def calcs(self, S, T, P):
self['gpan'] = sw.gpan(S, T, P)
self['pt'] = sw.ptmp(S, T, P)
self['psigma0'] = sw.pden(S, T, P, 0) - 1000
self['psigma1'] = sw.pden(S, T, P, 1000) - 1000
self['psigma2'] = sw.pden(S, T, P, 2000) - 1000
return self
def plotFrame(t):
fig.clf()
ax=plotAx()
cplot=[]; gplot=[]; qplot=[]; bcplot=[]
for mat1,ax1 in zip(mat,ax):
#Time
fig.suptitle(plotter.num2time(t).strftime('%Y-%b-%d %H:%M'))
fig.subplots_adjust(bottom=.15,top=.85)
it=np.interp(t,mat1['t'],np.arange(0,len(mat1['t'])))
rho1=sw.pden(mat1['salt'][:,:,int(it)]*(1.-it%1)+mat1['salt'][:,:,int(it)+1]*(it%1),
mat1['temp'][:,:,int(it)]*(1.-it%1)+mat1['temp'][:,:,int(it)+1]*(it%1),
0.0*mat1['temp'][:,:,int(it)]*(1.-it%1)+0.0*mat1['temp'][:,:,int(it)+1]*(it%1) )
salt1=mat1['salt'][:,:,int(it)]*(1.-it%1)+mat1['salt'][:,:,int(it)+1]*(it%1)
it=np.interp(t,mat0['t'],np.arange(0,len(mat0['t'])))
rho0=sw.pden(mat0['salt'][:,:,int(it)]*(1.-it%1)+mat0['salt'][:,:,int(it)+1]*(it%1),
mat0['temp'][:,:,int(it)]*(1.-it%1)+mat0['temp'][:,:,int(it)+1]*(it%1),
0.0*mat0['temp'][:,:,int(it)]*(1.-it%1)+0.0*mat0['temp'][:,:,int(it)+1]*(it%1) )
salt0=mat0['salt'][:,:,int(it)]*(1.-it%1)+mat0['salt'][:,:,int(it)+1]*(it%1)
#print([np.nanmax(rho1-rho0),np.nanmin(rho1-rho0)])
cplot1=ax1.contourf(mat1['lon'],mat1['lat'],rho1-rho0,[tick1 for tick1 in np.arange(-5.0,5.01,.25) if np.abs(tick1)>1e-8],cmap=cmap,extend='both')
bcplot1=ax1.contour(mat1['lon'],mat1['lat'],salt1,levels=[31.5],colors='k',linewidth=1)
it=np.interp(t,mat1['t'],np.arange(0,len(mat1['t'])))
u1=mat1['u'][:,:,int(it)]*(1.-it%1)+mat1['u'][:,:,int(it)+1]*(it%1)
v1=mat1['v'][:,:,int(it)]*(1.-it%1)+mat1['v'][:,:,int(it)+1]*(it%1)
it=np.interp(t,mat0['t'],np.arange(0,len(mat0['t'])))
u0=mat0['u'][:,:,int(it)]*(1.-it%1)+mat0['u'][:,:,int(it)+1]*(it%1)
v0=mat0['v'][:,:,int(it)]*(1.-it%1)+mat0['v'][:,:,int(it)+1]*(it%1)
qplot1=plotter.add_uv2d(ax1,mat1['lon'],mat1['lat'],(u1-u0)*2,(v1-v0)*2)
#print([np.nanmin(u1-u0),np.nanmax(u1-u0),np.nanmin(v1-v0),np.nanmax(v1-v0)])
tLim1=3.*int((t-2)/3)+np.array([2.,5.])
obsll=[(lon1,lat1) for (lon1,lat1,type1,t1) in zip(obs['lon'],obs['lat'],obs['type'],obs['t']) if type1==6 and tLim1[0]<=t1<=tLim1[1]]
lon1,lat1=zip(*obsll)
gplot1=ax1.plot(lon1,lat1,'.',color=(1.,.55,0.),markersize=2,fillstyle='full')
#Colorbar
fig.subplots_adjust(right=.8)
cax=fig.add_axes([.82,.15,.02,.7])
cbar=fig.colorbar(cplot1,cax=cax,orientation='vertical',spacing='proportional')
cbar.set_ticks([tick1 for tick1 in np.arange(-5.0,5.01,1.)])
cbar.formatter=ticker.FuncFormatter(lambda x,pos:'{:.1f}'.format(x))
cbar.update_ticks()
cbar.set_label(r'Density difference [$\mathrm{kg m^{-3}}$]')
cplot.append(cplot1)
gplot.append(gplot1)
qplot.append(qplot1)
bcplot.append(bcplot1)
#plt.tight_layout()
return cplot,qplot,gplot,bcplot
def potential_density(salt_PSU, temp_C, pres_db, lat, lon, pres_ref=0):
"""
Calculate density from glider measurements of salinity and temperature.
The Basestation calculates density from absolute salinity and potential
temperature. This function is a wrapper for this functionality, where
potential temperature and absolute salinity are calculated first.
Note that a reference pressure of 0 is used by default.
Parameters
----------
salt_PSU : array, dtype=float, shape=[n, ]
practical salinty
temp_C : array, dtype=float, shape=[n, ]
temperature in deg C
pres_db : array, dtype=float, shape=[n, ]
pressure in decibar
lat : array, dtype=float, shape=[n, ]
latitude in degrees north
lon : array, dtype=float, shape=[n, ]
longitude in degrees east
Returns
-------
potential_density : array, dtype=float, shape=[n, ]
Note
----
Using seawater.dens does not yield the same results as this function. We
get very close results to what the SeaGlider Basestation returns with this
function. The difference of this function with the basestation is on
average ~ 0.003 kg/m3
"""
try:
import gsw
salt_abs = gsw.SA_from_SP(salt_PSU, pres_db, lon, lat)
temp_pot = gsw.t_from_CT(salt_abs, temp_C, pres_db)
pot_dens = gsw.pot_rho_t_exact(salt_abs, temp_pot, pres_db, pres_ref)
except ImportError:
import seawater as sw
pot_dens = sw.pden(salt_PSU, temp_C, pres_db, pres_ref)
pot_dens = transfer_nc_attrs(
getframe(),
temp_C,
pot_dens,
'potential_density',
units='kg/m3',
comment='',
standard_name='potential_density',
)
return pot_dens
def plotFrame(t):
fig.clf()
ax=plotAx()
cplot=[]; gplot=[]; bcplot=[]
for model1,ax1 in zip(model,ax):
#Time
fig.suptitle(plotter.num2time(t).strftime('%Y-%b-%d %H:%M'))
fig.subplots_adjust(bottom=0.15,top=.9,right=.85)
it=np.interp(t,model1.t,np.arange(0,len(model1.t)))
salt1=model1.salt[:,:,int(it)]*(1.-it%1)+model1.salt[:,:,int(it)+1]*(it%1)
temp1=model1.temp[:,:,int(it)]*(1.-it%1)+model1.temp[:,:,int(it)+1]*(it%1)
z1=model1.z[:,:,int(it)]*(1.-it%1)+model1.z[:,:,int(it)+1]*(it%1)
rho1=sw.pden(salt1,temp1,-z1,0.0*z1 )
rho1=rho1-1e3
z2,rho2=plotter.z_interp(z1,rho1,np.array([-300.,0]))
print([np.nanmax(rho2),np.nanmin(rho2)])
cplot1=ax1.contourf(np.reshape(model1.lon[:,0],(-1,1))+np.zeros(np.shape(z2)),-z2,rho2,[tick1 for tick1 in np.arange(18.,28.01,.5)],cmap=cmap,extend='neither')
bcplot1=ax1.contour(model1.lon,-z1,salt1,levels=[31.5],colors='k',linewidths=.5,linestyles='-')
bcplot.append(bcplot1)
bcplot2=ax1.contour(model1.lon,-z1,rho1,levels=[26.5],linestyles='--',colors='k',linewidths=.5)
bcplot.append(bcplot2)
#Coast
h=-z1[:,0]; h[np.isnan(h)]=3.
h=np.concatenate(([10e3],h,[10e3]))
hlon=np.concatenate(([-135.],model1.lon[:,0],[-120.]))
p=patch.Polygon(np.column_stack((hlon,h)),facecolor=(.5,.6,.5),edgecolor=None,closed=True)
ax1.add_patch(p)
tLim1=3.*int((t-2)/3.)+np.array([2.,5.])
obsll=[(lon1,z1) for (lon1,z1,type1,t1) in zip(obs['lon'],obs['z'],obs['type'],obs['t']) if type1==6 and tLim1[0]<=t1<=tLim1[1]]
lon1,z1=zip(*obsll)
gplot1=ax1.plot([np.min(lon1),np.min(lon1),np.max(lon1),np.max(lon1)],
[np.min(z1),np.max(z1),np.max(z1),np.min(z1)],':',
color=(.5,.5,.5),linewidth=1.)
