def plot_index_size():
compile_command = compile_base_command + " " + cpp_ipmt_source
run(compile_command, print_output=True)
for textfile_name in textfiles_names:
textfile_path = textfiles_dir + textfile_name
textfile_idx_path = textfiles_dir + textfile_name + ".idx"
plot_values = []
plot_labels = []
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
plot_labels += [compression_algorithm + '-' + index_algorithm]
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
index_command = "./a.out index -v %s --compression=%s --indextype=%s" % (
textfile_path, compression_algorithm, index_algorithm)
run(index_command)
index_size = os.path.getsize(textfile_idx_path)
plot_values += [index_size]
PlotUtils.bar_plot(plot_values=plot_values,
plot_labels=plot_labels,
colors=colors,
ylabel="size in bytes",
title="Index size of " + textfile_name,
save_filename='plots/index-size-' + textfile_name)
def plot_index_time():
compile_command = compile_base_command + " " + cpp_ipmt_source
run(compile_command, print_output=True)
for textfile_name in textfiles_names:
textfile_path = textfiles_dir + textfile_name
plot_values = []
plot_labels = []
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
plot_labels += [compression_algorithm + '-' + index_algorithm]
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
index_command = "./a.out index -v %s --compression=%s --indextype=%s" % (
textfile_path, compression_algorithm, index_algorithm)
r = functools.partial(run, index_command, print_output=True)
run_time = get_run_time(r, runs=num_of_runs)
plot_values += [run_time]
# plot_data[textfile_name] += [gzip_compressed_size]
PlotUtils.bar_plot(plot_values=plot_values,
plot_labels=plot_labels,
colors=colors,
ylabel="time in seconds",
title="Index time of " + textfile_name,
save_filename='plots/index-time-' + textfile_name)
def plot_search_time():
compile_command = compile_base_command + " " + cpp_ipmt_source
run(compile_command, print_output=True)
for textfile_name in textfiles_names:
textfile_path = textfiles_dir + textfile_name
textfile_idx_path = textfiles_dir + textfile_name + '.idx'
plot_data = {}
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
plot_data[compression_algorithm + '-' + index_algorithm] = {}
plot_data[compression_algorithm + '-' +
index_algorithm]['x'] = pattern_sizes
plot_data[compression_algorithm + '-' +
index_algorithm]['y'] = []
plot_data['grep'] = {}
plot_data['grep']['x'] = pattern_sizes
plot_data['grep']['y'] = []
for pattern_size in pattern_sizes:
patterns_path = '%s-%d' % (textfile_path, pattern_size)
for compression_algorithm in compression_algorithms:
for index_algorithm in index_algorithms:
# index
index_command = "./a.out index -v %s --compression=%s --indextype=%s " % (
textfile_path, compression_algorithm, index_algorithm)
run(index_command, print_output=True)
# search
search_command = "./a.out search %s %s -c" % (
'pattern', textfile_idx_path)
search_command = "./a.out search -c --compression=%s --indextype=%s -p %s %s" % (
compression_algorithm, index_algorithm, patterns_path,
textfile_idx_path)
r = functools.partial(run,
search_command,
print_output=True)
run_time = get_run_time(r, runs=num_of_runs)
plot_data[compression_algorithm + '-' +
index_algorithm]['y'] += [run_time]
grep_command = 'grep pattern "%s" -o | wc -l' % (textfile_path)
# grep_command = 'grep -f "%s" "%s" -o | wc -l' % (patterns_path,
# textfile_path)
r = functools.partial(run, grep_command)
run_time = get_run_time(r, runs=num_of_runs)
plot_data['grep']['y'] += [run_time]
PlotUtils.line_plot(plots=plot_data,
xlabel='Pattern sizes',
