def thermald_thread():
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
charging_disabled = False
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
ts_last_ip = 0
ip_addr = '255.255.255.255'
# sound trigger
sound_trigger = 1
opkrAutoShutdown = 0
shutdown_trigger = 1
is_openpilot_view_enabled = 0
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = Params().get('OpkrEnableGetoffAlert') == b'1'
if int(params.get('OpkrAutoShutdown')) == 0:
opkrAutoShutdown = 0
elif int(params.get('OpkrAutoShutdown')) == 1:
opkrAutoShutdown = 5
elif int(params.get('OpkrAutoShutdown')) == 2:
opkrAutoShutdown = 30
elif int(params.get('OpkrAutoShutdown')) == 3:
opkrAutoShutdown = 60
elif int(params.get('OpkrAutoShutdown')) == 4:
opkrAutoShutdown = 180
elif int(params.get('OpkrAutoShutdown')) == 5:
opkrAutoShutdown = 300
elif int(params.get('OpkrAutoShutdown')) == 6:
opkrAutoShutdown = 600
elif int(params.get('OpkrAutoShutdown')) == 7:
opkrAutoShutdown = 1800
elif int(params.get('OpkrAutoShutdown')) == 8:
opkrAutoShutdown = 3600
elif int(params.get('OpkrAutoShutdown')) == 9:
opkrAutoShutdown = 10800
else:
opkrAutoShutdown = 18000
lateral_control_method = int(params.get("LateralControlMethod"))
lateral_control_method_prev = int(params.get("LateralControlMethod"))
lateral_control_method_cnt = 0
lateral_control_method_trigger = 0
while 1:
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
lateral_control_method = int(params.get("LateralControlMethod"))
if lateral_control_method != lateral_control_method_prev and lateral_control_method_trigger == 0:
startup_conditions["ignition"] = False
lateral_control_method_trigger = 1
elif lateral_control_method != lateral_control_method_prev:
lateral_control_method_cnt += 1
if lateral_control_method_cnt > 1 / DT_TRML:
lateral_control_method_prev = lateral_control_method
elif health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
shutdown_trigger = 1
else:
no_panda_cnt = 0
startup_conditions["ignition"] = health.health.ignitionLine or health.health.ignitionCan
sound_trigger == 1
lateral_control_method_cnt = 0
lateral_control_method_trigger = 0
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif int(params.get("IsOpenpilotViewEnabled")) == 1 and int(params.get("IsDriverViewEnabled")) == 0 and is_openpilot_view_enabled == 0:
is_openpilot_view_enabled = 1
startup_conditions["ignition"] = True
elif int(params.get("IsOpenpilotViewEnabled")) == 0 and int(params.get("IsDriverViewEnabled")) == 0 and is_openpilot_view_enabled == 1:
shutdown_trigger = 0
sound_trigger == 0
is_openpilot_view_enabled = 0
startup_conditions["ignition"] = False
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
# update ip every 10 seconds
ts = sec_since_boot()
if ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem, max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = now.year >= True
set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
# Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
#
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# last_update_exception = params.get("LastUpdateException", encoding='utf8')
#
# if update_failed_count > 15 and last_update_exception is not None:
# if current_branch in ["release2", "dashcam"]:
# extra_text = "Ensure the software is correctly installed"
# else:
# extra_text = last_update_exception
#
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
# elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
# else:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
startup_conditions["not_uninstalling"] = not params.get("DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed("Offroad_PandaFirmwareMismatch", (not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get("IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get("IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not startup_conditions["device_temp_good"]))
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if startup_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
if shutdown_trigger == 1 and sound_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and started_seen and (sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([mediaplayer + 'mediaplayer', '/data/openpilot/selfdrive/assets/sounds/eondetach.wav'], shell = False, stdin=None, stdout=None, stderr=None, env = env, close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if shutdown_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and \
started_seen and opkrAutoShutdown and (sec_since_boot() - off_ts) > opkrAutoShutdown and not os.path.isfile(pandaflash_ongoing):
os.system('LD_LIBRARY_PATH="" svc power shutdown')
charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg)
if msg.thermal.batteryCurrent > 0:
msg.thermal.batteryStatus = "Discharging"
else:
msg.thermal.batteryStatus = "Charging"
msg.thermal.chargingDisabled = charging_disabled
prebuiltlet = Params().get('PutPrebuiltOn') == b'1'
if not os.path.isfile(prebuiltfile) and prebuiltlet:
os.system("cd /data/openpilot; touch prebuilt")
elif os.path.isfile(prebuiltfile) and not prebuiltlet:
os.system("cd /data/openpilot; rm -f prebuilt")
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.carBatteryCapacity = max(0, pm.get_car_battery_capacity())
# # Check if we need to disable charging (handled by boardd)
# msg.thermal.chargingDisabled = pm.should_disable_charging(health, off_ts)
#
# # Check if we need to shut down
# if pm.should_shutdown(health, off_ts, started_seen, LEON):
# cloudlog.info(f"shutting device down, offroad since {off_ts}")
# # TODO: add function for blocking cloudlog instead of sleep
# time.sleep(10)
# os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaState',
timeout=pandaState_timeout)
location_sock = messaging.sub_sock('gpsLocationExternal')
managerState_sock = messaging.sub_sock('managerState', conflate=True)
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
charging_disabled = False #CHO: Add battery management
pandaState_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
#ui_running_prev = False
ui_running_prev = True #CHO: Add battery management
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
thermal_config = HARDWARE.get_thermal_config()
# CPR3 logging
if EON:
base_path = "/sys/kernel/debug/cpr3-regulator/"
cpr_files = [p for p in Path(base_path).glob("**/*") if p.is_file()]
cpr_data = {}
for cf in cpr_files:
with open(cf, "r") as f:
try:
cpr_data[str(cf)] = f.read().strip()
except Exception:
pass
cloudlog.event("CPR", data=cpr_data)
while 1:
pandaState = messaging.recv_sock(pandaState_sock, wait=True)
msg = read_thermal(thermal_config)
if pandaState is not None:
usb_power = pandaState.pandaState.usbPowerMode != log.PandaState.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = pandaState.pandaState.ignitionLine or pandaState.pandaState.ignitionCan
startup_conditions["hardware_supported"] = True
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported",
not startup_conditions["hardware_supported"])
# Setup fan handler on first connect to panda
if handle_fan is None and pandaState.pandaState.pandaType != log.PandaState.PandaType.unknown:
is_uno = pandaState.pandaState.pandaType == log.PandaState.PandaType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaState.pandaType != log.PandaState.PandaType.unknown:
params.panda_disconnect()
pandaState_prev = pandaState
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = int(round(psutil.cpu_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryStatus = HARDWARE.get_battery_status()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.batteryVoltage = HARDWARE.get_battery_voltage()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.deviceState.batteryPercent = 100
msg.deviceState.batteryStatus = "Charging"
msg.deviceState.batteryTempC = 0
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.deviceState.cpuTempC))
max_comp_temp = max(max_cpu_temp, msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC))
bat_temp = msg.deviceState.batteryTempC
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed,
startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
thermal_status = ThermalStatus.green # default to good condition
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get(
"DisableUpdates") == b"1"
startup_conditions["not_uninstalling"] = not params.get(
"DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get(
"IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get(
"IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
if TICI and DISABLE_LTE_ONROAD:
os.system("sudo systemctl stop --no-block lte")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
if TICI and DISABLE_LTE_ONROAD:
os.system("sudo systemctl start --no-block lte")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
#CHO: Added battery management
charging_disabled = check_car_battery_voltage(should_start, pandaState,
charging_disabled, msg)
if msg.deviceState.batteryCurrent > 0:
msg.deviceState.batteryStatus = "Discharging"
else:
msg.deviceState.batteryStatus = "Charging"
msg.deviceState.chargingDisabled = charging_disabled
#CHO: END
# Offroad power monitoring
power_monitor.calculate(pandaState)
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
pandaState, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(pandaState, off_ts, started_seen):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
manager_state = messaging.recv_one_or_none(managerState_sock)
if manager_state is not None:
ui_running = "ui" in (p.name
for p in manager_state.managerState.processes
if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled",
(not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
location = messaging.recv_sock(location_sock)
cloudlog.event("STATUS_PACKET",
count=count,
pandaState=(strip_deprecated_keys(
pandaState.to_dict()) if pandaState else None),
location=(strip_deprecated_keys(
location.gpsLocationExternal.to_dict())
if location else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def ui_thread(addr, frame_address):
# TODO: Detect car from replay and use that to select carparams
CP = ToyotaInterface.get_params("TOYOTA PRIUS 2017")
VM = VehicleModel(CP)
CalP = np.asarray([[0, 0], [MODEL_INPUT_SIZE[0], 0], [MODEL_INPUT_SIZE[0], MODEL_INPUT_SIZE[1]], [0, MODEL_INPUT_SIZE[1]]])
vanishing_point = np.asarray([[MODEL_CX, MODEL_CY]])
pygame.init()
pygame.font.init()
assert pygame_modules_have_loaded()
if HOR:
size = (640+384+640, 960)
write_x = 5
write_y = 680
else:
size = (640+384, 960+300)
write_x = 645
write_y = 970
pygame.display.set_caption("openpilot debug UI")