#Colorbar
cax=fig.add_axes([.855,.15,.02,.75])
cbar=fig.colorbar(cplot1,cax=cax,orientation='vertical',spacing='vertical')
cbar.set_ticks([tick1 for tick1 in np.arange(18.0,28.01,1.)])
cbar.formatter=ticker.FuncFormatter(lambda x,pos:'{:.0f}'.format(x))
cbar.update_ticks()
cbar.set_label(r'Density-$10^3$ [$\mathrm{kg m^{-3}}$]')
cplot.append(cplot1)
gplot.append(gplot1)
#plt.tight_layout()
return cplot,gplot,bcplot
def sigmatheta(s, t, p, pr=0):
"""
:math:`\\sigma_{\\theta}` is a measure of the density of ocean water
where the quantity :math:`\\sigma_{t}` is calculated using the potential
temperature (:math:`\\theta`) rather than the in situ temperature and
potential density of water mass relative to the specified reference
pressure.
Parameters
----------
s(p) : array_like
salinity [psu (PSS-78)]
t(p) : array_like
temperature [:math:`^\\circ` C (ITS-90)]
p : array_like
pressure [db]
pr : number
reference pressure [db], default = 0
Returns
-------
sgmte : array_like
density [kg m :sup:`3`]
Examples
--------
>>> # Data from UNESCO Tech. Paper in Marine Sci. No. 44, p22.
>>> from seawater.library import T90conv
>>> from oceans import sw_extras as swe
>>> s = [0, 0, 0, 0, 35, 35, 35, 35]
>>> t = T90conv([0, 0, 30, 30, 0, 0, 30, 30])
>>> p = [0, 10000, 0, 10000, 0, 10000, 0, 10000]
>>> swe.sigmatheta(s, t, p)
array([ -0.157406 , -0.20476006, -4.34886626, -3.63884068,
28.10633141, 28.15738545, 21.72863949, 22.59634627])
References
----------
.. [1] Fofonoff, P. and Millard, R.C. Jr UNESCO 1983. Algorithms for
computation of fundamental properties of seawater. UNESCO Tech. Pap. in
Mar. Sci., No. 44, 53 pp. Eqn.(31) p.39.
http://www.scor-int.org/Publications.htm
.. [2] Millero, F.J., Chen, C.T., Bradshaw, A., and Schleicher, K. A new
high pressure equation of state for seawater. Deap-Sea Research., 1980,
Vol27A, pp255-264. doi:10.1016/0198-0149(80)90016-3
"""
s, t, p, pr = list(map(np.asanyarray, (s, t, p, pr)))
return sw.pden(s, t, p, pr) - 1000.0
def sigmatheta(s, t, p, pr=0):
"""
:math:`\\sigma_{\\theta}` is a measure of the density of ocean water
where the quantity :math:`\\sigma_{t}` is calculated using the potential
temperature (:math:`\\theta`) rather than the in situ temperature and
potential density of water mass relative to the specified reference
pressure.
Parameters
----------
s(p) : array_like
salinity [psu (PSS-78)]
t(p) : array_like
temperature [:math:`^\\circ` C (ITS-90)]
p : array_like
pressure [db]
pr : number
reference pressure [db], default = 0
Returns
-------
sgmte : array_like
density [kg m :sup:`3`]
Examples
--------
>>> # Data from UNESCO Tech. Paper in Marine Sci. No. 44, p22.
>>> from seawater.library import T90conv
>>> import oceans.sw_extras.sw_extras as swe
>>> s = [0, 0, 0, 0, 35, 35, 35, 35]
>>> t = T90conv([0, 0, 30, 30, 0, 0, 30, 30])
>>> p = [0, 10000, 0, 10000, 0, 10000, 0, 10000]
>>> swe.sigmatheta(s, t, p)
array([-0.157406 , -0.20476006, -4.34886626, -3.63884068, 28.10633141,
28.15738545, 21.72863949, 22.59634627])
References
----------
Fofonoff, P. and Millard, R.C. Jr UNESCO 1983. Algorithms for
computation of fundamental properties of seawater. UNESCO Tech. Pap. in
Mar. Sci., No. 44, 53 pp. Eqn.(31) p.39.
http://www.scor-int.org/Publications.htm
Millero, F.J., Chen, C.T., Bradshaw, A., and Schleicher, K. A new
high pressure equation of state for seawater. Deap-Sea Research., 1980,
Vol27A, pp255-264. doi:10.1016/0198-0149(80)90016-3
"""
s, t, p, pr = list(map(np.asanyarray, (s, t, p, pr)))
return sw.pden(s, t, p, pr) - 1000.0
def increasing_dens(self,
temperature=False,
qtemp=[],
salinity=False,
qsalt=[],
pressure=False,
qpres=[],
min_delta=0.01,
qf_ignore=['B', 'S', '?']):
temp = self._convert_to_np_array(temperature)
salt = self._convert_to_np_array(salinity)
pres = self._convert_to_np_array(pressure)
dens = sw.pden(salt, temp, pres, 0)
dens_temp = False
qfindex = np.full((len(temp)), False)
new_qf = np.array([''] * len(temp))
for i, d in enumerate(dens):
if len(qtemp) > 0:
if qtemp[i] in qf_ignore:
qfindex[i] = True
continue
if len(qsalt) > 0:
if qsalt[i] in qf_ignore:
qfindex[i] = True
continue
if len(qpres) > 0:
if qpres[i] in qf_ignore:
qfindex[i] = True
continue
if dens_temp:
if dens_temp > d: # not increasing = bad
if (dens_temp - d) >= min_delta:
qfindex[i] = True
dens_temp = d
new_qf[qfindex] = 'B'
qfindex_numeric = np.arange(len(temp))
qfindex_numeric = qfindex_numeric[qfindex]
return qfindex, new_qf, qfindex_numeric
def getSpice(pden, temp, sal):
import seawater as sw
import numpy as np
beta = 7.7e-4 * 1000
alpha = 2.0e-4 * 1000
Sline = np.array([33.2, 33.8])
Tline = np.array([7.75, 6.6])
Sarray = np.arange(30, 35, 0.01)
m = (np.diff(Tline) / np.diff(Sline))
Tarray = m * (Sarray - Sline[0]) + Tline[0]
Pdarray = sw.pden(Sarray, Tarray, 100. + 0. * Tarray, 0.)
#plot(Pdarray)
S0 = np.interp(pden, Pdarray, Sarray)
T0 = m * (S0 - Sline[0]) + Tline[0]
dT = -(T0 - temp)
dS = -(S0 - sal)
tau = beta * (dS) + alpha * (dT)
return tau
def ctdproc(lista,
temp_name='t068C',
lathint='Latitude =',
lonhint='Longitude =',
cond_name='c0S/m',
press_name='prDM',
down_cast=True,
looped=True,
hann_f=False,
hann_block=20,
hann_times=2,
latline=[],
lonline=[]):
'''
This function do the basic proccess to all .cnv CTD data from
given list.
