05])
self.timeHandle = widgets.Slider(self.axtime,
'Time (s)',
1,
10,
valinit=1)
self.t = self.timeHandle.val
self.time = np.linspace(0, self.t, self.N)
self.axphase = plt.axes([0.1, 0.01, 0.8, 0.05])
self.phaseHandle = widgets.Slider(self.axphase,
'Phase',
0,
2 * np.pi,
valinit=0)
self.p_shift = self.phaseHandle.val
self.axnoise = plt.axes([0.4, 0.36, 0.15, 0.05])
self.noiseHandle = widgets.Slider(self.axnoise,
'Noise',
0,
1,
valinit=0)
self.deviation = self.noiseHandle.val
self.noise = np.random.normal(0, self.deviation, self.N)
self.axleft = plt.axes([0.4, 0.28, 0.15, 0.05])
self.leftHandle = widgets.Slider(self.axleft,
'Left cut',
0,
1,
valinit=0)
self.t0 = self.leftHandle.val
self.axright = plt.axes([0.65, 0.28, 0.15, 0.05])
self.rightHandle = widgets.Slider(self.axright,
'Right cut',
0,
1,
valinit=self.t)
self.t1 = self.rightHandle.val
self.shape = "Sine"
self.status = "On"
self.max = 0
self.max_pos = 0
self.leftcut = self.ax1.plot([self.t0, self.t0], [-1, 1], 'r--')
self.rightcut = self.ax1.plot([self.t1, self.t1], [-1, 1], 'r--')
self.sigsin = np.sin(2 * np.pi * self.f * self.time + self.p_shift)
self.sigsaw = signal.sawtooth(2 * np.pi * self.f * self.time +
self.p_shift)
self.sigsq = signal.square(2 * np.pi * self.f * self.time +
self.p_shift)
self.sig = self.sigsin
self.Fourier = fft(self.sig)
self.f_array = np.linspace(1 / self.t,
int(self.N // 2) / self.t, int(self.N // 2))
self.pow_spec = self.Fourier * np.conj(self.Fourier) / self.N
self.max = np.where(self.pow_spec == np.amax(self.pow_spec))
self.max_pos = self.max[0]
self.f_max = self.f_array[self.max_pos[0]]
self.f_diff = self.f_max - self.f
self.f_array_correct = self.f_array - self.f_diff
self.ax1.set_xlim([0, self.t])
self.ax2.set_xlim(0, 2 * self.f_array_correct[int(self.max_pos[0])])
self.sigplot = self.ax1.plot(self.time, self.sig)
self.fplot = self.ax2.plot(self.f_array_correct,
self.pow_spec[0:int(self.N // 2)])
