def extract(self,derived_key):
# Initialize state
self.tj_count = 0
self.tj_count_valid = 0
tjs = []
# Get the numerals from the key
nums = encoding.encode_key(derived_key,self.nbits)
# Initiate chaotic map
if self.improve:
ch_two = random.Random(derived_key)
else:
ch_two = chaos.Chaotic(self.mu_two,nums)
# Open input file
#
# NB: Only works for valid PDF files
self.l.info("Input file: \"" + self.input + "\"")
driver.uncompress(self.input,self.input+".qdf")
embedding_file = open(self.input+".qdf",encoding="iso-8859-1")
# Determine start position
if 0:#self.improve:#TODO: fix
# Parse file
for line in embedding_file:
# Parse line for TJ blocks
m = re.search(r'\[(.*)\][ ]?TJ',line)
if m != None:
tjs += self.get_tjs(m.group(1))
start = int(tjs.__len__() * ch_two.random())
embedding_file.seek(0,0)
tjs = []
else:
start = 0
# Parse file
self.l.info("Extracting data, please wait...")
self.print_conf_extract(start,nums)
for line in embedding_file:
# Parse line for TJ blocks
# -> Look for a TJ block, starting at current position
m = re.search(r'\[(.*)\][ ]?TJ',line)
if m != None:
# A TJ block is found
# -> Try to extract data from TJ block
tjs += self.extract_line(line,ch_two)
# Close file and clean up
embedding_file.close()
driver.delete(self.input+".qdf")
# Extract data from TJ ops
normalrange = 1
# NB: Hack for custom range (do not shift by 1)
# TODO: do that better and include in docs
if self.customrange:
normalrange = 0
# Normalize values
#
# TODO: check if really necessary
tjs = list(map(lambda x: (x - normalrange) % (2**self.nbits), tjs))
# Wrap values around in order
# to move easily inside
#
# TODO: use modulo calculation instead
tjs_ = tjs + tjs
# Start extracting after CheckStr
#
# NB: CheckStr is 20 numerals long
k = start + 20
# Go through the list of numerals
c = 0
while c < tjs.__len__():
# Look for end position FlagStr
# at current position
#
# NB: FlagStr is 20 numerals long
if nums == tjs_[k:k+20]:
# End position is found, register it
end = k + 20 - 1
self.l.debug("End position found",end)
# NB: length = end - start + 1
# Extract CheckStr
checkstr = tjs_[start:start + 20]
# Extract data
embedded = tjs_[start + 20:k]
# Break the loop
c = tjs.__len__()
# FlagStr not found
# -> Look further
c += 1
k += 1
# Check is FlagStr was found
#
# TODO: check that
if c != tjs.__len__() + 1:
# FlagStr not found
# -> Fail
self.l.error("Ending code FlagStr not found")
return -1
# FlagStr was found
# -> Decode embedded data
self.l.info("Done extracting.")
self.l.info("Decoding data, please wait...")
# Go through the list of numerals
# containing the data
k = 0
bin_str = ""
while k < embedded.__len__():
# Decode the next numeral into a binary string
bin = encoding.num_to_binstr(embedded[k],self.nbits)
# Check if it was the last numeral
if k == embedded.__len__() - 1:
# Processing the last numeral
# -> Only take the bits needed
bin_str += bin[bin.__len__() - self.nbits:]
else:
# Not processing the last numeral
# -> Take all bits
bin_str += bin
# -> Keep decoding
k += 1
# Decode the full binary string into bytes
emb_chars = encoding.decode(bin_str)
emb_str = b""
for ch in emb_chars:
emb_str += ch
self.debug_extract_print_sum(encoding.encode_key(emb_str,self.nbits),bin_str,checkstr,embedded,emb_str)
# Check integrity
if encoding.digest_to_nums(emb_str, self.nbits) != checkstr:
# Data coes not match embedded checksum
# -> Fail
self.l.error("CheckStr does not match embedded data")
return -1
# Data matches checksum
self.l.info("Done decoding.")
# -> Produce output file
output_file = open(self.output,"wb")
output_file.write(emb_str)
output_file.close()
# All finished
self.l.info("Output file: \"" + self.output + "\"")
return 0
def extract(self, derived_key):
# Initialize state
self.tj_count = 0
self.tj_count_valid = 0
tjs = []
# Get the numerals from the key
nums = encoding.encode_key(derived_key, self.nbits)
# Initiate chaotic map
if self.improve:
ch_two = random.Random(derived_key)
else:
ch_two = chaos.Chaotic(self.mu_two, nums)
# Open input file
#
# NB: Only works for valid PDF files
self.l.info("Input file: \"" + self.input + "\"")
driver.uncompress(self.input, self.input + ".qdf")
embedding_file = open(self.input + ".qdf", encoding="iso-8859-1")
# Determine start position
if 0: #self.improve:#TODO: fix
# Parse file
for line in embedding_file:
# Parse line for TJ blocks
m = re.search(r'\[(.*)\][ ]?TJ', line)
if m != None:
tjs += self.get_tjs(m.group(1))
start = int(tjs.__len__() * ch_two.random())
embedding_file.seek(0, 0)
tjs = []
else:
start = 0
# Parse file
self.l.info("Extracting data, please wait...")