'''
for fname in lista:
lon, lat, data = ctdread(fname,
press_name=press_name,
down_cast=down_cast,
lathint=lathint,
lonhint=lonhint,
lonline=lonline,
latline=latline)
if looped:
data = loopedit(data)
dataname = basename(fname)[1]
if (data.shape[0] < 101) & (
data.shape[0] >
10): # se o tamanho do perfil for com menos de 101 medidas
if (data.shape[0] /
2) % 2 == 0: # caso a metade dos dados seja par
blk = (data.shape[0] / 2) + 1 # bloco = a metade +1
else:
blk = data.shape[0] / 2 # se for impar o bloco e a metade
# remove spikes dos perfis de temperatura e condutividade
data = despike(data, propname=temp_name, block=blk, wgth=2)
data = despike(data, propname=cond_name, block=blk, wgth=2)
elif data.shape[0] >= 101:
# para perfis com mais de 101 medidas, utiliza-se blocos de 101
data = despike(data, propname=temp_name, block=101, wgth=2)
data = despike(data, propname=cond_name, block=101, wgth=2)
else:
print('radial muito rasa')
# realiza média em caixa de 1 metro
data = binning(data, delta=1.)
if temp_name == 't068C':
data['t090C'] = gsw.t90_from_t68(data['t068C'])
data['sp'] = gsw.SP_from_C(data[cond_name] * 10, data['t090C'],
data.index.values)
if hann_f:
times = 0
while times < hann_times:
data = hann_filter(data, 't090C', hann_block)
data = hann_filter(data, 'sp', hann_block)
times += 1
data['pt'] = sw.ptmp(data['sp'], data['t090C'], data.index.values)
#data['ct'] = gsw.CT_from_pt(data['sa'],data['pt'])
data['psigma0'] = sw.pden(
data['sp'], data['t090C'], data.index.values, pr=0) - 1000
data['psigma1'] = sw.pden(
data['sp'], data['t090C'], data.index.values, pr=1000) - 1000
data['psigma2'] = sw.pden(
data['sp'], data['t090C'], data.index.values, pr=2000) - 1000
data['gpan'] = sw.gpan(data['sp'], data['t090C'], data.index.values)
data['lat'] = lat
data['lon'] = lon
data.to_pickle(
os.path.split(fname)[0] + '/' +
os.path.splitext(os.path.split(fname)[1])[0])
print(dataname)
## Get data from dives
data1 = func1(files1,get_dives=data1_loc[3][inds1])
data2 = func2(files2,get_dives=data2_loc[3][inds2])
## filter all data with median filters
good_inds_1 = [np.isfinite(np.array(T.astype('float32'))) & np.isfinite(np.array(S.astype('float32'))) & np.isfinite(np.array(b.astype('float32')))
for T,S,b in zip(data1[4],data1[5],data1[7])]
if inst1 == 'BB2FLSG': # Seaglider VSF data is already filtered
filtered_dep1 = [var[i] for var,i in zip(data1[6],good_inds_1)]
filtered_VSF1 = [var[i] for var,i in zip(data1[7],good_inds_1)]
else:
filtered_dep1 = [get_data.median_filter(var.astype('float32')[i]) for var,i in zip(data1[6],good_inds_1)]
filtered_VSF1 = [get_data.median_filter(var.astype('float32')[i]) for var,i in zip(data1[7],good_inds_1)]
filtered_T1 = [np.interp(fd,d.astype('float32')[i],var.astype('float32')[i]) for fd,d,var,i in zip(filtered_dep1,data1[6],data1[4],good_inds_1)]
filtered_S1 = [np.interp(fd,d.astype('float32')[i],var.astype('float32')[i]) for fd,d,var,i in zip(filtered_dep1,data1[6],data1[5],good_inds_1)]
filtered_dens1 = [sw.pden(S,T,sw.pres(z,lat=CENTRAL_LAT))
for T,S,z in zip(filtered_T1,filtered_S1,filtered_dep1)]
good_inds_2 = [np.isfinite(T.astype('float32')) & np.isfinite(S.astype('float32')) & np.isfinite(b.astype('float32'))
for T,S,b in zip(data2[4],data2[5],data2[7])]
if inst2 == 'BB2FLSG': # Seaglider VSF data is already filtered
filtered_dep2 = [var[i] for var,i in zip(data2[6],good_inds_2)]
filtered_VSF2 = [var[i] for var,i in zip(data2[7],good_inds_2)]
else:
filtered_dep2 = [get_data.median_filter(var.astype('float32')[i]) for var,i in zip(data2[6],good_inds_2)]
filtered_VSF2 = [get_data.median_filter(var.astype('float32')[i]) for var,i in zip(data2[7],good_inds_2)]
filtered_T2 = [np.interp(fd,d.astype('float32')[i],var.astype('float32')[i]) for fd,d,var,i in zip(filtered_dep2,data2[6],data2[4],good_inds_2)]
filtered_S2 = [np.interp(fd,d.astype('float32')[i],var.astype('float32')[i]) for fd,d,var,i in zip(filtered_dep2,data2[6],data2[5],good_inds_2)]
filtered_dens2 = [sw.pden(S,T,sw.pres(z,lat=CENTRAL_LAT))
for T,S,z in zip(filtered_T2,filtered_S2,filtered_dep2)]
T = Tm[np.newaxis, ...] + Ta
S = Sm[np.newaxis, ...] + Sa
# A transect at 165
ilon = 19
lon = lon[ilon]
T = T[..., ilon]
S = S[..., ilon]
D = np.empty_like(S)
for i in range(12):
D[i] = sw.pden(S[i], T[i], Pm[..., np.newaxis], pr=0) - 1000
cs = np.array([22., 22.5, 23., 23.5, 24., 24.5, 25., 25.5, 26., 26.5])
def plot_dens(month=0):
plt.contourf(lat,
Pm,
D[month],
cs,
vmin=22.,
vmax=26.5,
cmap=cmocean.cm.dense,
extend='both')
plt.contour(lat, Pm, D[month], cs, colors='k')
plt.ylim(450, 0)
if tt == 0:
bp_arr = (0 * zeta) * np.ones((NT, 1, 1))
salt = ds1['salt'][0, :, :, :].squeeze()
ptemp = ds1['temp'][0, :, :, :].squeeze() # potential temperature
z_r = zrfun.get_z(G['h'][:, :], 0 * zeta, S, only_rho=True)
z_w = zrfun.get_z(G['h'][:, :], zeta, S, only_w=True)
p = seawater.pres(-z_r, G['lat_rho'][0, 0])
temp = seawater.temp(salt, ptemp, p) # in situ temperature
# for some reason seawater.dens throws errors if we don't do this
sd = salt.data
td = temp.data
prd = p.data
sd[salt.mask] = np.nan
td[salt.mask] = np.nan
prd[salt.mask] = np.nan
prho = seawater.pden(sd, td, prd) # potential density
prho = np.ma.masked_where(salt.mask, prho)
rho = seawater.dens(
sd, td,
prd) # in-situ density from salinity, temperature, and pressure
rho = np.ma.masked_where(salt.mask, rho)
DZ = np.diff(z_w, axis=0)
bp_arr[tt, :, :] = (g * rho * DZ).sum(axis=0) # sums vertically
ds1.close()
bp_mean = np.mean(
bp_arr, axis=0) # mean pressure of given location for entire time range
bp_anom = bp_arr - bp_mean
# initialize output Dataset
ds2 = nc.Dataset(out_fn, 'w')
for var, i in zip(data1[7], good_inds_1)
]
filtered_T1 = [
np.interp(fd,
d.astype('float32')[i],
var.astype('float32')[i])
for fd, d, var, i in zip(filtered_dep1, data1[6], data1[4], good_inds_1)
]
filtered_S1 = [
np.interp(fd,
d.astype('float32')[i],
var.astype('float32')[i])
for fd, d, var, i in zip(filtered_dep1, data1[6], data1[5], good_inds_1)
]
filtered_dens1 = [
sw.pden(S, T, sw.pres(z, lat=CENTRAL_LAT))
for T, S, z in zip(filtered_T1, filtered_S1, filtered_dep1)
]
good_inds_2 = [
np.isfinite(T.astype('float32')) & np.isfinite(S.astype('float32'))
& np.isfinite(b.astype('float32'))
for T, S, b in zip(data2[4], data2[5], data2[7])
]
if inst2 == 'BB2FLSG': # Seaglider VSF data is already filtered
filtered_dep2 = [var[i] for var, i in zip(data2[6], good_inds_2)]
filtered_VSF2 = [var[i] for var, i in zip(data2[7], good_inds_2)]
else:
filtered_dep2 = [
get_data.median_filter(var.astype('float32')[i])
for var, i in zip(data2[6], good_inds_2)
def pe(avgfile,
grdfile,
gridid=None,
maskfile='/media/Armadillo/bkp/lado/MSc/work/ROMS/plot_outputs3/msk_shelf.npy',
normalize=False,
verbose=True):
"""
USAGE
-----
t, pe = pe(avgfile, grdfile, gridid=None, maskfile='/media/Armadillo/bkp/lado/MSc/work/ROMS/plot_outputs3/msk_shelf.npy', normalize=False, verbose=True):
Calculates Potential Energy (PE) change integrated within a control volume
for each time record of a ROMS *.avg or *.his file. The change is computed relative to
the initial conditions, i.e., rhop(x,y,z,t=ti) = rho(x,y,z,t=ti) - rho(x,y,z,t=t0).
[-g*(rhop^2)]
PE = Integrated in a control volume V [-----------] # [J]
[ 2*drhodz ]
If 'normalize' is set to 'True', then PE/V (mean PE density [J/m3]) is returned instead.
Reference:
----------
Cushman-Roisin (1994): Introduction to Geophysical Fluid Dynamics, page 213,
Combination of Equations 15-29 and 15-30.
