def tivo_compatible_video(vInfo, tsn, mime=''):
message = (True, '')
while True:
codec = vInfo.get('vCodec', '')
is4k = config.is4Ktivo(tsn) and codec == 'hevc'
if mime == 'video/mp4':
if not (is4k or codec == 'h264'):
message = (False, 'vCodec %s not compatible' % codec)
break
if mime == 'video/bif':
if codec != 'vc1':
message = (False, 'vCodec %s not compatible' % codec)
break
if mime == 'video/x-tivo-mpeg-ts':
if not (is4k or codec in ('h264', 'mpeg2video')):
message = (False, 'vCodec %s not compatible' % codec)
break
if codec not in ('mpeg2video', 'mpeg1video'):
message = (False, 'vCodec %s not compatible' % codec)
break
if vInfo['kbps'] != None:
abit = max('0', vInfo['aKbps'])
if (int(vInfo['kbps']) - int(abit) >
config.strtod(config.getMaxVideoBR(tsn)) / 1000):
message = (False, '%s kbps exceeds max video bitrate' %
vInfo['kbps'])
break
else:
message = (False, '%s kbps not supported' % vInfo['kbps'])
break
if config.isHDtivo(tsn):
# HD Tivo detected, skipping remaining tests.
break
if not vInfo['vFps'] in ['29.97', '59.94']:
message = (False, '%s vFps, should be 29.97' % vInfo['vFps'])
break
if ((config.get169Blacklist(tsn) and not config.get169Setting(tsn))
or (config.get169Letterbox(tsn) and config.get169Setting(tsn))):
if vInfo['dar1'] and vInfo['dar1'] not in ('4:3', '8:9', '880:657'):
message = (False, ('DAR %s not supported ' +
'by BLACKLIST_169 tivos') % vInfo['dar1'])
break
mode = (vInfo['vWidth'], vInfo['vHeight'])
if mode not in [(720, 480), (704, 480), (544, 480),
(528, 480), (480, 480), (352, 480), (352, 240)]:
message = (False, '%s x %s not in supported modes' % mode)
break
return message
def tivo_compatible_video(vInfo, tsn, mime=""):
message = (True, "")
while True:
codec = vInfo.get("vCodec", "")
is4k = config.is4Ktivo(tsn) and codec == "hevc"
if mime == "video/mp4":
if not (is4k or codec == "h264"):
message = (False, "vCodec %s not compatible" % codec)
break
if mime == "video/bif":
if codec != "vc1":
message = (False, "vCodec %s not compatible" % codec)
break
if mime == "video/x-tivo-mpeg-ts":
if not (is4k or codec in ("h264", "mpeg2video")):
message = (False, "vCodec %s not compatible" % codec)
break
if codec not in ("mpeg2video", "mpeg1video"):
message = (False, "vCodec %s not compatible" % codec)
break
if vInfo["kbps"] != None:
abit = max("0", vInfo["aKbps"])
if int(vInfo["kbps"]) - int(abit) > config.strtod(config.getMaxVideoBR(tsn)) / 1000:
message = (False, "%s kbps exceeds max video bitrate" % vInfo["kbps"])
break
else:
message = (False, "%s kbps not supported" % vInfo["kbps"])
break
if config.isHDtivo(tsn):
# HD Tivo detected, skipping remaining tests.
break
if not vInfo["vFps"] in ["29.97", "59.94"]:
message = (False, "%s vFps, should be 29.97" % vInfo["vFps"])
break
if (config.get169Blacklist(tsn) and not config.get169Setting(tsn)) or (
config.get169Letterbox(tsn) and config.get169Setting(tsn)
):
if vInfo["dar1"] and vInfo["dar1"] not in ("4:3", "8:9", "880:657"):
message = (False, ("DAR %s not supported " + "by BLACKLIST_169 tivos") % vInfo["dar1"])
break
mode = (vInfo["vWidth"], vInfo["vHeight"])
if mode not in [(720, 480), (704, 480), (544, 480), (528, 480), (480, 480), (352, 480), (352, 240)]:
message = (False, "%s x %s not in supported modes" % mode)
break
return message
def tivo_compatible_video(vInfo, tsn, mime=''):
message = (True, '')
while True:
codec = vInfo.get('vCodec', '')
is4k = config.is4Ktivo(tsn) and codec == 'hevc'
if mime == 'video/x-tivo-mpeg-ts':
if not (is4k or codec in ('h264', 'mpeg2video')):
message = (False, 'vCodec %s not compatible' % codec)
break
if codec not in ('mpeg2video', 'mpeg1video'):
message = (False, 'vCodec %s not compatible' % codec)
break
if vInfo['kbps'] != None:
abit = max('0', vInfo['aKbps'])
if (int(vInfo['kbps']) - int(abit) >
config.strtod(config.getMaxVideoBR(tsn)) / 1000):
message = (False,
'%s kbps exceeds max video bitrate' % vInfo['kbps'])
break
else:
message = (False, '%s kbps not supported' % vInfo['kbps'])
break
if config.isHDtivo(tsn):
