def plot(MillePedeUser, alignables, mode, struct, parentPlot, config):
logger = logging.getLogger("mpsvalidate")
# skip empty
number = 0
for i in range(3):
if(parentPlot.histo[i].GetEntries() == 0):
number += 1
if (number == 3):
return
# number of bins to start
numberOfBins = 10000
######################################################################
# initialize data hierarchy
# plots[subStrucut]
#
plots = []
# initialize histograms
for subStructNumber, subStruct in enumerate(struct.get_children()):
plots.append(mpsv_classes.PlotData(mode))
# use a copy for shorter name
plot = plots[subStructNumber]
for i in range(3):
if (mode == "xyz"):
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name() + " " + subStruct.get_name(), plot.xyz[
i], mode), "Parameter {0}".format(plot.xyz[i]), numberOfBins, -1000, 1000))
else:
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name() + " " + subStruct.get_name(), plot.xyz[
i], mode), "Parameter {0}".format(plot.xyz[i]), numberOfBins, -0.1, 0.1))
plot.histo[i].SetLineColor(6)
plot.histo[i].SetStats(0)
# add labels
plot.title = ROOT.TPaveLabel(
0.1, 0.8, 0.9, 0.9, "Module: {0} {1}".format(struct.get_name(), mode))
plot.text = ROOT.TPaveText(0.05, 0.1, 0.95, 0.75)
plot.text.SetTextAlign(12)
plot.text.SetTextSizePixels(20)
# save copy
plots[subStructNumber] = plot
######################################################################
# fill histogram
#
for line in MillePedeUser:
# is module ?
if (line.ObjId == 1):
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
# module in struct ?
if (subStruct.contains_detid(line.Id)):
for i in range(3):
if (abs(line.Par[plot.data[i]]) != 999999):
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].Fill(
10000 * line.Par[plot.data[i]])
else:
plot.histo[i].Fill(line.Par[plot.data[i]])
# save copy
plots[subStructNumber] = plot
######################################################################
# find the best range
#
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
for i in range(3):
if (plot.histo[i].GetEntries() != 0 and plot.histo[i].GetStdDev() != 0):
# use binShift of the hole structure
binShift = parentPlot.usedRange[i]
# count entries which are not shown anymore
# bin 1 to begin of histogram
for j in range(1, numberOfBins / 2 - binShift):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# from the end of shown bins to the end of histogram
for j in range(numberOfBins / 2 + binShift, plot.histo[i].GetNbinsX()):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# merge bins, ca. 100 should be visible in the resulting plot
mergeNumberBins = binShift
# skip empty histogram
if (mergeNumberBins != 0):
# the 2*maxBinShift bins should shrink to 100 bins
mergeNumberBins = int(
2. * mergeNumberBins / config.numberofbins)
# the total number of bins should be dividable by the bins
# shrinked together
if (mergeNumberBins == 0):
mergeNumberBins = 1
while (numberOfBins % mergeNumberBins != 0 and mergeNumberBins != 1):
mergeNumberBins -= 1
# Rebin and save new created histogram and axis
plot.histo[i] = plot.histo[i].Rebin(mergeNumberBins)
# set view range. it is important to note that the number of bins have changed with the rebinning
# the total number and the number of shift must be
# corrected with / mergeNumberBins
plot.histo[i].GetXaxis().SetRange(int(numberOfBins / (2 * mergeNumberBins) - binShift /
mergeNumberBins), int(numberOfBins / (2 * mergeNumberBins) + binShift / mergeNumberBins))
# save copy
plots[subStructNumber] = plot
######################################################################
# make the plots
#
canvas = ROOT.TCanvas("SubStruct_{0}_{1}".format(
struct.get_name(), mode), "Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
canvas.cd(1)
parentPlot.title.Draw()
legend = ROOT.TLegend(0.05, 0.1, 0.95, 0.75)
for i in range(3):
canvas.cd(i + 2)
# find y maximum
maximum = []
if (parentPlot.histo[i].GetEntries() == 0):
continue
# normalize parent
parentPlot.histo[i].Scale(1. / parentPlot.histo[i].Integral())
maximum.append(parentPlot.histo[i].GetMaximum())
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
if (plot.histo[i].GetEntries() > 0):
plot.histo[i].Scale(1. / plot.histo[i].Integral())
maximum.append(plot.histo[i].GetMaximum())
# save copy
plots[subStructNumber] = plot
# set range and plot
parentPlot.histo[i].GetYaxis().SetRangeUser(0., 1.1 * max(maximum))
parentPlot.histo[i].SetYTitle("normalized")
parentPlot.histo[i].Draw()
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber].histo[i]
plot.SetLineColorAlpha(subStructNumber + 2, 0.5)
plot.Draw("same")
if (i == 0):
legend.AddEntry(plot, subStruct.get_name(), "l")
canvas.cd(1)
legend.Draw()
# draw identification
ident = mpsv_style.identification(config)
ident.Draw()
canvas.Update()
# save as pdf
canvas.Print(
"{0}/plots/pdf/subModules_{1}_{2}.pdf".format(config.outputPath, mode, struct.get_name()))
# export as png
image = ROOT.TImage.Create()
image.FromPad(canvas)
image.WriteImage(
"{0}/plots/png/subModules_{1}_{2}.png".format(config.outputPath, mode, struct.get_name()))
# add to output list
output = mpsv_classes.OutputData(plottype="subMod", name=struct.get_name(), number=subStructNumber + 1,
parameter=mode, filename="subModules_{0}_{1}".format(mode, struct.get_name()))
config.outputList.append(output)
def plot(MillePedeUser, alignables, config):
logger = logging.getLogger("mpsvalidate")
alignables.create_list(MillePedeUser)
# number of bins to start
numberOfBins = 10000
######################################################################
# initialize data hierarchy
# plots[mode][struct]
#
plots = []
# loop over mode
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
plots.append([])
# loop over structures
for structNumber, struct in enumerate(alignables.structures):
plots[modeNumber].append(mpsv_classes.PlotData(mode))
# initialize histograms
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
for i in range(3):
if (mode == "xyz"):
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name(), plot.xyz[
i], mode), "", numberOfBins, -1000, 1000))
else:
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name(), plot.xyz[
i], mode), "", numberOfBins, -0.1, 0.1))
if (plot.unit!=""):
plot.histo[i].SetXTitle("#Delta"+plot.xyz[i]+" ["+plot.unit+"]")
else:
plot.histo[i].SetXTitle("#Delta"+plot.xyz[i])
plot.histo[i].SetYTitle("number of alignables")
plot.histo[i].GetXaxis().SetTitleOffset(0.8)
plot.histoAxis.append(plot.histo[i].GetXaxis())
# add labels
plot.title = ROOT.TPaveLabel(
0.1, 0.8, 0.9, 0.9, "Module: {0} {1}".format(struct.get_name(), mode))
plot.text = ROOT.TPaveText(0.05, 0.1, 0.95, 0.75)
plot.text.SetTextAlign(12)
plot.text.SetTextSizePixels(20)
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# fill histogram
#
for line in MillePedeUser:
# is module ?
if (line.ObjId == 1):
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
# module in struct ?
if (struct.contains_detid(line.Id)):
for i in range(3):
if (abs(line.Par[plot.data[i]]) != 999999):
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].Fill(
10000 * line.Par[plot.data[i]])
else:
plot.histo[i].Fill(line.Par[plot.data[i]])
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# find the best range
#
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
for i in range(3):
# get first and last bin with content and chose the one which
# has a greater distance to the center
if (abs(numberOfBins / 2 - plot.histo[i].FindFirstBinAbove()) > abs(plot.histo[i].FindLastBinAbove() - numberOfBins / 2)):
plot.maxBinShift[i] = abs(
numberOfBins / 2 - plot.histo[i].FindFirstBinAbove())
# set the maxShift value
plot.maxShift[i] = plot.histo[i].GetBinCenter(
plot.histo[i].FindFirstBinAbove())
else:
plot.maxBinShift[i] = abs(
plot.histo[i].FindLastBinAbove() - numberOfBins / 2)
# set the maxShift value
plot.maxShift[i] = plot.histo[i].GetBinCenter(
plot.histo[i].FindLastBinAbove())
# skip empty histogram
if (abs(plot.maxBinShift[i]) == numberOfBins / 2 + 1):
plot.maxBinShift[i] = 0
# three types of ranges
# 1. multiple of standard dev
if (config.rangemode == "stddev"):
for i in range(3):
if (plot.histo[i].GetEntries() != 0 and plot.histo[i].GetStdDev() != 0):
# if the plotrange is much bigger than the standard
# deviation use config.widthstdev * StdDev als Range
if (max(plot.maxShift) / plot.histo[i].GetStdDev() > config.defpeak):
# corresponding bin config.widthstdev*StdDev
binShift = int(plot.histo[i].FindBin(
config.widthstddev * plot.histo[i].GetStdDev()) - numberOfBins / 2)
else:
binShift = max(plot.maxBinShift)
# save used binShift
plot.binShift[i] = binShift
# 2. show all
if (config.rangemode == "all"):
for i in range(3):
plot.binShift[i] = plot.maxBinShift[i]
# 3. use given ranges
if (config.rangemode == "given"):
for i in range(3):
if (mode == "xyz"):
valuelist = config.rangexyzM
if (mode == "rot"):
valuelist = config.rangerotM
if (mode == "dist"):
valuelist = config.rangedistM
for value in valuelist:
# maximum smaller than given value
if (abs(plot.maxShift[i]) < value):
binShift = value
break
# if not possible, force highest
if (abs(plot.maxShift[i]) > valuelist[-1]):
binShift = valuelist[-1]
# calculate binShift
plot.binShift[i] = int(
binShift / plot.histo[i].GetBinWidth(1))
# all plot the same range
if (config.samerange == 1):
for i in range(3):
plot.binShift[i] = max(plot.binShift)
# save used range
for i in range(3):
plot.usedRange[i] = plot.binShift[i]
# count entries which are not shown anymore
for i in range(3):
# bin 1 to begin of histogram
for j in range(1, numberOfBins / 2 - plot.binShift[i]):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# from the end of shown bins to the end of histogram
for j in range(numberOfBins / 2 + plot.binShift[i], plot.histo[i].GetNbinsX()):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# apply new range
for i in range(3):
if (plot.histo[i].GetEntries() != 0):
# merge bins, ca. 100 should be visible in the resulting
# plot
mergeNumberBins = plot.binShift[i]
# skip empty histogram
if (mergeNumberBins != 0):
# the 2*maxBinShift bins should shrink to 100 bins
mergeNumberBins = int(
2. * mergeNumberBins / config.numberofbins)
# the total number of bins should be dividable by the
# bins shrinked together
if (mergeNumberBins == 0):
mergeNumberBins = 1
while (numberOfBins % mergeNumberBins != 0 and mergeNumberBins != 1):
mergeNumberBins -= 1
# Rebin and save new created histogram and axis
plot.histo[i] = plot.histo[i].Rebin(mergeNumberBins)
plot.histoAxis[i] = plot.histo[i].GetXaxis()
# set view range. it is important to note that the number of bins have changed with the rebinning
# the total number and the number of shift must be
# corrected with / mergeNumberBins
plot.histoAxis[i].SetRange(int(numberOfBins / (2 * mergeNumberBins) - plot.binShift[
i] / mergeNumberBins), int(numberOfBins / (2 * mergeNumberBins) + plot.binShift[i] / mergeNumberBins))
# error if shift is bigger than limit
limit = config.limit[mode]
for i in range(3):
# skip empty
if (plot.histo[i].GetEntries() > 0):
if (plot.unit!=""):
plot.text.AddText("max. shift {0}: {1:.2} {2}".format(plot.xyz[i], plot.maxShift[i], plot.unit))
if (abs(plot.maxShift[i]) > limit):
plot.text.AddText("! {0} shift bigger than {1} {2}".format(plot.xyz[i], limit, plot.unit))
else:
plot.text.AddText("max. shift {0}: {1:.2}".format(plot.xyz[i], plot.maxShift[i]))
if (abs(plot.maxShift[i]) > limit):
plot.text.AddText("! {0} shift bigger than {1}".format(plot.xyz[i], limit))
if (plot.hiddenEntries[i] != 0):
plot.text.AddText("! {0}: {1} outlier !".format(
plot.xyz[i], int(plot.hiddenEntries[i])))
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# make the plots
#
# show the skewness in the legend
ROOT.gStyle.SetOptStat("emrs")
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
canvas = ROOT.TCanvas("canvasModules{0}_{1}".format(
struct.get_name(), mode), "Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
canvas.cd(1)
plot.title.Draw()
plot.text.Draw()
# draw identification
ident = mpsv_style.identification(config)
ident.Draw()
# is there any plot?
plotNumber = 0
# loop over coordinates
for i in range(3):
if(plot.histo[i].GetEntries() > 0):
plotNumber += 1
canvas.cd(i + 2)
mpsv_style.setstatsize(canvas, plot.histo[i], config)
plot.histo[i].DrawCopy()
if (plotNumber == 0):
break
canvas.Update()
# save as pdf
canvas.Print(
"{0}/plots/pdf/modules_{1}_{2}.pdf".format(config.outputPath, mode, struct.get_name()))
# export as png
image = ROOT.TImage.Create()
image.FromPad(canvas)
image.WriteImage(
"{0}/plots/png/modules_{1}_{2}.png".format(config.outputPath, mode, struct.get_name()))
# add to output list
output = mpsv_classes.OutputData(plottype="mod", name=struct.get_name(),
parameter=mode, filename="modules_{0}_{1}".format(mode, struct.get_name()))
config.outputList.append(output)
######################################################################
# make plots with substructure
#
if config.showsubmodule:
alignables.create_children_list()
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
mpsv_subModule.plot(MillePedeUser, alignables,
mode, struct, plot, config)
def plot(MillePedeUser, alignables, config):
logger = logging.getLogger("mpsvalidate")
# more space for labels
ROOT.gStyle.SetPadBottomMargin(0.25)
ROOT.gStyle.SetOptStat("emrs")
for mode in ["xyz", "rot"]:
big = mpsv_classes.PlotData(mode)
# count number of needed bins and max shift
for line in MillePedeUser:
if (line.ObjId != 1):
for i in range(3):
if (abs(line.Par[big.data[i]]) != 999999):
if (mode == "xyz"):
line.Par[big.data[i]] *= 10000
big.numberOfBins[i] += 1
if (abs(line.Par[big.data[i]]) > abs(big.maxShift[i])):
big.maxShift[i] = line.Par[big.data[i]]
# initialize histograms
for i in range(3):
big.histo.append(ROOT.TH1F("Big Structure {0} {1}".format(big.xyz[i], mode), "", big.numberOfBins[i], 0, big.numberOfBins[i]))
if (big.unit!=""):
big.histo[i].SetYTitle("#Delta"+big.xyz[i]+" ["+big.unit+"]")
else:
big.histo[i].SetYTitle("#Delta"+big.xyz[i])
big.histo[i].SetStats(0)
big.histo[i].SetMarkerStyle(21)
big.histoAxis.append(big.histo[i].GetXaxis())
# bigger labels for the text
big.histoAxis[i].SetLabelSize(0.06)
big.histo[i].GetYaxis().SetTitleOffset(1.6)
# add labels
big.title = ROOT.TPaveLabel(
0.1, 0.8, 0.9, 0.9, "High Level Structures {0}".format(mode))
big.text = ROOT.TPaveText(0.05, 0.1, 0.95, 0.75)
big.text.SetTextAlign(12)
# error if shift is bigger than limit
limit = config.limit[mode]
for i in range(3):
if (big.unit!=""):
big.text.AddText("max. shift {0}: {1:.2} {2}".format(big.xyz[i], float(big.maxShift[i]), big.unit))
if (abs(big.maxShift[i]) > limit):
big.text.AddText("! {0} shift bigger than {1} {2}".format(big.xyz[i], limit, big.unit))
else:
big.text.AddText("max. shift {0}: {1:.2}".format(big.xyz[i], float(big.maxShift[i])))
if (abs(big.maxShift[i]) > limit):
big.text.AddText("! {0} shift bigger than {1}".format(big.xyz[i], limit))
# fill histograms with value and name
for line in MillePedeUser:
if (line.ObjId != 1):
for i in range(3):
if (abs(line.Par[big.data[i]]) != 999999):
# set name of the structure
big.histoAxis[i].SetBinLabel(
big.binPosition[i],
str(line.Name) if len(line.Name) <= 13 else str(line.Name)[:12]+".")
# fill with data, big.data[i] xyz or rot data
# transform xyz data from cm to #mu m
if (mode == "xyz"):
big.histo[i].SetBinContent(
big.binPosition[i], 10000 * line.Par[big.data[i]])
else:
big.histo[i].SetBinContent(
big.binPosition[i], line.Par[big.data[i]])
big.binPosition[i] += 1
# rotate labels
for i in range(3):
big.histoAxis[i].LabelsOption("v")
# reset y range
# two types of ranges
# 1. show all
if (config.rangemodeHL == "all"):
for i in range(3):
big.usedRange[i] = big.maxShift[i]
# 2. use given values
if (config.rangemodeHL == "given"):
# loop over coordinates
for i in range(3):
if (mode == "xyz"):
valuelist = config.rangexyzHL
if (mode == "rot"):
valuelist = config.rangerotHL
# loop over given values
# without last value
for value in valuelist:
# maximum smaller than given value
if (abs(big.maxShift[i]) < value):
big.usedRange[i] = value
break
# if not possible, force highest
if (abs(big.maxShift[i]) > valuelist[-1]):
big.usedRange[i] = valuelist[-1]
# all the same range
if (config.samerangeHL == 1):
# apply new range
for i in range(3):
big.usedRange[i] = max(map(abs, big.usedRange))
# count outlieres
if (config.rangemodeHL == "given"):
for i in range(3):
for binNumber in range(1, big.numberOfBins[i] + 1):
if (abs(big.histo[i].GetBinContent(binNumber)) > big.usedRange[i]):
big.hiddenEntries[i] += 1
# add number of outlieres to text
for i in range(3):
if (big.hiddenEntries[i] != 0):
big.text.AddText("! {0}: {1} outlier !".format(
big.xyz[i], int(big.hiddenEntries[i])))
# create canvas
cBig = ROOT.TCanvas("canvasBigStrucutres_{0}".format(
mode), "Parameter", 300, 0, 800, 600)
cBig.Divide(2, 2)
# draw histograms
cBig.cd(1)
big.title.Draw()
big.text.Draw()
# draw identification
ident = mpsv_style.identification(config)
ident.Draw()
# TGraph copy to hide outlier
copy = 3 * [None]
# loop over coordinates
for i in range(3):
cBig.cd(i + 2)
# option "AXIS" to only draw the axis
big.histo[i].SetLineColor(0)
big.histo[i].Draw("AXIS")
# set new range
big.histo[i].GetYaxis().SetRangeUser(-1.1 *
abs(big.usedRange[i]), 1.1 * abs(big.usedRange[i]))
# TGraph object to hide outlier
copy[i] = ROOT.TGraph(big.histo[i])
# set the new range
copy[i].SetMaximum(1.1 * abs(big.usedRange[i]))
copy[i].SetMinimum(-1.1 * abs(big.usedRange[i]))
# draw the data
copy[i].Draw("PSAME")
cBig.Update()
# save as pdf
cBig.Print(
"{0}/plots/pdf/structures_{1}.pdf".format(config.outputPath, mode))
# export as png
image = ROOT.TImage.Create()
image.FromPad(cBig)
image.WriteImage(
"{0}/plots/png/structures_{1}.png".format(config.outputPath, mode))
# add to output list
output = mpsv_classes.OutputData(plottype="big", parameter=mode,
filename="structures_{0}".format(mode))
config.outputList.append(output)
# reset BottomMargin
ROOT.gStyle.SetPadBottomMargin(0.1)
def plot(treeFile, alignables, config):
logger = logging.getLogger("mpsvalidate")
for mode in ["xyz", "rot"]:
time = mpsv_classes.PlotData(mode)
# list of all avaible TTrees
listMillePedeUser = []
MillePedeUser = []
for i in range(config.firsttree, 101):
if (treeFile.GetListOfKeys().Contains(
"MillePedeUser_{0}".format(i))):
listMillePedeUser.append(i)
# load MillePedeUser_X TTrees
for i in listMillePedeUser:
MillePedeUser.append(treeFile.Get("MillePedeUser_{0}".format(i)))
######################################################################
# remove TTrees without results
#
# check if there is a TTree without any results
# therefor search for the first alignable
first = 0
newlistMillePedeUser = []
# find first alignable
for line in MillePedeUser[0]:
if (line.ObjId != 1 and any(
abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
first = line.Id
newlistMillePedeUser.append(config.firsttree)
break
# check the following TTrees
for ttreeNumber, ttree in enumerate(MillePedeUser[1:]):
for line in ttree:
if (line.Id == first):
if (any(
abs(line.Par[time.data[i]]) != 999999
for i in [0, 1, 2])):
# note that the first tree was checked
newlistMillePedeUser.append(ttreeNumber +
config.firsttree + 1)
break
listMillePedeUser = newlistMillePedeUser
# reload MillePedeUser_X TTrees
MillePedeUser = []
for i in listMillePedeUser:
MillePedeUser.append(treeFile.Get("MillePedeUser_{0}".format(i)))
if not listMillePedeUser:
logger.error("Timeplots: no TTrees found")
return
if not MillePedeUser:
logger.error("Timeplots: no TTree could be opened")
return
######################################################################
# initialize data hierarchy
#
plots = []
# objids which were found in the TTree
objids = []
obj_names = []
# loop over first tree to initialize
for line in MillePedeUser[0]:
if (line.ObjId != 1 and any(
abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
plots.append(mpsv_classes.PlotData(mode))