screen = pygame.display.set_mode(size, pygame.DOUBLEBUF)
alert1_font = pygame.font.SysFont("arial", 30)
alert2_font = pygame.font.SysFont("arial", 20)
info_font = pygame.font.SysFont("arial", 15)
camera_surface = pygame.surface.Surface((640, 480), 0, 24).convert()
cameraw_surface = pygame.surface.Surface(MODEL_INPUT_SIZE, 0, 24).convert()
cameraw_test_surface = pygame.surface.Surface(MODEL_INPUT_SIZE, 0, 24)
top_down_surface = pygame.surface.Surface((UP.lidar_x, UP.lidar_y),0,8)
frame = messaging.sub_sock('frame', addr=addr, conflate=True)
sm = messaging.SubMaster(['carState', 'plan', 'carControl', 'radarState', 'liveCalibration', 'controlsState', 'liveTracks', 'model', 'liveMpc', 'liveParameters', 'pathPlan'], addr=addr)
calibration = None
img = np.zeros((480, 640, 3), dtype='uint8')
imgff = np.zeros((FULL_FRAME_SIZE[1], FULL_FRAME_SIZE[0], 3), dtype=np.uint8)
imgw = np.zeros((160, 320, 3), dtype=np.uint8) # warped image
lid_overlay_blank = get_blank_lid_overlay(UP)
# plots
name_to_arr_idx = { "gas": 0,
"computer_gas": 1,
"user_brake": 2,
"computer_brake": 3,
"v_ego": 4,
"v_pid": 5,
"angle_steers_des": 6,
"angle_steers": 7,
"angle_steers_k": 8,
"steer_torque": 9,
"v_override": 10,
"v_cruise": 11,
"a_ego": 12,
"a_target": 13,
"accel_override": 14}
plot_arr = np.zeros((100, len(name_to_arr_idx.values())))
plot_xlims = [(0, plot_arr.shape[0]), (0, plot_arr.shape[0]), (0, plot_arr.shape[0]), (0, plot_arr.shape[0])]
plot_ylims = [(-0.1, 1.1), (-ANGLE_SCALE, ANGLE_SCALE), (0., 75.), (-3.0, 2.0)]
plot_names = [["gas", "computer_gas", "user_brake", "computer_brake", "accel_override"],
["angle_steers", "angle_steers_des", "angle_steers_k", "steer_torque"],
["v_ego", "v_override", "v_pid", "v_cruise"],
["a_ego", "a_target"]]
plot_colors = [["b", "b", "g", "r", "y"],
["b", "g", "y", "r"],
["b", "g", "r", "y"],
["b", "r"]]
plot_styles = [["-", "-", "-", "-", "-"],
["-", "-", "-", "-"],
["-", "-", "-", "-"],
["-", "-"]]
draw_plots = init_plots(plot_arr, name_to_arr_idx, plot_xlims, plot_ylims, plot_names, plot_colors, plot_styles, bigplots=True)
counter = 0
while 1:
list(pygame.event.get())
screen.fill((64,64,64))
lid_overlay = lid_overlay_blank.copy()
top_down = top_down_surface, lid_overlay
# ***** frame *****
fpkt = messaging.recv_one(frame)
rgb_img_raw = fpkt.frame.image
if fpkt.frame.transform:
img_transform = np.array(fpkt.frame.transform).reshape(3,3)
else:
# assume frame is flipped
img_transform = np.array([
[-1.0, 0.0, FULL_FRAME_SIZE[0]-1],
[ 0.0, -1.0, FULL_FRAME_SIZE[1]-1],
[ 0.0, 0.0, 1.0]
])
if rgb_img_raw and len(rgb_img_raw) == FULL_FRAME_SIZE[0] * FULL_FRAME_SIZE[1] * 3:
imgff = np.frombuffer(rgb_img_raw, dtype=np.uint8).reshape((FULL_FRAME_SIZE[1], FULL_FRAME_SIZE[0], 3))
imgff = imgff[:, :, ::-1] # Convert BGR to RGB
cv2.warpAffine(imgff, np.dot(img_transform, _BB_TO_FULL_FRAME)[:2],
(img.shape[1], img.shape[0]), dst=img, flags=cv2.WARP_INVERSE_MAP)
intrinsic_matrix = eon_intrinsics
else:
img.fill(0)
intrinsic_matrix = np.eye(3)
if calibration is not None:
transform = np.dot(img_transform, calibration.model_to_full_frame)
imgw = cv2.warpAffine(imgff, transform[:2], (MODEL_INPUT_SIZE[0], MODEL_INPUT_SIZE[1]), flags=cv2.WARP_INVERSE_MAP)
else:
imgw.fill(0)
sm.update()
w = sm['controlsState'].lateralControlState.which()
if w == 'lqrState':
angle_steers_k = sm['controlsState'].lateralControlState.lqrState.steerAngle
elif w == 'indiState':
angle_steers_k = sm['controlsState'].lateralControlState.indiState.steerAngle
else:
angle_steers_k = np.inf
plot_arr[:-1] = plot_arr[1:]
plot_arr[-1, name_to_arr_idx['angle_steers']] = sm['controlsState'].angleSteers
plot_arr[-1, name_to_arr_idx['angle_steers_des']] = sm['carControl'].actuators.steerAngle
plot_arr[-1, name_to_arr_idx['angle_steers_k']] = angle_steers_k
plot_arr[-1, name_to_arr_idx['gas']] = sm['carState'].gas
plot_arr[-1, name_to_arr_idx['computer_gas']] = sm['carControl'].actuators.gas
plot_arr[-1, name_to_arr_idx['user_brake']] = sm['carState'].brake
plot_arr[-1, name_to_arr_idx['steer_torque']] = sm['carControl'].actuators.steer * ANGLE_SCALE
plot_arr[-1, name_to_arr_idx['computer_brake']] = sm['carControl'].actuators.brake
plot_arr[-1, name_to_arr_idx['v_ego']] = sm['controlsState'].vEgo
plot_arr[-1, name_to_arr_idx['v_pid']] = sm['controlsState'].vPid
plot_arr[-1, name_to_arr_idx['v_override']] = sm['carControl'].cruiseControl.speedOverride
plot_arr[-1, name_to_arr_idx['v_cruise']] = sm['carState'].cruiseState.speed
plot_arr[-1, name_to_arr_idx['a_ego']] = sm['carState'].aEgo
plot_arr[-1, name_to_arr_idx['a_target']] = sm['plan'].aTarget
plot_arr[-1, name_to_arr_idx['accel_override']] = sm['carControl'].cruiseControl.accelOverride
# ***** model ****
# if len(sm['model'].path.poly) > 0:
model_data = extract_model_data(sm['model'])
imgw_copy = copy.deepcopy(imgw)
paths = plot_model(model_data, VM, sm['controlsState'].vEgo, sm['controlsState'].curvature, imgw, calibration,
top_down, np.array(sm['pathPlan'].dPoly))
# interlock code HERE
if calibration:
left_fit = np.polyfit(_PATH_XD, model_data.lpath.y,2)
right_fit = np.polyfit(_PATH_XD, model_data.rpath.y,2)
imgw_copy = cv2.resize(imgw_copy, (int(imgw_copy.shape[1] * SCALE), int(imgw_copy.shape[0] * SCALE)))
interlock(imgw_copy, left_fit, right_fit, calibration.car_to_model, REG_THRESHOLDS)
# MPC
if sm.updated['liveMpc']:
draw_mpc(sm['liveMpc'], top_down)
# draw all radar points
maybe_update_radar_points(sm['liveTracks'], top_down[1])
if sm.updated['liveCalibration']:
extrinsic_matrix = np.asarray(sm['liveCalibration'].extrinsicMatrix).reshape(3, 4)
ke = intrinsic_matrix.dot(extrinsic_matrix)
warp_matrix = get_camera_frame_from_model_frame(ke)
calibration = CalibrationTransformsForWarpMatrix(warp_matrix, intrinsic_matrix, extrinsic_matrix)
# draw red pt for lead car in the main img
for lead in [sm['radarState'].leadOne, sm['radarState'].leadTwo]:
if lead.status:
if calibration is not None:
draw_lead_on(img, lead.dRel, lead.yRel, calibration, color=(192,0,0))
draw_lead_car(lead.dRel, top_down)
# *** blits ***
pygame.surfarray.blit_array(camera_surface, img.swapaxes(0,1))
screen.blit(camera_surface, (0, 0))
# display alerts
alert_line1 = alert1_font.render(sm['controlsState'].alertText1, True, (255,0,0))
alert_line2 = alert2_font.render(sm['controlsState'].alertText2, True, (255,0,0))
screen.blit(alert_line1, (180, 150))
screen.blit(alert_line2, (180, 190))
if calibration is not None and img is not None:
cpw = warp_points(CalP, calibration.model_to_bb)
vanishing_pointw = warp_points(vanishing_point, calibration.model_to_bb)
pygame.draw.polygon(screen, BLUE, tuple(map(tuple, cpw)), 1)
pygame.draw.circle(screen, BLUE, list(map(int, map(round, vanishing_pointw[0]))), 2)
if HOR:
screen.blit(draw_plots(plot_arr), (640+384, 0))
else:
screen.blit(draw_plots(plot_arr), (0, 600))
pygame.surfarray.blit_array(cameraw_surface, imgw.swapaxes(0, 1))
screen.blit(cameraw_surface, (320, 480))
pygame.surfarray.blit_array(*top_down)
screen.blit(top_down[0], (640,0))
i = 0
SPACING = 25
lines = [
info_font.render("ENABLED", True, GREEN if sm['controlsState'].enabled else BLACK),
info_font.render("BRAKE LIGHTS", True, RED if sm['carState'].brakeLights else BLACK),
info_font.render("SPEED: " + str(round(sm['carState'].vEgo, 1)) + " m/s", True, YELLOW),
info_font.render("LONG CONTROL STATE: " + str(sm['controlsState'].longControlState), True, YELLOW),
info_font.render("LONG MPC SOURCE: " + str(sm['plan'].longitudinalPlanSource), True, YELLOW),
None,
info_font.render("ANGLE OFFSET (AVG): " + str(round(sm['liveParameters'].angleOffsetAverage, 2)) + " deg", True, YELLOW),
info_font.render("ANGLE OFFSET (INSTANT): " + str(round(sm['liveParameters'].angleOffset, 2)) + " deg", True, YELLOW),
info_font.render("STIFFNESS: " + str(round(sm['liveParameters'].stiffnessFactor * 100., 2)) + " %", True, YELLOW),
info_font.render("STEER RATIO: " + str(round(sm['liveParameters'].steerRatio, 2)), True, YELLOW)
]
for i, line in enumerate(lines):
if line is not None:
screen.blit(line, (write_x, write_y + i * SPACING))
# this takes time...vsync or something
pygame.display.flip()
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(4 if TICI else 3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.camera_packets = ["roadCameraState", "driverCameraState"]
if TICI:
self.camera_packets.append("wideRoadCameraState")
params = Params()
self.joystick_mode = params.get_bool("JoystickDebugMode")
joystick_packet = ['testJoystick'] if self.joystick_mode else []
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster(
[
'deviceState', 'pandaStates', 'peripheralState', 'modelV2',
'liveCalibration', 'driverMonitoringState',
'longitudinalPlan', 'lateralPlan', 'liveLocationKalman',
'managerState', 'liveParameters', 'radarState'
] + self.camera_packets + joystick_packet,
ignore_alive=ignore,
ignore_avg_freq=['radarState', 'longitudinalPlan'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
if TICI:
self.log_sock = messaging.sub_sock('androidLog')
# wait for one pandaState and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
# read params
self.is_metric = params.get_bool("IsMetric")
self.is_ldw_enabled = params.get_bool("IsLdwEnabled")
community_feature_toggle = params.get_bool("CommunityFeaturesToggle")
openpilot_enabled_toggle = params.get_bool("OpenpilotEnabledToggle")
passive = params.get_bool("Passive") or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
controller_available = self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature = self.CP.communityFeature or \
self.CP.fingerprintSource == car.CarParams.FingerprintSource.can
community_feature_disallowed = community_feature and (
not community_feature_toggle)
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
safety_config = car.CarParams.SafetyConfig.new_message()
safety_config.safetyModel = car.CarParams.SafetyModel.noOutput
self.CP.safetyConfigs = [safety_config]
# Write CarParams for radard
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP)
self.VM = VehicleModel(self.CP)
if self.CP.steerControlType == car.CarParams.SteerControlType.angle:
self.LaC = LatControlAngle(self.CP)
elif self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP, self.CI)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.initialized = False
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.cruise_mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.button_timers = {
ButtonEvent.Type.decelCruise: 0,
ButtonEvent.Type.accelCruise: 0
}
# scc smoother
self.is_cruise_enabled = False
self.applyMaxSpeed = 0
self.apply_accel = 0.