"""
print("Loading outputs and grid.")
## Get outputs.
avg = Dataset(avgfile)
## Load domain mask.
if maskfile:
mask = np.load(maskfile)
if type(mask[0, 0]) == np.bool_:
pass
else:
mask = mask == 1.
## Getting mask indices.
ilon, ilat = np.where(mask)
## Get grid, time-dependent free-surface and topography.
zeta = avg.variables['zeta']
grd = pyroms.grid.get_ROMS_grid(gridid,
zeta=zeta,
hist_file=avgfile,
grid_file=grdfile)
## Get time.
t = avg.variables['ocean_time'][:]
t = t - t[0]
nt = t.size
## Get grid coordinates at RHO-points.
lonr, latr = avg.variables['lon_rho'][:], avg.variables['lat_rho'][:]
## Get grid spacings at RHO-points.
## Find cell widths.
dx = grd.hgrid.dx # Cell width in the XI-direction.
dy = grd.hgrid.dy # Cell width in the ETA-direction.
if maskfile:
dA = dx[mask] * dy[mask]
else:
dA = dx * dy
## Get temp, salt.
temp = avg.variables['temp']
salt = avg.variables['salt']
## Find cell heights (at ti=0).
zw = grd.vgrid.z_w[0, :] # Cell depths (at ti=0).
if maskfile:
dz = zw[1:, ilat, ilon] - zw[:-1, ilat, ilon] # Cell height.
else:
dz = zw[1:, :] - zw[:-1, :]
dz = 0.5 * (dz[1:, :] + dz[:-1, :]) # Cell heights at W-points.
## Get pres, g and pden (at ti=0).
p0 = -zw # Approximation, for computational efficiency.
p0 = 0.5 * (p0[1:, :] + p0[:-1, :])
if maskfile:
rho0 = pden(salt[0, :, ilat, ilon],
temp[0, :, ilat, ilon],
p0[:, ilat, ilon],
pr=0.)
else:
rho0 = pden(salt[0, :], temp[0, :], p0, pr=0.)
if maskfile:
g = grav(latr[mask])
else:
g = grav(latr)
drho0 = rho0[1:, :] - rho0[:-1, :]
rho0z = drho0 / dz # Background potential density vertical gradient.
PE = np.array([])
for ti in range(nt):
tp = ti + 1
print("Processing time record %s of %s" % (tp, nt))
if maskfile:
rhoi = pden(salt[ti, :, ilat, ilon],
temp[ti, :, ilat, ilon],
p0[:, ilat, ilon],
pr=0.)
else:
rhoi = pden(salt[ti, :], temp[ti, :], p0, pr=0.)
rhop = rhoi - rho0 # Density anomaly, i.e., rho(x,y,z,t=ti) - rho(x,y,z,t=0)
rhop = 0.5 * (rhop[1:, :] + rhop[:-1, :])
## Find cell heights.
zw = grd.vgrid.z_w[ti, :] # Cell depths (at ti=0).
if maskfile:
dz = zw[1:, ilat, ilon] - zw[:-1, ilat, ilon] # Cell height.
else:
dz = zw[1:, :] - zw[:-1, :]
## Find cell volumes.
print(dx.shape, dy.shape, dz.shape)
dV = dA * dz # [m3]
dV = 0.5 * (dV[1:, :] + dV[:-1, :])
## Gravitational Available Potential Energy density (energy/volume).
print(g.shape)
print(rhop.shape)
print(rho0z.shape)
pe = -g * (rhop**2) / (2 * rho0z) # [J/m3]
## Do volume integral to calculate Gravitational Available Potential Energy of the control volume.
Pe = np.sum(pe * dV) # [J]
if normalize:
V = dV.sum()
Pe = Pe / V
print("")
print("Total volume of the control volume is %e m3." % V)
print(
"Normalizing PE by this volume, i.e., mean PE density [J/m3].")
print("")
if verbose:
if normalize:
print("PE = %e J/m3" % Pe)
else:
print("PE = %e J" % Pe)
PE = np.append(PE, Pe)
return t, PE
def energy_diagnostics(avgfile,
grdfile,
rho0=1025.,
gridid=None,
maskfile='msk_shelf.npy',
normalize=True,
verbose=True):
"""
USAGE
-----
t, HKE, TPE = energy_diagnostics(avgfile, grdfile, rho0=1025., gridid=None, maskfile='msk_shelf.npy', normalize=True, verbose=True)
Calculates volume-integrated Horizontal Kinetic Energy (HKE) and Total Potential Energy (TPE)
within a control volume for each time record of a ROMS *.avg or *.his file.
"""
avg = Dataset(avgfile)
print("Loading outputs and grid.")
## Load domain mask.
if maskfile:
mask = np.load(maskfile)
if type(mask[0, 0]) == np.bool_:
pass
else:
mask = mask == 1.
## Getting mask indices.
ilon, ilat = np.where(mask)
## Getting velocity field.
try:
U = avg.variables['u']
V = avg.variables['v']
uvrho3 = False
except KeyError:
U = avg.variables['u_eastward']
V = avg.variables['v_northward']
uvrho3 = True
## Get temp, salt.
temp = avg.variables['temp']
salt = avg.variables['salt']
## Get grid, time-dependent free-surface and topography.
zeta = avg.variables['zeta']
grd = pyroms.grid.get_ROMS_grid(gridid,
zeta=zeta,
hist_file=avgfile,
grid_file=grdfile)
## Find cell widths at RHO-points.
dx = grd.hgrid.dx # Cell width in the XI-direction.
dy = grd.hgrid.dy # Cell width in the ETA-direction.
if maskfile:
dA = dx[mask] * dy[mask]
else:
dA = dx * dy
## Get pres, g and pden (at ti=0).
p0 = -grd.vgrid.z_r[0, :] # Approximation, for computational efficiency.
if maskfile:
g = grav(avg.variables['lat_rho'][:][mask])
else:
g = grav(avg.variables['lat_rho'][:])
## Get time.
t = avg.variables['ocean_time'][:]
t = t - t[0]
nt = t.size
KE = np.array([])
PE = np.array([])
for ti in range(nt):
tp = ti + 1
print("")
print("Processing time record %s of %s" % (tp, nt))
print("Calculating density.")
if maskfile:
rho = pden(salt[ti, :, ilat, ilon],
temp[ti, :, ilat, ilon],
p0[:, ilat, ilon],
pr=0.)
else:
rho = pden(salt[ti, :], temp[ti, :], p0, pr=0.)
print("Loading velocities.")
uu = U[ti, :]
vv = V[ti, :]
if not uvrho3:
# Calculate u and v at PSI-points.
u = 0.5 * (uu[:, 1:, :] + uu[:, :-1, :])
v = 0.5 * (vv[:, :, 1:] + vv[:, :, :-1])
# Calculate rho at PSI-points.
rhop = 0.5 * (rho[:, 1:, :] + rho[:, :-1, :])
rhop = 0.5 * (rhop[:, :, 1:] + rhop[:, :, :-1])
if maskfile:
u = u[:, ilat + 1, ilon + 1]
v = v[:, ilat + 1, ilon + 1]
rhop = rhop[:, ilat + 1, ilon + 1]
else:
pass
else:
# U and V both at RHO-points, no reshaping necessary.
if maskfile:
u = uu[:, ilat, ilon]
v = vv[:, ilat, ilon]
else:
u = uu
v = vv
## Find cell depths, invert z-axis direction (downward).
if maskfile:
z = -grd.vgrid.z_r[ti, :, ilat, ilon]
else:
z = -grd.vgrid.z_r[ti, :]
## Find cell heights.
zw = grd.vgrid.z_w[ti, :]
if maskfile:
dz = zw[1:, ilat, ilon] - zw[:-1, ilat, ilon] # Cell height.
else:
dz = zw[1:, :] - zw[:-1, :]
## Find cell volumes.
dV = dA * dz # [m3]
print("Squaring velocities.")
u2v2 = u * u + v * v
## Total Potential Energy (TPE) density relative to z=0 (energy/volume).
pe = rho * g * z # [J/m3]
## Horizontal Kinetic Energy (HKE) density (energy/volume).
if not uvrho3:
ke = 0.5 * rhop * u2v2 # [J/m3]
else:
ke = 0.5 * rho * u2v2 # [J/m3]
## Do volume integral to calculate TPE/HKE of the control volume.
Pe = np.sum(pe * dV) # [J]
Ke = np.sum(ke * dV) # [J]
if normalize:
Vol = dV.sum()
Pe = Pe / Vol
Ke = Ke / Vol
if verbose and tp == 1:
print("")
print("Total volume of the control volume is %e m3." % Vol)
print(
"Normalizing TPE/HKE by this volume, i.e., mean TPE/HKE density [J/m3]."