# HD Tivo detected, skipping remaining tests.
break
if not vInfo['vFps'] in ['29.97', '59.94']:
message = (False, '%s vFps, should be 29.97' % vInfo['vFps'])
break
if ((config.get169Blacklist(tsn) and not config.get169Setting(tsn)) or
(config.get169Letterbox(tsn) and config.get169Setting(tsn))):
if vInfo['dar1'] and vInfo['dar1'] not in ('4:3', '8:9',
'880:657'):
message = (
False,
('DAR %s not supported ' + 'by BLACKLIST_169 tivos') %
vInfo['dar1'])
break
mode = (vInfo['vWidth'], vInfo['vHeight'])
if mode not in [(720, 480), (704, 480), (544, 480), (528, 480),
(480, 480), (352, 480), (352, 240)]:
message = (False, '%s x %s not in supported modes' % mode)
break
return message
def select_aspect(inFile, tsn = ''):
TIVO_WIDTH = config.getTivoWidth(tsn)
TIVO_HEIGHT = config.getTivoHeight(tsn)
vInfo = video_info(inFile)
debug('tsn: %s' % tsn)
aspect169 = config.get169Setting(tsn)
debug('aspect169: %s' % aspect169)
optres = config.getOptres(tsn)
debug('optres: %s' % optres)
if optres:
optHeight = config.nearestTivoHeight(vInfo['vHeight'])
optWidth = config.nearestTivoWidth(vInfo['vWidth'])
if optHeight < TIVO_HEIGHT:
TIVO_HEIGHT = optHeight
if optWidth < TIVO_WIDTH:
TIVO_WIDTH = optWidth
if vInfo.get('par2'):
par2 = vInfo['par2']
elif vInfo.get('par'):
par2 = float(vInfo['par'])
else:
# Assume PAR = 1.0
par2 = 1.0
debug(('File=%s vCodec=%s vWidth=%s vHeight=%s vFps=%s millisecs=%s ' +
'TIVO_HEIGHT=%s TIVO_WIDTH=%s') % (inFile, vInfo['vCodec'],
vInfo['vWidth'], vInfo['vHeight'], vInfo['vFps'],
vInfo['millisecs'], TIVO_HEIGHT, TIVO_WIDTH))
if config.isHDtivo(tsn) and not optres:
if vInfo['par']:
npar = par2
# adjust for pixel aspect ratio, if set
if npar < 1.0:
return ['-s', '%dx%d' % (vInfo['vWidth'],
math.ceil(vInfo['vHeight'] / npar))]
elif npar > 1.0:
# FFMPEG expects width to be a multiple of two
return ['-s', '%dx%d' % (math.ceil(vInfo['vWidth']*npar/2.0)*2,
vInfo['vHeight'])]
if vInfo['vHeight'] <= TIVO_HEIGHT:
# pass all resolutions to S3, except heights greater than
# conf height
return []
# else, resize video.
d = gcd(vInfo['vHeight'], vInfo['vWidth'])
rheight, rwidth = vInfo['vHeight'] / d, vInfo['vWidth'] / d
debug('rheight=%s rwidth=%s' % (rheight, rwidth))
if (rwidth, rheight) in [(1, 1)] and vInfo['par1'] == '8:9':
debug('File + PAR is within 4:3.')
return ['-aspect', '4:3', '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
elif ((rwidth, rheight) in [(4, 3), (10, 11), (15, 11), (59, 54),
(59, 72), (59, 36), (59, 54)] or
vInfo['dar1'] == '4:3'):
debug('File is within 4:3 list.')
return ['-aspect', '4:3', '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
elif (((rwidth, rheight) in [(16, 9), (20, 11), (40, 33), (118, 81),
(59, 27)] or vInfo['dar1'] == '16:9')
and (aspect169 or config.get169Letterbox(tsn))):
debug('File is within 16:9 list and 16:9 allowed.')
if config.get169Blacklist(tsn) or (aspect169 and
config.get169Letterbox(tsn)):
aspect = '4:3'
else:
aspect = '16:9'
return ['-aspect', aspect, '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
else:
settings = ['-aspect']
multiplier16by9 = (16.0 * TIVO_HEIGHT) / (9.0 * TIVO_WIDTH) / par2
multiplier4by3 = (4.0 * TIVO_HEIGHT) / (3.0 * TIVO_WIDTH) / par2
ratio = vInfo['vWidth'] * 100 * par2 / vInfo['vHeight']
debug('par2=%.3f ratio=%.3f mult4by3=%.3f' % (par2, ratio,
multiplier4by3))
# If video is wider than 4:3 add top and bottom padding
if ratio > 133: # Might be 16:9 file, or just need padding on
# top and bottom
if aspect169 and ratio > 135: # If file would fall in 4:3
# assume it is supposed to be 4:3
if (config.get169Blacklist(tsn) or
config.get169Letterbox(tsn)):
settings.append('4:3')
else:
settings.append('16:9')
if ratio > 177: # too short needs padding top and bottom
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT,
multiplier16by9, vInfo)
debug(('16:9 aspect allowed, file is wider ' +
'than 16:9 padding top and bottom\n%s') %
' '.join(settings))
else: # too skinny needs padding on left and right.
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT,
multiplier16by9, vInfo)
debug(('16:9 aspect allowed, file is narrower ' +
'than 16:9 padding left and right\n%s') %
' '.join(settings))
else: # this is a 4:3 file or 16:9 output not allowed
if ratio > 135 and config.get169Letterbox(tsn):
settings.append('16:9')
multiplier = multiplier16by9
else:
settings.append('4:3')
multiplier = multiplier4by3
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT,
multiplier, vInfo)
debug(('File is wider than 4:3 padding ' +
'top and bottom\n%s') % ' '.join(settings))
# If video is taller than 4:3 add left and right padding, this
# is rare. All of these files will always be sent in an aspect
# ratio of 4:3 since they are so narrow.
else:
settings.append('4:3')
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT, multiplier4by3, vInfo)
debug('File is taller than 4:3 padding left and right\n%s'
% ' '.join(settings))
return settings
def select_aspect(inFile, tsn=""):
TIVO_WIDTH = config.getTivoWidth(tsn)
TIVO_HEIGHT = config.getTivoHeight(tsn)
vInfo = video_info(inFile)
debug("tsn: %s" % tsn)
aspect169 = config.get169Setting(tsn)
debug("aspect169: %s" % aspect169)
optres = config.getOptres(tsn)
debug("optres: %s" % optres)
if optres:
optHeight = config.nearestTivoHeight(vInfo["vHeight"])
optWidth = config.nearestTivoWidth(vInfo["vWidth"])
if optHeight < TIVO_HEIGHT:
TIVO_HEIGHT = optHeight
if optWidth < TIVO_WIDTH:
TIVO_WIDTH = optWidth
if vInfo.get("par2"):
par2 = vInfo["par2"]
elif vInfo.get("par"):
par2 = float(vInfo["par"])
else:
# Assume PAR = 1.0
par2 = 1.0
debug(
("File=%s vCodec=%s vWidth=%s vHeight=%s vFps=%s millisecs=%s " + "TIVO_HEIGHT=%s TIVO_WIDTH=%s")
% (
inFile,
vInfo["vCodec"],
vInfo["vWidth"],
vInfo["vHeight"],
vInfo["vFps"],
vInfo["millisecs"],
TIVO_HEIGHT,
TIVO_WIDTH,
)
)
if config.isHDtivo(tsn) and not optres:
if vInfo["par"]:
npar = par2
# adjust for pixel aspect ratio, if set
if npar < 1.0:
return ["-s", "%dx%d" % (vInfo["vWidth"], math.ceil(vInfo["vHeight"] / npar))]
elif npar > 1.0:
# FFMPEG expects width to be a multiple of two
return ["-s", "%dx%d" % (math.ceil(vInfo["vWidth"] * npar / 2.0) * 2, vInfo["vHeight"])]
if vInfo["vHeight"] <= TIVO_HEIGHT:
# pass all resolutions to S3, except heights greater than
# conf height
return []
# else, resize video.
d = gcd(vInfo["vHeight"], vInfo["vWidth"])
rheight, rwidth = vInfo["vHeight"] / d, vInfo["vWidth"] / d
debug("rheight=%s rwidth=%s" % (rheight, rwidth))
if (rwidth, rheight) in [(1, 1)] and vInfo["par1"] == "8:9":
debug("File + PAR is within 4:3.")