self.fused_accel = 0.
self.lead_drel = 0.
self.aReqValue = 0.
self.aReqValueMin = 0.
self.aReqValueMax = 0.
self.sccStockCamStatus = 0
self.sccStockCamAct = 0
self.left_lane_visible = False
self.right_lane_visible = False
self.wide_camera = TICI and params.get_bool('EnableWideCamera')
self.disable_op_fcw = params.get_bool('DisableOpFcw')
# TODO: no longer necessary, aside from process replay
self.sm['liveParameters'].valid = True
self.startup_event = get_startup_event(car_recognized,
controller_available,
len(self.CP.carFw) > 0)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed and car_recognized and not self.CP.dashcamOnly:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
if len(self.CP.carFw) > 0:
set_offroad_alert("Offroad_CarUnrecognized", True)
else:
set_offroad_alert("Offroad_NoFirmware", True)
elif self.read_only:
self.events.add(EventName.dashcamMode, static=True)
elif self.joystick_mode:
self.events.add(EventName.joystickDebug, static=True)
self.startup_event = None
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
self.sm = messaging.SubMaster([
'thermal', 'health', 'model', 'liveCalibration', 'frontFrame',
'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman'
])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one health and one CAN packet
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'])
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
internet_needed = (params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None) and (
params.get("DisableUpdates") != b"1")
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1" or \
internet_needed or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['thermal'].freeSpace = 1.
self.sm['dMonitoringState'].events = []
self.sm['dMonitoringState'].awarenessStatus = 1.
self.sm['dMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if internet_needed:
self.events.add(EventName.internetConnectivityNeeded, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def manager_thread():
# now loop
thermal_sock = messaging.sub_sock('thermal')
cloudlog.info("manager start")
cloudlog.info({"environ": os.environ})
# save boot log
subprocess.call(["./loggerd", "--bootlog"],
cwd=os.path.join(BASEDIR, "selfdrive/loggerd"))
params = Params()
# start daemon processes
for p in daemon_processes:
start_daemon_process(p)
# start persistent processes
for p in persistent_processes:
start_managed_process(p)
# start offroad
if ANDROID:
pm_apply_packages('enable')
start_offroad()
if os.getenv("NOBOARD") is None:
start_managed_process("pandad")
if os.getenv("BLOCK") is not None:
for k in os.getenv("BLOCK").split(","):
del managed_processes[k]
started_prev = False
logger_dead = False
while 1:
msg = messaging.recv_sock(thermal_sock, wait=True)
# heavyweight batch processes are gated on favorable thermal conditions
if msg.thermal.thermalStatus >= ThermalStatus.yellow:
for p in green_temp_processes:
if p in persistent_processes:
kill_managed_process(p)
else:
for p in green_temp_processes:
if p in persistent_processes:
start_managed_process(p)
if msg.thermal.freeSpace < 0.05:
logger_dead = True
if msg.thermal.started:
for p in car_started_processes:
if p == "loggerd" and logger_dead:
kill_managed_process(p)
else:
start_managed_process(p)
else:
logger_dead = False
driver_view = params.get("IsDriverViewEnabled") == b"1"
# TODO: refactor how manager manages processes
for p in reversed(car_started_processes):
if p not in driver_view_processes or not driver_view:
kill_managed_process(p)
for p in driver_view_processes:
if driver_view:
start_managed_process(p)
else:
kill_managed_process(p)
# trigger an update after going offroad
if started_prev:
send_managed_process_signal("updated", signal.SIGHUP)
started_prev = msg.thermal.started
# check the status of all processes, did any of them die?
running_list = [
"%s%s\u001b[0m" %
("\u001b[32m" if running[p].is_alive() else "\u001b[31m", p)
for p in running
]
cloudlog.debug(' '.join(running_list))
# Exit main loop when uninstall is needed
if params.get("DoUninstall", encoding='utf8') == "1":
break
def __init__(self):
self.slowing_down = False
self.started_dist = 0
self.sock = messaging.sub_sock("roadLimitSpeed")
self.roadLimitSpeed = None
def mapsd_thread():
global last_gps
gps_sock = messaging.sub_sock('gpsLocation', conflate=True)
gps_external_sock = messaging.sub_sock('gpsLocationExternal',
conflate=True)
map_data_sock = messaging.pub_sock('liveMapData')
cur_way = None
curvature_valid = False
curvature = None
upcoming_curvature = 0.
dist_to_turn = 0.
road_points = None
while True:
gps = messaging.recv_one(gps_sock)
gps_ext = messaging.recv_one_or_none(gps_external_sock)
if gps_ext is not None:
gps = gps_ext.gpsLocationExternal
else:
gps = gps.gpsLocation
last_gps = gps
fix_ok = gps.flags & 1
if not fix_ok or last_query_result is None or not cache_valid:
cur_way = None
curvature = None
curvature_valid = False
upcoming_curvature = 0.
dist_to_turn = 0.
road_points = None
map_valid = False
else:
map_valid = True
lat = gps.latitude
lon = gps.longitude
heading = gps.bearing
speed = gps.speed
query_lock.acquire()
cur_way = Way.closest(last_query_result, lat, lon, heading,
cur_way)
if cur_way is not None:
pnts, curvature_valid = cur_way.get_lookahead(
lat, lon, heading, MAPS_LOOKAHEAD_DISTANCE)
xs = pnts[:, 0]
ys = pnts[:, 1]
road_points = [float(x) for x in xs], [float(y) for y in ys]
if speed < 10:
curvature_valid = False
if curvature_valid and pnts.shape[0] <= 3:
curvature_valid = False
# The curvature is valid when at least MAPS_LOOKAHEAD_DISTANCE of road is found
if curvature_valid:
# Compute the curvature for each point
with np.errstate(divide='ignore'):
circles = [
circle_through_points(*p)
for p in zip(pnts, pnts[1:], pnts[2:])
]
circles = np.asarray(circles)
radii = np.nan_to_num(circles[:, 2])
radii[radii < 10] = np.inf
curvature = 1. / radii
# Index of closest point
closest = np.argmin(np.linalg.norm(pnts, axis=1))
dist_to_closest = pnts[
closest,
0] # We can use x distance here since it should be close
# Compute distance along path
dists = list()
dists.append(0)
for p, p_prev in zip(pnts, pnts[1:, :]):
dists.append(dists[-1] + np.linalg.norm(p - p_prev))
dists = np.asarray(dists)
dists = dists - dists[closest] + dist_to_closest
dists = dists[1:-1]
close_idx = np.logical_and(dists > 0, dists < 500)
dists = dists[close_idx]
curvature = curvature[close_idx]
if len(curvature):
# TODO: Determine left or right turn
curvature = np.nan_to_num(curvature)
# Outlier rejection
new_curvature = np.percentile(curvature,
90,
interpolation='lower')
k = 0.6
upcoming_curvature = k * upcoming_curvature + (
1 - k) * new_curvature
in_turn_indices = curvature > 0.8 * new_curvature
if np.any(in_turn_indices):
dist_to_turn = np.min(dists[in_turn_indices])
else:
dist_to_turn = 999
else:
upcoming_curvature = 0.