ylabel='Time in seconds',
title='Search time ' + textfile_name,
save_filename='plots/search-time-' + textfile_name)
def evaluate(self, test_data, test_labels, batch_size=64, verbose=0):
predictions_raw = self.model.predict(test_data,
batch_size=batch_size,
verbose=verbose)
predictions_labels_indexes = np.argmax(predictions_raw, axis=1)
test_labels_indexes = np.argmax(test_labels, axis=1)
confusion_matrix = sklearn_cm(test_labels_indexes,
predictions_labels_indexes)
PlotUtils.plot_confusion_matrix(confusion_matrix, class_names=LABELS)
return MathUtils.calculate_loss(
test_labels, predictions_raw), MathUtils.calculate_accuracy(
test_labels, predictions_raw), predictions_raw
def plot_trainingdata(self):
count = self.trainingdata_count()
fig, ax = PlotUtils.prepare_figure(len(count))
ax.bar(range(0, len(count)), count, width=0.7)
ax.bar(range(0, len(count)), count, width=0.7)
plt.ylabel(_("Number of training data"))
return fig
def plot_decompression_time():
compile_command = compile_base_command + " " + cpp_compression_source
run(compile_command, print_output=True)
for textfile_name in textfiles_names:
textfile_path = textfiles_dir + textfile_name
textfile_zip_path = textfile_path + ".myzip"
plot_values = []
plot_labels = []
for algorithm in compression_algorithms:
plot_labels += [algorithm]
plot_labels += ['gzip']
for algorithm in compression_algorithms:
compression_command = run_base_command + ' %s %s compress' % (
algorithm, textfile_path)
decompression_command = run_base_command + ' %s %s decompress' % (
algorithm, textfile_zip_path)
run(compression_command, print_output=True)
r = functools.partial(run,
decompression_command,
print_output=True)
run_time = get_run_time(r, runs=num_of_runs)
plot_values += [run_time]
textfile_gzip_path = textfile_path + ".gz"
gzip_compress_command = "gzip -k -f " + textfile_path
gzip_decompress_command = "gzip -k -f -d " + textfile_gzip_path
run(gzip_compress_command)
r = functools.partial(run, gzip_decompress_command, print_output=True)
run_time = get_run_time(r, runs=num_of_runs)
plot_values += [run_time]
print(plot_values)
PlotUtils.bar_plot(plot_values=plot_values,
plot_labels=plot_labels,
colors=colors,
ylabel="time in seconds",
title="Decompression time of " + textfile_name,
save_filename='plots/decompress-time-' +
textfile_name)
def __init__(self, settings, function): # TODO add settings parameter
super(self.__class__, self).__init__()
# read in settings
num_dims = settings['number_of_dimensions']
population_size = settings['population_size']
bounds = settings['bounds']
if settings['velocity_type'] == 'constriction':
phi = max(settings['cp'] + settings['cg'], 4.0)
self.k = 2.0 / abs(2.0 - phi - sqrt(phi * phi - 4.0 * phi))
else:
self.k = 1
# check to make sure num_dims and number of bounds provided match
if len(bounds) != num_dims:
raise ValueError(
"Number of dimensions doesn't match number of bounds provided")
# set instance variables
self.settings = settings
self.function = function
# initialize population
self.population = PSO.__gen_population(bounds, population_size,
function)
self.total_population = population_size
self.best_x = PSO.__get_best_particle(self.population)
self.num_iterations = 1
if settings['plot']:
try:
self.plotutils = PlotUtils(num_dims, bounds, function)
self.__plot_state()
except ValueError:
print("Can not plot more than 2 dimensions")
settings['plot'] = False
if settings['print_iterations']:
self.__display_state()
if settings['step_through']:
oa_utils.pause()
def plot_compression_size():
compile_command = '%s %s' % (compile_base_command, cpp_compression_source)