return ["-aspect", "4:3", "-s", "%sx%s" % (TIVO_WIDTH, TIVO_HEIGHT)]
elif (rwidth, rheight) in [(4, 3), (10, 11), (15, 11), (59, 54), (59, 72), (59, 36), (59, 54)] or vInfo[
"dar1"
] == "4:3":
debug("File is within 4:3 list.")
return ["-aspect", "4:3", "-s", "%sx%s" % (TIVO_WIDTH, TIVO_HEIGHT)]
elif ((rwidth, rheight) in [(16, 9), (20, 11), (40, 33), (118, 81), (59, 27)] or vInfo["dar1"] == "16:9") and (
aspect169 or config.get169Letterbox(tsn)
):
debug("File is within 16:9 list and 16:9 allowed.")
if config.get169Blacklist(tsn) or (aspect169 and config.get169Letterbox(tsn)):
aspect = "4:3"
else:
aspect = "16:9"
return ["-aspect", aspect, "-s", "%sx%s" % (TIVO_WIDTH, TIVO_HEIGHT)]
else:
settings = ["-aspect"]
multiplier16by9 = (16.0 * TIVO_HEIGHT) / (9.0 * TIVO_WIDTH) / par2
multiplier4by3 = (4.0 * TIVO_HEIGHT) / (3.0 * TIVO_WIDTH) / par2
ratio = vInfo["vWidth"] * 100 * par2 / vInfo["vHeight"]
debug("par2=%.3f ratio=%.3f mult4by3=%.3f" % (par2, ratio, multiplier4by3))
# If video is wider than 4:3 add top and bottom padding
if ratio > 133: # Might be 16:9 file, or just need padding on
# top and bottom
if aspect169 and ratio > 135: # If file would fall in 4:3
# assume it is supposed to be 4:3
if config.get169Blacklist(tsn) or config.get169Letterbox(tsn):
settings.append("4:3")
else:
settings.append("16:9")
if ratio > 177: # too short needs padding top and bottom
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT, multiplier16by9, vInfo)
debug(
("16:9 aspect allowed, file is wider " + "than 16:9 padding top and bottom\n%s")
% " ".join(settings)
)
else: # too skinny needs padding on left and right.
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT, multiplier16by9, vInfo)
debug(
("16:9 aspect allowed, file is narrower " + "than 16:9 padding left and right\n%s")
% " ".join(settings)
)
else: # this is a 4:3 file or 16:9 output not allowed
if ratio > 135 and config.get169Letterbox(tsn):
settings.append("16:9")
multiplier = multiplier16by9
else:
settings.append("4:3")
multiplier = multiplier4by3
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT, multiplier, vInfo)
debug(("File is wider than 4:3 padding " + "top and bottom\n%s") % " ".join(settings))
# If video is taller than 4:3 add left and right padding, this
# is rare. All of these files will always be sent in an aspect
# ratio of 4:3 since they are so narrow.
else:
settings.append("4:3")
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT, multiplier4by3, vInfo)
debug("File is taller than 4:3 padding left and right\n%s" % " ".join(settings))
return settings
def select_aspect(inFile, tsn=''):
TIVO_WIDTH = config.getTivoWidth(tsn)
TIVO_HEIGHT = config.getTivoHeight(tsn)
vInfo = video_info(inFile)
debug('tsn: %s' % tsn)
aspect169 = config.get169Setting(tsn)
debug('aspect169: %s' % aspect169)
optres = config.getOptres(tsn)
debug('optres: %s' % optres)
if optres:
optHeight = config.nearestTivoHeight(vInfo['vHeight'])
optWidth = config.nearestTivoWidth(vInfo['vWidth'])
if optHeight < TIVO_HEIGHT:
TIVO_HEIGHT = optHeight
if optWidth < TIVO_WIDTH:
TIVO_WIDTH = optWidth
if vInfo.get('par2'):
par2 = vInfo['par2']
elif vInfo.get('par'):
par2 = float(vInfo['par'])
else:
# Assume PAR = 1.0
par2 = 1.0
debug(('File=%s vCodec=%s vWidth=%s vHeight=%s vFps=%s millisecs=%s ' +
'TIVO_HEIGHT=%s TIVO_WIDTH=%s') %
(inFile, vInfo['vCodec'], vInfo['vWidth'], vInfo['vHeight'],
vInfo['vFps'], vInfo['millisecs'], TIVO_HEIGHT, TIVO_WIDTH))
if config.isHDtivo(tsn) and not optres:
if vInfo['par']:
npar = par2
# adjust for pixel aspect ratio, if set
if npar < 1.0:
return [
'-s',
'%dx%d' %
(vInfo['vWidth'], math.ceil(vInfo['vHeight'] / npar))
]
elif npar > 1.0:
# FFMPEG expects width to be a multiple of two
return [
'-s',
'%dx%d' % (math.ceil(vInfo['vWidth'] * npar / 2.0) * 2,
vInfo['vHeight'])
]
if vInfo['vHeight'] <= TIVO_HEIGHT:
# pass all resolutions to S3, except heights greater than
# conf height
return []
# else, resize video.
d = gcd(vInfo['vHeight'], vInfo['vWidth'])
rheight, rwidth = vInfo['vHeight'] / d, vInfo['vWidth'] / d
debug('rheight=%s rwidth=%s' % (rheight, rwidth))
if (rwidth, rheight) in [(1, 1)] and vInfo['par1'] == '8:9':
debug('File + PAR is within 4:3.')
return ['-aspect', '4:3', '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
elif ((rwidth, rheight) in [(4, 3), (10, 11), (15, 11), (59, 54), (59, 72),
(59, 36), (59, 54)] or vInfo['dar1'] == '4:3'):
debug('File is within 4:3 list.')
return ['-aspect', '4:3', '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
elif (((rwidth, rheight) in [(16, 9), (20, 11), (40, 33), (118, 81),
(59, 27)] or vInfo['dar1'] == '16:9')
and (aspect169 or config.get169Letterbox(tsn))):
debug('File is within 16:9 list and 16:9 allowed.')
if config.get169Blacklist(tsn) or (aspect169
and config.get169Letterbox(tsn)):
aspect = '4:3'
else:
aspect = '16:9'
return ['-aspect', aspect, '-s', '%sx%s' % (TIVO_WIDTH, TIVO_HEIGHT)]
else:
settings = ['-aspect']
multiplier16by9 = (16.0 * TIVO_HEIGHT) / (9.0 * TIVO_WIDTH) / par2
multiplier4by3 = (4.0 * TIVO_HEIGHT) / (3.0 * TIVO_WIDTH) / par2
ratio = vInfo['vWidth'] * 100 * par2 / vInfo['vHeight']
debug('par2=%.3f ratio=%.3f mult4by3=%.3f' %
(par2, ratio, multiplier4by3))
# If video is wider than 4:3 add top and bottom padding
if ratio > 133: # Might be 16:9 file, or just need padding on
# top and bottom
if aspect169 and ratio > 135: # If file would fall in 4:3
# assume it is supposed to be 4:3
if (config.get169Blacklist(tsn)
or config.get169Letterbox(tsn)):
settings.append('4:3')
else:
settings.append('16:9')
if ratio > 177: # too short needs padding top and bottom
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT,
multiplier16by9, vInfo)
debug(('16:9 aspect allowed, file is wider ' +
'than 16:9 padding top and bottom\n%s') %
' '.join(settings))
else: # too skinny needs padding on left and right.
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT,
multiplier16by9, vInfo)
debug(('16:9 aspect allowed, file is narrower ' +
'than 16:9 padding left and right\n%s') %
' '.join(settings))
else: # this is a 4:3 file or 16:9 output not allowed
if ratio > 135 and config.get169Letterbox(tsn):
settings.append('16:9')
multiplier = multiplier16by9
else:
settings.append('4:3')
multiplier = multiplier4by3
settings += pad_TB(TIVO_WIDTH, TIVO_HEIGHT, multiplier, vInfo)
debug(
('File is wider than 4:3 padding ' + 'top and bottom\n%s')
% ' '.join(settings))
# If video is taller than 4:3 add left and right padding, this
# is rare. All of these files will always be sent in an aspect
# ratio of 4:3 since they are so narrow.
else:
settings.append('4:3')
settings += pad_LR(TIVO_WIDTH, TIVO_HEIGHT, multiplier4by3, vInfo)
debug('File is taller than 4:3 padding left and right\n%s' %
' '.join(settings))
return settings