dist_to_turn = 999
query_lock.release()
dat = messaging.new_message('liveMapData')
if last_gps is not None:
dat.liveMapData.lastGps = last_gps
if cur_way is not None:
dat.liveMapData.wayId = cur_way.id
# Speed limit
max_speed = cur_way.max_speed()
if max_speed is not None:
dat.liveMapData.speedLimitValid = True
dat.liveMapData.speedLimit = max_speed
# TODO: use the function below to anticipate upcoming speed limits
#max_speed_ahead, max_speed_ahead_dist = cur_way.max_speed_ahead(max_speed, lat, lon, heading, MAPS_LOOKAHEAD_DISTANCE)
#if max_speed_ahead is not None and max_speed_ahead_dist is not None:
# dat.liveMapData.speedLimitAheadValid = True
# dat.liveMapData.speedLimitAhead = float(max_speed_ahead)
# dat.liveMapData.speedLimitAheadDistance = float(max_speed_ahead_dist)
advisory_max_speed = cur_way.advisory_max_speed()
if advisory_max_speed is not None:
dat.liveMapData.speedAdvisoryValid = True
dat.liveMapData.speedAdvisory = advisory_max_speed
# Curvature
dat.liveMapData.curvatureValid = curvature_valid
dat.liveMapData.curvature = float(upcoming_curvature)
dat.liveMapData.distToTurn = float(dist_to_turn)
if road_points is not None:
dat.liveMapData.roadX, dat.liveMapData.roadY = road_points
if curvature is not None:
dat.liveMapData.roadCurvatureX = [float(x) for x in dists]
dat.liveMapData.roadCurvature = [float(x) for x in curvature]
dat.liveMapData.mapValid = map_valid
map_data_sock.send(dat.to_bytes())
fig, ax = plt.subplots()
#fig = plt.figure(figsize=(10, 15))
#ax = fig.add_subplot(111)
ax.grid(True)
fig.canvas.draw()
subs_name = sys.argv[1:]
lines = []
x, y = [], []
LEN = 500
for i, sub in enumerate(subs_name):
sub_split = sub.split(".")
services.append(sub_split[0])
fields.append(".".join(sub_split[1:]))
subs.append(messaging.sub_sock(sub_split[0], poller))
x.append(np.ones(LEN) * np.nan)
y.append(np.ones(LEN) * np.nan)
lines.append(ax.plot(x[i], y[i])[0])
for l in lines:
l.set_marker("*")
cur_t = 0.
ax.legend(subs_name)
ax.set_xlabel('time [s]')
while 1:
print(1. / (time.time() - cur_t))
cur_t = time.time()
def ui_thread(addr, frame_address):
pygame.init()
pygame.font.init()
assert pygame_modules_have_loaded()
size = (int(_FULL_FRAME_SIZE[0] * SCALE), int(_FULL_FRAME_SIZE[1] * SCALE))
print(size)
pygame.display.set_caption("comma one debug UI")
screen = pygame.display.set_mode(size, pygame.DOUBLEBUF)
camera_surface = pygame.surface.Surface(
(_FULL_FRAME_SIZE[0] * SCALE, _FULL_FRAME_SIZE[1] * SCALE), 0,
24).convert()
frame = messaging.sub_sock('frame', conflate=True)
img = np.zeros((_FULL_FRAME_SIZE[1], _FULL_FRAME_SIZE[0], 3),
dtype='uint8')
imgff = np.zeros((_FULL_FRAME_SIZE[1], _FULL_FRAME_SIZE[0], 3),
dtype=np.uint8)
while 1:
list(pygame.event.get())
screen.fill((64, 64, 64))
# ***** frame *****
fpkt = messaging.recv_one(frame)
yuv_img = fpkt.frame.image
if fpkt.frame.transform:
yuv_transform = np.array(fpkt.frame.transform).reshape(3, 3)
else:
# assume frame is flipped
yuv_transform = np.array([[-1.0, 0.0, _FULL_FRAME_SIZE[0] - 1],
[0.0, -1.0, _FULL_FRAME_SIZE[1] - 1],
[0.0, 0.0, 1.0]])
if yuv_img and len(
yuv_img) == _FULL_FRAME_SIZE[0] * _FULL_FRAME_SIZE[1] * 3 // 2:
yuv_np = np.frombuffer(yuv_img, dtype=np.uint8).reshape(
_FULL_FRAME_SIZE[1] * 3 // 2, -1)
cv2.cvtColor(yuv_np, cv2.COLOR_YUV2RGB_I420, dst=imgff)
cv2.warpAffine(imgff,
np.dot(yuv_transform, _BB_TO_FULL_FRAME)[:2],
(img.shape[1], img.shape[0]),
dst=img,
flags=cv2.WARP_INVERSE_MAP)
else:
# actually RGB
img = np.frombuffer(yuv_img, dtype=np.uint8).reshape(
(_FULL_FRAME_SIZE[1], _FULL_FRAME_SIZE[0], 3))
img = img[:, :, ::-1] # Convert BGR to RGB
height, width = img.shape[:2]
img_resized = cv2.resize(img,
(int(SCALE * width), int(SCALE * height)),
interpolation=cv2.INTER_CUBIC)
# *** blits ***
pygame.surfarray.blit_array(camera_surface, img_resized.swapaxes(0, 1))
screen.blit(camera_surface, (0, 0))
# this takes time...vsync or something
pygame.display.flip()
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaStates',
timeout=pandaState_timeout)
sm = messaging.SubMaster(
["peripheralState", "gpsLocationExternal", "managerState"])
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
nvme_temps = None
modem_temps = None
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
in_car = False
handle_fan = None
is_uno = False
ui_running_prev = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
# TODO: use PI controller for UNO
controller = PIController(k_p=0,
k_i=2e-3,
neg_limit=-80,
pos_limit=0,
rate=(1 / DT_TRML))
# Leave flag for loggerd to indicate device was left onroad
if params.get_bool("IsOnroad"):
params.put_bool("BootedOnroad", True)
while True:
pandaStates = messaging.recv_sock(pandaState_sock, wait=True)
sm.update(0)
peripheralState = sm['peripheralState']
msg = read_thermal(thermal_config)
if pandaStates is not None and len(pandaStates.pandaStates) > 0:
pandaState = pandaStates.pandaStates[0]
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = pandaState.ignitionLine or pandaState.ignitionCan
in_car = pandaState.harnessStatus != log.PandaState.HarnessStatus.notConnected
usb_power = peripheralState.usbPowerMode != log.PeripheralState.UsbPowerMode.client
# Setup fan handler on first connect to panda
if handle_fan is None and peripheralState.pandaType != log.PandaState.PandaType.unknown:
is_uno = peripheralState.pandaType == log.PandaState.PandaType.uno
if TICI:
cloudlog.info("Setting up TICI fan handler")
handle_fan = handle_fan_tici
elif is_uno or PC:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
# these are expensive calls. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
nvme_temps = HARDWARE.get_nvme_temperatures()
modem_temps = HARDWARE.get_modem_temperatures()
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(
f"Modem stuck in registered state {network_info}. nmcli conn up lte"
)
os.system("nmcli conn up lte")
registered_count = 0
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [
int(round(n)) for n in psutil.cpu_percent(percpu=True)
]
msg.deviceState.gpuUsagePercent = int(
round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
if network_info is not None:
msg.deviceState.networkInfo = network_info
if nvme_temps is not None:
msg.deviceState.nvmeTempC = nvme_temps
if modem_temps is not None:
msg.deviceState.modemTempC = modem_temps
msg.deviceState.screenBrightnessPercent = HARDWARE.get_screen_brightness(
)
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC)))
if handle_fan is not None:
fan_speed = handle_fan(controller, max_comp_temp, fan_speed,
startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if tested_branch:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get_bool(
"DisableUpdates")
startup_conditions["not_uninstalling"] = not params.get_bool(
"DoUninstall")
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool(
"IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool(
"IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_StorageMissing",
(not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(peripheralState,
startup_conditions["ignition"])
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
startup_conditions["ignition"], in_car, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(peripheralState,
startup_conditions["ignition"],
in_car, off_ts, started_seen):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
ui_running = "ui" in (p.name for p in sm["managerState"].processes
if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled",
(not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
cloudlog.event("High offroad memory usage",
mem=msg.deviceState.memoryUsagePercent)
cloudlog.event(
"STATUS_PACKET",
count=count,
pandaStates=(strip_deprecated_keys(pandaStates.to_dict())
if pandaStates else None),
peripheralState=strip_deprecated_keys(
peripheralState.to_dict()),
location=(strip_deprecated_keys(
sm["gpsLocationExternal"].to_dict())
if sm.alive["gpsLocationExternal"] else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def __init__(self, sm=None, pm=None, can_sock=None):
gc.disable()
set_realtime_priority(3)
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster(['sendcan', 'controlsState', 'carState', \
'carControl', 'carEvents', 'carParams'])
self.sm = sm
if self.sm is None:
self.sm = messaging.SubMaster(['thermal', 'health', 'model', 'liveCalibration', \
'dMonitoringState', 'plan', 'pathPlan', 'liveLocationKalman'])
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one health and one CAN packet
hw_type = messaging.recv_one(self.sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno]
print("Waiting for CAN messages...")
messaging.get_one_can(self.can_sock)
self.CI, self.CP = get_car(self.can_sock, self.pm.sock['sendcan'],
has_relay)
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
internet_needed = params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1" or \
internet_needed or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = not os.path.isfile('/EON') or (os.path.isfile('/proc/asound/card0/state') \
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
put_nonblocking("LongitudinalControl",
"1" if self.CP.openpilotLongitudinalControl else "0")
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.consecutive_can_error_count = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.events_prev = []
self.current_alert_types = []
self.sm['liveCalibration'].calStatus = Calibration.INVALID
self.sm['thermal'].freeSpace = 1.