self.print_conf_extract(start, nums)
for line in embedding_file:
# Parse line for TJ blocks
# -> Look for a TJ block, starting at current position
m = re.search(r'\[(.*)\][ ]?TJ', line)
if m != None:
# A TJ block is found
# -> Try to extract data from TJ block
tjs += self.extract_line(line, ch_two)
# Close file and clean up
embedding_file.close()
driver.delete(self.input + ".qdf")
# Extract data from TJ ops
normalrange = 1
# NB: Hack for custom range (do not shift by 1)
# TODO: do that better and include in docs
if self.customrange:
normalrange = 0
# Normalize values
#
# TODO: check if really necessary
tjs = list(map(lambda x: (x - normalrange) % (2**self.nbits), tjs))
# Wrap values around in order
# to move easily inside
#
# TODO: use modulo calculation instead
tjs_ = tjs + tjs
# Start extracting after CheckStr
#
# NB: CheckStr is 20 numerals long
k = start + 20
# Go through the list of numerals
c = 0
while c < tjs.__len__():
# Look for end position FlagStr
# at current position
#
# NB: FlagStr is 20 numerals long
if nums == tjs_[k:k + 20]:
# End position is found, register it
end = k + 20 - 1
self.l.debug("End position found", end)
# NB: length = end - start + 1
# Extract CheckStr
checkstr = tjs_[start:start + 20]
# Extract data
embedded = tjs_[start + 20:k]
# Break the loop
c = tjs.__len__()
# FlagStr not found
# -> Look further
c += 1
k += 1
# Check is FlagStr was found
#
# TODO: check that
if c != tjs.__len__() + 1:
# FlagStr not found
# -> Fail
self.l.error("Ending code FlagStr not found")
return -1
# FlagStr was found
# -> Decode embedded data
self.l.info("Done extracting.")
self.l.info("Decoding data, please wait...")
# Go through the list of numerals
# containing the data
k = 0
bin_str = ""
while k < embedded.__len__():
# Decode the next numeral into a binary string
bin = encoding.num_to_binstr(embedded[k], self.nbits)
# Check if it was the last numeral
if k == embedded.__len__() - 1:
# Processing the last numeral
# -> Only take the bits needed
bin_str += bin[bin.__len__() - self.nbits:]
else:
# Not processing the last numeral
# -> Take all bits
bin_str += bin
# -> Keep decoding
k += 1
# Decode the full binary string into bytes
emb_chars = encoding.decode(bin_str)
emb_str = b""
for ch in emb_chars:
emb_str += ch
self.debug_extract_print_sum(encoding.encode_key(emb_str, self.nbits),
bin_str, checkstr, embedded, emb_str)
# Check integrity
if encoding.digest_to_nums(emb_str, self.nbits) != checkstr:
# Data coes not match embedded checksum
# -> Fail
self.l.error("CheckStr does not match embedded data")
return -1
# Data matches checksum
self.l.info("Done decoding.")
# -> Produce output file
output_file = open(self.output, "wb")
output_file.write(emb_str)
output_file.close()
# All finished
self.l.info("Output file: \"" + self.output + "\"")
return 0
def embed(self,data,passkey,norandom=False):
# Initialize state
self.norandom = norandom
if self.customrange:
if norandom:
self.l.warn("Custom range is enabled, so I am forcing the no-random flag")
self.norandom = True
self.tj_count = 0
self.tj_count_valid = 0
self.tjs = []
i = 0
j = 0
new_file = b""
# Get the numerals to embed from the key and the message
nums = encoding.encode_msg(data,passkey,self.nbits)
ind = nums[0] + nums[1] + nums[2]
# Initialize chaotic maps
if self.improve:
ch_one = random.Random(encoding.digest(data))
ch_two = random.Random(passkey)
else:
ch_one = chaos.Chaotic(self.mu_one,nums[2])
ch_two = chaos.Chaotic(self.mu_two,nums[2])
# Open input file
#
# NB: Only works for valid PDF files
self.l.info("Input file: \"" + self.input + "\"")
driver.uncompress(self.input,self.input+".qdf")
cover_file = open(self.input + ".qdf","rb")
cover_file.seek(0,0)
# Determine start position
if 0:#self.improve: #TODO: fix
start = int(self.tjs.__len__() * ch_two.random())
self.l.debug("Random start position",start)
else:
start = 0
# Parse file
self.l.info("Embedding data, please wait...")