)
print("")
if verbose:
print("")
if normalize:
print("TPE/vol = %e J/m3" % Pe)
print("HKE/vol = %e J/m3" % Ke)
else:
print("TPE = %e J" % Pe)
print("HKE = %e J" % Ke)
PE = np.append(PE, Pe)
KE = np.append(KE, Ke)
return t, KE, PE
def do_load_mfdata(mesh, data, fname_list, var_list, sel_timeidx, sel_levidx, \
nsi, ndi, do_tmean, do_output,):
if ndi!=0:
#_______________________________________________________________________
# select time+depth range + compute time mean
if do_tmean:
data.value = MFDataset(fname_list[0],'r').variables[var_list[0]][sel_timeidx,:,sel_levidx].mean(axis=0)
if len(fname_list[1]): data.value2 = MFDataset(fname_list[1],'r').variables[var_list[1]][sel_timeidx,:,sel_levidx].mean(axis=0)
if len(fname_list[2]): data.value3 = MFDataset(fname_list[2],'r').variables[var_list[2]][sel_timeidx,:,sel_levidx].mean(axis=0)
else:
data.value = MFDataset(fname_list[0],'r').variables[var_list[0]][sel_timeidx,:,sel_levidx]
if len(fname_list[1]): data.value2 = MFDataset(fname_list[1],'r').variables[var_list[1]][sel_timeidx,:,sel_levidx]
if len(fname_list[2]): data.value3 = MFDataset(fname_list[2],'r').variables[var_list[2]][sel_timeidx,:,sel_levidx]
#_______________________________________________________________________
# compute potential density & temperatur if selected
if any(x in data.var for x in ['pdens','ptemp','sigma']):
dep = np.matlib.repmat(mesh.zmid[sel_levidx],nsi,1)
lat = np.matlib.repmat(mesh.nodes_2d_yg[0:mesh.n2dn],len(sel_levidx),1).transpose()
press = sw.pres(dep,lat)
press_ref = 0
if '0' in data.var : press_ref=0
elif '1' in data.var : press_ref=1000
elif '2' in data.var : press_ref=2000
elif '3' in data.var : press_ref=3000
elif '4' in data.var : press_ref=4000
elif '5' in data.var : press_ref=5000
if 'sigma' in data.var: data.lname = '$\sigma_{'+str(int(press_ref/1000))+'}$ '+data.lname
del dep,lat
if do_tmean:
if 'ptemp' in data.var: data.value = sw.ptmp(data.value2,data.value,press,press_ref)
if any(x in data.var for x in ['pdens','sigma']): data.value = sw.pden(data.value2,data.value,press,press_ref)-1000.025
else:
for it in range(0,data.value.shape[0]):
if 'ptemp' in data.var: data.value[it,:,:] = sw.ptmp(data.value2[it,:,:],data.value[it,:,:],press,press_ref)
if any(x in data.var for x in ['pdens','sigma']): data.value[it,:,:] = sw.pden(data.value2[it,:,:],data.value[it,:,:],press,press_ref)-1000.025
fname_list[1]=[]
#_______________________________________________________________________
# compute depth mean + linear interpolation to selected depth levels
if do_tmean:
data.value = do_zinterp(mesh, data.value, data.depth, ndi, data.value.shape[0], sel_levidx,do_output)
if len(fname_list[1]): data.value2 = do_zinterp(mesh, data.value2, data.depth, ndi, data.value2.shape[0], sel_levidx,do_output)
if len(fname_list[2]): data.value3 = do_zinterp(mesh, data.value3, data.depth, ndi, data.value3.shape[0], sel_levidx,do_output)
else:
data.value = do_zinterp(mesh, data.value, data.depth, ndi, data.value.shape[1], sel_levidx,do_output)
if len(fname_list[1]): data.value2 = do_zinterp(mesh, data.value2, data.depth, ndi, data.value2.shape[1], sel_levidx,do_output)
if len(fname_list[2]): data.value3 = do_zinterp(mesh, data.value3, data.depth, ndi, data.value3.shape[1], sel_levidx,do_output)
# 2D data:
else:
if do_tmean:
data.value = MFDataset(fname_list[0],'r').variables[var_list[0]][sel_timeidx,:].mean(axis=0)
if len(fname_list[1]): data.value2 = MFDataset(fname_list[1],'r').variables[var_list[1]][sel_timeidx,:].mean(axis=0)
if len(fname_list[2]): data.value3 = MFDataset(fname_list[2],'r').variables[var_list[2]][sel_timeidx,:].mean(axis=0)
else:
data.value = MFDataset(fname_list[0],'r').variables[var_list[0]][sel_timeidx,:]
if len(fname_list[1]): data.value2 = MFDataset(fname_list[1],'r').variables[var_list[1]][sel_timeidx,:]
if len(fname_list[2]): data.value3 = MFDataset(fname_list[2],'r').variables[var_list[2]][sel_timeidx,:]
# kickout single array dimension
data.value = data.value.squeeze()
if len(fname_list[1]): data.value2 = data.value2.squeeze()
if len(fname_list[2]): data.value3 = data.value3.squeeze()
return(data)
def do_load_dataloop(mesh, data, fname_list, var_list, sel_timeidx, sel_levidx, \
nti, nsi, ndi, do_tmean, do_output,):
if ndi!=0:
#_______________________________________________________________________
# initialize data.value array
if do_tmean:
data.value = np.zeros((nsi,len(sel_levidx)),dtype='float32')
if len(fname_list[1]): data.value2 = np.zeros((nsi,len(sel_levidx)),dtype='float32')
if len(fname_list[1]): data.value3 = np.zeros((nsi,len(sel_levidx)),dtype='float32')
else:
data.value = np.zeros((nti,nsi,len(sel_levidx)))
if len(fname_list[1]): data.value2 = np.zeros((nti*len(fname_list),nsi,len(sel_levidx)),dtype='float32')
if len(fname_list[1]): data.value3 = np.zeros((nti*len(fname_list),nsi,len(sel_levidx)),dtype='float32')
#_______________________________________________________________________
# select time+depth range + compute time mean
for it in range(0,len(fname_list[0])):
if do_tmean:
data.value = data.value + Dataset(fname_list[0][it],'r').variables[var_list[0]][sel_timeidx,:,sel_levidx].mean(axis=0)
if len(fname_list[1]): data.value2 = data.value2 + Dataset(fname_list[1][it],'r').variables[var_list[1]][sel_timeidx,:,sel_levidx].mean(axis=0)
if len(fname_list[2]): data.value3 = data.value3 + Dataset(fname_list[2][it],'r').variables[var_list[2]][sel_timeidx,:,sel_levidx].mean(axis=0)
else:
t_idx = sel_timeidx+nti*it
data.value[t_idx,:,:] = data.value[t_idx,:,:] + Dataset(fname_list[0][it],'r').variables[var_list[0]][sel_timeidx,:,sel_levidx]
if len(fname_list[1]): data.value2[t_idx,:,:] = data.value2[t_idx,:,:] + Dataset(fname_list[1][it],'r').variables[var_list[1]][sel_timeidx,:,sel_levidx]
if len(fname_list[2]): data.value3[t_idx,:,:] = data.value3[t_idx,:,:] + Dataset(fname_list[2][it],'r').variables[var_list[2]][sel_timeidx,:,sel_levidx]
# divide by loaded file number --> to final time mean
if do_tmean:
data.value = data.value/len(fname_list[0])
if len(fname_list[1]): data.value2 = data.value2/len(fname_list[1])
if len(fname_list[2]): data.value3 = data.value2/len(fname_list[2])
#_______________________________________________________________________
# compute potential density & temperatur if selected
if any(x in data.var for x in ['pdens','ptemp','sigma']):
dep = np.matlib.repmat(mesh.zmid[sel_levidx],nsi,1)
lat = np.matlib.repmat(mesh.nodes_2d_yg[0:mesh.n2dn],nsi,1).transpose()
press = sw.pres(dep,lat)
press_ref= 0
if '0' in data.var : press_ref=0
elif '1' in data.var : press_ref=1000
elif '2' in data.var : press_ref=2000
elif '3' in data.var : press_ref=3000