run(compile_command, print_output=True)
for textfile_name in textfiles_names:
textfile_path = textfiles_dir + textfile_name
textfile_zip_path = textfile_path + ".myzip"
plot_values = []
plot_labels = []
for algorithm in compression_algorithms:
plot_labels += [algorithm]
plot_labels += ['gzip']
for algorithm in compression_algorithms:
run_command = run_base_command + ' %s %s compress' % (
algorithm, textfile_path)
if os.path.exists(textfile_zip_path):
os.remove(textfile_zip_path)
run(run_command, print_output=True)
compressed_size = os.path.getsize(textfile_zip_path)
plot_values += [compressed_size]
gzip_command = "gzip -k -f " + textfile_path
run(gzip_command)
textfile_gzip_path = textfile_path + ".gz"
gzip_size = os.path.getsize(textfile_gzip_path)
plot_values += [gzip_size]
print(plot_values)
PlotUtils.bar_plot(plot_values,
plot_labels=plot_labels,
colors=colors,
ylabel="size in bytes",
title="Compression size of " + textfile_name,
save_filename='plots/compress-size-' +
textfile_name)
def __init__(self, settings, function): # TODO add settings parameter
super(self.__class__, self).__init__()
# read in settings
num_dims = settings['number_of_dimensions']
population_size = settings['population_size']
bounds = settings['bounds']
# check to make sure num_dims and number of bounds provided match
if len(bounds) != num_dims:
raise ValueError("Number of dimensions doesn't match number of bounds provided")
# set instance variables
self.settings = settings
self.function = function
# initialize population
self.population = GA.__gen_population(bounds, population_size, function)
self.total_organisms = len(self.population)
self.best_x = self.population[0]
self.num_generations = 1
# stopping criteria variables
self.func_val_improvement = 0
self.num_iter_since_improvement = 0
if settings['plot']:
try:
self.plotutils = PlotUtils(num_dims, bounds, function)
self.__plot_state()
except ValueError:
print("Can not plot more than 2 dimensions")
settings['plot'] = False
if settings['print_iterations']:
self.__display_state()
if settings['step_through']:
oa_utils.pause()
def plot_y_stats(self):
norm = self.y.norm()
stdev = self.y.stdev_s()
upper = [norm[i] + stdev[i] for i in range(0, len(stdev))]
lower = [norm[i] - stdev[i] for i in range(0, len(stdev))]
fig, ax = PlotUtils.prepare_figure(len(stdev))
[
ax.plot(self.y.data_by_year(year).values,
label='individual years',
color='blue',
alpha=.2)
for year in range(self.y.timeseries.index[0].year,
self.y.timeseries.index[-1].year + 1)
]
ax.plot(upper, color='black')
ax.plot(lower, color='black', label="+/- STDEV")
ax.plot(norm, label="NORM", color='red')
handles, labels = ax.get_legend_handles_labels()
ax.legend(handles[-3:], labels[-3:])
plt.ylabel(self.y.label)
return fig
def write_html(self,
username,
organization,
site_code,
site_name,
forecast_model_name,
forecast_method,
forecast_model_params,
forecast_method_params,
filename=None,
htmlpage=None,
language='en'):
activate(language)
if self.y.mode == 'p':
frequency = 'fiveday'
elif self.y.mode == 'd':
frequency = 'decade'
elif self.y.mode == 'm':
frequency = 'monthly'
page = self.load_template_file()
scatter_plot = PlotUtils.plot_ts_comparison(
self.y_adj.timeseries,
self.forecast.timeseries,
frequency,
language=language,
)
scaled_error_title = _('Scaled Error [RMSE/STDEV]')
scaled_error_plot = PlotUtils.plot_rel_error(self.rel_error,
frequency,
title=scaled_error_title)
scaled_error_table = self.rel_error_table(frequency)
p_plot_title = _('P% Plot')
p_plot_plot = PlotUtils.plot_p(self.p, frequency, title=p_plot_title)
p_plot_table = self.p_plot_table(frequency)