self.sm['dMonitoringState'].events = []
self.sm['dMonitoringState'].awarenessStatus = 1.
self.sm['dMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available, hw_type)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if internet_needed:
self.events.add(EventName.internetConnectivityNeeded, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if self.read_only and not passive:
self.events.add(EventName.carUnrecognized, static=True)
# if hw_type == HwType.whitePanda:
# self.events.add(EventName.whitePandaUnsupported, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 100 #10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
OpkrLoadStep = 0
OpkrAutoShutdown = 0
do_uninstall = 0
accepted_terms = 0
completed_training = 0
panda_signature = 0
ts_last_ip = 0
ip_addr = '255.255.255.255'
# sound trigger
sound_trigger = 1
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = Params().get('OpkrEnableGetoffAlert') == b'1'
while 1:
OpkrLoadStep += 1
if OpkrLoadStep == 1:
OpkrAutoShutdown = params.get_OpkrAutoShutdown()
elif OpkrLoadStep == 2:
do_uninstall = params.get("DoUninstall") == b"1"
elif OpkrLoadStep == 3:
accepted_terms = params.get("HasAcceptedTerms") == terms_version
elif OpkrLoadStep == 4:
completed_training = params.get(
"CompletedTrainingVersion") == training_version
elif OpkrLoadStep == 5:
panda_signature = params.get("PandaFirmware")
else:
OpkrLoadStep = 0
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int(params.get("IsOpenpilotViewEnabled"))
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
# update ip every 10 seconds
ts = sec_since_boot()
if ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"],
encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)",
result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# if current_connectivity_alert != "expired":
# current_connectivity_alert = "expired"
# params.delete("Offroad_ConnectivityNeededPrompt")
# put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# if current_connectivity_alert != "prompt" + remaining_time:
# current_connectivity_alert = "prompt" + remaining_time
# alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
# alert_connectivity_prompt["text"] += remaining_time + " days."
# params.delete("Offroad_ConnectivityNeeded")
# put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
# elif current_connectivity_alert is not None:
# current_connectivity_alert = None
# params.delete("Offroad_ConnectivityNeeded")
# params.delete("Offroad_ConnectivityNeededPrompt")
#accepted_terms = params.get("HasAcceptedTerms") == terms_version
#completed_training = params.get("CompletedTrainingVersion") == training_version
#panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (
not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
current_ts = sec_since_boot()
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = current_ts
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = current_ts
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
if sound_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and started_seen and (
sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([
mediaplayer + 'mediaplayer',
'/data/openpilot/selfdrive/assets/sounds/eondetach.wav'
],
shell=False,
stdin=None,
stdout=None,
stderr=None,
env=env,
close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
power_shutdown = False
if msg.thermal.batteryStatus == "Discharging":
delta_ts = current_ts - off_ts
if started_seen:
if msg.thermal.batteryPercent <= BATT_PERC_OFF and (
OpkrAutoShutdown and delta_ts > OpkrAutoShutdown):
power_shutdown = True
elif delta_ts > 240 and msg.thermal.batteryPercent < 10:
power_shutdown = True
if power_shutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
print('power_shutdown batterypercent={} should_start={}'.
format(msg.thermal.batteryPercent, should_start))
else:
off_ts = current_ts
#print( 'OpkrAutoShutdown = {}'.format( OpkrAutoShutdown ) )
#if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
# started_seen and (current_ts - off_ts) > 60:
# os.system('LD_LIBRARY_PATH="" svc power shutdown')
# print( 'batterypercent={} should_start={}'.format(msg.thermal.batteryPercent, should_start) )
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking(
"Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if usb_power:
pm.charging_ctrl(msg, ts, 80, 70)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def manager_thread():
# now loop
thermal_sock = messaging.sub_sock('thermal')
gps_sock = messaging.sub_sock('gpsLocation', conflate=True)
if os.getenv("GET_CPU_USAGE"):
proc_sock = messaging.sub_sock('procLog', conflate=True)
cloudlog.info("manager start")
cloudlog.info({"environ": os.environ})
# save boot log
#subprocess.call(["./loggerd", "--bootlog"], cwd=os.path.join(BASEDIR, "selfdrive/loggerd"))
params = Params()
# start daemon processes
#for p in daemon_processes:
# start_daemon_process(p)
# start persistent processes
for p in persistent_processes:
start_managed_process(p)
# start offroad
if ANDROID:
pm_apply_packages('enable')
start_offroad()
if os.getenv("NOBOARD") is None:
start_managed_process("pandad")
if os.getenv("BLOCK") is not None:
for k in os.getenv("BLOCK").split(","):
del managed_processes[k]
logger_dead = False
start_t = time.time()
first_proc = None
while 1:
gps = messaging.recv_one_or_none(gps_sock)
msg = messaging.recv_sock(thermal_sock, wait=True)
if gps:
if 47.3024876979 < gps.gpsLocation.latitude < 54.983104153 and 5.98865807458 < gps.gpsLocation.longitude < 15.0169958839:
logger_dead = True
else:
logger_dead = True
# heavyweight batch processes are gated on favorable thermal conditions
if msg.thermal.thermalStatus >= ThermalStatus.yellow:
for p in green_temp_processes:
if p in persistent_processes:
kill_managed_process(p)
else:
for p in green_temp_processes:
if p in persistent_processes:
start_managed_process(p)
if msg.thermal.freeSpace < 0.05:
logger_dead = True
if msg.thermal.started and "driverview" not in running:
for p in car_started_processes:
if p == "loggerd" and logger_dead:
kill_managed_process(p)
else:
start_managed_process(p)
else:
logger_dead = False
for p in reversed(car_started_processes):
kill_managed_process(p)
# this is ugly
if "driverview" not in running and params.get(
"IsDriverViewEnabled") == b"1":
start_managed_process("driverview")
elif "driverview" in running and params.get(
"IsDriverViewEnabled") == b"0":
kill_managed_process("driverview")
# check the status of all processes, did any of them die?
running_list = [
"%s%s\u001b[0m" %
("\u001b[32m" if running[p].is_alive() else "\u001b[31m", p)
for p in running
]
cloudlog.debug(' '.join(running_list))
# Exit main loop when uninstall is needed
if params.get("DoUninstall", encoding='utf8') == "1":
break
if os.getenv("GET_CPU_USAGE"):
dt = time.time() - start_t
# Get first sample
if dt > 30 and first_proc is None:
first_proc = messaging.recv_sock(proc_sock)
# Get last sample and exit
if dt > 90:
last_proc = messaging.recv_sock(proc_sock, wait=True)
cleanup_all_processes(None, None)
sys.exit(print_cpu_usage(first_proc, last_proc))
def __init__(self, sm=None, pm=None, can_sock=None):
config_realtime_process(3, Priority.CTRL_HIGH)
self.op_params = opParams()
# Setup sockets
self.pm = pm
if self.pm is None:
self.pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl',
'carEvents', 'carParams'
])
self.sm = sm
if self.sm is None:
ignore = ['driverCameraState', 'managerState'
] if SIMULATION else None
self.sm = messaging.SubMaster([
'deviceState', 'pandaState', 'modelV2', 'liveCalibration',
'driverMonitoringState', 'longitudinalPlan', 'lateralPlan',
'liveLocationKalman', 'roadCameraState', 'driverCameraState',
'managerState', 'liveParameters', 'radarState'
],
ignore_alive=ignore)
self.sm_smiskol = messaging.SubMaster([
'radarState', 'dynamicFollowData', 'liveTracks',
'dynamicFollowButton', 'laneSpeed', 'dynamicCameraOffset',
'modelLongButton'
])
self.op_params = opParams()
self.df_manager = dfManager()
self.support_white_panda = self.op_params.get('support_white_panda')
self.last_model_long = False
self.can_sock = can_sock
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT',
False) else 100
self.can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for one pandaState and one CAN packet
panda_type = messaging.recv_one(
self.sm.sock['pandaState']).pandaState.pandaType
has_relay = panda_type in [
PandaType.blackPanda, PandaType.uno, PandaType.dos
]
print("Waiting for CAN messages...")
get_one_can(self.can_sock)
self.CI, self.CP, candidate = get_car(self.can_sock,
self.pm.sock['sendcan'],
has_relay)
threading.Thread(target=log_fingerprint, args=[candidate]).start()
# read params
params = Params()
self.is_metric = params.get("IsMetric", encoding='utf8') == "1"
self.is_ldw_enabled = params.get("IsLdwEnabled",
encoding='utf8') == "1"
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
passive = params.get(
"Passive", encoding='utf8') == "1" or not openpilot_enabled_toggle
# detect sound card presence and ensure successful init
sounds_available = HARDWARE.get_sound_card_online()
car_recognized = self.CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not dashcam mode
controller_available = self.CP.enableCamera and self.CI.CC is not None and not passive and not self.CP.dashcamOnly
community_feature_disallowed = self.CP.communityFeature and not community_feature_toggle
self.read_only = not car_recognized or not controller_available or \
self.CP.dashcamOnly or community_feature_disallowed
if self.read_only:
self.CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = self.CP.to_bytes()
params.put("CarParams", cp_bytes)
put_nonblocking("CarParamsCache", cp_bytes)
self.CC = car.CarControl.new_message()
self.AM = AlertManager()
self.events = Events()
self.LoC = LongControl(self.CP, self.CI.compute_gb, candidate)
self.VM = VehicleModel(self.CP)
if self.CP.lateralTuning.which() == 'pid':
self.LaC = LatControlPID(self.CP)
elif self.CP.lateralTuning.which() == 'indi':
self.LaC = LatControlINDI(self.CP)
elif self.CP.lateralTuning.which() == 'lqr':
self.LaC = LatControlLQR(self.CP)
self.state = State.disabled
self.enabled = False
self.active = False
self.can_rcv_error = False
self.soft_disable_timer = 0
self.v_cruise_kph = 255
self.v_cruise_kph_last = 0
self.mismatch_counter = 0
self.can_error_counter = 0
self.last_blinker_frame = 0
self.saturated_count = 0
self.distance_traveled = 0
self.last_functional_fan_frame = 0
self.events_prev = []
self.current_alert_types = [ET.PERMANENT]
self.logged_comm_issue = False
self.sm['liveCalibration'].calStatus = Calibration.CALIBRATED
self.sm['deviceState'].freeSpacePercent = 100
self.sm['driverMonitoringState'].events = []
self.sm['driverMonitoringState'].awarenessStatus = 1.