elif '4' in data.var : press_ref=4000
elif '5' in data.var : press_ref=5000
if press_ref!=0: data.lname = '$\sigma_{'+str(int(press_ref/1000))+'}$ '+data.lname
del dep,lat
if do_tmean:
if 'ptemp' in data.var: data.value = sw.ptmp(data.value2,data.value,press,press_ref)
if any(x in data.var for x in ['pdens','sigma']): data.value = sw.pden(data.value2,data.value,press,press_ref)-1000.025
else:
for it in range(0,data.value.shape[0]):
if 'ptemp' in data.var: data.value[it,:,:] = sw.ptmp(data.value2[it,:,:],data.value[it,:,:],press,press_ref)
if any(x in data.var for x in ['pdens','sigma']): data.value[it,:,:] = sw.pden(data.value2[it,:,:],data.value[it,:,:],press,press_ref)-1000.025
fname_list[1]=[]
#_______________________________________________________________________
# compute depth mean + linear interpolation to selected depth levels
data.value = do_zinterp(mesh, data.value, data.depth, ndi, nsi, sel_levidx,do_output)
if len(fname_list[1]): data.value2 = do_zinterp(mesh, data.value2, data.depth, ndi, nsi, sel_levidx,do_output)
if len(fname_list[2]): data.value3 = do_zinterp(mesh, data.value3, data.depth, ndi, nsi, sel_levidx,do_output)
# 2D data:
else:
#_______________________________________________________________________
# initialize data.value array
if do_tmean:
data.value = np.zeros((nsi,))
if len(fname_list[1]): data.value2 = np.zeros((nsi,))
if len(fname_list[1]): data.value3 = np.zeros((nsi,))
else:
data.value = np.zeros((nti,nsi))
if len(fname_list[1]): data.value2 = np.zeros((nti*len(fname_list),nsi))
if len(fname_list[1]): data.value3 = np.zeros((nti*len(fname_list),nsi))
#_______________________________________________________________________
# select time+depth range + compute time mean
for it in range(0,len(fname_list[0])):
if do_tmean:
data.value = data.value + Dataset(fname_list[0][it],'r').variables[var_list[0]][sel_timeidx,:].mean(axis=0)
if len(fname_list[1]): data.value2 = data.value2 + Dataset(fname_list[1][it],'r').variables[var_list[1]][sel_timeidx,:].mean(axis=0)
if len(fname_list[2]): data.value3 = data.value3 + Dataset(fname_list[2][it],'r').variables[var_list[2]][sel_timeidx,:].mean(axis=0)
else:
t_idx = sel_timeidx+nti*it
data.value[t_idx,:] = data.value[t_idx,:] + Dataset(fname_list[0][it],'r').variables[var_list[0]][sel_timeidx,:]
if len(fname_list[1]): data.value2[t_idx,:] = data.value2[t_idx,:] + Dataset(fname_list[1][it],'r').variables[var_list[1]][sel_timeidx,:]
if len(fname_list[2]): data.value3[t_idx,:] = data.value3[t_idx,:] + Dataset(fname_list[2][it],'r').variables[var_list[2]][sel_timeidx,:]
# divide by loaded file number --> to final time mean
if do_tmean:
data.value = data.value/len(fname_list[0])
if len(fname_list[1]): data.value2 = data.value2/len(fname_list[1])
if len(fname_list[2]): data.value3 = data.value2/len(fname_list[2])
return(data)
def energy_diagnostics(avgfile, grdfile, rho0=1025., gridid=None, maskfile='msk_shelf.npy', normalize=True, verbose=True):
"""
USAGE
-----
t, HKE, TPE = energy_diagnostics(avgfile, grdfile, rho0=1025., gridid=None, maskfile='msk_shelf.npy', normalize=True, verbose=True)
Calculates volume-integrated Horizontal Kinetic Energy (HKE) and Total Potential Energy (TPE)
within a control volume for each time record of a ROMS *.avg or *.his file.
"""
avg = Dataset(avgfile)
print("Loading outputs and grid.")
## Load domain mask.
if maskfile:
mask = np.load(maskfile)
if type(mask[0,0])==np.bool_:
pass
else:
mask=mask==1.
## Getting mask indices.
ilon,ilat = np.where(mask)
## Getting velocity field.
try:
U = avg.variables['u']
V = avg.variables['v']
uvrho3 = False
except KeyError:
U = avg.variables['u_eastward']
V = avg.variables['v_northward']
uvrho3 = True
## Get temp, salt.
temp = avg.variables['temp']
salt = avg.variables['salt']
## Get grid, time-dependent free-surface and topography.
zeta = avg.variables['zeta']
grd = pyroms.grid.get_ROMS_grid(gridid, zeta=zeta, hist_file=avgfile, grid_file=grdfile)
## Find cell widths at RHO-points.
dx = grd.hgrid.dx # Cell width in the XI-direction.
dy = grd.hgrid.dy # Cell width in the ETA-direction.
if maskfile:
dA = dx[mask]*dy[mask]
else:
dA = dx*dy
## Get pres, g and pden (at ti=0).
p0 = -grd.vgrid.z_r[0,:] # Approximation, for computational efficiency.
if maskfile:
g = grav(avg.variables['lat_rho'][:][mask])
else:
g = grav(avg.variables['lat_rho'][:])
## Get time.
t = avg.variables['ocean_time'][:]
t = t - t[0]
nt = t.size
KE = np.array([])
PE = np.array([])
for ti in range(nt):
tp = ti + 1
print("")
print("Processing time record %s of %s"%(tp,nt))
print("Calculating density.")
if maskfile:
rho = pden(salt[ti,:,ilat,ilon],temp[ti,:,ilat,ilon],p0[:,ilat,ilon],pr=0.)
else:
rho = pden(salt[ti,:],temp[ti,:],p0,pr=0.)
print("Loading velocities.")
uu = U[ti,:]
vv = V[ti,:]
if not uvrho3:
# Calculate u and v at PSI-points.
u = 0.5*(uu[:,1:,:] + uu[:,:-1,:])
v = 0.5*(vv[:,:,1:] + vv[:,:,:-1])
# Calculate rho at PSI-points.
rhop = 0.5*(rho[:,1:,:] + rho[:,:-1,:])
rhop = 0.5*(rhop[:,:,1:] + rhop[:,:,:-1])
if maskfile:
u = u[:,ilat+1,ilon+1]
v = v[:,ilat+1,ilon+1]
rhop = rhop[:,ilat+1,ilon+1]
else:
pass
else:
# U and V both at RHO-points, no reshaping necessary.
if maskfile:
u = uu[:,ilat,ilon]
v = vv[:,ilat,ilon]
else:
u = uu
v = vv
## Find cell depths, invert z-axis direction (downward).
if maskfile:
z = -grd.vgrid.z_r[ti,:,ilat,ilon]
else:
z = -grd.vgrid.z_r[ti,:]
## Find cell heights.
zw = grd.vgrid.z_w[ti,:]
if maskfile:
dz = zw[1:,ilat,ilon] - zw[:-1,ilat,ilon] # Cell height.
else:
dz = zw[1:,:] - zw[:-1,:]
## Find cell volumes.
dV = dA*dz # [m3]
print("Squaring velocities.")
u2v2 = u*u + v*v
## Total Potential Energy (TPE) density relative to z=0 (energy/volume).
pe = rho*g*z # [J/m3]
## Horizontal Kinetic Energy (HKE) density (energy/volume).
if not uvrho3:
ke = 0.5*rhop*u2v2 # [J/m3]
else:
ke = 0.5*rho*u2v2 # [J/m3]
## Do volume integral to calculate TPE/HKE of the control volume.
Pe = np.sum(pe*dV) # [J]
Ke = np.sum(ke*dV) # [J]
if normalize:
Vol = dV.sum()
Pe = Pe/Vol
Ke = Ke/Vol
if verbose and tp==1:
print("")
print("Total volume of the control volume is %e m3."%Vol)
print("Normalizing TPE/HKE by this volume, i.e., mean TPE/HKE density [J/m3].")
print("")
if verbose:
print("")
if normalize:
print("TPE/vol = %e J/m3"%Pe)
print("HKE/vol = %e J/m3"%Ke)
else:
print("TPE = %e J"%Pe)
print("HKE = %e J"%Ke)
PE = np.append(PE, Pe)
KE = np.append(KE, Ke)
return t, KE, PE
def adiabatic_level_sw(P,
S,
T,
lat,
bin_width=100.,
order=1,
ret_coefs=False,
cap=None):
"""Generate smooth buoyancy frequency profile by applying the adiabatic
levelling method of Bray and Fofonoff (1981). This function uses the older
theormodynamic toolbox, 'seawater'.