quality_assessment_table = self.summary_table(frequency)
report_data = {
'SITE_INFO':
_('Station: {code} - {name}').format(code=to_str(site_code),
name=to_str(site_name)),
'USERNAME':
username,
'ORGANIZATION':
organization,
'TITLE':
_('Forecast Model Training Report'),
'REPORT_DATE':
format_date(format='long', locale=language),
'PLOTS_HEADER':
_('{frequency} Forecast Model Quality Assessment').format(
frequency=frequency.capitalize()),
'SCATTER_PLOT_LABEL':
_('Scatter Plot: Observed versus Predicted values'),
'SCALED_ERROR_LABEL':
scaled_error_title,
'P_PLOT_LABEL':
p_plot_title,
'QUALITY_ASSESSMENT_LABEL':
_('Quality Assessment'),
'SCATTER_PLOT_IMAGE':
scatter_plot,
'SCALED_ERROR_PLOT_IMAGE':
scaled_error_plot,
'SCALED_ERROR_TABLE':
scaled_error_table,
'P_PLOT_IMAGE':
p_plot_plot,
'P_PLOT_TABLE':
p_plot_table,
'QUALITY_ASSESSMENT_TABLE':
quality_assessment_table,
'FORECAST_MODEL_INFO':
_('Forecast model info:'),
'FORECAST_MODEL_NAME':
_('Name: ') + forecast_model_name,
'FORECAST_METHOD':
_('Method: ') + forecast_method,
'FORECAST_MODEL_PARAMS':
_('Model parameters: ') + str(forecast_model_params),
'FORECAST_METHOD_PARAMS':
_('Method parameters: ') + str(forecast_method_params),
}
report_data.update(self.get_spacers(frequency, language))
self.encode_utf8(report_data)
if filename:
htmlpage = open(filename, 'w')
htmlpage.write(page.safe_substitute(**report_data))
htmlpage.close()
return filename
elif htmlpage:
htmlpage.write(page.safe_substitute(**report_data))
return htmlpage
class GA(Timer, object):
"""A genetic algorithm class that contains methods for handling
the population over generations/iterations
Attributes:
There are not attributes for this class. All settings/attributes
are read in from ga_settings.py which should be located in the same
directory as this file
NOTE: The GA methods assume the population array is sorted
"""
def __init__(self, settings, function): # TODO add settings parameter
super(self.__class__, self).__init__()
# read in settings
num_dims = settings['number_of_dimensions']
population_size = settings['population_size']
bounds = settings['bounds']
# check to make sure num_dims and number of bounds provided match
if len(bounds) != num_dims:
raise ValueError("Number of dimensions doesn't match number of bounds provided")
# set instance variables
self.settings = settings
self.function = function
# initialize population
self.population = GA.__gen_population(bounds, population_size, function)
self.total_organisms = len(self.population)
self.best_x = self.population[0]
self.num_generations = 1
# stopping criteria variables
self.func_val_improvement = 0
self.num_iter_since_improvement = 0
if settings['plot']:
try:
self.plotutils = PlotUtils(num_dims, bounds, function)
self.__plot_state()
except ValueError:
print("Can not plot more than 2 dimensions")
settings['plot'] = False
if settings['print_iterations']:
self.__display_state()
if settings['step_through']:
oa_utils.pause()
# def __del__(self):
# del(self.plotutils)
#
@staticmethod
def __gen_organism(id, bounds, function):
# use gen_random_numbers to get a list of positions within the bounds
return Organism(id, oa_utils.gen_random_numbers(bounds), function)
@staticmethod
def __gen_population(bounds, size, function):
b = bounds
f = function
# generate a list of organisms
p = [GA.__gen_organism(i+1, b, f) for i in range(0, size)]
return GA.__sort_population(p)
@staticmethod
def __sort_population(p):
return sorted(p, key=lambda o: o.fitness)
###########################
### GA steps and loop ###
###########################
'''
Three possible ways of doing this.
1. have a setting that says we kill of last 20% of array or population
2. the further you are down the array the higher your probability of dieing
3. kill off the worst based on their distance from the best
TODO write a test for this. simple 10 population w/ .5 cutoff test will do
'''
@staticmethod
def __selection(population, cutoff, print_action=False):
size = len(population)
max_f = population[0].fitness
min_f = population[size-1].fitness
# denominator in probability of surviving
den = (max_f - min_f)
# if den == 0:
# print("Every organism has same objective function value.")
for (i, organism) in enumerate(population):
f = organism.fitness
# check for division by zero
if den == 0:
normalized_f = 0
else: # get normalized value
normalized_f = float(f - min_f) / den
if normalized_f > cutoff:
# delete the organism from the population
del population[i]
if print_action:
print("Selection: Deleting organism %s" % str(organism))
return population
@staticmethod
def __get_parent_index(cdf_value, arr):
norm_sum = 0
for i, o in enumerate(arr):
norm_sum += o['probability']
if norm_sum >= cdf_value:
return i
return -1
@staticmethod
def __mate_parents(id, parent1, parent2, function):
n = len(parent1.pos)
# randomly choose split position
split = random.randint(0, n-1)
# split parent positions
pos1 = parent1.pos[0:split] + parent2.pos[split:]
pos2 = parent2.pos[0:split] + parent1.pos[split:]
# get id numbers
id1 = id + 1
id2 = id + 2
# return the two newly created organisms
return (Organism(id1, pos1, function), Organism(id2, pos2, function))
"""
population: population
size: size that the population should be after crossover
NOTE: population must be sorted. crossover will return an unsorted
array of the new population.
"""
@staticmethod
def __crossover(id, population, size, function, print_action=False):
new_population = []
length = len(population)
max_f = population[length-1].fitness
min_f = population[0].fitness
den = max_f - min_f
# if size is odd
if size % 2 == 1:
raise ValueError("Populations with an odd size hasn't been implemented. Talk to Jesse")
# get inversed normalized values of fitness
# normalized value of 1 is the best. 0 is the worst
probabilities = []
normalized_sum = 0.0
for o in population:
if den == 0:
normalized_f = 1
else:
normalized_f = (max_f - o.fitness)/den
normalized_sum += normalized_f
probabilities.append({'normalized_f': normalized_f})
# calculate weight of each normalized value
for i, p in enumerate(probabilities):
probabilities[i]['probability'] = probabilities[i]['normalized_f']/normalized_sum
# generate new population
while len(new_population) < size:
# get cdf input values
cdf1 = random.random()
cdf2 = random.random()
# get index of parent from output of cdf
i = GA.__get_parent_index(cdf1, probabilities)
j = GA.__get_parent_index(cdf2, probabilities)
# mate parents
child1, child2 = GA.__mate_parents(id, population[i], population[j], function)
id += 2
# append children to new_population
new_population.extend((child1, child2))
if print_action:
for organism in new_population:
print("Crossover: New oganism %s" % str(organism))
return new_population
@staticmethod
def __mutation(population, bounds, rate, max_mutation_amount, print_action=False):
for organism in population:
if random.random() < rate:
new_pos = []
# for each dimension
for i in range(0, len(bounds)):
# take some percentage of the max mutation amount
x = random.uniform(0.01, 1.00)
delta_pos = (-1.0*log(1-x))*max_mutation_amount
# should we go positive or negative
if random.randint(0,1) == 1: delta_pos = -1.0*delta_pos
new_dim_pos = organism.pos[i] + delta_pos
# cap where we can go if we are beyond the bounds of the design space
if new_dim_pos < bounds[i][0]:
new_dim_pos = bounds[i][0]
elif new_dim_pos > bounds[i][1]:
new_dim_pos = bounds[i][1]
new_pos.append(new_dim_pos)
if print_action:
new_pos_str = "["
for x in new_pos:
new_pos_str += "%6.3f " % x
new_pos_str += "]"
print("Mutation: Moving organism %s to %s" % \
(str(organism), new_pos_str))
organism.pos = new_pos
organism.fitness = organism.get_fval()
return population
def __display_state(self):
print("The best organism in generation %d is %s" \
% (self.num_generations, str(self.get_best_x())))
def __plot_state(self):
pts = [(organism.pos[0], organism.pos[1]) for organism in self.population]
self.plotutils.plot(pts)
def __str__(self):
return "Iteration %d Best Fitness: %8.4f by organism %s" % \
(self.num_generations, self.get_best_f(), str(self.get_best_x()))
####################################
# These are the only methods that #
# should be called outside of this #
# class #
####################################
def get_best_x(self):
return self.best_x
def get_best_f(self):
return self.best_x.fitness
def do_loop(self):
population = self.population
population = GA.__selection(population, \
self.settings['selection_cutoff'], \
self.settings['print_actions'])
population = GA.__crossover(self.total_organisms, \
population, \
self.settings['population_size'], \
self.function, \
self.settings['print_actions'])
self.total_organisms += len(population)
population = GA.__mutation(population, \
self.settings['bounds'], \
self.settings['mutation_rate'], \
self.settings['max_mutation_amount'], \
self.settings['print_actions'])
self.population = GA.__sort_population(population)
self.num_generations += 1
if self.population[0].fitness < self.best_x.fitness:
# add on the improvement in function value
self.func_val_improvement += (self.best_x.fitness - self.population[0].fitness)
self.best_x = self.population[0]
if self.settings['plot']:
self.__plot_state()
if self.settings['print_iterations']:
self.__display_state()
if self.settings['step_through']:
oa_utils.pause()
def run(self):
# iterate over generations
while self.settings['num_iterations'] > self.num_generations:
self.do_loop()
# check if we've improved our function value
if self.func_val_improvement > self.settings['stopping_criteria']:
self.func_val_improvement = 0
self.num_iter_since_improvement = 0
else:
self.num_iter_since_improvement += 1
# check if we haven't improved at all in num of stopping criteria steps
if self.num_iter_since_improvement > self.settings['num_iter_stop_criteria']:
if self.settings['print_actions'] or self.settings['print_iterations']:
print("Stopping criteria met after %d number of iterations" % self.num_generations)
break
# pause for a bit if setting is set
time.sleep(self.settings['time_delay'])
if self.num_generations > self.settings['num_iterations']:
if self.settings['print_actions'] or self.settings['print_iterations']:
print("Maximum number of iterations hit (%d)" % self.num_generations)
@staticmethod
def get_name():
return "Genetic Algorithm"
class PSO(Timer, object):
"""A particle swarm class that contains methods for handling
the population over iterations
Attributes:
There are not attributes for this class. All settings/attributes
are read in from pso_settings.py which should be located in the same
directory as this file
"""
def __init__(self, settings, function): # TODO add settings parameter
super(self.__class__, self).__init__()
# read in settings
num_dims = settings['number_of_dimensions']
population_size = settings['population_size']
bounds = settings['bounds']
if settings['velocity_type'] == 'constriction':
phi = max(settings['cp'] + settings['cg'], 4.0)
self.k = 2.0 / abs(2.0 - phi - sqrt(phi * phi - 4.0 * phi))
else:
self.k = 1
# check to make sure num_dims and number of bounds provided match
if len(bounds) != num_dims:
raise ValueError(
"Number of dimensions doesn't match number of bounds provided")
# set instance variables
self.settings = settings
self.function = function
# initialize population
self.population = PSO.__gen_population(bounds, population_size,
function)
self.total_population = population_size
self.best_x = PSO.__get_best_particle(self.population)
self.num_iterations = 1
if settings['plot']:
try:
self.plotutils = PlotUtils(num_dims, bounds, function)
self.__plot_state()
except ValueError:
print("Can not plot more than 2 dimensions")
settings['plot'] = False
if settings['print_iterations']:
self.__display_state()
if settings['step_through']:
oa_utils.pause()