self.sm['driverMonitoringState'].faceDetected = False
self.startup_event = get_startup_event(car_recognized,
controller_available)
if not sounds_available:
self.events.add(EventName.soundsUnavailable, static=True)
if community_feature_disallowed:
self.events.add(EventName.communityFeatureDisallowed, static=True)
if not car_recognized:
self.events.add(EventName.carUnrecognized, static=True)
# controlsd is driven by can recv, expected at 100Hz
self.rk = Ratekeeper(100, print_delay_threshold=None)
self.prof = Profiler(False) # off by default
self.lead_rel_speed = 255
self.lead_long_dist = 255
signal.signal(signal.SIGINT, sigint_handler)
if __name__ == "__main__":
parser = argparse.ArgumentParser(description='Sniff a communcation socket')
parser.add_argument('--addr', default='127.0.0.1')
args = parser.parse_args()
if args.addr != "127.0.0.1":
os.environ["ZMQ"] = "1"
messaging.context = messaging.Context()
carControl = messaging.sub_sock('carControl',
addr=args.addr,
conflate=True)
sm = messaging.SubMaster(['carState', 'carControl', 'controlsState'],
addr=args.addr)
msg_cnt = 0
stats = defaultdict(lambda: {'err': 0, "cnt": 0, "=": 0, "+": 0, "-": 0})
cnt = 0
total_error = 0
while messaging.recv_one(carControl):
sm.update()
msg_cnt += 1
actual_speed = sm['carState'].vEgo
enabled = sm['controlsState'].enabled
parser.add_argument('--dump-json', action='store_true')
parser.add_argument('--no-print', action='store_true')
parser.add_argument('--addr', default='127.0.0.1')
parser.add_argument('--values',
help='values to monitor (instead of entire event)')
parser.add_argument("socket", type=str, nargs='*', help="socket name")
args = parser.parse_args()
if args.addr != "127.0.0.1":
os.environ["ZMQ"] = "1"
messaging.context = messaging.Context()
poller = messaging.Poller()
for m in args.socket if len(args.socket) > 0 else service_list:
messaging.sub_sock(m, poller, addr=args.addr)
values = None
if args.values:
values = [s.strip().split(".") for s in args.values.split(",")]
while 1:
polld = poller.poll(100)
for sock in polld:
msg = sock.receive()
evt = log.Event.from_bytes(msg)
if not args.no_print:
if args.pipe:
sys.stdout.write(msg)
sys.stdout.flush()
def mpc_vwr_thread(addr="127.0.0.1"):
plt.ion()
fig = plt.figure(figsize=(15, 15))
ax = fig.add_subplot(1, 1, 1)
ax.set_xlim([-SCALE, SCALE])
ax.set_ylim([-SCALE, SCALE])
ax.grid(True)
line, = ax.plot([0.0], [0.0], ".b")
line2, = ax.plot([0.0], [0.0], 'r')
ax.set_aspect('equal', 'datalim')
plt.show()
live_location = messaging.sub_sock('liveLocation',
addr=addr,
conflate=True)
gps_planner_points = messaging.sub_sock('gpsPlannerPoints', conflate=True)
gps_planner_plan = messaging.sub_sock('gpsPlannerPlan', conflate=True)
last_points = messaging.recv_one(gps_planner_points)
last_plan = messaging.recv_one(gps_planner_plan)
while True:
p = messaging.recv_one_or_none(gps_planner_points)
pl = messaging.recv_one_or_none(gps_planner_plan)
ll = messaging.recv_one(live_location).liveLocation
if p is not None:
last_points = p
if pl is not None:
last_plan = pl
if not last_plan.gpsPlannerPlan.valid:
time.sleep(0.1)
line2.set_color('r')
continue
p0 = last_points.gpsPlannerPoints.points[0]
p0 = np.array([p0.x, p0.y, p0.z])
n = LocalCoord.from_geodetic(np.array([ll.lat, ll.lon, ll.alt]))
points = []
print(len(last_points.gpsPlannerPoints.points))
for p in last_points.gpsPlannerPoints.points:
ecef = np.array([p.x, p.y, p.z])
points.append(n.ecef2ned(ecef))
points = np.vstack(points)
line.set_xdata(points[:, 1])
line.set_ydata(points[:, 0])
y = np.matrix(np.arange(-100, 100.0, 0.5))
x = -np.matrix(np.polyval(last_plan.gpsPlannerPlan.poly, y))
xy = np.hstack([x.T, y.T])
cur_heading = np.radians(ll.heading - 90)
c, s = np.cos(cur_heading), np.sin(cur_heading)
R = np.array([[c, -s], [s, c]])
xy = xy.dot(R)
line2.set_xdata(xy[:, 1])
line2.set_ydata(-xy[:, 0])
line2.set_color('g')
ax.set_xlim([-SCALE, SCALE])
ax.set_ylim([-SCALE, SCALE])
fig.canvas.draw()
fig.canvas.flush_events()
def thermald_thread():
pm = messaging.PubMaster(['thermal'])
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = HARDWARE.get_battery_capacity()
msg.thermal.batteryStatus = HARDWARE.get_battery_status()
msg.thermal.batteryCurrent = HARDWARE.get_battery_current()
msg.thermal.batteryVoltage = HARDWARE.get_battery_voltage()
msg.thermal.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem,
max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed,
startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
thermal_status = ThermalStatus.green # default to good condition
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get(
"DisableUpdates") == b"1"
startup_conditions["not_uninstalling"] = not params.get(
"DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get(
"IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get(
"IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
startup_conditions[
"hardware_supported"] = health is not None and health.health.hwType not in [
log.HealthData.HwType.whitePanda,
log.HealthData.HwType.greyPanda
]
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported", health is not None
and not startup_conditions["hardware_supported"])
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(health)
msg.thermal.offroadPowerUsage = power_monitor.get_power_used()
msg.thermal.carBatteryCapacity = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.thermal.chargingDisabled = power_monitor.should_disable_charging(
health, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(health, off_ts, started_seen, LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
pm.send("thermal", msg)
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
location = messaging.recv_sock(location_sock)
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.gpsLocation.to_dict()
if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [
log.HealthData.HwType.blackPanda, log.HealthData.HwType.uno
]
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay and
(started_ts is None)
and max_cpu_temp > 75.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 100.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 97.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking(
"Offroad_ConnectivityNeeded",
json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(
OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt",
json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get(
"CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (
not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking(
"Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def manager_thread():
cloudlog.info("manager start")
cloudlog.info({"environ": os.environ})
# save boot log
subprocess.call("./bootlog",
cwd=os.path.join(BASEDIR, "selfdrive/loggerd"))
# start daemon processes
for p in daemon_processes:
start_daemon_process(p)
# start persistent processes
for p in persistent_processes:
start_managed_process(p)
# start offroad
if EON:
pm_apply_packages('enable')
start_offroad()
if os.getenv("NOBOARD") is not None:
del managed_processes["pandad"]
if os.getenv("BLOCK") is not None:
for k in os.getenv("BLOCK").split(","):
del managed_processes[k]
started_prev = False
logger_dead = False
params = Params()
thermal_sock = messaging.sub_sock('thermal')
pm = messaging.PubMaster(['managerState'])
while 1:
msg = messaging.recv_sock(thermal_sock, wait=True)
if msg.thermal.freeSpacePercent < 0.05:
logger_dead = True
if msg.thermal.started:
for p in car_started_processes:
if p == "loggerd" and logger_dead:
kill_managed_process(p)
else:
start_managed_process(p)
else:
logger_dead = False
driver_view = params.get("IsDriverViewEnabled") == b"1"
# TODO: refactor how manager manages processes
for p in reversed(car_started_processes):
if p not in driver_view_processes or not driver_view:
kill_managed_process(p)
for p in driver_view_processes:
if driver_view:
start_managed_process(p)
else:
kill_managed_process(p)
# trigger an update after going offroad
if started_prev:
os.sync()
send_managed_process_signal("updated", signal.SIGHUP)