Parameters
----------
P : 1-D ndarray
Pressure [dbar]
S : 1-D ndarray
Practical salinity [-]
T : 1-D ndarray
Temperature [degrees C]
lat : float
Latitude [-90...+90]
bin_width : float, optional
Pressure bin width [dbar]
deg : int, optional
Degree of polynomial fit. (DEGREES HIGHER THAN 1 NOT PROPERLY TESTED)
ret_coefs : bool, optional
Flag to return additional argument pcoefs. False by default.
cap : optional
Flag to change proceedure at ends of array where bins may be partially
filled. None by default, meaning they are included. Can also specify
'left', 'right' or 'both' to cap method before partial bins.
Returns
-------
N2_ref : 1-D ndarray
Reference buoyancy frequency [s-2]
pcoefs : 2-D ndarray
Fitting coefficients, returned only when the flag ret_coefs is set
True.
"""
valid = np.isfinite(P) & np.isfinite(S) & np.isfinite(T)
valid = np.squeeze(np.argwhere(valid))
P_, S_, T_ = P[valid], S[valid], T[valid]
flip = False
if (np.diff(P_) < 0).all():
flip = True
P_ = np.flipud(P_)
S_ = np.flipud(S_)
T_ = np.flipud(T_)
elif (np.diff(P_) < 0).any():
raise ValueError('P must be monotonically increasing/decreasing.')
i1 = np.searchsorted(P_, P_ - bin_width / 2.)
i2 = np.searchsorted(P_, P_ + bin_width / 2.)
if cap is None:
Nd = P_.size
elif cap == 'both':
icapl = i2[0]
icapr = i1[-1]
elif cap == 'left':
icapl = i2[0]
icapr = i2[-1]
elif cap == 'right':
icapl = i1[0]
icapr = i1[-1]
else:
raise ValueError("The argument cap must be either None, 'both', 'left'"
" or 'right'")
if cap is not None:
i1 = i1[icapl:icapr]
i2 = i2[icapl:icapr]
valid = valid[icapl:icapr]
Nd = icapr - icapl
dimax = np.max(i2 - i1)
Pb = np.full((dimax, Nd), np.nan)
Sb = np.full((dimax, Nd), np.nan)
Tb = np.full((dimax, Nd), np.nan)
for i in range(Nd):
imax = i2[i] - i1[i]
Pb[:imax, i] = P_[i1[i]:i2[i]]
Sb[:imax, i] = S_[i1[i]:i2[i]]
Tb[:imax, i] = T_[i1[i]:i2[i]]
Pbar = np.nanmean(Pb, axis=0)
rho = sw.pden(Sb, Tb, Pb, Pbar)
sv = 1. / rho
rhobar = np.nanmean(rho, axis=0)
p = np.full((order + 1, Nd), np.nan)
for i in range(Nd):
imax = i2[i] - i1[i]
p[:, i] = np.polyfit(Pb[:imax, i], sv[:imax, i], order)
g = sw.g(lat, -sw.dpth(Pbar, lat))
# The factor 1e-4 is needed for conversion from dbar to Pa.
N2 = -1e-4 * rhobar**2 * g**2 * p[order - 1, :]
N2_ref = np.full_like(P, np.nan)
pcoef = np.full((order + 1, P.size), np.nan)
if flip:
N2_ref[valid] = np.flipud(N2)
pcoef[:, valid] = np.fliplr(p)
else:
N2_ref[valid] = N2
pcoef[:, valid] = p
if ret_coefs:
return N2_ref, pcoef
else:
return N2_ref
def pe(avgfile, grdfile, gridid=None, maskfile='/media/Armadillo/bkp/lado/MSc/work/ROMS/plot_outputs3/msk_shelf.npy', normalize=False, verbose=True):
"""
USAGE
-----
t, pe = pe(avgfile, grdfile, gridid=None, maskfile='/media/Armadillo/bkp/lado/MSc/work/ROMS/plot_outputs3/msk_shelf.npy', normalize=False, verbose=True):
Calculates Potential Energy (PE) change integrated within a control volume
for each time record of a ROMS *.avg or *.his file. The change is computed relative to
the initial conditions, i.e., rhop(x,y,z,t=ti) = rho(x,y,z,t=ti) - rho(x,y,z,t=t0).
[-g*(rhop^2)]
PE = Integrated in a control volume V [-----------] # [J]
[ 2*drhodz ]
If 'normalize' is set to 'True', then PE/V (mean PE density [J/m3]) is returned instead.
Reference:
----------
Cushman-Roisin (1994): Introduction to Geophysical Fluid Dynamics, page 213,
Combination of Equations 15-29 and 15-30.
"""
print("Loading outputs and grid.")
## Get outputs.
avg = Dataset(avgfile)
## Load domain mask.
if maskfile:
mask = np.load(maskfile)
if type(mask[0,0])==np.bool_:
pass
else:
mask=mask==1.
## Getting mask indices.
ilon,ilat = np.where(mask)
## Get grid, time-dependent free-surface and topography.
zeta = avg.variables['zeta']
grd = pyroms.grid.get_ROMS_grid(gridid, zeta=zeta, hist_file=avgfile, grid_file=grdfile)
## Get time.
t = avg.variables['ocean_time'][:]
t = t - t[0]
nt = t.size
## Get grid coordinates at RHO-points.
lonr, latr = avg.variables['lon_rho'][:], avg.variables['lat_rho'][:]
## Get grid spacings at RHO-points.
## Find cell widths.
dx = grd.hgrid.dx # Cell width in the XI-direction.
dy = grd.hgrid.dy # Cell width in the ETA-direction.
if maskfile:
dA = dx[mask]*dy[mask]
else:
dA = dx*dy
## Get temp, salt.
temp = avg.variables['temp']
salt = avg.variables['salt']
## Find cell heights (at ti=0).
zw = grd.vgrid.z_w[0,:] # Cell depths (at ti=0).
if maskfile:
dz = zw[1:,ilat,ilon] - zw[:-1,ilat,ilon] # Cell height.
else:
dz = zw[1:,:] - zw[:-1,:]
dz = 0.5*(dz[1:,:] + dz[:-1,:]) # Cell heights at W-points.
## Get pres, g and pden (at ti=0).
p0 = -zw # Approximation, for computational efficiency.
p0 = 0.5*(p0[1:,:]+p0[:-1,:])
if maskfile:
rho0 = pden(salt[0,:,ilat,ilon],temp[0,:,ilat,ilon],p0[:,ilat,ilon],pr=0.)
else:
rho0 = pden(salt[0,:],temp[0,:],p0,pr=0.)
if maskfile:
g = grav(latr[mask])
else:
g = grav(latr)
drho0 = rho0[1:,:] - rho0[:-1,:]
rho0z = drho0/dz # Background potential density vertical gradient.
PE = np.array([])
for ti in range(nt):
tp = ti + 1
print("Processing time record %s of %s"%(tp,nt))
if maskfile:
rhoi = pden(salt[ti,:,ilat,ilon],temp[ti,:,ilat,ilon],p0[:,ilat,ilon],pr=0.)
else:
rhoi = pden(salt[ti,:],temp[ti,:],p0,pr=0.)
rhop = rhoi - rho0 # Density anomaly, i.e., rho(x,y,z,t=ti) - rho(x,y,z,t=0)
rhop = 0.5*(rhop[1:,:] + rhop[:-1,:])
## Find cell heights.
zw = grd.vgrid.z_w[ti,:] # Cell depths (at ti=0).
if maskfile:
dz = zw[1:,ilat,ilon] - zw[:-1,ilat,ilon] # Cell height.
else:
dz = zw[1:,:] - zw[:-1,:]
## Find cell volumes.
print(dx.shape,dy.shape,dz.shape)
dV = dA*dz # [m3]
dV = 0.5*(dV[1:,:]+dV[:-1,:])
## Gravitational Available Potential Energy density (energy/volume).
print(g.shape)
print(rhop.shape)
print(rho0z.shape)
pe = -g*(rhop**2)/(2*rho0z) # [J/m3]
## Do volume integral to calculate Gravitational Available Potential Energy of the control volume.
Pe = np.sum(pe*dV) # [J]
if normalize:
V = dV.sum()
Pe = Pe/V
print("")
print("Total volume of the control volume is %e m3."%V)
print("Normalizing PE by this volume, i.e., mean PE density [J/m3].")
print("")
if verbose:
if normalize:
print("PE = %e J/m3"%Pe)
else:
print("PE = %e J"%Pe)
PE = np.append(PE, Pe)
return t, PE
T_clim_training[:, 0][:, np.newaxis], tos.shape[1], axis=1)
adt = adt - np.repeat(
SH_clim_training[:, 0][:, np.newaxis], tos.shape[1], axis=1)
sos = sos - np.repeat(
S_clim_training[:, 0][:, np.newaxis], tos.shape[1], axis=1)
####################################
# pre-process training data
####################################
P = np.zeros(T.shape)
delta_P = 10.