@staticmethod
def __gen_particle(id, bounds, function):
# use gen_random_numbers to get a list of positions within the bounds
return Particle(id, oa_utils.gen_random_numbers(bounds), function)
@staticmethod
def __gen_population(bounds, size, function):
b = bounds
f = function
# generate a list of organisms
p = [PSO.__gen_particle(i + 1, b, f) for i in range(0, size)]
return p
###########################
### PSO steps and loop ###
###########################
@staticmethod
def __update_velocity(population, velocity_type, print_actions, gbest, cp,
cg, k, w):
for p in population:
if (velocity_type == 'normal'):
p.velocity = PSO.__get_velocity(1, cp, cg, gbest, p, 1)
elif (velocity_type == 'inertia'):
p.velocity = PSO.__get_velocity(k, cp, cg, gbest, p, w)
elif (velocity_type == 'constriction'):
p.velocity = PSO.__get_velocity(k, cp, cg, gbest, p, 1)
return population
@staticmethod
def __get_velocity(k, c1, c2, gbest, p, w):
velocity_array = []
for i, v in enumerate(p.velocity):
velocity_array.append(
k * (w * v + c1 * random.random() *
(p.pbest[i] - p.pos[i]) + c2 * random.random() *
(gbest[i] - p.pos[i])))
return velocity_array
@staticmethod
def __update_position(
population): # TODO put bounds on what position can be updated to
for p in population:
p.pos = list(map(add, p.pos, p.velocity))
p.fval = p.get_fval()
return population
@staticmethod
def __get_best_particle(population):
return copy.deepcopy(min(population, key=attrgetter('fval')))
def __display_state(self):
print("The best organism in generation %d is %s" \
% (self.num_generations, str(self.get_best_x())))
def __plot_state(self):
pts = [(organism.pos[0], organism.pos[1])
for organism in self.population]
self.plotutils.plot(pts)
def __str__(self):
return "Best Fitness: %8.4f by particle %s" % \
(self.get_best_f(), str(self.get_best_x()))
####################################
# These are the only methods that #
# should be called outside of this #
# class #
####################################
def get_best_x(self):
return self.best_x
def get_best_f(self):
return self.best_x.fval
def do_loop(self):
population = self.population
population = PSO.__update_velocity(population, \
self.settings['velocity_type'], \
self.settings['print_actions'], \
self.get_best_x().pos, \
self.settings['cp'], \
self.settings['cg'], \
self.k, \
self.settings['weight'])
if self.settings['cg_plus']:
self.settings['cg'] += 0.1
phi = max(self.settings['cp'] + self.settings['cg'], 4.0)
self.k = 2.0 / abs(2.0 - phi - sqrt(phi * phi - 4.0 * phi))
population = PSO.__update_position(population)
self.num_iterations += 1
self.population = population
current_best = PSO.__get_best_particle(self.population)
if current_best.get_fval() < self.best_x.get_fval():
self.best_x = current_best
if self.settings['plot']:
self.__plot_state()
if self.settings['print_iterations']:
self.__display_state()
if self.settings['step_through']:
oa_utils.pause()
def run(self):
# iterate over generations
while self.settings['num_iterations'] > self.num_iterations:
self.do_loop()
time.sleep(self.settings['time_delay'])
@staticmethod
def get_name():
return "Particle Swarm"
# then we can import PlotUtils
from plot_utils import PlotUtils
# you could import settings from a separate file like so
from settings import settings
# plot util variable. probably make this an instance
# variable in a class
plotutils = None
if settings['plot']:
try:
# Create PlotUtils instance
# 2 params. number of dimensions and an array of 2D lists with
# the bounds for each dimension. ex [(-10,10), (-10,10)]
plotutils = PlotUtils(settings['num_dims'], settings['bounds'])
except ValueError:
print("Can not plot more than 2 dimensions!")
# set this to false so that we don't try to use
# the plotutils variable later on
settings['plot'] = False
# data should be an array of 2D lists with x1 and x2 data
data = [(1, 1), (8, 4), (-4, -9)]
# open or update plot
if settings['plot']:
plotutils.plot(data)
# you can put plotutils.plot(data) in a loop and continually update
# the plot. Here I just wait for you to press enter, after which the