self.print_conf_embed(data,nums)
for line__ in cover_file:
line = line__.decode("latin-1")
line_ = line
# Parse line for TJ blocks
k = 0
while k < line_.__len__():
# Look for a TJ block, starting at current position
m = re.match(r'\[(.*?)\][ ]?TJ',line_[k:])
if m == None:
# No TJ blocks
# -> Look further
#
# TODO: check that
k += 1
else:
# A TJ block is found
# -> Try to embed data in TJ block
block = self.embed_line(m.group(1),ch_one,ch_two,ind,i,start,self.tjs.__len__(),j)
# Insert new block in the line
line_ = line_[:k + m.start(1)] + block[0] + line_[k + m.end(1):]
# Update state
i = block[1]
j = block[2]
# Update current position
k += m.start(1) + block[0].__len__()
# Encode new line
new_file += line_.encode("latin-1")
self.debug_embed_check_tj(cover_file)
# Close file and clean up
cover_file.close()
driver.delete(self.input+".qdf")
# Check if all data was embedded
if i < ind.__len__():
# All data was not embedded
# -> Fail
self.l.error("Not enough space available (only " + str(self.tj_count_valid) + " available, " + str(ind.__len__()) + " needed)")
return -ind.__len__()
# All data was embedded
self.l.info("Done embedding.")
# -> Produce output file
output_file = open(self.output+".raw","wb")
output_file.write(new_file)
output_file.close()
# Fix Compress Clean
driver.fcc(self.output+".raw",self.output)
self.debug_embed_print_sum()
driver.delete(self.output+".raw.fix")
# All finished
self.l.info("Output file: \"" + self.output + "\"")
return nums[1].__len__()
def embed(self, data, passkey, norandom=False):
# Initialize state
self.norandom = norandom
if self.customrange:
if norandom:
self.l.warn(
"Custom range is enabled, so I am forcing the no-random flag"
)
self.norandom = True
self.tj_count = 0
self.tj_count_valid = 0
self.tjs = []
i = 0
j = 0
new_file = b""
# Get the numerals to embed from the key and the message
nums = encoding.encode_msg(data, passkey, self.nbits)
ind = nums[0] + nums[1] + nums[2]
# Initialize chaotic maps
if self.improve:
ch_one = random.Random(encoding.digest(data))
ch_two = random.Random(passkey)
else:
ch_one = chaos.Chaotic(self.mu_one, nums[2])
ch_two = chaos.Chaotic(self.mu_two, nums[2])
# Open input file
#
# NB: Only works for valid PDF files
self.l.info("Input file: \"" + self.input + "\"")
driver.uncompress(self.input, self.input + ".qdf")
cover_file = open(self.input + ".qdf", "rb")
cover_file.seek(0, 0)
# Determine start position
if 0: #self.improve: #TODO: fix
start = int(self.tjs.__len__() * ch_two.random())
self.l.debug("Random start position", start)
else:
start = 0
# Parse file
self.l.info("Embedding data, please wait...")
self.print_conf_embed(data, nums)
for line__ in cover_file:
line = line__.decode("latin-1")
line_ = line
# Parse line for TJ blocks
k = 0
while k < line_.__len__():
# Look for a TJ block, starting at current position
m = re.match(r'\[(.*?)\][ ]?TJ', line_[k:])
if m == None:
# No TJ blocks
# -> Look further
#
# TODO: check that
k += 1
else:
# A TJ block is found
# -> Try to embed data in TJ block
block = self.embed_line(m.group(1), ch_one, ch_two, ind, i,
start, self.tjs.__len__(), j)
# Insert new block in the line
line_ = line_[:k +
m.start(1)] + block[0] + line_[k + m.end(1):]
# Update state
i = block[1]
j = block[2]
# Update current position
k += m.start(1) + block[0].__len__()
# Encode new line
new_file += line_.encode("latin-1")
self.debug_embed_check_tj(cover_file)
# Close file and clean up
cover_file.close()
driver.delete(self.input + ".qdf")
# Check if all data was embedded
if i < ind.__len__():
# All data was not embedded
# -> Fail
self.l.error("Not enough space available (only " +
str(self.tj_count_valid) + " available, " +
str(ind.__len__()) + " needed)")
return -ind.__len__()
# All data was embedded
self.l.info("Done embedding.")
# -> Produce output file
output_file = open(self.output + ".raw", "wb")
output_file.write(new_file)
output_file.close()
# Fix Compress Clean
driver.fcc(self.output + ".raw", self.output)
self.debug_embed_print_sum()
driver.delete(self.output + ".raw.fix")
# All finished
self.l.info("Output file: \"" + self.output + "\"")
return nums[1].__len__()