for i in range(P.shape[0]):
P[i, :] = depth
D = sw.pden(S, T, P, pr=0) #computes density profiles from in situ T and S
D_std = sw.pden(S * 0 + 35, T * 0, P,
pr=0) #computes standard density profiles
SVA = (1. / D) #computes specific volume
SVA_std = (1. / D_std) #computes specific volume standard profiles
g = 9.81
SH = np.zeros(T.shape)
for ik in range(T.shape[1]):
SH[:, ik] = 1e6 * np.sum(SVA[:, ik:T.shape[1]],
axis=1) * delta_P / g #steric heights in cm
SH[:, ik] = SH[:, ik] - 1e6 * np.sum(SVA_std[:, ik:T.shape[1]],
axis=1) * delta_P / g
T = T - T_clim_training
S = S - S_clim_training
def TSplot(
S,
T,
Pref=0,
size=None,
color=None,
ax=None,
rho_levels=[],
labels=True,
label_spines=True,
plot_distrib=True,
Sbins=30,
Tbins=30,
plot_kwargs=None,
hexbin=True,
fontsize=9,
kind=None,
equalize=True,
):
"""
T-S plot. The default is to scatter, but hex-binning is also an option.
Parameters
----------
S, T : float32
Salinity, temperature.
Pref : float32, optional
Reference pressure level.
size: int, numpy.ndarray, xr.DataArray
Passed to scatter.
color: string, numpy.ndarray, xr.DataArray
Passed as 'c' to scatter and 'C' to hexbin.
ax : optional, matplotlib.Axes
Axes to plot to.
rho_levels : optional
Density contour levels.
labels : bool, optional
Label density contours?
label_spines : bool, optional
Fancy spine labelling inspired by Arnold Gordon's plots.
fontsize: int, optional
font size for labels
plot_distrib : bool, optional
Plot marginal distributions of T, S?
Sbins, Tbins : int, optional
Number of T, S bins for marginal distributions.
hexbin : bool, optional
hexbin instead of scatter plot?
plot_kwargs: dict, optional
extra kwargs passed directly to scatter or hexbin. Cannot contain
's', 'c' or 'C'.
Returns
-------
handles: dict,
cs : Handle to density ContourSet.
ts : Handle to T-S scatter
Thist, Shist : handles to marginal distributions
axes : list of Axes.
"""
# colormap = cmo.cm.matter
#
if kind is None:
if hexbin is True:
kind = "hexbin"
elif hexbin is False:
kind = "scatter"
if plot_kwargs is None:
plot_kwargs = {}
if any([kw in plot_kwargs for kw in ["c", "C", "s"]]):
raise ValueError(
"plot_kwargs cannot contain c, C, or s. "
+ "Please specify size or color as appropriate."
)
scatter_defaults = {"edgecolors": None, "alpha": 0.5}
labels = False if rho_levels is None else labels
axes = dict()
handles = dict()
if ax is None:
f = plt.figure(constrained_layout=True)
if plot_distrib:
gs = mpl.gridspec.GridSpec(5, 5, figure=f)
axes["ts"] = f.add_subplot(gs[1:, :-1])
axes["s"] = f.add_subplot(gs[0, :-1], sharex=axes["ts"])
axes["t"] = f.add_subplot(gs[1:, -1], sharey=axes["ts"])
ax = axes["ts"]
else:
ax = plt.gca()
elif isinstance(ax, dict):
axes = ax
ax = axes["ts"]
axes["ts"] = ax
nanmask = np.isnan(S.values) | np.isnan(T.values)
if size is not None:
nanmask = nanmask | np.isnan(size)
if color is not None and not isinstance(color, str):
nanmask = nanmask | np.isnan(color)
if len(np.atleast_1d(Sbins)) > 1:
nanmask = nanmask | (S.values < np.min(Sbins)) | (S.values > np.max(Sbins))
if len(np.atleast_1d(Tbins)) > 1:
nanmask = nanmask | (T.values < np.min(Tbins)) | (T.values > np.max(Tbins))
salt = _flatten_data(S.where(~nanmask))
temp = _flatten_data(T.where(~nanmask))
if size is not None and hasattr(size, "values"):
size = _flatten_data(size.where(~nanmask))
if color is not None and hasattr(color, "values"):
color = _flatten_data(color.where(~nanmask))
# TODO: plot outliers separately with hexbin
# _prctile = 2
# outlierT = np.percentile(temp, [_prctile, 100 - _prctile])
# outlierS = np.percentile(salt, [_prctile, 100 - _prctile])
# outliermask = np.logical_or(
# np.logical_or(salt > outlierS[1], salt < outlierS[0]),
# np.logical_or(temp > outlierT[1], temp < outlierT[0]))
if kind == "hexbin":
hexbin_defaults = {"cmap": mpl.cm.Blues, "mincnt": 1}
if not isinstance(color, str):
hexbin_defaults["C"] = color
hexbin_defaults.update(plot_kwargs)
handles["ts"] = ax.hexbin(
salt, temp, gridsize=(Sbins, Tbins), **hexbin_defaults
)
# ax.plot(salt[outliermask], temp[outliermask], '.', 'gray')
#
elif kind == "hist":
from xhistogram.core import histogram
if isinstance(Sbins, int):
Sbins = np.linspace(S.data.min(), S.data.max(), Sbins)
if isinstance(Tbins, int):
Tbins = np.linspace(T.data.min(), T.data.max(), Tbins)
hist = histogram(salt, temp, bins=(Sbins, Tbins))
if equalize:
from skimage.exposure import equalize_adapthist
hist = equalize_adapthist(hist.data)
hist = hist.astype(float)
# print(np.percentile(hist.ravel(), 10))
hist[hist < np.percentile(hist[hist > 0].ravel(), 10)] = np.nan
handles["ts"] = ax.pcolormesh(Sbins, Tbins, hist.T, **plot_kwargs)
elif kind == "scatter":
scatter_defaults.update(plot_kwargs)
handles["ts"] = ax.scatter(
salt,
temp,
s=size if size is not None else 12,
c=color,
**scatter_defaults,
)
# defaults.pop('alpha')
# ts = ax.scatter(flatten_data(S), flatten_data(T),
# s=flatten_data(size), c=[[0, 0, 0, 0]],
# **defaults)
if rho_levels is not None:
Slim = ax.get_xlim()
Tlim = ax.get_ylim()
Tvec = np.linspace(Tlim[0], Tlim[1], 40)
Svec = np.linspace(Slim[0], Slim[1], 40)
[Smat, Tmat] = np.meshgrid(Svec, Tvec)
# background ρ contours are T, S at the reference level
ρ = sw.pden(Smat, Tmat, Pref, Pref) - 1000
rho_levels = np.asarray(rho_levels)
if np.all(rho_levels > 1000):
rho_levels = rho_levels - 1000
if not (rho_levels.size > 0):
rho_levels = 7
handles["rho_contours"] = ax.contour(
Smat,
Tmat,
ρ,
colors="gray",
levels=rho_levels,
linestyles="solid",
zorder=-1,
linewidths=0.5,
)
ax.set_xlim([Smat.min(), Smat.max()])
ax.set_ylim([Tmat.min(), Tmat.max()])
if plot_distrib:
hist_args = dict(color=color, density=True, histtype="step")
handles["Thist"] = axes["t"].hist(
temp, orientation="horizontal", bins=Tbins, **hist_args
)
axes["t"].set_xticklabels([])
axes["t"].set_xticks([])
axes["t"].spines["bottom"].set_visible(False)
handles["Shist"] = axes["s"].hist(salt, bins=Sbins, **hist_args)
axes["s"].set_yticks([])
axes["s"].set_yticklabels([])
axes["s"].spines["left"].set_visible(False)
if labels:
if label_spines:
plots.contour_label_spines(
handles["rho_contours"], fmt="%.1f", fontsize=fontsize
)
else:
clabels = ax.clabel(
handles["cs"], fmt="%.1f", inline=True, inline_spacing=10
)
[txt.set_backgroundcolor([0.95, 0.95, 0.95, 0.75]) for txt in clabels]
ax.text(
0,
1.005,
" $σ_" + str(Pref) + "$",
transform=ax.transAxes,
va="bottom",
fontsize=fontsize + 2,
color="gray",
)
ax.spines["right"].set_visible(True)
ax.spines["top"].set_visible(True)
ax.set_xlabel("S")
ax.set_ylabel("T")
return handles, axes