# new objid?
if (line.ObjId not in objids):
objids.append(line.ObjId)
obj_names.append(str(line.Name))
# initialize histograms
for i in range(3):
plots[-1].histo.append(
ROOT.TH1F(
"Time Structure {0} {1} {2} {3}".format(
mode, str(line.Name), len(plots), i), "",
len(listMillePedeUser), 0, len(listMillePedeUser)))
plots[-1].label = line.Id
plots[-1].objid = line.ObjId
if (time.unit != ""):
plots[-1].histo[i].SetYTitle("#Delta" + time.xyz[i] +
" [" + time.unit + "]")
else:
plots[-1].histo[i].SetYTitle("#Delta" + time.xyz[i])
plots[-1].histo[i].SetXTitle("IOV")
plots[-1].histo[i].SetStats(0)
plots[-1].histo[i].SetMarkerStyle(21)
# bigger labels for the text
plots[-1].histo[i].GetXaxis().SetLabelSize(0.08)
plots[-1].histo[i].GetYaxis().SetTitleOffset(1.6)
######################################################################
# fill histogram
#
# loop over TTrees
for treeNumber, tree in enumerate(MillePedeUser):
for line in tree:
if (line.ObjId != 1 and any(
abs(line.Par[time.data[i]]) != 999999
for i in [0, 1, 2])):
# find the right plot
for plot in plots:
if (plot.label == line.Id):
for i in range(3):
# note that the first bin is referenced by 1
plot.histo[i].GetXaxis().SetBinLabel(
treeNumber + 1,
str(listMillePedeUser[treeNumber]))
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].SetBinContent(
treeNumber + 1,
10000 * line.Par[plot.data[i]])
else:
plot.histo[i].SetBinContent(
treeNumber + 1, line.Par[plot.data[i]])
######################################################################
# find maximum/minimum
#
maximum = [[0, 0, 0] for x in range(len(objids))]
minimum = [[0, 0, 0] for x in range(len(objids))]
for index, objid in enumerate(objids):
for plot in plots:
if (plot.objid == objid):
for i in range(3):
# maximum
if (plot.histo[i].GetMaximum() > maximum[index][i]):
maximum[index][i] = plot.histo[i].GetMaximum()
# minimum
if (plot.histo[i].GetMinimum() < minimum[index][i]):
minimum[index][i] = plot.histo[i].GetMinimum()
######################################################################
# make the plots
#
# loop over all objids
for index, objid in enumerate(objids):
canvas = ROOT.TCanvas(
"canvasTimeBigStrucutres_{0}_{1}".format(
mode, obj_names[index]), "Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
# add text
title = ROOT.TPaveLabel(
0.1, 0.8, 0.9, 0.9,
"{0} over time {1}".format(obj_names[index], mode))
legend = ROOT.TLegend(0.05, 0.1, 0.95, 0.75)
# draw on canvas
canvas.cd(1)
title.Draw()
# draw identification
ident = mpsv_style.identification(config)
ident.Draw()
# TGraph copies to hide outlier
copy = []
# reset y range of first plot
# two types of ranges
for i in range(3):
for plot in plots:
if (plot.objid == objid):
# 1. show all
if config.rangemodeHL == "all":
plot.usedRange[i] = max(abs(maximum[index][i]),
abs(minimum[index][i]))
# 2. use given values
if (config.rangemodeHL == "given"):
# loop over coordinates
if mode == "xyz":
valuelist = config.rangexyzHL
if mode == "rot":
valuelist = config.rangerotHL
# loop over given values
# without last value
for value in valuelist:
# maximum smaller than given value
if max(abs(maximum[index][i]),
abs(minimum[index][i])) < value:
plot.usedRange[i] = value
break
# if not possible, force highest
if (max(abs(maximum[index][i]),
abs(minimum[index][i])) > valuelist[-1]):
plot.usedRange[i] = valuelist[-1]
# draw plots on canvas
for i in range(3):
canvas.cd(2 + i)
number = 1
for plot in plots:
if (plot.objid == objid):
# all the same range
if (config.samerangeHL == 1):
plot.usedRange[i] = max(map(abs, plot.usedRange))
# set new range
plot.histo[i].GetYaxis().SetRangeUser(
-1.2 * abs(plot.usedRange[i]),
1.2 * abs(plot.usedRange[i]))
plot.histo[i].SetLineColorAlpha(number + 2, 0.5)
plot.histo[i].SetMarkerColorAlpha(number + 2, 1)
# option "AXIS" to only draw the axis
plot.histo[i].SetLineColor(0)
plot.histo[i].Draw("PSAME")
# TGraph object to hide outlier
copy.append(ROOT.TGraph(plot.histo[i]))
# set the new range
copy[-1].SetMaximum(1.2 * abs(plot.usedRange[i]))
copy[-1].SetMinimum(-1.2 * abs(plot.usedRange[i]))
# draw the data
copy[-1].SetLineColorAlpha(number + 2, 0.5)
copy[-1].Draw("LPSAME")
if (i == 0):
legend.AddEntry(plot.histo[i],
"{0}".format(number))
number += 1
canvas.cd(1)
legend.Draw()
canvas.Update()
# save as pdf
canvas.Print("{0}/plots/pdf/timeStructures_{1}_{2}.pdf".format(
config.outputPath, mode, obj_names[index]))
# export as png
image = ROOT.TImage.Create()
image.FromPad(canvas)
image.WriteImage("{0}/plots/png/timeStructures_{1}_{2}.png".format(
config.outputPath, mode, obj_names[index]))
# add to output list
output = mpsv_classes.OutputData(
plottype="time",
name=obj_names[index],
parameter=mode,
filename="timeStructures_{0}_{1}".format(
mode, obj_names[index]))
config.outputList.append(output)
def plot(MillePedeUser, alignables, mode, struct, parentPlot, config):
logger = logging.getLogger("mpsvalidate")
# skip empty
number = 0
for i in range(3):
if (parentPlot.histo[i].GetEntries() == 0):
number += 1
if (number == 3):
return
# number of bins to start
numberOfBins = 10000
######################################################################
# initialize data hierarchy
# plots[subStrucut]
#
plots = []
# initialize histograms
for subStructNumber, subStruct in enumerate(struct.get_children()):
plots.append(PlotData(mode))
# use a copy for shorter name
plot = plots[subStructNumber]
for i in range(3):
if (mode == "xyz"):
plot.histo.append(
TH1F(
"{0} {1} {2}".format(
struct.get_name() + " " + subStruct.get_name(),
plot.xyz[i], mode),
"Parameter {0}".format(plot.xyz[i]), numberOfBins,
-1000, 1000))
else:
plot.histo.append(
TH1F(
"{0} {1} {2}".format(
struct.get_name() + " " + subStruct.get_name(),
plot.xyz[i], mode),
"Parameter {0}".format(plot.xyz[i]), numberOfBins,
-0.1, 0.1))
plot.histo[i].SetXTitle(plot.unit)
plot.histo[i].SetLineColor(6)
plot.histo[i].SetStats(0)
# add labels
plot.title = TPaveLabel(
0.1, 0.8, 0.9, 0.9,
"Module: {0} {1}".format(struct.get_name(), mode))
plot.text = TPaveText(0.05, 0.1, 0.95, 0.75)
plot.text.SetTextAlign(12)
plot.text.SetTextSizePixels(20)
# save copy
plots[subStructNumber] = plot
######################################################################
# fill histogram
#
for line in MillePedeUser:
# is module ?
if (line.ObjId == 1):
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
# module in struct ?
if (subStruct.contains_detid(line.Id)):
for i in range(3):
if (abs(line.Par[plot.data[i]]) != 999999):
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].Fill(10000 *
line.Par[plot.data[i]])
else:
plot.histo[i].Fill(line.Par[plot.data[i]])
# save copy
plots[subStructNumber] = plot
######################################################################
# find the best range
#
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
for i in range(3):
if (plot.histo[i].GetEntries() != 0
and plot.histo[i].GetStdDev() != 0):
# use binShift of the hole structure
binShift = parentPlot.usedRange[i]
# count entries which are not shown anymore
# bin 1 to begin of histogram
for j in range(1, numberOfBins / 2 - binShift):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# from the end of shown bins to the end of histogram
for j in range(numberOfBins / 2 + binShift,
plot.histo[i].GetNbinsX()):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# merge bins, ca. 100 should be visible in the resulting plot
mergeNumberBins = binShift
# skip empty histogram
if (mergeNumberBins != 0):
# the 2*maxBinShift bins should shrink to 100 bins
mergeNumberBins = int(2. * mergeNumberBins /
config.numberofbins)
# the total number of bins should be dividable by the bins
# shrinked together
if (mergeNumberBins == 0):
mergeNumberBins = 1
while (numberOfBins % mergeNumberBins != 0
and mergeNumberBins != 1):
mergeNumberBins -= 1
# Rebin and save new created histogram and axis
plot.histo[i] = plot.histo[i].Rebin(mergeNumberBins)
# set view range. it is important to note that the number of bins have changed with the rebinning
# the total number and the number of shift must be
# corrected with / mergeNumberBins
plot.histo[i].GetXaxis().SetRange(
int(numberOfBins / (2 * mergeNumberBins) -
binShift / mergeNumberBins),
int(numberOfBins / (2 * mergeNumberBins) +
binShift / mergeNumberBins))
# save copy
plots[subStructNumber] = plot
######################################################################
# make the plots
#
canvas = TCanvas("SubStruct_{0}_{1}".format(struct.get_name(), mode),
"Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
canvas.cd(1)
parentPlot.title.Draw()
legend = TLegend(0.05, 0.1, 0.95, 0.75)
for i in range(3):
canvas.cd(i + 2)
# find y maximum
maximum = []
if (parentPlot.histo[i].GetEntries() == 0):
continue
# normalize parent
parentPlot.histo[i].Scale(1. / parentPlot.histo[i].Integral())
maximum.append(parentPlot.histo[i].GetMaximum())
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber]
if (plot.histo[i].GetEntries() > 0):
plot.histo[i].Scale(1. / plot.histo[i].Integral())
maximum.append(plot.histo[i].GetMaximum())
# save copy
plots[subStructNumber] = plot
# set range and plot
parentPlot.histo[i].GetYaxis().SetRangeUser(0., 1.1 * max(maximum))
parentPlot.histo[i].Draw()
for subStructNumber, subStruct in enumerate(struct.get_children()):
# use a copy for shorter name
plot = plots[subStructNumber].histo[i]
plot.SetLineColorAlpha(subStructNumber + 2, 0.5)
plot.Draw("same")
if (i == 0):
legend.AddEntry(plot, subStruct.get_name(), "l")
canvas.cd(1)
legend.Draw()
# draw identification
ident = identification(config)
ident.Draw()
canvas.Update()
# save as pdf
canvas.Print("{0}/plots/pdf/subModules_{1}_{2}.pdf".format(
config.outputPath, mode, struct.get_name()))
# export as png
image = TImage.Create()
image.FromPad(canvas)
image.WriteImage("{0}/plots/png/subModules_{1}_{2}.png".format(
config.outputPath, mode, struct.get_name()))
# add to output list
output = OutputData(plottype="subMod",
name=struct.get_name(),
number=subStructNumber + 1,
parameter=mode,
filename="subModules_{0}_{1}".format(
mode, struct.get_name()))
config.outputList.append(output)
def plot(MillePedeUser, alignables, config):
logger = logging.getLogger("mpsvalidate")
alignables.create_list(MillePedeUser)
# number of bins to start
numberOfBins = 10000
######################################################################
# initialize data hierarchy
# plots[mode][struct]
#
plots = []
# loop over mode
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
plots.append([])
# loop over structures
for structNumber, struct in enumerate(alignables.structures):
plots[modeNumber].append(mpsv_classes.PlotData(mode))
# initialize histograms
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
for i in range(3):
if (mode == "xyz"):
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name(), plot.xyz[
i], mode), "", numberOfBins, -1000, 1000))
else:
plot.histo.append(ROOT.TH1F("{0} {1} {2}".format(struct.get_name(), plot.xyz[
i], mode), "", numberOfBins, -0.1, 0.1))
if (plot.unit!=""):
plot.histo[i].SetXTitle("#Delta"+plot.xyz[i]+" ["+plot.unit+"]")
else:
plot.histo[i].SetXTitle("#Delta"+plot.xyz[i])
plot.histo[i].SetYTitle("number of alignables")
plot.histo[i].GetXaxis().SetTitleOffset(0.8)
plot.histoAxis.append(plot.histo[i].GetXaxis())
# add labels
plot.title = ROOT.TPaveLabel(
0.1, 0.8, 0.9, 0.9, "Module: {0} {1}".format(struct.get_name(), mode))
plot.text = ROOT.TPaveText(0.05, 0.1, 0.95, 0.75)
plot.text.SetTextAlign(12)
plot.text.SetTextSizePixels(20)
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# fill histogram
#
for line in MillePedeUser:
# is module ?
if (line.ObjId == 1):
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
# module in struct ?
if (struct.contains_detid(line.Id)):
for i in range(3):
if (abs(line.Par[plot.data[i]]) != 999999):
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].Fill(
10000 * line.Par[plot.data[i]])
else:
plot.histo[i].Fill(line.Par[plot.data[i]])
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# find the best range
#
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
for i in range(3):
# get first and last bin with content and chose the one which
# has a greater distance to the center
if (abs(numberOfBins / 2 - plot.histo[i].FindFirstBinAbove()) > abs(plot.histo[i].FindLastBinAbove() - numberOfBins / 2)):
plot.maxBinShift[i] = abs(
numberOfBins / 2 - plot.histo[i].FindFirstBinAbove())
# set the maxShift value
plot.maxShift[i] = plot.histo[i].GetBinCenter(
plot.histo[i].FindFirstBinAbove())
else:
plot.maxBinShift[i] = abs(
plot.histo[i].FindLastBinAbove() - numberOfBins / 2)
# set the maxShift value
plot.maxShift[i] = plot.histo[i].GetBinCenter(
plot.histo[i].FindLastBinAbove())
# skip empty histogram
if (abs(plot.maxBinShift[i]) == numberOfBins / 2 + 1):
plot.maxBinShift[i] = 0
# three types of ranges
# 1. multiple of standard dev
if (config.rangemode == "stddev"):
for i in range(3):
if (plot.histo[i].GetEntries() != 0 and plot.histo[i].GetStdDev() != 0):
# if the plotrange is much bigger than the standard
# deviation use config.widthstdev * StdDev als Range
if (max(plot.maxShift) / plot.histo[i].GetStdDev() > config.defpeak):
# corresponding bin config.widthstdev*StdDev
binShift = int(plot.histo[i].FindBin(
config.widthstddev * plot.histo[i].GetStdDev()) - numberOfBins / 2)
else:
binShift = max(plot.maxBinShift)
# save used binShift
plot.binShift[i] = binShift
# 2. show all
if (config.rangemode == "all"):
for i in range(3):
plot.binShift[i] = plot.maxBinShift[i]
# 3. use given ranges
if (config.rangemode == "given"):
for i in range(3):
if (mode == "xyz"):
valuelist = config.rangexyzM
if (mode == "rot"):
valuelist = config.rangerotM
if (mode == "dist"):
valuelist = config.rangedistM
for value in valuelist:
# maximum smaller than given value
if (abs(plot.maxShift[i]) < value):
binShift = value
break
# if not possible, force highest
if (abs(plot.maxShift[i]) > valuelist[-1]):
binShift = valuelist[-1]
# calculate binShift
plot.binShift[i] = int(
binShift / plot.histo[i].GetBinWidth(1))
# all plot the same range
if (config.samerange == 1):
for i in range(3):
plot.binShift[i] = max(plot.binShift)
# save used range
for i in range(3):
plot.usedRange[i] = plot.binShift[i]
# count entries which are not shown anymore
for i in range(3):
# bin 1 to begin of histogram
for j in range(1, numberOfBins / 2 - plot.binShift[i]):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# from the end of shown bins to the end of histogram
for j in range(numberOfBins / 2 + plot.binShift[i], plot.histo[i].GetNbinsX()):
plot.hiddenEntries[i] += plot.histo[i].GetBinContent(j)
# apply new range
for i in range(3):
if (plot.histo[i].GetEntries() != 0):
# merge bins, ca. 100 should be visible in the resulting
# plot
mergeNumberBins = plot.binShift[i]
# skip empty histogram
if (mergeNumberBins != 0):
# the 2*maxBinShift bins should shrink to 100 bins
mergeNumberBins = int(
2. * mergeNumberBins / config.numberofbins)
# the total number of bins should be dividable by the
# bins shrinked together
if (mergeNumberBins == 0):
mergeNumberBins = 1
while (numberOfBins % mergeNumberBins != 0 and mergeNumberBins != 1):
mergeNumberBins -= 1
# Rebin and save new created histogram and axis
plot.histo[i] = plot.histo[i].Rebin(mergeNumberBins)
plot.histoAxis[i] = plot.histo[i].GetXaxis()
# set view range. it is important to note that the number of bins have changed with the rebinning
# the total number and the number of shift must be
# corrected with / mergeNumberBins
plot.histoAxis[i].SetRange(int(numberOfBins / (2 * mergeNumberBins) - plot.binShift[
i] / mergeNumberBins), int(numberOfBins / (2 * mergeNumberBins) + plot.binShift[i] / mergeNumberBins))
# error if shift is bigger than limit
limit = config.limit[mode]
for i in range(3):
# skip empty
if (plot.histo[i].GetEntries() > 0):
if (plot.unit!=""):
plot.text.AddText("max. shift {0}: {1:.2} {2}".format(plot.xyz[i], plot.maxShift[i], plot.unit))
if (abs(plot.maxShift[i]) > limit):
plot.text.AddText("! {0} shift bigger than {1} {2}".format(plot.xyz[i], limit, plot.unit))
else:
plot.text.AddText("max. shift {0}: {1:.2}".format(plot.xyz[i], plot.maxShift[i]))
if (abs(plot.maxShift[i]) > limit):
plot.text.AddText("! {0} shift bigger than {1}".format(plot.xyz[i], limit))
if (plot.hiddenEntries[i] != 0):
plot.text.AddText("! {0}: {1} outlier !".format(
plot.xyz[i], int(plot.hiddenEntries[i])))
# save copy
plots[modeNumber][structNumber] = plot
######################################################################
# make the plots
#
# show the skewness in the legend
ROOT.gStyle.SetOptStat("emrs")
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
canvas = ROOT.TCanvas("canvasModules{0}_{1}".format(
struct.get_name(), mode), "Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
canvas.cd(1)
plot.title.Draw()
plot.text.Draw()
# draw identification
ident = mpsv_style.identification(config)
ident.Draw()
# is there any plot?
plotNumber = 0
# loop over coordinates
for i in range(3):
if(plot.histo[i].GetEntries() > 0):
plotNumber += 1
canvas.cd(i + 2)
mpsv_style.setstatsize(canvas, plot.histo[i], config)
plot.histo[i].DrawCopy()
if (plotNumber == 0):
break
canvas.Update()
# save as pdf
canvas.Print(
"{0}/plots/pdf/modules_{1}_{2}.pdf".format(config.outputPath, mode, struct.get_name()))
# export as png
image = ROOT.TImage.Create()
image.FromPad(canvas)
image.WriteImage(
"{0}/plots/png/modules_{1}_{2}.png".format(config.outputPath, mode, struct.get_name()))
# add to output list
output = mpsv_classes.OutputData(plottype="mod", name=struct.get_name(),
parameter=mode, filename="modules_{0}_{1}".format(mode, struct.get_name()))
config.outputList.append(output)
######################################################################
# make plots with substructure
#
if config.showsubmodule:
alignables.create_children_list()
for modeNumber, mode in enumerate(["xyz", "rot", "dist"]):
for structNumber, struct in enumerate(alignables.structures):
# use a copy for shorter name
plot = plots[modeNumber][structNumber]
mpsv_subModule.plot(MillePedeUser, alignables,
mode, struct, plot, config)
def plot(treeFile, alignables, config):
logger = logging.getLogger("mpsvalidate")
for mode in ["xyz", "rot"]:
time = PlotData(mode)
# list of all avaible TTrees
listMillePedeUser = []
MillePedeUser = []
for i in range(config.firsttree, 101):
if (treeFile.GetListOfKeys().Contains("MillePedeUser_{0}".format(i))):
listMillePedeUser.append(i)
# load MillePedeUser_X TTrees
for i in listMillePedeUser:
MillePedeUser.append(treeFile.Get("MillePedeUser_{0}".format(i)))
######################################################################
# remove TTrees without results
#
# check if there is a TTree without any results
# therefor search for the first alignable
first = 0
newlistMillePedeUser = []
# find first alignable
for line in MillePedeUser[0]:
if (line.ObjId != 1 and any(abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
first = line.Id
newlistMillePedeUser.append(config.firsttree)
break
# check the following TTrees
for ttreeNumber, ttree in enumerate(MillePedeUser[1:]):
for line in ttree:
if (line.Id == first):
if (any(abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
# note that the first tree was checked
newlistMillePedeUser.append(
ttreeNumber + config.firsttree + 1)
break
listMillePedeUser = newlistMillePedeUser
# reload MillePedeUser_X TTrees
MillePedeUser = []
for i in listMillePedeUser:
MillePedeUser.append(treeFile.Get("MillePedeUser_{0}".format(i)))
if not listMillePedeUser:
logger.error("Timeplots: no TTrees found")
return
if not MillePedeUser:
logger.error("Timeplots: no TTree could be opened")
return
######################################################################
# initialize data hierarchy
#
plots = []
# objids which were found in the TTree
objids = []
# loop over first tree to initialize
for line in MillePedeUser[0]:
if (line.ObjId != 1 and any(abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
plots.append(PlotData(mode))
# new objid?
if (line.ObjId not in objids):
objids.append(line.ObjId)
# initialize histograms
for i in range(3):
plots[-1].histo.append(TH1F("Time Structure {0} {1} {2} {3}".format(mode, alignables.get_name_by_objid(
line.ObjId), len(plots), i), "Parameter {0}".format(time.xyz[i]), len(listMillePedeUser), 0, len(listMillePedeUser)))
plots[-1].label = line.Id
plots[-1].objid = line.ObjId
plots[-1].histo[i].SetYTitle(time.unit)
plots[-1].histo[i].SetStats(0)
plots[-1].histo[i].SetMarkerStyle(21)
# bigger labels for the text
plots[-1].histo[i].GetXaxis().SetLabelSize(0.06)
plots[-1].histo[i].GetYaxis().SetTitleOffset(1.6)
######################################################################
# fill histogram
#
# loop over TTrees
for treeNumber, tree in enumerate(MillePedeUser):
for line in tree:
if (line.ObjId != 1 and any(abs(line.Par[time.data[i]]) != 999999 for i in [0, 1, 2])):
# find the right plot
for plot in plots:
if (plot.label == line.Id):
for i in range(3):
# note that the first bin is referenced by 1
plot.histo[i].GetXaxis().SetBinLabel(
treeNumber + 1, str(listMillePedeUser[treeNumber]))
# transform xyz data from cm to #mu m
if (mode == "xyz"):
plot.histo[i].SetBinContent(
treeNumber + 1, 10000 * line.Par[plot.data[i]])
else:
plot.histo[i].SetBinContent(
treeNumber + 1, line.Par[plot.data[i]])
######################################################################
# find maximum/minimum
#
maximum = [[0, 0, 0] for x in range(len(objids))]
minimum = [[0, 0, 0] for x in range(len(objids))]
for index, objid in enumerate(objids):
for plot in plots:
if (plot.objid == objid):
for i in range(3):
# maximum
if (plot.histo[i].GetMaximum() > maximum[index][i]):
maximum[index][i] = plot.histo[i].GetMaximum()
# minimum
if (plot.histo[i].GetMinimum() < minimum[index][i]):
minimum[index][i] = plot.histo[i].GetMinimum()
######################################################################
# make the plots
#
# loop over all objids
for index, objid in enumerate(objids):
canvas = TCanvas("canvasTimeBigStrucutres_{0}_{1}".format(
mode, alignables.get_name_by_objid(objid)), "Parameter", 300, 0, 800, 600)
canvas.Divide(2, 2)
# add text
title = TPaveLabel(0.1, 0.8, 0.9, 0.9, "{0} over time {1}".format(
alignables.get_name_by_objid(objid), mode))
legend = TLegend(0.05, 0.1, 0.95, 0.75)
# draw on canvas
canvas.cd(1)
title.Draw()
# draw identification
ident = identification(config)
ident.Draw()
# TGraph copies to hide outlier
copy = []
# reset y range of first plot
# two types of ranges
for i in range(3):
for plot in plots:
if (plot.objid == objid):
# 1. show all
if (config.rangemodeHL == "all"):
plot.usedRange[i] = max(
abs(maximum[index][i]), abs(minimum[index][i]))
# 2. use given values
if (config.rangemodeHL == "given"):
# loop over coordinates
if (mode == "xyz"):
valuelist = config.rangexyzHL
if (mode == "rot"):
valuelist = config.rangerotHL
# loop over given values
# without last value
for value in valuelist:
# maximum smaller than given value
if (max(abs(maximum[index][i]), abs(minimum[index][i])) < value):
plot.usedRange[i] = value
break
# if not possible, force highest
if (max(abs(maximum[index][i]), abs(minimum[index][i])) > valuelist[-1]):