started_prev = msg.thermal.started
# check the status of all processes, did any of them die?
running_list = [
"%s%s\u001b[0m" %
("\u001b[32m" if running[p].is_alive() else "\u001b[31m", p)
for p in running
]
cloudlog.debug(' '.join(running_list))
# send managerState
states = []
for p in managed_processes:
state = log.ManagerState.ProcessState.new_message()
state.name = p
if p in running:
state.running = running[p].is_alive()
state.pid = running[p].pid
state.exitCode = running[p].exitcode or 0
states.append(state)
msg = messaging.new_message('managerState')
msg.managerState.processes = states
pm.send('managerState', msg)
# Exit main loop when uninstall is needed
if params.get("DoUninstall", encoding='utf8') == "1":
break
def receiver_thread():
if PYGAME:
pygame.init()
pygame.display.set_caption("vnet debug UI")
screen = pygame.display.set_mode((1164, 874), pygame.DOUBLEBUF)
camera_surface = pygame.surface.Surface((1164, 874), 0, 24).convert()
addr = "192.168.5.11"
if len(sys.argv) >= 2:
addr = sys.argv[1]
context = zmq.Context()
s = messaging.sub_sock(context, 9002, addr=addr)
frame_sock = messaging.pub_sock(context, service_list['frame'].port)
ctx = av.codec.codec.Codec('hevc', 'r').create()
ctx.decode(av.packet.Packet(start.decode("hex")))
import time
while 1:
t1 = time.time()
ts, raw = s.recv_multipart()
ts = struct.unpack('q', ts)[0] * 1000
t1, t2 = time.time(), t1
#print 'ms to get frame:', (t1-t2)*1000
pkt = av.packet.Packet(raw)
f = ctx.decode(pkt)
if not f:
continue
f = f[0]
t1, t2 = time.time(), t1
#print 'ms to decode:', (t1-t2)*1000
y_plane = np.frombuffer(f.planes[0], np.uint8).reshape(
(874, 1216))[:, 0:1164]
u_plane = np.frombuffer(f.planes[1], np.uint8).reshape(
(437, 608))[:, 0:582]
v_plane = np.frombuffer(f.planes[2], np.uint8).reshape(
(437, 608))[:, 0:582]
yuv_img = y_plane.tobytes() + u_plane.tobytes() + v_plane.tobytes()
t1, t2 = time.time(), t1
#print 'ms to make yuv:', (t1-t2)*1000
#print 'tsEof:', ts
dat = messaging.new_message()
dat.init('frame')
dat.frame.image = yuv_img
dat.frame.timestampEof = ts
dat.frame.transform = map(float, list(np.eye(3).flatten()))
frame_sock.send(dat.to_bytes())
if PYGAME:
yuv_np = np.frombuffer(yuv_img,
dtype=np.uint8).reshape(874 * 3 // 2, -1)
cv2.cvtColor(yuv_np, cv2.COLOR_YUV2RGB_I420, dst=imgff)
#print yuv_np.shape, imgff.shape
#scipy.misc.imsave("tmp.png", imgff)
pygame.surfarray.blit_array(camera_surface, imgff.swapaxes(0, 1))
screen.blit(camera_surface, (0, 0))
pygame.display.flip()
def manager_thread():
# now loop
thermal_sock = messaging.sub_sock('thermal')
cloudlog.info("manager start")
cloudlog.info({"environ": os.environ})
params = Params()
EnableLogger = int(params.get('OpkrEnableLogger'))
#EnableLogger = (params.get("RecordFront") != b"0")
if not EnableLogger:
car_started_processes.remove('loggerd')
persistent_processes.remove('logmessaged')
persistent_processes.remove('uploader')
persistent_processes.remove('logcatd')
persistent_processes.remove('updated')
persistent_processes.remove('deleter')
persistent_processes.remove('tombstoned')
else:
# save boot log
subprocess.call(["./loggerd", "--bootlog"],
cwd=os.path.join(BASEDIR, "selfdrive/loggerd"))
# start daemon processes
for p in daemon_processes:
start_daemon_process(p)
# start persistent processes
for p in persistent_processes:
start_managed_process(p)
# start offroad
if ANDROID:
pm_apply_packages('enable')
start_offroad()
if os.getenv("NOBOARD") is None:
start_managed_process("pandad")
if os.getenv("BLOCK") is not None:
for k in os.getenv("BLOCK").split(","):
del managed_processes[k]
logger_dead = False
while 1:
msg = messaging.recv_sock(thermal_sock, wait=True)
# heavyweight batch processes are gated on favorable thermal conditions
if msg.thermal.thermalStatus >= ThermalStatus.yellow:
for p in green_temp_processes:
if p in persistent_processes:
kill_managed_process(p)
else:
for p in green_temp_processes:
if p in persistent_processes:
start_managed_process(p)
if msg.thermal.freeSpace < 0.05:
logger_dead = True
if msg.thermal.started and "driverview" not in running:
for p in car_started_processes:
if p == "loggerd" and logger_dead:
kill_managed_process(p)
else:
start_managed_process(p)
else:
logger_dead = False
for p in reversed(car_started_processes):
kill_managed_process(p)
# this is ugly
if "driverview" not in running and params.get(
"IsDriverViewEnabled") == b"1":
start_managed_process("driverview")
elif "driverview" in running and params.get(
"IsDriverViewEnabled") == b"0":
kill_managed_process("driverview")
# check the status of all processes, did any of them die?
running_list = [
"%s%s\u001b[0m" %
("\u001b[32m" if running[p].is_alive() else "\u001b[31m", p)
for p in running
]
cloudlog.debug(' '.join(running_list))
# Exit main loop when uninstall is needed
if params.get("DoUninstall", encoding='utf8') == "1":
break
def controlsd_thread(sm=None, pm=None, can_sock=None):
gc.disable()
# start the loop
set_realtime_priority(3)
params = Params()
is_metric = params.get("IsMetric", encoding='utf8') == "1"
is_ldw_enabled = params.get("IsLdwEnabled", encoding='utf8') == "1"
passive = params.get("Passive", encoding='utf8') == "1"
openpilot_enabled_toggle = params.get("OpenpilotEnabledToggle",
encoding='utf8') == "1"
community_feature_toggle = params.get("CommunityFeaturesToggle",
encoding='utf8') == "1"
passive = passive or not openpilot_enabled_toggle
# Pub/Sub Sockets
if pm is None:
pm = messaging.PubMaster([
'sendcan', 'controlsState', 'carState', 'carControl', 'carEvents',
'carParams'
])
if sm is None:
sm = messaging.SubMaster(['thermal', 'health', 'liveCalibration', 'dMonitoringState', 'plan', 'pathPlan', \
'model'])
if can_sock is None:
can_timeout = None if os.environ.get('NO_CAN_TIMEOUT', False) else 100
can_sock = messaging.sub_sock('can', timeout=can_timeout)
# wait for health and CAN packets
hw_type = messaging.recv_one(sm.sock['health']).health.hwType
has_relay = hw_type in [HwType.blackPanda, HwType.uno]
print("Waiting for CAN messages...")
messaging.get_one_can(can_sock)
CI, CP = get_car(can_sock, pm.sock['sendcan'], has_relay)
car_recognized = CP.carName != 'mock'
# If stock camera is disconnected, we loaded car controls and it's not chffrplus
controller_available = CP.enableCamera and CI.CC is not None and not passive
community_feature_disallowed = CP.communityFeature and not community_feature_toggle
read_only = not car_recognized or not controller_available or CP.dashcamOnly or community_feature_disallowed
if read_only:
CP.safetyModel = car.CarParams.SafetyModel.noOutput
# Write CarParams for radard and boardd safety mode
cp_bytes = CP.to_bytes()
params.put("CarParams", cp_bytes)
params.put("CarParamsCache", cp_bytes)
params.put("LongitudinalControl",
"1" if CP.openpilotLongitudinalControl else "0")
CC = car.CarControl.new_message()
AM = AlertManager()
startup_alert = get_startup_alert(car_recognized, controller_available)
AM.add(sm.frame, startup_alert, False)
LoC = LongControl(CP, CI.compute_gb)
VM = VehicleModel(CP)
if CP.lateralTuning.which() == 'pid':
LaC = LatControlPID(CP)
elif CP.lateralTuning.which() == 'indi':
LaC = LatControlINDI(CP)
elif CP.lateralTuning.which() == 'lqr':
LaC = LatControlLQR(CP)
state = State.disabled
soft_disable_timer = 0
v_cruise_kph = 255
v_cruise_kph_last = 0
mismatch_counter = 0
can_error_counter = 0
last_blinker_frame = 0
events_prev = []
sm['liveCalibration'].calStatus = Calibration.INVALID
sm['pathPlan'].sensorValid = True
sm['pathPlan'].posenetValid = True
sm['thermal'].freeSpace = 1.
sm['dMonitoringState'].events = []
sm['dMonitoringState'].awarenessStatus = 1.
