def Main(bit_fname, jop_fname):
byte_buffer = DecodeJOP(jop_fname)
file('bytes.bin', 'wt').write(byte_buffer)
bits = file(bit_fname).read()
# Program FPGA and send JOP file
print 'Connecting to lab service...'
auth = vlab.loadAuthorisation(VL_KEY)
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
uproto = vlab.VlabUARTProtocol()
print 'Connecting to board'
bid = yield vl.connect(BOARD_NAME)
print 'Sending bit file (%u bytes)' % len(bits)
bid = yield vl.sendBitfile(bits)
print 'Bitfile sent, bid %u' % bid
rc = yield vl.programFPGA(0, bid)
print 'Programming complete, rc %u' % rc
yield vl.setUART(0, 115200)
print 'SetUART rc %u' % rc
rc = yield vl.openUART(0, uproto)
print 'OpenUART rc %u' % rc
# Send the program
uproto.write(byte_buffer)
print 'JOP Programming complete'
fifo = collections.deque()
stop = False
# Terminal mode
while ( not stop ):
byte = yield uproto.read(1)
byte = ord(byte)
if ( not (( byte in (10, 13))
or ( 32 <= byte < 127 ))):
byte = ord('.')
byte = chr(byte)
sys.stdout.write(byte)
sys.stdout.flush()
fifo.append(byte)
if ( len(fifo) > len(EXIT_STRING) ):
fifo.popleft()
if ( ''.join(fifo) == EXIT_STRING ):
stop = True
vl.disconnect()
print ''
print ''
def Main(bit_fname, jop_fname):
byte_buffer = DecodeJOP(jop_fname)
file('bytes.bin', 'wt').write(byte_buffer)
bits = file(bit_fname).read()
# Program FPGA and send JOP file
print 'Connecting to lab service...'
auth = vlab.loadAuthorisation(VL_KEY)
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
uproto = vlab.VlabUARTProtocol()
print 'Connecting to board'
bid = yield vl.connect(BOARD_NAME)
print 'Sending bit file (%u bytes)' % len(bits)
bid = yield vl.sendBitfile(bits)
print 'Bitfile sent, bid %u' % bid
rc = yield vl.programFPGA(0, bid)
print 'Programming complete, rc %u' % rc
yield vl.setUART(0, 115200)
print 'SetUART rc %u' % rc
rc = yield vl.openUART(0, uproto)
print 'OpenUART rc %u' % rc
# Send the program
uproto.write(byte_buffer)
print 'JOP Programming complete'
fifo = collections.deque()
stop = False
# Terminal mode
while (not stop):
byte = yield uproto.read(1)
byte = ord(byte)
if (not ((byte in (10, 13)) or (32 <= byte < 127))):
byte = ord('.')
byte = chr(byte)
sys.stdout.write(byte)
sys.stdout.flush()
fifo.append(byte)
if (len(fifo) > len(EXIT_STRING)):
fifo.popleft()
if (''.join(fifo) == EXIT_STRING):
stop = True
vl.disconnect()
print ''
print ''
def Run():
print "Initialising..."
try:
bt = int(sys.argv[1])
except:
bt = None
byte_buffer = DecodeJOP("../../java/target/dist/bin/HWMethTest.jop")
bits = file("ml401.bit").read()
debug_chain = vlabif.DebugConfig(chain_config_file="chain_config.py")
vlihp = vlabif.VlabInterfaceProtocol(debug=False)
auth = vlab.loadAuthorisation("../../vluser.key")
dbg = vlabif.DebugDriver(debug_chain, debug=False)
uproto = vlab.VlabUARTProtocol()
print "Breakpoint type = %s" % bt
print "Connecting to lab service... (1)"
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print "Connecting to board... (1)"
yield vl.connect(BOARD_NAME)
yield vl.setUART(1, 115200)
yield vl.setUART(0, 115200)
print "FPGA programming..."
bid = yield vl.sendBitfile(bits)
yield vl.programFPGA(0, bid)
print "Starting vlabifhw and debugger..."
yield vl.openUART(1, vlihp)
yield vlihp.start()
vlihp.openChannel(vlihp.num_channels - 1, dbg)
yield dbg.reset()
yield dbg.capture()
data = yield dbg.downloadChain()
if bt != None:
data["break_command"].setOutput(bt & 0x7)
yield dbg.uploadChain()
yield dbg.ready()
yield dbg.setControlLines(free_run_break=True)
print "Connecting to lab service... (2)"
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print "Connecting to board... (2)"
yield vl.connect(BOARD_NAME)
yield vl.openUART(0, uproto)
print "Sending JOP data and running to breakpoint..."
uproto.write(byte_buffer)
discard = yield uproto.read(int(len(byte_buffer) * 0.95))
if bt != None:
if bt < 8:
print "run to break"
yield runToBreak(dbg)
print "hit"
yield activityCapture(dbg)
return
else:
yield dbg.setControlLines(free_run=True)
yield delay(5.0)
yield activityCapture(dbg)
return
yield dbg.setControlLines(free_run=True)
fifo = collections.deque()
stop = False
# Terminal mode
while not stop:
byte = yield uproto.read(1)
byte = ord(byte)
if not ((byte in (10, 13)) or (32 <= byte < 127)):
byte = ord(".")
byte = chr(byte)
sys.stdout.write(byte)
sys.stdout.flush()
fifo.append(byte)
if len(fifo) > len(EXIT_STRING):
fifo.popleft()
if "".join(fifo) == EXIT_STRING:
stop = True
# vl.disconnect()
reactor.stop()
return
def Run():
print 'Initialising...'
try:
bt = int(sys.argv[1])
except:
bt = None
byte_buffer = DecodeJOP("../../java/target/dist/bin/HWMethTest.jop")
bits = file("ml401.bit").read()
debug_chain = vlabif.DebugConfig(chain_config_file="chain_config.py")
vlihp = vlabif.VlabInterfaceProtocol(debug=False)
auth = vlab.loadAuthorisation("../../vluser.key")
dbg = vlabif.DebugDriver(debug_chain, debug=False)
uproto = vlab.VlabUARTProtocol()
print 'Breakpoint type = %s' % bt
print 'Connecting to lab service... (1)'
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print 'Connecting to board... (1)'
yield vl.connect(BOARD_NAME)
yield vl.setUART(1, 115200)
yield vl.setUART(0, 115200)
print 'FPGA programming...'
bid = yield vl.sendBitfile(bits)
yield vl.programFPGA(0, bid)
print 'Starting vlabifhw and debugger...'
yield vl.openUART(1, vlihp)
yield vlihp.start()
vlihp.openChannel(vlihp.num_channels - 1, dbg)
yield dbg.reset()
yield dbg.capture()
data = yield dbg.downloadChain()
if (bt != None):
data['break_command'].setOutput(bt & 0x7)
yield dbg.uploadChain()
yield dbg.ready()
yield dbg.setControlLines(free_run_break=True)
print 'Connecting to lab service... (2)'
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print 'Connecting to board... (2)'
yield vl.connect(BOARD_NAME)
yield vl.openUART(0, uproto)
print 'Sending JOP data and running to breakpoint...'
uproto.write(byte_buffer)
discard = yield uproto.read(int(len(byte_buffer) * 0.95))
if (bt != None):
if (bt < 8):
print 'run to break'
yield runToBreak(dbg)
print 'hit'
yield activityCapture(dbg)
return
else:
yield dbg.setControlLines(free_run=True)
yield delay(5.0)
yield activityCapture(dbg)
return
yield dbg.setControlLines(free_run=True)
fifo = collections.deque()
stop = False
# Terminal mode
while (not stop):
byte = yield uproto.read(1)
byte = ord(byte)
if (not ((byte in (10, 13)) or (32 <= byte < 127))):
byte = ord('.')
byte = chr(byte)
sys.stdout.write(byte)
sys.stdout.flush()
fifo.append(byte)
if (len(fifo) > len(EXIT_STRING)):
fifo.popleft()
if (''.join(fifo) == EXIT_STRING):
stop = True
#vl.disconnect()
reactor.stop()
return
def Run():
if ( len(sys.argv) != 2 ):
print 'Usage: %s <JOP file>' % sys.argv[ 1 ]
reactor.stop()
return
print 'Loading...'
name = sys.argv[ 1 ]
print '?', name
if ( not os.path.exists(name) ):
name += '.jop'
print '?', name
if ( not os.path.exists(name) ):
name = "../../java/target/dist/bin/" + name
print '?', name
if ( not os.path.exists(name) ):
print 'JOP file not found'
reactor.stop()
return
print 'Initialising...', name
byte_buffer = DecodeJOP(name)
bits = file("ml401.bit").read()
debug_chain = vlabif.DebugConfig(chain_config_file="chain_config.py")
vlihp = vlabif.VlabInterfaceProtocol(debug=False)
auth = vlab.loadAuthorisation("../../vluser.key")
dbg = vlabif.DebugDriver(debug_chain, debug=False)
uproto = vlab.VlabUARTProtocol()
print 'Connecting to lab service... (1)'
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print 'Connecting to board... (1)'
yield vl.connect(BOARD_NAME)
yield vl.setUART(1, 115200)
yield vl.setUART(0, 115200)
print 'FPGA programming...'
bid = yield vl.sendBitfile(bits)
yield vl.programFPGA(0, bid)
print 'Starting vlabifhw and debugger...'
yield vl.openUART(1, vlihp)
yield vlihp.start()
vlihp.openChannel(vlihp.num_channels - 1, dbg)
yield dbg.reset()
yield dbg.capture()
data = yield dbg.downloadChain()
data[ 'break_command' ].setOutput(0) # BREAKPOINT TYPE
yield dbg.uploadChain()
yield dbg.ready()
yield dbg.setControlLines(free_run_break=True)
print 'Connecting to lab service... (2)'
vlf = vlab.VlabClientFactory(auth)
reactor.connectTCP(auth.relay_server_name, 22, vlf)
vl = yield vlf.getChannel()
print 'Connecting to board... (2)'
yield vl.connect(BOARD_NAME)
yield vl.openUART(0, uproto)
print 'Sending JOP data and running to breakpoint...'
uproto.write(byte_buffer)
yield dbg.setControlLines(free_run=True)
fifo = collections.deque()
stop = False
# Terminal mode
while ( not stop ):
byte = yield uproto.read(1)
byte = ord(byte)
if ( not (( byte in (10, 13))
or ( 32 <= byte < 127 ))):
byte = ord('.')
byte = chr(byte)
sys.stdout.write(byte)
sys.stdout.flush()
fifo.append(byte)
if ( len(fifo) > len(EXIT_STRING) ):
fifo.popleft()
if ( ''.join(fifo) == EXIT_STRING ):
stop = True
#vl.disconnect()
reactor.stop()
return