plot.usedRange[i] = valuelist[-1]
# draw plots on canvas
for i in range(3):
canvas.cd(2 + i)
number = 1
for plot in plots:
if (plot.objid == objid):
# all the same range
if (config.samerangeHL == 1):
plot.usedRange[i] = max(map(abs, plot.usedRange))
# set new range
plot.histo[i].GetYaxis(
).SetRangeUser(-1.2 * abs(plot.usedRange[i]), 1.2 * abs(plot.usedRange[i]))
plot.histo[i].SetLineColorAlpha(number + 2, 0.5)
plot.histo[i].SetMarkerColorAlpha(number + 2, 1)
# option "AXIS" to only draw the axis
plot.histo[i].SetLineColor(0)
plot.histo[i].Draw("SAME")
# TGraph object to hide outlier
copy.append(TGraph(plot.histo[i]))
# set the new range
copy[-1].SetMaximum(1.2 * abs(plot.usedRange[i]))
copy[-1].SetMinimum(-1.2 * abs(plot.usedRange[i]))
# draw the data
copy[-1].Draw("LPSAME")
if (i == 0):
legend.AddEntry(
plot.histo[i], "{0}".format(number))
number += 1
canvas.cd(1)
legend.Draw()
canvas.Update()
# save as pdf
canvas.Print("{0}/plots/pdf/timeStructures_{1}_{2}.pdf".format(
config.outputPath, mode, alignables.get_name_by_objid(objid)))
# export as png
image = TImage.Create()
image.FromPad(canvas)
image.WriteImage("{0}/plots/png/timeStructures_{1}_{2}.png".format(
config.outputPath, mode, alignables.get_name_by_objid(objid)))
# add to output list
output = OutputData(plottype="time", name=alignables.get_name_by_objid(
objid), parameter=mode, filename="timeStructures_{0}_{1}".format(mode, alignables.get_name_by_objid(objid)))
config.outputList.append(output)
def plot(MillePedeUser, alignables, config):
logger = logging.getLogger("mpsvalidate")
# more space for labels
gStyle.SetPadBottomMargin(0.25)
gStyle.SetOptStat("emrs")
for mode in ["xyz", "rot"]:
big = PlotData(mode)
# count number of needed bins and max shift
for line in MillePedeUser:
if (line.ObjId != 1):
for i in range(3):
if (abs(line.Par[big.data[i]]) != 999999):
if (mode == "xyz"):
line.Par[big.data[i]] *= 10000
big.numberOfBins[i] += 1
if (abs(line.Par[big.data[i]]) > abs(big.maxShift[i])):
big.maxShift[i] = line.Par[big.data[i]]
# initialize histograms
for i in range(3):
big.histo.append(
TH1F("Big Structure {0} {1}".format(big.xyz[i], mode), "",
big.numberOfBins[i], 0, big.numberOfBins[i]))
if (big.unit != ""):
big.histo[i].SetYTitle("#Delta" + big.xyz[i] + " [" +
big.unit + "]")
else:
big.histo[i].SetYTitle("#Delta" + big.xyz[i])
big.histo[i].SetStats(0)
big.histo[i].SetMarkerStyle(21)
big.histoAxis.append(big.histo[i].GetXaxis())
# bigger labels for the text
big.histoAxis[i].SetLabelSize(0.06)
big.histo[i].GetYaxis().SetTitleOffset(1.6)
# add labels
big.title = TPaveLabel(0.1, 0.8, 0.9, 0.9,
"High Level Structures {0}".format(mode))
big.text = TPaveText(0.05, 0.1, 0.95, 0.75)
big.text.SetTextAlign(12)
# error if shift is bigger than limit
limit = config.limit[mode]
for i in range(3):
if (big.unit != ""):
big.text.AddText("max. shift {0}: {1:.2} {2}".format(
big.xyz[i], float(big.maxShift[i]), big.unit))
if (abs(big.maxShift[i]) > limit):
big.text.AddText("! {0} shift bigger than {1} {2}".format(
big.xyz[i], limit, big.unit))
else:
big.text.AddText("max. shift {0}: {1:.2}".format(
big.xyz[i], float(big.maxShift[i])))
if (abs(big.maxShift[i]) > limit):
big.text.AddText("! {0} shift bigger than {1}".format(
big.xyz[i], limit))
# fill histograms with value and name
for line in MillePedeUser:
if (line.ObjId != 1):
for i in range(3):
if (abs(line.Par[big.data[i]]) != 999999):
# set name of the structure
big.histoAxis[i].SetBinLabel(
big.binPosition[i],
alignables.get_name_by_objid(line.ObjId))
# fill with data, big.data[i] xyz or rot data
# transform xyz data from cm to #mu m
if (mode == "xyz"):
big.histo[i].SetBinContent(
big.binPosition[i],
10000 * line.Par[big.data[i]])
else:
big.histo[i].SetBinContent(big.binPosition[i],
line.Par[big.data[i]])
big.binPosition[i] += 1
# rotate labels
for i in range(3):
big.histoAxis[i].LabelsOption("v")
# reset y range
# two types of ranges
# 1. show all
if (config.rangemodeHL == "all"):
for i in range(3):
big.usedRange[i] = big.maxShift[i]
# 2. use given values
if (config.rangemodeHL == "given"):
# loop over coordinates
for i in range(3):
if (mode == "xyz"):
valuelist = config.rangexyzHL
if (mode == "rot"):
valuelist = config.rangerotHL
# loop over given values
# without last value
for value in valuelist:
# maximum smaller than given value
if (abs(big.maxShift[i]) < value):
big.usedRange[i] = value
break
# if not possible, force highest
if (abs(big.maxShift[i]) > valuelist[-1]):
big.usedRange[i] = valuelist[-1]
# all the same range
if (config.samerangeHL == 1):
# apply new range
for i in range(3):
big.usedRange[i] = max(map(abs, big.usedRange))
# count outlieres
if (config.rangemodeHL == "given"):
for i in range(3):
for binNumber in range(1, big.numberOfBins[i] + 1):
if (abs(big.histo[i].GetBinContent(binNumber)) >
big.usedRange[i]):
big.hiddenEntries[i] += 1
# add number of outlieres to text
for i in range(3):
if (big.hiddenEntries[i] != 0):
big.text.AddText("! {0}: {1} outlier !".format(
big.xyz[i], int(big.hiddenEntries[i])))
# create canvas
cBig = TCanvas("canvasBigStrucutres_{0}".format(mode), "Parameter",
300, 0, 800, 600)
cBig.Divide(2, 2)
# draw histograms
cBig.cd(1)
big.title.Draw()
big.text.Draw()
# draw identification
ident = identification(config)
ident.Draw()
# TGraph copy to hide outlier
copy = 3 * [None]
# loop over coordinates
for i in range(3):
cBig.cd(i + 2)
# option "AXIS" to only draw the axis
big.histo[i].SetLineColor(0)
big.histo[i].Draw("AXIS")
# set new range
big.histo[i].GetYaxis().SetRangeUser(-1.1 * abs(big.usedRange[i]),
1.1 * abs(big.usedRange[i]))
# TGraph object to hide outlier
copy[i] = TGraph(big.histo[i])
# set the new range
copy[i].SetMaximum(1.1 * abs(big.usedRange[i]))
copy[i].SetMinimum(-1.1 * abs(big.usedRange[i]))
# draw the data
copy[i].Draw("PSAME")
cBig.Update()
# save as pdf
cBig.Print("{0}/plots/pdf/structures_{1}.pdf".format(
config.outputPath, mode))
# export as png
image = TImage.Create()
image.FromPad(cBig)
image.WriteImage("{0}/plots/png/structures_{1}.png".format(
config.outputPath, mode))
# add to output list
output = OutputData(plottype="big",
parameter=mode,
filename="structures_{0}".format(mode))
config.outputList.append(output)
# reset BottomMargin
gStyle.SetPadBottomMargin(0.1)