sm['dMonitoringState'].faceDetected = False
# detect sound card presence
sounds_available = not os.path.isfile('/EON') or (
os.path.isdir('/proc/asound/card0')
and open('/proc/asound/card0/state').read().strip() == 'ONLINE')
# controlsd is driven by can recv, expected at 100Hz
rk = Ratekeeper(100, print_delay_threshold=None)
internet_needed = params.get("Offroad_ConnectivityNeeded",
encoding='utf8') is not None
prof = Profiler(False) # off by default
while True:
start_time = sec_since_boot()
prof.checkpoint("Ratekeeper", ignore=True)
# Sample data and compute car events
CS, events, cal_perc, mismatch_counter, can_error_counter = data_sample(
CI, CC, sm, can_sock, state, mismatch_counter, can_error_counter,
params)
prof.checkpoint("Sample")
# Create alerts
if not sm.alive['plan'] and sm.alive[
'pathPlan']: # only plan not being received: radar not communicating
events.append(
create_event('radarCommIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
elif not sm.all_alive_and_valid():
events.append(
create_event('commIssue', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not sm['pathPlan'].mpcSolutionValid:
events.append(
create_event('plannerError',
[ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sm['pathPlan'].sensorValid:
events.append(
create_event('sensorDataInvalid', [ET.NO_ENTRY, ET.PERMANENT]))
if not sm['pathPlan'].paramsValid:
events.append(create_event('vehicleModelInvalid', [ET.WARNING]))
if not sm['pathPlan'].posenetValid:
events.append(
create_event('posenetInvalid', [ET.NO_ENTRY, ET.WARNING]))
if not sm['plan'].radarValid:
events.append(
create_event('radarFault', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if sm['plan'].radarCanError:
events.append(
create_event('radarCanError', [ET.NO_ENTRY, ET.SOFT_DISABLE]))
if not CS.canValid:
events.append(
create_event('canError', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not sounds_available:
events.append(
create_event('soundsUnavailable', [ET.NO_ENTRY, ET.PERMANENT]))
# if internet_needed:
# events.append(create_event('internetConnectivityNeeded', [ET.NO_ENTRY, ET.PERMANENT]))
# if community_feature_disallowed:
# events.append(create_event('communityFeatureDisallowed', [ET.PERMANENT]))
if read_only and not passive:
events.append(create_event('carUnrecognized', [ET.PERMANENT]))
# Only allow engagement with brake pressed when stopped behind another stopped car
# if CS.brakePressed and sm['plan'].vTargetFuture >= STARTING_TARGET_SPEED and not CP.radarOffCan and CS.vEgo < 0.3:
# events.append(create_event('noTarget', [ET.NO_ENTRY, ET.IMMEDIATE_DISABLE]))
if not read_only:
# update control state
state, soft_disable_timer, v_cruise_kph, v_cruise_kph_last = \
state_transition(sm.frame, CS, CP, state, events, soft_disable_timer, v_cruise_kph, AM)
prof.checkpoint("State transition")
# Compute actuators (runs PID loops and lateral MPC)
actuators, v_cruise_kph, v_acc, a_acc, lac_log, last_blinker_frame = \
state_control(sm.frame, sm.rcv_frame, sm['plan'], sm['pathPlan'], CS, CP, state, events, v_cruise_kph, v_cruise_kph_last, AM, rk,
LaC, LoC, read_only, is_metric, cal_perc, last_blinker_frame)
prof.checkpoint("State Control")
# Publish data
CC, events_prev = data_send(sm, pm, CS, CI, CP, VM, state, events,
actuators, v_cruise_kph, rk, AM, LaC, LoC,
read_only, start_time, v_acc, a_acc,
lac_log, events_prev, last_blinker_frame,
is_ldw_enabled, can_error_counter)
prof.checkpoint("Sent")
rk.monitor_time()
prof.display()
def __init__(self):
self.ubloxRaw = messaging.sub_sock('ubloxRaw')
self.buf = ""
def manager_thread():
# now loop
thermal_sock = messaging.sub_sock('thermal')
if os.getenv("GET_CPU_USAGE"):
proc_sock = messaging.sub_sock('procLog', conflate=True)
cloudlog.info("manager start")
cloudlog.info({"environ": os.environ})
# save boot log
subprocess.call(["./loggerd", "--bootlog"],
cwd=os.path.join(BASEDIR, "selfdrive/loggerd"))
params = Params()
# start daemon processes
for p in daemon_processes:
start_daemon_process(p)
# start persistent processes
for p in persistent_processes:
start_managed_process(p)
# start offroad
if ANDROID:
pm_apply_packages('enable')
start_offroad()
if os.getenv("NOBOARD") is None:
start_managed_process("pandad")
if os.getenv("BLOCK") is not None:
for k in os.getenv("BLOCK").split(","):
del managed_processes[k]
logger_dead = False
# Tinkla interface
last_tinklad_send_attempt_time = 0
tinklaClient = TinklaClient()
sendUserInfoToTinkla(params=params, tinklaClient=tinklaClient)
start_t = time.time()
first_proc = None
while 1:
msg = messaging.recv_sock(thermal_sock, wait=True)
# heavyweight batch processes are gated on favorable thermal conditions
if msg.thermal.thermalStatus >= ThermalStatus.yellow:
for p in green_temp_processes:
if p in persistent_processes:
kill_managed_process(p)
else:
for p in green_temp_processes:
if p in persistent_processes:
start_managed_process(p)
# Attempt to send pending messages if there's any that queued while offline
# Seems this loop runs every second or so, throttle to once every 30s
now = time.time()
if now - last_tinklad_send_attempt_time >= 30:
tinklaClient.attemptToSendPendingMessages()
last_tinklad_send_attempt_time = now
if msg.thermal.freeSpace < 0.05:
logger_dead = True
if msg.thermal.started:
for p in car_started_processes:
if p == "loggerd" and logger_dead:
kill_managed_process(p)
else:
start_managed_process(p)
else:
logger_dead = False
for p in reversed(car_started_processes):
kill_managed_process(p)
# check the status of all processes, did any of them die?
running_list = [
"%s%s\u001b[0m" %
("\u001b[32m" if running[p].is_alive() else "\u001b[31m", p)
for p in running
]
cloudlog.debug(' '.join(running_list))
# Exit main loop when uninstall is needed
if params.get("DoUninstall", encoding='utf8') == "1":
break
if os.getenv("GET_CPU_USAGE"):
dt = time.time() - start_t
# Get first sample
if dt > 30 and first_proc is None:
first_proc = messaging.recv_sock(proc_sock)
# Get last sample and exit
if dt > 90:
first_proc = first_proc
last_proc = messaging.recv_sock(proc_sock, wait=True)
cleanup_all_processes(None, None)
sys.exit(print_cpu_usage(first_proc, last_proc))
def radard_thread(sm=None, pm=None, can_sock=None):
config_realtime_process(5 if TICI else 1 if JETSON else 2,
Priority.CTRL_LOW)
# wait for stats about the car to come in from controls
cloudlog.info("radard is waiting for CarParams")
CP = car.CarParams.from_bytes(Params().get("CarParams", block=True))
cloudlog.info("radard got CarParams")
# import the radar from the fingerprint
cloudlog.info("radard is importing %s", CP.carName)
RadarInterface = importlib.import_module(
'selfdrive.car.%s.radar_interface' % CP.carName).RadarInterface
# *** setup messaging
if can_sock is None:
can_sock = messaging.sub_sock('can')
if sm is None:
sm = messaging.SubMaster(
['modelV2', 'carState'], ignore_avg_freq=[
'modelV2', 'carState'
]) # Can't check average frequency, since radar determines timing
if pm is None:
pm = messaging.PubMaster(['radarState', 'liveTracks'])
RI = RadarInterface(CP)
rk = Ratekeeper(1.0 / CP.radarTimeStep, print_delay_threshold=None)
RD = RadarD(CP.radarTimeStep, RI.delay)
# TODO: always log leads once we can hide them conditionally
enable_lead = True #CP.openpilotLongitudinalControl or not CP.radarOffCan
while 1:
can_strings = messaging.drain_sock_raw(can_sock, wait_for_one=True)
rr = RI.update(can_strings)
if rr is None:
continue
sm.update(0)
dat = RD.update(sm, rr, enable_lead)
dat.radarState.cumLagMs = -rk.remaining * 1000.
pm.send('radarState', dat)
# *** publish tracks for UI debugging (keep last) ***
tracks = RD.tracks
dat = messaging.new_message('liveTracks', len(tracks))
for cnt, ids in enumerate(sorted(tracks.keys())):
dat.liveTracks[cnt] = {
"trackId": ids,
"dRel": float(tracks[ids].dRel),
"yRel": float(tracks[ids].yRel),
"vRel": float(tracks[ids].vRel),
}
pm.send('liveTracks', dat)
rk.monitor_time()
return car_fw
if __name__ == "__main__":
import time
import argparse
import cereal.messaging as messaging
from selfdrive.car.vin import get_vin
parser = argparse.ArgumentParser(
description='Get firmware version of ECUs')
parser.add_argument('--scan', action='store_true')
parser.add_argument('--debug', action='store_true')
args = parser.parse_args()
logcan = messaging.sub_sock('can')
sendcan = messaging.pub_sock('sendcan')
extra: Any = None
if args.scan:
extra = {}
# Honda
for i in range(256):
extra[(Ecu.unknown, 0x18da00f1 + (i << 8), None)] = []
extra[(Ecu.unknown, 0x700 + i, None)] = []
extra[(Ecu.unknown, 0x750, i)] = []
extra = {"any": {"debug": extra}}
time.sleep(1.)
t = time.time()
#!/usr/bin/env python3
import os
import time
import numpy as np
import cereal.messaging as messaging
import selfdrive.manager as manager
N = int(os.getenv("N", "5"))
TIME = int(os.getenv("TIME", "30"))
if __name__ == "__main__":
sock = messaging.sub_sock('modelV2', conflate=False, timeout=1000)
execution_times = []
for _ in range(N):
os.environ['LOGPRINT'] = 'debug'
manager.start_managed_process('modeld')
time.sleep(5)
t = []
start = time.monotonic()
while time.monotonic() - start < TIME:
msgs = messaging.drain_sock(sock, wait_for_one=True)
for m in msgs:
t.append(m.modelV2.modelExecutionTime)
execution_times.append(np.array(t[10:]) * 1000)
manager.kill_managed_process('modeld')
print("\n\n")
from cereal import log
import cereal.messaging as messaging
if __name__ == "__main__":
parser = argparse.ArgumentParser(description='Sniff a communcation socket')
parser.add_argument('--addr', default='127.0.0.1')
args = parser.parse_args()
if args.addr != "127.0.0.1":
os.environ["ZMQ"] = "1"
messaging.context = messaging.Context()
poller = messaging.Poller()
messaging.sub_sock('can', poller, addr=args.addr)
active = 0
start_t = 0
start_v = 0
max_v = 0
max_t = 0
window = deque(maxlen=10)
avg = 0
while 1:
polld = poller.poll(1000)
for sock in polld:
msg = sock.receive()
evt = log.Event.from_bytes(msg)
for item in evt.can:
